Reimplement the `bisect_replay` shell function in C and also add
`--bisect-replay` subcommand to `git bisect--helper` to call it from
git-bisect.sh
Using `--bisect-replay` subcommand is a temporary measure to port shell
function to C so as to use the existing test suite.
Mentored-by: Lars Schneider <larsxschneider@gmail.com>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com>
Signed-off-by: Miriam Rubio <mirucam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reimplement the `bisect_log()` shell function in C and also add
`--bisect-log` subcommand to `git bisect--helper` to call it from
git-bisect.sh .
Using `--bisect-log` subcommand is a temporary measure to port shell
function to C so as to use the existing test suite.
Mentored-by: Lars Schneider <larsxschneider@gmail.com>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Helped-by: Rafael Silva <rafaeloliveira.cs@gmail.com>
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com>
Signed-off-by: Miriam Rubio <mirucam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reimplement the `bisect_state()` shell functions in C and also add a
subcommand `--bisect-state` to `git-bisect--helper` to call them from
git-bisect.sh .
Using `--bisect-state` subcommand is a temporary measure to port shell
function to C so as to use the existing test suite. As more functions
are ported, this subcommand will be retired and will be called by some
other methods.
`bisect_head()` is only called from `bisect_state()`, thus it is not
required to introduce another subcommand.
Note that the `eval` in the changed line of `git-bisect.sh` cannot be
dropped: it is necessary because the `rev` and the `tail`
variables may contain multiple, quoted arguments that need to be
passed to `bisect--helper` (without the quotes, naturally).
Mentored-by: Lars Schneider <larsxschneider@gmail.com>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com>
Signed-off-by: Miriam Rubio <mirucam@gmail.com>
Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the subcommand to `git bisect--helper` and call it from
git-bisect.sh.
With the conversion of `bisect_auto_next()` from shell to C in a
previous commit, `bisect_start()` can now be fully ported to C.
So let's complete the `--bisect-start` subcommand of
`git bisect--helper` so that it fully implements `bisect_start()`,
and let's use this subcommand in `git-bisect.sh` instead of
`bisect_start()`.
Note that the `eval` in the changed line of `git-bisect.sh` cannot be
dropped: it is necessary because the `rev` and the `tail`
variables may contain multiple, quoted arguments that need to be
passed to `bisect--helper` (without the quotes, naturally).
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com>
Signed-off-by: Miriam Rubio <mirucam@gmail.com>
Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rewrite of the "git bisect" script in C continues.
* mr/bisect-in-c-2:
bisect--helper: reimplement `bisect_next` and `bisect_auto_next` shell functions in C
bisect: call 'clear_commit_marks_all()' in 'bisect_next_all()'
bisect--helper: reimplement `bisect_autostart` shell function in C
bisect--helper: introduce new `write_in_file()` function
bisect--helper: use '-res' in 'cmd_bisect__helper' return
bisect--helper: BUG() in cmd_*() on invalid subcommand
Reimplement the `bisect_next()` and the `bisect_auto_next()` shell functions
in C and add the subcommands to `git bisect--helper` to call them from
git-bisect.sh .
bisect_auto_next() function returns an enum bisect_error type as whole
`git bisect` can exit with an error code when bisect_next() does.
Return an error when `bisect_next()` fails, that fix a bug on shell script
version.
Using `--bisect-next` and `--bisect-auto-next` subcommands is a
temporary measure to port shell function to C so as to use the existing
test suite. As more functions are ported, `--bisect-auto-next`
subcommand will be retired and will be called by some other methods.
Mentored-by: Lars Schneider <larsxschneider@gmail.com>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com>
Signed-off-by: Miriam Rubio <mirucam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reimplement the `bisect_autostart()` shell function in C and add the
C implementation from `bisect_next()` which was previously left
uncovered.
Add `--bisect-autostart` subcommand to be called from git-bisect.sh.
Using `--bisect-autostart` subcommand is a temporary measure to port
the shell function to C so as to use the existing test suite. As more
functions are ported, this subcommand will be retired and
bisect_autostart() will be called directly by `bisect_state()`.
Change behavior of shell script that returned success when user aborted
the bisection.
Mentored-by: Lars Schneider <larsxschneider@gmail.com>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com>
Signed-off-by: Miriam Rubio <mirucam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The positional arguments are specified in this order: "bad" then "good".
To avoid confusion, the options above the positional arguments
are now specified in the same order. They can still be specified in any
order since they're options, not positional arguments.
Signed-off-by: Hugo Locurcio <hugo.locurcio@hugo.pro>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ensure that the [--first-parent] option is listed in the output of
"git bisect -h".
Signed-off-by: Aaron Lipman <alipman88@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git bisect" learns the "--first-parent" option to find the first
breakage along the first-parent chain.
* al/bisect-first-parent:
bisect: combine args passed to find_bisection()
bisect: introduce first-parent flag
cmd_bisect__helper: defer parsing no-checkout flag
rev-list: allow bisect and first-parent flags
t6030: modernize "git bisect run" tests
cmd_bisect__helper() is intended as a temporary shim layer serving as an
interface for git-bisect.sh. This function and git-bisect.sh should
eventually be replaced by a C implementation, cmd_bisect(), serving as
an entrypoint for all "git bisect ..." shell commands: cmd_bisect() will
only parse the first token following "git bisect", and dispatch the
remaining args to the appropriate function ["bisect_start()",
"bisect_next()", etc.].
Thus, cmd_bisect__helper() should not be responsible for parsing flags
like --no-checkout. Instead, let the --no-checkout flag remain in the
argv array, so it may be evaluated alongside the other options already
parsed by bisect_start().
Signed-off-by: Aaron Lipman <alipman88@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Both the git-bisect.sh as bisect--helper inspected the file system
directly.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
6c722cbe5a (bisect: allow CRLF line endings in "git bisect replay"
input, 2020-05-07) includes CR as a field separator, but relies on
it not being included in the last field, which breaks at least when
running under OpenBSD 6.7's sh.
Instead of just assume the CR will get swallowed, read the rest of
the line into an otherwise unused variable and ignore it everywhere
except on the call for git bisect start, where it matters.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We advertise that the bisect log can be corrected in your editor
before being fed to "git bisect replay", but some editors may
turn the line endings to CRLF.
Update the parser of the input lines so that the CR at the end of
the line gets ignored.
Were anyone to intentionally be using terms/revs with embedded CRs,
replaying such bisects will no longer work with this change. I suspect
that this is incredibly rare.
Signed-off-by: Christopher Warrington <chwarr@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reimplement the `bisect_start` shell function partially in C and add
`bisect-start` subcommand to `git bisect--helper` to call it from
git-bisect.sh .
The last part is not converted because it calls another shell function.
`bisect_start` shell function will be completed after the `bisect_next`
shell function is ported in C.
Using `--bisect-start` subcommand is a temporary measure to port shell
function in C so as to use the existing test suite. As more functions
are ported, this subcommand will be retired and will be called by some
other methods.
Also introduce a method `bisect_append_log_quoted` to keep things short
and crisp.
Note that we are a bit lax about command-line parsing because the helper
is not supposed to be called by the user directly (but only from the git
bisect script).
Helped-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Helped-by: Stephan Beyer <s-beyer@gmx.net>
Mentored-by: Lars Schneider <larsxschneider@gmail.com>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reimplement the `get_terms` and `bisect_terms` shell function in C and
add `bisect-terms` subcommand to `git bisect--helper` to call it from
git-bisect.sh .
Using `--bisect-terms` subcommand is a temporary measure to port shell
function in C so as to use the existing test suite. As more functions
are ported, this subcommand will be retired but its implementation will
be called by some other methods.
Also use error() to report "no terms defined" and accordingly change the
test in t6030.
We need to use PARSE_OPT_KEEP_UNKNOWN here to allow for parameters that
look like options (e.g --term-good) but should not be parsed by
cmd_bisect__helper(). This change is safe because all other cmdmodes have
strict argc checks already.
Mentored-by: Lars Schneider <larsxschneider@gmail.com>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reimplement `bisect_next_check` shell function in C and add
`bisect-next-check` subcommand to `git bisect--helper` to call it from
git-bisect.sh .
`bisect_voc` shell function is no longer useful now and is replaced by
using a char *[] of "new|bad" and "good|old" values.
Using `--bisect-next-check` is a temporary measure to port shell
function to C so as to use the existing test suite. As more functions
are ported, this subcommand will be retired but its implementation will
be called by some other methods.
Helped-by: Stephan Beyer <s-beyer@gmx.net>
Mentored-by: Lars Schneider <larsxschneider@gmail.com>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reimplement the `check_and_set_terms` shell function in C and add
`check-and-set-terms` subcommand to `git bisect--helper` to call it from
git-bisect.sh
Using `--check-and-set-terms` subcommand is a temporary measure to port
shell function in C so as to use the existing test suite. As more
functions are ported, this subcommand will be retired but its
implementation will be called by some other methods.
check_and_set_terms() sets and receives two global variables namely
TERM_GOOD and TERM_BAD in the shell script. Luckily the file BISECT_TERMS
also contains the value of those variables so its appropriate to evoke the
method get_terms() after calling the subcommand so that it retrieves the
value of TERM_GOOD and TERM_BAD from the file BISECT_TERMS. The two
global variables are passed as arguments to the subcommand.
Mentored-by: Lars Schneider <larsxschneider@gmail.com>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reimplement the `bisect_write` shell function in C and add a
`bisect-write` subcommand to `git bisect--helper` to call it from
git-bisect.sh
Using `--bisect-write` subcommand is a temporary measure to port shell
function in C so as to use the existing test suite. As more functions
are ported, this subcommand will be retired but its implementation will
be called by some other methods.
Note: bisect_write() uses two variables namely TERM_GOOD and TERM_BAD
from the global shell script thus we need to pass it to the subcommand
using the arguments. We then store them in a struct bisect_terms and
pass the memory address around functions.
Add a log_commit() helper function to write the contents of the commit message
header to a file which will be re-used in future parts of the code as
well.
Also introduce a function free_terms() to free the memory of `struct
bisect_terms` and set_terms() to set the values of members in `struct
bisect_terms`.
Helped-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Mentored-by: Lars Schneider <larsxschneider@gmail.com>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reimplement `bisect_reset` shell function in C and add a `--bisect-reset`
subcommand to `git bisect--helper` to call it from git-bisect.sh .
Using `bisect_reset` subcommand is a temporary measure to port shell
functions to C so as to use the existing test suite. As more functions
are ported, this subcommand would be retired but its implementation will
be called by some other method.
Note: --bisect-clean-state subcommand has not been retired as there are
still a function namely `bisect_start()` which still uses this
subcommand.
Mentored-by: Lars Schneider <larsxschneider@gmail.com>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git bisect run" that did not specify any command to run used to go
ahead and treated all commits to be tested as 'good'. This has
been corrected by making the command error out.
* sb/bisect-run-empty:
bisect run: die if no command is given
It was possible to invoke "git bisect run" without any command.
This considers all commits as good commits since "$@"'s return
value for empty $@ is 0.
This is most probably not what a user wants (otherwise she would
invoke "git bisect run true"), so not providing a command now
results in an error.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tweak a small number of files to mention "view" as an alternative to
"visualize".
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reimplement `is_expected_rev` & `check_expected_revs` shell function in
C and add a `--check-expected-revs` subcommand to `git bisect--helper` to
call it from git-bisect.sh .
Using `--check-expected-revs` subcommand is a temporary measure to port
shell functions to C so as to use the existing test suite. As more
functions are ported, this subcommand would be retired but its
implementation will be called by some other method.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Mentored-by: Lars Schneider <larsxschneider@gmail.com>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reimplement `bisect_clean_state` shell function in C and add a
`bisect-clean-state` subcommand to `git bisect--helper` to call it from
git-bisect.sh .
Using `--bisect-clean-state` subcommand is a measure to port shell
function to C so as to use the existing test suite. As more functions
are ported, this subcommand will be retired but its implementation will
be called by bisect_reset() and bisect_start().
Also introduce a function `mark_for_removal` to store the refs which
need to be removed while iterating through the refs.
Mentored-by: Lars Schneider <larsxschneider@gmail.com>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reimplement the `write_terms` shell function in C and add a `write-terms`
subcommand to `git bisect--helper` to call it from git-bisect.sh . Also
remove the subcommand `--check-term-format` as it can now be called from
inside the function write_terms() C implementation.
Also `|| exit` is added when calling write-terms subcommand from
git-bisect.sh so as to exit whenever there is an error.
Using `--write-terms` subcommand is a temporary measure to port shell
function to C so as to use the existing test suite. As more functions
are ported, this subcommand will be retired and its implementation will
be called by some other method.
Mentored-by: Lars Schneider <larsxschneider@gmail.com>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reimplement the `check_term_format` shell function in C and add
a `--check-term-format` subcommand to `git bisect--helper` to call it
from git-bisect.sh
Using `--check-term-format` subcommand is a temporary measure to port
shell function to C so as to use the existing test suite. As more
functions are ported, this subcommand will be retired and its
implementation will be called by some other method/subcommand. For
eg. In conversion of write_terms() of git-bisect.sh, the subcommand will
be removed and instead check_term_format() will be called in its C
implementation while a new subcommand will be introduced for write_terms().
Helped-by: Johannes Schindelein <Johannes.Schindelein@gmx.de>
Mentored-by: Lars Schneider <larsxschneider@gmail.com>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These messages are relevant for the programmer only, not for the end
user. Thus, they can be unmarked for translation, saving translator
some work.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Positional arguments, such as $0, $1, etc, need to be stored on shell
variables for use in translatable strings, according to gettext manual
[1].
Add git-sh-setup.sh to LOCALIZED_SH variable in Makefile to enable
extraction of string marked for translation by xgettext.
Source git-sh-i18n in git-sh-setup.sh for gettext support.
git-sh-setup.sh is a shell library to be sourced by other shell scripts.
In order to avoid other scripts from sourcing git-sh-i18n twice, remove
line that sources it from them. Not sourcing git-sh-i18n in any script
that uses gettext would lead to failure due to, for instance, gettextln
not being found.
[1] http://www.gnu.org/software/gettext/manual/html_node/Preparing-Shell-Scripts.html
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The message was not being extracted by xgettext, although it was marked
for translation, seemingly because it contained a command substitution.
Moreover, eval_gettext should be used instead of gettext for strings
with substitution.
See step 4. of section 15.5.2.1 Preparing Shell Scripts for
Internationalization from gettext manual [1]:
"Simplify translatable strings so that they don't contain command
substitution ("`...`" or "$(...)") [...]"
[1] http://www.gnu.org/software/gettext/manual/html_node/Preparing-Shell-Scripts.html
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows a natural user-interface when looking for any change in the
code, not just regression. For example:
git bisect start --term-old fast --term-new slow
git bisect fast
git bisect slow
...
There were several proposed user-interfaces for this feature. This patch
implements it as options to 'git bisect start' for the following reasons:
* By construction, the terms will be valid for one and only one
bisection.
* Unlike positional arguments, using named options avoid having to
remember an order.
* We can combine user-defined terms and passing old/new commits as
argument to "git bisect start".
* The implementation is relatively simple.
See previous discussions:
http://mid.gmane.org/1435337896-20709-3-git-send-email-Matthieu.Moy@imag.fr
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When not looking for a regression during a bisect but for a fix or a
change in another given property, it can be confusing to use 'good'
and 'bad'.
This patch introduce `git bisect new` and `git bisect old` as an
alternative to 'bad' and good': the commits which have a certain
property must be marked as `new` and the ones which do not as `old`.
The output will be the first commit after the change in the property.
During a new/old bisect session you cannot use bad/good commands and
vice-versa.
Some commands are still not available for old/new:
* git rev-list --bisect does not treat the revs/bisect/new and
revs/bisect/old-SHA1 files.
Old discussions:
- http://thread.gmane.org/gmane.comp.version-control.git/86063
introduced bisect fix unfixed to find fix.
- http://thread.gmane.org/gmane.comp.version-control.git/182398
discussion around bisect yes/no or old/new.
- http://thread.gmane.org/gmane.comp.version-control.git/199758
last discussion and reviews
New discussions:
- http://thread.gmane.org/gmane.comp.version-control.git/271320
( v2 1/7-4/7 )
- http://comments.gmane.org/gmane.comp.version-control.git/271343
( v2 5/7-7/7 )
Signed-off-by: Antoine Delaite <antoine.delaite@ensimag.grenoble-inp.fr>
Signed-off-by: Louis Stuber <stuberl@ensimag.grenoble-inp.fr>
Signed-off-by: Valentin Duperray <Valentin.Duperray@ensimag.imag.fr>
Signed-off-by: Franck Jonas <Franck.Jonas@ensimag.imag.fr>
Signed-off-by: Lucien Kong <Lucien.Kong@ensimag.imag.fr>
Signed-off-by: Thomas Nguy <Thomas.Nguy@ensimag.imag.fr>
Signed-off-by: Huynh Khoi Nguyen Nguyen <Huynh-Khoi-Nguyen.Nguyen@ensimag.imag.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is currently only a defensive check since the only terms are
bad/good and new/old, which pass it, but this is a preparation step for
accepting user-supplied terms.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As-is, the revisions that appear on the command-line are processed in
order. This would mix badly with code that changes the configuration
(e.g. change $TERM_GOOD and $TERM_BAD) while processing the options.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We create a file BISECT_TERMS in the repository .git to be read during a
bisection. There's no user-interface yet, but "git bisect" works if terms
other than old/new or bad/good are set in .git/BISECT_TERMS. The
fonctions to be changed if we add new terms are quite few.
In git-bisect.sh:
check_and_set_terms
bisect_voc
Co-authored-by: Louis Stuber <stuberl@ensimag.grenoble-inp.fr>
Tweaked-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Antoine Delaite <antoine.delaite@ensimag.grenoble-inp.fr>
Signed-off-by: Louis Stuber <stuberl@ensimag.grenoble-inp.fr>
Signed-off-by: Valentin Duperray <Valentin.Duperray@ensimag.imag.fr>
Signed-off-by: Franck Jonas <Franck.Jonas@ensimag.imag.fr>
Signed-off-by: Lucien Kong <Lucien.Kong@ensimag.imag.fr>
Signed-off-by: Thomas Nguy <Thomas.Nguy@ensimag.imag.fr>
Signed-off-by: Huynh Khoi Nguyen Nguyen <Huynh-Khoi-Nguyen.Nguyen@ensimag.imag.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To add new tags like old/new and have keywords less confusing, the
first step is to avoid hardcoding the keywords.
The default mode is still bad/good.
Signed-off-by: Antoine Delaite <antoine.delaite@ensimag.grenoble-inp.fr>
Signed-off-by: Louis Stuber <stuberl@ensimag.grenoble-inp.fr>
Signed-off-by: Valentin Duperray <Valentin.Duperray@ensimag.imag.fr>
Signed-off-by: Franck Jonas <Franck.Jonas@ensimag.imag.fr>
Signed-off-by: Lucien Kong <Lucien.Kong@ensimag.imag.fr>
Signed-off-by: Thomas Nguy <Thomas.Nguy@ensimag.imag.fr>
Signed-off-by: Huynh Khoi Nguyen Nguyen <Huynh-Khoi-Nguyen.Nguyen@ensimag.imag.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch puts the usage info strings that were not already in docopt-
like format into docopt-like format, which will be a litle easier for
end users and a lot easier for translators. Changes include:
- Placing angle brackets around fill-in-the-blank parameters
- Putting dashes in multiword parameter names
- Adding spaces to [-f|--foobar] to make [-f | --foobar]
- Replacing <foobar>* with [<foobar>...]
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running for example "git bisect bad HEAD" or
"git bisect good master", the parameter passed to
"git bisect (bad|good)" has to be parsed into a
commit hash before checking if it is the expected
commit or not.
We could do that in is_expected_rev() or in
check_expected_revs(), but it is already done in
bisect_state(). Let's just store the hash values
that result from this parsing, and then reuse
them after all the parsing is done.
This way we can also use a for loop over these
values to call bisect_write() on them, instead of
using eval.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The construct is error-prone; "test" being built-in in most modern
shells, the reason to avoid "test <cond> && test <cond>" spawning
one extra process by using a single "test <cond> -a <cond>" no
longer exists.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Redirection operators should have a space before them, but not after them.
Signed-off-by: Jacopo Notarstefano <jacopo.notarstefano@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The bisect log output of skipped commits introduced in f989cac "bisect:
Log possibly bad, skipped commits at bisection end" should obtain the range of
skipped commits from
git rev-list bad --not good-1 good-2
not
git rev-list bad --not good-1 --not good-2
when the skipped range contains a merge with good points in each parent.
Signed-off-by: Torstein Hegge <hegge@resisty.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the bisection completes with only skipped commits left to as possible
first bad commit, output the list of possible first bad commits to human
readers of the bisection log.
Signed-off-by: Torstein Hegge <hegge@resisty.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When bisect successfully finds a single revision, the first bad commit
should be shown to human readers of 'git bisect log'.
This resolves the apparent disconnect between the bisection result and
the log when a bug reporter says "I know that the first bad commit is
$rev, as you can see from $(git bisect log)".
Signed-off-by: Torstein Hegge <hegge@resisty.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
