In t4015 we have a pattern of
git diff [<options, related to color>] |
grep -v "index" |
test_decode_color >actual &&
to produce output that we want to test against. This pattern was introduced
in 86b452e276 (diff.c: add dimming to moved line detection, 2017-06-30)
as then the focus on getting the colors right. However the pattern used
is not best practice as we do care about the exit code of Git. So let's
not have Git as the upstream of a pipe. Piping the output of grep to
some function is fine as we assume grep to be un-flawed in our test suite.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no need to forward-declare these functions, as they are used
after their implementation only.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These flags were there since the beginning (3443546f6e (Use a *real*
built-in diff generator, 2006-03-24), but were never used. Remove them.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --chain-lint option uses heuristics and knowledge of shell syntax to
detect broken &&-chains in subshells by pure textual inspection. The
heuristics handle a range of stylistic variations in existing tests
(evolved over the years), however, they are still best-guesses. As such,
it is possible for future changes to accidentally break assumptions upon
which the heuristics are based. Protect against this possibility by
adding tests which check the linter itself for correctness.
In addition to protecting against regressions, these tests help document
(for humans) expected behavior, which is important since the linter's
implementation language ('sed') does not necessarily lend itself to easy
comprehension.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --chain-lint option uses heuristics and knowledge of shell syntax to
detect broken &&-chains in subshells by pure textual inspection. The
heuristics handle a range of stylistic variations in existing tests
(evolved over the years), however, they are still best-guesses. As such,
it is possible for future changes to accidentally break assumptions upon
which the heuristics are based. Protect against this possibility by
adding tests which check the linter itself for correctness.
In addition to protecting against regressions, these tests help document
(for humans) expected behavior, which is important since the linter's
implementation language ('sed') does not necessarily lend itself to easy
comprehension.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --chain-lint option uses heuristics and knowledge of shell syntax to
detect broken &&-chains in subshells by pure textual inspection. The
heuristics handle a range of stylistic variations in existing tests
(evolved over the years), however, they are still best-guesses. As such,
it is possible for future changes to accidentally break assumptions upon
which the heuristics are based. Protect against this possibility by
adding tests which check the linter itself for correctness.
In addition to protecting against regressions, these tests help document
(for humans) expected behavior, which is important since the linter's
implementation language ('sed') does not necessarily lend itself to easy
comprehension.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --chain-lint option uses heuristics and knowledge of shell syntax to
detect broken &&-chains in subshells by pure textual inspection. The
heuristics handle a range of stylistic variations in existing tests
(evolved over the years), however, they are still best-guesses. As such,
it is possible for future changes to accidentally break assumptions upon
which the heuristics are based. Protect against this possibility by
adding tests which check the linter itself for correctness.
In addition to protecting against regressions, these tests help document
(for humans) expected behavior, which is important since the linter's
implementation language ('sed') does not necessarily lend itself to easy
comprehension.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --chain-lint option uses heuristics and knowledge of shell syntax to
detect broken &&-chains in subshells by pure textual inspection. The
heuristics handle a range of stylistic variations in existing tests
(evolved over the years), however, they are still best-guesses. As such,
it is possible for future changes to accidentally break assumptions upon
which the heuristics are based. Protect against this possibility by
adding tests which check the linter itself for correctness.
In addition to protecting against regressions, these tests help document
(for humans) expected behavior, which is important since the linter's
implementation language ('sed') does not necessarily lend itself to easy
comprehension.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --chain-lint option uses heuristics and knowledge of shell syntax to
detect broken &&-chains in subshells by pure textual inspection. The
heuristics handle a range of stylistic variations in existing tests
(evolved over the years), however, they are still best-guesses. As such,
it is possible for future changes to accidentally break assumptions upon
which the heuristics are based. Protect against this possibility by
adding tests which check the linter itself for correctness.
In addition to protecting against regressions, these tests help document
(for humans) expected behavior, which is important since the linter's
implementation language ('sed') does not necessarily lend itself to easy
comprehension.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --chain-lint option uses heuristics and knowledge of shell syntax to
detect broken &&-chains in subshells by pure textual inspection. The
heuristics handle a range of stylistic variations in existing tests
(evolved over the years), however, they are still best-guesses. As such,
it is possible for future changes to accidentally break assumptions upon
which the heuristics are based. Protect against this possibility by
adding tests which check the linter itself for correctness.
In addition to protecting against regressions, these tests help document
(for humans) expected behavior, which is important since the linter's
implementation language ('sed') does not necessarily lend itself to easy
comprehension.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --chain-lint option uses heuristics and knowledge of shell syntax to
detect broken &&-chains in subshells by pure textual inspection. The
heuristics handle a range of stylistic variations in existing tests
(evolved over the years), however, they are still best-guesses. As such,
it is possible for future changes to accidentally break assumptions upon
which the heuristics are based. Protect against this possibility by
adding tests which check the linter itself for correctness.
In addition to protecting against regressions, these tests help document
(for humans) expected behavior, which is important since the linter's
implementation language ('sed') does not necessarily lend itself to easy
comprehension.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --chain-lint option uses heuristics and knowledge of shell syntax to
detect broken &&-chains in subshells by pure textual inspection.
Although the heuristics work well, they are still best-guesses and
future changes could accidentally break assumptions upon which they are
based. To protect against this possibility, tests checking correctness
of the linter itself will be added. As preparation, add a new makefile
"check-chainlint" target and associated machinery.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --chain-lint option detects broken &&-chains by forcing the test to
exit early (as the very first step) with a sentinel value. If that
sentinel is the test's overall exit code, then the &&-chain is intact;
if not, then the chain is broken. Unfortunately, this detection does not
extend to &&-chains within subshells even when the subshell itself is
properly linked into the outer &&-chain.
Address this shortcoming by feeding the body of the test to a
lightweight "linter" which can peer inside subshells and identify broken
&&-chains by pure textual inspection. Although the linter does not
actually parse shell scripts, it has enough knowledge of shell syntax to
reliably deal with formatting style variations (as evolved over the
years) and to avoid being fooled by non-shell content (such as inside
here-docs and multi-line strings). It recognizes modern subshell
formatting:
statement1 &&
(
statement2 &&
statement3
) &&
statement4
as well as old-style:
statement1 &&
(statement2 &&
statement3) &&
statement4
Heuristics are employed to properly identify the extent of a subshell
formatted in the old-style since a number of legitimate constructs may
superficially appear to close the subshell even though they don't. For
example, it understands that neither "x=$(command)" nor "case $x in *)"
end a subshell, despite the ")" at the end of line.
Due to limitations of the tool used ('sed') and its inherent
line-by-line processing, only subshells one level deep are handled, as
well as one-liner subshells one level below that. Subshells deeper than
that or multi-line subshells at level two are passed through as-is, thus
&&-chains in their bodies are not checked.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The variable smtp_encryption must keep it's value between two batches.
Otherwise the authentication is skipped after the first batch.
Signed-off-by: Jules Maselbas <jules.maselbas@grenoble-inp.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One-shot environment variable assignments, such as 'FOO' in
"FOO=bar cmd", exist only during the invocation of 'cmd'. However, if
'cmd' happens to be a shell function, then 'FOO' is assigned in the
executing shell itself, and that assignment remains until the process
exits (unless explicitly unset). Since this side-effect of
"FOO=bar shell_func" is unlikely to be intentional, detect and report
such usage.
To distinguish shell functions from other commands, perform a pre-scan
of shell scripts named as input, gleaning a list of function names by
recognizing lines of the form (loosely matching whitespace):
shell_func () {
and later report suspect lines of the form (loosely matching quoted
values):
FOO=bar [BAR=foo ...] shell_func
Also take care to stitch together incomplete lines (those ending with
"\") since suspect invocations may be split over multiple lines:
FOO=bar BAR=foo \
shell_func
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Error messages emitted by this linting script are long and noisy,
consisting of several sections:
<test-script>:<line#>: error: <explanation>: <failed-shell-text>
The line of failed shell text, usually coming from within a test body,
is often indented by one or two TABs, with the result that the actual
(important) text is separated from <explanation> by a good deal of empty
space. This can make for a difficult read, especially on typical
80-column terminals.
Make the messages more compact and perhaps a bit easier to digest by
folding out the leading whitespace from <failed-shell-text>.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Error messages emitted by this linting script are long and noisy,
consisting of several sections:
<test-script>:<line#>: error: <explanation>: <failed-shell-text>
Many problem explanations ask the reader to "please" use a suggested
alternative, however, such politeness is unnecessary and just adds to
the noise and length of the line, so drop "please" to make the message a
bit more concise.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unlike "FOO=bar cmd" one-shot environment variable assignments
which exist only for the invocation of 'cmd', those assigned by
"FOO=bar shell_func" exist within the running shell and continue to
do so until the process exits (or are explicitly unset). It is
unlikely that this behavior was intended by the test author.
In these particular tests, the "FOO=bar shell_func" invocations are
already in subshells, so the assignments don't last too long, don't
appear to harm subsequent commands in the same subshells, and don't
affect other tests in the same scripts, however, the usage is
nevertheless misleading and poor practice, so fix the tests to assign
and export the environment variables in the usual fashion.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a new negotiation algorithm used during fetch that skips
commits in an effort to find common ancestors faster. The skips grow
similarly to the Fibonacci sequence as the commit walk proceeds further
away from the tips. The skips may cause unnecessary commits to be
included in the packfile, but the negotiation step typically ends more
quickly.
Usage of this algorithm is guarded behind the configuration flag
fetch.negotiationAlgorithm.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test uses a convoluted method to verify that "p4 help" errors
out when asked for help about an unknown command. In doing so, it
intentionally breaks the &&-chain. Simplify by employing the typical
"! command" idiom and a normal &&-chain instead.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test has been dysfunctional since it was added by 6489660b4b
(send-email: support validate hook, 2017-05-12), however, the problem
went unnoticed due to a broken &&-chain late in the test.
The test wants to verify that a non-zero exit code from the
'sendemail-validate' hook causes git-send-email to abort with a
particular error message. A command which is expected to fail should be
run with 'test_must_fail', however, the test neglects to do so.
Fix this problem, as well as the broken &&-chain behind which the
problem hid.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test manually checks the exit code of git-grep for a particular
value. In doing so, it intentionally breaks the &&-chain. Modernize the
test by taking advantage of test_expect_code() and a normal &&-chain.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test has been dysfunctional since it was added by 619acfc78c
(submodule add: extend force flag to add existing repos, 2016-10-06),
however, two problems early in the test went unnoticed due to a broken
&&-chain later in the test.
First, it tries configuring the submodule with repository "bogus-url",
however, "git submodule add" insists that the repository be either an
absolute URL or a relative pathname requiring prefix "./" or "../" (this
is true even with --force), but "bogus-url" does not meet those
criteria, thus the command fails.
Second, it then tries configuring a submodule with a path which is
.gitignore'd, which is disallowed. This restriction can be overridden
with --force, but the test neglects to use that option.
Fix both problems, as well as the broken &&-chain behind which they hid.
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 60f487ac0e (Remove common-cmds.h, 2018-05-10), we forgot to adjust
this README when removing the common-cmds.h file.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Switch several hard-coded constants into expressions based either on
GIT_MAX_HEXSZ or the_hash_algo.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert one use of 20 and several uses of GIT_SHA1_HEXSZ into references
to the_hash_algo.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use GIT_MAX_HEXSZ instead of GIT_SHA1_HEXSZ for an allocation so that it
is sufficiently large. Switch a comparison to use the_hash_algo to
determine the length of a hex object ID.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Switch uses of GIT_SHA1_HEXSZ to use the_hash_algo instead.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert several uses of GIT_SHA1_HEXSZ into references to the_hash_algo.
Switch other uses into a use of parse_oid_hex and uses of its computed
pointer.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Switch from using get_oid_hex to parse_oid_hex to simplify pointer
operations and avoid the need for a hash-related constant.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Switch from using GIT_SHA1_HEXSZ to the_hash_algo to make the parsing of
the index information hash independent.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to ensure we write the correct amount, use the_hash_algo to
find the correct number of bytes for the current hash.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to be sure we have enough space to use with any hash algorithm,
use GIT_MAX_HEXSZ to allocate space.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Specify these constants in terms of the size of the hash algorithm
currently in use.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
