When testing a reworded root commit, ensure that the squash-onto commit
which is created and amended is still the root commit.
Suggested-by: Phillip Wood <phillip.wood@talktalk.net>
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code path that triggered that "BUG" really does not want to run
without an explicit commit message. In the case where we want to amend a
commit message, we have an *implicit* commit message, though: the one of
the commit to amend. Therefore, this code path should not even be
entered.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When splitting a repository, running `git rebase -i --root` to reword
the initial commit, Git dies with
BUG: sequencer.c:795: root commit without message.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In this developer's earlier attempt to accelerate interactive rebases by
converting large parts from Unix shell script into portable, performant
C, the --root handling was specifically excluded (to simplify the task a
little bit; it still took over a year to get that reduced set of patches
into Git proper).
This patch ties up that loose end: now only --preserve-merges uses the
slow Unix shell script implementation to perform the interactive rebase.
As the rebase--helper reports progress to stderr (unlike the scripted
interactive rebase, which reports it to stdout, of all places), we have
to adjust a couple of tests that did not expect that for `git rebase -i
--root`.
This patch fixes -- at long last! -- the really old bug reported in
6a6bc5bdc4 (add tests for rebasing root, 2013-06-06) that rebasing with
--root *always* rewrote the root commit, even if there were no changes.
The bug still persists in --preserve-merges mode, of course, but that
mode will be deprecated as soon as the new --rebase-merges mode
stabilizes, anyway.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Small test-helper programs have been consolidated into a single
binary.
* nd/combined-test-helper: (36 commits)
t/helper: merge test-write-cache into test-tool
t/helper: merge test-wildmatch into test-tool
t/helper: merge test-urlmatch-normalization into test-tool
t/helper: merge test-subprocess into test-tool
t/helper: merge test-submodule-config into test-tool
t/helper: merge test-string-list into test-tool
t/helper: merge test-strcmp-offset into test-tool
t/helper: merge test-sigchain into test-tool
t/helper: merge test-sha1-array into test-tool
t/helper: merge test-scrap-cache-tree into test-tool
t/helper: merge test-run-command into test-tool
t/helper: merge test-revision-walking into test-tool
t/helper: merge test-regex into test-tool
t/helper: merge test-ref-store into test-tool
t/helper: merge test-read-cache into test-tool
t/helper: merge test-prio-queue into test-tool
t/helper: merge test-path-utils into test-tool
t/helper: merge test-online-cpus into test-tool
t/helper: merge test-mktemp into test-tool
t/helper: merge (unused) test-mergesort into test-tool
...
"git tag --contains no-such-commit" gave a full list of options
after giving an error message.
* ps/contains-id-error-message:
parse-options: do not show usage upon invalid option value
Compared to 'test-chmtime -v +0 file' which prints the mtime and
and the file name, 'test-chmtime --get file' displays only the mtime.
If it is used in combination with (+|=|=+|=-|-)seconds, it changes
and prints the new value.
test-chmtime -v +0 file | sed 's/[^0-9].*$//'
is now equivalent to:
test-chmtime --get file
Signed-off-by: Paul-Sebastian Ungureanu <ungureanupaulsebastian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Usually, the usage should be shown only if the user does not know what
options are available. If the user specifies an invalid value, the user
is already aware of the available options. In this case, there is no
point in displaying the usage anymore.
This patch applies to "git tag --contains", "git branch --contains",
"git branch --points-at", "git for-each-ref --contains" and many more.
Signed-off-by: Paul-Sebastian Ungureanu <ungureanupaulsebastian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new "--show-current-patch" option gives an end-user facing way
to get the diff being applied when "git rebase" (and "git am")
stops with a conflict.
* nd/rebase-show-current-patch:
rebase: introduce and use pseudo-ref REBASE_HEAD
rebase: add --show-current-patch
am: add --show-current-patch
The sequencer infrastructure is shared across "git cherry-pick",
"git rebase -i", etc., and has always spawned "git commit" when it
needs to create a commit. It has been taught to do so internally,
when able, by reusing the codepath "git commit" itself uses, which
gives performance boost for a few tens of percents in some sample
scenarios.
* pw/sequencer-in-process-commit:
sequencer: run 'prepare-commit-msg' hook
t7505: add tests for cherry-pick and rebase -i/-p
t7505: style fixes
sequencer: assign only free()able strings to gpg_sign
sequencer: improve config handling
t3512/t3513: remove KNOWN_FAILURE_CHERRY_PICK_SEES_EMPTY_COMMIT=1
sequencer: try to commit without forking 'git commit'
sequencer: load commit related config
sequencer: simplify adding Signed-off-by: trailer
commit: move print_commit_summary() to libgit
commit: move post-rewrite code to libgit
Add a function to update HEAD after creating a commit
commit: move empty message checks to libgit
t3404: check intermediate squash messages
The new command `git rebase --show-current-patch` is useful for seeing
the commit related to the current rebase state. Some however may find
the "git show" command behind it too limiting. You may want to
increase context lines, do a diff that ignores whitespaces...
For these advanced use cases, the user can execute any command they
want with the new pseudo ref REBASE_HEAD.
This also helps show where the stopped commit is from, which is hard
to see from the previous patch which implements --show-current-patch.
Helped-by: Tim Landscheidt <tim@tim-landscheidt.de>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is useful to see the full patch while resolving conflicts in a
rebase. The only way to do it now is
less .git/rebase-*/patch
which could turn out to be a lot longer to type if you are in a
linked worktree, or not at top-dir. On top of that, an ordinary user
should not need to peek into .git directory. The new option is
provided to examine the patch.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The gpg_sign member of the replay_opts structure is of type `char *`,
meaning that the sequencer deems the string to which gpg_sign points to
be under its custody, i.e. it needs to be free()d by the sequencer.
Therefore, let's only assign malloc()ed buffers to it.
Reported-by: Kaartic Sivaraam <kaartic.sivaraam@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make sure the todo list ends up using single-letter command
abbreviations when the rebase.abbreviateCommands is enabled.
This configuration option should not change anything else.
Signed-off-by: Liam Beguin <liambeguin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When there is more than one squash/fixup command in a row check the
intermediate messages are correct.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A recent regression in "git rebase -i" that broke execution of git
commands from subdirectories via "exec" insn has been fixed.
* jk/rebase-i-exec-gitdir-fix:
sequencer: pass absolute GIT_DIR to exec commands
When we replaced the old shell script based interactive rebase in
commmit 18633e1a22 ("rebase -i: use the rebase--helper builtin",
2017-02-09) we introduced a regression of functionality in that the
GIT_DIR would be sent to the environment of the exec command as-is.
This generally meant that it would be passed as "GIT_DIR=.git", which
causes problems for any exec command that wants to run git commands in
a subdirectory.
This isn't a very large regression, since it is not that likely that the
exec command will run a git command, and even less likely that it will
need to do so in a subdir. This regression was discovered by a build
system which uses git-describe to find the current version of the build
system, and happened to do so from the src/ sub directory of the
project.
Fix this by passing in the absolute path of the git directory into the
child environment.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These tests were a bit anal about the *exact* warning/error message
printed by git rebase. But those messages are intended for the *end
user*, therefore it does not make sense to test so rigidly for the
*exact* wording.
In the following, we will reimplement the missing commits check in
the sequencer, with slightly different words.
So let's just test for the parts in the warning/error message that
we *really* care about, nothing more, nothing less.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a recent regression to "git rebase -i" and add tests that would
have caught it and others.
* pw/rebase-i-regression-fix-tests:
t3420: fix under GETTEXT_POISON build
rebase: add more regression tests for console output
rebase: add regression tests for console output
rebase -i: add test for reflog message
sequencer: print autostash messages to stderr
Check that the reflog message written to the branch reflog when the
rebase is completed is correct
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The GETTEXT_POISON=YesPlease compile-time testing option added in my
bb946bba76 ("i18n: add GETTEXT_POISON to simulate unfriendly
translator", 2011-02-22) has been slowly bitrotting as strings have
been marked for translation, and new tests have been added without
running it.
I brought this up on the list ("[BUG] test suite broken with
GETTEXT_POISON=YesPlease", [1]) asking whether this mode was useful at
all anymore. At least one person occasionally uses it, and Lars
Schneider offered to change one of the the Travis builds to run in
this mode, so fix up the failing ones.
My test setup runs most of the tests, with the notable exception of
skipping all the p4 tests, so it's possible that there's still some
lurking regressions I haven't fixed.
1. <CACBZZX62+acvi1dpkknadTL827mtCm_QesGSZ=6+UnyeMpg8+Q@mail.gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that the sequencer learned to process a "normal" interactive rebase,
we use it. The original shell script is still used for "non-normal"
interactive rebases, i.e. when --root or --preserve-merges was passed.
Please note that the --root option (via the $squash_onto variable) needs
special handling only for the very first command, hence it is still okay
to use the helper upon continue/skip.
Also please note that the --no-ff setting is volatile, i.e. when the
interactive rebase is interrupted at any stage, there is no record of
it. Therefore, we have to pass it from the shell script to the
rebase--helper.
Note: the test t3404 had to be adjusted because the the error messages
produced by the sequencer comply with our current convention to start with
a lower-case letter.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rather than abusing a strbuf to come up with an environment block,
let's just use the argv_array structure which serves the same
purpose much better.
While at it, rename the function to reflect the fact that it does
not really care exactly what environment variables are defined in
said file.
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rebase -i" did not work well with core.commentchar
configuration variable for two reasons, both of which have been
fixed.
* js/rebase-i-commentchar-fix:
rebase -i: handle core.commentChar=auto
stripspace: respect repository config
rebase -i: highlight problems with core.commentchar
When 84c9dc2 (commit: allow core.commentChar=auto for character auto
selection, 2014-05-17) extended the core.commentChar functionality to
allow for the value 'auto', it forgot that rebase -i was already taught to
handle core.commentChar, and in turn forgot to let rebase -i handle that
new value gracefully.
Reported by Taufiq Hoven.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The interactive rebase does not currently play well with
core.commentchar. Let's add some tests to highlight those problems
that will be fixed in the remainder of the series.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we found bad instruction lines in the instruction sheet
of interactive rebase, we give the user advice on how to
fix it. However, we don't tell the user what to do afterwards.
Give the user advice to run 'git rebase --continue' after
the fix.
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The concerned test greps the output of exit_with_patch() in
git-rebase--interactive.sh script.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A few tests that specifically target "git rebase -i" have been
added.
* js/rebase-i-tests:
rebase -i: we allow extra spaces after fixup!/squash!
rebase -i: demonstrate a bug with --autosquash
t3404: add a test for the --gpg-sign option
For the upcoming rebase--helper work (which will accelerate the
interactive rebase noticably), it is important to verify that the
--gpg-sign option is handled properly.
Please note that this patch does this on the cheap, by verifying that
the expected option is printed in the message of the 'edit' operation.
We really should test that the interactive rebase signs the commits
properly, iff GPG is available. This test is left for later.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use functions test_i18ncmp and test_i18ngrep to successfully pass tests
running under GETTEXT_POISON.
The output strings compared to in these test were marked for translation
in ed47fdf ("i18n: unpack-trees: mark strings for translation",
2016-04-09) and later improved in 2e3926b ("i18n: unpack-trees: avoid
substituting only a verb in sentences", 2016-05-12).
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use pipe to send gettext output to git stripspace instead of the
original method of using shell here-document, because command
substitution '$(...)' would not take place inside the here-documents.
The exception is the case of the last here-document redirecting to cat,
in which commands substitution works and, thus, is preserved in this
commit.
t3404: adapt test to the strings newly marked for translation
Test t3404-rebase-interactive.sh would fail under GETTEXT_POISON unless
using test_i18ngrep.
Add eval_ngettext fallback functions to be called when running, for
instance, under GETTEXT_POISON. Otherwise, tests would fail under
GETTEXT_POISON, or other build that doesn't support the GNU gettext,
because that function could not be found.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test uses hardcoded #!/bin/sh to create a pre-commit hook
script. Because the generated script uses $(command substitution),
which is not supported by /bin/sh on some platforms (e.g. Solaris),
the resulting pre-commit always fails.
Which is not noticeable as the test that uses the hook is about
checking the behaviour of the command when the hook fails ;-), but
nevertheless it is not testing what we wanted to test.
Use write_script so that the resulting script is run under the same
shell our scripted Porcelain commands are run, which must support
the necessary $(construct).
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the later steps of preparing a patch series I do not want to
edit or reorder the patches any more, but just make sure the
test suite passes after each patch and also to fix breakage
right there if some of the steps fail. I could run
EDITOR=true git rebase -i <anchor> -x "make test"
but it would be simpler if it can be spelled like so:
git rebase <anchor> -x "make test"
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user explicitly specified a merge strategy or strategy
options, continue to use that strategy/option after
"rebase --continue". Add a test of the corrected behavior.
If --merge is specified or implied by -s or -X, then "strategy and
"strategy_opts" are set to values from which "strategy_args" can be
derived; otherwise they are set to empty strings. Either way,
their values are propagated from one step of an interactive rebase
to the next via state files.
"do_merge", on the other hand, is *not* propagated to later steps of
an interactive rebase. Therefore, making the initialization of
"strategy_args" conditional on "do_merge" being set prevents later
steps of an interactive rebase from setting it correctly.
Luckily, we don't need the "do_merge" guard at all. If the rebase
was started without --merge, then "strategy" and "strategy_opts"
are both the empty string, which results in "strategy_args" also
being set to the empty string, which is just what we want in that
situation. So remove the "do_merge" guard and derive
"strategy_args" from "strategy" and "strategy_opts" every time.
Reported-by: Diogo de Campos <campos@esss.com.br>
Signed-off-by: Fabian Ruch <bafain@gmail.com>
Helped-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As CodingGuidelines says, some versions of bash errors out when
$variable substitution is used as the target for redirection without
being quoted (even though POSIX may not require such a quote).
Signed-off-by: Charles Bailey <cbailey32@bloomberg.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recent update to "rebase -i" that tries to sanity check the edited
insn sheet before it uses it has become too picky on Windows where
CRLF left by the editor is turned into a trailing CR on the line
read via the "read" built-in command.
* gr/rebase-i-drop-warn:
rebase-i: work around Windows CRLF line endings
t3404: "rebase -i" gets broken when insn sheet uses CR/LF line endings
Editors on Windows can and do save text files with CRLF line
endings, which is the convention on the platform. We are seeing
reports that the "read" command in a port of bash to the environment
however does not strip the CRLF at the end, not adjusting for the
same convention on the platform.
This breaks the recently added sanity checks for the insn sheet fed
to "rebase -i"; instead of an empty line (hence nothing in $command),
the script was getting a lone CR in there.
Special case a lone CR and treat it the same way as an empty line to
work this around.
This patch (also) passes the test with Git for Windows, where the
issue was seen first.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rebase -i" had a minor regression recently, which stopped
considering a line that begins with an indented '#' in its insn
sheet not a comment, which is now fixed.
* gr/rebase-i-drop-warn:
rebase-i: loosen over-eager check_bad_cmd check
rebase-i: explicitly accept tab as separator in commands
804098bb (git rebase -i: add static check for commands and SHA-1,
2015-06-29) tried to check all insns before running any in the todo
list, but it did so by implementing its own parser that is a lot
stricter than necessary. We used to allow lines that are indented
(including comment lines), and we used to allow a whitespace between
the insn and the commit object name to be HT, among other things,
that are flagged as an invalid line by mistake.
Fix this by using the same tokenizer that is used to parse the todo
list file in the new check.
Whether it's a good thing to accept indented comments is
debatable (other commands like "git commit" do not accept them), but we
already accepted them in the past, and some people and scripts rely on
this behavior. Also, a line starting with space followed by a '#' cannot
have any meaning other than being a comment, hence it doesn't harm to
accept them as comments.
Largely based on patch by: Junio C Hamano <gitster@pobox.com>
[jc: updated test with quickfix from Torsten Bögershausen]
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tests that assume how reflogs are represented on the filesystem too
much have been corrected.
* dt/reflog-tests:
tests: remove some direct access to .git/logs
t/t7509: remove unnecessary manipulation of reflog
