Rename fetch.credentialsInUrl to transfer.credentialsInUrl as the
single configuration variable should work both in pushing and
fetching.
* ab/credentials-in-url-more:
transfer doc: move fetch.credentialsInUrl to "transfer" config namespace
fetch doc: note "pushurl" caveat about "credentialsInUrl", elaborate
Improve test coverage with a handful of tests.
* ds/more-test-coverage:
cache-tree: remove cache_tree_find_path()
pack-write: drop always-NULL parameter
t5329: test 'git gc --cruft' without '--prune=now'
t2107: test 'git update-index --verbose'
The code added 0cc05b044f (usage.c: add a non-fatal bug() function to go
with BUG(), 2022-06-02) sets up two va_list variables: one to output to
stderr, and one to trace2. But the order of initialization is wrong:
va_list ap, cp;
va_copy(cp, ap);
va_start(ap, fmt);
We copy the contents of "ap" into "cp" before it is initialized, meaning
it is full of garbage. The two should be swapped.
However, there's another bug, noticed by Johannes Schindelin: we forget
to call va_end() for the copy. So instead of just fixing the copy's
initialization, let's do two separate start/end pairs. This is allowed
by the standard, and we don't need to use copy here since we have access
to the original varargs. Matching the pairs with the calls makes it more
obvious that everything is being done correctly.
Note that we do call bug_fl() in the tests, but it didn't trigger this
problem because our format string doesn't have any placeholders. So even
though we were passing a garbage va_list through the stack, nobody ever
needed to look at it. We can easily adjust one of the trace2 tests to
trigger this, both for bug() and for BUG(). The latter isn't broken, but
it's nice to exercise both a bit more. Without the fix in this patch
(but with the test change), the bug() case causes a segfault.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace a 'git repack --cruft -d' with the wrapper 'git gc --cruft' to
exercise some logic in builtin/gc.c that adds the '--cruft' option to
the underlying 'git repack' command.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The '--verbose' option reports what is being added and removed from the
index, but has not been tested up to this point. Augment the tests in
t2107 to check the '--verbose' option in some scenarios.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 5dccd9155f (t/perf: add iteration setup mechanism to perf-lib,
2022-04-04) modified the parameter parsing of test_wrapper() such that
the test title was no longer in $1, and is instead in $test_title_.
We correctly pass the new variable to the code which outputs the title
to the log, but missed the spot in test_wrapper() where the title is
written to the ".descr" file which is used to produce the final output
table. As a result, all of the titles are missing from that table (or
worse, using whatever was left in $1):
$ ./p0000-perf-lib-sanity.sh
[...]
Test this tree
------------------------------
0000.1: 0.01(0.01+0.00)
0000.2: 0.01(0.00+0.01)
0000.4: 0.00(0.00+0.00)
0000.5: true 0.00(0.00+0.00)
0000.7: 0.00(0.00+0.00)
0000.8: 0.00(0.00+0.00)
After this patch, we get the pre-5dccd9155f output:
Test this tree
--------------------------------------------------------------------------
0000.1: test_perf_default_repo works 0.00(0.00+0.00)
0000.2: test_checkout_worktree works 0.01(0.00+0.01)
0000.4: export a weird var 0.00(0.00+0.00)
0000.5: éḿíẗ ńöń-ÁŚĆÍÍ ćḧáŕáćẗéŕś 0.00(0.00+0.00)
0000.7: important variables available in subshells 0.00(0.00+0.00)
0000.8: test-lib-functions correctly loaded in subshells 0.00(0.00+0.00)
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git revert" learns "--reference" option to use more human-readable
reference to the commit it reverts in the message template it
prepares for the user.
* jc/revert-show-parent-info:
revert: --reference should apply only to 'revert', not 'cherry-pick'
revert: optionally refer to commit in the "reference" format
Add and use a LIBCURL prerequisite for tests added in
6dcbdc0d66 (remote: create fetch.credentialsInUrl config,
2022-06-06).
These tests would get as far as emitting a couple of the warnings we
were testing for, but would then die as we had no "git-remote-https"
program compiled.
It would be more consistent with other prerequisites (e.g. PERL for
NO_PERL) to name this "CURL", but since e9184b0789 (t5561: skip tests
if curl is not available, 2018-04-03) we've had that prerequisite
defined for checking of we have the curl(1) program.
The existing "CURL" prerequisite is only used in one place, and we
should probably name it "CURL_PROGRAM", then rename "LIBCURL" to
"CURL" as a follow-up, but for now (pre-v2.37.0) let's aim for the
most minimal fix possible.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename the "fetch.credentialsInUrl" configuration variable introduced
in 6dcbdc0d66 (remote: create fetch.credentialsInUrl config,
2022-06-06) to "transfer".
There are existing exceptions, but generally speaking the
"<namespace>.<var>" configuration should only apply to command
described in the "namespace" (and its sub-commands, so e.g. "clone.*"
or "fetch.*" might also configure "git-remote-https").
But in the case of "fetch.credentialsInUrl" we've got a configuration
variable that configures the behavior of all of "clone", "push" and
"fetch", someone adjusting "fetch.*" configuration won't expect to
have the behavior of "git push" altered, especially as we have the
pre-existing "{transfer,fetch,receive}.fsckObjects", which configures
different parts of the transfer dialog.
So let's move this configuration variable to the "transfer" namespace
before it's exposed in a release. We could add all of
"{transfer,fetch,pull}.credentialsInUrl" at some other time, but once
we have "fetch" configure "pull" such an arrangement would would be a
confusing mess, as we'd at least need to have "fetch" configure
"push" (but not the other way around), or change existing behavior.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix an issue that existed before 0527ccb1b5 (add -i: default to the
built-in implementation, 2021-11-30), but which became the default
with that change, we should not be marking tests that are known to
pass as "TODO" tests.
When GIT_TEST_ADD_I_USE_BUILTIN=1 was made the default we started
passing the tests added in 0f0fba2cc8 (t3701: add a test for advanced
split-hunk editing, 2019-12-06) and 1bf01040f0 (add -p: demonstrate
failure when running 'edit' after a split, 2015-04-16).
Thus we've been emitting this sort of output:
$ prove ./t3701-add-interactive.sh
./t3701-add-interactive.sh .. ok
All tests successful.
Test Summary Report
-------------------
./t3701-add-interactive.sh (Wstat: 0 Tests: 70 Failed: 0)
TODO passed: 45, 47
Files=1, Tests=70, 2 wallclock secs ( 0.03 usr 0.00 sys + 0.86 cusr 0.33 csys = 1.22 CPU)
Result: PASS
Which isn't just cosmetic, but due to issues with
test_expect_failure (see [1]) we could e.g. be hiding something as bad
as a segfault in the new implementation. It makes sense catch that,
especially before we put out a release with the built-in "add -i", so
let's generalize the check we were already doing in 0527ccb1b5 with a
new "ADD_I_USE_BUILTIN" prerequisite.
1. https://lore.kernel.org/git/patch-1.7-4624abc2591-20220318T002951Z-avarab@gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "fetch.credentialsInUrl" configuration variable controls what
happens when a URL with embedded login credential is used.
* ds/credentials-in-url:
remote: create fetch.credentialsInUrl config
Updating the graft information invalidates the list of parents of
in-core commit objects that used to be in the graft file.
* jt/unparse-commit-upon-graft-change:
commit,shallow: unparse commits if grafts changed
In Git 2.36 we revamped the way how hooks are invoked. One change
that is end-user visible is that the output of a hook is no longer
directly connected to the standard output of "git" that spawns the
hook, which was noticed post release. This is getting corrected.
* ab/hooks-regression-fix:
hook API: fix v2.36.0 regression: hooks should be connected to a TTY
run-command: add an "ungroup" option to run_process_parallel()
"git -c diff.submodule=log range-diff" did not show anything for
submodules that changed in the ranges being compared, and
"git -c diff.submodule=diff range-diff" did not work correctly.
Fix this by including the "--submodule=short" output
unconditionally to be compared.
* pb/range-diff-with-submodule:
range-diff: show submodule changes irrespective of diff.submodule
A new bug() and BUG_if_bug() API is introduced to make it easier to
uniformly log "detect multiple bugs and abort in the end" pattern.
* ab/bug-if-bug:
cache-tree.c: use bug() and BUG_if_bug()
receive-pack: use bug() and BUG_if_bug()
parse-options.c: use optbug() instead of BUG() "opts" check
parse-options.c: use new bug() API for optbug()
usage.c: add a non-fatal bug() function to go with BUG()
common-main.c: move non-trace2 exit() behavior out of trace2.c
More fsmonitor--daemon.
* jh/builtin-fsmonitor-part3: (30 commits)
t7527: improve implicit shutdown testing in fsmonitor--daemon
fsmonitor--daemon: allow --super-prefix argument
t7527: test Unicode NFC/NFD handling on MacOS
t/lib-unicode-nfc-nfd: helper prereqs for testing unicode nfc/nfd
t/helper/hexdump: add helper to print hexdump of stdin
fsmonitor: on macOS also emit NFC spelling for NFD pathname
t7527: test FSMonitor on case insensitive+preserving file system
fsmonitor: never set CE_FSMONITOR_VALID on submodules
t/perf/p7527: add perf test for builtin FSMonitor
t7527: FSMonitor tests for directory moves
fsmonitor: optimize processing of directory events
fsm-listen-darwin: shutdown daemon if worktree root is moved/renamed
fsm-health-win32: force shutdown daemon if worktree root moves
fsm-health-win32: add polling framework to monitor daemon health
fsmonitor--daemon: stub in health thread
fsmonitor--daemon: rename listener thread related variables
fsmonitor--daemon: prepare for adding health thread
fsmonitor--daemon: cd out of worktree root
fsm-listen-darwin: ignore FSEvents caused by xattr changes on macOS
unpack-trees: initialize fsmonitor_has_run_once in o->result
...
A misconfigured 'branch..remote' led to a bug in configuration
parsing.
* gc/zero-length-branch-config-fix:
remote.c: reject 0-length branch names
remote.c: don't BUG() on 0-length branch names
Rename .env_array member to .env in the child_process structure.
* ab/env-array:
run-command API users: use "env" not "env_array" in comments & names
run-command API: rename "env_array" to "env"
Test that "git config --show-scope" shows the "worktree" scope, and add
it to the list of scopes in Documentation/git-config.txt.
"git config --help" does not need to be updated because it already
mentions "worktree".
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A git subcommand like "git add -p" spawns a separate git process
while relaying its command line arguments. A pathspec with only
negative elements was mistakenly passed with an empty string, which
has been corrected.
* jc/all-negative-pathspec:
pathspec: correct an empty string used as a pathspec element
Implementation of "scalar diagnose" subcommand.
* js/scalar-diagnose:
scalar: teach `diagnose` to gather loose objects information
scalar: teach `diagnose` to gather packfile info
scalar diagnose: include disk space information
scalar: implement `scalar diagnose`
scalar: validate the optional enlistment argument
archive --add-virtual-file: allow paths containing colons
archive: optionally add "virtual" files
Update the GitHub workflow support to make it quicker to get to the
failing test.
* js/ci-github-workflow-markup:
ci: call `finalize_test_case_output` a little later
ci(github): mention where the full logs can be found
ci: use `--github-workflow-markup` in the GitHub workflow
ci(github): avoid printing test case preamble twice
ci(github): skip the logs of the successful test cases
ci: optionally mark up output in the GitHub workflow
ci/run-build-and-tests: add some structure to the GitHub workflow output
ci: make it easier to find failed tests' logs in the GitHub workflow
ci/run-build-and-tests: take a more high-level view
test(junit): avoid line feeds in XML attributes
tests: refactor --write-junit-xml code
ci: fix code style
Plug the memory leaks from the trickiest API of all, the revision
walker.
* ab/plug-leak-in-revisions: (27 commits)
revisions API: add a TODO for diff_free(&revs->diffopt)
revisions API: have release_revisions() release "topo_walk_info"
revisions API: have release_revisions() release "date_mode"
revisions API: call diff_free(&revs->pruning) in revisions_release()
revisions API: release "reflog_info" in release revisions()
revisions API: clear "boundary_commits" in release_revisions()
revisions API: have release_revisions() release "prune_data"
revisions API: have release_revisions() release "grep_filter"
revisions API: have release_revisions() release "filter"
revisions API: have release_revisions() release "cmdline"
revisions API: have release_revisions() release "mailmap"
revisions API: have release_revisions() release "commits"
revisions API users: use release_revisions() for "prune_data" users
revisions API users: use release_revisions() with UNLEAK()
revisions API users: use release_revisions() in builtin/log.c
revisions API users: use release_revisions() in http-push.c
revisions API users: add "goto cleanup" for release_revisions()
stash: always have the owner of "stash_info" free it
revisions API users: use release_revisions() needing REV_INFO_INIT
revision.[ch]: document and move code declared around "init"
...
Fix a regression reported[1] against f443246b9f (commit: convert
{pre-commit,prepare-commit-msg} hook to hook.h, 2021-12-22): Due to
using the run_process_parallel() API in the earlier 96e7225b31 (hook:
add 'run' subcommand, 2021-12-22) we'd capture the hook's stderr and
stdout, and thus lose the connection to the TTY in the case of
e.g. the "pre-commit" hook.
As a preceding commit notes GNU parallel's similar --ungroup option
also has it emit output faster. While we're unlikely to have hooks
that emit truly massive amounts of output (or where the performance
thereof matters) it's still informative to measure the overhead. In a
similar "seq" test we're now ~30% faster:
$ cat .git/hooks/seq-hook; git hyperfine -L rev origin/master,HEAD~0 -s 'make CFLAGS=-O3' './git hook run seq-hook'
#!/bin/sh
seq 100000000
Benchmark 1: ./git hook run seq-hook' in 'origin/master
Time (mean ± σ): 787.1 ms ± 13.6 ms [User: 701.6 ms, System: 534.4 ms]
Range (min … max): 773.2 ms … 806.3 ms 10 runs
Benchmark 2: ./git hook run seq-hook' in 'HEAD~0
Time (mean ± σ): 603.4 ms ± 1.6 ms [User: 573.1 ms, System: 30.3 ms]
Range (min … max): 601.0 ms … 606.2 ms 10 runs
Summary
'./git hook run seq-hook' in 'HEAD~0' ran
1.30 ± 0.02 times faster than './git hook run seq-hook' in 'origin/master'
1. https://lore.kernel.org/git/CA+dzEBn108QoMA28f0nC8K21XT+Afua0V2Qv8XkR8rAeqUCCZw@mail.gmail.com/
Reported-by: Anthony Sottile <asottile@umich.edu>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
[jc: minor fix-up to tests for consistency]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extend the parallel execution API added in c553c72eed (run-command:
add an asynchronous parallel child processor, 2015-12-15) to support a
mode where the stdout and stderr of the processes isn't captured and
output in a deterministic order, instead we'll leave it to the kernel
and stdio to sort it out.
This gives the API same functionality as GNU parallel's --ungroup
option. As we'll see in a subsequent commit the main reason to want
this is to support stdout and stderr being connected to the TTY in the
case of jobs=1, demonstrated here with GNU parallel:
$ parallel --ungroup 'test -t {} && echo TTY || echo NTTY' ::: 1 2
TTY
TTY
$ parallel 'test -t {} && echo TTY || echo NTTY' ::: 1 2
NTTY
NTTY
Another is as GNU parallel's documentation notes a potential for
optimization. As demonstrated in next commit our results with "git
hook run" will be similar, but generally speaking this shows that if
you want to run processes in parallel where the exact order isn't
important this can be a lot faster:
$ hyperfine -r 3 -L o ,--ungroup 'parallel {o} seq ::: 10000000 >/dev/null '
Benchmark 1: parallel seq ::: 10000000 >/dev/null
Time (mean ± σ): 220.2 ms ± 9.3 ms [User: 124.9 ms, System: 96.1 ms]
Range (min … max): 212.3 ms … 230.5 ms 3 runs
Benchmark 2: parallel --ungroup seq ::: 10000000 >/dev/null
Time (mean ± σ): 154.7 ms ± 0.9 ms [User: 136.2 ms, System: 25.1 ms]
Range (min … max): 153.9 ms … 155.7 ms 3 runs
Summary
'parallel --ungroup seq ::: 10000000 >/dev/null ' ran
1.42 ± 0.06 times faster than 'parallel seq ::: 10000000 >/dev/null '
A large part of the juggling in the API is to make the API safer for
its maintenance and consumers alike.
For the maintenance of the API we e.g. avoid malloc()-ing the
"pp->pfd", ensuring that SANITIZE=address and other similar tools will
catch any unexpected misuse.
For API consumers we take pains to never pass the non-NULL "out"
buffer to an API user that provided the "ungroup" option. The
resulting code in t/helper/test-run-command.c isn't typical of such a
user, i.e. they'd typically use one mode or the other, and would know
whether they'd provided "ungroup" or not.
We could also avoid the strbuf_init() for "buffered_output" by having
"struct parallel_processes" use a static PARALLEL_PROCESSES_INIT
initializer, but let's leave that cleanup for later.
Using a global "run_processes_parallel_ungroup" variable to enable
this option is rather nasty, but is being done here to produce as
minimal of a change as possible for a subsequent regression fix. This
change is extracted from a larger initial version[1] which ends up
with a better end-state for the API, but in doing so needed to modify
all existing callers of the API. Let's defer that for now, and
narrowly focus on what we need for fixing the regression in the
subsequent commit.
It's safe to do this with a global variable because:
A) hook.c is the only user of it that sets it to non-zero, and before
we'll get any other API users we'll refactor away this method of
passing in the option, i.e. re-roll [1].
B) Even if hook.c wasn't the only user we don't have callers of this
API that concurrently invoke this parallel process starting API
itself in parallel.
As noted above "A" && "B" are rather nasty, and we don't want to live
with those caveats long-term, but for now they should be an acceptable
compromise.
1. https://lore.kernel.org/git/cover-v2-0.8-00000000000-20220518T195858Z-avarab@gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After generating diffs for each range to be compared using a 'git log'
invocation, range-diff.c::read_patches looks for the "diff --git" header
in those diffs to recognize the beginning of a new change.
In a project with submodules, and with 'diff.submodule=log' set in the
config, this header is missing for the diff of a changed submodule, so
any submodule changes are quietly ignored in the range-diff.
When 'diff.submodule=diff' is set in the config, the "diff --git" header
is also missing for the submodule itself, but is shown for submodule
content changes, which can easily confuse 'git range-diff' and lead to
errors such as:
error: git apply: bad git-diff - inconsistent old filename on line 1
error: could not parse git header 'diff --git path/to/submodule/and/some/file/within
'
error: could not parse log for '@{u}..@{1}'
Force the submodule diff format to its default ("short") when invoking
'git log' to generate the patches for each range, such that submodule
changes are always detected.
Add a test, including an invocation with '--creation-factor=100' to
force the second commit in the range not to be considered a complete
rewrite, in order to verify we do indeed get the "short" format.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a commit is parsed, it pretends to have a different (possibly
empty) list of parents if there is graft information for that commit.
But there is a bug that could occur when a commit is parsed, the graft
information is updated (for example, when a shallow file is rewritten),
and the same commit is subsequently used: the parents of the commit do
not conform to the updated graft information, but the information at the
time of parsing.
This is usually not an issue, as a commit is usually introduced into the
repository at the same time as its graft information. That means that
when we try to parse that commit, we already have its graft information.
But it is an issue when fetching a shallow point directly into a
repository with submodules. The function
assign_shallow_commits_to_refs() parses all sought objects (including
the shallow point, which we are directly fetching). In update_shallow()
in fetch-pack.c, assign_shallow_commits_to_refs() is called before
commit_shallow_file(), which means that the shallow point would have
been parsed before graft information is updated. Once a commit is
parsed, it is no longer sensitive to any graft information updates. This
parsed commit is subsequently used when we do a revision walk to search
for submodules to fetch, meaning that the commit is considered to have
parents even though it is a shallow point (and therefore should be
treated as having no parents).
Therefore, whenever graft information is updated, mark the commits that
were previously grafts and the commits that are newly grafts as
unparsed.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Users sometimes provide a "username:password" combination in their
plaintext URLs. Since Git stores these URLs in plaintext in the
.git/config file, this is a very insecure way of storing these
credentials. Credential managers are a more secure way of storing this
information.
System administrators might want to prevent this kind of use by users on
their machines.
Create a new "fetch.credentialsInUrl" config option and teach Git to
warn or die when seeing a URL with this kind of information. The warning
anonymizes the sensitive information of the URL to be clear about the
issue.
This change currently defaults the behavior to "allow" which does
nothing with these URLs. We can consider changing this behavior to
"warn" by default if we wish. At that time, we may want to add some
advice about setting fetch.credentialsInUrl=ignore for users who still
want to follow this pattern (and not receive the warning).
An earlier version of this change injected the logic into
url_normalize() in urlmatch.c. While most code paths that parse URLs
eventually normalize the URL, that normalization does not happen early
enough in the stack to avoid attempting connections to the URL first. By
inserting a check into the remote validation, we identify the issue
before making a connection. In the old code path, this was revealed by
testing the new t5601-clone.sh test under --stress, resulting in an
instance where the return code was 13 (SIGPIPE) instead of 128 from the
die().
However, we can reuse the parsing information from url_normalize() in
order to benefit from its well-worn parsing logic. We can use the struct
url_info that is created in that method to replace the password with
"<redacted>" in our error messages. This comes with a slight downside
that the normalized URL might look slightly different from the input URL
(for instance, the normalized version adds a closing slash). This should
not hinder users figuring out what the problem is and being able to fix
the issue.
As an attempt to ensure the parsing logic did not catch any
unintentional cases, I modified this change locally to to use the "die"
option by default. Running the test suite succeeds except for the
explicit username:password URLs used in t5550-http-fetch-dumb.sh and
t5541-http-push-smart.sh. This means that all other tested URLs did not
trigger this logic.
The tests show that the proper error messages appear (or do not
appear), but also count the number of error messages. When only warning,
each process validates the remote URL and outputs a warning. This
happens twice for clone, three times for fetch, and once for push.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A mechanism to pack unreachable objects into a "cruft pack",
instead of ejecting them into loose form to be reclaimed later, has
been introduced.
* tb/cruft-packs:
sha1-file.c: don't freshen cruft packs
builtin/gc.c: conditionally avoid pruning objects via loose
builtin/repack.c: add cruft packs to MIDX during geometric repack
builtin/repack.c: use named flags for existing_packs
builtin/repack.c: allow configuring cruft pack generation
builtin/repack.c: support generating a cruft pack
builtin/pack-objects.c: --cruft with expiration
reachable: report precise timestamps from objects in cruft packs
reachable: add options to add_unseen_recent_objects_to_traversal
builtin/pack-objects.c: --cruft without expiration
builtin/pack-objects.c: return from create_object_entry()
t/helper: add 'pack-mtimes' test-tool
pack-mtimes: support writing pack .mtimes files
chunk-format.h: extract oid_version()
pack-write: pass 'struct packing_data' to 'stage_tmp_packfiles'
pack-mtimes: support reading .mtimes files
Documentation/technical: add cruft-packs.txt
Teach "git repack --geometric" work better with "--keep-pack" and
avoid corrupting the repository when packsize limit is used.
* tb/geom-repack-with-keep-and-max:
builtin/repack.c: ensure that `names` is sorted
t7703: demonstrate object corruption with pack.packSizeLimit
repack: respect --keep-pack with geometric repack
"sparse-checkout" learns to work well with the sparse-index
feature.
* ds/sparse-sparse-checkout:
sparse-checkout: integrate with sparse index
p2000: add test for 'git sparse-checkout [add|set]'
sparse-index: complete partial expansion
sparse-index: partially expand directories
sparse-checkout: --no-sparse-index needs a full index
cache-tree: implement cache_tree_find_path()
sparse-index: introduce partially-sparse indexes
sparse-index: create expand_index()
t1092: stress test 'git sparse-checkout set'
t1092: refactor 'sparse-index contents' test
Introduce a filesystem-dependent mechanism to optimize the way the
bits for many loose object files are ensured to hit the disk
platter.
* ns/batch-fsync:
core.fsyncmethod: performance tests for batch mode
t/perf: add iteration setup mechanism to perf-lib
core.fsyncmethod: tests for batch mode
test-lib-functions: add parsing helpers for ls-files and ls-tree
core.fsync: use batch mode and sync loose objects by default on Windows
unpack-objects: use the bulk-checkin infrastructure
update-index: use the bulk-checkin infrastructure
builtin/add: add ODB transaction around add_files_to_cache
cache-tree: use ODB transaction around writing a tree
core.fsyncmethod: batched disk flushes for loose-objects
bulk-checkin: rebrand plug/unplug APIs as 'odb transactions'
bulk-checkin: rename 'state' variable and separate 'plugged' boolean
Deprecate non-cone mode of the sparse-checkout feature.
* en/sparse-cone-becomes-default:
Documentation: some sparsity wording clarifications
git-sparse-checkout.txt: mark non-cone mode as deprecated
git-sparse-checkout.txt: flesh out pattern set sections a bit
git-sparse-checkout.txt: add a new EXAMPLES section
git-sparse-checkout.txt: shuffle some sections and mark as internal
git-sparse-checkout.txt: update docs for deprecation of 'init'
git-sparse-checkout.txt: wording updates for the cone mode default
sparse-checkout: make --cone the default
tests: stop assuming --no-cone is the default mode for sparse-checkout
Add a test for the regression introduced in my 9c4d58ff2c (ls-tree:
split up "fast path" callbacks, 2022-03-23) and fixed in
350296cc78 (ls-tree: `-l` should not imply recursive listing,
2022-04-04), and test for the test of ls-tree option/mode combinations
to make sure we don't have other blind spots.
The setup for these tests can be shared with those added in the
1041d58b4d (Merge branch 'tl/ls-tree-oid-only', 2022-04-04) topic, so
let's create a new t/lib-t3100.sh to help them share data.
The existing tests in "t3104-ls-tree-format.sh" didn't deal with a
submodule, which they'll now encounter with as the
setup_basic_ls_tree_data() sets one up.
This extensive testing should give us confidence that there were no
further regressions in this area. The lack of testing was noted back
in [1], but unfortunately we didn't cover that blind-spot before
9c4d58ff2c.
1. https://lore.kernel.org/git/211115.86o86lqe3c.gmgdl@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Start following-up on the rename mentioned in c7c4bdeccf (run-command
API: remove "env" member, always use "env_array", 2021-11-25) of
"env_array" to "env".
The "env_array" name was picked in 19a583dc39 (run-command: add
env_array, an optional argv_array for env, 2014-10-19) because "env"
was taken. Let's not forever keep the oddity of "*_array" for this
"struct strvec", but not for its "args" sibling.
This commit is almost entirely made with a coccinelle rule[1]. The
only manual change here is in run-command.h to rename the struct
member itself and to change "env_array" to "env" in the
CHILD_PROCESS_INIT initializer.
The rest of this is all a result of applying [1]:
* make contrib/coccinelle/run_command.cocci.patch
* patch -p1 <contrib/coccinelle/run_command.cocci.patch
* git add -u
1. cat contrib/coccinelle/run_command.pending.cocci
@@
struct child_process E;
@@
- E.env_array
+ E.env
@@
struct child_process *E;
@@
- E->env_array
+ E->env
I've avoided changing any comments and derived variable names here,
that will all be done in the next commit.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a bug() function to use in cases where we'd like to indicate a
runtime BUG(), but would like to defer the BUG() call because we're
possibly accumulating more bug() callers to exhaustively indicate what
went wrong.
We already have this sort of facility in various parts of the
codebase, just in the form of ad-hoc re-inventions of the
functionality that this new API provides. E.g. this will be used to
replace optbug() in parse-options.c, and the 'error("BUG:[...]' we do
in a loop in builtin/receive-pack.c.
Unlike the code this replaces we'll log to trace2 with this new bug()
function (as with other usage.c functions, including BUG()), we'll
also be able to avoid calls to xstrfmt() in some cases, as the bug()
function itself accepts variadic sprintf()-like arguments.
Any caller to bug() can follow up such calls with BUG_if_bug(),
which will BUG() out (i.e. abort()) if there were any preceding calls
to bug(), callers can also decide not to call BUG_if_bug() and leave
the resulting BUG() invocation until exit() time. There are currently
no bug() API users that don't call BUG_if_bug() themselves after a
for-loop, but allowing for not calling BUG_if_bug() keeps the API
flexible. As the tests and documentation here show we'll catch missing
BUG_if_bug() invocations in our exit() wrapper.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
According to the HTML Standard FAQ:
“What is the DOCTYPE for modern HTML documents?
In text/html documents:
<!DOCTYPE html>
In documents delivered with an XML media type: no DOCTYPE is required
and its use is generally unnecessary. However, you may use one if you
want (see the following question). Note that the above is well-formed
XML.”
Source: [1]
Gitweb uses an XHTML 1.0 DOCTYPE:
<!DOCTYPE html PUBLIC
"-//W3C//DTD XHTML 1.0 Strict//EN"
"http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
While that DOCTYPE is still valid [2], it has several disadvantages:
1. It’s misleading. If an XML parser uses the DTD at the given link,
then the entities and ⋅ won’t get declared. Instead, the
parser has to use a DTD from the HTML Standard that has nothing to do
with XHTML 1.0 [2].
2. It’s obsolete. XHTML 1.0 was last revised in 2002 and was superseded in
2018 [3].
3. It’s unreliable. Gitweb uses and ⋅ but lets an external file
define them. “[…U]using entity references for characters in XML documents
is unsafe if they are defined in an external file (except for <, >,
&, ", and ').” [4]
[1]: <https://github.com/whatwg/html/blob/main/FAQ.md#what-is-the-doctype-for-modern-html-documents>
[2]: <https://html.spec.whatwg.org/multipage/xhtml.html#parsing-xhtml-documents>
[3]: <https://www.w3.org/TR/xhtml1/#xhtml>
[4]: <https://html.spec.whatwg.org/multipage/xhtml.html#writing-xhtml-documents>
Signed-off-by: Jason Yundt <jason@jasonyundt.email>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Branch names can't be empty, so config keys with an empty branch name,
e.g. "branch..remote", are silently ignored.
Since these config keys will never be useful, make it a fatal error when
remote.c finds a key that starts with "branch." and has an empty
subsection.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
4a2dcb1a08 (remote: die if branch is not found in repository,
2021-11-17) introduced a regression where multiple config entries with
an empty branch name, e.g.
[branch ""]
remote = foo
merge = bar
could cause Git to fail when it tries to look up branch tracking
information.
We parse the config key to get (branch name, branch name length), but
when the branch name subsection is empty, we get a bogus branch name,
e.g. "branch..remote" gives (".remote", 0). We continue to use the bogus
branch name as if it were valid, and prior to 4a2dcb1a08, this wasn't an
issue because length = 0 caused the branch name to effectively be ""
everywhere.
However, that commit handles length = 0 inconsistently when we create
the branch:
- When find_branch() is called to check if the branch exists in the
branch hash map, it interprets a length of 0 to mean that it should
call strlen on the char pointer.
- But the code path that inserts into the branch hash map interprets a
length of 0 to mean that the string is 0-length.
This results in the bug described above:
- "branch..remote" looks for ".remote" in the branch hash map. Since we
do not find it, we insert the "" entry into the hash map.
- "branch..merge" looks for ".merge" in the branch hash map. Since we
do not find it, we again try to insert the "" entry into the hash map.
However, the entries in the branch hash map are supposed to be
appended to, not overwritten.
- Since overwriting an entry is a BUG(), Git fails instead of silently
ignoring the empty branch name.
Fix the bug by removing the convenience strlen functionality, so that
0 means that the string is 0-length. We still insert a bogus branch name
into the hash map, but this will be fixed in a later commit.
Reported-by: "Ing. Martin Prantl Ph.D." <perry@ntis.zcu.cz>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As 'revert' and 'cherry-pick' share a lot of code, it is easy to
modify the behaviour of one command and inadvertently affect the
other. An earlier change to teach the '--reference' option and the
'revert.reference' configuration variable to the former was not
careful enough and 'cherry-pick --reference' wasn't rejected as an
error.
It is possible to think 'cherry-pick -x' might benefit from the
'--reference' option, but it is fundamentally different from
'revert' in at least two ways to make it questionable:
- 'revert' names a commit that is ancestor of the resulting commit,
so an abbreviated object name with human readable title is
sufficient to identify the named commit uniquely without using
the full object name. On the other hand, 'cherry-pick'
usually [*] picks a commit that is not an ancestor. It might be
even picking a private commit that never becomes part of the
public history.
- The whole commit message of 'cherry-pick' is a copy of the
original commit, and there is nothing gained to repeat only the
title part on 'cherry-picked from' message.
[*] well, you could revert and then you can pick the original that
was reverted to get back to where you were, but then you can
revert the revert to do the same thing.
Helped-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git add -i" was rewritten in C some time ago and has been in
testing; the reimplementation is now exposed to general public by
default.
* js/use-builtin-add-i:
add -i: default to the built-in implementation
t2016: require the PERL prereq only when necessary
The tests that ensured merges stop when interfering local changes
are present did not make sure that local changes are preserved; now
they do.
* jc/t6424-failing-merge-preserve-local-changes:
t6424: make sure a failed merge preserves local changes
With the new http.curloptResolve configuration, the CURLOPT_RESOLVE
mechanism that allows cURL based applications to use pre-resolved
IP addresses for the requests is exposed to the scripts.
* cc/http-curlopt-resolve:
http: add custom hostname to IP address resolutions
By allowing the path to be enclosed in double-quotes, we can avoid
the limitation that paths cannot contain colons.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the `--add-virtual-file=<path>:<content>` option, `git archive` now
supports use cases where relatively trivial files need to be added that
do not exist on disk.
This will allow us to generate `.zip` files with generated content,
without having to add said content to the object database and without
having to write it out to disk.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
[jc: tweaked <path> handling]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
