Two additional wrappers to cover 3 places where we utilise p4 in piped
form. Found by Tor Arvid Lund.
Signed-off-by: Anand Kumria <wildfire@progsoc.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --tool= long option to "git mergetool" can be completed with:
kdiff3 tkdiff meld xxdiff emerge
vimdiff gvimdiff ecmerge opendiff
Signed-off-by: Lee Marlow <lee.marlow@gmail.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Bring completion up to date with the man page.
Signed-off-by: Eric Raible <raible@gmail.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I am not entirely clear what these parameters do but felt it
useful to call them out in the documentation.
Signed-off-by: Anand Kumria <wildfire@progsoc.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some repositories require authentication and access to certain
hosts. Allow git-p4 to pull this information from the configuration
Signed-off-by: Anand Kumria <wildfire@progsoc.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rather than having three locations where the 'p4' command is built up,
refactor this into the one place. This will, eventually, allow us to
have one place where we modify the evironment or pass extra
command-line options to the 'p4' binary.
Signed-off-by: Anand Kumria <wildfire@progsoc.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Similiar to our 'p4_read_pipe_lines' command, we can isolate
specific changes to the invocation method in the one location
with this change.
Signed-off-by: Anand Kumria <wildfire@progsoc.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that we have the new command, we can utilise it and then
eventually, isolate any changes required to the one place.
Signed-off-by: Anand Kumria <wildfire@progsoc.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This will make it easier to isolate changes to how 'p4' is invoked
(whether with parameters or not, etc.).
Signed-off-by: Anand Kumria <wildfire@progsoc.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It will never trigger anyway because of the first check, and even if it
would, it would not offer the command line option.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add completions for all long options specified in the docs
--dry-run
Signed-off-by: Lee Marlow <lee.marlow@gmail.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add completions for all long options specified in the docs
--cached --deleted --modified --others --ignored
--stage --directory --no-empty-directory --unmerged
--killed --exclude= --exclude-from=
--exclude-per-directory= --exclude-standard
--error-unmatch --with-tree= --full-name
--abbrev --ignored --exclude-per-directory
Signed-off-by: Lee Marlow <lee.marlow@gmail.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add completions for all long options specified in the docs
--format= --list --verbose
--prefix= --remote= --exec=
The --format= long option can be completed with available formats
and the --remote= can be completed with defined remote repositories.
Signed-off-by: Lee Marlow <lee.marlow@gmail.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add branch subcommand to completions and USAGE for git-stash.sh.
Complete stash names for show, apply, drop, pop, and branch.
Add "--index" long option for apply.
Signed-off-by: Lee Marlow <lee.marlow@gmail.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add completions for all long options specified in the docs
--edit --mainline --no-edit --no-commit --signoff
Signed-off-by: Lee Marlow <lee.marlow@gmail.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add completions for all long options specified in the docs
--quiet --bare --template= --shared
--shared={false|true|umask|group|all|world|everybody}
Signed-off-by: Lee Marlow <lee.marlow@gmail.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add completions for all long options specified in the docs
--dry-run --quiet
Signed-off-by: Lee Marlow <lee.marlow@gmail.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add completions for all long options specified in the docs
--local --no-hardlinks --shared --reference
--quiet --no-checkout --bare --mirror --origin
--upload-pack --template= --depth
Signed-off-by: Lee Marlow <lee.marlow@gmail.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add completions for all long options specified in the docs
--cached
--text --ignore-case --word-regexp --invert-match
--full-name
--extended-regexp --basic-regexp --fixed-strings
--files-with-matches --name-only
--files-without-match
--count
--and --or --not --all-match
Signed-off-by: Lee Marlow <lee.marlow@gmail.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Options added: --parents --children --full-history
Signed-off-by: Lee Marlow <lee.marlow@gmail.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
completion for git diff-tree was removed in 5cfb4fe
Signed-off-by: Lee Marlow <lee.marlow@gmail.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename cached __git_commandlist to __git_porcelain_commandlist and
add __git_all_commandlist that only filters out *--* helpers.
Completions for 'git help' will use the __git_all_commandlist, while
the __git_porcelain_commandlist is used for git command completion.
Users who actually read man pages may want to see help for plumbing
commands.
Signed-off-by: Lee Marlow <lee.marlow@gmail.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit d773c631 (bash: offer only paths after '--', 2008-07-08) did the
same for several other git commands, but 'git checkout' went unnoticed.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It previously used the same as 'log', but the options are quite
different and the arguments must be single refs (or globs).
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Options added: --cached --dry-run --ignore-unmatch --quiet
Signed-off-by: Lee Marlow <lee.marlow@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In r27729, libsvn introduced an assert which explicitly
forbids searching the tree at "/". Luckily enough, it
still accepts an empty string "" as the starting point.
http://svn.collab.net/viewvc/svn/trunk/subversion/libsvn_ra/ra_loader.c?r1=27653&r2=27729
Tested against libsvn0-1.5.0-4mdv2009.0 (needs the fix),
libsvn0-1.4.6-5mdv2008.1 (works anyway)
Signed-off-by: P. Christeas <p_christ@hol.gr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-rerere documentation talks about commands that invoke
"git rerere clear" automatically. git am --abort is added and
a typo is fixed additionally.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
At least, this is true in 2007.2, according to the documentation.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This should have been part of 24a2293 (git-blame.el: show the when, who
and what in the minibuffer., 2008-02-12), that changed from using
--pretty=oneline to --pretty=format:... without terminating newline.
Acked-by: David Kågedal <davidk@lysator.liu.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With git-am, it sounds awkward to have the patches in ".git/rebase/",
but for technical reasons, we have to keep the same directory name
for git-am and git-rebase. ".git/rebase-apply" seems to be a good
compromise.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sb/dashless:
Make usage strings dash-less
t/: Use "test_must_fail git" instead of "! git"
t/test-lib.sh: exit with small negagive int is ok with test_must_fail
Conflicts:
builtin-blame.c
builtin-mailinfo.c
builtin-mailsplit.c
builtin-shortlog.c
git-am.sh
t/t4150-am.sh
t/t4200-rerere.sh
* mv/merge-in-c:
reduce_heads(): protect from duplicate input
reduce_heads(): thinkofix
Add a new test for git-merge-resolve
t6021: add a new test for git-merge-resolve
Teach merge.log to "git-merge" again
Build in merge
Fix t7601-merge-pull-config.sh on AIX
git-commit-tree: make it usable from other builtins
Add new test case to ensure git-merge prepends the custom merge message
Add new test case to ensure git-merge reduces octopus parents when possible
Introduce reduce_heads()
Introduce get_merge_bases_many()
Add new test to ensure git-merge handles more than 25 refs.
Introduce get_octopus_merge_bases() in commit.c
git-fmt-merge-msg: make it usable from other builtins
Move read_cache_unmerged() to read-cache.c
Add new test to ensure git-merge handles pull.twohead and pull.octopus
Move parse-options's skip_prefix() to git-compat-util.h
Move commit_list_count() to commit.c
Move split_cmdline() to alias.c
Conflicts:
Makefile
parse-options.c
Since the files generated and used during a rebase are never to be
tracked, they should live in $GIT_DIR. While at it, avoid the rather
meaningless term "dotest" to "rebase", and unhide ".dotest-merge".
This was wished for on the mailing list, but so far unimplemented.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since only 'git' and 'gitk' are in the user's $PATH now we do not
expect users to need completion support for git-fetch, and expect
they will instead rely upon the completion support for 'git fetch'.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sp/maint-bash-completion-optim:
bash completion: Resolve git show ref:path<tab> losing ref: portion
bash completion: Append space after file names have been completed
Add the following long options to be completed with 'git send-email':
--bcc --cc --cc-cmd --chain-reply-to --compose --dry-run
--envelope-sender --from --identity --in-reply-to
--no-chain-reply-to --no-signed-off-by-cc --no-suppress-from
--no-thread --quiet --signed-off-by-cc --smtp-pass --smtp-server
--smtp-server-port --smtp-ssl --smtp-user --subject --suppress-cc
--suppress-from --thread --to
Short ones like --to and --cc are not usable for actual completion
because of the shortness itself and because there are longer ones which
start with same letters (--thread, --compose). It's still useful to have
these shorter options _listed_ when user presses TAB key after typing
two dashes. It gives user an idea what options are available (and --to
and --cc are probably the most commonly used).
Signed-off-by: Teemu Likonen <tlikonen@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Linus reported that the bash completion for git show often dropped
the ref portion of the argument (stuff before the :) when trying
to complete a file name of a file in another branch or tag.
Björn Steinbrink tracked it down to the gvfs completion script
which comes standard on many Fedora Core based systems. That is
removing : from COMP_WORDBREAKS, making readline treat the entire
argument (including the ref) as the name that must be completed.
When the git completion routines supplied a completion of just the
filename, readline replaced everything.
Since Git users often need to use "ref:path" or "ref:ref" sort of
arguments, and expect completion support on both sides of the :
we really want the : in COMP_WORDBREAKS to provide a good user
experience. This is also the default that ships with bash as it
can be useful in other contexts, such as rcp/scp.
We now try to add : back to COMP_WORDBREAKS if it has been removed
by a script that loaded before us. However if this doesn't work
(as the : is stripped after we load) we fallback in the completion
routines to include "ref:" as part of the prefix for completions,
allowing readine to fully insert the argument the user wanted.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When completing `git show origin/maint:Makef<tab>` we should add a
space after the filename has been completed, so that the user can
immediately begin the next argument.
I also added a special case for the symlink variant so we treat it
just like a normal blob, as there are no items below it in the Git
tree structure.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sp/maint-bash-completion-optim:
bash completion: Don't offer "a.." as a completion for "a."
bash completion: Improve responsiveness of git-log completion
If the user is trying to complete "v1.5.3.<tab>" to see all of
the available maintenance releases for 1.5.3 we should not give
them an extra dot as the completion. Instead if the user wants
a ".." or a "..." operator they should key the two dots out on
their own. Its the same number of keystrokes either way.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio noticed the bash completion has been taking a long time lately.
Petr Baudis tracked it down to 72e5e989b ("bash: Add space after
unique command name is completed."). Tracing the code showed
we spent significant time inside of this loop within __gitcomp,
due to the string copying overhead.
[28.146109654] _git common over
[28.164791148] gitrefs in
[28.280302268] gitrefs dir out
[28.300939737] gitcomp in
[28.308378112] gitcomp pre-case
* [28.313407453] gitcomp iter in
* [28.701270296] gitcomp iter out
[28.713370786] out normal
Since __git_refs avoids this string copying by forking and using
echo we use the same trick here when we need to finish generating
the names for the caller.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Start preparing release notes for 1.5.6.3
git-submodule - Fix bugs in adding an existing repo as a module
bash: offer only paths after '--'
Remove unnecessary pack-*.keep file after successful git-clone
make deleting a missing ref more quiet
This patch also converts the good ole' git-remote.perl to use it.
It is otherwise used in the repo.or.cz machinery and I guess other
scripts might find it useful too.
Unfortunately,
git-ls-remote --heads .
is subtly different from
git-ls-remote . refs/heads/
(since the second matches anywhere in the string, not just at the
beginning) so we have to provide interface for both.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many git commands use '--' to separate subcommands, options, and refs
from paths. However, the programmable completion for several of these
commands does not respect the '--', and offer subcommands, options, or
refs after a '--', although only paths are permitted. e.g. 'git bisect
-- <TAB>' offers subcommands, 'git log -- --<TAB>' offers options and
'git log -- git<TAB>' offers all gitgui tags.
The completion for the following commands share this wrong behaviour:
am add bisect commit diff log reset shortlog submodule gitk.
To avoid this, we check the presence of a '--' on the command line first
and let the shell do filename completion, if one is found.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mentored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is not just nice but necessary since git-frotz is no longer in
PATH.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Check the exit code of the first hg command, and abort to avoid a later
ValueError exception.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes the following warning:
hg-to-git.py:92: DeprecationWarning: raising a string exception is deprecated
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git stash save' saves local modifications to a new stash, and runs 'git
reset --hard' to revert them to a clean index and work tree. When the
'--keep-index' option is specified, after that 'git reset --hard' the
previous contents of the index is restored and the work tree is updated
to match the index. This option is useful if the user wants to commit
only parts of his local modifications, but wants to test those parts
before committing.
Also add support for the completion of the new option, and add an
example use case to the documentation.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This removes, from the documentation and the bash completion script, the
two config options that were introduced by the git-whatchanged.sh script
and lost in the C rewrite. Today, we can use aliases as an alternative.
Signed-off-by: Olivier Marin <dkr@freesurf.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I'm working with a perforce repo using git-p4. There are some config
files which I need to change locally according to my environment. I'm
using a 'local' git branch to park these changes. And I want to avoid
accidentally checking them into p4 just by doing "git p4 submit"
mindlessly without realizing which branch I'm actually on.
This patch adds a new git config, 'git-p4.allowSubmit', which is a
whitelist of branch names. "git p4 submit" will only allow submissions
from local branches on the list. Useful for preventing inadvertently
submitting from a strictly local branch.
For backward compatibility, if this config is not set at all,
submissions from all branches are allowed.
Signed-off-by: Jing Xue <jingxue@digizenstudio.com>
Acked-By: Simon Hausmann <simon@lst.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The script appp.sh can be used with the External Editor extension for
Mozilla Thunderbird in order to be able to send inline patches in an
easy way.
Signed-off-by: Lukas Sandström <lukass@etek.chalmers.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit dbe48256b4, which
caused mis-encoding of non-ASCII author/committer names when the
git-status mode is used to create commits.
Signed-off-by: Karl Hasselström <kha@treskal.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch adds an option to make hg-to-git quiet by default. Note:
it only suppresses those messages that would be printed when everything
was up-to-date.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Acked-by: Stelian Pop <stelian@popies.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the hook gets invoked with identical old and new ids there
is no change taking place. We probably should not have been
called, but instead of failing silently allow the no-op.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a user or group ACL file does not exist in the current tip
revision of the acl repository we will get an error from cat-file
when we ask for that blob as it cannot be resolved. A quick look
at the history by rev-list can tell us if there is a path there
or not.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Listing all files in a branch during branch creation is silly;
the user's file-level ACLs probably don't mean anything at this
point. We now treat the base case of 0{40} as an empty diff,
as this happens only when the user is creating the branch and
there are file level ACLs that diff against the old value of
the branch.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* db/clone-in-c:
Add test for cloning with "--reference" repo being a subset of source repo
Add a test for another combination of --reference
Test that --reference actually suppresses fetching referenced objects
clone: fall back to copying if hardlinking fails
builtin-clone.c: Need to closedir() in copy_or_link_directory()
builtin-clone: fix initial checkout
Build in clone
Provide API access to init_db()
Add a function to set a non-default work tree
Allow for having for_each_ref() list extra refs
Have a constant extern refspec for "--tags"
Add a library function to add an alternate to the alternates file
Add a lockfile function to append to a file
Mark the list of refs to fetch as const
Conflicts:
cache.h
t/t5700-clone-reference.sh
Thanks to Johannes Schindelin for various comments and improvements,
including supporting cloning full bundles.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Option is only completed when .git/MERGE_HEAD is present.
Signed-off-by: Richard Quirk <richard.quirk@gmail.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
post-receive-email: fix accidental removal of a trailing space in signature line
Escape project names before creating pathinfo URLs
Escape project name in regexp
bash: Add completion for git diff --base --ours --theirs
diff-options.txt: document the new "--dirstat" option
post-receive-email adds a signature to the end of emails in
generate_email_footer(). The signature was separated from the main email
body using the standard string "-- ". (see RFC 3676)
a6080a0 (War on whitespace, 2007-06-07) removed the trailing whitespace
from "-- ", leaving it as "--", which is not a correct signature
separator.
This patch restores the missing space, but does it in a way that will
not set off the trailing whitespace alarms.
Signed-off-by: Andy Parkins <andyparkins@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After typing 'git remote ', the subcommand options were not shown. Fix it
by adding the missing __gitcomp call.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
According to the similar patch from David Kågedal [1], "this will make
it a little less posix-dependent and more efficient." However, there
are two other areas that need to replaced, namely
git-run-command-region and git-run-hooks. This patch implements the
changes of [1] onto those Emacs Lisp functions.
If unpatched, using the git port "msysgit" on Windows will require
defadvice changes as shown at [2] (also explained at 4msysgit.git
[3]).
I have tested git-run-command-region on msysgit, because this is
always called by git-commit (via git-commit-tree <- git-do-commit <-
git-commit-file). However, I could not test git-run-hooks because it
currently does not work on the Emacs Windows port. The latter reports
the hooks files as a+rw and a-x, despite msysgit and cygwin chmod
setting on the respective files.
References:
[1] f27e558643
[2] http://groups.google.com/group/msysgit/browse_thread/thread/b852fef689817707
[3] http://repo.or.cz/w/git/mingw/4msysgit.git?a=commit;h=3c30e5e87358eba7b6d7dcd6301ae8438f0c30ea
Signed-off-by: Clifford Caoile <piyo@users.sourceforge.net>
Acked-by: David Kågedal <davidk@lysator.liu.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These are the command line option equivalents of the 'merge.log' config
variable.
The patch also updates documentation and bash completion accordingly, and
adds a test.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This option has the same effect as '--(no-)summary' (i.e. whether to
show a diffsat at the end of the merge or not), and it is consistent
with the '--stat' option of other git commands.
Documentation, tests, and bash completion are updaed accordingly, and the
old --summary option is marked as being deprected.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It disables git-gc --auto when you are running Linux and you are
not on AC.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adds a gitcvs.dbtablenameprefix config variable, the contents of which
are prepended to any database tables names used by git-cvsserver. The
same substutions as gitcvs.dbname and gitcvs.dbuser are supported, and
any non-alphabetic characters are replaced with underscores.
A typo found in contrib/completion/git-completion.bash is also fixed.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-p4s handling of Windows style EOL was broken after the removal
of the p4 submit template handling in commit f2a6059. Fix that, and
make getP4OpenedType() more robust.
Signed-off-by: Marius Storm-Olsen <marius@trolltech.com>
Signed-off-by: Simon Hausmann <simon@lst.de>
* 'git-p4' of git://repo.or.cz/git/git-p4:
git-p4: Use P4EDITOR environment variable when set
git-p4: Unset P4DIFF environment variable when using 'p4 -du diff'
git-p4: Optimize the fetching of data from perforce.
* maint:
Make man page building quiet when DOCBOOK_XSL_172 is defined
git-new-workdir: Share SVN meta data between work dirs and the repository
rev-parse: fix meaning of rev~ vs rev~0.
git-svn: don't blindly append '*' to branch/tags config
Multiple work dirs with git svn caused each work dir to have its own
stale copy of the SVN meta data in .git/svn
git svn rebase updates commits with git-svn-id: in the repository and
stores the SVN meta data information only in that work dir. Attempting to
git svn rebase in other work dirs for the same branch would fail because
the last revision fetched according to the git-svn-id is greater than the
revision in the SVN meta data for that work directory.
Signed-off-by: Bernt Hansen <bernt@norang.ca>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Perforce allows you to set the P4EDITOR environment variable to your
preferred editor for use in perforce. Since we are displaying a
perforce changelog to the user we should use it when it is defined.
Signed-off-by: Shawn Bohrer <shawn.bohrer@gmail.com>
Signed-off-by: Simon Hausmann <simon@lst.de>
A custom diffing utility can be specified for the 'p4 diff' command by
setting the P4DIFF environment variable. However when using a custom
diffing utility such as 'vimdiff' passing options like -du can cause
unexpected behavior.
Since the goal is to generate a unified diff of the changes and attach
them to the bottom of the p4 submit log we should unset P4DIFF if it
has been set in order to generate the diff properly.
Signed-off-by: Shawn Bohrer <shawn.bohrer@gmail.com>
Signed-off-by: Simon Hausmann <simon@lst.de>
Use shallow copies in loop, and join content at the end. Then do the substitution, if needed.
Signed-off-by: Marius Storm-Olsen <marius@trolltech.com>
Signed-off-by: Simon Hausmann <simon@lst.de>
