Move the interface declaration for the functions in lockfile.c from
cache.h to a new file, lockfile.h. Add #includes where necessary (and
remove some redundant includes of cache.h by files that already
include builtin.h).
Move the documentation of the lock_file state diagram from lockfile.c
to the new header file.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is inside an "else" block of "if (last - first < 1)", so we know
that "last - first >= 1" when we come here. No need to check
"last - first > 0".
While at there, save "argc + last - first" to a variable to shorten
the statements a bit.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An experiment to use two files (the base file and incremental
changes relative to it) to represent the index to reduce I/O cost
of rewriting a large index when only small part of the working tree
changes.
* nd/split-index: (32 commits)
t1700: new tests for split-index mode
t2104: make sure split index mode is off for the version test
read-cache: force split index mode with GIT_TEST_SPLIT_INDEX
read-tree: note about dropping split-index mode or index version
read-tree: force split-index mode off on --index-output
rev-parse: add --shared-index-path to get shared index path
update-index --split-index: do not split if $GIT_DIR is read only
update-index: new options to enable/disable split index mode
split-index: strip pathname of on-disk replaced entries
split-index: do not invalidate cache-tree at read time
split-index: the reading part
split-index: the writing part
read-cache: mark updated entries for split index
read-cache: save deleted entries in split index
read-cache: mark new entries for split index
read-cache: split-index mode
read-cache: save index SHA-1 after reading
entry.c: update cache_changed if refresh_cache is set in checkout_entry()
cache-tree: mark istate->cache_changed on prime_cache_tree()
cache-tree: mark istate->cache_changed on cache tree update
...
On a case insensitive filesystem, merge-recursive incorrectly
deleted the file that is to be renamed to a name that is the same
except for case differences.
* dt/merge-recursive-case-insensitive:
mv: allow renaming to fix case on case insensitive filesystems
merge-recursive.c: fix case-changing merge bug
"git mv hello.txt Hello.txt" on a case insensitive filesystem
always triggers "destination already exists" error, because these
two names refer to the same path from the filesystem's point of
view, and requires the user to give "--force" when correcting the
case of the path recorded in the index and in the next commit.
Detect this case and allow it without requiring "--force".
Signed-off-by: David Turner <dturner@twitter.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git mv" that moves a submodule forgot to adjust the array that uses
to keep track of which submodules were to be moved to update its
configuration.
* jk/mv-submodules-fix:
mv: prevent mismatched data when ignoring errors.
builtin/mv: fix out of bounds write
We shrink the source and destination arrays, but not the modes or
submodule_gitfile arrays, resulting in potentially mismatched data. Shrink
all the arrays at the same time to prevent this. Add tests to ensure the
problem does not recur.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When commit a88c915 (mv: move submodules using a gitfile, 2013-07-30)
added the submodule_gitfile array, it was not added to the block that
enlarges the arrays when we are moving a directory so that we do not
have to worry about it being a directory when we perform the actual
move. After this, the loop continues over the enlarged set of sources.
Since we assume that submodule_gitfile has size argc, if any of the
items in the source directory are submodules we are guaranteed to write
beyond the end of submodule_gitfile.
Fix this by realloc'ing submodule_gitfile at the same time as the other
arrays.
Reported-by: Guillaume Gelin <contact@ramnes.eu>
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If 'src' already ends with a slash, then add_slash() will just return
it, meaning that 'free(src_with_slash)' is actually 'free(src)'. Since
we use 'src' later, this will result in use-after-free.
In fact, this cannot happen because 'src' comes from
internal_copy_pathspec() without the KEEP_TRAILING_SLASH flag, so any
trailing '/' will have been stripped; but static analysis tools are not
clever enough to realise this and so warn that 'src' could be used after
having been free'd. Fix this by checking that 'src_w_slash' is indeed
newly allocated memory.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous commit c57f628 (mv: let 'git mv file no-such-dir/' error out)
relies on that rename("file", "no-such-dir/") fails if the directory does not
exist (note the trailing slash). This does not work as expected on Windows:
This rename() call does not fail, but renames "file" to "no-such-dir" (not to
"no-such-dir/file"). Insert an explicit check for this case to force an error.
This changes the error message from
$ git mv file no-such-dir/
fatal: renaming 'file' failed: Not a directory
to
$ git mv file no-such-dir/
fatal: destination directory does not exist, source=file, destination=no-such-dir/
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git used to trim the trailing slash, and make the command equivalent
to 'git mv file no-such-dir', which created the file no-such-dir
(while the trailing slash explicitly stated that it could only be a
directory).
This patch skips the trailing slash removal for the destination
path. The path with its trailing slash is passed to rename(2),
which errors out with the appropriate message:
$ git mv file no-such-dir/
fatal: renaming 'file' failed: Not a directory
Original-patch-by: Duy Nguyen <pclouds@gmail.com>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In commit 0656781fa "git mv" learned to update the submodule path in the
.gitmodules file when moving a submodule in the work tree. But since that
commit update_path_in_gitmodules() gets called no matter if we moved a
submodule or a regular file, which is wrong and leads to a bogus warning
when moving a regular file in a repo containing a .gitmodules file:
warning: Could not find section in .gitmodules where path=<filename>
Fix that by only calling update_path_in_gitmodules() when moving a
submodule. To achieve that, we introduce the special SUBMODULE_WITH_GITDIR
define to distinguish the cases where we also have to connect work tree
and git directory from those where we only need to update the .gitmodules
setting.
A test for submodules using a .git directory together with a .gitmodules
file has been added to t7001. Even though newer git versions will always
use a gitfile when cloning submodules, repositories cloned with older git
versions will still use this layout.
Reported-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
"git mv A B" when moving a submodule A does "the right thing",
inclusing relocating its working tree and adjusting the paths in
the .gitmodules file.
* jl/submodule-mv: (53 commits)
rm: delete .gitmodules entry of submodules removed from the work tree
mv: update the path entry in .gitmodules for moved submodules
submodule.c: add .gitmodules staging helper functions
mv: move submodules using a gitfile
mv: move submodules together with their work trees
rm: do not set a variable twice without intermediate reading.
t6131 - skip tests if on case-insensitive file system
parse_pathspec: accept :(icase)path syntax
pathspec: support :(glob) syntax
pathspec: make --literal-pathspecs disable pathspec magic
pathspec: support :(literal) syntax for noglob pathspec
kill limit_pathspec_to_literal() as it's only used by parse_pathspec()
parse_pathspec: preserve prefix length via PATHSPEC_PREFIX_ORIGIN
parse_pathspec: make sure the prefix part is wildcard-free
rename field "raw" to "_raw" in struct pathspec
tree-diff: remove the use of pathspec's raw[] in follow-rename codepath
remove match_pathspec() in favor of match_pathspec_depth()
remove init_pathspec() in favor of parse_pathspec()
remove diff_tree_{setup,release}_paths
convert common_prefix() to use struct pathspec
...
Currently using "git mv" on a submodule moves the submodule's work tree in
that of the superproject. But the submodule's path setting in .gitmodules
is left untouched, which is now inconsistent with the work tree and makes
git commands that rely on the proper path -> name mapping (like status and
diff) behave strangely.
Let "git mv" help here by not only moving the submodule's work tree but
also updating the "submodule.<submodule name>.path" setting from the
.gitmodules file and stage both. This doesn't happen when no .gitmodules
file is found and only issues a warning when it doesn't have a section for
this submodule. This is because the user might just use plain gitlinks
without the .gitmodules file or has already updated the path setting by
hand before issuing the "git mv" command (in which case the warning
reminds him that mv would have done that for him). Only when .gitmodules
is found and contains merge conflicts the mv command will fail and tell
the user to resolve the conflict before trying again.
Also extend the man page to inform the user about this new feature.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This task emerged from b04ba2bb (parse-options: deprecate OPT_BOOLEAN,
2011-09-27). All occurrences of the respective variables have
been reviewed and none of them relied on the counting up mechanism,
but all of them were using the variable as a true boolean.
This patch does not change semantics of any command intentionally.
Signed-off-by: Stefan Beller <stefanbeller@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When moving a submodule which uses a gitfile to point to the git directory
stored in .git/modules/<name> of the superproject two changes must be made
to make the submodule work: the .git file and the core.worktree setting
must be adjusted to point from work tree to git directory and back.
Achieve that by remembering which submodule uses a gitfile by storing the
result of read_gitfile() of each submodule. If that is not NULL the new
function connect_work_tree_and_git_dir() is called after renaming the
submodule's work tree which updates the two settings to the new values.
Extend the man page to inform the user about that feature (and while at it
change the description to not talk about a script anymore, as mv is a
builtin for quite some time now).
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently the attempt to use "git mv" on a submodule errors out with:
fatal: source directory is empty, source=<src>, destination=<dest>
The reason is that mv searches for the submodule with a trailing slash in
the index, which it doesn't find (because it is stored without a trailing
slash). As it doesn't find any index entries inside the submodule it
claims the directory would be empty even though it isn't.
Fix that by searching for the name without a trailing slash and continue
if it is a submodule. Then rename() will move the submodule work tree just
like it moves a file.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because free_pathspec wants to free "items" pointer in the pathspec
structure, a simple structure assignment is not enough if you want to
copy an existing pathspec into another. Freeing the original will
damage the copy unless a deep copy is made.
Note that the strings in pathspec->items->match and the array
pathspec->raw[] are still shared between the original and the copy.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/maint-mv:
mv: be quiet about overwriting
mv: improve overwrite warning
mv: make non-directory destination error more clear
mv: honor --verbose flag
docs: mention "-k" for both forms of "git mv"
When a user asks us to force a mv and overwrite the
destination, we print a warning. However, since a typical
use would be:
$ git mv one two
fatal: destination exists, source=one, destination=two
$ git mv -f one two
warning: overwriting 'two'
this warning is just noise. We already know we're
overwriting; that's why we gave -f!
This patch silences the warning unless "--verbose" is given.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we try to "git mv" over an existing file, the error
message is fairly informative:
$ git mv one two
fatal: destination exists, source=one, destination=two
When the user forces the overwrite, we give a warning:
$ git mv -f one two
warning: destination exists; will overwrite!
This is less informative, but still sufficient in the simple
rename case, as there is only one rename happening.
But when moving files from one directory to another, it
becomes useless:
$ mkdir three
$ touch one two three/one
$ git add .
$ git mv one two three
fatal: destination exists, source=one, destination=three/one
$ git mv -f one two three
warning: destination exists; will overwrite!
The first message is helpful, but the second one gives us no
clue about what was overwritten. Let's mention the name of
the destination file:
$ git mv -f one two three
warning: overwriting 'three/one'
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you try to "git mv" multiple files onto another
non-directory file, you confusingly get the "usage" message:
$ touch one two three
$ git add .
$ git mv one two three
usage: git mv [options] <source>... <destination>
[...]
From the user's perspective, that makes no sense. They just
gave parameters that exactly match that usage!
This behavior dates back to the original C version of "git
mv", which had a usage message like:
usage: git mv (<source> <destination> | <source>... <destination>)
This was slightly less confusing, because it at least
mentions that there are two ways to invoke (but it still
isn't clear why what the user provided doesn't work).
Instead, let's show an error message like:
$ git mv one two three
fatal: destination 'three' is not a directory
We could leave the usage message in place, too, but it
doesn't actually help here. It contains no hints that there
are two forms, nor that multi-file form requires that the
endpoint be a directory. So it just becomes useless noise
that distracts from the real error.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code for a verbose flag has been here since "git mv" was
converted to C many years ago, but actually getting the "-v"
flag from the command line was accidentally lost in the
transition.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "it" string would not be free'ed if base_name was non-NULL.
Let's free it.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "x"-prefixed versions of strdup, malloc, etc. will check whether the
allocation was successful and terminate the process otherwise.
A few uses of malloc were left alone since they already implemented a
graceful path of failure or were in a quasi external library like xdiff.
Additionally, the call to malloc in compat/win32/syslog.c was not modified
since the syslog() implemented there is a die handler and a call to the
x-wrappers within a die handler could result in recursion should memory
allocation fail. This will have to be addressed separately.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize messages made by assigning to the "bad" char* variable.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add OPT__FORCE as a helper macro in the same spirit as OPT__VERBOSE
et.al. to simplify defining -f/--force options.
Signed-off-by: Rene Scharfe <rene.scharfe@lstfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allows better help text to be defined than "dry run". Also make use
of the macro in places that already had a different description. No
object code changes intended.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the definition and callers of string_list_insert to use the
string_list as the first argument. This helps make the string_list
API easier to use by being more consistent.
Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This shrinks the top-level directory a bit, and makes it much more
pleasant to use auto-completion on the thing. Instead of
[torvalds@nehalem git]$ em buil<tab>
Display all 180 possibilities? (y or n)
[torvalds@nehalem git]$ em builtin-sh
builtin-shortlog.c builtin-show-branch.c builtin-show-ref.c
builtin-shortlog.o builtin-show-branch.o builtin-show-ref.o
[torvalds@nehalem git]$ em builtin-shor<tab>
builtin-shortlog.c builtin-shortlog.o
[torvalds@nehalem git]$ em builtin-shortlog.c
you get
[torvalds@nehalem git]$ em buil<tab> [type]
builtin/ builtin.h
[torvalds@nehalem git]$ em builtin [auto-completes to]
[torvalds@nehalem git]$ em builtin/sh<tab> [type]
shortlog.c shortlog.o show-branch.c show-branch.o show-ref.c show-ref.o
[torvalds@nehalem git]$ em builtin/sho [auto-completes to]
[torvalds@nehalem git]$ em builtin/shor<tab> [type]
shortlog.c shortlog.o
[torvalds@nehalem git]$ em builtin/shortlog.c
which doesn't seem all that different, but not having that annoying
break in "Display all 180 possibilities?" is quite a relief.
NOTE! If you do this in a clean tree (no object files etc), or using an
editor that has auto-completion rules that ignores '*.o' files, you
won't see that annoying 'Display all 180 possibilities?' message - it
will just show the choices instead. I think bash has some cut-off
around 100 choices or something.
So the reason I see this is that I'm using an odd editory, and thus
don't have the rules to cut down on auto-completion. But you can
simulate that by using 'ls' instead, or something similar.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
