A race between repacking and using pack bitmaps has been corrected.
* jk/check-pack-valid-before-opening-bitmap:
pack-bitmap: check pack validity when opening bitmap
"git read-tree" had a codepath where blobs are fetched one-by-one
from the promisor remote, which has been corrected to fetch in bulk.
* jt/bulk-prefetch:
cache-tree: prefetch in partial clone read-tree
unpack-trees: refactor prefetching code
CI update.
* js/ci-check-whitespace-updates:
ci(check-whitespace): restrict to the intended commits
ci(check-whitespace): stop requiring a read/write token
Documentation around GIT_CONFIG has been updated.
* jk/config-env-doc:
doc/git-config: simplify "override" advice for FILES section
doc/git-config: clarify GIT_CONFIG environment variable
doc/git-config: explain --file instead of referring to GIT_CONFIG
By doing ls -1 .git/{reftable,refs/heads}, we can capture changes to both
reftable and packed/loose ref storage.
This relies on the fact that git-pack-refs (which we're looking for here)
changes the number (loose/packed storage) and/or names (reftable) files used for
ref storage.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous code tested this by writing $ZERO_OID explicitly in the packed-refs
file. This is a type of corruption that doesn't reflect realistic use-cases. In
addition, even the ref-store test-tool refuses to write invalid OIDs.
(update-ref interprets $ZERO_OID is deleting the ref).
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test takes a lock on the target of a symref, and then verifies that it is
possible to expire the symref's reflog. In reftable, one can only take a global
lock (which would prevent the symref reflog from being expired altogether.)
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The tests verifies that "pack-refs" causes loose refs to be packed. As both
loose and packed refs are concepts specific to the files backend, mark the test
as REFFILES.
Check the outcome of the pack-refs operation. This was apparently forgotten in
the commit introducing this test: 16feb99d (Mar 26 2017, "t1405: some basic
tests on main ref store").
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The CURLOPT_FILE name is an alias for CURLOPT_WRITEDATA, the
CURLOPT_WRITEDATA name has been preferred since curl 7.9.7, released
in May 2002[1].
1. https://curl.se/libcurl/c/CURLOPT_WRITEDATA.html
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the conditional use of CURLAUTH_DIGEST_IE and
CURLOPT_USE_SSL. These two have been split from earlier simpler checks
against LIBCURL_VERSION_NUM for ease of review.
According to
https://github.com/curl/curl/blob/master/docs/libcurl/symbols-in-versions
the CURLAUTH_DIGEST_IE flag became available in 7.19.3, and
CURLOPT_USE_SSL in 7.17.0.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
cf2dc1c238 (speed up alt_odb_usable() with many alternates, 2021-07-07)
introduced the function fspathhash() for calculating path hashes while
respecting the configuration option core.ignorecase. Call it instead of
open-coding it; the resulting code is shorter and less repetitive.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the last commit we dropped support for curl < 7.16.0, let's
continue that and drop support for versions older than 7.19.3. This
allows us to simplify the code by getting rid of some "#ifdef"'s.
Git was broken with vanilla curl < 7.19.4 from v2.12.0 until
v2.15.0. Compiling with it was broken by using CURLPROTO_* outside any
"#ifdef" in aeae4db174 (http: create function to get curl allowed
protocols, 2016-12-14), and fixed in v2.15.0 in f18777ba6e (http: fix
handling of missing CURLPROTO_*, 2017-08-11).
It's unclear how much anyone was impacted by that in practice, since
as noted in [1] RHEL versions using curl older than that still
compiled, because RedHat backported some features. Perhaps other
vendors did the same.
Still, it's one datapoint indicating that it wasn't in active use at
the time. That (the v2.12.0 release) was in Feb 24, 2017, with v2.15.0
on Oct 30, 2017, it's now mid-2021.
1. http://lore.kernel.org/git/c8a2716d-76ac-735c-57f9-175ca3acbcb0@jupiterrise.com;
followed-up by f18777ba6e (http: fix handling of missing CURLPROTO_*,
2017-08-11)
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With a54e938e5b (strbuf: support long paths w/o read rights in
strbuf_getcwd() on FreeBSD, 2017-03-26) we had t0001 break on systems
like OpenBSD and AIX whose getcwd(3) has standard (but not like glibc
et al) behavior.
This was partially fixed in bed67874e2 (t0001: skip test with
restrictive permissions if getpwd(3) respects them, 2017-08-07).
The problem with that fix is that while its analysis of the problem is
correct, it doesn't actually call getcwd(3), instead it invokes "pwd
-P". There is no guarantee that "pwd -P" is going to call getcwd(3),
as opposed to e.g. being a shell built-in.
On AIX under both bash and ksh this test breaks because "pwd -P" will
happily display the current working directory, but getcwd(3) called by
the "git init" we're testing here will fail to get it.
I checked whether clobbering the $PWD environment variable would
affect it, and it didn't. Presumably these shells keep track of their
working directory internally.
There's possible follow-up work here in teaching strbuf_getcwd() to
get the working directory with whatever method "pwd" uses on these
platforms. See [1] for a discussion of that, but let's take the easy
way out here and just skip these tests by fixing the
GETCWD_IGNORES_PERMS prerequisite to match the limitations of
strbuf_getcwd().
1. https://lore.kernel.org/git/b650bef5-d739-d98d-e9f1-fa292b6ce982@web.de/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the last commit we dropped support for curl < 7.11.1, let's
continue that and drop support for versions older than 7.16.0. This
allows us to get rid of some now-obsolete #ifdefs.
Choosing 7.16.0 is a somewhat arbitrary cutoff:
1. It came out in October of 2006, almost 15 years ago.
Besides being a nice round number, around 10 years is
a common end-of-life support period, even for conservative
distributions.
2. That version introduced the curl_multi interface, which
gives us a lot of bang for the buck in removing #ifdefs
RHEL 5 came with curl 7.15.5[1] (released in August 2006). RHEL 5's
extended life cycle program ended on 2020-11-30[1]. RHEL 6 comes with
curl 7.19.7 (released in November 2009), and RHEL 7 comes with
7.29.0 (released in February 2013).
1. http://lore.kernel.org/git/873e1f31-2a96-5b72-2f20-a5816cad1b51@jupiterrise.com
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Drop support for this ancient version of curl and simplify the code by
allowing us get rid of some "#ifdef"'s.
Git will not build with vanilla curl older than 7.11.1 due our use of
CURLOPT_POSTFIELDSIZE in 37ee680d9b
(http.postbuffer: allow full range of ssize_t values,
2017-04-11). This field was introduced in curl 7.11.1.
We could solve these compilation problems with more #ifdefs,
but it's not worth the trouble. Version 7.11.1 came out in
March of 2004, over 17 years ago. Let's declare that too old
and drop any existing ifdefs that go further back. One
obvious benefit is that we'll have fewer conditional bits
cluttering the code.
This patch drops all #ifdefs that reference older versions
(note that curl's preprocessor macros are in hex, so we're
looking for 070b01, not 071101).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Three hyphens are rendered verbatim, so "--" has to be used to produce a
dash. There is no double arrow ("<->" is rendered as "<→"), so a left
and right arrow "<-->" have to be combined for that.
So fix asciidoc output for special characters. This is similar to fixes
in commit de82095a95 (doc hash-function-transition: fix asciidoc output,
2021-02-05).
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
pool_alloc_filespec() was written so that the code when pool != NULL
mimicked the code from alloc_filespec(), which including allocating
enough extra space for the path and then copying it. However, the path
passed to pool_alloc_filespec() is always going to already be in the
same memory pool, so we may as well reuse it instead of copying it.
For the testcases mentioned in commit 557ac0350d ("merge-ort: begin
performance work; instrument with trace2_region_* calls", 2020-10-28),
this change improves the performance as follows:
Before After
no-renames: 198.5 ms ± 3.4 ms 198.3 ms ± 2.9 ms
mega-renames: 679.1 ms ± 5.6 ms 661.8 ms ± 5.9 ms
just-one-mega: 271.9 ms ± 2.8 ms 264.6 ms ± 2.5 ms
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For the testcases mentioned in commit 557ac0350d ("merge-ort: begin
performance work; instrument with trace2_region_* calls", 2020-10-28),
this change improves the performance as follows:
Before After
no-renames: 198.1 ms ± 2.6 ms 198.5 ms ± 3.4 ms
mega-renames: 715.8 ms ± 4.0 ms 679.1 ms ± 5.6 ms
just-one-mega: 276.8 ms ± 4.2 ms 271.9 ms ± 2.8 ms
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We want to be able to allocate filespecs and filepairs using a mem_pool.
However, filespec data will still remain outside the pool (perhaps in
the future we could plumb the pool through the various diff APIs to
allocate the filespec data too, but for now we are limiting the scope).
Add some extra functions to allocate these appropriately based on the
non-NULL-ness of opt->priv->pool, as well as some extra functions to
handle correctly deallocating the relevant parts of them. A future
commit will make use of these new functions.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For all the strmaps (including strintmaps and strsets) whose memory is
unconditionally freed as part of clear_or_reinit_internal_opts(), switch
them over to using our new memory pool.
For the testcases mentioned in commit 557ac0350d ("merge-ort: begin
performance work; instrument with trace2_region_* calls", 2020-10-28),
this change improves the performance as follows:
Before After
no-renames: 202.5 ms ± 3.2 ms 198.1 ms ± 2.6 ms
mega-renames: 1.072 s ± 0.012 s 715.8 ms ± 4.0 ms
just-one-mega: 357.3 ms ± 3.9 ms 276.8 ms ± 4.2 ms
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
merge-ort has a lot of data structures, and they all tend to be freed
together in clear_or_reinit_internal_opts(). Set up a memory pool to
allow us to make these allocations and deallocations faster. Future
commits will adjust various callers to make use of this memory pool.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the code more flexible so that it can handle both being run with or
without a memory pool by adding utility functions which will either call
xmalloc, xcalloc, xstrndup
or
mem_pool_alloc, mem_pool_calloc, mem_pool_strndup
depending on whether we have a non-NULL memory pool. A subsequent
commit will make use of these.
(We will actually be dropping these functions soon and just assuming we
always have a memory pool, but the flexibility was very useful during
development of merge-ort so I want to be able to restore it if needed.)
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Exact rename detection, via insert_file_table(), uses a hashmap to store
files by oid. Use a mem_pool for the hashmap entries so these can all be
allocated and deallocated together.
For the testcases mentioned in commit 557ac0350d ("merge-ort: begin
performance work; instrument with trace2_region_* calls", 2020-10-28),
this change improves the performance as follows:
Before After
no-renames: 204.2 ms ± 3.0 ms 202.5 ms ± 3.2 ms
mega-renames: 1.076 s ± 0.015 s 1.072 s ± 0.012 s
just-one-mega: 364.1 ms ± 7.0 ms 357.3 ms ± 3.9 ms
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to make it clearer that these three variables holding a
function refer to functions that will clear the strmap/strintmap/strset,
rename them to str{map,intmap,set}_clear_func().
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --renormalize option updates the EOL conversions for the tracked
files. However, the loop already ignores files marked with the
SKIP_WORKTREE bit, so it will continue to do so with a sparse index
because the sparse directory entries also have this bit set.
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since b243012 (refresh_index(): add flag to ignore SKIP_WORKTREE
entries, 2021-04-08), 'git add --refresh <path>' will output a warning
message when the path is outside the sparse-checkout definition. The
implementation of this warning happened in parallel with the
sparse-index work to add ensure_full_index() calls throughout the
codebase.
Update this loop to have the proper logic that checks to see if the
pathspec is outside the sparse-checkout definition. This avoids the need
to expand the sparse directory entry and determine if the path is
tracked, untracked, or ignored. We simply avoid updating the stat()
information because there isn't even an entry that matches the path!
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The add_pathspec_matches_against_index() focuses on matching a pathspec
to file entries in the index. This already works correctly for its only
use: checking if untracked files exist in the index.
The compatibility checks in t1092 already test that 'git add <dir>'
works for a directory outside of the sparse cone. That provides coverage
for removing this guard.
This finalizes our ability to run 'git add .' without expanding a sparse
index to a full one. This is evidenced by an update to t1092 and by
these performance numbers for p2000-sparse-operations.sh:
Test HEAD~1 HEAD
--------------------------------------------------------------------------------
2000.10: git add . (full-index-v3) 0.37(0.28+0.07) 0.36(0.27+0.06) -2.7%
2000.11: git add . (full-index-v4) 0.33(0.26+0.06) 0.32(0.28+0.05) -3.0%
2000.12: git add . (sparse-index-v3) 0.57(0.53+0.07) 0.06(0.06+0.07) -89.5%
2000.13: git add . (sparse-index-v4) 0.57(0.53+0.07) 0.05(0.03+0.09) -91.2%
While the ~90% improvement is shown by the test results, it is worth
noting that expanding the sparse index was adding overhead in previous
commits. Comparing to the full index case, we see the performance go
from 0.33s to 0.05s, an 85% improvement.
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Disable command_requires_full_index for 'git add'. This does not require
any additional removals of ensure_full_index(). The main reason is that
'git add' discovers changes based on the pathspec and the worktree
itself. These are then inserted into the index directly, and calls to
index_name_pos() or index_file_exists() already call expand_to_path() at
the appropriate time to support a sparse-index.
Add a test to check that 'git add -A' and 'git add <file>' does not
expand the index at all, as long as <file> is not within a sparse
directory. This does not help the global 'git add .' case.
We can measure the improvement using p2000-sparse-operations.sh with
these results:
Test HEAD~1 HEAD
------------------------------------------------------------------------------
2000.6: git add -A (full-index-v3) 0.35(0.30+0.05) 0.37(0.29+0.06) +5.7%
2000.7: git add -A (full-index-v4) 0.31(0.26+0.06) 0.33(0.27+0.06) +6.5%
2000.8: git add -A (sparse-index-v3) 0.57(0.53+0.07) 0.05(0.04+0.08) -91.2%
2000.9: git add -A (sparse-index-v4) 0.58(0.55+0.06) 0.05(0.05+0.06) -91.4%
While the 91% improvement seems impressive, it's important to recognize
that previously we had significant overhead for expanding the
sparse-index. Comparing to the full index case, 'git add -A' goes from
0.37s to 0.05s, which is "only" an 86% improvement.
This modification to 'git add' creates some behavior change depending on
the use of a sparse index. We modify a test in t1092 to demonstrate
these changes which will be remedied in future changes.
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Conflicts can occur outside of the sparse-checkout definition, and in
that case users might try to resolve the conflicts in several ways.
Document a few of these ways in a test. Make it clear that this behavior
is not necessarily the optimal flow, since users can become confused
when Git deletes these files from the worktree in later commands.
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"TEST_OUTPUT_DIRECTORY=there make test" failed to work, which has
been corrected.
* ps/t0000-output-directory-fix:
t0000: fix test if run with TEST_OUTPUT_DIRECTORY
The code that gives an error message in "git multi-pack-index" when
no subcommand is given tried to print a NULL pointer as a strong,
which has been corrected.
* tb/reverse-midx:
multi-pack-index: fix potential segfault without sub-command
The completion support used to offer alternate spelling of options
that exist only for compatibility, which has been corrected.
* pb/dont-complete-aliased-options:
parse-options: don't complete option aliases by default
Documentation on "git diff -l<n>" and diff.renameLimit have been
updated, and the defaults for these limits have been raised.
* en/rename-limits-doc:
rename: bump limit defaults yet again
diffcore-rename: treat a rename_limit of 0 as unlimited
doc: clarify documentation for rename/copy limits
diff: correct warning message when renameLimit exceeded
A guideline for gender neutral documentation has been added.
* ds/gender-neutral-doc-guidelines:
CodingGuidelines: recommend gender-neutral description
"git status" codepath learned to work with sparsely populated index
without hydrating it fully.
* ds/status-with-sparse-index:
t1092: document bad sparse-checkout behavior
fsmonitor: integrate with sparse index
wt-status: expand added sparse directory entries
status: use sparse-index throughout
status: skip sparse-checkout percentage with sparse-index
diff-lib: handle index diffs with sparse dirs
dir.c: accept a directory as part of cone-mode patterns
unpack-trees: unpack sparse directory entries
unpack-trees: rename unpack_nondirectories()
unpack-trees: compare sparse directories correctly
unpack-trees: preserve cache_bottom
t1092: add tests for status/add and sparse files
t1092: expand repository data shape
t1092: replace incorrect 'echo' with 'cat'
sparse-index: include EXTENDED flag when expanding
sparse-index: skip indexes with unmerged entries
