Some of the short help texts that are shown e.g. when running 'git'
without any parameters wrap on a 80-column terminal. They are just
one character over the line. This patch avoids it by decreasing the
number of spaces around the preceding command name from four to
three (on both sides for symmetry).
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We don't append a space after '--bool', so we can't expect
a regular expression to match the space.
Semi-noticed by Junio C Hamano :)
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If the alias expansion is prefixed with an exclamation point, treat
it as a shell command which is run using system(3).
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Among the low-level output functions called from flush_one_pair(),
this was the only function that did not take (filepair, options)
as arguments.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This file is incomplete, unmaintained, and it doesn't belong in the GIT
package anyway.
A more complete version is already included in the Linux -mm tree and
is about to make its way into mainline RSN.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds the support for automatically updating the buffer while editing.
A configuration variable git-blame-autoupdate controls whether this should
be enabled or not.
Signed-off-by: David Kågedal <davidk@lysator.liu.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Make git-blame use the current buffer contents for the blame, instead of
the saved file. This makes the blame correct even if there are unsaved
changes.
Also added a git-reblame command.
Signed-off-by: David Kågedal <davidk@lysator.liu.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Change installation instructions to using either "(require 'git-blame)"
or appropriate autoload instruction in GNU Emacs init file, .emacs
This required adding "(provide 'git-blame)" at the end of git-blame.el
and adding [preliminary] docstring to `git-blame-mode' function for
consistency (to mark function as interactive in `autoload' we have to
provide docstring as DOCSTRING is third arg, and INTERACTIVE fourth,
and both are optional). `git-blame-mode' is marked to autoload.
While at it ensure that we add `git-blame-mode' to `minor-mode-alist'
only once (in a way that does not depend on `cl' package).
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add Emacs Lisp file headers, according to "Coding Conventions" chapter
in Emacs Lisp Reference Manual and Elisp Area Convetions for
EmacsWiki:
http://www.emacswiki.org/cgi-bin/wiki/ElispAreaConventions
Those include: copyright notice, GNU GPL boilerplate, description and
instalation instructions as provided in email and in commit message
introducing git-blame.el, compatibility notes from another email by
David Kågedal about what to change to use it in GNU Emacs 20, and
"git-blame ends here" to detect if file was truncated. First line
includes setting file encoding via first line local variable values
(file variables).
Added comment to "(require 'cl)" to note why it is needed; "Coding
Conventions" advises to avoid require the `cl' package of Common Lisp
extensions at run time.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The way 'git pull' without explicit parameters work were not
explained well in any existing documentation.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When refs/remotes/gfi/master and refs/remotes/gfi/HEAD exist,
and the latter is a symref that points at the former, dwim_ref()
resolves string "gfi" to "refs/remotes/gfi/master" as expected,
but dwim_log() does not understand "gfi@{1.day}" and needs to be
told "gfi/master@{1.day}". This is confusing.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Rather than trying to mark the background color of the line numbers
to show which lines have annotated data loaded, we now show a ruler
between the line numbers and the file data. This ruler is just 1
character wide and its background color is set to grey to denote
which lines have annotation ready. I had to make this change as I
kept loosing the annotation marker when a line was no longer colored
as part of the current selection.
We now color the lines blamed on the current commit in yellow, the
lines in the commit which came after (descendant) in red (hotter,
less tested) and the lines in the commit before (ancestor) in blue
(cooler, better tested).
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
To help clue users into the fact that annotation data arrives
incrementally, and that they should try to locate the region
they want while the tool is running, we jump to the first line
of the first annotation if the user has not already clicked on
a line they are interested in and if the window is still looking
at the very top of the file.
Since it takes a second (at least on my PowerBook) to even generate
the first annotation for git-gui.sh, the user should have plenty of
time to adjust the scrollbar or click on a line even before we get
that first annotation record in, which allows the user to bypass
our automatic jumping.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Using 180 columns worth of screen space to display just 20 columns of
file data and 160 columns worth of annotation information is not
practically useful. Users need/want to see the file data, and have
the anotation associated with it displayed in a detail pane only when
they have focused on a particular region of the file.
Now our file viewer has a small 10-line high pane below the file
which shows the commit message for the commit this line was blamed
on. The columns have all been removed, except the current line
number column as that has some real value when trying to locate an
interesting block.
To keep the user entertained we have a progress meter in the status
bar of the viewer which lets them know how many lines have been
annotated, and how much has been completed. We use a grey background
on the line numbers for lines which we have obtained annotation from,
and we color all lines in the current commit with a yellow background,
so they stand out when scanning through the file. All other lines
are kept with a white background, making the yellow really pop.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Since "git log origin/master" uses dwim_log() to match
"refs/remotes/origin/master", it makes sense to do that for
"git log --reflog", too.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Now, when format-patch outputs more than 9 patches, the numbers
are padded accordingly. Example:
[PATCH 009/167] The 9th patch of a series of 167
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Now that core Git has "renamed" git-repo-config to git-config,
we should do the same. I don't know how long core Git will
keep the repo-config command, and since git-gui's userbase
is so small and almost entirely on some flavor of 1.5.0-rc2
or later, where the rename has already taken place, it should
be OK to rename now.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
One user that I spoke with recently was confused why the 'Add All'
button did not add all of his 'Changed But Not Updated' files.
The particular files in question were new, and thus not known to
Git. Since the 'Add All' routine only updates files which are
already tracked, they were not added automatically.
I suspect that calling this action 'Add Existing' would be less
confusing, so I'm renaming it.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If we are invoked as `git-foo`, then we should run the `foo` subcommand,
as the user has made some sort of link from `git-foo` to our actual
program code. So we should honor their request.
If we are invoked as `git-gui foo`, the user has not made a link (or
did, but is not using it right now) so we should execute the `foo`
subcommand.
We now can start the single commit UI mode via `git-citool` and also
through `git gui citool`.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If you say "git log -g --relative-date", it is very likely that
you want to see the reflog names in terms of a relative date.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Viewing annotated files is one of those tasks that is relatively
difficult to do in a simple vt100 terminal emulator. The user
really wants to be able to browse through a lot of information,
and to interact with it by navigating through revisions.
Now users can start our file viewer with annotations by running
'git gui blame commit path', thereby seeing the contents of the
given file at the given commit. Right now I am being lazy by
not allowing the user to omit the commit name (and have us thus
assume HEAD).
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Some reflogs are/were generated without a message; do not plainly
ignore those entries.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* 'master' of git://repo.or.cz/git/fastimport:
tar archive frontend for fast-import.
Correct spelling of fast-import in docs.
Correct some language in fast-import documentation.
Correct ^0 asciidoc syntax in fast-import docs.
It makes "git reflog [show]" act as
git log -g --pretty=oneline --abbrev-cmit
and is fairly straightforward. So you can just write
git reflog
or
git reflog show
and it will show you the reflog in a nice format.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add -C[NUM] to git-am and git-rebase so that patches can be applied even
if context has changed a bit.
Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If the commit area does not exist, don't save the commit message to
a file, or the window geometry. The reason I'm doing this is I want
to make the main window entirely optional, such as if the user has
asked us to show a blame from the command line. In such cases the
commit area won't exist and trying to get its text would cause an
error.
If we are running without the commit message area, we cannot save
our window geometry either, as the root window '.' won't be a normal
commit window.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This is a minor code cleanup to make working with what used to be the
$single_commit flag easier. Its also to better handle various UI
configurations, depending on command line parameters given by the
user, or perhaps user preferences.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
We already replace \n with \\n so that Tk widgets don't start a new
display line with part of a file path which is just unlucky enough
to contain an LF. But then its confusing to read a path whose name
actually contains \n as literal characters. Escaping \ to \\ would
make that case display as \\n, clarifying the output.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Users want to navigate the file list shown in our branch browser
windows using the keyboard. So we now support basic traversal
with the arrow keys:
Up/Down: Move the "selection bar" to focus on a different name.
Return: Move into the subtree, or open the annotated file.
M1-Right: Ditto.
M1-Up: Move to the parent tree.
M1-Left: Ditto.
Probably the only feature missing from this is to key a leading part
of the file name and jump directly to that file (or subtree).
This change did require a bit of refactoring, to pull the navigation
logic out of the mouse click procedure and into more generic routines
which can also be used in bindings.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If the user has created (or deleted) a branch through an external tool,
and uses Rescan, they probably are trying to make git-gui update to show
their newly created branch.
So now we load all known heads and update the branch menu during any
rescan operation, just in-case the set of known branches was modified.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This is an example fast-import frontend, in less than 100 lines
of Perl. It accepts one or more tar archives on the command line,
passes them through gzcat/bzcat/zcat if necessary, parses out the
individual file headers and feeds all contained data to fast-import.
No temporary files are involved.
Each tar is treated as one commit, with the commit timestamp coming
from the oldest file modification date found within the tar.
Each tar is also tagged with an annotated tag, using the basename
of the tar file as the name of the tag.
Currently symbolic links and hard links are not handled by the
importer. The file checksums are also not verified.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Its spelled 'fast-import', not 'gfi'. Linus and Dscho have both
recently pointed this out to me on the mailing list.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Default values for command line options can be saved in .git/config (or the
global ~/.gitconfig). Config option names match the command line option names,
so cvsimport.d corresponds to git-cvsimport -d. One may also set
cvsimport.module to specify a default cvs module name.
Signed-off-by: James Bowes <jbowes@dangerouslyinc.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Minor documentation improvements, as suggested on the Git mailing
list by Horst H. von Brand and Karl Hasselström.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
I wrote this documentation with asciidoc 7.1.2, but apparently
asciidoc 8 assumes ^ means superscript. The solution was already
documented in rev-parse's manpage and is to use {caret} instead.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
For commit messages, we should really put the "line_termination" when we
output the character in between different commits, *not* between the
commit and the diff. The diff goes hand-in-hand with the commit, it
shouldn't be separated from it with the termination character.
So this:
- uses the termination character for true inter-commit spacing
- uses a regular newline between the commit log and the diff
We had it the other way around.
For the normal case where the termination character is '\n', this
obviously doesn't change anything at all, since we just switched two
identical characters around. So it's very safe - it doesn't change any
normal usage, but it definitely fixes "git log -z".
By fixing "git log -z", you can now also do insane things like
git log -p -z |
grep -z "some patch expression" |
tr '\0' '\n' |
less -S
and you will see only those commits that have the "some patch expression"
in their commit message _or_ their patches.
(This is slightly different from 'git log -S"some patch expression"',
since the latter requires the expression to literally *change* in the
patch, while the "git log -p -z | grep .." approach will see it if it's
just an unchanged _part_ of the patch context)
Of course, if you actually do something like the above, you're probably
insane, but hey, it works!
Try the above command line for a demonstration (of course, you need to
change the "some patch expression" to be something relevant). The old
behaviour of "git log -p -z" was useless (and got things completely wrong
for log entries without patches).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Earlier, when a path that was removed from the working tree was
chosen for update subcommand, you got an error like this:
error: git-resolve.sh: does not exist and --remove not passed
fatal: Unable to process file git-resolve.sh
Signed-off-by: Junio C Hamano <junkio@cox.net>
