Normally scripts do not have to be aware about split indexes because
all shared indexes are in $GIT_DIR. A simple "mv $tmp_index
$GIT_DIR/somewhere" is enough. Scripts that generate temporary indexes
and move them across repos must be aware about split index and copy
the shared file as well. This option enables that.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you have a large work tree but only make changes in a subset, then
$GIT_DIR/index's size should be stable after a while. If you change
branches that touch something else, $GIT_DIR/index's size may grow
large that it becomes as slow as the unified index. Do --split-index
again occasionally to force all changes back to the shared index and
keep $GIT_DIR/index small.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The large part of this patch just follows CE_ENTRY_CHANGED
marks. replace_index_entry() is updated to update
split_index->base->cache[] as well so base->cache[] does not reference
to a freed entry.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Other fill_stat_cache_info() is on new entries, which should set
CE_ENTRY_ADDED in cache_changed, so we're safe.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
cache entry additions, removals and modifications are separated
out. The rest of changes are still in the catch-all flag
SOMETHING_CHANGED, which would be more specific later.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When extract l10n messages, we use "--add-comments" option to keep
comments right above the l10n messages for references. But sometimes
irrelevant comments are also extracted. For example in the following
code block, the comment in line 2 will be extracted as comment for the
l10n message in line 3, but obviously it's wrong.
{ OPTION_CALLBACK, 0, "ignore-removal", &addremove_explicit,
NULL /* takes no arguments */,
N_("ignore paths removed in the working tree (same as
--no-all)"),
PARSE_OPT_NOARG, ignore_removal_cb },
Since almost all comments for l10n translators are marked with the same
prefix (tag): "TRANSLATORS:", it's safe to only extract comments with
this special tag. I.E. it's better to call xgettext as:
xgettext --add-comments=TRANSLATORS: ...
Also tweaks the multi-line comment in "init-db.c", to make it start with
the proper tag, not "* TRANSLATORS:" (which has a star before the tag).
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Eradicate mistaken use of "nor" (that is, essentially "nor" used
not in "neither A nor B" ;-)) from in-code comments, command output
strings, and documentations.
* jl/nor-or-nand-and:
code and test: fix misuses of "nor"
comments: fix misuses of "nor"
contrib: fix misuses of "nor"
Documentation: fix misuses of "nor"
Make sure that the help text given to describe the "<param>" part
of the "git cmd --option=<param>" does not contain SP or _,
e.g. "--gpg-sign=<key-id>" option for "git commit" is not spelled
as "--gpg-sign=<key id>".
* jc/rev-parse-argh-dashed-multi-words:
parse-options: make sure argh string does not have SP or _
update-index: teach --cacheinfo a new syntax "mode,sha1,path"
parse-options: multi-word argh should use dash to separate words
When we are sending a packfile to a remote, we currently try
to reuse a whole chunk of packfile without bothering to look
at the individual objects. This can make things like initial
clones much lighter on the server, as we can just dump the
packfile bytes.
However, it's possible that the other side cannot read our
packfile verbatim. For example, we may have objects stored
as OFS_DELTA, but the client is an antique version of git
that only understands REF_DELTA. We negotiate this
capability over the fetch protocol. A normal pack-objects
run will convert OFS_DELTA into REF_DELTA on the fly, but
the "reuse pack" code path never even looks at the objects.
This patch disables packfile reuse if the other side is
missing any capabilities that we might have used in the
on-disk pack. Right now the only one is OFS_DELTA, but we
may need to expand in the future (e.g., if packv4 introduces
new object types).
We could be more thorough and only disable reuse in this
case when we actually have an OFS_DELTA to send, but:
1. We almost always will have one, since we prefer
OFS_DELTA to REF_DELTA when possible. So this case
would almost never come up.
2. Looking through the objects defeats the purpose of the
optimization, which is to do as little work as possible
to get the bytes to the remote.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow tweaking the maximum length of the delta-chain produced by
"gc --aggressive".
* nd/gc-aggressive:
environment.c: fix constness for odb_pack_keep()
gc --aggressive: make --depth configurable
Attempts to show where a single-strand-of-pearls break in "git log"
output.
* nd/log-show-linear-break:
log: add --show-linear-break to help see non-linear history
object.h: centralize object flag allocation
Signed-off-by: Aman Gupta <aman@tmm1.net>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Acked-by: Brad King <brad.king@kitware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teaches the "rev-parse --parseopt" mechanism used by scripted
Porcelains to parse command line options and give help text how to
supply argv-help (the placeholder string for an option parameter,
e.g. "key-id" in "--gpg-sign=<key-id>").
* ib/rev-parse-parseopt-argh:
t1502: protect runs of SPs used in the indentation
rev-parse --parseopt: option argument name hints
When 1c192f3 (gc --aggressive: make it really aggressive - 2007-12-06)
made --depth=250 the default value, it didn't really explain the
reason behind, especially the pros and cons of --depth=250.
An old mail from Linus below explains it at length. Long story short,
--depth=250 is a disk saver and a performance killer. Not everybody
agrees on that aggressiveness. Let the user configure it.
From: Linus Torvalds <torvalds@linux-foundation.org>
Subject: Re: [PATCH] gc --aggressive: make it really aggressive
Date: Thu, 6 Dec 2007 08:19:24 -0800 (PST)
Message-ID: <alpine.LFD.0.9999.0712060803430.13796@woody.linux-foundation.org>
Gmane-URL: http://article.gmane.org/gmane.comp.gcc.devel/94637
On Thu, 6 Dec 2007, Harvey Harrison wrote:
>
> 7:41:25elapsed 86%CPU
Heh. And this is why you want to do it exactly *once*, and then just
export the end result for others ;)
> -r--r--r-- 1 hharrison hharrison 324094684 2007-12-06 07:26 pack-1d46...pack
But yeah, especially if you allow longer delta chains, the end result can
be much smaller (and what makes the one-time repack more expensive is the
window size, not the delta chain - you could make the delta chains longer
with no cost overhead at packing time)
HOWEVER.
The longer delta chains do make it potentially much more expensive to then
use old history. So there's a trade-off. And quite frankly, a delta depth
of 250 is likely going to cause overflows in the delta cache (which is
only 256 entries in size *and* it's a hash, so it's going to start having
hash conflicts long before hitting the 250 depth limit).
So when I said "--depth=250 --window=250", I chose those numbers more as
an example of extremely aggressive packing, and I'm not at all sure that
the end result is necessarily wonderfully usable. It's going to save disk
space (and network bandwidth - the delta's will be re-used for the network
protocol too!), but there are definitely downsides too, and using long
delta chains may simply not be worth it in practice.
(And some of it might just want to have git tuning, ie if people think
that long deltas are worth it, we could easily just expand on the delta
hash, at the cost of some more memory used!)
That said, the good news is that working with *new* history will not be
affected negatively, and if you want to be _really_ sneaky, there are ways
to say "create a pack that contains the history up to a version one year
ago, and be very aggressive about those old versions that we still want to
have around, but do a separate pack for newer stuff using less aggressive
parameters"
So this is something that can be tweaked, although we don't really have
any really nice interfaces for stuff like that (ie the git delta cache
size is hardcoded in the sources and cannot be set in the config file, and
the "pack old history more aggressively" involves some manual scripting
and knowing how "git pack-objects" works rather than any nice simple
command line switch).
So the thing to take away from this is:
- git is certainly flexible as hell
- .. but to get the full power you may need to tweak things
- .. happily you really only need to have one person to do the tweaking,
and the tweaked end results will be available to others that do not
need to know/care.
And whether the difference between 320MB and 500MB is worth any really
involved tweaking (considering the potential downsides), I really don't
know. Only testing will tell.
Linus
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When it is not necessary to edit a commit log message (e.g. "git
commit -m" is given a message without specifying "-e"), we used to
disable the spawning of the editor by overriding GIT_EDITOR, but
this means all the uses of the editor, other than to edit the
commit log message, are also affected.
* bp/commit-p-editor:
run-command: mark run_hook_with_custom_index as deprecated
merge hook tests: fix and update tests
merge: fix GIT_EDITOR override for commit hook
commit: fix patch hunk editing with "commit -p -m"
test patch hunk editing with "commit -p -m"
merge hook tests: use 'test_must_fail' instead of '!'
merge hook tests: fix missing '&&' in test
The progress output while repacking and transferring objects showed
an apparent large silence while writing the objects out of existing
packfiles, when the reachability bitmap was in use.
* jk/pack-bitmap-progress:
pack-objects: show reused packfile objects in "Counting objects"
pack-objects: show progress for reused packfiles
Instead of dying when asked to (re)pack with the reachability
bitmap when a bitmap cannot be built, just (re)pack without
producing a bitmap in such a case, with a warning.
* jk/pack-bitmap:
pack-objects: turn off bitmaps when skipping objects
While the field "flags" is mainly used by the revision walker, it is
also used in many other places. Centralize the whole flag allocation to
one place for a better overview (and easier to move flags if we have
too).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git commit --cleanup=<mode>" learned a new mode, scissors.
* nd/commit-editor-cleanup:
commit: add --cleanup=scissors
wt-status.c: move cut-line print code out to wt_status_add_cut_line
wt-status.c: make cut_line[] const to shrink .data section a bit
* jk/warn-on-object-refname-ambiguity:
rev-list: disable object/refname ambiguity check with --stdin
cat-file: restore warn_on_object_refname_ambiguity flag
cat-file: fix a minor memory leak in batch_objects
cat-file: refactor error handling of batch_objects
"git mv" that moves a submodule forgot to adjust the array that uses
to keep track of which submodules were to be moved to update its
configuration.
* jk/mv-submodules-fix:
mv: prevent mismatched data when ignoring errors.
builtin/mv: fix out of bounds write
The "--cacheinfo" option is unusual in that it takes three option
parameters. An option with an optional parameter is bad enough. An
option with multiple parameters is simply insane.
Introduce a new syntax that takes these three things concatenated
together with a comma, which makes the command line syntax more
uniform across subcommands, while retaining the traditional syntax
for backward compatiblity.
If we were designing the "update-index" subcommand from scratch
today, it may probably have made sense to make this option (and
possibly others) a command mode option that does not take any option
parameter (hence no need for arg-help). But we do not live in such
an ideal world, and as far as I can tell, the command still supports
(and must support) mixed command modes in a single invocation, e.g.
$ git update-index path1 --add path2 \
--cacheinfo 100644 $(git hash-object --stdin -w <path3) path3 \
path4
must make sure path1 is already in the index and update all of these
four paths. So this is probably as far as we can go to fix this issue
without risking to break people's existing scripts.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"When you need to use space, use dash" is a strange way to say that
you must not use a space. Because it is more common for the command
line descriptions to use dashed-multi-words, you do not even want to
use spaces in these places. Rephrase the documentation to avoid
this strangeness.
Fix a few existing multi-word argument help strings, i.e.
- GPG key-ids given to -S/--gpg-sign are "key-id";
- Refs used for storing notes are "notes-ref"; and
- Expiry timestamps given to --expire are "expiry-date".
and update the corresponding documentation pages.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Built-in commands can specify names for option arguments when usage text
is generated for a command. sh based commands should be able to do the
same.
Option argument name hint is any text that comes after [*=?!] after the
argument name up to the first whitespace.
Signed-off-by: Ilya Bobyr <ilya.bobyr@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Serving objects from a shallow repository needs to write a
temporary file to be used, but the serving upload-pack may not have
write access to the repository which is meant to be read-only.
Instead feed these temporary shallow bounds from the standard input
of pack-objects so that we do not have to use a temporary file.
* nd/upload-pack-shallow:
upload-pack: send shallow info over stdin to pack-objects
Serving objects from a shallow repository needs to write a
new file to hold the temporary shallow boundaries but it was not
cleaned when we exit due to die() or a signal.
* jk/shallow-update-fix:
shallow: verify shallow file after taking lock
shallow: automatically clean up shallow tempfiles
shallow: use stat_validity to check for up-to-date file
"git clean -d pathspec" did not use the given pathspec correctly
and ended up cleaning too much.
* jk/clean-d-pathspec:
clean: simplify dir/not-dir logic
clean: respect pathspecs with "-d"
"git reset" needs to refresh the index when working in a working
tree (it can also be used to match the index to the HEAD in an
otherwise bare repository), but it failed to set up the working
tree properly, causing GIT_WORK_TREE to be ignored.
* nd/reset-setup-worktree:
reset: optionally setup worktree and refresh index on --mixed
"git check-attr" when working on a repository with a working tree
did not work well when the working tree was specified via the
--work-tree (and obviously with --git-dir) option.
* jc/check-attr-honor-working-tree:
check-attr: move to the top of working tree when in non-bare repository
t0003: do not chdir the whole test process
"git rev-parse" was loose in rejecting command line arguments that
do not make sense, e.g. "--default" without the required value for
that option.
* ds/rev-parse-required-args:
rev-parse: check i before using argv[i] against argc
Allow "git cmd path/", when the 'path' is where a submodule is
bound to the top-level working tree, to match 'path', despite the
extra and unnecessary trailing slash (such a slash is often
given by command line completion).
* nd/submodule-pathspec-ending-with-slash:
clean: use cache_name_is_other()
clean: replace match_pathspec() with dir_path_match()
pathspec: pass directory indicator to match_pathspec_item()
match_pathspec: match pathspec "foo/" against directory "foo"
dir.c: prepare match_pathspec_item for taking more flags
pathspec: rename match_pathspec_depth() to match_pathspec()
pathspec: convert some match_pathspec_depth() to dir_path_match()
pathspec: convert some match_pathspec_depth() to ce_path_match()
Replace open-coded reallocation with ALLOC_GROW() macro.
* dd/use-alloc-grow:
sha1_file.c: use ALLOC_GROW() in pretend_sha1_file()
read-cache.c: use ALLOC_GROW() in add_index_entry()
builtin/mktree.c: use ALLOC_GROW() in append_to_tree()
attr.c: use ALLOC_GROW() in handle_attr_line()
dir.c: use ALLOC_GROW() in create_simplify()
reflog-walk.c: use ALLOC_GROW()
replace_object.c: use ALLOC_GROW() in register_replace_object()
patch-ids.c: use ALLOC_GROW() in add_commit()
diffcore-rename.c: use ALLOC_GROW()
diff.c: use ALLOC_GROW()
commit.c: use ALLOC_GROW() in register_commit_graft()
cache-tree.c: use ALLOC_GROW() in find_subtree()
bundle.c: use ALLOC_GROW() in add_to_ref_list()
builtin/pack-objects.c: use ALLOC_GROW() in check_pbase_path()
"git clean -d pathspec" did not use the given pathspec correctly
and ended up cleaning too much.
* jk/clean-d-pathspec:
clean: simplify dir/not-dir logic
clean: respect pathspecs with "-d"
run_add_interactive() in builtin/add.c manually computes array bounds
and allocates a static args array to build the add--interactive command
line, which is error-prone. Use the argv-array helper functions instead.
Signed-off-by: Fabian Ruch <bafain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't set GIT_EDITOR to ":" when calling prepare-commit-msg hook if the
editor is going to be called (e.g. with "merge -e").
Signed-off-by: Benoit Pierre <benoit.pierre@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't change git environment: move the GIT_EDITOR=":" override to the
hook command subprocess, like it's already done for GIT_INDEX_FILE.
Signed-off-by: Benoit Pierre <benoit.pierre@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
