Just like "make -C <directory>", make "git -C <directory> ..." to
go there before doing anything else.
* nr/git-cd-to-a-directory:
t0056: "git -C" test updates
git: run in a directory given with -C option
"git mv A B" when moving a submodule A does "the right thing",
inclusing relocating its working tree and adjusting the paths in
the .gitmodules file.
* jl/submodule-mv: (53 commits)
rm: delete .gitmodules entry of submodules removed from the work tree
mv: update the path entry in .gitmodules for moved submodules
submodule.c: add .gitmodules staging helper functions
mv: move submodules using a gitfile
mv: move submodules together with their work trees
rm: do not set a variable twice without intermediate reading.
t6131 - skip tests if on case-insensitive file system
parse_pathspec: accept :(icase)path syntax
pathspec: support :(glob) syntax
pathspec: make --literal-pathspecs disable pathspec magic
pathspec: support :(literal) syntax for noglob pathspec
kill limit_pathspec_to_literal() as it's only used by parse_pathspec()
parse_pathspec: preserve prefix length via PATHSPEC_PREFIX_ORIGIN
parse_pathspec: make sure the prefix part is wildcard-free
rename field "raw" to "_raw" in struct pathspec
tree-diff: remove the use of pathspec's raw[] in follow-rename codepath
remove match_pathspec() in favor of match_pathspec_depth()
remove init_pathspec() in favor of parse_pathspec()
remove diff_tree_{setup,release}_paths
convert common_prefix() to use struct pathspec
...
This is similar in spirit to "make -C dir ..." and "tar -C dir ...".
It takes more keypresses to invoke git command in a different
directory without leaving the current directory:
1. (cd ~/foo && git status)
git --git-dir=~/foo/.git --work-dir=~/foo status
GIT_DIR=~/foo/.git GIT_WORK_TREE=~/foo git status
2. (cd ../..; git grep foo)
3. for d in d1 d2 d3; do (cd $d && git svn rebase); done
The methods shown above are acceptable for scripting but are too
cumbersome for quick command line invocations.
With this new option, the above can be done with fewer keystrokes:
1. git -C ~/foo status
2. git -C ../.. grep foo
3. for d in d1 d2 d3; do git -C $d svn rebase; done
A new test script is added to verify the behavior of this option with
other path-related options like --git-dir and --work-tree.
Signed-off-by: Nazri Ramliy <ayiehere@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Back when the core tutorial was written, `log` and `whatchanged`
were scripted Porcelains. In the "Inspecting Changes" section that
talks about the plumbing commands in the diff family, it made sense
to use `log` and `whatchanged` as good examples of the use of these
plumbing commands, and because even these scripted Porcelains were
novelty (there wasn't the new end-user tutorial written), it made
some sense to illustrate uses of the `git log` (and `git
whatchanged`) scripted Porcelain commands.
But we no longer have scripted `log` and `whatchanged` to serve as
examples, and this document is not where the end users learn what
`git log` command is about. Stop at briefly mentioning the
possibility of combining rev-list with diff-tree to build your own
log, and leave the end-user documentation of `log` to the new
tutorial and the user manual.
Also resurrect the last version of `git-log`, `git-whatchanged`, and
`git-show` to serve as examples to contrib/examples/ directory.
While at it, remove 'whatchanged' from a list of sample commands
that are affected by GIT_FLUSH environment variable. This is not
meant to be an exhaustive list but as a list of typical ones, and an
old command that is kept primarily for backward compatibility does
not belong to it.
Helped-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
:(glob)path differs from plain pathspec that it uses wildmatch with
WM_PATHNAME while the other uses fnmatch without FNM_PATHNAME. The
difference lies in how '*' (and '**') is processed.
With the introduction of :(glob) and :(literal) and their global
options --[no]glob-pathspecs, the user can:
- make everything literal by default via --noglob-pathspecs
--literal-pathspecs cannot be used for this purpose as it
disables _all_ pathspec magic.
- individually turn on globbing with :(glob)
- make everything globbing by default via --glob-pathspecs
- individually turn off globbing with :(literal)
The implication behind this is, there is no way to gain the default
matching behavior (i.e. fnmatch without FNM_PATHNAME). You either get
new globbing or literal. The old fnmatch behavior is considered
deprecated and discouraged to use.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
--literal-pathspecs and its equivalent environment variable are
probably used for scripting. In that setting, pathspec magic may be
unwanted. Disabling globbing in individual pathspec can be done via
:(literal) magic.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The set_reflog_action helper (in git-sh-setup) is designed to be
used once at the very top of a program, like this in "git am", for
example:
set_reflog_action am
The helper function sets the given string to GIT_REFLOG_ACTION only
when GIT_REFLOG_ACTION is not yet set. Thanks to this, "git am",
when run as the top-level program, will use "am" in GIT_REFLOG_ACTION
and the reflog entries made by whatever it does will record the
updates of refs done by "am".
Because of the conditional assignment, when "git am" is run as a
subprogram (i.e. an implementation detail) of "git rebase" that
already sets GIT_REFLOG_ACTION to its own name, the call in "git am"
to the helper function at the beginning will *not* have any effect.
So "git rebase" can do this:
set_reflog_action rebase
... do its own preparation, like checking out "onto" commit
... decide to do "format-patch" to "am" pipeline
git format-patch --stdout >mbox
git am mbox
and the reflog entries made inside "git am" invocation will say
"rebase", not "am".
Calls to "git" commands that update refs would use GIT_REFLOG_ACTION
to record who did that update. Most such calls in scripted Porcelains
do not define custom reflog message and rely on GIT_REFLOG_ACTION to
contain its (or its caller's, when it is called as a subprogram) name.
If a scripted Porcelain wants to record a custom reflog message for
a single invocation of "git" command (e.g. when "git rebase" uses
"git checkout" to detach HEAD at the commit a series is to be
replayed on), it needs to set GIT_REFLOG_ACTION to the custom
message and export it while calling the "git" command, but such an
assignment must be restricted to that single "git" invocation and
should not be left behind to affect later codepath.
Document the rules to avoid future confusion.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These days, "git --work-tree=there cmd" without specifying an
explicit --git-dir=here will do the usual discovery, but we had a
description of older behaviour in the documentation.
* cr/git-work-tree-sans-git-dir:
git.txt: remove stale comment regarding GIT_WORK_TREE
Primarily to push out two regression issues that seem to affect many
people, namely, the ".gitignore !directory" bug and "daemon cannot
read from $HOME owned by root" bug.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"This can help with debugging object negotiation or other protocol
issues."
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
5f44324 (core: log offset pack data accesses happened - 2011-07-06)
provides a way to observe pack access patterns via a config
switch. Setting an environment variable looks more obvious than a
config var, especially when you just need to _observe_, and more
inline with other tracing knobs we have.
Document it as it may be useful for remote troubleshooting.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Official support for specifying --work-tree/GIT_WORK_TREE without
--git-dir/GIT_DIR was added with v1.7.4-rc3~2^2~2. Update description
of GIT_WORK_TREE to reflect this.
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Enhance "check-ignore" (1.8.2 update) to work more like "check-attr"
over bidi-pipes.
* as/check-ignore:
t0008: use named pipe (FIFO) to test check-ignore streaming
Documentation: add caveats about I/O buffering for check-{attr,ignore}
check-ignore: allow incremental streaming of queries via --stdin
check-ignore: move setup into cmd_check_ignore()
check-ignore: add -n / --non-matching option
t0008: remove duplicated test fixture data
Use "SHA-1" instead of "SHA1" whenever we talk about the hash function.
When used as a programming symbol, we keep "SHA1".
Signed-off-by: Thomas Ackermann <th.acker@arcor.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
check-attr and check-ignore have the potential to deadlock callers
which do not read back the output in real-time. For example, if a
caller writes N paths out and then reads N lines back in, it risks
becoming blocked on write() to check-*, and check-* is blocked on
write back to the caller. Somebody has to buffer; the pipe buffers
provide some leeway, but they are limited.
Thanks to Peff for pointing this out:
http://article.gmane.org/gmane.comp.version-control.git/220534
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In particular, it can get called with four arguments if you happen to
be referring to a repo using the ssh:// scheme with a non-default port
number.
Signed-off-by: Dan Bornstein <danfuzz@milk.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An earlier workaround designed to help people who list logical
directories that will not match what getcwd(3) returns in the
GIT_CEILING_DIRECTORIES had an adverse effect when it is slow to
stat and readlink a directory component of an element listed on it.
* mh/maint-ceil-absolute:
Provide a mechanism to turn off symlink resolution in ceiling paths
Commit 1b77d83cab 'setup_git_directory_gently_1(): resolve symlinks
in ceiling paths' changed the setup code to resolve symlinks in the
entries in GIT_CEILING_DIRECTORIES. Because those entries are
compared textually to the symlink-resolved current directory, an
entry in GIT_CEILING_DIRECTORIES that contained a symlink would have
no effect. It was known that this could cause performance problems
if the symlink resolution *itself* touched slow filesystems, but it
was thought that such use cases would be unlikely. The intention of
the earlier change was to deal with a case when the user has this:
GIT_CEILING_DIRECTORIES=/home/gitster
but in reality, /home/gitster is a symbolic link to somewhere else,
e.g. /net/machine/home4/gitster. A textual comparison between the
specified value /home/gitster and the location getcwd(3) returns
would not help us, but readlink("/home/gitster") would still be
fast.
After this change was released, Anders Kaseorg <andersk@mit.edu>
reported:
> [...] my computer has been acting so slow when I’m not connected to
> the network. I put various network filesystem paths in
> $GIT_CEILING_DIRECTORIES, such as
> /afs/athena.mit.edu/user/a/n/andersk (to avoid hitting its parents
> /afs/athena.mit.edu, /afs/athena.mit.edu/user/a, and
> /afs/athena.mit.edu/user/a/n which all live in different AFS
> volumes). Now when I’m not connected to the network, every
> invocation of Git, including the __git_ps1 in my shell prompt, waits
> for AFS to timeout.
To allow users to work around this problem, give them a mechanism to
turn off symlink resolution in GIT_CEILING_DIRECTORIES entries. All
the entries that follow an empty entry will not be checked for symbolic
links and used literally in comparison. E.g. with these:
GIT_CEILING_DIRECTORIES=:/foo/bar:/xyzzy or
GIT_CEILING_DIRECTORIES=/foo/bar::/xyzzy
we will not readlink("/xyzzy") because it comes after an empty entry.
With the former (but not with the latter), "/foo/bar" comes after an
empty entry, and we will not readlink it, either.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The old Git version where it appeared is now useful only to historians,
not to normal users. Also, the text was mentioning only the per-repo
config file, but this is a good place to teach that customization can
also be made per-user.
While at it, remove a now-defunct e-mail from an example.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the earlier days, we used to spell the name of the system as GIT,
to simulate as if it were typeset with capital G and IT in small
caps. Later we stopped doing so at around 1.6.5 days.
Let's stop doing so throughout the documentation. The name to refer
to the whole system (and the concept it embodies) is "Git"; the
command end-users type is "git". And document this in the coding
guideline.
Signed-off-by: Thomas Ackermann <th.acker@arcor.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When attempting to read the XDG-style $HOME/.config/git/config and
finding that $HOME/.config/git is a file, we gave a wrong error
message, instead of treating the case as "a custom config file does
not exist there" and moving on.
* jn/warn-on-inaccessible-loosen:
config: exit on error accessing any config file
doc: advertise GIT_CONFIG_NOSYSTEM
config: treat user and xdg config permission problems as errors
config, gitignore: failure to access with ENOTDIR is ok
Deal with a situation where .config/git is a file and we notice
.config/git/config is not readable due to ENOTDIR, not ENOENT.
* jn/warn-on-inaccessible-loosen:
config: exit on error accessing any config file
doc: advertise GIT_CONFIG_NOSYSTEM
config: treat user and xdg config permission problems as errors
config, gitignore: failure to access with ENOTDIR is ok
Allow scripts to feed literal paths to commands that take
pathspecs, by disabling wildcard globbing.
* jk/pathspec-literal:
add global --literal-pathspecs option
Conflicts:
dir.c
We earlier removed a link to list of contributors that pointed to a
defunct page; let's use a working one from Ohloh.net to replace it
instead.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git takes pathspec arguments in many places to limit the
scope of an operation. These pathspecs are treated not as
literal paths, but as glob patterns that can be fed to
fnmatch. When a user is giving a specific pattern, this is a
nice feature.
However, when programatically providing pathspecs, it can be
a nuisance. For example, to find the latest revision which
modified "$foo", one can use "git rev-list -- $foo". But if
"$foo" contains glob characters (e.g., "f*"), it will
erroneously match more entries than desired. The caller
needs to quote the characters in $foo, and even then, the
results may not be exactly the same as with a literal
pathspec. For instance, the depth checks in
match_pathspec_depth do not kick in if we match via fnmatch.
This patch introduces a global command-line option (i.e.,
one for "git" itself, not for specific commands) to turn
this behavior off. It also has a matching environment
variable, which can make it easier if you are a script or
porcelain interface that is going to issue many such
commands.
This option cannot turn off globbing for particular
pathspecs. That could eventually be done with a ":(noglob)"
magic pathspec prefix. However, that level of granularity is
more cumbersome to use for many cases, and doing ":(noglob)"
right would mean converting the whole codebase to use
"struct pathspec", as the usual "const char **pathspec"
cannot represent extra per-item flags.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unlike other environment variables (e.g. GIT_WORK_TREE, GIT_NAMESPACE),
the Documentation/git.txt file did not mention that the GIT_DIR
environment variable can also be set using the --git-dir command line
option.
Signed-off-by: Manlio Perillo <manlio.perillo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We earlier removed a link to list of contributors that pointed to a
defunct page; let's use a working one from Ohloh.net to replace it
instead.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The linked page has not been showing the promised "more complete
list" for more than 6 months by now, and nobody has resurrected
the list there nor elsewhere since then.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On a multiuser system where mortals do not have write access to /etc,
the GIT_CONFIG_NOSYSTEM variable is the best tool we have to keep
getting work done when a syntax error or other problem renders
/etc/gitconfig buggy, until the sysadmin sorts the problem out.
Noticed while experimenting with teaching git to error out when
/etc/gitconfig is unreadable.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The second paragraph in the git(1) description section were meant to
guide people who are not ready to dive into this page away from here.
Referring migrating CVS users to another page before they get
acquainted with Git was somewhat out of place. Move the reference to
the "FURTHER DOCUMENTATION" section and push that section down.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The one at kernel.org has not been updated for quite a while and
can no longer be called "the latest".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously GIT_EDITOR was not listed in git(1) "Environment Variables" section,
which could be very confusing to users. Include it in "other" subsection along
with a link to git-var(1), since that is the page that fully describes all
places where editor can be set and also their preference order.
Also, git-var(1) did not say that hardcoded fallback 'vi' may have been changed
at build time. A user could be puzzled if 'nano' pops up even when none of the
mentioned environment vars or config.editor are set. Clarify this.
Ideally, the build system should be changed to reflect the chosen fallback
editor when creating the man pages. Not sure if that is even possible though.
Signed-off-by: Rodrigo Silva (MestreLion) <linux@rodrigosilva.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The line was extended in 2dd8c3 ('git: add --info-path and --man-path
options'), and the formatted man output stopped fitting into the 80
column window.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint-1.7.7:
Git 1.7.7.5
Git 1.7.6.5
blame: don't overflow time buffer
fetch: create status table using strbuf
checkout,merge: loosen overwriting untracked file check based on info/exclude
cast variable in call to free() in builtin/diff.c and submodule.c
apply: get rid of useless x < 0 comparison on a size_t type
Conflicts:
Documentation/git.txt
GIT-VERSION-GEN
RelNotes
builtin/fetch.c
* nk/ref-doc:
glossary: clarify description of HEAD
glossary: update description of head and ref
glossary: update description of "tag"
git.txt: de-emphasize the implementation detail of a ref
check-ref-format doc: de-emphasize the implementation detail of a ref
git-remote.txt: avoid sounding as if loose refs are the only ones in the world
git-remote.txt: fix wrong remote refspec
* nk/ref-doc:
glossary: clarify description of HEAD
glossary: update description of head and ref
glossary: update description of "tag"
git.txt: de-emphasize the implementation detail of a ref
check-ref-format doc: de-emphasize the implementation detail of a ref
git-remote.txt: avoid sounding as if loose refs are the only ones in the world
git-remote.txt: fix wrong remote refspec
Document the namespace mechanism in a new gitnamespaces(7) page.
Reference it from receive-pack and upload-pack.
Document the new --namespace option and GIT_NAMESPACE environment
variable in git(1), and reference gitnamespaces(7).
Add a sample Apache configuration to http-backend(1) to support
namespaced repositories, and reference gitnamespaces(7).
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is an unimportant implementation detail that branches and tags are
stored somewhere under $GIT_DIR/refs directory, or the name of the commit
that will become the parent of the next commit is stored in $GIT_DIR/HEAD.
What is more important is that branches live in refs/heads and tags live
in refs/tags hierarchy in the ref namespace, and HEAD means the tip of the
current branch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/info-man-path:
Documentation: clarify meaning of --html-path, --man-path, and --info-path
git: add --info-path and --man-path options
Conflicts:
Makefile
These options tell UI programs where git put its documentation, so
"Help" actions can show the documentation for *this* version of git
without regard to how MANPATH and INFOPATH are set up. Details:
. Each variable tells where documentation is expected to be. They do
not indicate whether documentation was actually installed.
. The output of "git --html-path" is an absolute path and can be used
in "file://$(git --html-path)/git-add.html" to name the HTML file
documenting a particular command.
. --man-path names a manual page hierarchy (e.g.,
/home/user/share/man). Its output can be passed to "man -M" or put
at the beginning of $MANPATH.
. --info-path names a directory with info files (e.g.,
/home/user/share/info). Its output is suitable as an argument to
"info -d" or for inclusion in $INFOPATH.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Similar to the way the --html-path option lets UI programs learn where git
has its HTML documentation pages, expose the other two paths used to store
the documentation pages of these two types.
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove a spurious empty line which prevented asciidoc from recognizing a
list continuation mark ('+'), so that it does not get output literally any
more.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As 1.7.4.3 has backmerged a handful of fixes from the master,
drop these entries from 1.7.5 release notes.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is a nice shortlog-ish output of the authors there. We
also point people directly to shortlog, but of course they
might be reading the documentation online or from a binary
package of git.
The point of these sections is generally to:
1. Give credit where it is due.
2. Give the reader an idea of where to ask questions or
file bug reports.
But they don't do a good job of either case. For (1), they
are out of date and incomplete. A much more accurate answer
can be gotten through shortlog or blame. For (2), the
correct contact point is generally git@vger, and even if you
wanted to cc the contact point, the out-of-date and
incomplete fields mean you're likely sending to somebody
useless.
So let's drop the fields entirely from all manpages except
git(1) itself. We already point people to the mailing list
for bug reports there, and we can update the Authors section
to give credit to the major contributors and point to
shortlog and blame for more information.
Each page has a "This is part of git" footer, so people can
follow that to the main git manpage.
* nd/setup: (47 commits)
setup_work_tree: adjust relative $GIT_WORK_TREE after moving cwd
git.txt: correct where --work-tree path is relative to
Revert "Documentation: always respect core.worktree if set"
t0001: test git init when run via an alias
Remove all logic from get_git_work_tree()
setup: rework setup_explicit_git_dir()
setup: clean up setup_discovered_git_dir()
t1020-subdirectory: test alias expansion in a subdirectory
setup: clean up setup_bare_git_dir()
setup: limit get_git_work_tree()'s to explicit setup case only
Use git_config_early() instead of git_config() during repo setup
Add git_config_early()
git-rev-parse.txt: clarify --git-dir
t1510: setup case #31
t1510: setup case #30
t1510: setup case #29
t1510: setup case #28
t1510: setup case #27
t1510: setup case #26
t1510: setup case #25
...
* sn/doc-opt-notation:
Fix {update,checkout}-index usage strings
Put a space between `<' and argument in pack-objects usage string
Remove stray quotes in --pretty and --format documentation
Use parentheses and `...' where appropriate
Fix odd markup in --diff-filter documentation
Use angles for placeholders consistently
Fix references to gitrevisions(1) in the manual pages and HTML
documentation.
In practice, this will not matter much unless someone tries to use a
hard copy of the git reference manual.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* kf/askpass-config:
Extend documentation of core.askpass and GIT_ASKPASS.
Allow core.askpass to override SSH_ASKPASS.
Add a new option 'core.askpass'.
There are 108 of them already. That's a bit more than one third of
all the files in the Documentation directory already, and still growing.
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, whenever we need documentation for revisions and ranges, we
link to the git-rev-parse man page, i.e. a plumbing man page, which has
this along with the documentation of all rev-parse modes.
Link to the new gitrevisions man page instead in all cases except
- when the actual git-rev-parse command is referred to or
- in very technical context (git-send-pack).
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'ld/discovery-limit-to-fs' (early part):
Rename ONE_FILESYSTEM to DISCOVERY_ACROSS_FILESYSTEM
GIT_ONE_FILESYSTEM: flip the default to stop at filesystem boundaries
Add support for GIT_ONE_FILESYSTEM
truncate cwd string before printing error message
config.c: remove static keyword from git_env_bool()
* ar/config-from-command-line:
Complete prototype of git_config_from_parameters()
Use strbufs instead of open-coded string manipulation
Allow passing of configuration parameters in the command line
If a missing ONE_FILESYSTEM defaults to true, the only users who set this
variable set it to false to tell git not to limit the discovery to one
filesystem; there are too many negations in one sentence to make a simple
panda brain dizzy.
Use the variable GIT_DISCOVERY_ACROSS_FILESYSTEM that changes the
behaviour from the default "limit to one filesystem" to "cross the
boundary as I ask you to"; makes the semantics much more straight
forward.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Regarding the new environment variable, Linus Torvalds
<torvalds@linux-foundation.org> writes on Tue, 30 Mar 2010 in
<alpine.LFD.2.00.1003301537150.3707@i5.linux-foundation.org>:
I suspect that it is _very_ unusual to have a source repo that crosses
multiple filesystems, and the original reason for this patch-series
seems to me to be likely to be more common than that multi-fs case. So
having the logic go the other way would seem to match the common case,
no?
The "crossing filesystem boundary" condition is checked by comparing
st_dev field in the result from stat(2). This is slightly worrysome if
non-POSIX ports return different values in the field even for directories
in the same work tree extracted to the same "filesystem". Erik Faye-Lund
confirms that in the msysgit port st_dev is 0, so this should be safe, as
"even Windows is safe" ;-)
This will affect those who use /.git to cram /etc and /home/me in the same
repostiory, /home is mounted from non-root filesystem, and a git operation
is done from inside /home/me/src. But that is such a corner case we don't
want to give preference over helping people who will benefit from having
this default so that they do not have to suffer from slow automounters.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The values passed this way will override whatever is defined
in the config files.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch makes git pay attention to the GIT_ONE_FILESYSTEM environment
variable. When that variable is set, git will stop searching for a
GIT_DIR when it attempts to cross a filesystem boundary.
When working in an environment with too many automount points to make
maintaining a GIT_CEILING_DIRECTORIES list enjoyable, GIT_ONE_FILESYSTEM
gives the option of turning all such attempts off with one setting.
Signed-off-by: Lars R. Damerow <lars@pixar.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/maint-fix-pager:
tests: Fix race condition in t7006-pager
t7006-pager: if stdout is not a terminal, make a new one
tests: Add tests for automatic use of pager
am: Fix launching of pager
git svn: Fix launching of pager
git.1: Clarify the behavior of the --paginate option
Make 'git var GIT_PAGER' always print the configured pager
Fix 'git var' usage synopsis
The --paginate option is meant to negate the effect of an explicit or
implicit pager.<cmd> = false setting. Thus it turns the pager on if
output is going to a terminal rather than unconditionally.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* remotes/trast-doc/for-next:
Documentation: spell 'git cmd' without dash throughout
Documentation: format full commands in typewriter font
Documentation: warn prominently against merging with dirty trees
Documentation/git-merge: reword references to "remote" and "pull"
Conflicts:
Documentation/config.txt
Documentation/git-config.txt
Documentation/git-merge.txt
* maint-1.6.5:
Git 1.6.5.8
Fix mis-backport of t7002
bash completion: factor submodules into dirty state
reset: unbreak hard resets with GIT_WORK_TREE
Conflicts:
Documentation/git.txt
GIT-VERSION-GEN
RelNotes
The documentation was quite inconsistent when spelling 'git cmd' if it
only refers to the program, not to some specific invocation syntax:
both 'git-cmd' and 'git cmd' spellings exist.
The current trend goes towards dashless forms, and there is precedent
in 647ac70 (git-svn.txt: stop using dash-form of commands.,
2009-07-07) to actively eliminate the dashed variants.
Replace 'git-cmd' with 'git cmd' throughout, except where git-shell,
git-cvsserver, git-upload-pack, git-receive-pack, and
git-upload-archive are concerned, because those really live in the
$PATH.
* maint:
Git 1.6.5.7
worktree: don't segfault with an absolute pathspec without a work tree
ignore unknown color configuration
help.autocorrect: do not run a command if the command given is junk
Illustrate "filter" attribute with an example
Commit dae556b (environment: add global variable to disable replacement)
adds a variable to enable/disable replacement, and it is enabled by
default for most commands.
So there is no way to disable it for some commands, which is annoying
when we want to get information about a commit that has been replaced.
For example:
$ git cat-file -p N
would output information about the replacement commit if commit N is
replaced.
With the "--no-replace-objects" option that this patch adds it is
possible to get information about the original commit using:
$ git --no-replace-objects cat-file -p N
While at it, let's add some documentation about this new option in the
"git replace" man page too.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint-1.6.3:
Change mentions of "git programs" to "git commands"
Documentation: merge: one <remote> is required
help.c: give correct structure's size to memset()
Most of the docs and printouts refer to "commands" when discussing what
the end users call via the "git" top-level program. We should refer them
as "git programs" when we discuss the fact that the commands are
implemented as separate programs, but in other contexts, it is better to
use the term "git commands" consistently.
Signed-off-by: Ori Avtalion <ori@avtalion.name>
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add references to the gitworkflows(7) manpage added in f948dd8
(Documentation: add manpage about workflows, 2008-10-19) to both
gittutorial(1) and git(1), so that new users might actually discover
and read it.
Noticed by Randal L. Schwartz.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These links inside "stalenotes" section need to be updated on the master
branch every time a new stable or maintenance release is made.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This can be used in GUIs to open installed HTML documentation in the
browser.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
