"git commit --allow-empty --only" (no pathspec) with dirty index
ought to be an acceptable way to create a new commit that does not
change any paths, but it was forbidden, perhaps because nobody
needed it so far.
* ak/commit-only-allow-empty:
commit: remove 'Clever' message for --only --amend
commit: make --only --allow-empty work without paths
The behavior is now documented; more importantly, rewarding the user
with a "Wow, you are clever" praise afterwards is not an effective
way to advertise the feature--at that point the user already knows.
Signed-off-by: Andreas Krey <a.krey@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
--only is implied when paths are present, and required
them unless --amend. But with --allow-empty it should
be allowed as well - it is the only way to create an
empty commit in the presence of staged changes.
Signed-off-by: Andreas Krey <a.krey@gmx.de>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Push pptr down into the FROM_MERGE branch of the if/else statement,
where it's actually used, and call commit_list_append() for appending
elements instead of playing tricks with commit_list_insert(). Call
copy_commit_list() in the amend branch instead of open-coding it. Don't
bother setting pptr in the final branch as it's not used thereafter.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When new paths were added by "git add -N" to the index, it was
enough to circumvent the check by "git commit" to refrain from
making an empty commit without "--allow-empty". The same logic
prevented "git status" to show such a path as "new file" in the
"Changes not staged for commit" section.
* nd/ita-empty-commit:
commit: don't be fooled by ita entries when creating initial commit
commit: fix empty commit creation when there's no changes but ita entries
diff: add --ita-[in]visible-in-index
diff-lib: allow ita entries treated as "not yet exist in index"
ita entries are dropped at tree generation phase. If the entire index
consists of just ita entries, the result would be a a commit with no
entries, which should be caught unless --allow-empty is specified. The
test "!!active_nr" is not sufficient to catch this.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If i-t-a entries are present and there is no change between the index
and HEAD i-t-a entries, index_differs_from() still returns "dirty, new
entries" (aka, the resulting commit is not empty), but cache-tree will
skip i-t-a entries and produce the exact same tree of current
commit.
index_differs_from() is supposed to catch this so we can abort
git-commit (unless --no-empty is specified). Update it to optionally
ignore i-t-a entries when doing a diff between the index and HEAD so
that it would return "no change" in this case and abort commit.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git add --chmod=+x <pathspec>" added recently only toggled the
executable bit for paths that are either new or modified. This has
been corrected to flip the executable bit for all paths that match
the given pathspec.
* tg/add-chmod+x-fix:
t3700-add: do not check working tree file mode without POSIXPERM
t3700-add: create subdirectory gently
add: modify already added files when --chmod is given
read-cache: introduce chmod_index_entry
update-index: add test for chmod flags
When the chmod option was added to git add, it was hooked up to the diff
machinery, meaning that it only works when the version in the index
differs from the version on disk.
As the option was supposed to mirror the chmod option in update-index,
which always changes the mode in the index, regardless of the status of
the file, make sure the option behaves the same way in git add.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Enhance "git status --porcelain" output by collecting more data on
the state of the index and the working tree files, which may
further be used to teach git-prompt (in contrib/) to make fewer
calls to git.
* jh/status-v2-porcelain:
status: unit tests for --porcelain=v2
test-lib-functions.sh: add lf_to_nul helper
git-status.txt: describe --porcelain=v2 format
status: print branch info with --porcelain=v2 --branch
status: print per-file porcelain v2 status data
status: collect per-file data for --porcelain=v2
status: support --porcelain[=<version>]
status: cleanup API to wt_status_print
status: rename long-format print routines
Expand porcelain v2 output to include branch and tracking
branch information. This includes the commit id, the branch,
the upstream branch, and the ahead and behind counts.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Collect extra per-file data for porcelain V2 format.
The output of `git status --porcelain` leaves out many
details about the current status that clients might like
to have. This can force them to be less efficient as they
may need to launch secondary commands (and try to match
the logic within git) to accumulate this extra information.
For example, a GUI IDE might want the file mode to display
the correct icon for a changed item (without having to stat
it afterwards).
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git commit --help" said "--no-verify" is only about skipping the
pre-commit hook, and failed to say that it also skipped the
commit-msg hook.
* os/no-verify-skips-commit-msg-too:
commit: describe that --no-verify skips the commit-msg hook in the help text
Update --porcelain argument to take optional version parameter
to allow multiple porcelain formats to be supported in the future.
The token "v1" is the default value and indicates the traditional
porcelain format. (The token "1" is an alias for that.)
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor the API between builtin/commit.c and wt-status.[ch].
Hide the details of the various wt_*status_print() routines inside
wt-status.c behind a single (new) wt_status_print() routine.
Eliminate the switch statements from builtin/commit.c.
Allow details of new status formats to be isolated within wt-status.c
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename the various wt_status_print*() routines to be
wt_longstatus_print*() to make it clear that these
routines are only concerned with the normal/long
status output and reduce developer confusion as other
status formats are added in the future.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git commit --help" said "--no-verify" is only about skipping the
pre-commit hook, and failed to say that it also skipped the
commit-msg hook.
* os/no-verify-skips-commit-msg-too:
commit: describe that --no-verify skips the commit-msg hook in the help text
A helper function that takes the contents of a commit object and
finds its subject line did not ignore leading blank lines, as is
commonly done by other codepaths. Make it ignore leading blank
lines to match.
* js/find-commit-subject-ignore-leading-blanks:
reset --hard: skip blank lines when reporting the commit subject
sequencer: use skip_blank_lines() to find the commit subject
commit -C: skip blank lines at the beginning of the message
commit.c: make find_commit_subject() more robust
pretty: make the skip_blank_lines() function public
This brings the short help in line with the documentation.
Signed-off-by: Orgad Shaneh <orgads@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A helper function that takes the contents of a commit object and
finds its subject line did not ignore leading blank lines, as is
commonly done by other codepaths. Make it ignore leading blank
lines to match.
* js/find-commit-subject-ignore-leading-blanks:
reset --hard: skip blank lines when reporting the commit subject
sequencer: use skip_blank_lines() to find the commit subject
commit -C: skip blank lines at the beginning of the message
commit.c: make find_commit_subject() more robust
pretty: make the skip_blank_lines() function public
Consistent with the pretty-printing machinery, we skip leading blank
lines (if any) of existing commit messages.
While Git itself only produces commit objects with a single empty line
between commit header and commit message, it is legal to have more than
one blank line (i.e. lines containing only white space, or no
characters) at the beginning of the commit message, and the
pretty-printing code already handles that.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a follow up commit for f932729c (memoize common git-path
"constant" files, 10-Aug-2015).
The many function calls to git_path() are replaced by
git_path_commit_editmsg() and which thus eliminates the need to repeatedly
compute the location of "COMMIT_EDITMSG".
Mentored-by: Lars Schneider <larsxschneider@gmail.com>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The executable bit will not be detected (and therefore will not be
set) for paths in a repository with `core.filemode` set to false,
though the users may still wish to add files as executable for
compatibility with other users who _do_ have `core.filemode`
functionality. For example, Windows users adding shell scripts may
wish to add them as executable for compatibility with users on
non-Windows.
Although this can be done with a plumbing command
(`git update-index --add --chmod=+x foo`), teaching the `git-add`
command allows users to set a file executable with a command that
they're already familiar with.
Signed-off-by: Edward Thomson <ethomson@edwardthomson.com>
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git commit" learned to pay attention to "commit.verbose"
configuration variable and act as if "--verbose" option was
given from the command line.
* pb/commit-verbose-config:
commit: add a commit.verbose config variable
t7507-commit-verbose: improve test coverage by testing number of diffs
parse-options.c: make OPTION_COUNTUP respect "unspecified" values
t/t7507: improve test coverage
t0040-parse-options: improve test coverage
test-parse-options: print quiet as integer
t0040-test-parse-options.sh: fix style issues
Add commit.verbose configuration variable as a convenience for those
who always prefer --verbose.
Add tests to check the behavior introduced by this commit and also to
verify that behavior of status doesn't break because of this commit.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git commit" misbehaved in a few minor ways when an empty message
is given via -m '', all of which has been corrected.
* ad/commit-have-m-option:
commit: do not ignore an empty message given by -m ''
commit: --amend -m '' silently fails to wipe message
"git commit" misbehaved in a few minor ways when an empty message
is given via -m '', all of which has been corrected.
* ad/commit-have-m-option:
commit: do not ignore an empty message given by -m ''
commit: --amend -m '' silently fails to wipe message
When "git merge --squash" stopped due to conflict, the concluding
"git commit" failed to read in the SQUASH_MSG that shows the log
messages from all the squashed commits.
* ss/commit-squash-msg:
commit: do not lose SQUASH_MSG contents
When f9568530 (builtin-commit: resurrect behavior for multiple -m
options, 2007-11-11) converted a "char *message" to "struct strbuf
message" to hold the messages given with the "-m" option, it
incorrectly changed the checks "did we get a message with the -m
option?" to "is message.len 0?". Later, we noticed one breakage
from this change and corrected it with 25206778 (commit: don't start
editor if empty message is given with -m, 2013-05-25).
However, "we got a message with -m, even though an empty one, so we
shouldn't be launching an editor" was not the only breakage.
* "git commit --amend -m '' --allow-empty", even though it looks
strange, is a valid request to amend the commit to have no
message at all. Due to the misdetection of the presence of -m on
the command line, we ended up keeping the log messsage from the
original commit.
* "git commit -m "$msg" -F file" should be rejected whether $msg is
an empty string or not, but due to the same bug, was not rejected
when $msg is empty.
* "git -c template=file -m "$msg"" should ignore the template even
when $msg is empty, but it didn't and instead used the contents
from the template file.
Correct these by checking have_option_m, which the earlier 25206778
introduced to fix the same bug.
Reported-by: Adam Dinwoodie <adam@dinwoodie.org>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git merge --squash" stopped due to conflict, the concluding
"git commit" failed to read in the SQUASH_MSG that shows the log
messages from all the squashed commits.
* ss/commit-squash-msg:
commit: do not lose SQUASH_MSG contents
When concluding a conflicted "git merge --squash", the command
failed to read SQUASH_MSG that was prepared by "git merge", and
showed only the "# Conflicts:" list of conflicted paths.
Place the contents from SQUASH_MSG at the beginning, just like we
show the commit log skeleton first when concluding a normal merge,
and then show the "# Conflicts:" list, to help the user write the
log message for the resulting commit.
Test by Junio C Hamano <gitster@pobox.com>.
Signed-off-by: Sven Strickroth <sven@cs-ware.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename detection is a very convenient feature, and new users shouldn't
have to dig in the documentation to benefit from it.
Potential objections to activating rename detection are that it
sometimes fail, and it is sometimes slow. But rename detection is
already activated by default in several cases like "git status" and "git
merge", so activating diff.renames does not fundamentally change the
situation. When the rename detection fails, it now fails consistently
between "git diff" and "git status".
This setting does not affect plumbing commands, hence well-written
scripts will not be affected.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The preliminary clean-up for jc/peace-with-crlf topic.
* jc/strbuf-getline:
strbuf: give strbuf_getline() to the "most text friendly" variant
checkout-index: there are only two possible line terminations
update-index: there are only two possible line terminations
check-ignore: there are only two possible line terminations
check-attr: there are only two possible line terminations
mktree: there are only two possible line terminations
strbuf: introduce strbuf_getline_{lf,nul}()
strbuf: make strbuf_getline_crlf() global
strbuf: miniscule style fix
Some codepaths used fopen(3) when opening a fixed path in $GIT_DIR
(e.g. COMMIT_EDITMSG) that is meant to be left after the command is
done. This however did not work well if the repository is set to
be shared with core.sharedRepository and the umask of the previous
user is tighter. They have been made to work better by calling
unlink(2) and retrying after fopen(3) fails with EPERM.
* js/fopen-harder:
Handle more file writes correctly in shared repos
commit: allow editing the commit message even in shared repos
The strbuf_getline() interface allows a byte other than LF or NUL as
the line terminator, but this is only because I wrote these
codepaths anticipating that there might be a value other than NUL
and LF that could be useful when I introduced line_termination long
time ago. No useful caller that uses other value has emerged.
By now, it is clear that the interface is overly broad without a
good reason. Many codepaths have hardcoded preference to read
either LF terminated or NUL terminated records from their input, and
then call strbuf_getline() with LF or NUL as the third parameter.
This step introduces two thin wrappers around strbuf_getline(),
namely, strbuf_getline_lf() and strbuf_getline_nul(), and
mechanically rewrites these call sites to call either one of
them. The changes contained in this patch are:
* introduction of these two functions in strbuf.[ch]
* mechanical conversion of all callers to strbuf_getline() with
either '\n' or '\0' as the third parameter to instead call the
respective thin wrapper.
After this step, output from "git grep 'strbuf_getline('" would
become a lot smaller. An interim goal of this series is to make
this an empty set, so that we can have strbuf_getline_crlf() take
over the shorter name strbuf_getline().
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It was pointed out by Yaroslav Halchenko that the file containing the
commit message is writable only by the owner, which means that we have
to rewrite it from scratch in a shared repository.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
More transition from "unsigned char[40]" to "struct object_id".
This needed a few merge fixups, but is mostly disentangled from other
topics.
* bc/object-id:
remote: convert functions to struct object_id
Remove get_object_hash.
Convert struct object to object_id
Add several uses of get_object_hash.
object: introduce get_object_hash macro.
ref_newer: convert to use struct object_id
push_refs_with_export: convert to struct object_id
get_remote_heads: convert to struct object_id
parse_fetch: convert to use struct object_id
add_sought_entry_mem: convert to struct object_id
Convert struct ref to use object_id.
sha1_file: introduce has_object_file helper.
Convert all instances of get_object_hash to use an appropriate reference
to the hash member of the oid member of struct object. This provides no
functional change, as it is essentially a macro substitution.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
Convert most instances where the sha1 member of struct object is
dereferenced to use get_object_hash. Most instances that are passed to
functions that have versions taking struct object_id, such as
get_sha1_hex/get_oid_hex, or instances that can be trivially converted
to use struct object_id instead, are not converted.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
Since ec7dbd145 (receive-pack: allow hooks to ignore its
standard input stream) the pre-receive and post-receive
hooks ignore SIGPIPE. Do the same for the remaining hooks
pre-push and post-rewrite, which read from standard input.
The same arguments for ignoring SIGPIPE apply.
Include test by Jeff King which checks that SIGPIPE does not
cause pre-push hook failure. With the use of git update-ref
--stdin it is fast enough to be enabled by default.
Signed-off-by: Clemens Buchacher <clemens.buchacher@intel.com>
Signed-off-by: Jeff King <peff@peff.net>
This function is also used in other builtins than stripspace, so it
makes sense to have it in a more generic place. Since it operates
on an strbuf and the function is declared in strbuf.h, move it to
strbuf.c and add the corresponding prefix to its name, just like
other API functions in the strbuf_* family.
Also switch all current users of stripspace() to the new function
name and keep a temporary wrapper inline function for any topic
branches still using stripspace().
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When re-priming the cache-tree opportunistically while committing
the in-core index as-is, we mistakenly invalidated the in-core
index too aggressively, causing the experimental split-index code
to unnecessarily rewrite the on-disk index file(s).
* dt/commit-preserve-base-index-upon-opportunistic-cache-tree-update:
commit: don't rewrite shared index unnecessarily
Remove a cache invalidation which would cause the shared index to be
rewritten on as-is commits.
When the cache-tree has changed, we need to update it. But we don't
necessarily need to update the shared index. So setting
active_cache_changed to SOMETHING_CHANGED is unnecessary. Instead, we
let update_main_cache_tree just update the CACHE_TREE_CHANGED bit.
In order to test this, make test-dump-split-index not segfault on
missing replace_bitmap/delete_bitmap. This new codepath is not called
now that the test passes, but is necessary to avoid a segfault when the
new test is run with the old builtin/commit.c code.
Signed-off-by: David Turner <dturner@twopensource.com>
Acked-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "lockfile" API has been rebuilt on top of a new "tempfile" API.
* mh/tempfile:
credential-cache--daemon: use tempfile module
credential-cache--daemon: delete socket from main()
gc: use tempfile module to handle gc.pid file
lock_repo_for_gc(): compute the path to "gc.pid" only once
diff: use tempfile module
setup_temporary_shallow(): use tempfile module
write_shared_index(): use tempfile module
register_tempfile(): new function to handle an existing temporary file
tempfile: add several functions for creating temporary files
prepare_tempfile_object(): new function, extracted from create_tempfile()
tempfile: a new module for handling temporary files
commit_lock_file(): use get_locked_file_path()
lockfile: add accessor get_lock_file_path()
lockfile: add accessors get_lock_file_fd() and get_lock_file_fp()
create_bundle(): duplicate file descriptor to avoid closing it twice
lockfile: move documentation to lockfile.h and lockfile.c
One of the most common uses of git_path() is to pass a
constant, like git_path("MERGE_MSG"). This has two
drawbacks:
1. The return value is a static buffer, and the lifetime
is dependent on other calls to git_path, etc.
2. There's no compile-time checking of the pathname. This
is OK for a one-off (after all, we have to spell it
correctly at least once), but many of these constant
strings appear throughout the code.
This patch introduces a series of functions to "memoize"
these strings, which are essentially globals for the
lifetime of the program. We compute the value once, take
ownership of the buffer, and return the cached value for
subsequent calls. cache.h provides a helper macro for
defining these functions as one-liners, and defines a few
common ones for global use.
Using a macro is a little bit gross, but it does nicely
document the purpose of the functions. If we need to touch
them all later (e.g., because we learned how to change the
git_dir variable at runtime, and need to invalidate all of
the stored values), it will be much easier to have the
complete list.
Note that the shared-global functions have separate, manual
declarations. We could do something clever with the macros
(e.g., expand it to a declaration in some places, and a
declaration _and_ a definition in path.c). But there aren't
that many, and it's probably better to stay away from
too-magical macros.
Likewise, if we abandon the C preprocessor in favor of
generating these with a script, we could get much fancier.
E.g., normalizing "FOO/BAR-BAZ" into "git_path_foo_bar_baz".
But the small amount of saved typing is probably not worth
the resulting confusion to readers who want to grep for the
function's definition.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
