The parser tried to clean up the object flags it used while finding
commits with matching string, but was not doing a very good job at it.
This caused "checkout -b new ':/token'", which internally tries to parse
':/token' twice as an object name, to fail when the commit in question
was reachable from only one ref.
The mask bits given to pop_most_recent_commit(&list, MASK) means "I have
already been on the list to be processed, so please do not place me again
even if I am found to be a parent of some other commit on the list." So
mark them when we add them to the list at the beginning.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cp/textconv-cat-file:
git-cat-file.txt: Document --textconv
t/t8007: test textconv support for cat-file
textconv: support for cat_file
sha1_name: add get_sha1_with_context()
Textconv is defined by the diff driver, which is associated with a pathname,
not a blob. This fonction permits to know the context for the sha1 you're
looking for, especially his pathname
Signed-off-by: Clément Poulain <clement.poulain@ensimag.imag.fr>
Signed-off-by: Diane Gasselin <diane.gasselin@ensimag.imag.fr>
Signed-off-by: Axel Bonnet <axel.bonnet@ensimag.imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This also makes it trigger anywhere in the commit message, rather than
just at the beginning. Which tends to be a lot more useful.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code to see if user input "git show :path" makes sense tried to access
the index without properly checking the array bound.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint-1.6.6:
dwim_ref: fix dangling symref warning
stash pop: remove 'apply' options during 'drop' invocation
diff: make sure --output=/bad/path is caught
Remove hyphen from "git-command" in two error messages
If we encounter a symref that is dangling, in most cases we will warn
about it. The one exception is a dangling HEAD, as that indicates a
branch yet to be born.
However, the check in dwim_ref was not quite right. If we were fed
something like "HEAD^0" we would try to resolve "HEAD", see that it is
dangling, and then check whether the _original_ string we got was
"HEAD" (which it wasn't in this case). And that makes no sense; the
dangling thing we found was not "HEAD^0" but rather "HEAD".
Fixing this squelches a scary warning from "submodule summary HEAD" (and
consequently "git status" with status.submodulesummary set) in an empty
repo, as the submodule script calls "git rev-parse -q --verify HEAD^0".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Something like foo@{-1} is nonsensical, as the @{-N} syntax
is reserved for "the Nth last branch", and is not an actual
reflog selector. We should not feed such nonsense to
approxidate at all.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously interpret_branch_name would see @{-1} and stop
parsing, leaving the @{u} as cruft that provoked an error.
Instead, we should recurse if there is more to parse.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/maint-reflog-bad-timestamp:
t0101: use a fixed timestamp when searching in the reflog
Update @{bogus.timestamp} fix not to die()
approxidate_careful() reports errorneous date string
The caller will say "It is not a valid object name" if it wants to, and
some callers may even try to see if it names an object and otherwise try to
see if it is a path.
Pointed out by Jeff King.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For a long time, the time based reflog syntax (e.g. master@{yesterday})
didn't complain when the "human readable" timestamp was misspelled, as
the underlying mechanism tried to be as lenient as possible. The funny
thing was that parsing of "@{now}" even relied on the fact that anything
not recognized by the machinery returned the current timestamp.
Introduce approxidate_careful() that takes an optional pointer to an
integer, that gets assigned 1 when the input does not make sense as a
timestamp.
As I am too lazy to fix all the callers that use approxidate(), most of
the callers do not take advantage of the error checking, but convert the
code to parse reflog to use it as a demonstration.
Tests are mostly from Jeff King.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This teaches @{upstream} syntax to interpret_branch_name(), instead
of dwim_ref() machinery.
There are places in git UI that behaves differently when you give a local
branch name and when you give an extended SHA-1 expression that evaluates
to the commit object name at the tip of the branch. The intent is that
the special syntax such as @{-1} can stand in as if the user spelled the
name of the branch in such places.
The name of the branch "frotz" to switch to ("git checkout frotz"), and
the name of the branch "nitfol" to fork a new branch "frotz" from ("git
checkout -b frotz nitfol"), are examples of such places. These places
take only the name of the branch (e.g. "frotz"), and they are supposed to
act differently to an equivalent refname (e.g. "refs/heads/frotz"), so
hooking the @{upstream} and @{-N} syntax to dwim_ref() is insufficient
when we want to deal with cases a local branch is forked from another
local branch and use "forked@{upstream}" to name the forkee branch.
The "upstream" syntax "forked@{u}" is to specify the ref that "forked" is
configured to merge with, and most often the forkee is a remote tracking
branch, not a local branch. We cannot simply return a local branch name,
but that does not necessarily mean we have to returns the full refname
(e.g. refs/remotes/origin/frotz, when returning origin/frotz is enough).
This update calls shorten_unambiguous_ref() to do so.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/checkout-merge-base:
rebase -i: teach --onto A...B syntax
rebase: fix --onto A...B parsing and add tests
"rebase --onto A...B" replays history on the merge base between A and B
"checkout A...B" switches to the merge base between A and B
A new notation '<branch>@{upstream}' refers to the branch <branch> is set
to build on top of. Missing <branch> (i.e. '@{upstream}') defaults to the
current branch.
This allows you to run, for example,
for l in list of local branches
do
git log --oneline --left-right $l...$l@{upstream}
done
to inspect each of the local branches you are interested in for the
divergence from its upstream.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous error message was the same in many situations (unknown
revision or path not in the working tree). We try to help the user as
much as possible to understand the error, especially with the
sha1:filename notation. In this case, we say whether the sha1 or the
filename is problematic, and diagnose the confusion between
relative-to-root and relative-to-$PWD confusion precisely.
The 7 new error messages are tested.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When flipping commits around on topic branches, I often end up doing
this sequence:
* Run "log --oneline next..jc/frotz" to find out the first commit
on 'jc/frotz' branch not yet merged to 'next';
* Run "checkout $that_commit^" to detach HEAD to the parent of it;
* Rebuild the series on top of that commit; and
* "show-branch jc/frotz HEAD" and "diff jc/frotz HEAD" to verify.
Introduce a new syntax to "git checkout" to name the commit to switch to,
to make the first two steps easier. When the branch to switch to is
specified as A...B (you can omit either A or B but not both, and HEAD
is used instead of the omitted side), the merge base between these two
commits are computed, and if there is one unique one, we detach the HEAD
at that commit.
With this, I can say "checkout next...jc/frotz".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we fall back to a standard for_each_reflog_ent() after failing to find
the nth branch switch (or if we had a short reflog) with the call to
for_each_recent_reflog_ent(), we do not need to free the memory allocated
for our strbuf's since a strbuf_reset() will be performed in
grab_nth_branch_switch() before assigning to the entry.
Plus, the strbuf_release() negates the non-zero hint we initially gave to
strbuf_init() just above these lines.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These allow you to say "git checkout @{-2}" to switch to the branch two
"branch switching" ago by pretending as if you typed the name of that
branch. As it is likely that we will be introducing more short-hands to
write the name of a branch without writing it explicitly, rename the
functions from "nth_last_branch" to more generic "branch_name", to prepare
for different semantics.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
057e713 (Warn use of "origin" when remotes/origin/HEAD is dangling,
2009-02-08) tried to warn dangling refs/remotes/origin/HEAD only when
"origin" was used to refer to it. There was one corner case a symref is
expected to be dangling and this warning is unwarranted: HEAD in an empty
repository.
This squelches the warning for this special case.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous one squelched the diagnositic message we used to issue every
time we enumerated the refs and noticed a dangling ref. This adds the
warning back to the place where the user actually attempts to use it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When get_sha1_basic() is passed a buffer of len 0, it should not
check if buf[len-1] is a curly bracket.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We only accept "checkout: moving from A to B" newer style reflog entries,
in order to pick up A. There is no point computing where B begins at
after running strstr to locate " to ", nor adding 4 and then subtracting 4
from the same pointer.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This can be used to scan only the last few kilobytes of a reflog, as a
cheap optimization when the data you are looking for is likely to be
found near the end of it. The caller is expected to fall back to the
full scan if that is not the case.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To do that, Git no longer looks forward for the '@{' corresponding to the
closing '}' but backward, and dwim_ref() as well as dwim_log() learnt
about the @{-<N>} notation.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
You can have quite a many reflog entries, but you typically won't recall
which branch you were on after switching branches for more than several
times.
Instead of reading the reflog twice, this reads the branch switching event
and keeps as many entries as the user asked from the latest such entries,
which is the minimum required to be able to switch back to the branch we
were recently on.
[jc: improvements from Dscho squashed in]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Let get_sha1() parse the @{-N} syntax, with docs and tests.
Note that while @{-1}^2, @{-2}~5 and such are supported, @{-1}@{1} is
currently not allowed.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Have the lookup only look at "interesting" checkouts, meaning those
that tell you "Already on ..." don't count even though they also cause
a reflog entry.
Let interpret_nth_last_branch() return the number of characters
parsed, so that git-checkout can verify that the branch spec was
@{-N}, not @{-1}^2 or something like that. (The latter will be added
later.)
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Implement a shortcut @{-N} for the N-th last branch checked out, that
works by parsing the reflog for the message added by previous
git-checkout invocations. We expand the @{-N} to the branch name, so
that you end up on an attached HEAD on that branch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ar/maint-mksnpath:
Fix potentially dangerous uses of mkpath and git_path
Fix mkpath abuse in dwim_ref and dwim_log of sha1_name.c
Add mksnpath which allows you to specify the output buffer
Otherwise the function sometimes fail to resolve obviously correct
refnames, because the string data pointed to by "str" argument were
reused.
The change in dwim_log does not fix anything, just optimizes away
strcpy code as the path can be created directly in the available
buffer.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As we support seconds-since-epoch in $GIT_COMMITTER_TIME we should
also support it in a reflog @{...} style notation. We can easily
tell this part from @{nth} style notation by looking to see if the
value is unreasonably large for an @{nth} style notation.
The value 100000000 was chosen as it is already used by date.c to
disambiguate yyyymmdd format from a seconds-since-epoch time value.
A reflog with 100,000,000 record entries is also simply not valid.
Such a reflog would require at least 7.7 GB to store just the old
and new SHA-1 values. So our randomly chosen upper limit for @{nth}
notation is "big enough".
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
f2eba66 (Enable HEAD@{...} and make it independent from the current
branch, 2007-02-03) introduced dwim_log() to handle <refname>@{...}
syntax, and as part of its processing, it checks if the ref exists by
calling refsolve_ref(). It should call it as a reader to make sure the
call returns NULL for a nonexistent ref (not as a potential writer in
which case it does not return NULL).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In get_sha1_basic, we parse a string like
HEAD@{10 seconds ago}:path/to/file
into its constituent ref, reflog date, and path components.
We never actually munge the string itself, but instead keep
offsets into the string with their associated lengths.
When we call approxidate on the contents inside braces,
however, we pass just a string without a length. This means
that approxidate could sometimes look past the closing brace
and (erroneously) interpret the rest of the string as part
of the date.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Make man page building quiet when DOCBOOK_XSL_172 is defined
git-new-workdir: Share SVN meta data between work dirs and the repository
rev-parse: fix meaning of rev~ vs rev~0.
git-svn: don't blindly append '*' to branch/tags config
I think it would make more sense for rev~ to have the same guarantees that
rev^ has, namely to always return a commit. I would also suggest that not
giving a number would have the same effect of defaulting to 1, not 0.
Right now it's a bit illogical, but at least it's an _undocumented_
illogical behaviour.
This patch makes '^' and '~' act the same for the default count (i.e. both
default to 1), and also have the same behaviour for a count of zero.
Before (no discernible pattern):
[torvalds@woody git]$ git rev-parse v1.5.1 v1.5.1^0 v1.5.1~0 v1.5.1^ v1.5.1~
45354a57ee7e3e42c7137db6c94fa968c6babe8d
89815cab95
45354a57ee7e3e42c7137db6c94fa968c6babe8d
045f5759c9
45354a57ee7e3e42c7137db6c94fa968c6babe8d
After (fairly logical):
[torvalds@woody git]$ git rev-parse v1.5.1 v1.5.1^0 v1.5.1~0 v1.5.1^ v1.5.1~
45354a57ee7e3e42c7137db6c94fa968c6babe8d
89815cab9589815cab95045f5759c9045f5759c9
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function returned NULL when no object that matches the name
was found, but that made the callers more complicated, as nobody
used that NULL return as an indication that no object with such
a name exists. They (at least the careful ones) instead took
the full 40-hexdigit and used in such a case, and the careless
ones segfaulted.
With this "git rev-parse --short 5555555555555555555555555555555555555555"
would stop segfaulting.
This is based on Jeff King's rewrite to my RFC patch, but "missing"
logic swapped to "exists". The final logic reads:
For existing objects, make sure the abbreviated string uniquely
identifies it. Otherwise, make sure the abbreviated string is
long enough so that it would not name any existing object.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This change removes all obvious useless if-before-free tests.
E.g., it replaces code like this:
if (some_expression)
free (some_expression);
with the now-equivalent:
free (some_expression);
It is equivalent not just because POSIX has required free(NULL)
to work for a long time, but simply because it has worked for
so long that no reasonable porting target fails the test.
Here's some evidence from nearly 1.5 years ago:
http://www.winehq.org/pipermail/wine-patches/2006-October/031544.html
FYI, the change below was prepared by running the following:
git ls-files -z | xargs -0 \
perl -0x3b -pi -e \
's/\bif\s*\(\s*(\S+?)(?:\s*!=\s*NULL)?\s*\)\s+(free\s*\(\s*\1\s*\))/$2/s'
Note however, that it doesn't handle brace-enclosed blocks like
"if (x) { free (x); }". But that's ok, since there were none like
that in git sources.
Beware: if you do use the above snippet, note that it can
produce syntactically invalid C code. That happens when the
affected "if"-statement has a matching "else".
E.g., it would transform this
if (x)
free (x);
else
foo ();
into this:
free (x);
else
foo ();
There were none of those here, either.
If you're interested in automating detection of the useless
tests, you might like the useless-if-before-free script in gnulib:
[it *does* detect brace-enclosed free statements, and has a --name=S
option to make it detect free-like functions with different names]
http://git.sv.gnu.org/gitweb/?p=gnulib.git;a=blob;f=build-aux/useless-if-before-free
Addendum:
Remove one more (in imap-send.c), spotted by Jean-Luc Herren <jlh@gmx.ch>.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mk/maint-parse-careful:
peel_onion: handle NULL
check return value from parse_commit() in various functions
parse_commit: don't fail, if object is NULL
revision.c: handle tag->tagged == NULL
reachable.c::process_tree/blob: check for NULL
process_tag: handle tag->tagged == NULL
check results of parse_commit in merge_bases
list-objects.c::process_tree/blob: check for NULL
reachable.c::add_one_tree: handle NULL from lookup_tree
mark_blob/tree_uninteresting: check for NULL
get_sha1_oneline: check return value of parse_object
read_object_with_reference: don't read beyond the buffer
