Adjust the main Makefile so you can simply run
make gitweb
which in turn calls gitweb/Makefile. This means that in order to
generate gitweb, you can simply run 'make' from gitweb subdirectory:
cd gitweb
make
Targets gitweb/gitweb.cgi and (dependent on JSMIN being defined)
gitweb/gitweb.min.js in main Makefile are preserved for backward
compatibility.
Signed-off-by: John 'Warthog9' Hawley <warthog9@kernel.org>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This changes slightly the behavior of gitweb, so that it verifies
that the box isn't inundated with before attempting to serve gitweb.
If the box is overloaded, it basically returns a 503 Server Unavailable
until the load falls below the defined threshold. This helps dramatically
if you have a box that's I/O bound, reaches a certain load and you
don't want gitweb, the I/O hog that it is, increasing the pain the
server is already undergoing.
This behavior is controlled by $maxload configuration variable.
Default is a load of 300, which for most cases should never be hit.
Unset it (set it to undefined value, i.e. undef) to turn off checking.
Currently it requires that '/proc/loadavg' file exists, otherwise the
load check is bypassed (load is taken to be 0). So platforms that do
not implement '/proc/loadavg' currently cannot use this feature
(provisions are included for additional checks to be added by others).
There is simple test in t/t9501-gitweb-standalone-http-status.sh to
check that it correctly returns "503 Service Unavailable" if load is
too high, and also if there are any Perl warnings or errors.
Signed-off-by: John 'Warthog9' Hawley <warthog9@kernel.org>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove test_debug lines after 'snapshots: tgz only default format
enabled' and 'snapshots: all enabled in default, use default disabled
value' tests. Those tests constitute of multiple gitweb_run
invocation, therefore outputting gitweb.output for the last gitweb_run
wouldn't help much in debugging test failure, and can only confuse.
For snapshot tests which check for "200 OK" status, change
test_debug 'cat gitweb.output'
to
test_debug 'cat gitweb.headers'
Otherwise when running this test with '--debug' option,
t/t9501-gitweb-standalone-http-status.sh would dump *binary data* (the
snapshot itself) to standard output, which can mess up state of terminal
due to term control characters which can be embedded in output.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even when the environment was given for the top-level process, checking
in the submodule work tree should use the index file associated with the
work tree of the submodule. Do not export it to the environment.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The files in /usr/lib/python* are only the support infrastructure for
foreign scm interface yet to be written and/or shipped with git. Don't
include them in the binary package (this will also free us from Python
dependency).
When we ship with foreign scm interface, we will need to package these
files with it in a separate subpackage, but we are not there yet.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We duplicate the grep_opt structure when using grep threads, but didn't
later free either the patterns attached to this new structure or the
structure itself.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This regression was introduced by commit 0aa958d (rebase: replace
antiquated sed invocation, 2010-01-24), which changed the invocation of
"git rev-list | sed" to "git log".
It can be reproduced by something like this:
$ git rebase -s recursive origin/master
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously we ran shortlog on the start commit which always printed
"(1)" after the start commit, which gives no information, but makes the
output less easy to read. Instead of giving the author name of the
commit, use the space for committer timestamp to help recipient judge
the freshness of the offered branch more easily.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The old "advice" message explained how to create a branch after going into
a detached HEAD state but didn't make it clear why the user may want to do
so. Also "moving to ... which isn't a local branch" was unclear if it is
complaining, if it is describing the new state, or if it is explaining why
the HEAD is detached (the true reason is the last one).
Give the established phrase 'detached HEAD' first to make it easy for
users to look up the concept in documentation, and briefly describe what
can be done in the state (i.e. play around without having to clean up)
before telling the user how to keep what was done during the temporary
state.
Allow the long description to be hidden by setting advice.detachedHead
configuration to false.
We might want to customize the advice depending on how the commit to check
out was spelled (e.g. instead of "new-branch-name", we way want to say
"topic" when "git checkout origin/topic" triggered this message) in later
updates, but this encapsulates that into a separate function and it should
be a good first step.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
See http://www.cse.wustl.edu/~schmidt/win32-cv-1.html, section "The
SignalObjectAndWait solution". But note that this implementation does not
use SignalObjectAndWait (which is needed to achieve fairness, but we do
not need fairness).
Note that our implementations of pthread_cond_broadcast and
pthread_cond_signal require that they are invoked with the mutex held that
is used in the pthread_cond_wait calls.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In contrast to GIT_SSH, SVN_SSH requires quotes for paths that contain
spaces. As GIT_SSH will not work if it contains quotes, it is safe to
assume it never contains quotes. Also, adding quotes to SVN_SSH for paths
that do not contain spaces does no harm. So we always add quotes when
deriving SVN_SSH from GIT_SSH on msys.
This fixes msysGit issue 385, see
http://code.google.com/p/msysgit/issues/detail?id=385
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even though this script is expected to be sourced instead of
executed on its own, the #!/bin/sh line provides simple
documentation about what format the file is in.
In particular, the lack of such a line was confusing the
valgrind support of our test scripts, which assumed that any
executable without a #!-line should be intercepted and run
through valgrind. So during valgrind-enabled tests, any
script sourcing this file actually sourced the valgrind
interception script instead.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Caught by valgrind in t5516. Reading the code shows we
malloc enough for our string, but not trailing NUL.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Caught by valgrind in t5500, but it is pretty obvious from
reading the code that this is shifting elements of an array
to the left, which needs memmove.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The shortcut was not properly recognized previously.
Signed-off-by: Heiko Voigt <heiko.voigt@mahr.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Emmanuel Trillaud <etrillaud@gmail.com>
Signed-off-by: Thomas Moulard <thomas.moulard@gmail.com>
Signed-off-by: Guy Brand <gb@unistra.fr>
Signed-off-by: Nicolas Sebrecht <nicolas.s.dev@gmx.fr>
Signed-off-by: Paul Mackerras <paulus@samba.org>
In do_git_gui the path of the git executable has to be put into a
list, otherwise calling it will fail when when spaces are present
in its path.
Reported-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
... and it will offer refs unless after -m or -F, because these two
options require a non-ref argument.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add tests to make sure that:
1) a submodule can be removed and its content replaced with regular files
('rewrite submodule with another content'). This test passes only with
the previous patch applied.
2) it is possible to replace submodule revision by direct index
manipulation ('replace submodule revision'). Although it would be
better to run such a filter in --index-filter, this test shows that
this functionality is not broken by the previous patch. This succeeds
both with and without the previous patch.
Signed-off-by: Michal Sojka <sojkam1@fel.cvut.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When git filter-branch is used to replace a submodule with another
content, it always fails on the first commit.
Consider a repository with submod directory containing a submodule. The
following command to remove the submodule and replace it with a file fails:
git filter-branch --tree-filter 'rm -rf submod &&
git rm -q submod &&
mkdir submod &&
touch submod/file'
with an error:
error: submod: is a directory - add files inside instead
The reason is that git diff-index, which generates the first part of the
list of files updated by the tree filter, emits also the removed submodule
even if it was replaced by a real directory.
Signed-off-by: Michal Sojka <sojkam1@fel.cvut.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since commits a2d725b7 (Use an external program to implement fetching
with curl, 2009-08-05) and c9e388bb (Make the
"traditionally-supported" URLs a special case, 2009-09-03) remote
transport helpers like 'remote-ftp' and 'remote-curl' are offered by the
completion script as available subcommands. Not good, since they are
helpers, therefore should not be offered, so filter them out.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Something like foo@{-1} is nonsensical, as the @{-N} syntax
is reserved for "the Nth last branch", and is not an actual
reflog selector. We should not feed such nonsense to
approxidate at all.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously interpret_branch_name would see @{-1} and stop
parsing, leaving the @{u} as cruft that provoked an error.
Instead, we should recurse if there is more to parse.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that we have several different types of @{} syntax, it
is a good idea to test them together, which reveals some
failures.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This was caused by a typo in the sizeof parameter, and meant
we looked at uninitialized memory. Caught by valgrind in
t2030.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The original version used relative approxidates, which don't
reproduce as reliably as absolute ones. Commit 6c647a fixed
this for one case, but missed the "silly" case.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"diff --cc" output t4038 tests was fixed by b810cbb (diff --cc: a lost
line at the beginning of the file is shown incorrectly, 2009-07-22), which
was actually the commit that introduced this test..
An error in "git merge -s resolve" t6035 tests was fixed by 730f728
(unpack-trees.c: look ahead in the index, 2009-09-20).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch enables the use of themed Tk widgets with Tk 8.5 and above.
These make a significant difference on Windows in making the
application appear native. On Windows and MacOSX ttk defaults to the
native look as much as possible. On X11 the user may select a theme
using the TkTheme XRDB resource class by adding an line to the
.Xresources file. The set of installed theme names is available using
the Tk command 'ttk::themes'. The default on X11 is similar to the current
un-themed style - a kind of thin bordered motif look.
A new git config variable 'gui.usettk' may be set to disable this if
the user prefers the classic Tk look. Using Tk 8.4 will also avoid the
use of themed widgets as these are only available since 8.5.
Some support is included for Tk 8.6 features (themed spinbox and native
font chooser for MacOSX and Windows).
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* jc/maint-reflog-bad-timestamp:
t0101: use a fixed timestamp when searching in the reflog
Update @{bogus.timestamp} fix not to die()
approxidate_careful() reports errorneous date string
At the beginning of the function we make sure remote is not NULL, and
the remainder of the funciton already depends on it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
remote.<remote>.vcs causes remote->foreign_vcs to be set on entry to
transport_get(). Unfortunately, the code assumed that any such entry
is stale from previous round.
Fix this by making VCS set by URL to be volatile w.r.t. transport_get()
instead.
Signed-off-by: Ilari Liusvaara <ilari.liusvaara@elisanet.fi>
Acked-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
