Commit Graph

738 Commits

Author SHA1 Message Date
Junio C Hamano
7ddd582402 Merge branch 'jc/maint-diffstat-numstat-context'
* jc/maint-diffstat-numstat-context:
  diff: teach --stat/--numstat to honor -U$num
2011-10-10 15:56:18 -07:00
Junio C Hamano
f01cae918f diff: teach --stat/--numstat to honor -U$num
"git diff -p" piped to external diffstat and "git diff --stat" may see
different patch text (both are valid and describe the same change
correctly) when counting the number of added and deleted lines, arriving
at different results to confuse the users, as --stat/--numstat codepath
always uses the hardcoded -U0 as the context length.

Make --stat/--numstat codepath to honor the context length the same way
as the textual patch codepath does to avoid this problem.

Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-09-22 10:54:47 -07:00
Junio C Hamano
f946b465d7 Merge branch 'jk/color-and-pager'
* jk/color-and-pager:
  want_color: automatically fallback to color.ui
  diff: don't load color config in plumbing
  config: refactor get_colorbool function
  color: delay auto-color decision until point of use
  git_config_colorbool: refactor stdout_is_tty handling
  diff: refactor COLOR_DIFF from a flag into an int
  setup_pager: set GIT_PAGER_IN_USE
  t7006: use test_config helpers
  test-lib: add helper functions for config
  t7006: modernize calls to unset

Conflicts:
	builtin/commit.c
	parse-options.c
2011-08-28 21:19:16 -07:00
Jeff King
3e1dd17a89 diff: don't load color config in plumbing
The diff config callback is split into two functions: one
which loads "ui" config, and one which loads "basic" config.
The former chains to the latter, as the diff UI config is a
superset of the plumbing config.

The color.diff variable is only loaded in the UI config.
However, the basic config actually chains to
git_color_default_config, which loads color.ui. This doesn't
actually cause any bugs, because the plumbing diff code does
not actually look at the value of color.ui.

However, it is somewhat nonsensical, and it makes it
difficult to refactor the color code. It probably came about
because there is no git_color_config to load only color
config, but rather just git_color_default_config, which
loads color config and chains to git_default_config.

This patch splits out the color-specific portion of
git_color_default_config so that the diff UI config can call
it directly. This is perhaps better explained by the
chaining of callbacks. Before we had:

  git_diff_ui_config
    -> git_diff_basic_config
      -> git_color_default_config
        -> git_default_config

Now we have:

  git_diff_ui_config
    -> git_color_config
    -> git_diff_basic_config
      -> git_default_config

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-19 15:51:38 -07:00
Jeff King
daa0c3d971 color: delay auto-color decision until point of use
When we read a color value either from a config file or from
the command line, we use git_config_colorbool to convert it
from the tristate always/never/auto into a single yes/no
boolean value.

This has some timing implications with respect to starting
a pager.

If we start (or decide not to start) the pager before
checking the colorbool, everything is fine. Either isatty(1)
will give us the right information, or we will properly
check for pager_in_use().

However, if we decide to start a pager after we have checked
the colorbool, things are not so simple. If stdout is a tty,
then we will have already decided to use color. However, the
user may also have configured color.pager not to use color
with the pager. In this case, we need to actually turn off
color. Unfortunately, the pager code has no idea which color
variables were turned on (and there are many of them
throughout the code, and they may even have been manipulated
after the colorbool selection by something like "--color" on
the command line).

This bug can be seen any time a pager is started after
config and command line options are checked. This has
affected "git diff" since 89d07f7 (diff: don't run pager if
user asked for a diff style exit code, 2007-08-12). It has
also affect the log family since 1fda91b (Fix 'git log'
early pager startup error case, 2010-08-24).

This patch splits the notion of parsing a colorbool and
actually checking the configuration. The "use_color"
variables now have an additional possible value,
GIT_COLOR_AUTO. Users of the variable should use the new
"want_color()" wrapper, which will lazily determine and
cache the auto-color decision.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-19 15:51:34 -07:00
Jeff King
e269eb7946 git_config_colorbool: refactor stdout_is_tty handling
Usually this function figures out for itself whether stdout
is a tty. However, it has an extra parameter just to allow
git-config to override the auto-detection for its
--get-colorbool option.

Instead of an extra parameter, let's just use a global
variable. This makes calling easier in the common case, and
will make refactoring the colorbool code much simpler.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-18 14:48:29 -07:00
Jeff King
f1c9626105 diff: refactor COLOR_DIFF from a flag into an int
This lets us store more than just a bit flag for whether we
want color; we can also store whether we want automatic
colors. This can be useful for making the automatic-color
decision closer to the point of use.

This mostly just involves replacing DIFF_OPT_* calls with
manipulations of the flag. The biggest exception is that
calls to DIFF_OPT_TST must check for "o->use_color > 0",
which lets an "unknown" value (i.e., the default) stay at
"no color". In the previous code, a value of "-1" was not
propagated at all.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-18 14:35:53 -07:00
Junio C Hamano
ca01600306 Merge branch 'rc/histogram-diff'
* rc/histogram-diff:
  xdiff/xhistogram: drop need for additional variable
  xdiff/xhistogram: rely on xdl_trim_ends()
  xdiff/xhistogram: rework handling of recursed results
  xdiff: do away with xdl_mmfile_next()
  Make test number unique
  xdiff/xprepare: use a smaller sample size for histogram diff
  xdiff/xprepare: skip classification
  teach --histogram to diff
  t4033-diff-patience: factor out tests
  xdiff/xpatience: factor out fall-back-diff function
  xdiff/xprepare: refactor abort cleanups
  xdiff/xprepare: use memset()
2011-08-17 17:36:06 -07:00
Junio C Hamano
a35d78c0f4 Merge branch 'jc/zlib-wrap' into maint
* jc/zlib-wrap:
  zlib: allow feeding more than 4GB in one go
  zlib: zlib can only process 4GB at a time
  zlib: wrap deflateBound() too
  zlib: wrap deflate side of the API
  zlib: wrap inflateInit2 used to accept only for gzip format
  zlib: wrap remaining calls to direct inflate/inflateEnd
  zlib wrapper: refactor error message formatter
2011-08-16 11:23:26 -07:00
Junio C Hamano
e10e476fb1 Merge branch 'jk/combine-diff-binary-etc' into maint
* jk/combine-diff-binary-etc:
  combine-diff: respect textconv attributes
  refactor get_textconv to not require diff_filespec
  combine-diff: handle binary files as binary
  combine-diff: calculate mode_differs earlier
  combine-diff: split header printing into its own function
2011-08-16 11:23:24 -07:00
Junio C Hamano
eb4f4076aa Merge branch 'jc/zlib-wrap'
* jc/zlib-wrap:
  zlib: allow feeding more than 4GB in one go
  zlib: zlib can only process 4GB at a time
  zlib: wrap deflateBound() too
  zlib: wrap deflate side of the API
  zlib: wrap inflateInit2 used to accept only for gzip format
  zlib: wrap remaining calls to direct inflate/inflateEnd
  zlib wrapper: refactor error message formatter

Conflicts:
	sha1_file.c
2011-07-19 09:33:04 -07:00
Tay Ray Chuan
8c912eea94 teach --histogram to diff
Port JGit's HistogramDiff algorithm over to C. Rough numbers (TODO) show
that it is faster than its --patience cousin, as well as the default
Meyers algorithm.

The implementation has been reworked to use structs and pointers,
instead of bitmasks, thus doing away with JGit's 2^28 line limit.

We also use xdiff's default hash table implementation (xdl_hash_bits()
with XDL_HASHLONG()) for convenience.

Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-07-12 09:29:20 -07:00
Junio C Hamano
a852aac48d Merge branch 'mg/diff-stat-count'
* mg/diff-stat-count:
  diff --stat-count: finishing touches
  diff-options.txt: describe --stat-{width,name-width,count}
  diff: introduce --stat-lines to limit the stat lines
  diff.c: omit hidden entries from namelen calculation with --stat
2011-06-29 17:03:10 -07:00
Junio C Hamano
dbae1a1336 Merge branch 'jk/combine-diff-binary-etc'
* jk/combine-diff-binary-etc:
  combine-diff: respect textconv attributes
  refactor get_textconv to not require diff_filespec
  combine-diff: handle binary files as binary
  combine-diff: calculate mode_differs earlier
  combine-diff: split header printing into its own function
2011-06-29 17:03:10 -07:00
Junio C Hamano
ef49a7a012 zlib: zlib can only process 4GB at a time
The size of objects we read from the repository and data we try to put
into the repository are represented in "unsigned long", so that on larger
architectures we can handle objects that weigh more than 4GB.

But the interface defined in zlib.h to communicate with inflate/deflate
limits avail_in (how many bytes of input are we calling zlib with) and
avail_out (how many bytes of output from zlib are we ready to accept)
fields effectively to 4GB by defining their type to be uInt.

In many places in our code, we allocate a large buffer (e.g. mmap'ing a
large loose object file) and tell zlib its size by assigning the size to
avail_in field of the stream, but that will truncate the high octets of
the real size. The worst part of this story is that we often pass around
z_stream (the state object used by zlib) to keep track of the number of
used bytes in input/output buffer by inspecting these two fields, which
practically limits our callchain to the same 4GB limit.

Wrap z_stream in another structure git_zstream that can express avail_in
and avail_out in unsigned long. For now, just die() when the caller gives
a size that cannot be given to a single zlib call. In later patches in the
series, we would make git_inflate() and git_deflate() internally loop to
give callers an illusion that our "improved" version of zlib interface can
operate on a buffer larger than 4GB in one go.

Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-06-10 11:52:15 -07:00
Junio C Hamano
225a6f1068 zlib: wrap deflateBound() too
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-06-10 11:18:17 -07:00
Junio C Hamano
55bb5c9147 zlib: wrap deflate side of the API
Wrap deflateInit, deflate, and deflateEnd for everybody, and the sole use
of deflateInit2 in remote-curl.c to tell the library to use gzip header
and trailer in git_deflate_init_gzip().

There is only one caller that cares about the status from deflateEnd().
Introduce git_deflate_end_gently() to let that sole caller retrieve the
status and act on it (i.e. die) for now, but we would probably want to
make inflate_end/deflate_end die when they ran out of memory and get
rid of the _gently() kind.

Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-06-10 11:10:29 -07:00
Junio C Hamano
456a4c08b8 Merge branch 'jk/diff-not-so-quick'
* jk/diff-not-so-quick:
  diff: futureproof "stop feeding the backend early" logic
  diff_tree: disable QUICK optimization with diff filter

Conflicts:
	diff.c
2011-06-06 11:40:14 -07:00
Junio C Hamano
b3c89315a3 Merge branch 'jc/rename-degrade-cc-to-c' into maint
* jc/rename-degrade-cc-to-c:
  diffcore-rename: fall back to -C when -C -C busts the rename limit
  diffcore-rename: record filepair for rename src
  diffcore-rename: refactor "too many candidates" logic
  builtin/diff.c: remove duplicated call to diff_result_code()
2011-05-31 12:00:02 -07:00
Junio C Hamano
28b9264dd6 diff: futureproof "stop feeding the backend early" logic
Refactor the "do not stop feeding the backend early" logic into a small
helper function and use it in both run_diff_files() and diff_tree() that
has the stop-early optimization. We may later add other types of diffcore
transformation that require to look at the whole result like diff-filter
does, and having the logic in a single place is essential for longer term
maintainability.

Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-05-31 09:21:36 -07:00
Junio C Hamano
e5f85df87e diff --stat-count: finishing touches
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-05-27 21:50:39 -07:00
Michael J Gruber
808e1db231 diff: introduce --stat-lines to limit the stat lines
Often one is interested in the full --stat output only for commits which
change a few files, but not others, because larger restructuring gives a
--stat which fills a few screens.

Introduce a new option --stat-count=<count> which limits the --stat output
to the first <count> lines, followed by a "..." line. It can
also be given as the third parameter in
--stat=<width>,<name-width>,<count>.

Also, the unstuck form is supported analogous to the other two stat
parameters.

Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-05-27 10:44:34 -07:00
Michael J Gruber
358e460eeb diff.c: omit hidden entries from namelen calculation with --stat
Currently, --stat calculates the longest name from all items but then
drops some (mode changes) from the output later on.

Instead, drop them from the namelen generation and calculation.

Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-05-27 10:44:02 -07:00
Junio C Hamano
d9ac3e41c3 Merge branch 'jm/maint-diff-words-with-sbe' into maint
* jm/maint-diff-words-with-sbe:
  do not read beyond end of malloc'd buffer
2011-05-26 09:43:00 -07:00
Jeff King
3813e69031 refactor get_textconv to not require diff_filespec
This function actually does two things:

  1. Load the userdiff driver for the filespec.

  2. Decide whether the driver has a textconv component, and
     initialize the textconv cache if applicable.

Only part (1) requires the filespec object, and some callers
may not have a filespec at all. So let's split them it into
two functions, and put part (2) with the userdiff code,
which is a better fit.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-05-23 15:46:02 -07:00
Junio C Hamano
34ad5a52b4 Merge branch 'jm/maint-diff-words-with-sbe'
* jm/maint-diff-words-with-sbe:
  do not read beyond end of malloc'd buffer
2011-05-23 10:27:42 -07:00
Jim Meyering
42536dd9b9 do not read beyond end of malloc'd buffer
With diff.suppress-blank-empty=true, "git diff --word-diff" would
output data that had been read from uninitialized heap memory.
The problem was that fn_out_consume did not account for the
possibility of a line with length 1, i.e., the empty context line
that diff.suppress-blank-empty=true converts from " \n" to "\n".
Since it assumed there would always be a prefix character (the space),
it decremented "len" unconditionally, thus passing len=0 to emit_line,
which would then blindly call emit_line_0 with len=-1 which would
pass that value on to fwrite as SIZE_MAX.  Boom.

Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-05-20 11:39:49 -07:00
Junio C Hamano
df54e2bfd6 Merge branch 'jh/dirstat-lines'
* jh/dirstat-lines:
  Mark dirstat error messages for translation
  Improve error handling when parsing dirstat parameters
  New --dirstat=lines mode, doing dirstat analysis based on diffstat
  Allow specifying --dirstat cut-off percentage as a floating point number
  Add config variable for specifying default --dirstat behavior
  Refactor --dirstat parsing; deprecate --cumulative and --dirstat-by-file
  Make --dirstat=0 output directories that contribute < 0.1% of changes
  Add several testcases for --dirstat and friends
2011-05-13 11:01:32 -07:00
Junio C Hamano
a613b534bc Merge branch 'jc/fix-diff-files-unmerged' into maint
* jc/fix-diff-files-unmerged:
  diff-files: show unmerged entries correctly
  diff: remove often unused parameters from diff_unmerge()
  diff.c: return filepair from diff_unmerge()
  test: use $_z40 from test-lib
2011-05-13 10:41:54 -07:00
Junio C Hamano
22dbeee715 Merge branch 'jc/fix-diff-files-unmerged'
* jc/fix-diff-files-unmerged:
  diff-files: show unmerged entries correctly
  diff: remove often unused parameters from diff_unmerge()
  diff.c: return filepair from diff_unmerge()
  test: use $_z40 from test-lib
2011-05-06 10:52:58 -07:00
Junio C Hamano
f5bf1b5f6b Merge branch 'jh/dirstat' into maint
* jh/dirstat:
  --dirstat: In case of renames, use target filename instead of source filename
  Teach --dirstat not to completely ignore rearranged lines within a file
  --dirstat-by-file: Make it faster and more correct
  --dirstat: Describe non-obvious differences relative to --stat or regular diff
2011-05-04 14:59:07 -07:00
Johan Herland
7478ac57c4 Mark dirstat error messages for translation
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-04-29 11:22:56 -07:00
Johan Herland
51670fc87e Improve error handling when parsing dirstat parameters
When encountering errors or unknown tokens while parsing parameters to the
--dirstat option, it makes sense to die() with an error message informing
the user of which parameter did not make sense. However, when parsing the
diff.dirstat config variable, we cannot simply die(), but should instead
(after warning the user) ignore the erroneous or unrecognized parameter.
After all, future Git versions might add more dirstat parameters, and
using two different Git versions on the same repo should not cripple the
older Git version just because of a parameter that is only understood by
a more recent Git version.

This patch fixes the issue by refactoring the dirstat parameter parsing
so that parse_dirstat_params() keeps on parsing parameters, even if an
earlier parameter was not recognized. When parsing has finished, it returns
zero if all parameters were successfully parsed, and non-zero if one or
more parameters were not recognized (with appropriate error messages
appended to the 'errmsg' argument).

The parse_dirstat_params() callers then decide (based on the return value
from parse_dirstat_params()) whether to warn and ignore (in case of
diff.dirstat), or to warn and die (in case of --dirstat).

The patch also adds a couple of tests verifying the correct behavior of
--dirstat and diff.dirstat in the face of unknown (possibly future) dirstat
parameters.

Suggested-by: Junio C Hamano <gitster@pobox.com>
Improved-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-04-29 11:22:56 -07:00
Johan Herland
1c57a627bf New --dirstat=lines mode, doing dirstat analysis based on diffstat
This patch adds an alternative implementation of show_dirstat(), called
show_dirstat_by_line(), which uses the more expensive diffstat analysis
(as opposed to show_dirstat()'s own (relatively inexpensive) analysis)
to derive the numbers from which the --dirstat output is computed.

The alternative implementation is controlled by the new "lines" parameter
to the --dirstat option (or the diff.dirstat config variable).

For binary files, the diffstat analysis counts bytes instead of lines,
so to prevent binary files from dominating the dirstat results, the
byte counts for binary files are divided by 64 before being compared to
their textual/line-based counterparts. This is a stupid and ugly - but
very cheap - heuristic.

In linux-2.6.git, running the three different --dirstat modes:

  time git diff v2.6.20..v2.6.30 --dirstat=changes > /dev/null
vs.
  time git diff v2.6.20..v2.6.30 --dirstat=lines > /dev/null
vs.
  time git diff v2.6.20..v2.6.30 --dirstat=files > /dev/null

yields the following average runtimes on my machine:

 - "changes" (default): ~6.0 s
 - "lines":             ~9.6 s
 - "files":             ~0.1 s

So, as expected, there's a considerable performance hit (~60%) by going
through the full diffstat analysis as compared to the default "changes"
analysis (obviously, "files" is much faster than both). As such, the
"lines" mode is probably only useful if you really need the --dirstat
numbers to be consistent with the numbers returned from the other
--*stat options.

The patch also includes documentation and tests for the new dirstat mode.

Improved-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-04-29 11:22:55 -07:00
Johan Herland
712d2c7dd8 Allow specifying --dirstat cut-off percentage as a floating point number
Only the first digit after the decimal point is kept, as the dirstat
calculations all happen in permille.

Selftests verifying floating-point percentage input has been added.

Improved-by: Junio C Hamano <gitster@pobox.com>
Improved-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-04-29 11:20:11 -07:00
Johan Herland
2d17495196 Add config variable for specifying default --dirstat behavior
The new diff.dirstat config variable takes the same arguments as
'--dirstat=<args>', and specifies the default arguments for --dirstat.
The config is obviously overridden by --dirstat arguments passed on the
command line.

When not specified, the --dirstat defaults are 'changes,noncumulative,3'.

The patch also adds several tests verifying the interaction between the
diff.dirstat config variable, and the --dirstat command line option.

Improved-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-04-29 11:20:03 -07:00
Johan Herland
333f3fb0c5 Refactor --dirstat parsing; deprecate --cumulative and --dirstat-by-file
Instead of having multiple interconnected dirstat-related options, teach
the --dirstat option itself to accept all behavior modifiers as parameters.

 - Preserve the current --dirstat=<limit> (where <limit> is an integer
   specifying a cut-off percentage)
 - Add --dirstat=cumulative, replacing --cumulative
 - Add --dirstat=files, replacing --dirstat-by-file
 - Also add --dirstat=changes and --dirstat=noncumulative for specifying the
   current default behavior. These allow the user to reset other --dirstat
   parameters (e.g. 'cumulative' and 'files') occuring earlier on the
   command line.

The deprecated options (--cumulative and --dirstat-by-file) are still
functional, although they have been removed from the documentation.

Allow multiple parameters to be separated by commas, e.g.:
  --dirstat=files,10,cumulative

Update the documentation accordingly, and add testcases verifying the
behavior of the new syntax.

Improved-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-04-29 11:17:36 -07:00
Johan Herland
58a8756a98 Make --dirstat=0 output directories that contribute < 0.1% of changes
The expected output from --dirstat=0, is to include any directory with
changes, even if those changes contribute a minuscule portion of the total
changes. However, currently, directories that contribute less than 0.1% are
not included, since their 'permille' value is 0, and there is an
'if (permille)' check in gather_dirstat() that causes them to be ignored.

This test is obviously intended to exclude directories that contribute no
changes whatsoever, but in this case, it hits too broadly. The correct
check is against 'this_dir' from which the permille is calculated. Only if
this value is 0 does the directory truly contribute no changes, and should
be skipped from the output.

This patches fixes this issue, and updates corresponding testcases to
expect the new behvaior.

Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-04-29 11:17:36 -07:00
Junio C Hamano
50d3062ab2 Merge branch 'jc/diff-irreversible-delete'
* jc/diff-irreversible-delete:
  git diff -D: omit the preimage of deletes
2011-04-28 14:11:47 -07:00
Junio C Hamano
76a89d6d82 Merge branch 'jc/rename-degrade-cc-to-c'
* jc/rename-degrade-cc-to-c:
  diffcore-rename: fall back to -C when -C -C busts the rename limit
  diffcore-rename: record filepair for rename src
  diffcore-rename: refactor "too many candidates" logic
  builtin/diff.c: remove duplicated call to diff_result_code()
2011-04-28 14:11:43 -07:00
Junio C Hamano
d98a509ec3 Merge branch 'jh/dirstat'
* jh/dirstat:
  --dirstat: In case of renames, use target filename instead of source filename
  Teach --dirstat not to completely ignore rearranged lines within a file
  --dirstat-by-file: Make it faster and more correct
  --dirstat: Describe non-obvious differences relative to --stat or regular diff
2011-04-28 14:11:19 -07:00
Junio C Hamano
fa7b290895 diff: remove often unused parameters from diff_unmerge()
e9c8409 (diff-index --cached --raw: show tree entry on the LHS for
unmerged entries., 2007-01-05) added a <mode, object name> pair as
parameters to this function, to store them in the pre-image side of an
unmerged file pair.  Now the function is fixed to return the filepair it
queued, we can make the caller on the special case codepath to do so.

Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-04-23 22:34:43 -07:00
Junio C Hamano
76399c0195 diff.c: return filepair from diff_unmerge()
The underlying diff_queue() returns diff_filepair so that the caller can
further add information to it, and the helper function diff_unmerge()
utilizes the feature itself, but does not expose it to its callers, which
was kind of selfish.

Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-04-23 22:34:43 -07:00
Johan Herland
2ca8671470 --dirstat: In case of renames, use target filename instead of source filename
This changes --dirstat analysis to count "damage" toward the target filename,
rather than the source filename. For renames within a directory, this won't
matter to the final output, but when moving files between diretories, the
output now lists the target directory rather than the source directory.

Signed-off-by: Johan Herland <johan@herland.net>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-04-12 11:29:34 -07:00
Johan Herland
2ff3a80334 Teach --dirstat not to completely ignore rearranged lines within a file
Currently, the --dirstat analysis ignores when lines within a file are
rearranged, because the "damage" calculated by show_dirstat() is 0.
However, if the object name has changed, we already know that there is
some damage, and it is unintuitive to claim there is _no_ damage.

Teach show_dirstat() to assign a minimum amount of damage (== 1) to
entries for which the analysis otherwise yields zero damage, to still
represent that these files are changed, instead of saying that there
is no change.

Also, skip --dirstat analysis when the object names are the same (e.g. for
a pure file rename).

Signed-off-by: Johan Herland <johan@herland.net>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-04-11 11:16:15 -07:00
Johan Herland
0133dab75d --dirstat-by-file: Make it faster and more correct
Currently, when using --dirstat-by-file, it first does the full --dirstat
analysis (using diffcore_count_changes()), and then resets 'damage' to 1,
if any damage was found by diffcore_count_changes().

But --dirstat-by-file is not interested in the file damage per se. It only
cares if the file changed at all. In that sense it only cares if the blob
object for a file has changed. We therefore only need to compare the
object names of each file pair in the diff queue and we can skip the
entire --dirstat analysis and simply set 'damage' to 1 for each entry
where the object name has changed.

This makes --dirstat-by-file faster, and also bypasses --dirstat's practice
of ignoring rearranged lines within a file.

The patch also contains an added testcase verifying that --dirstat-by-file
now detects changes that only rearrange lines within a file.

Signed-off-by: Johan Herland <johan@herland.net>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-04-11 10:12:24 -07:00
Junio C Hamano
467ddc14fe git diff -D: omit the preimage of deletes
When reviewing a patch while concentrating primarily on the text after
then change, wading through pages of deleted text involves a cognitive
burden.

Introduce the -D option that omits the preimage text from the patch output
for deleted files.  When used with -B (represent total rewrite as a single
wholesale deletion followed by a single wholesale addition), the preimage
text is also omitted.

To prevent such a patch from being applied by mistake, the output is
designed not to be usable by "git apply" (or GNU "patch"); it is strictly
for human consumption.

It of course is possible to "apply" such a patch by hand, as a human can
read the intention out of such a patch.  It however is impossible to apply
such a patch even manually in reverse, as the whole point of this option
is to omit the information necessary to do so from the output.

Initial request by Mart Sõmermaa, documentation and tests helped by
Michael J Gruber.

Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-04-02 23:52:20 -07:00
Junio C Hamano
f31027c99c diffcore-rename: fall back to -C when -C -C busts the rename limit
When there are too many paths in the project, the number of rename source
candidates "git diff -C -C" finds will exceed the rename detection limit,
and no inexact rename detection is performed.  We however could fall back
to "git diff -C" if the number of modified paths is sufficiently small.

Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-22 14:29:07 -07:00
Johannes Schindelin
c0aa335c95 Remove unused variables
Noticed by gcc 4.6.0.

Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-22 11:43:27 -07:00
Stephen Boyd
c2e86addb8 Fix sparse warnings
Fix warnings from 'make check'.

 - These files don't include 'builtin.h' causing sparse to complain that
   cmd_* isn't declared:

   builtin/clone.c:364, builtin/fetch-pack.c:797,
   builtin/fmt-merge-msg.c:34, builtin/hash-object.c:78,
   builtin/merge-index.c:69, builtin/merge-recursive.c:22
   builtin/merge-tree.c:341, builtin/mktag.c:156, builtin/notes.c:426
   builtin/notes.c:822, builtin/pack-redundant.c:596,
   builtin/pack-refs.c:10, builtin/patch-id.c:60, builtin/patch-id.c:149,
   builtin/remote.c:1512, builtin/remote-ext.c:240,
   builtin/remote-fd.c:53, builtin/reset.c:236, builtin/send-pack.c:384,
   builtin/unpack-file.c:25, builtin/var.c:75

 - These files have symbols which should be marked static since they're
   only file scope:

   submodule.c:12, diff.c:631, replace_object.c:92, submodule.c:13,
   submodule.c:14, trace.c:78, transport.c:195, transport-helper.c:79,
   unpack-trees.c:19, url.c:3, url.c:18, url.c:104, url.c:117, url.c:123,
   url.c:129, url.c:136, thread-utils.c:21, thread-utils.c:48

 - These files redeclare symbols to be different types:

   builtin/index-pack.c:210, parse-options.c:564, parse-options.c:571,
   usage.c:49, usage.c:58, usage.c:63, usage.c:72

 - These files use a literal integer 0 when they really should use a NULL
   pointer:

   daemon.c:663, fast-import.c:2942, imap-send.c:1072, notes-merge.c:362

While we're in the area, clean up some unused #includes in builtin files
(mostly exec_cmd.h).

Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-22 10:16:54 -07:00