Knowing the original names (hashes) of commits can sometimes enable
post-filtering that would otherwise be difficult or impossible. In
particular, the desire to rewrite commit messages which refer to other
prior commits (on top of whatever other filtering is being done) is
very difficult without knowing the original names of each commit.
In addition, knowing the original names (hashes) of blobs can allow
filtering by blob-id without requiring re-hashing the content of the
blob, and is thus useful as a small optimization.
Once we add original ids for both commits and blobs, we may as well
add them for tags too for completeness. Perhaps someone will have a
use for them.
This commit teaches a new --show-original-ids option to fast-export
which will make it add a 'original-oid <hash>' line to blob, commits,
and tags. It also teaches fast-import to parse (and ignore) such
lines.
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git filter-branch has a nifty feature allowing you to rewrite, e.g. just
the last 8 commits of a linear history
git filter-branch $OPTIONS HEAD~8..HEAD
If you try the same with git fast-export, you instead get a history of
only 8 commits, with HEAD~7 being rewritten into a root commit. There
are two alternatives:
1) Don't use the negative revision specification, and when you're
filtering the output to make modifications to the last 8 commits,
just be careful to not modify any earlier commits somehow.
2) First run 'git fast-export --export-marks=somefile HEAD~8', then
run 'git fast-export --import-marks=somefile HEAD~8..HEAD'.
Both are more error prone than I'd like (the first for obvious reasons;
with the second option I have sometimes accidentally included too many
revisions in the first command and then found that the corresponding
extra revisions were not exported by the second command and thus were
not modified as I expected). Also, both are poor from a performance
perspective.
Add a new --reference-excluded-parents option which will cause
fast-export to refer to commits outside the specified rev-list-args
range by their sha1sum. Such a stream will only be useful in a
repository which already contains the necessary commits (much like the
restriction imposed when using --no-data).
Note from Peff:
I think we might be able to do a little more optimization here. If
we're exporting HEAD^..HEAD and there's an object in HEAD^ which is
unchanged in HEAD, I think we'd still print it (because it would not
be marked SHOWN), but we could omit it (by walking the tree of the
boundary commits and marking them shown). I don't think it's a
blocker for what you're doing here, but just a possible future
optimization.
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If file paths are specified to fast-export and a ref points to a commit
that does not touch any of the relevant paths, then that ref would
sometimes fail to be exported. (This depends on whether any ancestors
of the commit which do touch the relevant paths would be exported with
that same ref name or a different ref name.) To avoid this problem,
put *all* specified refs into extra_refs to start, and then as we export
each commit, remove the refname used in the 'commit $REFNAME' directive
from extra_refs. Then, in handle_tags_and_duplicates() we know which
refs actually do need a manual reset directive in order to be included.
This means that we do need some special handling for excluded refs; e.g.
if someone runs
git fast-export ^master master
then they've asked for master to be exported, but they have also asked
for the commit which master points to and all of its history to be
excluded. That logically means ref deletion. Previously, such refs
were just silently omitted from being exported despite having been
explicitly requested for export.
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If file paths are specified to fast-export and multiple refs point to a
commit that does not touch any of the relevant file paths, then
fast-export can hit problems. fast-export has a list of additional refs
that it needs to explicitly set after exporting all blobs and commits,
and when it tries to get_object_mark() on the relevant commit, it can
get a mark of 0, i.e. "not found", because the commit in question did
not touch the relevant paths and thus was not exported. Trying to
import a stream with a mark corresponding to an unexported object will
cause fast-import to crash.
Avoid this problem by taking the commit the ref points to and finding an
ancestor of it that was exported, and make the ref point to that commit
instead.
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If --tag-of-filtered-object=rewrite is specified along with a set of
paths to limit what is exported, then any tags pointing to old commits
that do not contain any of those specified paths cause problems. Since
the old tagged commit is not exported, fast-export attempts to rewrite
such tags to an ancestor commit which was exported. If no such commit
exists, then fast-export currently die()s. Five years after the tag
rewriting logic was added to fast-export (see commit 2d8ad46919,
"fast-export: Add a --tag-of-filtered-object option for newly dangling
tags", 2009-06-25), fast-import gained the ability to delete refs (see
commit 4ee1b225b9, "fast-import: add support to delete refs",
2014-04-20), so now we do have a valid option to rewrite the tag to.
Delete these tags instead of dying.
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pathspec matching against a tree object were buggy when negative
pathspec elements were involved, which has been fixed.
* nd/tree-walk-path-exclusion:
tree-walk.c: fix overoptimistic inclusion in :(exclude) matching
Assorted fixes for bugs found while auditing -Wunused-parameter
warnings.
* jk/misc-unused-fixes:
approxidate: fix NULL dereference in date_time()
pathspec: handle non-terminated strings with :(attr)
approxidate: handle pending number for "specials"
rev-list: handle flags for --indexed-objects
The code to traverse objects for reachability, used to decide what
objects are unreferenced and expendable, have been taught to also
consider per-worktree refs of other worktrees as starting points to
prevent data loss.
* nd/per-worktree-ref-iteration:
git-worktree.txt: correct linkgit command name
reflog expire: cover reflog from all worktrees
fsck: check HEAD and reflog from other worktrees
fsck: move fsck_head_link() to get_default_heads() to avoid some globals
revision.c: better error reporting on ref from different worktrees
revision.c: correct a parameter name
refs: new ref types to make per-worktree refs visible to all worktrees
Add a place for (not) sharing stuff between worktrees
refs.c: indent with tabs, not spaces
"git send-email --transfer-encoding=..." in recent versions of Git
sometimes produced an empty "Content-Transfer-Encoding:" header,
which has been corrected.
* al/send-email-auto-cte-fixup:
send-email: avoid empty transfer encoding header
The history traversal used to implement the tag-following has been
optimized by introducing a new helper.
* ds/add-missing-tags:
remote: make add_missing_tags() linear
test-reach: test get_reachable_subset
commit-reach: implement get_reachable_subset
In preparation to the day when we can deprecate and remove the
"rebase -p", make sure we can skip and later remove tests for
it.
* js/rebase-p-tests:
tests: optionally skip `git rebase -p` tests
t3418: decouple test cases from a previous `rebase -p` test case
t3404: decouple some test cases from outcomes of previous test cases
"git rev-parse --exclude=* --branches --branches" (i.e. first
saying "add only things that do not match '*' out of all branches"
and then adding all branches, without any exclusion this time")
worked as expected, but "--exclude=* --all --all" did not work the
same way, which has been fixed.
* ag/rev-parse-all-exclude-fix:
rev-parse: clear --exclude list after 'git rev-parse --all'
"git fetch" was a bit loose in parsing resposes from the other side
when talking over the protocol v2.
* jt/tighten-fetch-proto-v2-response:
fetch-pack: be more precise in parsing v2 response
The submodule support has been updated to read from the blob at
HEAD:.gitmodules when the .gitmodules file is missing from the
working tree.
* ao/submodule-wo-gitmodules-checked-out:
t/helper: add test-submodule-nested-repo-config
submodule: support reading .gitmodules when it's not in the working tree
submodule: add a helper to check if it is safe to write to .gitmodules
t7506: clean up .gitmodules properly before setting up new scenario
submodule: use the 'submodule--helper config' command
submodule--helper: add a new 'config' subcommand
t7411: be nicer to future tests and really clean things up
t7411: merge tests 5 and 6
submodule: factor out a config_set_in_gitmodules_file_gently function
submodule: add a print_config_from_gitmodules() helper
A couple of tests used to leave the repository in a state that is
deliberately corrupt, which have been corrected.
* ab/pack-tests-cleanup:
index-pack tests: don't leave test repo dirty at end
pack-objects tests: don't leave test .git corrupt at end
pack-objects test: modernize style
Tests for the recently introduced multi-pack index machinery.
* ds/test-multi-pack-index:
packfile: close multi-pack-index in close_all_packs
multi-pack-index: define GIT_TEST_MULTI_PACK_INDEX
midx: close multi-pack-index on repack
midx: fix broken free() in close_midx()
A pattern with '**' that does not have a slash on either side used
to be an invalid one, but the code now treats such double-asterisks
the same way as two normal asterisks that happen to be adjacent to
each other.
* nd/wildmatch-double-asterisk:
wildmatch: change behavior of "foo**bar" in WM_PATHNAME mode
A fourth class of configuration files (in addition to the
traditional "system wide", "per user in the $HOME directory" and
"per repository in the $GIT_DIR/config") has been introduced so
that different worktrees that share the same repository (hence the
same $GIT_DIR/config file) can use different customization.
* nd/per-worktree-config:
worktree: add per-worktree config files
t1300: extract and use test_cmp_config()
"git ls-remote $there foo" was broken by recent update for the
protocol v2 and stopped showing refs that match 'foo' that are not
refs/{heads,tags}/foo, which has been fixed.
* jk/proto-v2-ref-prefix-fix:
ls-remote: pass heads/tags prefixes to transport
ls-remote: do not send ref prefixes for patterns
A regression in Git 2.12 era made "git fsck" fall into an infinite
loop while processing truncated loose objects.
* jk/detect-truncated-zlib-input:
cat-file: handle streaming failures consistently
check_stream_sha1(): handle input underflow
t1450: check large blob in trailing-garbage test
When we see a time like "noon", we pass "12" to our date_time() helper,
which sets the hour to 12pm. If the current time is before noon, then we
wrap around to yesterday using date_yesterday(). But unlike the normal
calls to date_yesterday() from approxidate_alpha(), we pass a NULL "num"
parameter. Since c27cc94fad (approxidate: handle pending number for
"specials", 2018-11-02), that causes a segfault.
One way to fix this is by checking for NULL. But arguably date_time() is
abusing our helper by passing NULL in the first place (and this is the
only case where one of these "special" parsers is used this way). So
instead, let's have it just do the 1-day subtraction itself. It's still
just a one-liner due to our update_tm() helper.
Note that the test added here is a little funny, as we say "10am noon",
which makes the "10am" seem pointless. But this bug can only be
triggered when it the currently-parsed hour is before the special time.
The latest special time is "tea" at 1700, but t0006 uses a hard-coded
TEST_DATE_NOW of 1900. We could reset TEST_DATE_NOW, but that may lead
to confusion in other tests. Just saying "10am noon" makes this test
self-contained.
Reported-by: Carlo Arenas <carenas@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our test scripts can now take the '-V' option as a synonym for the
'--verbose-log' option.
* sg/test-verbose-log:
test-lib: introduce the '-V' short option for '--verbose-log'
Operations on promisor objects make sense in the context of only a
small subset of the commands that internally use the revisions
machinery, but the "--exclude-promisor-objects" option were taken
and led to nonsense results by commands like "log", to which it
didn't make much sense. This has been corrected.
* md/exclude-promisor-objects-fix:
exclude-promisor-objects: declare when option is allowed
Documentation/git-log.txt: do not show --exclude-promisor-objects
"git fetch" over protocol v2 into a shallow repository failed to
fetch full history behind a new tip of history that was diverged
before the cut-off point of the history that was previously fetched
shallowly.
* jt/upload-pack-v2-fix-shallow:
upload-pack: clear flags before each v2 request
upload-pack: make want_obj not global
upload-pack: make have_obj not global
Some codepaths failed to form a proper URL when .gitmodules record
the URL to a submodule repository as relative to the repository of
superproject, which has been corrected.
* sb/submodule-url-to-absolute:
submodule helper: convert relative URL to absolute URL if needed
"git repack" in a shallow clone did not correctly update the
shallow points in the repository, leading to a repository that
does not pass fsck.
* js/shallow-and-fetch-prune:
repack -ad: prune the list of shallow commits
shallow: offer to prune only non-existing entries
repack: point out a bug handling stale shallow info
The logic to determine the archive type "git archive" uses did not
correctly kick in for "git archive --remote", which has been
corrected.
* js/remote-archive-dwimfix:
archive: initialize archivers earlier
tree_entry_interesting() is used for matching pathspec on a tree. The
interesting thing about this function is that, because the tree
entries are known to be sorted, this function can return more than
just "yes, matched" and "no, not matched". It can also say "yes, this
entry is matched and so is the remaining entries in the tree".
This is where I made a mistake when matching exclude pathspec. For
exclude pathspec, we do matching twice, one with positive patterns and
one with negative ones, then a rule table is applied to determine the
final "include or exclude" result. Note that "matched" does not
necessarily mean include. For negative patterns, "matched" means
exclude.
This particular rule is too eager to include everything. Rule 8 says
that "if all entries are positively matched" and the current entry is
not negatively matched (i.e. not excluded), then all entries are
positively matched and therefore included. But this is not true. If
the _current_ entry is not negatively matched, it does not mean the
next one will not be and we cannot conclude right away that all
remaining entries are positively matched and can be included.
Rules 8 and 18 are now updated to be less eager. We conclude that the
current entry is positively matched and included. But we say nothing
about remaining entries. tree_entry_interesting() will be called again
for those entries where we will determine entries individually.
Reported-by: Christophe Bliard <christophe.bliard@trux.info>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
New "--pretty=format:" placeholders %GF and %GP that show the GPG
key fingerprints have been invented.
* mg/gpg-fingerprint:
gpg-interface.c: obtain primary key fingerprint as well
gpg-interface.c: support getting key fingerprint via %GF format
gpg-interface.c: use flags to determine key/signer info presence
Detect and reject a signature block that has more than one GPG
signature.
* mg/gpg-parse-tighten:
gpg-interface.c: detect and reject multiple signatures on commits
Further clean-up of merge-recursive machinery.
* en/merge-cleanup-more:
merge-recursive: avoid showing conflicts with merge branch before HEAD
merge-recursive: improve auto-merging messages with path collisions
The get_reachable_subset() method returns the list of commits in
the 'to' array that are reachable from at least one commit in the
'from' array. Add tests that check this method works in a few
cases:
1. All commits in the 'to' list are reachable. This exercises the
early-termination condition.
2. Some commits in the 'to' list are reachable. This exercises the
loop-termination condition.
3. No commits in the 'to' list are reachable. This exercises the
NULL return condition.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a small bug introduced by "7a36987ff (send-email: add an auto option
for transfer encoding, 2018-07-14)".
I saw the following message when setting --transfer-encoding for a file
with the same encoding:
$ git send-email --transfer-encoding=8bit example.patch
Use of uninitialized value $xfer_encoding in concatenation (.) or string
at /usr/lib/git-core/git-send-email line 1744.
The new tests are by brian m. carlson.
Signed-off-by: Aaron Lindsay <aaron@aclindsay.com>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The approxidate parser has a table of special keywords like
"yesterday", "noon", "pm", etc. Some of these, like "pm", do
the right thing if we've recently seen a number: "3pm" is
what you'd think.
However, most of them do not look at or modify the
pending-number flag at all, which means a number may "jump"
across a significant keyword and be used unexpectedly. For
example, when parsing:
January 5th noon pm
we'd connect the "5" to "pm", and ignore it as a
day-of-month. This is obviously a bit silly, as "noon"
already implies "pm". And other mis-parsed things are
generally as silly ("January 5th noon, years ago" would
connect the 5 to "years", but probably nobody would type
that).
However, the fix is simple: when we see a keyword like
"noon", we should flush the pending number (as we would if
we hit another number, or the end of the string). In a few
of the specials that actually modify the day, we can simply
throw away the number (saying "Jan 5 yesterday" should not
respect the number at all).
Note that we have to either move or forward-declare the
static pending_number() to make it accessible to these
functions; this patch moves it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a traversal sees the --indexed-objects option, it adds
all blobs and valid cache-trees from the index to the
traversal using add_index_objects_to_pending(). But that
function totally ignores its flags parameter!
That means that doing:
git rev-list --objects --indexed-objects
and
git rev-list --objects --not --indexed-objects
produce the same output, because we ignore the UNINTERESTING
flag when walking the index in the second example.
Nobody noticed because this feature was added as a way for
tools like repack to increase their coverage of reachable
objects, meaning it would only be used like the first
example above.
But since it's user facing (and because the documentation
describes it "as if the objects are listed on the command
line"), we should make sure the negative case behaves
sensibly.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `--preserve-merges` mode of the `rebase` command is slated to be
deprecated soon, as the more powerful `--rebase-merges` mode is
available now, and the latter was designed with the express intent to
address the shortcomings of `--preserve-merges`' design (e.g. the
inability to reorder commits in an interactive rebase).
As such, we will eventually even remove the `--preserve-merges` support,
and along with it, its tests.
In preparation for this, and also to allow the Windows phase of our
automated tests to save some well-needed time when running the test
suite, this commit introduces a new prerequisite REBASE_P, which can be
forced to being unmet by setting the environment variable
`GIT_TEST_SKIP_REBASE_P` to any non-empty string.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is in general a good idea for regression test cases to be as
independent of each other as possible (with the one exception of an
initial `setup` test case, which is only a test case in Git's test suite
because it does not have a notion of a fixture or setup).
This patch addresses one particular instance of this principle being
violated: a few test cases in t3418-rebase-continue.sh depend on a side
effect of a test case that verifies a specific `rebase -p` behavior. The
later test cases should, however, still succeed even if the `rebase -p`
test case is skipped.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Originally, the `--preserve-merges` option of the `git rebase` command
piggy-backed on top of the `--interactive` feature. For that reason, the
early test cases were added to the very same test script that contains
the `git rebase -i` tests: `t3404-rebase-interactive.sh`.
However, since c42abfe785 (rebase: introduce a dedicated backend for
--preserve-merges, 2018-05-28), the `--preserve-merges` feature got its
own backend, in preparation for converting the rest of the
`--interactive` code to built-in code, written in C rather than shell.
The reason why the `--preserve-merges` feature was not converted at the
same time is that we have something much better now: `--rebase-merges`.
That option intends to supersede `--preserve-merges`, and we will
probably deprecate the latter soon.
Once `--preserve-merges` has been deprecated for a good amount of time,
it will be time to remove it, and along with it, its tests.
In preparation for that, let's make the rest of the test cases in
`t3404-rebase-interactive.sh` independent of the test cases dedicated to
`--preserve-merges`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rebase -i" learned to take 'b' as the short form of 'break'
option in the todo list.
* js/rebase-i-shortopt:
rebase -i: recognize short commands without arguments
"git rebase -i" learned a new insn, 'break', that the user can
insert in the to-do list. Upon hitting it, the command returns
control back to the user.
* js/rebase-i-break:
rebase -i: introduce the 'break' command
rebase -i: clarify what happens on a failed `exec`
"git rebase" that has recently been rewritten in C had a few issues
in its "--autstash" feature, which have been corrected.
* js/rebase-autostash-fix:
rebase --autostash: fix issue with dirty submodules
rebase --autostash: demonstrate a problem with dirty submodules
rebase (autostash): use an explicit OID to apply the stash
rebase (autostash): store the full OID in <state-dir>/autostash
rebase (autostash): avoid duplicate call to state_dir_path()
Rewrite of the remaining "rebase -i" machinery in C.
* ag/rebase-i-in-c:
rebase -i: move rebase--helper modes to rebase--interactive
rebase -i: remove git-rebase--interactive.sh
rebase--interactive2: rewrite the submodes of interactive rebase in C
rebase -i: implement the main part of interactive rebase as a builtin
rebase -i: rewrite init_basic_state() in C
rebase -i: rewrite write_basic_state() in C
rebase -i: rewrite the rest of init_revisions_and_shortrevisions() in C
rebase -i: implement the logic to initialize $revisions in C
rebase -i: remove unused modes and functions
rebase -i: rewrite complete_action() in C
t3404: todo list with commented-out commands only aborts
sequencer: change the way skip_unnecessary_picks() returns its result
sequencer: refactor append_todo_help() to write its message to a buffer
rebase -i: rewrite checkout_onto() in C
rebase -i: rewrite setup_reflog_action() in C
sequencer: add a new function to silence a command, except if it fails
rebase -i: rewrite the edit-todo functionality in C
editor: add a function to launch the sequence editor
rebase -i: rewrite append_todo_help() in C
sequencer: make three functions and an enum from sequencer.c public
Commit [1] added the --exclude option to revision.c. The --all,
--branches, --tags, --remotes, and --glob options clear the exclude
list. Shortly therafter, commit [2] added the same to 'git rev-parse',
but without clearing the exclude list for the --all option.
[1] e7b432c52 ("revision: introduce --exclude=<glob> to tame wildcards", 2013-08-30)
[2] 9dc01bf06 ("rev-parse: introduce --exclude=<glob> to tame wildcards", 2013-11-01)
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Each section in a protocol v2 response is followed by either a DELIM
packet (indicating more sections to follow) or a FLUSH packet
(indicating none to follow). But when parsing the "acknowledgments"
section, do_fetch_pack_v2() is liberal in accepting both, but determines
whether to continue reading or not based solely on the contents of the
"acknowledgments" section, not on whether DELIM or FLUSH was read.
There is no issue with a protocol-compliant server, but can result in
confusing error messages when communicating with a server that
serves unexpected additional sections. Consider a server that sends
"new-section" after "acknowledgments":
- client writes request
- client reads the "acknowledgments" section which contains no "ready",
then DELIM
- since there was no "ready", client needs to continue negotiation, and
writes request
- client reads "new-section", and reports to the end user "expected
'acknowledgments', received 'new-section'"
For the person debugging the involved Git implementation(s), the error
message is confusing in that "new-section" was not received in response
to the latest request, but to the first one.
One solution is to always continue reading after DELIM, but in this
case, we can do better. We know from the protocol that "ready" means at
least the packfile section is coming (hence, DELIM) and that no "ready"
means that no sections are to follow (hence, FLUSH). So teach
process_acks() to enforce this.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a test tool to exercise config_from_gitmodules(), in particular for
the case of nested submodules.
Add also a test to document that reading the submoudles config of nested
submodules does not work yet when the .gitmodules file is not in the
working tree but it still in the index.
This is because the git API does not always make it possible access the
object store of an arbitrary repository (see get_oid() usage in
config_from_gitmodules()).
When this git limitation gets fixed the aforementioned use case will be
supported too.
Signed-off-by: Antonio Ospite <ao2@ao2.it>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the .gitmodules file is not available in the working tree, try
using the content from the index and from the current branch. This
covers the case when the file is part of the repository but for some
reason it is not checked out, for example because of a sparse checkout.
This makes it possible to use at least the 'git submodule' commands
which *read* the gitmodules configuration file without fully populating
the working tree.
Writing to .gitmodules will still require that the file is checked out,
so check for that before calling config_set_in_gitmodules_file_gently.
Add a similar check also in git-submodule.sh::cmd_add() to anticipate
the eventual failure of the "git submodule add" command when .gitmodules
is not safely writeable; this prevents the command from leaving the
repository in a spurious state (e.g. the submodule repository was cloned
but .gitmodules was not updated because
config_set_in_gitmodules_file_gently failed).
Moreover, since config_from_gitmodules() now accesses the global object
store, it is necessary to protect all code paths which call the function
against concurrent access to the global object store. Currently this
only happens in builtin/grep.c::grep_submodules(), so call
grep_read_lock() before invoking code involving
config_from_gitmodules().
Finally, add t7418-submodule-sparse-gitmodules.sh to verify that reading
from .gitmodules succeeds and that writing to it fails when the file is
not checked out.
NOTE: there is one rare case where this new feature does not work
properly yet: nested submodules without .gitmodules in their working
tree. This has been documented with a warning and a test_expect_failure
item in t7814, and in this case the current behavior is not altered: no
config is read.
Signed-off-by: Antonio Ospite <ao2@ao2.it>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unlike its arbitrary text patterns, the --heads and --tags
options to ls-remote are true prefixes. We can pass this
information to the transport code. If the v2 protocol is in
use, that will reduce the size of the ref advertisement.
Note that the test added here succeeds both before and after
the patch. This is an optimization, not a bug-fix; it's just
making sure we didn't break anything.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
