The "Discussion" section has a lot of useful information, but is a
little wordy, especially for an already-long man page, and is designed
for an audience more of potential git hackers than users, which probably
doesn't make as much sense as git matures. Also, I (perhaps foolishly)
forked a version in the user manual, which has been significantly
rewritten in an attempt to address some of the above problems.
So, remove this section and replace it by a (very terse) summary of the
original material--my attempt at the World's Shortest Git Overview--and
a reference to the appropriate chapter of the user manual. It's
unfortunate to remove something that's been in this place for a long
time, as some people may still depend on finding it there. But I think
we'll want to do this some day anyway.
Cc: Andreas Ericsson <ae@op5.se>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Actually I don't think we've previously mentioned .git/objects, so we
need a different introduction here.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Rewrite the introduction. Rewrite each section completely to make them
work in the new order, to add some examples, and to move plumbing
commands (like git-commit-tree) to the following chapter.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The bottom-up blog, tree, commit order makes sense unless you want to
give explicit examples--it's easier to discover objects to examine if
you go in the other order....,
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Add an example using git-ls-files, standardize on the new "index"
terminology (as opposed to "cache"), attempt to clarify discussion and
make it a little shorter, avoid some unnecessary jargon ("write-back
cache").
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The low-level index operations aren't as important to regular users as
the rest of this "git concepts" chapter; so move it into a separate
chapter, and do some minor cleanup.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
"git internals" sounds like something only git developers must know
about, but this stuff should be of wider interest. Rename the chapter
and give it a slightly friendlier introduction.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The descriptions of the various object types should all be a subsection
of the "Object Database" section.
I cribbed most of this chapter from the README (now core-intro.txt and
git(7)), because there's stuff in there people need to know and I was
too lazy to rewrite it. The audience isn't quite right, though--the
chapter is a mixture of user- and developer- level documentation that
isn't as appropriate now as it was originally.
So, reserve this chapter for stuff users need to know, and move the
source code introduction into a new "git hacking" chapter where we'll
also move any hacker-only technical details.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
* jc/partial-remove:
Document ls-files --with-tree=<tree-ish>
git-commit: partial commit of paths only removed from the index
git-commit: Allow partial commit of file removal.
* jc/grep-c:
Split grep arguments in a way that does not requires to add /dev/null.
Documentation/git-config.txt: AsciiDoc tweak to avoid leading dot
Add test to check recent fix to "git add -u"
Documentation/git-archive.txt: a couple of clarifications.
Fix the rename detection limit checking
diff --no-index: do not forget to run diff_setup_done()
Bram Schoenmakers noticed that git-config document was formatted
incorrectly. Depending on the version of AsciiDoc and docbook
toolchain, it is sometimes taken as a numbered example by AsciiDoc,
some other times passed intact to roff format to confuse "man".
Since we refer to the repository metadata directory as $GIT_DIR
elsewhere, work it around by using that symbolic name.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The description of the option gave impression that there
were several formats available by using three dots. There are
no other formats than tar and gzip currently supported.
Clarify that the archive goes to the standard output.
Signed-off-by: Jari Aalto <jari.aalto@cante.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
git-format-patch --in-reply-to: accept <message@id> with angle brackets
git-add -u: do not barf on type changes
Remove duplicate note about removing commits with git-filter-branch
git-clone: improve error message if curl program is missing or not executable
hooks--update: Explicitly check for all zeros for a deleted ref.
A duplicate of an already existing section in the documentation of
git-filter-branch was added in commit
f95eef15f2.
This patch removes that redundant section.
Signed-off-by: Ulrik Sverdrup <ulrik.sverdrup@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* rs/archive:
archive - leakfix for format_subst()
Define NO_MEMMEM on Darwin as it lacks the function
archive: rename attribute specfile to export-subst
archive: specfile syntax change: "$Format:%PLCHLDR$" instead of just "%PLCHLDR" (take 2)
add memmem()
Remove unused function convert_sha1_file()
archive: specfile support (--pretty=format: in archive files)
Export format_commit_message()
* sp/maint-no-thin:
Make --no-thin the default in git-push to save server resources
fix doc for --compression argument to pack-objects
git-tag -s must fail if gpg cannot sign the tag.
Remove obsolete details (core.legacyheaders is always true now).
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds a --threads=<n> parameter to 'git pack-objects' with
documentation.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pass --whitespace=<option> to git-apply. Since git-apply and git-am
expect this, I'm always surprised when I try to give it to git-rebase
and it doesn't work.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we're counting, a smaller number is 'fewer' not 'less'
Signed-off-by: Mike Ralphson <mike@abacus.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As suggested by Junio and Johannes, change the name of the former
attribute specfile to export-subst to indicate its function rather
than purpose and to make clear that it is not applied to working tree
files.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As suggested by Johannes, --pretty=format: placeholders in specfiles
need to be wrapped in $Format:...$ now. This syntax change restricts
the expansion of placeholders and makes it easier to use with files
that contain non-placeholder percent signs.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Include a git-push example for creating a remote branch
Cleanup unnecessary file modifications in t1400-update-ref
Makefile: Add cache-tree.h to the headers list
Don't allow contrib/workdir/git-new-workdir to trash existing dirs
git-apply: do not read past the end of buffer
Many users get confused when `git push origin master:foo` works
when foo already exists on the remote repository but are confused
when foo doesn't exist as a branch and this form does not create
the branch foo.
This new example highlights the trick of including refs/heads/
in front of the desired branch name to create a branch.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add support for a new attribute, specfile. Files marked as being
specfiles are expanded by git-archive when they are written to an
archive. It has no effect on worktree files. The same placeholders
as those for the option --pretty=format: of git-log et al. can be
used.
The attribute is useful for creating auto-updating specfiles. It is
limited by the underlying function format_commit_message(), though.
E.g. currently there is no placeholder for git-describe like output,
and expanded specfiles can't contain NUL bytes. That can be fixed
in format_commit_message() later and will then benefit users of
git-log, too.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using the "--mirror" option to "git remote add", the refs will not
be stored in the refs/remotes/ namespace, but in the same location as
on the remote side.
This option probably only makes sense in a bare repository.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allows username and password to be given using --smtp-user
and --smtp-pass. SSL use is flagged by --smtp-ssl. These are
backed by corresponding defaults in the git configuration file.
This implements Junio's 'mail identity' suggestion in a slightly
more generalised manner. --identity=$identity, backed by
sendemail.identity indicates that the configuration subsection
[sendemail "$identity"] should take priority over the [sendemail]
section for all configuration values.
Signed-off-by: Douglas Stockwell <doug@11011.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
HPA noticed that yum does not like the newer git RPM set; it turns out
that we do not ship git-p4 anymore but existing installations do not
realize the package is gone if we do not tell anything about it.
David Kastrup suggests using Obsoletes in the spec file of the new
RPM to replace the old package, so here is a try.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow port specification in ssh:// URLs in the
usual notation:
ssh://[user@]host.domain[:<port>]/<path>
This allows git to be used over ssh-tunneling
networks.
Signed-off-by: Luben Tuikov <ltuikov@yahoo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The warning message to suggest "Consider running git-status" from
"git-diff" that we experimented with during the 1.5.3 cycle turns
out to be a bad idea. It robbed cache-dirty information from people
who valued it, while still asking users to run "update-index --refresh".
It was hoped that the new behaviour would at least have some educational
value, but not showing the cache-dirty paths like before meant that the
user would not even know easily which paths were cache-dirty, and it
made the need to refresh the index look like even more unnecessary chore.
This commit reinstates the traditional behaviour, but with a twist.
By default, the empty "diff --git" output is totally squelched out
from "git diff" output. At the end of the command, it automatically
runs "update-index --refresh" as needed, without even bothering the
user. In other words, people who do not care about the cache-dirtyness
do not even have to see the warning.
The traditional behaviour to see the stat-dirty output and to bypassing
the overhead of content comparison can be specified by setting the
configuration variable diff.autorefreshindex to false.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With this function, a commit filter can leave out unwanted commits
(such as temporary commits). It does _not_ undo the changeset
corresponding to that commit, but it _skips_ the revision. IOW
no tree object is changed by this.
If you like to commit early and often, but want to filter out all
intermediate commits, marked by "@@@" in the commit message, you can
now do this with
git filter-branch --commit-filter '
if git cat-file commit $GIT_COMMIT | grep '@@@' > /dev/null;
then
skip_commit "$@";
else
git commit-tree "$@";
fi' newbranch
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the convenience functions to the top of git-filter-branch.sh, and
return from the script when the environment variable SOURCE_FUNCTIONS is
set.
By sourcing git-filter-branch with that variable set automatically, all
commit filters may access the convenience functions like "map".
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The interactive mode of rebase can be used to split commits. Tell the
interested parties about it, with a dedicated section in the man page.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some time ago, filter-branch's syntax changed so that more than one
ref can be rewritten at the same time. This involved the removal of
the ref name for the result; instead, the refs are rewritten in-place.
This updates the last leftovers in the documentation to reflect the
new behavior.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jari Aalto noticed a handful places in git-daemon documentation
that need to be improved.
* --inetd makes --pid-file to be ignored, in addition to --user
and --group
* receive-pack service was not described at all. We should, if
only to warn about the security implications of it.
* There was no example of per repository configuration.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As pointed out by Linus, these notations require the endpoints
given by the end user to be commits. Clarify.
Also, three-dots in AsciiDoc are turned into ellipses unless
quoted with bq. Be careful.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I think the trick with Git-side filename globbing is important and perhaps
not that well known. Clarify a bit in git-add documentation what it means.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We used to trigger the special case "things not in origin"
semantics only when one and only one positive ref is given, and
no number (e.g. "git format-patch -4 origin") was specified, and
used the general revision range semantics for everything else.
This narrows the special case a bit more, by making:
git format-patch --root this_version
to show everything that leads to the named commit.
More importantly, document the two different semantics better.
The generic revision range semantics came later and bolted on
without being clearly documented.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"GIT_DIR=some.where git --bare cmd" and worse yet
"git --git-dir=some.where --bare cmd" were very confusing. They
both ignored git-dir specified, and instead made $cwd as GIT_DIR.
This changes --bare not to override existing GIT_DIR.
This has been like this for a long time. Let's hope nobody sane
relied on this insane behaviour.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Options -d, -l, -v have already been explained in OPTIONS below.
Signed-off-by: Jari Aalto <jari.aalto@cante.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'master' of git://linux-nfs.org/~bfields/git:
Documentation/user-manual.txt: fix a few omissions of gitlink commands.
user-manual: fix incorrect header level
user-manual: use pithier example commit
user-manual: introduce the word "commit" earlier
user-manual: minor editing for conciseness
user-manual: edit "ignoring files" for conciseness
Documentation/user-manual.txt: fix a few omissions of gitlink commands.
Actually, we should have a competition for the favorite example commit.
Criteria:
- length: one-line changes with one-line comments preferred,
and no long lines
- significance/memorability
- comic value
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The immediate motivation for writing this section was to explain the
various places ignore patterns could be used. However, I still think
.gitignore is the case most people will want to learn about first. It
also makes it a bit more concrete to introduce ignore patterns in the
context of .gitignore first. And the existance of gitignore(5) relieves
the pressure to explain it all here.
So, stick to the .gitignore example, with only a brief mention of the
others, explain the syntax only by example, and leave the rest to
gitignore(5).
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Cc: Johan Herland <johan@herland.net>
The usage string for the executable was missing --refresh. In
addition, the documentation referred to "file", but the usage string
referred to "filepattern". Updated the documentation to
"filepattern", as git-add does handle patterns.
Signed-off-by: Brian Hetro <whee@smaertness.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When not referring to the cvs command, CVS makes more sense.
Signed-off-by: Brian Hetro <whee@smaertness.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --stdlayout option to git-svn init/clone initialises the default
Subversion values of trunk,tags,branches: -T trunk -b branches -t tags.
If any of the -T/-t/-b options are given in addition, they are given
preference.
[ew: fixed whitespace and added "-s" shortcut]
Signed-off-by: martin f. krafft <madduck@madduck.net>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
As noted by Mike Hommey, the documentation for the config setting tar.umask
is not up-to-date. Commit f08b3b0e2e changed
the default from 0 to 2; this patch finally documents it.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Hopefully last rc of 1.5.3 cycle, except a few documentation and
message wording changes, and git-gui 0.8.2.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-rev-parse manpage talks about the :$n:path notation (buried deep in
a list of other syntax) but it just says $n is a "stage number" -- someone
who is not familiar with the internals of git's merge implementation is
never going to be able to figure out that "1", "2", and "3" means.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --walk-reflogs logic and the --reverse logic are completely
incompatible with one another. Attempting to use both at the same
time leads to confusing results that sometimes violates the user's
formatting options or ignores the user's request to see the reflog
message and timestamp.
Unfortunately the implementation of both of these features is glued
onto the side of the revision walking machinary in such a way that
they are probably not going to be easy to make them compatible with
each other. Rather than offering the user confusing results we are
better off bailing out with an error message until such a time as
the implementations can be refactored to be compatible.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes it easier to find out how to enable the reflog
for a bare repository by searching the documentation for
"reflog".
Signed-off-by: Lukas Sandström <lukass@etek.chalmers.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To keep the change small, this is done by setting GIT_PAGER to "cat".
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Brian Gernhardt <benji@silverinsanity.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By default 'git reflog show' will show the reflog of 'HEAD' and not
the reflog of the current branch. This is most likely due to the
work done a while ago as part of the detached HEAD series to allow
HEAD to have its own reflog independent of each branch's reflog.
Since 'git reflog show' is really just an obscure alias for 'git
log -g --abbrev-commit --pretty=oneline' it should behave the same
way and its documentation should match.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The existing checkpoint command is very useful to force fast-import
to dump the branches out to disk so that standard Git tools can
access them and the objects they refer to. However there was not a
way to know when fast-import had finished executing the checkpoint
and it was safe to read those refs.
The progress command can be used to make fast-import output any
message of the frontend's choosing to standard out. The frontend
can scan for these messages using select() or poll() to monitor a
pipe connected to the standard output of fast-import.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
For the same reasons as the prior change we want to allow frontends
to omit the trailing LF that usually delimits commands. In some
cases these just make the input stream more verbose looking than
it needs to be, and its just simpler for the frontend developer to
get started if our parser is slightly more lenient about where an
LF is required and where it isn't.
To make this optional LF feature work we now have to buffer up to one
line of input in command_buf. This buffering can happen if we look
at the current input command but don't recognize it at this point
in the code. In such a case we need to "unget" the entire line,
but we cannot depend upon the stdio library to let us do ungetc()
for that many characters at once.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
A few fast-import frontend developers have found it odd that we
require the LF following a `data` command, especially in the exact
byte count format. Technically we don't need this LF to parse
the stream properly, but having it here does make the stream more
readable to humans. We can easily make the LF optional by peeking
at the next byte available from the stream and pushing it back into
the buffer if its not LF.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Several frontend developers have asked that some form of stream
comments be permitted within a fast-import data stream. This way
they can include information from their own frontend program about
where specific data was taken from in the source system, or about
a decision that their frontend may have made while creating the
fast-import data stream.
This change introduces comments in the Bourne-shell/Tcl/Perl style.
Lines starting with '#' are ignored, up to and including the LF.
Unlike the above mentioned three languages however we do not look for
and ignore leading whitespace. This just simplifies the definition
of the comment format and the code that parses them.
To make comments work we had to stop using read_next_command() within
cmd_data() and directly invoke read_line() during the inline variant
of the function. This is necessary to retain any lines of the
input data that might otherwise look like a comment to fast-import.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This new option allows an arbitrary "cmd" to generate per patch
file specific "Cc:"s.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As per http://marc.info/?l=git&m=118737219702802&w=2 , clarify
git-commit-tree documentation.
Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
- Remove "DESTBRANCH" from usage, as it rewrites the branches given.
- Remove an = from an example usage, as the script doesn't understand
it.
Signed-off-by: Brian Gernhardt <benji@silverinsanity.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply "Subproject commit HEX" changes produced by git-diff.
As usual in the current git, only the superproject itself is actually
modified (possibly creating empty directories for new submodules).
Any checked-out submodule is left untouched and is not required to
be up-to-date.
With clean-ups from Junio C Hamano.
Signed-off-by: Sven Verdoolaege <skimo@kotnet.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With this option git-log prints log message size
just before the corresponding message.
Porcelain tools could use this to speedup parsing
of git-log output.
Note that size refers to log message only. If also
patch content is shown its size is not included.
In case it is not possible to know the size upfront
size value is set to zero.
Signed-off-by: Marco Costalba <mcostalba@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows to refresh only a subset of the project files, based on
the specified pathspecs.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If cmd-list.made has been created by a previous run as root, output
redirection to it will fail. So remove it before regeneration.
Signed-off-by: David Kastrup <dak@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cr/tag:
Teach "git stripspace" the --strip-comments option
Make verify-tag a builtin.
builtin-tag.c: Fix two memory leaks and minor notation changes.
launch_editor(): Heed GIT_EDITOR and core.editor settings
Make git tag a builtin.
These patches use docbook2x in order to create an info version of the
git user manual. No existing Makefile targets (including "all") are
touched, so you need to explicitly say
make info
sudo make install-info
to get git.info created and installed. If the info target directory
does not already contain a "dir" file, no directory entry is created.
This facilitates $(DESTDIR)-based installations. The same could be
achieved with
sudo make INSTALL_INFO=: install-info
explicitly.
perl is used for patching up sub-par file and directory information in
the Texinfo file. It would be cleaner to place the respective info
straight into user-manual.txt or the conversion configurations, but I
find myself unable to find out how to do this with Asciidoc/Texinfo.
Signed-off-by: David Kastrup <dak@gnu.org>
This attempts to force fixed-font in manpages for literal
blocks. I have tested this with docbook 1.71 and it seems to
work as expected.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This hides the backslash at the end of line from AsciiDoc
toolchain by introducing a trailing whitespace on one line in an
illustration in git-rev-parse.txt.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The basic idea was proposed by Steve Hoelzer; in order to make
the list easier to search, we keep the command list in the
script that generates it with "sort -d".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The basic idea is from Mark Levedahl. I do not use GZ=1 nor
quick-install-doc myself (there obviously is a chicken-and-egg
issue with quick-install-doc for me).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These instructions tell you how to create a clone of a repository
created with git-svn, that can in turn be used with git-svn.
Signed-off-by: Adam Roben <aroben@apple.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As with git-add, I think previous updates to the git-commit man page did
indeed help make it more user-friendly. But I think the banishment of
the word "index" from the description goes too far; reinstate its use,
to simplify some of the language slightly and smooth the transition to
other documentation.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'master' of git://linux-nfs.org/~bfields/git:
documentation: use the word "index" in the git-add manual page
user-manual: mention git-gui
user-manual: mention git stash
user-manual: update for new default --track behavior
It was a neat trick to show that you could introduce the git-add manual
page without using the word "index", and it was certainly an improvement
over the previous man page (which started out "A simple wrapper for
git-update-index to add files to the index...").
But it's possible to use the standard terminology without sacrificing
user-friendliness. So, rewrite to use the word "index" when
appropriate.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The git gui project seems to be still in early stages, but at a point
where it's worth mentioning as an alternative way of creating commits.
One feature of interest is the ability to manipulate individual diff
hunks. However, people have found that feature not to be easily
discoverable from the user-interface. Pending some ui improvements, a
parenthetical hint here may help.
(Thanks to Steffen Prohask and Junio Hamano for suggesting the
language.)
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Update documentation to reflect the --track default.
That change seems to have happened in the 1.5.3 -rc's, so bump the "for
version x.y.z or newer" warning as well.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The script starts in a subdirectory of the source directory to
muck with a branch whose structure does not have anything to
do with the actual work tree. Go up to the top to make it clear
that we operate on the whole tree.
It also exported GIT_DIR without any good reason. Remove it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In git-push it is the remote repository and not the
local repository which is fast forwarded. The description
of the -f option in the git-push manpage gets it the other
way round.
Signed-off-by: Jyotirmoy Bhattacharya <jyotirmoy@jyotirmoy.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The GIT_SSH environment variable has survived for quite a while
without being documented, but has been mentioned on list and on
my day-job repositories can only be accessed via magic supplied
through the wonderous hack that is GIT_SSH.
Advertising it alongside other "low level magic" such as GIT_PAGER
and GIT_MERGE_VERBOSITY will certainly help others who need to
spread their own pixie dust to make things work.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current implementation of core.gitproxy only operates on
git:// URLs, so the ssh:// examples and custom protocol examples
have been removed or edited.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This changes the behaviour of cloning from a repository on the
local machine, by defaulting to "-l" (use hardlinks to share
files under .git/objects) and making "-l" a no-op. A new
option, --no-hardlinks, is also added to cause file-level copy
of files under .git/objects while still avoiding the normal
"pack to pipe, then receive and index pack" network transfer
overhead. The old behaviour of local cloning without -l nor -s
is availble by specifying the source repository with the newly
introduced file:///path/to/repo.git/ syntax (i.e. "same as
network" cloning).
* With --no-hardlinks (i.e. have all .git/objects/ copied via
cpio) would not catch the source repository corruption, and
also risks corrupted recipient repository if an
alpha-particle hits memory cell while indexing and resolving
deltas. As long as the recipient is created uncorrupted, you
have a good back-up.
* same-as-network is expensive, but it would catch the breakage
of the source repository. It still risks corrupted recipient
repository due to hardware failure. As long as the recipient
is created uncorrupted, you have a good back-up.
* The new default on the same filesystem, as long as the source
repository is healthy, it is very likely that the recipient
would be, too. Also it is very cheap. You do not get any
back-up benefit, though.
None of the method is resilient against the source repository
corruption, so let's discount that from the comparison. Then
the difference with and without --no-hardlinks matters primarily
if you value the back-up benefit or not. If you want to use the
cloned repository as a back-up, then it is cheaper to do a clone
with --no-hardlinks and two git-fsck (source before clone,
recipient after clone) than same-as-network clone, especially as
you are likely to do a git-fsck on the recipient if you are so
paranoid anyway.
Which leads me to believe that being able to use file:/// is
probably a good idea, if only for testability, but probably of
little practical value. We default to hardlinked clone for
everyday use, and paranoids can use --no-hardlinks as a way to
make a back-up.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes "make doc" work even if you made "sudo make doc" previously
by mistake. Apparently an oversight: the other targets did this already.
Signed-off-by: David Kastrup <dak@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I switched git.kernel.dk to --base-path a few minutes ago, to get rid of
a /data/git postfix in the posted urls. But transitioning is tricky,
since now all old paths will fail miserably.
So I added this --base-path-relaxed option, that will make git-daemon
try the absolute path without prefixing --base-path before giving up.
With this in place and --base-path-relaxed added, both my new url of
git://git.kernel.dk/linux-2.6-block.git
and the old
git://git.kernel.dk/data/git/linux-2.6-block.git
work fine.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are (really!) systems where using environment variables is very
cumbersome (yes, Windows, it has problems unsetting them). Besides this
form is shorter.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The file used for per-repository attribute setting is not
$GIT_DIR/info/gitattributes, but $GIT_DIR/info/attributes.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Calling 'git-diff --name-status' will recursively show any
changes already, and it has for quite some time (at least as
far back as v1.4.1).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With --strip-comments (or short -s), git stripspace now removes lines
beginning with a '#', too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This replaces "git-verify-tag.sh" with "builtin-verify-tag.c".
Testing relies on the "git tag -v" tests calling this command.
A temporary file is needed when calling to gpg, because git is
already creating detached signatures (gpg option -b) to sign tags
(instead of leaving gpg to add the signature to the file by itself),
and those signatures need to be supplied in a separate file to be
verified by gpg.
The program uses git_mkstemp to create that temporary file needed by
gpg, instead of the previously used "$GIT_DIR/.tmp-vtag", in order to
allow the command to be used in read-only repositories, and also
prevent other instances of git to read or remove the same file.
Signal SIGPIPE is ignored because the program sometimes was
terminated because that signal when writing the input for gpg.
The command now can receive many tag names to be verified.
Documentation is also updated here to reflect this new behaviour.
Signed-off-by: Carlos Rica <jasampler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add it to the list in config.txt and explicitly say that the
--template option to git-commit overrides the configuration variable.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The NUL you see in "git log" (without diff) output are between records,
not at the end of each record.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These are useful in organizations that enforce particular formats
for commit messages, e.g., to specify bug IDs or test plans.
Use of the template is not enforced; it is simply used as the
initial content when the editor is invoked.
Signed-off-by: Steven Grimm <koreth@midwinter.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There have been several complaints against k.org's user-manual
page. The document is generated in ISO-8859-1 by the xsltproc
toolchain (I suspect this is because released docbook.xsl we use
has xsl:output element that says the output is ISO-8859-1) but
server delivers it with "charset=UTF-8", and all h*ll breaks
loose.
This attempts to force UTF-8 on the generating end.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The flag "no_walk" is present in struct rev_info since a long time, but
so far has been in use exclusively by "git show".
With this flag, you can see all your refs, ordered by date of the last
commit:
$ git log --abbrev-commit --pretty=oneline --decorate --all --no-walk
which is extremely helpful if you have to juggle with a lot topic
branches, and do not remember in which one you introduced that uber
debug option, or simply want to get an overview what is cooking.
(Note that the "git log" invocation above does not output the same as
$ git show --abbrev-commit --pretty=oneline --decorate --all --quiet
since "git show" keeps the alphabetic order that "--all" returns the
refs in, even if the option "--date-order" was passed.)
For good measure, this also adds the "--do-walk" option which overrides
"--no-walk".
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We used to take the first non-option argument as the name for the new
branch. This syntax is not extensible to support rewriting more than just
HEAD.
Instead, we now have the following syntax:
git filter-branch [<filter options>...] [<rev-list options>]
All positive refs given in <rev-list options> are rewritten. Yes,
in-place. If a ref was changed, the original head is stored in
refs/original/$ref now, for your inspecting pleasure, in addition to the
reflogs (since it is easier to inspect "git show-ref | grep original" than
to inspect all the reflogs).
This commit also adds the --force option to remove .git-rewrite/ and all
refs from refs/original/ before filtering.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When looking for a lost blob, it is much nicer to be able to grep
through .git/lost-found/other/* than to write an inefficient loop
over the file names. So write the contents of the dangling blobs,
not their object names.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These options to log family were too long to type. Give them
shorter synonyms.
Fix the parsing of the long options while at it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This replaces the script "git-tag.sh" with "builtin-tag.c".
The existing test suite for "git tag" guarantees the compatibility
with the features provided by the script version.
There are some minor changes in the behaviour of "git tag" here:
"git tag -v" now can get more than one tag to verify, like "git tag -d" does,
"git tag" with no arguments prints all tags, more like "git branch" does,
and "git tag -n" also prints all tags with annotations (without needing -l).
Tests and documentation were also updated to reflect these changes.
The program is currently calling the script "git verify-tag" for verify.
This can be changed porting it to C and calling its functions directly
from builtin-tag.c.
Signed-off-by: Carlos Rica <jasampler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These variables let you specify an editor that will be launched in
preference to the EDITOR and VISUAL environment variables. The order
of preference is GIT_EDITOR, core.editor, EDITOR, VISUAL.
[jc: added a test and config variable documentation]
Signed-off-by: Adam Roben <aroben@apple.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command was recently updated to take message on the command line, but
this feature has not been documented.
Signed-off-by: Nanako Shiraishi <nanako3@bluebottle.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For the html output we can use a stylesheet to make sure that the
listingblocks are presented in a monospaced font. For the manpages do
it manually by inserting a ".ft C" before and ".ft" after the block in
question.
In order for these roff commands to get through to the manpage they
have to be element encoded to prevent quoting.
Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move git-p4import.py and Documentation/git-p4import.txt into
a contrib/p4import directory. Add a README there directing
people to contrib/fast-import/git-p4 as a better alternative.
Signed-off-by: Sean Estabrooks <seanlkml@sympatico.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'master' of git://repo.or.cz/git/fastimport:
Teach fast-import to recursively copy files/directories
Fix git-p4 on Windows to not use the Posix sysconf function.
Correct trivial typo in fast-import documentation
Some source material (e.g. Subversion dump files) perform directory
renames by telling us the directory was copied, then deleted in the
same revision. This makes it difficult for a frontend to convert
such data formats to a fast-import stream, as all the frontend has
on hand is "Copy a/ to b/; Delete a/" with no details about what
files are in a/, unless the frontend also kept track of all files.
The new 'C' subcommand within a commit allows the frontend to make a
recursive copy of one path to another path within the branch, without
needing to keep track of the individual file paths. The metadata
copy is performed in memory efficiently, but is implemented as a
copy-immediately operation, rather than copy-on-write.
With this new 'C' subcommand frontends could obviously implement an
'R' (rename) on their own as a combination of 'C' and 'D' (delete),
but since we have already offered up 'R' in the past and it is a
trivial thing to keep implemented I'm not going to deprecate it.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
In the previous behavior, "git-rm --cached" (without -f) had the same
restriction as "git-rm". This forced the user to use the -f flag in
situations which weren't actually dangerous, like:
$ git add foo # oops, I didn't want this
$ git rm --cached foo # back to initial situation
Previously, the index had to match the file *and* the HEAD. With
--cached, the index must now match the file *or* the HEAD. The behavior
without --cached is unchanged, but provides better error messages.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now, git-log family can take full range of internally supported date format
to their --date=<format> argument. Document it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Support output of full ISO 8601 style dates in e.g. git log
and other places that use interpolation for formatting.
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation based on description of commit 443f8338 which added
'-u'|'--untracked-files' option to git-status, and on git-runstatus(1)
man page.
Note that those options apply also to git-status.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document that '--message=<msg>' is long version of '-m <msg>' in
git-commit, and that '--no-checkout' is long version of '-n' in
git-clone.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add "Configuration" section to describe merge.summary
configuration variable (which is mentioned in git-fmt-merge-msg(1)
man page, but it is a plumbing command), and merge.verbosity
configuration variable (so there is a place to make reference
from "Environment Variables" section of git(7) man page) to the
git-merge(1) man page. Also describe GIT_MERGE_VERBOSITY
environment.
The configuration variable merge.verbosity and environment variable
GIT_MERGE_VERBOSITY were introduced in commit 8c3275ab, which also
documented configuration variable but not environment variable.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After vainly searching the Documentation for how to follow renames, I
finally broke down and grepped the source. It would appear that Linus
didn't add write and docs for this feature when he wrote it. The
following patch rectifies that, hopefully sparing future users from
resorting to the source code.
Signed-off-by: Steven Walter <stevenrwalter@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
GIT 1.5.2.4
Teach read-tree 2-way merge to ignore intermediate symlinks
git-gui: Work around bad interaction between Tcl and cmd.exe on ^{tree}
git-gui: Don't linewrap within console windows
git-gui: Correct ls-tree buffering problem in browser
git-gui: Skip nicknames when selecting author initials
git-gui: Ensure windows shortcuts always have .bat extension
git-gui: Include a Push action on the left toolbar
git-gui: Bind M1-P to push action
git-gui: Don't bind F5/M1-R in all windows
git-gui: Unlock the index when cancelling merge dialog
git-gui: properly popup error if gitk should be started but is not installed
This patch cleans up some complicated code, and replaces it with a
cleaner version, using code from remote.[ch], which got extended a
little in the process. This also enables us to fix two cases:
The earlier "fix" to setup tracking only when the original ref started
with "refs/remotes" is wrong. You are absolutely allowed to use a
separate layout for your tracking branches. The correct fix, of course,
is to set up tracking information only when there is a matching
remote.<nick>.fetch line containing a colon.
Another corner case was not handled properly. If two remotes write to
the original ref, just warn the user and do not set up tracking.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some source material (e.g. Subversion dump files) perform directory
renames without telling us exactly which files in that subdirectory
were moved. This makes it hard for a frontend to convert such data
formats to a fast-import stream, as all the frontend has on hand
is "Rename a/ to b/" with no details about what files are in a/,
unless the frontend also kept track of all files.
The new 'R' subcommand within a commit allows the frontend to
rename either a file or an entire subdirectory, without needing to
know the object's SHA-1 or the specific files contained within it.
The rename is performed as efficiently as possible internally,
making it cheaper than a 'D'/'M' pair for a file rename.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The 'D' subcommand within a commit can also delete a directory
recursively. This wasn't clear in the prior version of the
documentation, leading to a question on the mailing list.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Since the external interface seems to have stabilized for this
new feature, let's document it properly.
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
user-manual: fix directory name in git-archive example
user-manual: more explanation of push and pull usage
tutorial: Fix typo
user-manual: grammar and style fixes
Junio noticed that switching on autosetupmerge unilaterally started
cluttering the config for local branches. That is not the original
intention of branch.autosetupmerge, which was meant purely for
convenience when branching off of remote branches, but that semantics
got lost somewhere.
If you still want that "new" behavior, you can switch
branch.autosetupmerge to the value "all". Otherwise, it is interpreted
as a boolean, which triggers setting up defaults _only_ when branching
off of a remote branch, i.e. the originally intended behavior.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recently a user on the mailing list complained that they'd read the
manual but couldn't figure out how to keep a couple private repositories
in sync. They'd tried using push, and were surprised by the effect.
Add a little text in an attempt to make it clear that:
- Pushing to a branch that is checked out will have odd results.
- It's OK to synchronize just using pull if that's simpler.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
- "method of" is vulgar, "method for" is nicer
- "recovery" becomes "recovering" from Steve Hoelzer's original version
of this patch
- "if you want" is nicer as "if you wish"
- "you may" should be "you can"; "you may" is "you have permission to"
rather than "you can"'s "it is possible to"
Signed-off-by: Andy Parkins <andyparkins@gmail.com>
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
When git-submodule was updated to allow mapping between submodule name and
submodule path, the documentation was left untouched.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier, "git rerere" was enabled by creating the directory
.git/rr-cache. That is definitely not in line with most other
features, which are enabled by a config variable.
So, check the config variable "rerere.enabled". If it is set
to "false" explicitely, do not activate rerere, even if
.git/rr-cache exists. This should help when you want to disable
rerere temporarily.
If "rerere.enabled" is not set at all, fall back to detection
of the directory .git/rr-cache.
[jc: with minimum tweaks]
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The SYNOPSIS section of git-submodule.txt contains two forms. Since
it doesn't use the verse style, the line boundary between them is not
preserved and the second form can appear on the same line as the first
form. Adding [verse] enables the verse style, which preserves the
line boundary between them.
Signed-off-by: Matt Kraai <kraai@ftbfs.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This one fixes a small formulation weirdness in
Documentation/user-manual.txt
Signed-off-by: Marcus Fritzsch <m@fritschy.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Bob cloned from Alice.
The origin url is actually Alice's repo.
Signed-off-by: Alecs King <alecsk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All filters, except the commit filter, are evaluated.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since git-clone is one of the many commands taking
URLs to remote repositories as an argument, it should include
the URL-types list from urls.txt.
Split up urls.txt into urls.txt and urls-remotes.txt. The latter
should be used by anything besides git-clone where a discussion of
using .git/config and .git/remotes/ to name URLs just doesn't make
as much sense.
Signed-off-by: Andrew Ruder <andy@aeruder.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
- The map function used to fail, but no longer does (since 3520e1e8687.)
- Fix the "edge-graft" example.
- Show the same using .git/info/grafts.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All based on comments from Frank Lichtenheld.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Acked-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds a configuration variable that performs the same function as,
but is overridden by, GIT_PAGER.
Signed-off-by: Brian Gernhardt <benji@silverinsanity.com>
Acked-by: Johannes E. Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Document -<n> for git-format-patch
glossary: add 'reflog'
diff --no-index: fix --name-status with added files
Don't smash stack when $GIT_ALTERNATE_OBJECT_DIRECTORIES is too long
To prevent funky games with external diff engines, git-log and
friends prevent external diff engines from being called. That makes
sense in the context of git-format-patch or git-rebase.
However, for "git log -p" it is not so nice to get the message
that binary files cannot be compared, while "git diff" has no
problems with them, if you provided an external diff driver.
With this patch, "git log --ext-diff -p" will do what you expect,
and the option "--no-ext-diff" can be used to override that
setting.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This moves the documentation in git-filter-branch.sh to its own
man page, with a few touch ups (incorporating comments by Frank
Lichtenheld).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The -<n> option was not mentioned in git-format-patch's manpage till
now. Fix this.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With this option, dangling objects are not only reported, but also
written to .git/lost-found/commit/ or .git/lost-found/other/. This
option implies '--full' and '--no-reflogs'.
'git fsck --lost-found' is meant as a replacement for git-lost-found.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This change lets you use the format.subjectprefix config option to override the
default subject prefix.
Signed-off-by: Adam Roben <aroben@apple.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ns/stash:
Documentation: quote {non-attributes} for asciidoc
git-stash: don't complain when listing in a repo with no stash
git-stash: fix "can't shift that many" with no arguments
git-stash: fix "no arguments" case in documentation
git-stash: require "save" to be explicit and update documentation
Document git-stash
Add git-stash script
* js/rebase:
Teach rebase -i about --preserve-merges
rebase -i: provide reasonable reflog for the rebased branch
rebase -i: several cleanups
ignore git-rebase--interactive
Teach rebase an interactive mode
Move the pick_author code to git-sh-setup
Change "to made" to "made to", which is a typo. Use "reflog"
instead of "ref log", which is used elsewhere throughout the
documentation.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Asciidoc treats {foo} as an attribute to be substituted; if
'foo' doesn't exist as an attribute, then the entire line
gets dropped. When the literal {foo} is desired, \{foo} is
required.
The exceptions to this rule are:
- inside literal blocks
- if the 'foo' contains non-alphanumeric characters (e.g.,
{foo|bar} is assumed not to be an attribute)
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To make a submodule effectively usable, the path and
a URL where the submodule can be cloned need to be stored
in .gitmodules. This subcommand takes care of setting
this information after cloning the new submodule.
Only the index is updated, so, if needed, the user may still
change the URL or switch to a different branch of the submodule
before committing.
Signed-off-by: Sven Verdoolaege <skimo@kotnet.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Asciidoc treats {foo} as an attribute to be substituted; if
'foo' doesn't exist as an attribute, then the entire line
gets dropped. When the literal {foo} is desired, \{foo} is
required.
The exceptions to this rule are:
- inside literal blocks
- if the 'foo' contains non-alphanumeric characters (e.g.,
{foo|bar} is assumed not to be an attribute)
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 9488e875 changed this from 'save' to 'list', but
missed this spot in the documentation.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ei/worktree+filter:
filter-branch: always export GIT_DIR if it is set
setup_git_directory: fix segfault if repository is found in cwd
test GIT_WORK_TREE
extend rev-parse test for --is-inside-work-tree
Use new semantics of is_bare/inside_git_dir/inside_work_tree
introduce GIT_WORK_TREE to specify the work tree
test git rev-parse
rev-parse: introduce --is-bare-repository
rev-parse: document --is-inside-git-dir
This describes the git-stash command.
I borrowed a few paragraphs from Johannes's version, and added a few
examples.
Signed-off-by: Nanako Shiraishi <nanako3@bluebottle.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch arose from a discussion started by Jim Meyering's patch
whose intention was to provide better diagnostics for failed writes.
Linus proposed a better way to do things, which also had the added
benefit that adding a fflush() to git-log-* operations and incremental
git-blame operations could improve interactive respose time feel, at
the cost of making things a bit slower when we aren't piping the
output to a downstream program.
This patch skips the fflush() calls when stdout is a regular file, or
if the environment variable GIT_FLUSH is set to "0". This latter can
speed up a command such as:
GIT_FLUSH=0 strace -c -f -e write time git-rev-list HEAD | wc -l
a tiny amount.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'show' and 'prune' commands accept an option '-n'; document what
it does.
Signed-off-by: Sam Vilain <sam.vilain@catalyst.net.nz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some minor enhancements to the git-repack manual page.
Signed-off-by: Sam Vilain <sam.vilain@catalyst.net.nz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-init lacks an option to suppress non-error and non-warning output -
this patch adds one.
Signed-off-by: Jeffrey C. Ollie <jeff@ocjtech.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This change makes git-send-email's behavior easier to modify by adding config
equivalents for two more of git-send-email's flags.
The mapping of flag to config setting is:
--[no-]supress-from => sendemail.suppressfrom
--[no-]signed-off-cc => sendemail.signedoffcc
It renames the --threaded option to --thread/--no-thread; the
config variable is also called sendemail.thread.
Signed-off-by: Adam Roben <aroben@apple.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --threaded option controls whether the In-Reply-To header will be set on
any emails sent. The current behavior is to always set this header, so this
option is most useful in its negated form, --no-threaded. This behavior can
also be controlled through the 'sendemail.threaded' config setting.
Signed-off-by: Adam Roben <aroben@apple.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use \n as delimiter between key and value and \0 as
delimiter after each key/value pair. This should be
easily parsable output.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The option "-p" (or long "--preserve-merges") makes it possible to
rebase side branches including merges, without straightening the
history.
Example:
X
\
A---M---B
/
---o---O---P---Q
When the current HEAD is "B", "git rebase -i -p --onto Q O" will yield
X
\
---o---O---P---Q---A'---M'---B'
Note that this will
- _not_ touch X [*1*], it does
- _not_ work without the --interactive flag [*2*], it does
- _not_ guess the type of the merge, but blindly uses recursive or
whatever strategy you provided with "-s <strategy>" for all merges it
has to redo, and it does
- _not_ make use of the original merge commit via git-rerere.
*1*: only commits which reach a merge base between <upstream> and HEAD
are reapplied. The others are kept as-are.
*2*: git-rebase without --interactive is inherently patch based (at
least at the moment), and therefore merges cannot be preserved.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The asciidoc documentation of the --get-regexp option was
incomplete. Add some missing pieces:
- List the option in SYNOPSIS
- Mention that key names are printed
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rounding down the printed (dis)similarity index allows us to use
"100%" as a special value that indicates complete rewrites and
fully equal file contents, respectively.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't you just hate the fact sometimes, that git-rebase just applies
the patches, without any possibility to edit them, or rearrange them?
With "--interactive", git-rebase now lets you edit the list of patches,
so that you can reorder, edit and delete patches.
Such a list will typically look like this:
pick deadbee The oneline of this commit
pick fa1afe1 The oneline of the next commit
...
By replacing the command "pick" with the command "edit", you can amend
that patch and/or its commit message, and by replacing it with "squash"
you can tell rebase to fold that patch into the patch before that.
It is derived from the script sent to the list in
<Pine.LNX.4.63.0702252156190.22628@wbgn013.biozentrum.uni-wuerzburg.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We always quote "unusual" byte values in a pathname using
C-string style, to make it safer for parsing scripts that do not
handle NUL separated records well (or just too lazy to bother).
The absolute minimum bytes that need to be quoted for this
purpose are TAB, LF (and other control characters), double quote
and backslash.
However, we have also always quoted the bytes in high 8-bit
range; this was partly because we were lazy and partly because
we were being cautious.
This introduces an internal "quote_path_fully" variable, and
core.quotepath configuration variable to control it. When set
to false, it does not quote bytes in high 8-bit range anymore
but passes them intact.
The variable defaults to "true" to retain the traditional
behaviour for now.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make clear in the documentation that when using --branches/-b and
--prefix with 'init', the prefix must include a trailing slash.
This matches the actual behavior of git-svn, e.g.:
$ git svn init -Ttrunk -treleases -bbranches --prefix xxx \
http://svn.sacredchao.net/svn/quodlibet/
--prefix='xxx' must have a trailing slash '/'
$
This was noticed by R. Vanicat and reported through
http://bugs.debian.org/429443
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jakub Narebski pointed out that the git-gui blame viewer is not a
widely known feature, but is incredibly useful. Part of the issue
is advertising. Up until now we haven't even referenced git-gui from
within the core Git manual pages, mostly because I just wasn't sure
how I wanted to supply git-gui documentation to end-users, or how
that documentation should integrate with the core Git documentation.
Based upon Jakub's comment that many users may not even know that
the gui is available in a stock Git distribution I'm offering up
two basic manual pages: git-citool and git-gui. These should offer
enough of a starting point for users to identify that the gui exists,
and how to start it. Future releases of git-gui may contain their
own documentation system available from within a running git-gui.
But not today.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Based on description of commit 477f2b4131
"git log --full-diff" adding this option.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation taken from paraphrased description of "--abbrev[=<n>]"
diff option, and from description of commit 5c51c985 introducing
this option.
Note that to change number of digits one must use "--abbrev=<n>",
which affects [also] diff output.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Note that git log does not understand this option yet:
$ git log --timestamp
fatal: unrecognized argument: --timestamp
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document --stale-fix, used in "git reflog expire --stale-fix --all"
to remove invalid reflog entries, to fix situation after running
non reflog-aware git-prune from an older git in the presence of
reflogs (see RelNotes-1.5.0.txt).
Based on description of commit 1389d9ddaa
"reflog expire --fix-stale"
which introduced this option.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/remote:
git-push: Update description of refspecs and add examples
remote.c: "git-push frotz" should update what matches at the source.
remote.c: fix "git push" weak match disambiguation
remote.c: minor clean-up of match_explicit()
remote.c: refactor creation of new dst ref
remote.c: refactor match_explicit_refs()
* fl/cvsserver:
cvsserver: Actually implement --export-all
cvsserver: Let --base-path and pserver get along just fine
cvsserver: Add some useful commandline options
* lh/submodule:
gitmodules(5): remove leading period from synopsis
Add gitmodules(5)
git-submodule: give submodules proper names
Rename sections from "module" to "submodule" in .gitmodules
git-submodule: remember to checkout after clone
t7400: barf if git-submodule removes or replaces a file
It turns out that the attribute definition we have had for a
long time to hide "^" character from AsciiDoc 7 was not honored
by AsciiDoc 8 even under "-a asciidoc7compatible" mode. There is
a similar breakage with the "compatible" mode with + characters.
The double colon at the end of definition list term needs
to be attached to the term, without a whitespace. After this
minimum fixups, AsciiDoc 8 (I used 8.2.1 on Debian) with
compatibility mode seems to produce reasonably good results.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Asciidoc treats a line starting with a period followed by a title as a
blocktitle element. My introduction of gitmodules(5) unfortunatly broke
the documentation build process due to this processing, since it made
asciidoc generate an illegal (empty) synopsis element. Removing the leading
period fixes the problem and also makes gitmodules(5) use the same synopsis
notation as gitattributes(5).
Noticed-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Embarrassing bug number two in my options patch.
Also enforce that --export-all is only ever used together with an
explicit whitelist. Otherwise people might export every git repository
on the whole system without realising.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* aw/cvs:
cvsimport: add <remote>/HEAD reference in separate remotes more
cvsimport: update documentation to include separate remotes option
cvsimport: add support for new style remote layout
Earlier, a second "-C" on the command line had no effect.
But "--find-copies-harder" is so long to type, let's make doubled -C
enable that option. It is in line with how "git blame" handles such
doubled options to mean "work harder".
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
tutorial: use "project history" instead of "changelog" in header
Documentation: user-manual todo
user-manual: add a missing section ID
Fix typo in remote branch example in git user manual
user-manual: quick-start updates
The word "changelog" seems a little too much like jargon to me, and beginners
must understand section headers so they know where to look for help.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
In Documentation/user-manual.txt the example
$ git checkout --track -b origin/maint maint
under "Getting updates with git pull", should read
$ git checkout --track -b maint origin/maint
This was noticed by Ron, and reported through
http://bugs.debian.org/427502
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Update text to reflect new position in appendix.
Update the name to reflect the fact that this is closer to reference
than tutorial documentation (as suggested by Jonas Fonseca).
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
When refactoring code to split one iteration of a too deeply
nested loop into a separate function, it inevitably makes the
indentation levels shallower (that's the sole point of such a
refactoring). With "git blame -w", you can ignore such
re-indentation and pass blame for such moved lines to the
parent.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In several of the text messages, the tense of the verb is inconsistent.
For example, "Add" vs "Creates". It is customary to use imperative for
command description.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make git-cvsserver understand some options inspired by
git-daemon, namely --base-path, --export-all, --strict-paths.
Also allow the caller to specify a whitelist of allowed
directories, again similar to git-daemon.
While already adding option parsing also support the common
--help and --version options.
Rationale:
While the gitcvs.enabled configuration option already
offers means to limit git-cvsserver access to a repository,
there are some use cases where other methods of access
control prove to be more useful.
E.g. if setting up a pserver for a collection of public
repositories one might want limit the exported repositories
to exactly the directory this collection is located whithout
having to worry about other repositories that might lie around
with the configuration variable set (never trust your users ;)
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This uses "git-apply --whitespace=strip" to fix whitespace errors that have
crept in to our source files over time. There are a few files that need
to have trailing whitespaces (most notably, test vectors). The results
still passes the test, and build result in Documentation/ area is unchanged.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
setup_gdg is used as abbreviation for setup_git_directory_gently.
The work tree can be specified using the environment variable
GIT_WORK_TREE and the config option core.worktree (the environment
variable has precendence over the config option). Additionally
there is a command line option --work-tree which sets the
environment variable.
setup_gdg does the following now:
GIT_DIR unspecified
repository in .git directory
parent directory of the .git directory is used as work tree,
GIT_WORK_TREE is ignored
GIT_DIR unspecified
repository in cwd
GIT_DIR is set to cwd
see the cases with GIT_DIR specified what happens next and
also see the note below
GIT_DIR specified
GIT_WORK_TREE/core.worktree unspecified
cwd is used as work tree
GIT_DIR specified
GIT_WORK_TREE/core.worktree specified
the specified work tree is used
Note on the case where GIT_DIR is unspecified and repository is in cwd:
GIT_WORK_TREE is used but is_inside_git_dir is always true.
I did it this way because setup_gdg might be called multiple
times (e.g. when doing alias expansion) and in successive calls
setup_gdg should do the same thing every time.
Meaning of is_bare/is_inside_work_tree/is_inside_git_dir:
(1) is_bare_repository
A repository is bare if core.bare is true or core.bare is
unspecified and the name suggests it is bare (directory not
named .git). The bare option disables a few protective
checks which are useful with a working tree. Currently
this changes if a repository is bare:
updates of HEAD are allowed
git gc packs the refs
the reflog is disabled by default
(2) is_inside_work_tree
True if the cwd is inside the associated working tree (if there
is one), false otherwise.
(3) is_inside_git_dir
True if the cwd is inside the git directory, false otherwise.
Before this patch is_inside_git_dir was always true for bare
repositories.
When setup_gdg finds a repository git_config(git_default_config) is
always called. This ensure that is_bare_repository makes use of
core.bare and does not guess even though core.bare is specified.
inside_work_tree and inside_git_dir are set if setup_gdg finds a
repository. The is_inside_work_tree and is_inside_git_dir functions
will die if they are called before a successful call to setup_gdg.
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sv/objfixes:
Don't assume tree entries that are not dirs are blobs
git-cvsimport: Make sure to use $git_dir always instead of .git sometimes
fix documentation of unpack-objects -n
Accept dates before 2000/01/01 when specified as seconds since the epoch
unpack-objects -n didn't print the object list as promised on the
manual page, so alter the documentation to reflect the behaviour
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This teaches 'git-submodule init' to register submodule paths and urls in
.git/config instead of actually cloning them. The cloning is now handled
as part of 'git-submodule update'.
With this change it is possible to specify preferred/alternate urls for
the submodules in .git/config before the submodules are cloned.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document the cvsimport -r <remote> option which switches cvsimport
to using a separate remote for tracking branches.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With this option, git-format-patch will generate simple
numbered files as output instead of the default using
with the first commit line appended.
This simplifies the ability to generate an MH-style
drafts folder with each message to be sent.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With --verbose, it gets really chatty now.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The <pattern> for -l is now a shell pattern, not a list of grep parameters.
Option -l may be repeated with another <pattern>.
The new -n [<num>] option specifies how many lines from
the annotation are to be printed.
Not specifieing -n or -n 0 will just produce the tag names
Just -n or -n 1 will show the first line of the annotation on
the tag line.
Other valuse for -n will show that number of lines from the annotation.
The exit code used to indicate if any tag was found.
This is changed due to a different implementation.
A good way to test a tag for existence is to use:
git show-ref --quiet --verify refs/tags/$TAGNAME
Signed-off-by: Matthijs Melchior <mmelchior@xs4all.nl>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Make people aware of our testsuite, and of non-ASCII encodings.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* np/pack:
fix repack with --max-pack-size
builtin-pack-object: cache small deltas
git-pack-objects: cache small deltas between big objects
builtin-pack-objects: don't fail, if delta is not possible
* maint:
Use =20 when rfc2047 encoding spaces.
Create a new manpage for the gitignore format, and reference it elsewhere
Documentation: robustify asciidoc GIT_VERSION replacement
Only git-ls-files(1) describes the gitignore format in detail, and it does so
with reference to git-ls-files options. Most users don't use the plumbing
command git-ls-files directly, and shouldn't have to look in its manpage for
information on the gitignore format.
Create a new manpage gitignore(5) (Documentation/gitignore.txt), and factor
out the gitignore documentation into that file, changing it to refer to
.gitignore and $GIT_DIR/info/exclude as used by porcelain commands. Reference
gitignore(5) from other relevant manpages and documentation. Remove
now-redundant information on exclude patterns from git-ls-files(1), leaving
only information on how git-ls-files options specify exclude patterns and what
precedence they have.
Signed-off-by: Josh Triplett <josh@freedesktop.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Instead of using sed on the resulting file, we now have a
git_version asciidoc attribute. This means that we don't
pipe the output of asciidoc, which means we can detect build
failures.
Problem reported by Scott Lamb, solution suggested by Jonas Fonseca.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
git-config: Improve documentation of git-config file handling
git-config: Various small fixes to asciidoc documentation
decode_85(): fix missing return.
fix signed range problems with hex conversions
* maint-1.5.1:
git-config: Improve documentation of git-config file handling
git-config: Various small fixes to asciidoc documentation
decode_85(): fix missing return.
fix signed range problems with hex conversions
The description which files git-config uses and how the various
command line options and environment variables affect its
behaviour was incomplete, outdated and confusing.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add '' around the only mentioned commandline option that didn't
have it.
Make reference to section EXAMPLE a link and rename it to
EXAMPLES because it actually contains a lot of examples.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Creating deltas between big blobs is a CPU and memory intensive task.
In the writing phase, all (not reused) deltas are redone.
This patch adds support for caching deltas from the deltifing phase, so
that that the writing phase is faster.
The caching is limited to small deltas to avoid increasing memory usage very much.
The implemented limit is (memory needed to create the delta)/1024.
Signed-off-by: Martin Koegler <mkoegler@auto.tuwien.ac.at>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
cvsserver: Fix some typos in asciidoc documentation
cvsserver: Note that CVS_SERVER can also be specified as method variable
cvsserver: Correct inetd.conf example in asciidoc documentation
user-manual: fixed typo in example
Add test case for $Id$ expanded in the repository
git-svn: avoid md5 calculation entirely if SVN doesn't provide one
Makefile: Remove git-fsck and git-verify-pack from PROGRAMS
Fix stupid typo in lookup_tag()
git-gui: Guess our share/git-gui/lib path at runtime if possible
Correct key bindings to Control-<foo>
git-gui: Tighten internal pattern match for lib/ directory
Reasonably new versions of the cvs CLI client allow one to
specifiy CVS_SERVER as a method variable directly in
CVSROOT. This is way more convinient than using an
environment variable since it gets saved in CVS/Root.
Since I only discovered this by accident I guess there
might be others out there that learnt CVS on the 1.11
series (or even earlier) and profit from such a note
about cvs improvements in the last couple years.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
While the given example worked, it made us look rather
incompetent. Give the correct reason why one needs the
more complex syntax and change the example to reflect
that.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This command can be used to initialize, update and inspect submodules. It
uses a .gitmodules file, readable by git-config, in the top level directory
of the 'superproject' to specify a mapping between submodule paths and
repository url.
Example .gitmodules layout:
[module "git"]
url = git://git.kernel.org/pub/scm/git/git.git
With this entry in .gitmodules (and a commit reference in the index entry for
the path "git"), the command 'git submodule init' will clone the repository
at kernel.org into the directory "git".
Known issues
============
There is currently no way to override the url found in the .gitmodules file,
except by manually creating the subproject repository. The place to fix this
in the script has a rather long comment about a possible plan.
Funny paths will be quoted in the output from git-ls-files, but git-submodule
does not attempt to unquote (or even detect the presence of) such paths.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
Fix git-svn to handle svn not reporting the md5sum of a file, and test.
Fix mishandling of $Id$ expanded in the repository copy in convert.c
More echo "$user_message" fixes.
Add tests for the last two fixes.
git-commit: use printf '%s\n' instead of echo on user-supplied strings
git-am: use printf instead of echo on user-supplied strings
Documentation: Add definition of "evil merge" to GIT Glossary
Replace the last 'dircache's by 'index'
Documentation: Clean up links in GIT Glossary
* maint-1.5.1:
Fix git-svn to handle svn not reporting the md5sum of a file, and test.
More echo "$user_message" fixes.
Add tests for the last two fixes.
git-commit: use printf '%s\n' instead of echo on user-supplied strings
git-am: use printf instead of echo on user-supplied strings
Documentation: Add definition of "evil merge" to GIT Glossary
Replace the last 'dircache's by 'index'
Documentation: Clean up links in GIT Glossary
Ensure that the same link is not repeated in single glossary entry,
and that there is no self-link i.e. link to current entry.
Add links to other definitions in git glossary.
Remove inappropriate (nonsense) links, or change link to link to
correct definition (to correct term).
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The diffstat can be controlled either with command-line options
(--summary|--no-summary) or with merge.diffstat. The default is
left as it was: diffstat is active by default.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
I believe noone uses git-applymbox, and noone definitely should, since it
is supposed to be completely superseded and everything by its younger
cousin git-am. The only known person in the universe to use it was Linus
and he declared some time ago that he will try to use git-am instead in his
famous dotest script.
The trouble is that git-applymbox existence creates confusing UI. I'm a bit
like a recycled newbie to the git porcelain and *I* was confused by
git-applymbox primitiveness until I've realized a while later that I'm of
course using the wrong command.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch documents the branch.autosetupmerge config option, added
by commit 0746d19a.
Signed-off-by: Paolo Bonzini <bonzini@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Often users want to know not which tagged version a commit came
after, but which tagged version a commit is contained within.
This latter task is the job of git-name-rev, but most users are
looking to git-describe to do the job.
Junio suggested we make `git describe --contains` run the correct
tool, `git name-rev`, and that's exactly what we do here. The output
of name-rev was adjusted slightly through the new --name-only option,
allowing describe to execv into name-rev and maintain its current
output format.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-add reads this variable, and honours the contents of that file if that
exists. Match this behaviour in git-status, too.
Noticed by Evan Carroll on IRC.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We do not appreciate C99 initializers, declarations after statements,
or "0" instead of "NULL".
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add --max-pack-size parsing and usage messages.
Upgrade git-repack.sh to handle multiple packfile names,
and build packfiles in GIT_OBJECT_DIRECTORY not GIT_DIR.
Update documentation.
Signed-off-by: Dana L. How <danahow@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add -l/--long option to git-ls-tree command, which displays
object size of a blob entry. Object size is placed after
object id (left-justified with minimum width of 7 characters).
For non-blob entries `-' is used.
Rationale: for non-blob entries size of an object has no much
meaning, and is not very interesting. Moreover, in planned
pack v4 tree objects would be constructed on demand, so tree
size would need to be calculated.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch introduces --extended-regexp and --regexp-ignore-case options to
tune what kind of patterns the pattern-limiting options (--grep, --author,
...) accept.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
annotate: make it work from subdirectories.
git-config: Correct asciidoc documentation for --int/--bool
t1300: Add tests for git-config --bool --get
unpack-trees.c: verify_uptodate: remove dead code
Use PATH_MAX instead of TEMPFILE_PATH_LEN
branch: fix segfault when resolving an invalid HEAD
* maint-1.5.1:
annotate: make it work from subdirectories.
git-config: Correct asciidoc documentation for --int/--bool
t1300: Add tests for git-config --bool --get
unpack-trees.c: verify_uptodate: remove dead code
Use PATH_MAX instead of TEMPFILE_PATH_LEN
branch: fix segfault when resolving an invalid HEAD
The asciidoc documentation seemed to indicate that type specifiers
are honoured on writing operations which they aren't. Make this
more clear.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* np/pack:
deprecate the new loose object header format
make "repack -f" imply "pack-objects --no-reuse-object"
allow for undeltified objects not to be reused
The todo list at the end of the user manual says that something must be
said about .gitignore. Also, there seems to be a lack of documentation
on how to choose between the various types of ignore files (.gitignore
vs. .git/info/exclude, etc.).
This patch adds a section on ignoring files which try to introduce how
to tell git about ignored files, and how the different strategies
complement eachother.
The syntax of exclude patterns is explained in a simplified manner, with
a reference to git-ls-files(1) which already contains a more thorough
explanation.
Signed-off-by: Johan Herland <johan@herland.net>
Another amusing git exploration example brought up in irc. (Credit to
aeruder for the complete solution.)
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
I don't really want to look like we're encouraging the shared repository
thing. Take down some of the argument for using purely
single-developer-owned repositories and collaborating using patches and
pulls instead.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
The embarassing history of this tutorial is that I started it without
really understanding the index well, so I avoided mentioning it.
And we all got the idea that "index" was a word to avoid using around
newbies, but it was reluctantly mentioned that *something* had to be
said. The result is a little awkward: the discussion of the index never
actually uses that word, and isn't well-integrated into the surrounding
material.
Let's just go ahead and use the word "index" from the very start, and
try to demonstrate its use with a minimum of lecturing.
Also, remove discussion of using git-commit with explicit filenames.
We're already a bit slow here to get people to their first commit, and
I'm not convinced this is really so important.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Mention the user manual, especially as an alternative introduction for
user's mainly interested in read-only operations.
And fix a typo while we're there.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
* 'maint' of git://linux-nfs.org/~bfields/git:
user-manual: reorganize public git repo discussion
user-manual: listing commits reachable from some refs not others
user-manual: introduce git
user-manual: add a "counting commits" example
user-manual: move howto/using-topic-branches into manual
user-manual: move howto/make-dist.txt into user manual
Documentation: remove howto's now incorporated into manual
user-manual: move quick-start to an appendix
glossary: expand and clarify some definitions, prune cross-references
user-manual: revise birdseye-view chapter
Add a birdview-on-the-source-code section to the user manual
git-rev-list(1) talks about patterns as values for the
--grep, --committed etc. parameters, without going into detail.
This patch mentions that these patterns are actually regexps.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Helping a couple people set up public repos recently, I wanted to point
them at this piece of the user manual, but found it wasn't as helpful as
it could be:
- It starts with a big explanation of why you'd want a public
repository, not necessary in their case since they already knew
why they wanted that. So, separate that out.
- It skimps on some of the git-daemon details, and puts the http
export information first. Fix that.
Also group all the public repo subsections into a single section, and do
some miscellaneous related editing.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Move howto/using-topic-branches into the user manual as an example for
the "sharing development" chapter. While we're at it, remove some
discussion that's covered in earlier chapters, modernize somewhat (use
separate-heads setup, remotes, replace "whatchanged" by "log", etc.),
and replace syntax we'd need to explain by syntax we've already covered
(e.g. old..new instead of new ^old).
The result may not really describe what Tony Luck does any more.... Hope
that's not annoying.
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
There seems to be a perception that the howto's are bit-rotting a
little. The manual might be a more visible location for some of them,
and make-dist.txt seems like a good candidate to include as an example
in the manual.
For now, incorporate much of it verbatim. Later we may want to update
the example a bit.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
These two howto's have both been copied into the manual. I'd rather not
maintain both versions if possible, and I think the user-manual will be
more visible than the howto directory. (Though I wouldn't mind some
duplication if people really like having them here.)
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
The quick start interrupts the flow of the manual a bit. Move it to
"appendix A" but add a reference to it in the preface. Also rename the
todo chapter to "appendix B", and revise the preface a little.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Revise and expand some of the definitions in the glossary, based in part
on a recent thread started by a user looking for help with some of the
jargon. I've borrowed some of the language from Linus's email on that
thread. (I'm assuming standing permission to plagiarize Linus's
email....)
Also start making a few changes to mitigate the appearance of
"circularity" mentioned in that thread:
- feel free to use somewhat longer definitions and to explain
some things more than once instead of relying purely on
cross-references
- don't use cross-references when they're redundant: eliminate
self-references and repeated references to the same entry.
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Some revisions suggested by Junio along with some minor style fixes and
one compile fix (asterisks need escaping).
Cc: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
During the discussion of core.excludesfile in the user-manual, I realized
that the configuration wasn't mentioned in the man pages.
Signed-off-by: Michael Hendricks <michael@ndrix.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
In http://thread.gmane.org/gmane.comp.version-control.git/42479,
a birdview on the source code was requested.
J. Bruce Fields suggested that my reply should be included in the
user manual, and there was nothing of an outcry, so here it is,
not 2 months later.
It includes modifications as suggested by J. Bruce Fields, Karl
Hasselström and Daniel Barkalow.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
* maint:
format-patch: add MIME-Version header when we add content-type.
Fixed link in user-manual
import-tars: Use the "Link indicator" to identify directories
git name-rev writes beyond the end of malloc() with large generations
Documentation/branch: fix small typo in -D example
$Id$ is present already in SVN and CVS; it would mean that people
converting their existing repositories won't have to make any changes to
the source files should they want to make use of the ident attribute.
Given that it's a feature that's meant to calm those very people, it
seems obtuse to make them edit every file just to make use of it.
I think that bzr uses $Id$; Mercurial has examples hooks for $Id$;
monotone has $Id$ on its wishlist. I can't think of a good reason not
to stick with the de-facto standard and call ours $Id$ instead of
$ident$.
Signed-off-by: Andy Parkins <andyparkins@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
Prepare for 1.5.1.5 Release Notes
gitweb: Add a few comments about %feature hash
git-am: Clean up the asciidoc documentation
Documentation: format-patch has no --mbox option
builtin-log.c: Fix typo in comment
Fix git-clone buglet for remote case.
Hopefully we will have 1.5.2 soonish, to contain all of these,
but we should summarize what we have done regardless.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add --keep to synopsis.
The synopsys used a mix of tabs and spaces, unify to use only
spaces.
Shuffle options around in synopsys and description for grouping
them logically.
Add more gitlink references to other commands.
Various grammatical fixes and improvements.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-applymbox and git-mailinfo refer to a --mbox option of
git-format-patch when talking about their -k options. But there
is no such option. What -k does to the former two commands is
to keep the Subject: lines unmunged, meant to be used on output
generated with format-patch -k.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Split description of pretty formats into list of pretty options
(--pretty and --encoding) in new file Documentation/pretty-options.txt
and description of formats itself as a separate "PRETTY FORMATS"
section in pretty-formats.txt
While at it correct formatting a bit, to be better laid out in the
resulting manpages: git-rev-list(1), git-show(1), git-log(1) and
git-diff-tree(1). Those manpages now include pretty options in the
same place as it was before, and description of formats just after
all options.
Inspired by the split into two filesdocumentation for merge strategies:
Documentation/merge-options.txt and Documentation/merge-strategies.txt
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Currently
$ git grep '\([^t]\|^\)'link: user-manual.txt
gives four hits that refer to .txt version of the documentation
set, but at least "hooks" and "cvs-migration" have HTML variants
installed, so refer to them instead.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Small additional changes to the cbb84e5d17
commit, which introduced documentation to pre-receive and post-receive:
- Mention that stdout and stderr are equivalent.
- Add one cross-section link and fix one other.
- Fix information on advantages of post-receive over post-update.
Signed-off-by: Jan Hudec <bulb@ucw.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
checkout: allow detaching to HEAD even when switching to the tip of a branch
Updated documentation of hooks in git-receive-pack.
Allow fetching references from any namespace
tiny fix in documentation of git-clone
Fix an unmatched comment end in arm/sha1_arm.S
Added documentation of pre-receive and post-receive hooks and updated
documentation of update and post-update hooks.
[jc: with minor copy-editing]
Signed-off-by: Jan Hudec <bulb@ucw.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-checkout is also adapted to make use of this new option
instead of the handcrafted command sequence.
Signed-off-by: Sven Verdoolaege <skimo@kotnet.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This option causes 'git gc' to more aggressively optimize the
repository at the cost of taking much more wall clock and CPU time.
Today this option causes git-pack-objects to use --no-use-delta
option, and it allows the --window parameter to be set via the
gc.aggressiveWindow configuration parameter.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add config variables pack.compression and core.loosecompression ,
and switch --compression=level to pack-objects.
Loose objects will be compressed using core.loosecompression if set,
else core.compression if set, else Z_BEST_SPEED.
Packed objects will be compressed using --compression=level if seen,
else pack.compression if set, else core.compression if set,
else Z_DEFAULT_COMPRESSION. This is the "pack compression level".
Loose objects added to a pack undeltified will be recompressed
to the pack compression level if it is unequal to the current
loose compression level by the preceding rules, or if the loose
object was written while core.legacyheaders = true. Newly
deltified loose objects are always compressed to the current
pack compression level.
Previously packed objects added to a pack are recompressed
to the current pack compression level exactly when their
deltification status changes, since the previous pack data
cannot be reused.
In either case, the --no-reuse-object switch from the first
patch below will always force recompression to the current pack
compression level, instead of assuming the pack compression level
hasn't changed and pack data can be reused when possible.
This applies on top of the following patches from Nicolas Pitre:
[PATCH] allow for undeltified objects not to be reused
[PATCH] make "repack -f" imply "pack-objects --no-reuse-object"
Signed-off-by: Dana L. How <danahow@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Now that we encourage and actively preserve objects in a packed form
more agressively than we did at the time the new loose object format and
core.legacyheaders were introduced, that extra loose object format
doesn't appear to be worth it anymore.
Because the packing of loose objects has to go through the delta match
loop anyway, and since most of them should end up being deltified in
most cases, there is really little advantage to have this parallel loose
object format as the CPU savings it might provide is rather lost in the
noise in the end.
This patch gets rid of core.legacyheaders, preserve the legacy format as
the only writable loose object format and deprecate the other one to
keep things simpler.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Currently non deltified object data is always reused when possible.
This means that any change to core.compression has no effect on those
objects as they don't get recompressed when repacking them.
Let's add a --no-reuse-object flag to git-repack in order to force
recompression of all objects when desired.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
.mailmap: add some aliases
SPECIFYING RANGES typo fix: it it => it is
git-clone: don't get fooled by $PWD
Fix documentation of tag in git-fast-import.txt
More typo fixes from Santi Béjar, plus a couple other mistakes I noticed
along the way.
Cc: Santi Béjar <sbejar@gmail.com>
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
- git-ls-files.txt: typo in description of --ignored
- git-clean.txt: s/forceRequire/requireForce/
Signed-off-by: Michael Spang <mspang@uwaterloo.ca>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
Documentation: don't reference non-existent 'git-cvsapplycommit'
user-manual: stop deprecating the manual
user-manual: miscellaneous editing
user-manual: fix .gitconfig editing examples
user-manual: clean up fast-forward and dangling-objects sections
user-manual: add section ID's
user-manual: more discussion of detached heads, fix typos
git-gui: Allow spaces in path to 'wish'
gitk: Allow user to choose whether to see the diff, old file, or new file
This command was implemented, but not documented in
dfdac5d9b8.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <junkio@cox.net>
It's just as much a work-in-progress, but at least now it's gotten
enough technical review to shake out most of the really bad lies, so
hopefully it doesn't do any actual damage. And if we encourage people
to read it, they'll be more likely to whine about it, which will help
get it fixed faster.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
I cherry-picked some additional miscellaneous fixes from those suggested
by Santi Béjar, including fixes to:
- correct discussion of repository/HEAD->repository shortcut
- add mention of git-mergetool
- add mention of --track
- mention "-f" as well as "+" for fetch
Cc: Santi Béjar <sbejar@gmail.com>
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Santi Béjar points out that when telling people how to "introduce
themselves" to git we're advising them to replace their entire
.gitconfig file. Fix that.
Cc: "Santi Béjar <sbejar@gmail.com>
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
The previous commit calls attention to the fact that we have two
sections each devoted to fast-forwards and to dangling objects. Revise
and attempt to differentiate them a bit. Some more reorganization may
be required later....
Signed-off-by: J. Bruce Fields
Any section lacking an id gets an annoying warning when you build
the manual. More seriously, the table of contents then generates
volatile id's which change with every build, with the effect that
we get URL's that change all the time.
The ID's are manually generated and sometimes inconsistent, but
that's OK.
XXX: what to do about the preface?
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Nicolas Pitre pointed out a couple typos and some room for improvement
in the discussion of detached heads.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Cc: Nicolas Pitre <nico@cam.org>
* maint:
Small correction in reading of commit headers
Documentation: fix typo in git-remote.txt
Add test for blame corner cases.
blame: -C -C -C
blame: Notice a wholesale incorporation of an existing file.
Fix --boundary output
diff format documentation: describe raw combined diff format
Mention version 1.5.1 in tutorial and user-manual
Add --no-rebase option to git-svn dcommit
Fix markup in git-svn man page
Add description of raw combined diff format to diff-formats.txt,
as "diff format for merges" section, before "Generating patches..."
section.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Most other documentation will frequently be read from an installation
of git so will naturally be associated with the installed version.
But these two documents in particular are often read from web pages
while users are still exploring git. It's important to mention
version 1.5.1 since these documents provide example commands that
won't work with previous versions of git.
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-svn dcommit exports commits to Subversion, then imports them back
to git again, and last but not least rebases or resets HEAD to the
last of the new commits. I guess this rebasing is convenient when
using just git, but when the commits to be exported are managed by
StGIT, it's really annoying. So add an option to disable this
behavior. And document it, too!
Signed-off-by: Karl Hasselström <kha@treskal.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Some of the existing markup was just plain broken, and some subcommand
options weren't indented properly.
Signed-off-by: Karl Hasselström <kha@treskal.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When the -v is passed, git-tag will exit after it is processed like it
does with the -d and -l options. Additionally, missing code block caused
wrong rendering of an option example.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
gitweb: use decode_utf8 directly
posix compatibility for t4200
Document 'opendiff' value in config.txt and git-mergetool.txt
Allow PERL_PATH="/usr/bin/env perl"
Make xstrndup common
diff.c: fix "size cache" handling.
http-fetch: Disable use of curl multi support for libcurl < 7.16.
It can be either hostname/address, or a full path to a
local executable.
Signed-off-by: Jari Aalto <jari.aalto@cante.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Separate things to be checked when making commits, and things
to be checked when sending patches.
Signed-off-by: Jari Aalto <jari.aalto@cante.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch adds a new 'find-rev' command to git-svn that lets you easily
translate between SVN revision numbers and git tree-ish.
Signed-off-by: Adam Roben <aroben@apple.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
With this "git blame -b -s HEAD~n..HEAD" becomes a nicer way to
review the result of recent changes in context.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Some other programs get the user's email address from $EMAIL, so fall back to
that if we don't have a Git-specific email address.
Signed-off-by: Josh Triplett <josh@freedesktop.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
http.c: Fix problem with repeated calls of http_init
Add missing reference to GIT_COMMITTER_DATE in git-commit-tree documentation
Fix import-tars fix.
Update .mailmap with "Michael"
Do not barf on too long action description
Catch empty pathnames in trees during fsck
Don't allow empty pathnames in fast-import
import-tars: be nice to wrong directory modes
git-svn: Added 'find-rev' command
git shortlog documentation: add long options and fix a typo
This patch adds a new 'find-rev' command to git-svn that lets you easily
translate between SVN revision numbers and git tree-ish.
Signed-off-by: Adam Roben <aroben@apple.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Documentation/git-http-fetch.txt: --recover to resume a failed fetch
operation.
Signed-off-by: Andrew Ruder <andy@aeruder.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Documentation/git-local-fetch.txt: -s to use
symbolic links instead of file-to-file copy, -l
to use hardlinks, -n to never use file-to-file
copies, --recover to resume a failed fetch.
Signed-off-by: Andrew Ruder <andy@aeruder.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Documentation/git-http-push.txt: Changing --complete to --all. Added
documentation for -d and -D to remote remote refs.
Signed-off-by: Andrew Ruder <andy@aeruder.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Documenting alternate ways to use -L:
-L /regex/,end
-L start,+offset
Signed-off-by: Andrew Ruder <andy@aeruder.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Documentation/git-grep.txt: Document -F/--fixed-strings to
search for non-regexp patterns. Document -I to not search
binary files. Document -<num> as a shortcut for -C<num>.
Signed-off-by: Andrew Ruder <andy@aeruder.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Documentation/git-fmt-merge-msg.txt:
--summary to list commit summaries on merge
--no-summary
--file to take merged objects from a file.
Configuration option merge.summary
Signed-off-by: Andrew Ruder <andy@aeruder.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Document --quiet/-q and --verbose/-v
Add -n as an alternate for --no-tags
Fix some whitespace issues
Signed-off-by: Andrew Ruder <andy@aeruder.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
-n is not a short form of --no-index as the documentation
suggests. Removing it from the documentation and command
usage string.
Signed-off-by: Andrew Ruder <andy@aeruder.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
Start preparing for 1.5.1.3
Sanitize @to recipients.
git-svn: Ignore usernames in URLs in find_by_url
Document --dry-run and envelope-sender for git-send-email.
Allow users to optionally specify their envelope sender.
Ensure clean addresses are always used with Net::SMTP
Validate @recipients before using it for sendmail and Net::SMTP.
Perform correct quoting of recipient names.
Change the scope of the $cc variable as it is not needed outside of send_message.
Debugging cleanup improvements
Prefix Dry- to the message status to denote dry-runs.
Document --dry-run parameter to send-email.
git-svn: Don't rely on $_ after making a function call
Fix handle leak in write_tree
Actually handle some-low memory conditions
Conflicts:
RelNotes
git-send-email.perl
This adds --date={local,relative,default} option to log family of commands,
to allow displaying timestamps in user's local timezone, relative time, or
the default format.
Existing --relative-date option is a synonym of --date=relative; we could
probably deprecate it in the long run.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Catch the documentation up with the rest of this patchset.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
- Do not break the line when it's not needed
- s/Your/You
Signed-off-by: Luiz Fernando N. Capitulino <lcapitulino@mandriva.com.br>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The interface is similar to the custom low-level merge drivers.
First you configure your filter driver by defining 'filter.<name>.*'
variables in the configuration.
filter.<name>.clean filter command to run upon checkin
filter.<name>.smudge filter command to run upon checkout
Then you assign filter attribute to each path, whose name
matches the custom filter driver's name.
Example:
(in .gitattributes)
*.c filter=indent
(in config)
[filter "indent"]
clean = indent
smudge = cat
Signed-off-by: Junio C Hamano <junkio@cox.net>
The 'ident' attribute set to path squashes "$ident:<any bytes
except dollor sign>$" to "$ident$" upon checkin, and expands it
to "$ident: <blob SHA-1> $" upon checkout.
As we have two conversions that affect checkin/checkout paths,
clarify how they interact with each other.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
Documentation/git-reset.txt: suggest git commit --amend in example.
Build RPM with ETC_GITCONFIG=/etc/gitconfig
Ignore all man sections as they are generated files.
Fix typo in git-am: s/Was is/Was it/
Reverse the order of -b and --track in the man page.
dir.c(common_prefix): Fix two bugs
Conflicts:
git.spec.in
Add a new configuration option clean.requireForce. If set, git-clean will
refuse to run, unless forced with the new -f option, or not acting due to -n.
Signed-off-by: Josh Triplett <josh@freedesktop.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Using "-b --track newbranch oldbranch" gives the error:
git checkout: updating paths is incompatible with switching
branches/forcing
However, "--track -b ..." works just fine.
Signed-off-by: Brian Gernhardt <benji@silverinsanity.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* 'jc/attr': (28 commits)
lockfile: record the primary process.
convert.c: restructure the attribute checking part.
Fix bogus linked-list management for user defined merge drivers.
Simplify calling of CR/LF conversion routines
Document gitattributes(5)
Update 'crlf' attribute semantics.
Documentation: support manual section (5) - file formats.
Simplify code to find recursive merge driver.
Counto-fix in merge-recursive
Fix funny types used in attribute value representation
Allow low-level driver to specify different behaviour during internal merge.
Custom low-level merge driver: change the configuration scheme.
Allow the default low-level merge driver to be configured.
Custom low-level merge driver support.
Add a demonstration/test of customized merge.
Allow specifying specialized merge-backend per path.
merge-recursive: separate out xdl_merge() interface.
Allow more than true/false to attributes.
Document git-check-attr
Change attribute negation marker from '!' to '-'.
...
* np/pack: (27 commits)
document --index-version for index-pack and pack-objects
pack-objects: remove obsolete comments
pack-objects: better check_object() performances
add get_size_from_delta()
pack-objects: make in_pack_header_size a variable of its own
pack-objects: get rid of create_final_object_list()
pack-objects: get rid of reuse_cached_pack
pack-objects: clean up list sorting
pack-objects: rework check_delta_limit usage
pack-objects: equal objects in size should delta against newer objects
pack-objects: optimize preferred base handling a bit
clean up add_object_entry()
tests for various pack index features
use test-genrandom in tests instead of /dev/urandom
simple random data generator for tests
validate reused pack data with CRC when possible
allow forcing index v2 and 64-bit offset treshold
pack-redundant.c: learn about index v2
show-index.c: learn about index v2
sha1_file.c: learn about index version 2
...
* maint:
GIT 1.5.1.2
perl: install private Error.pm if the site version is older than our own
git-clone: fix dumb protocol transport to clone from pack-pruned ref
Documentation/git-config.txt: Added documentation for --system
Documentation/builtin-config.c: Added --system to the short usage
Signed-off-by: Andrew Ruder <andy@aeruder.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
In asciidoc 7.1.2 and prior there is no obvious way to get:
'add'ing
to emphasize only the "add", instead it treats the first apostrophe as the
beginning of an emphasis, and the second apostrophe as a regular
apostrophe and makes the rest of the line an emphasis since there is no
closing apostrophe. In the newer asciidoc you can do it pretty easily
with __add__ing but I'm not sure it would be best to make that a prereq
for something as silly as this.
Signed-off-by: Andrew Ruder <andy@aeruder.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Documentation/git-cherry-pick.txt: Remove --replay as it is not
handled by the code (-r is however).
Signed-off-by: Andrew Ruder <andy@aeruder.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Documentation/git-archive.txt: Document -v/--verbose option.
Add -l as short form of --list.
Signed-off-by: Andrew Ruder <andy@aeruder.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
