This test asks for an impossible conversion to the system by
preparing an UTF-8 translation with characters that cannot be
expressed in ISO-8859-1, and then asking the message shown in
ISO-8859-1. Even though the behaviour against such a request is
undefined, it may be interesting to see what the system does, and
the purpose of this test is to see if there are platforms that
exhibit behaviour that we haven't seen.
The original recognized two known modes of behaviour:
- the key used to query the message catalog ("TEST: Old English
Runes"), saying "I cannot do that i18n".
- impossible characters replaced with ASCII "?", saying "I punt".
but they were treated totally differently. The test simply issued
an informational message "Your system punts on this one" for the
first error mode, while it diagnosed the latter as "Your system is
good; you pass!".
It turns out that Mac OS X exhibits a third mode of error behaviour,
to spew out the raw value stored in the message catalog. The test
diagnosed this behaviour as "broken", but it is merely trying to do
its best to respond to an impossible request by saying "I punt" in a
way that is slightly different from the second one.
Update the offending test to make it clear what is (and is not)
being tested, update the code structure so that newly discovered
error mode can easily be added to it later, and reword the message
that comes from a failing case to clarify that it is not the system
that is broken when it fails, but merely that the behaviour is not
something we have seen.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'log -3000 (baseline)' test accidentally still used -1000 from an
earlier version.
Noticed-by: Lawrence Holding <Lawrence.Holding@cubic.com>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By Jens Lehmann (3) and Johannes Sixt (1)
* jl/maint-submodule-relative:
submodules: fix ambiguous absolute paths under Windows
submodules: refactor computation of relative gitdir path
submodules: always use a relative path from gitdir to work tree
submodules: always use a relative path to gitdir
The only bug right now is that $GIT_TEST_CMP is needed for test_cmp to
work.
However, we also export the three most important paths for tests:
TEST_DIRECTORY
TRASH_DIRECTORY
GIT_BUILD_DIR
Since they are available within test_expect_success, a future test
writer may expect them to also be defined in test_perf.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Loading it in the subshells still referred to $TEST_DIRECTORY/..,
which was only correct in preliminary versions of perf-lib.sh
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By Junio C Hamano (2) and Ramsay Jones (1)
* jc/pickaxe-ignore-case:
ctype.c: Fix a sparse warning
pickaxe: allow -i to search in patch case-insensitively
grep: use static trans-case table
This command indirectly calls check_sha1_signature() (add_info_ref ->
deref_tag -> parse_object -> ..) , which may put whole blob in memory
if the blob's size is under core.bigfilethreshold. As config is not
read, the threshold is always 512MB. Respect user settings here.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
New test cases list commands that should work when memory is
limited. All memory allocation functions (*) learn to reject any
allocation larger than $GIT_ALLOC_LIMIT if set.
(*) Not exactly all. Some places do not use x* functions, but
malloc/calloc directly, notably diff-delta. These code path should
never be run on large blobs.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By Junio C Hamano
* jc/maint-diff-patch-header:
diff -p: squelch "diff --git" header for stat-dirty paths
t4011: illustrate "diff-index -p" on stat-dirty paths
t4011: modernise style
By Thomas Rast
* tr/maint-bundle-boundary:
bundle: keep around names passed to add_pending_object()
t5510: ensure we stay in the toplevel test dir
t5510: refactor bundle->pack conversion
By Zbigniew Jędrzejewski-Szmek (8) and Junio C Hamano (1)
* zj/diff-stat-dyncol:
: This breaks tests. Perhaps it is not worth using the decimal-width stuff
: for this series, at least initially.
diff --stat: add config option to limit graph width
diff --stat: enable limiting of the graph part
diff --stat: add a test for output with COLUMNS=40
diff --stat: use a maximum of 5/8 for the filename part
merge --stat: use the full terminal width
log --stat: use the full terminal width
show --stat: use the full terminal width
diff --stat: use the full terminal width
diff --stat: tests for long filenames and big change counts
OS X's sed and grep would complain with (respectively)
sed: 1: "/^-/{p;q}": extra characters at the end of q command
grep: Regular expression too big
For sed, use an explicit ; to terminate the q command.
For grep, spell the "40 hex digits" explicitly in the regex, which
should be safe as other tests already use this and we haven't got
breakage reports on OS X about them.
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
8c912ee (teach --histogram to diff, 2011-07-12) claimed histogram diff
was faster than both Myers and patience.
We have since incorporated a performance testing framework, so add a
test that compares the various diff tasks performed in a real 'log -p'
workload. This does indeed show that histogram diff slightly beats
Myers, while patience is much slower than the others.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current message is too long and at too low a level for anybody
to understand it if they don't know about the configuration format
already.
The text about setting up a remote is superfluous and doesn't help
understand or recover from the error that has happened. Show the
usage more prominently and explain how to set up the tracking
information. If there is only one remote, that name is used instead
of the generic <remote>.
Also simplify the message we print on detached HEAD to remove
unnecessary information which is better left for the documentation.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Update draft release notes to 1.7.9.3 for the last time
http.proxy: also mention https_proxy and all_proxy
t0300: work around bug in dash 0.5.6
t5512 (ls-remote): modernize style
tests: fix spurious error when run directly with Solaris /usr/xpg4/bin/sh
* jk/maint-avoid-streaming-filtered-contents:
do not stream large files to pack when filters are in use
teach dry-run convert_to_git not to require a src buffer
teach convert_to_git a "dry run" mode
* tr/maint-bundle-long-subject:
t5704: match tests to modern style
strbuf: improve strbuf_get*line documentation
bundle: use a strbuf to scan the log for boundary commits
bundle: put strbuf_readline_fd in strbuf.c with adjustments
In module_clone() the rel_gitdir variable was computed differently when
"git rev-parse --git-dir" returned a relative path than when it returned
an absolute path. This is not optimal, as different code paths are used
depending on the return value of that command.
Fix that by reusing the differing path components computed for setting the
core.worktree config setting, which leaves a single code path for setting
both instead of having three and makes the code much shorter.
This also fixes the bug that in the computation of how many directories
have to be traversed up to hit the root directory of the submodule the
name of the submodule was used where the path should have been used. This
lead to problems after renaming submodules into another directory level.
Even though the "(cd $somewhere && pwd)" approach breaks the flexibility
of symlinks, that is no issue here as we have to have one relative path
pointing from the work tree to the gitdir and another pointing back, which
will never work anyway when a symlink along one of those paths is changed
because the directory it points to was moved.
Also add a test moving a submodule into a deeper directory to catch any
future breakage here and to document what has to be done when a submodule
needs to be moved until git mv learns to do that. Simply moving it to the
new location doesn't work, as the core.worktree and possibly the gitfile
setting too will be wrong. So it has to be removed from filesystem and
index, then the new location has to be added into the index and the
.gitmodules file has to be updated. After that a git submodule update will
check out the submodule at the new location.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since recently a submodule with name <name> has its git directory in the
.git/modules/<name> directory of the superproject while the work tree
contains a gitfile pointing there. To make that work the git directory has
the core.worktree configuration set in its config file to point back to
the work tree.
That core.worktree is an absolute path set by the initial clone of the
submodule. A relative path is preferable here because it allows the
superproject to be moved around without invalidating that setting, so
compute and set that relative path after cloning or reactivating the
submodule.
This also fixes a bug when moving a submodule around inside the
superproject, as the current code forgot to update the setting to the new
submodule work tree location.
Enhance t7400 to ensure that future versions won't re-add absolute paths
by accident and that moving a superproject won't break submodules.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since recently a submodule with name <name> has its git directory in the
.git/modules/<name> directory of the superproject while the work tree
contains a gitfile pointing there. When the submodule git directory needs
to be cloned because it is not found in .git/modules/<name> the clone
command will write an absolute path into the gitfile. When no clone is
necessary the git directory will be reactivated by the git-submodule.sh
script by writing a relative path into the gitfile.
This is inconsistent, as the behavior depends on the submodule having been
cloned before into the .git/modules of the superproject. A relative path
is preferable here because it allows the superproject to be moved around
without invalidating the gitfile. We do that by always writing the
relative path into the gitfile, which overwrites the absolute path the
clone command may have written there.
This is only the first step to make superprojects movable again like they
were before the separate-git-dir approach was introduced. The second step
is to use a relative path in core.worktree too.
Enhance t7400 to ensure that future versions won't re-add absolute paths
by accident.
While at it also replace an if/else construct evaluating the presence
of the 'reference' option with a single line of bash code.
Reported-by: Antony Male <antony.male@gmail.com>
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The user specifies a long option but forgets to type the second
leading dash, we currently detect and report that fact if its first
letter is a valid short option. This is done for safety, to avoid
ambiguity between short options (and their arguments) and a long
option with a missing dash.
This diagnostic message is also helpful for long options whose first
letter is not a valid short option, however. Print it in that case,
too, as a courtesy.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The construct 'while IFS== read' makes dash 0.5.6 execute
read without changing IFS, which results in test breakages
all over the place in t0300. Neither dash 0.5.5.1 and older
nor dash 0.5.7 and newer are affected: The problem was
introduded resp. fixed by the commits
55c46b7 ([BUILTIN] Honor tab as IFS whitespace when
splitting fields in readcmd, 2009-08-11)
1d806ac ([VAR] Do not poplocalvars prematurely on regular
utilities, 2010-05-27)
in http://git.kernel.org/?p=utils/dash/dash.git
Putting 'IFS==' before that line makes all versions of dash
work.
This looks like a dash bug, not a misinterpretation of the
standard. However, it's worth working around for two
reasons. One, this version of dash was released in Fedora
14-16, so the bug is found in the wild. And two, at least
one other shell, Solaris /bin/sh, choked on this by
persisting IFS after the read invocation. That is not a
shell we usually care about, and I think this use of IFS is
acceptable by POSIX (which allows other behavior near
"special builtins", but "read" is not one of those). But it
seems that this may be a subtle, not-well-tested case for
some shells. Given that the workaround is so simple, it's
worth just being defensive.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prepare expected output inside test_expect_success that uses it.
Also remove excess blank lines.
Signed-off-by: Tom Grennan <tmgrennan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Match the style to more modern test scripts, namely:
- Prefer tabs for indentation.
- The first line of each test has prereq, title and opening sq for the
script body.
- Move cleanup or initialization of data used by a test inside the test
itself.
- Put a newline before the closing sq for each test.
- Don't conclude the test descriptions with a full stop.
- Prefer 'test_line_count = COUNT FILE' over 'test $(wc -l <FILE) = COUNT'
- Prefer 'test_line_count = 0 FILE' over 'cmp -s /dev/null FILE'
- Use '<<-EOF' style for here documents, so that they can be indented
as well. Bot don't do that in case the resulting lines would be too
long. Also when there is no $variable_substitution in the body of a
here document, quote \EOF.
- Don't redirect the output of commands to /dev/null unconditionally,
the git testing framework should already take care of handling test
verbosity transparently and uniformly.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If any test script is run directly with Solaris 10 /usr/xpg4/bin/sh or
/bin/ksh, it fails spuriously with a message like:
t0000-basic.sh[31]: unset: bad argument count
This happens because those shells bail out when encountering a call to
"unset" with no arguments, and such unset call could take place in
'test-lib.sh'. Fix that issue, and add a proper comment to ensure we
don't regress in this respect.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'name' field passed to add_pending_object() is used to later
deduplicate in object_array_remove_duplicates().
git-bundle had a bug in this area since 18449ab (git-bundle: avoid
packing objects which are in the prerequisites, 2007-03-08): it passed
the name of each boundary object in a static buffer. In other words,
all that object_array_remove_duplicates() saw was the name of the
*last* added boundary object.
The recent switch to a strbuf in bc2fed4 (bundle: use a strbuf to scan
the log for boundary commits, 2012-02-22) made this slightly worse: we
now free the buffer at the end, so it is not even guaranteed that it
still points into addressable memory by the time object_array_remove_
duplicates looks at it. On the plus side however, it was now
detectable by valgrind.
The fix is easy: pass a copy of the string to add_pending_object.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The last test descended into a subdir without ever re-emerging, which
is not so nice to the next test writer.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's not so much a conversion as a "strip everything up to and
including the first blank line", but it will come in handy again.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The plumbing "diff" commands look at the working tree files without
refreshing the index themselves for performance reasons (the calling
script is expected to do that upfront just once, before calling one or
more of them). In the early days of git, they showed the "diff --git"
header before they actually ask the xdiff machinery to produce patches,
and ended up showing only these headers if the real contents are the same
and the difference they noticed was only because the stat info cached in
the index did not match that of the working tree. It was too late for the
implementation to take the header that it already emitted back.
But 3e97c7c (No diff -b/-w output for all-whitespace changes, 2009-11-19)
introduced necessary logic to keep the meta-information headers in a
strbuf and delay their output until the xdiff machinery noticed actual
changes. This was primarily in order to generate patches that ignore
whitespaces. When operating under "-w" mode, we wouldn't know if the
header is needed until we actually look at the resulting patch, so it was
a sensible thing to do, but we did not realize that the same reasoning
applies to stat-dirty paths.
Later, 296c6bb (diff: fix "git show -C -C" output when renaming a binary
file, 2010-05-26) generalized this machinery and added must_show_header
toggle. This is turned on when the header must be shown even when there
is no patch to be produced, e.g. only the mode was changed, or the path
was renamed, without changing the contents. However, when it did so, it
still kept the special case for the "-w" mode, which meant that the
plumbing would keep showing these phantom changes.
This corrects this historical inconsistency by allowing the plumbing to
omit paths that are only stat-dirty from its output in the same way as it
handles whitespace only changes under "-w" option.
The change in the behaviour can be seen in the updated test.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The plumbing that looks at the working tree, i.e. "diff-index" and
"diff-files", always emit the "diff --git a/path b/path" header lines
without anything else for paths that are only stat-dirty (i.e. different
only because the cached stat information in the index no longer matches
that of the working tree, but the real contents are the same), when
these commands are run with "-p" option to produce patches.
Illustrate this current behaviour. Also demonstrate that with the "-w"
option, we (correctly) hold off showing a "diff --git" header until actual
differences have been found. This also suppresses the header for merely
stat-dirty files, which is inconsistent.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Match the style to more modern test scripts, namely:
- The first line of each test has prereq, title and opening sq for the
script body. This makes the test shorter while reducing the need for
backslashes.
- Be prepared for the case in which the previous test may have failed.
If a test wants to start from not having "frotz" that the previous test
may have created, write "rm -f frotz", not "rm frotz".
- Prepare the expected output inside your own test.
- The order of comparison to check the result is "diff expected actual",
so that the output will show how the output from the git you just broke
is different from what is expected.
- Write no SP between redirection '>' (or '<' for that matter) and the
filename.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Config option diff.statGraphWidth=<width> is equivalent to
--stat-graph-width=<width>, except that the config option is ignored
by format-patch.
For the graph-width limiting to be usable, it should happen
'automatically' once configured, hence the config option.
Nevertheless, graph width limiting only makes sense when used on a
wide terminal, so it should not influence the output of format-patch,
which adheres to the 80-column standard.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new option --stat-graph-width=<width> can be used to limit the width
of the graph part even is more space is available. Up to <width>
columns will be used for the graph.
If commits changing a lot of lines are displayed in a wide terminal
window (200 or more columns), and the +- graph uses the full width,
the output can be hard to comfortably scan with a horizontal movement
of human eyes. Messages wrapped to about 80 columns would be
interspersed with very long +- lines. It makes sense to limit the
width of the graph part to a fixed value (e.g. 70 columns), even if
more columns are available.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for the introduction on the limit of the width of the
graph part, a new test with COLUMNS=40 is added to check that the
environment variable influences diff, show, log, but not format-patch.
A new test is added because limiting the graph part makes COLUMNS=200
stop influencing diff --stat behaviour, which isn't wide enough now.
The old test with COLUMNS=200 is retained to check for regressions.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The way that available columns are divided between the filename part
and the graph part is modified to use as many columns as necessary for
the filenames and the rest for the graph.
If there isn't enough columns to print both the filename and the
graph, at least 5/8 of available space is devoted to filenames. On a
standard 80 column terminal, or if not connected to a terminal and
using the default of 80 columns, this gives the same partition as
before.
The effect of this change is visible in the patch to the test vector
in t4052; with a small change with long filename, it stops truncating
the name part too short, and also allocates a bit more columns to the
graph for larger changes.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make merge --stat behave like diff --stat and use the full terminal
width.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make log --stat behave like diff --stat and use the full terminal
width.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make show --stat behave like diff --stat and use the full terminal
width.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Default to the real terminal width for diff --stat output, instead
of the hard-coded 80 columns.
Some projects (especially in Java), have long filename paths, with
nested directories or long individual filenames. When files are
renamed, the filename part in stat output can be almost useless. If
the middle part between { and } is long (because the file was moved to
a completely different directory), then most of the path would be
truncated.
It makes sense to detect and use the full terminal width and display
full filenames if possible.
The are commands like diff, show, and log, which can adapt the output
to the terminal width. There are also commands like format-patch,
whose output should be independent of the terminal width. Since it is
safer to use the 80-column default, the real terminal width is only
used if requested by the calling code by setting diffopts.stat_width=-1.
Normally this value is 0, and can be set by the user only to a
non-negative value, so -1 is safe to use internally.
This patch only changes the diff builtin to use the full terminal width.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for updates to the "diff --stat" that updates the logic
to split the allotted columns into the name part and the graph part to
make the output more readable, add a handful of tests to document the
corner case behaviour in which long filenames and big changes are shown.
When a pathname is so long that it cannot fit on the column, the current
code truncates it to make sure that the graph part has enough room to show
a meaningful graph. If the actual change is small (e.g. only one line
changed), this results in the final output that is shorter than the width
we aim for.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git log -S<string>" is a useful way to find the last commit in the
codebase that touched the <string>. As it was designed to be used by a
porcelain script to dig the history starting from a block of text that
appear in the starting commit, it never had to look for anything but an
exact match.
When used by an end user who wants to look for the last commit that
removed a string (e.g. name of a variable) that he vaguely remembers,
however, it is useful to support case insensitive match.
When given the "--regexp-ignore-case" (or "-i") option, which originally
was designed to affect case sensitivity of the search done in the commit
log part, e.g. "log --grep", the matches made with -S/-G pickaxe search is
done case insensitively now.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The default output from "fsck" is often overwhelmed by informational
message on dangling objects, especially if you do not repack often, and a
real error can easily be buried.
Add "--no-dangling" option to omit them, and update the user manual to
demonstrate its use.
Based on a patch by Clemens Buchacher, but reverted the part to change
the default to --no-dangling, which is unsuitable for the first patch.
The usual three-step procedure to break the backward compatibility over
time needs to happen on top of this, if we were to go in that direction.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using regexp search ('sr' parameter / $search_use_regexp variable
is true), check first that regexp is valid.
Without this patch we would get an error from Perl during search (if
searching is performed by gitweb), or highlighting matches substring
(if applicable), if user provided invalid regexp... which means broken
HTML, with error page (including HTTP headers) generated after gitweb
already produced some output.
Add test that illustrates such error: for example for regexp "*\.git"
we would get the following error:
Quantifier follows nothing in regex; marked by <-- HERE in m/* <-- HERE \.git/
at /var/www/cgi-bin/gitweb.cgi line 3084.
Reported-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without the magic line, prove shows lots and lots of errors:
% prove ./t9804-git-p4-label.sh
./t9804-git-p4-label.sh .. syntax error at ./t9804-git-p4-label.sh line 3, near ". ."
...
When #!/bin/sh is added, tests are skipped (I have no p4d).
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier, fba4f1 (grep -P: Fix matching ^ and $) fixed an ancient bug. Add
some tests to protect the change from future breakages; a slightly broken
version of this was a part of the originally submitted patch.
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
print_ref_list looks up the merge_filter_ref and assumes that a valid
pointer is returned. When the object doesn't exist, it tries to
dereference a NULL pointer. This can be the case when git branch
--merged is given an argument that isn't a valid commit name.
Check whether the lookup returns a NULL pointer and die with an error
if it does. Add a test, while we're at it.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tr/maint-bundle-long-subject:
t5704: match tests to modern style
strbuf: improve strbuf_get*line documentation
bundle: use a strbuf to scan the log for boundary commits
bundle: put strbuf_readline_fd in strbuf.c with adjustments
* fc/push-prune:
push: add '--prune' option
remote: refactor code into alloc_delete_ref()
remote: reorganize check_pattern_match()
remote: use a local variable in match_push_refs()
Conflicts:
builtin/push.c
* jk/maint-avoid-streaming-filtered-contents:
do not stream large files to pack when filters are in use
teach dry-run convert_to_git not to require a src buffer
teach convert_to_git a "dry run" mode
This adds a test for the previous one to make sure that "am -3 -p0" can
read patches created with the --no-prefix option.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Document accumulated fixes since 1.7.9.2
Git 1.7.8.5
grep -P: Fix matching ^ and $
am: don't infloop for an empty input file
rebase -m: only call "notes copy" when rewritten exists and is non-empty
git-p4: remove bash-ism in t9800
git-p4: remove bash-ism in t9809
git-p4: fix submit regression with clientSpec and subdir clone
git-p4: set useClientSpec variable on initial clone
Makefile: add thread-utils.h to LIB_H
Conflicts:
RelNotes
t/t9809-git-p4-client-view.sh
git-am.sh's check_patch_format function would attempt to preview
the patch to guess its format, but would go into an infinite loop
when the patch file happened to be empty. The solution: exit the
loop when "read" fails, not when the line var, "$l1" becomes empty.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This works in both bash and dash:
$ bash -c 'VAR=1 env' | grep VAR
VAR=1
$ dash -c 'VAR=1 env' | grep VAR
VAR=1
But environment variables assigned this way are not necessarily propagated
through a function in POSIX compliant shells:
$ bash -c 'f() { "$@"
}; VAR=1 f "env"' | grep VAR
VAR=1
$ dash -c 'f() { "$@"
}; VAR=1 f "env"' | grep VAR
Fix constructs like this, in particular, setting variables through
test_must_fail.
Based-on-patch-by: Vitor Antunes <vitor.hda@gmail.com>
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Plain old $# works to count the number of arguments in
either bash or dash, even if the arguments have spaces.
Based-on-patch-by: Vitor Antunes <vitor.hda@gmail.com>
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the --use-client-spec is given to clone, and the clone
path is a subset of the full tree as specified in the client,
future submits will go to the wrong place.
Factor out getClientSpec() so both clone/sync and submit can
use it. Introduce getClientRoot() that is needed for the client
spec case, and use it instead of p4Where().
Test the five possible submit behaviors (add, modify, rename,
copy, delete).
Reported-by: Laurent Charrière <lcharriere@promptu.com>
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If --use-client-spec was given, set the matching configuration
variable. This is necessary to ensure that future submits
work properly.
The alternatives of requiring the user to set it, or providing
a command-line option on every submit, are error prone.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Long options can be negated by adding no- right after the leading
two dashes. This is useful e.g. to override options set by aliases.
For options that are defined to start with no- already, this looks
a bit funny. Allow such options to also be negated by removing the
prefix.
The following thirteen options are affected:
apply --no-add
bisect--helper --no-checkout
checkout-index --no-create
clone --no-checkout --no-hardlinks
commit --no-verify --no-post-rewrite
format-patch --no-binary
hash-object --no-filters
read-tree --no-sparse-checkout
revert --no-commit
show-branch --no-name
update-ref --no-deref
The following five are NOT affected because they are defined with
PARSE_OPT_NONEG or the non-negated version is defined as well:
branch --no-merged
format-patch --no-stat --no-numbered
update-index --no-assume-unchanged --no-skip-worktree
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce OPT_BOOL() to test-parse-options and add some tests for
these "true" boolean options. Rename OPT_BOOLEAN to OPT_COUNTUP and
OPTION_BOOLEAN to OPTION_COUNTUP as well.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because git's object format requires us to specify the
number of bytes in the object in its header, we must know
the size before streaming a blob into the object database.
This is not a problem when adding a regular file, as we can
get the size from stat(). However, when filters are in use
(such as autocrlf, or the ident, filter, or eol
gitattributes), we have no idea what the ultimate size will
be.
The current code just punts on the whole issue and ignores
filter configuration entirely for files larger than
core.bigfilethreshold. This can generate confusing results
if you use filters for large binary files, as the filter
will suddenly stop working as the file goes over a certain
size. Rather than try to handle unknown input sizes with
streaming, this patch just turns off the streaming
optimization when filters are in use.
This has a slight performance regression in a very specific
case: if you have autocrlf on, but no gitattributes, a large
binary file will avoid the streaming code path because we
don't know beforehand whether it will need conversion or
not. But if you are handling large binary files, you should
be marking them as such via attributes (or at least not
using autocrlf, and instead marking your text files as
such). And the flip side is that if you have a large
_non_-binary file, there is a correctness improvement;
before we did not apply the conversion at all.
The first half of the new t1051 script covers these failures
on input. The second half tests the matching output code
paths. These already work correctly, and do not need any
adjustment.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test did not adhere to the current style on several counts:
. empty lines around the test blocks, but within the test string
. ': > file' or even just '> file' with an extra space
. inconsistent indentation
. hand-rolled commits instead of using test_commit
Fix all of them.
There's a catch to the last point: test_commit creates a tag, which the
original test did not create. We still change it to test_commit, and
explicitly delete the tags, so as to highlight that the test relies on not
having them.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ld/git-p4-expanded-keywords:
: Teach git-p4 to unexpand $RCS$-like keywords that are embedded in
: tracked contents in order to reduce unnecessary merge conflicts.
git-p4: add initial support for RCS keywords
* jk/config-include:
: An assignment to the include.path pseudo-variable causes the named file
: to be included in-place when Git looks up configuration variables.
config: add include directive
config: eliminate config_exclusive_filename
config: stop using config_exclusive_filename
config: provide a version of git_config with more options
config: teach git_config_rename_section a file argument
config: teach git_config_set_multivar_in_file a default path
config: copy the return value of prefix_filename
t1300: add missing &&-chaining
docs/api-config: minor clarifications
docs: add a basic description of the config API
* tr/perftest:
Add a performance test for git-grep
Introduce a performance testing framework
Move the user-facing test library to test-lib-functions.sh
RCS keywords cause problems for git-p4 as perforce always
expands them (if +k is set) and so when applying the patch,
git reports that the files have been modified by both sides,
when in fact they haven't.
This change means that when git-p4 detects a problem applying
a patch, it will check to see if keyword expansion could be
the culprit. If it is, it strips the keywords in the p4
repository so that they match what git is expecting. It then
has another go at applying the patch.
This behaviour is enabled with a new git-p4 configuration
option and is off by default.
Acked-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The first part of the bundle header contains the boundary commits, and
could be approximated by
# v2 git bundle
$(git rev-list --pretty=oneline --boundary <ARGS> | grep ^-)
git-bundle actually spawns exactly this rev-list invocation, and does
the grepping internally.
There was a subtle bug in the latter step: it used fgets() with a
1024-byte buffer. If the user has sufficiently long subjects (e.g.,
by not adhering to the git oneline-subject convention in the first
place), the 'oneline' format can easily overflow the buffer. fgets()
then returns the rest of the line in the next call(s). If one of
these remaining parts started with '-', git-bundle would mistakenly
insert it into the bundle thinking it was a boundary commit.
Fix it by using strbuf_getwholeline() instead, which handles arbitrary
line lengths correctly.
Note that on the receiving side in parse_bundle_header() we were
already using strbuf_getwholeline_fd(), so that part is safe.
Reported-by: Jannis Pohlmann <jannis.pohlmann@codethink.co.uk>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When pushing groups of refs to a remote, there is no simple way to remove
old refs that still exist at the remote that is no longer updated from us.
This will allow us to remove such refs from the remote.
With this change, running this command
$ git push --prune remote refs/heads/*:refs/remotes/laptop/*
removes refs/remotes/laptop/foo from the remote if we do not have branch
"foo" locally anymore.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When cherry-pick fails it offers a helpful hint about how to
proceed. The hint tells the user how to do the cleanup
needed by the conflicted cherry-pick and finish the job after
conflict resolution. In case of cherry-pick --no-commit, the
hint goes too far. It tells the user to finish up with
'git commit'. That is not what this git-cherry-pick was
trying to do in the first place.
Restrict the hint in case of --no-commit to avoid giving this
extra advice.
Also, add a test verifying the reduced hint for the --no-commit
version of cherry-pick.
Signed-off-by: Phil Hord <hordp@cisco.com>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'master' of git://bogomips.org/git-svn:
git-svn.perl: fix a false-positive in the "already exists" test
git-svn.perl: perform deletions before anything else
git-svn: Fix time zone in --localtime
git-svn: un-break "git svn rebase" when log.abbrevCommit=true
git-svn: remove redundant porcelain option to rev-list
completion: add --interactive option to git svn dcommit
* jk/grep-binary-attribute:
grep: pre-load userdiff drivers when threaded
grep: load file data after checking binary-ness
grep: respect diff attributes for binary-ness
grep: cache userdiff_driver in grep_source
grep: drop grep_buffer's "name" parameter
convert git-grep to use grep_source interface
grep: refactor the concept of "grep source" into an object
grep: move sha1-reading mutex into low-level code
grep: make locking flag global
open_or_add_dir checks to see if the directory already exists or not.
If it already exists and is not a directory, then we fail. However,
open_or_add_dir did not previously account for the possibility that the
path did exist as a file, but is deleted in the current commit.
In order to prevent this legitimate case from failing, open_or_add_dir
needs to know what files are deleted in the current commit.
Unfortunately that information has to be plumbed through a couple of
layers.
Signed-off-by: Steven Walter <stevenrwalter@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Commit ff7f218 (gitweb: Fix file links in "grep" search, 2012-01-05),
added $file_href variable, to reduce duplication and have the fix
applied in single place.
Unfortunately it made variable defined inside the loop, not taking into
account the fact that $file_href was set only if file changed.
Therefore for files with multiple matches $file_href was undefined for
second and subsequent matches.
Fix this bug by moving $file_href declaration outside loop.
Adds tests for almost all forms of sarch in gitweb, which were missing
from testuite. Note that it only tests if there are no warnings, and
it doesn't check that gitweb finds what it should find.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running "git add --refresh <pathspec>", we incorrectly showed the
path that is unmerged even if it is outside the specified pathspec, even
though we did honor pathspec and refreshed only the paths that matched.
Note that this cange does not affect "git update-index --refresh"; for
hysterical raisins, it does not take a pathspec (it takes real paths) and
more importantly itss command line options are parsed and executed one by
one as they are encountered, so "git update-index --refresh foo" means
"first refresh the index, and then update the entry 'foo' by hashing the
contents in file 'foo'", not "refresh only entry 'foo'".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a repository whose HEAD points to an unborn branch with no commits,
"heads" view and "summary" view (which shows what is shown in "heads"
view) compared the object names of commits at the tip of branches with the
output from "git rev-parse HEAD", which caused comparison of a string with
undef and resulted in a warning in the server log.
This can happen if non-bare repository (with default 'master' branch)
is updated not via committing but by other means like push to it, or
Gerrit. It can happen also just after running "git checkout --orphan
<new branch>" but before creating any new commit on this branch.
Rewrite the comparison so that it also works when $head points at nothing;
in such a case, no branch can be "the current branch", add a test for it.
While at it, rename local variable $head to $head_at, as it points to
current commit rather than current branch name (HEAD contents).
The code still incorrectly shows all branches that point at the same
commit as what HEAD points as "the current branch", even when HEAD is
detached. Fixing this bug is outside the scope of this patch.
Reported-by: Rajesh Boyapati
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The only catch is that we don't really know what our repo contains, so
we have to ignore any possible "not found" status from git-grep.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This introduces a performance testing framework under t/perf/. It
tries to be as close to the test-lib.sh infrastructure as possible,
and thus should be easy to get used to for git developers.
The following points were considered for the implementation:
1. You usually want to compare arbitrary revisions/build trees against
each other. They may not have the performance test under
consideration, or even the perf-lib.sh infrastructure.
To cope with this, the 'run' script lets you specify arbitrary
build dirs and revisions. It even automatically builds the revisions
if it doesn't have them at hand yet.
2. Usually you would not want to run all tests. It would take too
long anyway. The 'run' script lets you specify which tests to run;
or you can also do it manually. There is a Makefile for
discoverability and 'make clean', but it is not meant for
real-world use.
3. Creating test repos from scratch in every test is extremely
time-consuming, and shipping or downloading such large/weird repos
is out of the question.
We leave this decision to the user. Two different sizes of test
repos can be configured, and the scripts just copy one or more of
those (using hardlinks for the object store). By default it tries
to use the build tree's git.git repository.
This is fairly fast and versatile. Using a copy instead of a clone
preserves many properties that the user may want to test for, such
as lots of loose objects, unpacked refs, etc.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This just moves all the user-facing functions to a separate file and
sources that instead.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It can be useful to split your ~/.gitconfig across multiple
files. For example, you might have a "main" file which is
used on many machines, but a small set of per-machine
tweaks. Or you may want to make some of your config public
(e.g., clever aliases) while keeping other data back (e.g.,
your name or other identifying information). Or you may want
to include a number of config options in some subset of your
repos without copying and pasting (e.g., you want to
reference them from the .git/config of participating repos).
This patch introduces an include directive for config files.
It looks like:
[include]
path = /path/to/file
This is syntactically backwards-compatible with existing git
config parsers (i.e., they will see it as another config
entry and ignore it unless you are looking up include.path).
The implementation provides a "git_config_include" callback
which wraps regular config callbacks. Callers can pass it to
git_config_from_file, and it will transparently follow any
include directives, passing all of the discovered options to
the real callback.
Include directives are turned on automatically for "regular"
git config parsing. This includes calls to git_config, as
well as calls to the "git config" program that do not
specify a single file (e.g., using "-f", "--global", etc).
They are not turned on in other cases, including:
1. Parsing of other config-like files, like .gitmodules.
There isn't a real need, and I'd rather be conservative
and avoid unnecessary incompatibility or confusion.
2. Reading single files via "git config". This is for two
reasons:
a. backwards compatibility with scripts looking at
config-like files.
b. inspection of a specific file probably means you
care about just what's in that file, not a general
lookup for "do we have this value anywhere at
all". If that is not the case, the caller can
always specify "--includes".
3. Writing files via "git config"; we want to treat
include.* variables as literal items to be copied (or
modified), and not expand them. So "git config
--unset-all foo.bar" would operate _only_ on
.git/config, not any of its included files (just as it
also does not operate on ~/.gitconfig).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-config command sometimes operates on the default set
of config files (either reading from all, or writing to repo
config), and sometimes operates on a specific file. In the
latter case, we set the magic global config_exclusive_filename,
and the code in config.c does the right thing.
Instead, let's have git-config use the "advanced" variants
of config.c's functions which let it specify an individual
filename (or NULL for the default). This makes the code a
lot more obvious, and fixes two small bugs:
1. A relative path specified by GIT_CONFIG=foo will look
in the wrong directory if we have to chdir as part of
repository setup. We already handle this properly for
"git config -f foo", but the GIT_CONFIG lookup used
config_exclusive_filename directly. By dropping to a
single magic variable, the GIT_CONFIG case now just
works.
2. Calling "git config -f foo --edit" would not respect
core.editor. This is because just before editing, we
called git_config, which would respect the
config_exclusive_filename setting, even though this
particular git_config call was not about looking in the
user's specified file, but rather about loading actual
git config, just as any other git program would.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By default, a missing filter driver or a failure from the filter driver is
not an error, but merely makes the filter operation a no-op pass through.
This is useful to massage the content into a shape that is more convenient
for the platform, filesystem, and the user to use, and the content filter
mechanism is not used to turn something unusable into usable.
However, we could also use of the content filtering mechanism and store
the content that cannot be directly used in the repository (e.g. a UUID
that refers to the true content stored outside git, or an encrypted
content) and turn it into a usable form upon checkout (e.g. download the
external content, or decrypt the encrypted content). For such a use case,
the content cannot be used when filter driver fails, and we need a way to
tell Git to abort the whole operation for such a failing or missing filter
driver.
Add a new "filter.<driver>.required" configuration variable to mark the
second use case. When it is set, git will abort the operation when the
filter driver does not exist or exits with a non-zero status code.
Signed-off-by: Jehan Bing <jehan@orb.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/grep-binary-attribute:
grep: pre-load userdiff drivers when threaded
grep: load file data after checking binary-ness
grep: respect diff attributes for binary-ness
grep: cache userdiff_driver in grep_source
grep: drop grep_buffer's "name" parameter
convert git-grep to use grep_source interface
grep: refactor the concept of "grep source" into an object
grep: move sha1-reading mutex into low-level code
grep: make locking flag global
* nd/pack-objects-parseopt:
pack-objects: convert to use parse_options()
pack-objects: remove bogus comment
pack-objects: do not accept "--index-version=version,"
* mh/war-on-extra-refs:
refs: remove the extra_refs API
clone: do not add alternate references to extra_refs
everything_local(): mark alternate refs as complete
fetch-pack.c: inline insert_alternate_refs()
fetch-pack.c: rename some parameters from "path" to "refname"
clone.c: move more code into the "if (refs)" conditional
t5700: document a failure of alternates to affect fetch
* jk/maint-tag-show-fixes:
tag: do not show non-tag contents with "-n"
tag: die when listing missing or corrupt objects
tag: fix output of "tag -n" when errors occur
Conflicts:
t/t7004-tag.sh
Receive runs rev-list --verify-objects in order to detect missing
objects. However, such errors are ignored and overridden later.
Instead, consequently ignore all update commands for which an error has
already been detected.
Some tests in t5504 are obsoleted by this change, because invalid
objects are detected even if fsck is not enabled. Instead, they now test
for different error messages depending on whether or not fsck is turned
on. A better fix would be to force a corruption that will be detected by
fsck but not by rev-list.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise the test cannot be run with custom port set to LIB_HTTPD_PORT.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By default, progress output is disabled if stderr is not a terminal.
The --progress option can be used to force progress output anyways.
Conversely, --no-progress does not force progress output. In particular,
if stderr is a terminal, progress output is enabled.
This is unintuitive. Change --no-progress to force output off.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git rev-list passes rev_list_info, not rev_list objects. Without this
fix, rev-list enables or disables the --verify-objects option depending
on a read from an undefined memory location.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change several tests to use the sane_unset function introduced in
v1.7.3.1-35-g00648ba instead of the built-in unset function.
This fixes a failure I was having on t9130-git-svn-authors-file.sh on
Solaris, and prevents several other issues from occurring.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I'm no longer running the Git smoke testing service at
smoke.git.nix.is due to Smolder being a fragile piece of software not
having time to follow through on making it easy for third parties to
run and submit their own smoke tests.
So remove the support in Git for sending smoke tests to
smoke.git.nix.is, it's still easy to modify the test suite to submit
smokes somewhere else.
This reverts the following commits:
Revert "t/README: Add SMOKE_{COMMENT,TAGS}= to smoke_report target" -- e38efac87d
Revert "t/README: Document the Smoke testing" -- d15e9ebc5c
Revert "t/Makefile: Create test-results dir for smoke target" -- 617344d77b
Revert "tests: Infrastructure for Git smoke testing" -- b6b84d1b74
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/maint-tag-show-fixes:
tag: do not show non-tag contents with "-n"
tag: die when listing missing or corrupt objects
tag: fix output of "tag -n" when errors occur
Conflicts:
t/t7004-tag.sh
Objects in an alternate object database are already available to the
local repository and therefore don't need to be fetched. So mark them
as complete in everything_local().
This fixes a test in t5700.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If an alternate supplies some, but not all, of the objects needed for
a fetch, fetch-pack nevertheless generates "want" lines for the
alternate objects that are present. Demonstrate this problem via a
failing test.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the user explicitly asked us not to, don't launch an editor.
But do everything else the same way as the "edit" case, i.e. leave the
comment with verification result in the log template and record the
mergesig in the resulting merge commit for later inspection.
Based on initiail analysis by Jonathan Nieder.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git tag -n" did not check the type of the object it is reading the top n
lines from. At least, avoid showing the beginning of trees and blobs when
dealing with lightweight tags that point at them.
As the payload of a tag and a commit look similar in that they both start
with a header block, which is skipped for the purpose of "-n" output,
followed by human readable text, allow the message of commit objects to be
shown just like the contents of tag objects. This avoids regression for
people who have been using "tag -n" to show the log messages of commits
that are pointed at by lightweight tags.
Test script is from Jeff King.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This filters the list for tags of the given object.
Example,
john$ git tag v1.0-john v1.0
john$ git tag -l --points-at v1.0
v1.0-john
v1.0
Signed-off-by: Tom Grennan <tmgrennan@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/svn-fe: (36 commits)
vcs-svn: suppress a -Wtype-limits warning
vcs-svn: allow import of > 4GiB files
vcs-svn: rename check_overflow arguments for clarity
vcs-svn/svndiff.c: squelch false "unused" warning from gcc
vcs-svn: reset first_commit_done in fast_export_init
vcs-svn: do not initialize report_buffer twice
vcs-svn: avoid hangs from corrupt deltas
vcs-svn: guard against overflow when computing preimage length
vcs-svn: cap number of bytes read from sliding view
test-svn-fe: split off "test-svn-fe -d" into a separate function
vcs-svn: implement text-delta handling
vcs-svn: let deltas use data from preimage
vcs-svn: let deltas use data from postimage
vcs-svn: verify that deltas consume all inline data
vcs-svn: implement copyfrom_data delta instruction
vcs-svn: read instructions from deltas
vcs-svn: read inline data from deltas
vcs-svn: read the preimage when applying deltas
vcs-svn: parse svndiff0 window header
vcs-svn: skeleton of an svn delta parser
...
Originally, "git add -N" was introduced to help users from forgetting to
add new files to the index before they ran "git commit -a". As an attempt
to help them further so that they do not forget to say "-a", "git commit"
to commit the index as-is was taught to error out, reminding the user that
they may have forgotten to add the final contents of the paths before
running the command.
This turned out to be a false "safety" that is useless. If the user made
changes to already tracked paths and paths added with "git add -N", and
then ran "git add" to register the final contents of the paths added with
"git add -N", "git commit" will happily create a commit out of the index,
without including the local changes made to the already tracked paths. It
was not a useful "safety" measure to prevent "forgetful" mistakes from
happening.
It turns out that this behaviour is not just a useless false "safety", but
actively hurts use cases of "git add -N" that were discovered later and
have become popular, namely, to tell Git to be aware of these paths added
by "git add -N", so that commands like "git status" and "git diff" would
include them in their output, even though the user is not interested in
including them in the next commit they are going to make.
Fix this ancient UI mistake, and instead make a commit from the index
ignoring the paths added by "git add -N" without adding real contents.
Based on the work by Nguyễn Thái Ngọc Duy, and helped by injection of
sanity from Jonathan Nieder and others on the Git mailing list.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Running "git checkout -b another" immediately after "git init" when you do
not even have a commit on 'master' fails with:
$ git checkout -b another
fatal: You are on a branch yet to be born
This is unnecessary, if we redefine "git checkout -b $name" that does not
take any $start_point (which has to be a commit) as "I want to check out a
new branch $name from the state I am in".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cb/push-quiet:
t5541: avoid TAP test miscounting
fix push --quiet: add 'quiet' capability to receive-pack
server_supports(): parse feature list more carefully
It is very easy to mistype the branch name when editing its description,
e.g.
$ git checkout -b my-topic master
: work work work
: now we are at a good point to switch working something else
$ git checkout master
: ah, let's write it down before we forget what we were doing
$ git branch --edit-description my-tpoic
The command does not notice that branch 'my-tpoic' does not exist. It is
not lost (it becomes description of an unborn my-tpoic branch), but is not
very useful. So detect such a case and error out to reduce the grief
factor from this common mistake.
This incidentally also errors out --edit-description when the HEAD points
at an unborn branch (immediately after "init", or "checkout --orphan"),
because at that point, you do not even have any commit that is part of
your history and there is no point in describing how this particular
branch is different from the branch it forked off of, which is the useful
bit of information the branch description is designed to capture.
We may want to special case the unborn case later, but that is outside the
scope of this patch to prevent more common mistakes before 1.7.9 series
gains too much widespread use.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Starting at release v1.7.9, if you ask to merge a signed tag, "git merge"
always creates a merge commit, even when the tag points at a commit that
happens to be a descendant of your current commit.
Unfortunately, this interacts rather badly for people who use --ff-only to
make sure that their branch is free of local developments. It used to be
possible to say:
$ git checkout -b frotz v1.7.9~30
$ git merge --ff-only v1.7.9
and expect that the resulting tip of frotz branch matches v1.7.9^0 (aka
the commit tagged as v1.7.9), but this fails with the updated Git with:
fatal: Not possible to fast-forward, aborting.
because a merge that merges v1.7.9 tag to v1.7.9~30 cannot be created by
fast forwarding.
We could teach users that now they have to do
$ git merge --ff-only v1.7.9^0
but it is far more pleasant for users if we DWIMmed this ourselves.
When an integrator pulls in a topic from a lieutenant via a signed tag,
even when the work done by the lieutenant happens to fast-forward, the
integrator wants to have a merge record, so the integrator will not be
asking for --ff-only when running "git pull" in such a case. Therefore,
this change should not regress the support for the use case v1.7.9 wanted
to add.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git diff --stat" and "git apply --stat" now learn to print the line
"%d files changed, %d insertions(+), %d deletions(-)" in singular form
whenever applicable. "0 insertions" and "0 deletions" are also omitted
unless they are both zero.
This matches how versions of "diffstat" that are not prehistoric produced
their output, and also makes this line translatable.
[jc: with help from Thomas Dickey in archaeology of "diffstat"]
[jc: squashed Jonathan's updates to illustrations in tutorials and a test]
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The only place that the issue this series addresses was observed
where we read "cat-file commit" output and put it in GIT_AUTHOR_DATE
in order to replay a commit with an ancient timestamp.
With the previous patch alone, "git commit --date='20100917 +0900'"
can be misinterpreted to mean an ancient timestamp, not September in
year 2010. Guard this codepath by requring an extra '@' in front of
the raw git timestamp on the parsing side. This of course needs to
be compensated by updating get_author_ident_from_commit and the code
for "git commit --amend" to prepend '@' to the string read from the
existing commit in the GIT_AUTHOR_DATE environment variable.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t0300 creates some helper shell scripts, and marks them with
"!/bin/sh". Even though the scripts are fairly simple, they
can fail on broken shells (specifically, Solaris /bin/sh
will persist a temporary assignment to IFS in a "read"
command).
Rather than work around the problem for Solaris /bin/sh,
using write_script will make sure we point to a known-good
shell that the user has given us.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many of the scripts in the test suite write small helper
shell scripts to disk. It's best if these shell scripts
start with "#!$SHELL_PATH" rather than "#!/bin/sh", because
/bin/sh on some platforms is too buggy to be used.
However, it can be cumbersome to expand $SHELL_PATH, because
the usual recipe for writing a script is:
cat >foo.sh <<-\EOF
#!/bin/sh
echo my arguments are "$@"
EOF
To expand $SHELL_PATH, you have to either interpolate the
here-doc (which would require quoting "\$@"), or split the
creation into two commands (interpolating the $SHELL_PATH
line, but not the rest of the script). Let's provide a
helper function that makes that less syntactically painful.
While we're at it, this helper can also take care of the
"chmod +x" that typically comes after the creation of such a
script, saving the caller a line.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When you specify a local repository on the command line of
clone, ls-remote, upload-pack, receive-pack, or upload-archive,
or in a request to git-daemon, we perform a little bit of
lookup magic, doing things like looking in working trees for
.git directories and appending ".git" for bare repos.
For clone, this magic happens in get_repo_path. For
everything else, it happens in enter_repo. In both cases,
there are some ambiguous or confusing cases that aren't
handled well, and there is one case that is not handled the
same by both methods.
This patch tries to provide (and test!) standard, sensible
lookup rules for both code paths. The intended changes are:
1. When looking up "foo", we have always preferred
a working tree "foo" (containing "foo/.git" over the
bare "foo.git". But we did not prefer a bare "foo" over
"foo.git". With this patch, we do so.
2. We would select directories that existed but didn't
actually look like git repositories. With this patch,
we make sure a selected directory looks like a git
repo. Not only is this more sensible in general, but it
will help anybody who is negatively affected by change
(1) negatively (e.g., if they had "foo.git" next to its
separate work tree "foo", and expect to keep finding
"foo.git" when they reference "foo").
3. The enter_repo code path would, given "foo", look for
"foo.git/.git" (i.e., do the ".git" append magic even
for a repo with working tree). The clone code path did
not; with this patch, they now behave the same.
In the unlikely case of a working tree overlaying a bare
repo (i.e., a ".git" directory _inside_ a bare repo), we
continue to treat it as a working tree (prefering the
"inner" .git over the bare repo). This is mainly because the
combination seems nonsensical, and I'd rather stick with
existing behavior on the off chance that somebody is relying
on it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is currently no way for users to tell git-grep that a
particular path is or is not a binary file; instead, grep
always relies on its auto-detection (or the user specifying
"-a" to treat all binary-looking files like text).
This patch teaches git-grep to use the same attribute lookup
that is used by git-diff. We could add a new "grep" flag,
but that is unnecessarily complex and unlikely to be useful.
Despite the name, the "-diff" attribute (or "diff=foo" and
the associated diff.foo.binary config option) are really
about describing the contents of the path. It's simply
historical that diff was the only thing that cared about
these attributes in the past.
And if this simple approach turns out to be insufficient, we
still have a backwards-compatible path forward: we can add a
separate "grep" attribute, and fall back to respecting
"diff" if it is unset.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The comment was introduced in b5d97e6 (pack-objects: run rev-list
equivalent internally. - 2006-09-04), stating that
git pack-objects [options] base-name <refs...>
is acceptable and refs should be passed into rev-list. But that's not
true. All arguments after base-name are ignored.
Remove the comment and reject this syntax (i.e. no more arguments after
base name)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* nd/clone-detached:
clone: fix up delay cloning conditions
push: do not let configured foreign-vcs permanently clobbered
clone: print advice on checking out detached HEAD
clone: allow --branch to take a tag
clone: refuse to clone if --branch points to bogus ref
clone: --branch=<branch> always means refs/heads/<branch>
clone: delay cloning until after remote HEAD checking
clone: factor out remote ref writing
clone: factor out HEAD update code
clone: factor out checkout code
clone: write detached HEAD in bare repositories
t5601: add missing && cascade
* va/git-p4-branch:
t9801: do not overuse test_must_fail
git-p4: Change p4 command invocation
git-p4: Add test case for complex branch import
git-p4: Search for parent commit on branch creation
* ld/git-p4-branches-and-labels:
git-p4: label import fails with multiple labels at the same changelist
git-p4: add test for p4 labels
git-p4: importing labels should cope with missing owner
git-p4: cope with labels with empty descriptions
git-p4: handle p4 branches and labels containing shell chars
When asking for a tag to be pulled, disambiguate by leaving tags/ prefix
in front of the name of the tag. E.g.
... in the git repository at:
git://example.com/git/git.git/ tags/v1.2.3
for you to fetch changes up to 123456...
This way, older versions of "git pull" can be used to respond to such a
request more easily, as "git pull $URL v1.2.3" did not DWIM to fetch
v1.2.3 tag in older versions. Also this makes it clearer for humans that
the pull request is made for a tag and he should anticipate a signed one.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* pw/p4-view-updates:
git-p4: add tests demonstrating spec overlay ambiguities
git-p4: adjust test to adhere to stricter useClientSpec
git-p4: clarify comment
git-p4: fix verbose comment typo
git-p4: only a single ... wildcard is supported
* cb/push-quiet:
t5541: avoid TAP test miscounting
fix push --quiet: add 'quiet' capability to receive-pack
server_supports(): parse feature list more carefully
This simplifies svn-fe a great deal and fulfills a longstanding wish:
support for dumps with deltas in them, and incremental imports.
The cost is that commandline usage of the svn-fe tool becomes a little
more complicated since it no longer keeps state itself but instead reads
blobs back from fast-import in order to copy them between revisions and
apply deltas to them.
Also removes a couple of custom data structures and replaces them with
strbufs like other parts of Git.
* 'svn-fe' of git://repo.or.cz/git/jrn: (32 commits)
vcs-svn: reset first_commit_done in fast_export_init
vcs-svn: do not initialize report_buffer twice
vcs-svn: avoid hangs from corrupt deltas
vcs-svn: guard against overflow when computing preimage length
vcs-svn: cap number of bytes read from sliding view
test-svn-fe: split off "test-svn-fe -d" into a separate function
vcs-svn: implement text-delta handling
vcs-svn: let deltas use data from preimage
vcs-svn: let deltas use data from postimage
vcs-svn: verify that deltas consume all inline data
vcs-svn: implement copyfrom_data delta instruction
vcs-svn: read instructions from deltas
vcs-svn: read inline data from deltas
vcs-svn: read the preimage when applying deltas
vcs-svn: parse svndiff0 window header
vcs-svn: skeleton of an svn delta parser
vcs-svn: make buffer_read_binary API more convenient
vcs-svn: learn to maintain a sliding view of a file
Makefile: list one vcs-svn/xdiff object or header per line
vcs-svn: avoid using ls command twice
...
Conflicts:
Makefile
contrib/svn-fe/svn-fe.txt
test_must_fail is to make sure a program we can potentially break during
the course of updating git itself exits with a non-zero status in a clean
and controlled way.
When we expect a non-zero exit status from the commands we use from the
underlying platform in tests, e.g. making sure a string "error: " does not
appear in the output by running "grep 'error: '", just use "! grep" for
readability. It is not like we will try to update Git and suddenly 'grep'
we use from the system starts segfaulting.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Check if branches created from old changelists are correctly imported.
Also included some updates to simple branch test so that both are
coherent in respect to each other.
Signed-off-by: Vitor Antunes <vitor.hda@gmail.com>
Acked-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since recently a submodule with name <name> has its git directory in the
.git/modules/<name> directory of the superproject while the work tree
contains a gitfile pointing there.
When the same submodule is added on a branch where it wasn't present so
far (it is not found in the .gitmodules file), the name is not initialized
from the path as it should. This leads to a wrong path entered in the
gitfile when the .git/modules/<name> directory is found, as this happily
uses the - now empty - name. It then always points only a single directory
up, even if we have a path deeper in the directory hierarchy.
Fix that by initializing the name of the submodule early in module_clone()
if module_name() returned an empty name and add a test to catch that bug.
Reported-by: Jehan Bing <jehan@orb.com>
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Traditionally, a cleanly resolved merge was committed by "git merge" using
the auto-generated merge commit log message without invoking the editor.
After 5 years of use in the field, it turns out that people perform too
many unjustified merges of the upstream history into their topic branches.
These merges are not just useless, but they are often not explained well,
and making the end result unreadable when it gets time for merging their
history back to their upstream.
Earlier we added the "--edit" option to the command, so that people can
edit the log message to explain and justify their merge commits. Let's
take it one step further and spawn the editor by default when we are in an
interactive session (i.e. the standard input and the standard output are
pointing at the same tty device).
There may be existing scripts that leave the standard input and the
standard output of the "git merge" connected to whatever environment the
scripts were started, and such invocation might trigger the above
"interactive session" heuristics. GIT_MERGE_AUTOEDIT environment variable
can be set to "no" at the beginning of such scripts to use the historical
behaviour while the script runs.
Note that this backward compatibility is meant only for scripts, and we
deliberately do *not* support "merge.edit = yes/no/auto" configuration
option to allow people to keep the historical behaviour.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some merge tools cannot cope when $LOCAL, $BASE, or $REMOTE are missing.
$BASE can be missing when two branches independently add the same
filename.
Provide an empty file to make these tools happy.
When a delete/modify conflict occurs, $LOCAL and $REMOTE can also be
missing. We have special case code to handle such case so this change
may not affect that codepath, but try to be consistent and create an
empty file for them anyway.
Reported-by: Jason Wenger <jcwenger@gmail.com>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In threaded mode, git-grep emits file breaks (enabled with context, -W
and --break) into the accumulation buffers even if they are not
required. The output collection thread then uses skip_first_line to
skip the first such line in the output, which would otherwise be at
the very top.
This is wrong when the user also specified -l/-L/-c, in which case
every line is relevant. While arguably giving these options together
doesn't make any sense, git-grep has always quietly accepted it. So
do not skip anything in these cases.
Signed-off-by: Albert Yale <surfingalbert@gmail.com>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Starting from GNU Make 3.82 $(wildcard ...) no longer sorts the result
(from NEWS):
* WARNING: Backward-incompatibility!
Wildcards were not documented as returning sorted values, but the results
have been sorted up until this release.. If your makefiles require sorted
results from wildcard expansions, use the $(sort ...) function to request
it explicitly.
2a59dc32aa
I usually watch test progress visually, and if tests are sorted, even
with make -j4 they go more or less incrementally by their t number. On
the other side, without sorting, tests are executed in seemingly random
order even for -j1. Let's please maintain sane tests order for perceived
prettyness.
Another note is that in GNU Make sort also works as uniq, so after sort
being removed, we might expect e.g. $(wildcard *.sh a.*) to produce
duplicates for e.g. "a.sh". From this point of view, adding sort could
be seen as hardening t/Makefile from accidentally introduced dups.
It turned out that prevous releases of GNU Make did not perform full
sort in $(wildcard), only sorting results for each pattern, that's why
explicit sort-as-uniq is relevant even for older makes.
Signed-off-by: Kirill Smelkov <kirr@navytux.spb.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-p4 has an array of changelists with one label per changelist.
But you can have multiple labels on a single changelist and so this
code fails.
Add a test case demonstrating the problem.
Signed-off-by: Luke Diamand <luke@diamand.org>
Acked-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add basic test of p4 label import. Checks label import and
import with shell metachars; labels with different length
descriptions.
Signed-off-by: Luke Diamand <luke@diamand.org>
Acked-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't use shell expansion when detecting branches, as it will
fail if the branch name contains a shell metachar. Similarly
for labels.
Add additional test for branches with shell metachars.
Signed-off-by: Luke Diamand <luke@diamand.org>
Acked-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The protocol between transport-helper.c and remote-curl requires
remote-curl to always print a blank line after the push command
has run. If the blank line is ommitted, transport-helper kills its
container process (the git push the user started) with exit(128)
and no message indicating a problem, assuming the helper already
printed reasonable error text to the console.
However if the remote rejects all branches with "ng" commands in the
report-status reply, send-pack terminates with non-zero status, and
in turn remote-curl exited with non-zero status before outputting
the blank line after the helper status printed by send-pack. No
error messages reach the user.
This caused users to see the following from git push over HTTP
when the remote side's update hook rejected the branch:
$ git push http://... master
Counting objects: 4, done.
Delta compression using up to 6 threads.
Compressing objects: 100% (2/2), done.
Writing objects: 100% (3/3), 301 bytes, done.
Total 3 (delta 0), reused 0 (delta 0)
$
Always print a blank line after the send-pack process terminates,
ensuring the helper status report (if it was output) will be
correctly parsed by the calling transport-helper.c. This ensures
the helper doesn't abort before the status report can be shown to
the user.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a topic branch workflow, you often want to find the latest commit that
merged a side branch that touched a particular area of the system, so that
a new topic branch to work on that area can be forked from that commit.
For example, I wanted to find an appropriate fork-point to queue Luke's
changes related to git-p4 in contrib/fast-import/.
"git log --first-parent" traverses the first-parent chain, and "-m --stat"
shows the list of paths touched by commits including merge commits. We
could ask the question this way:
# What is the latest commit that touched that path?
$ git log --first-parent --oneline -m --stat master |
sed -e '/^ contrib\/fast-import\/git-p4 /q' | tail
The above finds that 8cbfc11 (Merge branch 'pw/p4-view-updates',
2012-01-06) was such a commit.
But a more natural way to spell this question is this:
$ git log --first-parent --oneline -m --stat -1 master -- \
contrib/fast-import/git-p4
Unfortunately, this does not work. It finds ecb7cf9 (git-p4: rewrite view
handling, 2012-01-02). This commit is a part of the merged topic branch
and is _not_ on the first-parent path from the 'master':
$ git show-branch 8cbfc11ecb7cf9
! [8cbfc11] Merge branch 'pw/p4-view-updates'
! [ecb7cf9] git-p4: rewrite view handling
--
- [8cbfc11] Merge branch 'pw/p4-view-updates'
+ [8cbfc11^2] git-p4: view spec documentation
++ [ecb7cf9] git-p4: rewrite view handling
The problem is caused by the merge simplification logic when it inspects
the merge commit 8cbfc11. In this case, the history leading to the tip of
'master' did not touch git-p4 since 'pw/p4-view-updates' topic forked, and
the result of the merge is simply a copy from the tip of the topic branch
in the view limited by the given pathspec. The merge simplification logic
discards the history on the mainline side of the merge, and pretends as if
the sole parent of the merge is its second parent, i.e. the tip of the
topic. While this simplification is correct in the general case, it is at
least surprising if not outright wrong when the user explicitly asked to
show the first-parent history.
Here is an attempt to fix this issue, by not allowing us to compare the
merge result with anything but the first parent when --first-parent is in
effect, to avoid the history traversal veering off to the side branch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The pathspec structure has a few bits of data to drive various operation
modes after we unified the pathspec matching logic in various codepaths.
For example, max_depth field is there so that "git grep" can limit the
output for files found in limited depth of tree traversal. Also in order
to show just the surface level differences in "git diff-tree", recursive
field stops us from descending into deeper level of the tree structure
when it is set to false, and this also affects pathspec matching when
we have wildcards in the pathspec.
The diff-index has always wanted the recursive behaviour, and wanted to
match pathspecs without any depth limit. But we forgot to do so when we
updated tree_entry_interesting() logic to unify the pathspec matching
logic.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
