The reflog message created when "git cherry-pick" fast-forwarded
did not say anything but "cherry-pick", but it now says
"cherry-pick: fast-forward".
* rr/cherry-pick-fast-forward-reflog-message:
sequencer: write useful reflog message for fast-forward
Logic used by git-send-email to suppress cc mishandled names that
need RFC2047 quoting.
* mt/send-email-cc-match-fix:
send-email: sanitize author when writing From line
send-email: add test for duplicate utf8 name
"git pull" into nothing trashed "local changes" that were in the
index, and this avoids it.
* jk/pull-into-dirty-unborn:
pull: merge into unborn by fast-forwarding from empty tree
pull: update unborn branch tip after index
Older cURL wanted piece of memory we call it with to be stable, but
we updated the auth material after handing it to a call.
* bc/http-keep-memory-given-to-curl:
http.c: don't rewrite the user:passwd string multiple times
Plug a small leak in checkout.
* bc/checkout-tracking-name-plug-leak:
t/t9802: explicitly name the upstream branch to use as a base
builtin/checkout.c: don't leak memory in check_tracking_name
Finishing touches for the "git rebase --autostash" feature
introduced earlier.
* rr/rebase-stash-store:
rebase: use 'git stash store' to simplify logic
stash: introduce 'git stash store'
stash: simplify option parser for create
stash doc: document short form -p in synopsis
stash doc: add a warning about using create
In rebase -i --autosquash, ignore all "fixup! " or "squash! " after the
first. This supports the case when a git commit --fixup/--squash referred
to an earlier fixup/squash instead of the original commit (whether
intentionally, as when the user expressly meant to note that the commit
fixes an earlier fixup; or inadvertently, as when the user meant to refer to
the original commit with :/msg; or out of laziness, as when the user could
remember how to refer to the fixup but not the original).
In the todo list, the full commit message is preserved, in case it provides
useful cues to the user. A test helper set_cat_todo_editor is introduced to
check this.
Helped-by: Thomas Rast <trast@inf.ethz.ch>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Andrew Pimlott <andrew@pimlott.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git am was previously modified to provide --continue for consistency
with rebase, merge etc, and the documentation changed to showing
--continue as the primary form.
Complete the work by replacing remaining uses of --resolved by
--continue, most notably in suggested command reminders.
Signed-off-by: Kevin Bracey <kevin@bracey.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix for the codepath to parse patches that add new files, generated
by programs other than Git. THis is an old breakage in v1.7.11 and
will need to be merged down to the maintanance tracks.
* tr/maint-apply-non-git-patch-parsefix:
apply: carefully strdup a possibly-NULL name
On Cygwin, recognize "cygstart" as a possible way to start a web
browser (used in "help -w" and "instaweb" among others).
* ys/cygstart:
web--browse: support /usr/bin/cygstart on Cygwin
Many "git submodule" operations do not work on a submodule at a
path whose name is not in ASCII.
* fg/submodule-non-ascii-path:
t7400: test of UTF-8 submodule names pass under Mac OS
handle multibyte characters in name
The fact that the git:// transport does no authentication is easily
overlooked. For example, DNS poisoning may result in fetching from
somewhere that was not intended.
Add a brief security notice to the "GIT URLS" section
of the documentation stating that the git transport should be used
with caution on unsecured networks.
Signed-off-by: Fraser Tweedale <frase@frase.id.au>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mention that the command below is needed for prompt
in ZSH with PS1:
setopt PROMPT_SUBST
Rephrase some parts that mention only the "current branch name"
being displayed in the prompt. Replace it by stating that
the "repository status" is displayed.
Make it clear that colored prompt is only available
in PROMPT_COMMAND/precmd mode.
With-suggestions-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Eduardo R. D'Avila <erdavila@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Do not print a duplicate clean color code when there
is no other indicators other than the current branch
in colored prompt.
Acked-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Eduardo R. D'Avila <erdavila@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After refactoring __git_ps1_colorize_gitstring, codepaths for bash and zsh
became mostly common and tests for bash and zsh became redundant.
Remove tests for zsh. Keep one minimal test that stress the difference
in codepaths for bash and zsh.
Suggested-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Eduardo R. D'Avila <erdavila@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
__git_ps1_colorize_gitstring() sets color codes and
builds the prompt gitstring. It has duplicated code
to handle color codes for bash and zsh shells.
__git_ps1() also has duplicated logic to build the
prompt gitstring.
Remove duplication of logic to build gitstring in
__git_ps1_colorize_gitstring() and __git_ps1().
Leave in __git_ps1_colorize_gitstring() only logic
to set color codes.
Signed-off-by: Eduardo R. D'Avila <erdavila@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-prompt.sh lacks tests for PROMPT_COMMAND mode.
Add tests for:
* pcmode prompt without colors
* pcmode prompt with colors for bash
* pcmode prompt with colors for zsh
Having these tests enables an upcoming refactor in
a safe way.
Signed-off-by: Eduardo R. D'Avila <erdavila@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The configuration option column.ui is very poorly documented, and it is
unclear what the defaults are, and what option can be combined with
what. Rewrite it by splitting up the options into three sections
clearly showing how COL_ENABLED, COL_LAYOUT_MASK, and COL_DENSE work.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch was created by searching for duplicates of email addresses
in the shortlog by
git shortlog -sne |awk '{ print $NF }' |sort |uniq -d
This will yield all email addresses, which are found multiple times within
the shortlog. We can assume that commiters having the same email address
are indeed the same person.
Signed-off-by: Stefan Beller <stefanbeller@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For now, comment out the description on two "git status" UI
configuration, until the reverted topic can be resurrected.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recent "rebase --autostash" update made it impossible to recover
with "git am --abort" from a repository where "git am" without mbox
was run by mistake and then was killed with "^C".
* rr/am-quit-empty-then-abort-fix:
t/am: use test_path_is_missing() where appropriate
am: handle stray $dotest directory
Makefile cleanup.
* jk/doc-build-move-infordir-def:
Documentation/Makefile: move infodir to be with other '*dir's
Documentation/Makefile: fix spaces around assignments
Allow various commit objects to be given to "git rebase" by ':/look
for this string' syntax, e.g. "git rebase --onto ':/there'".
* rr/rebase-sha1-by-string-query:
rebase: use peel_committish() where appropriate
sh-setup: add new peel_committish() helper
t/rebase: add failing tests for a peculiar revision
Give a single message followed by list of paths from "git rm" to
report multiple paths that cannot be removed.
* mm/rm-coalesce-errors:
rm: introduce advice.rmHints to shorten messages
rm: better error message on failure for multiple files
Make it possible to call into copy-notes API from the sequencer code.
* jh/libify-note-handling:
Move create_notes_commit() from notes-merge.c into notes-utils.c
Move copy_note_for_rewrite + friends from builtin/notes.c to notes-utils.c
finish_copy_notes_for_rewrite(): Let caller provide commit message
Plug a small leak in an error codepath.
* fc/sequencer-plug-leak:
sequencer: avoid leaking message buffer when refusing to create an empty commit
sequencer: remove useless indentation
__git_ps1() is usually added to the prompt inside a command
substitution, imposing the overhead of fork()ing a subshell. Using
__git_ps1() for $PROMPT_COMMAND is slightly faster, because it avoids
that command substitution.
Mention this in the comments about setting up the git prompt.
The whole series speeds up the bash prompt on Windows/MSysGit
considerably. Here are some timing results in three scenarios, each
repeated 10 times:
At the top of the work tree, before:
$ time for i in {0..9} ; do prompt="$(__git_ps1)" ; done
real 0m1.716s
user 0m0.301s
sys 0m0.772s
After:
real 0m0.687s
user 0m0.075s
sys 0m0.396s
After, from $PROMPT_COMMAND:
$ time for i in {0..9} ; do __git_ps1 '\h:\w' '$ ' ; done
real 0m0.546s
user 0m0.075s
sys 0m0.181s
At the top of the work tree, detached head, before:
real 0m2.574s
user 0m0.376s
sys 0m1.207s
After:
real 0m1.139s
user 0m0.151s
sys 0m0.500s
After, from $PROMPT_COMMAND:
real 0m1.030s
user 0m0.245s
sys 0m0.336s
In a subdirectory, during rebase, stash status indicator enabled,
before:
real 0m3.557s
user 0m0.495s
sys 0m1.767s
After:
real 0m0.717s
user 0m0.120s
sys 0m0.300s
After, from $PROMPT_COMMAND:
real 0m0.577s
user 0m0.047s
sys 0m0.258s
On Linux the speedup ratio is comparable to Windows, but overall it
was about an order of magnitude faster to begin with. The last case
from above, repeated 100 times, before:
$ time for i in {0..99} ; do prompt="$(__git_ps1)" ; done
real 0m2.806s
user 0m0.180s
sys 0m0.264s
After:
real 0m0.857s
user 0m0.020s
sys 0m0.028s
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Before setting $PS1, __git_ps1() uses a command substitution to
redirect the output from a printf into a variable. Spare the overhead
of fork()ing a subshell by using 'printf -v <var>' to directly assign
the output to that variable.
zsh's printf doesn't support the '-v <var>' option, so stick with the
command substitution when under zsh.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
When enabled, the bash prompt can indicate the presence of untracked
files with a '%' sign. __git_ps1() checks for untracked files by running the
'$(git ls-files --others --exclude-standard)' command substitution,
and displays the indicator when there is no output.
Avoid this command substitution by additionally passing
'--error-unmatch *', and checking the command's return value.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
When the environment variable $GIT_PS1_SHOWSTASHSTATE is set
__git_ps1() checks the presence of stashes by running 'git rev-parse
--verify refs/stash'. This command not only checks that the
'refs/stash' ref exists but also, well, verifies that it's a valid
ref.
However, we don't need to be that thorough for the bash prompt. We
can omit that verification and only check whether 'refs/stash' exists
or not. Since 'git pack-refs' never packs 'refs/stash', it's a matter
of checking the existence of a ref file. Perform this check using
only bash builtins to spare the overhead of fork()+exec()ing a git
process.
Also run 'git pack-refs --all' in the corresponding test to document
that the prompt script depends on 'git pack-refs' not packing
'refs/stash' and to catch possible breakages should this behavior ever
change.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
When the dirty work tree and index status indicator is enabled,
__git_ps1() checks for changes in the index by running 'git diff-index
--cached --quiet HEAD --' and looking at its exit code. However, that
makes sense only when HEAD points to a valid commit: on an unborn
branch the failure of said command would be caused by the invalid
HEAD, not by changes in the index. Therefore, __git_ps1() first
checks for a valid HEAD by running 'git rev-parse --quiet --verify
HEAD'.
Since the previous patch we implicitly check HEAD's validity by
running 'git rev-parse ... --short HEAD', making the dirty status
indicator's 'git rev-parse' check redundant. It's sufficient to check
for non-emptyness of the variable holding the abbreviated commit
object name, thereby sparing the overhead of fork()+exec()ing a git
process.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
When describing a detached HEAD according to the $GIT_PS1_DESCRIBE
environment variable fails, __git_ps1() now runs the '$(git rev-parse
--short HEAD)' command substitution to get the abbreviated detached
HEAD commit object name. This imposes the overhead of fork()ing a
subshell and fork()+exec()ing a git process.
Avoid this overhead by combining this command substitution with the
"main" 'git rev-parse' execution for getting the path to the .git
directory & co. This means that we'll look for the abbreviated commit
object name even when it's not necessary, because we're on a branch or
the detached HEAD can be described. It doesn't matter, however,
because once 'git rev-parse' is up and running to fulfill all those
other queries, the additional overhead of looking for the abbreviated
commit object name is not measurable because it's lost in the noise.
There is a caveat, however, when we are on an unborn branch, because
in that case HEAD doesn't point to a valid commit, hence the query for
the abbreviated commit object name fails. Therefore, '--short HEAD'
must be the last options to 'git rev-parse' in order to get all the
other necessary information for the prompt even on an unborn branch.
Furthermore, in that case, and in that case only, 'git rev-parse'
doesn't output the last line containing the abbreviated commit object
name, obviously, so we have to take care to only parse it if 'git
rev-parse' exited without any error.
Although there are tests already excercising __git_ps1() on unborn
branches, they all do so implicitly. Add a test that checks this
explicitly.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
There are a couple of '$(git rev-parse --<opt>)' command substitutions
in __git_ps1() and three of them are executed in the main code path:
- the first to get the path to the .git directory ('--git-dir'),
- the second to check whether we're inside the .git directory
('--is-inside-git-dir'),
- and the last, depending on the results of the second, either
* to check whether it's a bare repo ('--is-bare-repository'), or
* to check whether inside a work tree ('--is-inside-work-tree').
Naturally, this imposes the overhead of fork()ing three subshells and
fork()+exec()ing three git commands.
Combine these four 'git rev-parse' queries into a single one and use
bash parameter expansions to parse the combined output, i.e. to
separate the path to the .git directory from the true/false of
'--is-inside-git-dir', etc. This way we can eliminate two of the
three subshells and git commands.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
__git_ps1() runs the '$(git symbolic-ref HEAD)' command substitution
to find out whether we are on a branch and to find out the name of
that branch. This imposes the overhead of fork()ing a subshell and
fork()+exec()ing a git process.
Since HEAD is in most cases a single-line file and the symbolic ref
format is quite simple to recognize and parse, read and parse it using
only bash builtins, thereby sparing all that fork()+exec() overhead.
Don't display the git prompt if reading HEAD fails, because a readable
HEAD is required for a git repository. HEAD can also be a symlink
symbolic ref (due to 'core.preferSymlinkRefs'), so use bash builtins
for reading HEAD only when HEAD is not a symlink.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
During an ongoing interactive rebase __git_ps1() finds out the name of
the rebased branch, the total number of patches and the number of the
current patch by executing a '$(cat .git/rebase-merge/<FILE>)' command
substitution for each. That is not quite the most efficient way to
read single line single word files, because it imposes the overhead of
fork()ing a subshell and fork()+exec()ing 'cat' several times.
Use the 'read' bash builtin instead to avoid those overheads.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
