There was a bug in the codepath to upgrade generation information
in commit-graph from v1 to v2 format, which has been corrected.
source: <cover.1657667404.git.me@ttaylorr.com>
* tb/commit-graph-genv2-upgrade-fix:
commit-graph: fix corrupt upgrade from generation v1 to v2
commit-graph: introduce `repo_find_commit_pos_in_graph()`
t5318: demonstrate commit-graph generation v2 corruption
Fix for a bug that makes write-tree to fail to write out a
non-existent index as a tree, introduced in 2.37.
source: <20220722212232.833188-1-martin.agren@gmail.com>
* tk/untracked-cache-with-uall:
read-cache: make `do_read_index()` always set up `istate->repo`
"git checkout" miscounted the paths it updated, which has been
corrected.
source: <cover.1657799213.git.matheus.bernardino@usp.br>
* mt/checkout-count-fix:
checkout: fix two bugs on the final count of updated entries
checkout: show bug about failed entries being included in final report
checkout: document bug where delayed checkout counts entries twice
A corner case bug where lazily fetching objects from a promisor
remote resulted in infinite recursion has been corrected.
source: <cover.1656593279.git.hanxin.hx@bytedance.com>
* hx/lookup-commit-in-graph-fix:
t5330: remove run_with_limited_processses()
commit-graph.c: no lazy fetch in lookup_commit_in_graph()
The resolve-undo information in the index was not protected against
GC, which has been corrected.
source: <xmqq35f7kzad.fsf@gitster.g>
* jc/resolve-undo:
fsck: do not dereference NULL while checking resolve-undo data
revision: mark blobs needed for resolve-undo as reachable
The previous commit un-broke the "badFileMode" check; before then it was
literally testing nothing. And as far as I can tell, it has been so
since the very initial version of fsck.
The current severity of "badFileMode" is just "warning". But in the
--strict mode used by transfer.fsckObjects, that is elevated to an
error. This will potentially cause hassle for users, because historical
objects with bad modes will suddenly start causing pushes to many server
operators to be rejected.
At the same time, these bogus modes aren't actually a big risk. Because
we canonicalize them everywhere besides fsck, they can't cause too much
mischief in the real world. The worst thing you can do is end up with
two almost-identical trees that have different hashes but are
interpreted the same. That will generally cause things to be inefficient
rather than wrong, and is a bug somebody working on a Git implementation
would want to fix, but probably not worth inconveniencing users by
refusing to push or fetch.
So let's downgrade this to "info" by default, which is our setting for
"mention this when fscking, but don't ever reject, even under strict
mode". If somebody really wants to be paranoid, they can still adjust
the level using config.
Suggested-by: Xavier Morel <xavier.morel@masklinn.net>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We use the normal tree_desc code to iterate over trees in fsck, meaning
we only see the canonicalized modes it returns. And hence we'd never see
anything unexpected, since it will coerce literally any garbage into one
of our normal and accepted modes.
We can use the new RAW_MODES flag to see the real modes, and then use
the existing code to actually analyze them. The existing code is written
as allow-known-good, so there's not much point in testing a variety of
breakages. The one tested here should be S_IFREG but with nonsense
permissions.
Do note that the error-reporting here isn't great. We don't mention the
specific bad mode, but just that the tree has one or more broken modes.
But when you go to look at it with "git ls-tree", we'll report the
canonicalized mode! This isn't ideal, but given that this should come up
rarely, and that any number of other tree corruptions might force you
into looking at the binary bytes via "cat-file", it's not the end of the
world. And it's something we can improve on top later if we choose.
Reported-by: Xavier Morel <xavier.morel@masklinn.net>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Enable the sparse index within the `git-rm` command.
The `p2000` tests demonstrate a ~92% execution time reduction for
'git rm' using a sparse index.
Test HEAD~1 HEAD
--------------------------------------------------------------------------
2000.74: git rm ... (full-v3) 0.41(0.37+0.05) 0.43(0.36+0.07) +4.9%
2000.75: git rm ... (full-v4) 0.38(0.34+0.05) 0.39(0.35+0.05) +2.6%
2000.76: git rm ... (sparse-v3) 0.57(0.56+0.01) 0.05(0.05+0.00) -91.2%
2000.77: git rm ... (sparse-v4) 0.57(0.55+0.02) 0.03(0.03+0.00) -94.7%
----
Also, normalize a behavioral difference of `git-rm` under sparse-index.
See related discussion [1].
`git-rm` a sparse-directory entry within a sparse-index enabled repo
behaves differently from a sparse directory within a sparse-checkout
enabled repo.
For example, in a sparse-index repo, where 'folder1' is a
sparse-directory entry, `git rm -r --sparse folder1` provides this:
rm 'folder1/'
Whereas in a sparse-checkout repo *without* sparse-index, doing so
provides this:
rm 'folder1/0/0/0'
rm 'folder1/0/1'
rm 'folder1/a'
Because `git rm` a sparse-directory entry does not need to expand the
index, therefore we should accept the current behavior, which is faster
than "expand the sparse-directory entry to match the sparse-checkout
situation".
Modify a previous test so such difference is not considered as an error.
[1] https://github.com/ffyuanda/git/pull/6#discussion_r934861398
Helped-by: Victoria Dye <vdye@github.com>
Helped-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the `ensure_full_index()` method so `git-rm` does not always
expand the index when the expansion is unnecessary, i.e. when
<pathspec> does not have any possibilities to match anything outside
of sparse-checkout definition.
Expand the index when the <pathspec> needs an expanded index, i.e. the
<pathspec> contains wildcard that may need a full-index or the
<pathspec> is simply outside of sparse-checkout definition.
Notice that the test 'rm pathspec expands index when necessary' in
t1092 *is* testing this code change behavior, though it will be marked
as 'test_expect_success' only in the next patch, where we officially
mark `command_requires_full_index = 0`, so the index does not expand
unless we tell it to do so.
Notice that because we also want `ensure_full_index` to record the
stdout and stderr from Git command, a corresponding modification
is also included in this patch. The reason we want the "sparse-index-out"
and "sparse-index-err", is that we need to make sure there is no error
from Git command itself, so we can rely on the `test_region` result
and determine if the index is expanded or not.
Helped-by: Victoria Dye <vdye@github.com>
Helped-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add tests for `git-rm`, make sure it behaves as expected when
<pathspec> is both inside or outside of sparse-checkout definition.
Helped-by: Victoria Dye <vdye@github.com>
Helped-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If 'unpack_single_entry()' is unpacking a new directory tree (that is, one
not already present in the index) into a sparse index, unpack the tree as a
sparse directory rather than traversing its contents and unpacking each file
individually. This helps keep the sparse index as collapsed as possible in
cases such as 'git reset --hard' restoring a outside-of-cone directory
removed with 'git rm -r --sparse'.
Without this patch, 'unpack_single_entry()' will only unpack a directory
into the index as a sparse directory (rather than traversing into it and
unpacking its files one-by-one) if an entry with the same name already
exists in the index. This patch allows sparse directory unpacking without a
matching index entry when the following conditions are met:
1. the directory's path is outside the sparse cone, and
2. there are no children of the directory in the index
If a directory meets these requirements (as determined by
'is_new_sparse_dir()'), 'unpack_single_entry()' unpacks the sparse directory
index entry and propagates the decision back up to 'unpack_callback()' to
prevent unnecessary tree traversal into the unpacked directory.
Reported-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the 'recursive' diff flag to the local changes reporting done by 'git
checkout' in 'show_local_changes()'. Without the flag enabled, unexpanded
sparse directories will not be recursed into to report the diff of each
file's contents, resulting in the reported local changes including
"modified" sparse directories.
The same issue was found and fixed for 'git status' in 2c521b0e49 (status:
fix nested sparse directory diff in sparse index, 2022-03-01)
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some tests assumed that core.fsyncMethod=batch is supported
everywhere, which broke FreeBSD.
* js/t5351-freebsd-fix:
t5351: avoid using `test_cmp` for binary data
t5351: avoid relying on `core.fsyncMethod = batch` to be supported
Operating modes like "--batch" of "git cat-file" command learned to
take NUL-terminated input, instead of one-item-per-line.
* tb/cat-file-z:
builtin/cat-file.c: support NUL-delimited input with `-z`
t1006: extract --batch-command inputs to variables
Add missing documentation for "include" and "includeIf" features in
"git config" file format, which incidentally teaches the command
line completion to include them in its offerings.
source: <pull.1285.v2.git.1658002423864.gitgitgadget@gmail.com>
* mb/config-document-include:
config.txt: document include, includeIf
"git clone" from a repository with some ref whose HEAD is unborn
did not set the HEAD in the resulting repository correctly, which
has been corrected.
source: <YsdyLS4UFzj0j/wB@coredump.intra.peff.net>
* jk/clone-unborn-confusion:
clone: move unborn head creation to update_head()
clone: use remote branch if it matches default HEAD
clone: propagate empty remote HEAD even with other branches
clone: drop extra newline from warning message
This reverts commit 96eaffebbf (maintenance: set
log.excludeDecoration durin prefetch, 2021-01-19).
The previous change created a default decoration filter that does not
include refs/prefetch/, so this modification of the config is no longer
needed.
One issue that can happen from this point on is that users who ran the
prefetch task on previous versions of Git will still have a
log.excludeDecoration value and that will prevent the new default
decoration filter from being active. Thus, when we add the refs/bundle/
namespace as part of the bundle URI feature, those users will see
refs/bundle/ decorations.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous change introduced the --clear-decorations option for users
who do not want their decorations limited to a narrow set of ref
namespaces.
Add a config option that is equivalent to specifying --clear-decorations
by default.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous changes introduced a new default ref filter for decorations
in the 'git log' command. This can be overridden using
--decorate-refs=HEAD and --decorate-refs=refs/, but that is cumbersome
for users.
Instead, add a --clear-decorations option that resets all previous
filters to a blank filter that accepts all refs.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a user runs 'git log', they expect a certain set of helpful
decorations. This includes:
* The HEAD ref
* Branches (refs/heads/)
* Stashes (refs/stash)
* Tags (refs/tags/)
* Remote branches (refs/remotes/)
* Replace refs (refs/replace/ or $GIT_REPLACE_REF_BASE)
Each of these namespaces was selected due to existing test cases that
verify these namespaces appear in the decorations. In particular,
stashes and replace refs can have custom colors from the
color.decorate.<slot> config option.
While one test checks for a decoration from notes, it only applies to
the tip of refs/notes/commit (or its configured ref name). Notes form
their own kind of decoration instead. Modify the expected output for the
tests in t4013 that expect this note decoration. There are several
tests throughout the codebase that verify that --decorate-refs,
--decorate-refs-exclude, and log.excludeDecoration work as designed and
the tests continue to pass without intervention.
However, there are other refs that are less helpful to show as
decoration:
* Prefetch refs (refs/prefetch/)
* Rebase refs (refs/rebase-merge/ and refs/rebase-apply/)
* Bundle refs (refs/bundle/) [!]
[!] The bundle refs are part of a parallel series that bootstraps a repo
from a bundle file, storing the bundle's refs into the repo's
refs/bundle/ namespace.
In the case of prefetch refs, 96eaffebbf (maintenance: set
log.excludeDecoration durin prefetch, 2021-01-19) added logic to add
refs/prefetch/ to the log.excludeDecoration config option. Additional
feedback pointed out that having such a side-effect can be confusing and
perhaps not helpful to users. Instead, we should hide these ref
namespaces that are being used by Git for internal reasons but are not
helpful for the users to see.
The way to provide a seamless user experience without setting the config
is to modify the default decoration filters to match our expectation of
what refs the user actually wants to see.
In builtin/log.c, after parsing the --decorate-refs and
--decorate-refs-exclude options from the command-line, call
set_default_decoration_filter(). This method populates the exclusions
from log.excludeDecoration, then checks if the list of pattern
modifications are empty. If none are specified, then the default set is
restricted to the set of inclusions mentioned earlier (HEAD, branches,
etc.). A previous change introduced the ref_namespaces array, which
includes all of these currently-used namespaces. The 'decoration' value
is non-zero when that namespace is associated with a special coloring
and fits into the list of "expected" decorations as described above,
which makes the implementation of this filter very simple.
Note that the logic in ref_filter_match() in log-tree.c follows this
matching pattern:
1. If there are exclusion patterns and the ref matches one, then ignore
the decoration.
2. If there are inclusion patterns and the ref matches one, then
definitely include the decoration.
3. If there are config-based exclusions from log.excludeDecoration and
the ref matches one, then ignore the decoration.
With this logic in mind, we need to ensure that we do not populate our
new defaults if any of these filters are manually set. Specifically, if
a user runs
git -c log.excludeDecoration=HEAD log
then we expect the HEAD decoration to not appear. If we left the default
inclusions in the set, then HEAD would match that inclusion before
reaching the config-based exclusions.
A potential alternative would be to check the list of default inclusions
at the end, after the config-based exclusions. This would still create a
behavior change for some uses of --decorate-refs-exclude=<X>, and could
be overwritten somewhat with --decorate-refs=refs/ and
--decorate-refs=HEAD. However, it no longer becomes possible to include
refs outside of the defaults while also excluding some using
log.excludeDecoration.
Another alternative would be to exclude the known namespaces that are
not intended to be shown. This would reduce the visible effect of the
change for expert users who use their own custom ref namespaces. The
implementation change would be very simple to swap due to our use of
ref_namespaces:
int i;
struct string_list *exclude = decoration_filter->exclude_ref_pattern;
/*
* No command-line or config options were given, so
* populate with sensible defaults.
*/
for (i = 0; i < NAMESPACE__COUNT; i++) {
if (ref_namespaces[i].decoration)
continue;
string_list_append(exclude, ref_namespaces[i].ref);
}
The main downside of this approach is that we expect to add new hidden
namespaces in the future, and that means that Git versions will be less
stable in how they behave as those namespaces are added.
It is critical that we provide ways for expert users to disable this
behavior change via command-line options and config keys. These changes
will be implemented in a future change.
Add a test that checks that the defaults are not added when
--decorate-refs is specified. We verify this by showing that HEAD is not
included as it normally would. Also add a test that shows that the
default filter avoids the unwanted decorations from refs/prefetch,
refs/rebase-merge,
and refs/bundle.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The color.decorate.<slot> config option added the 'grafted' slot in
09c4ba410b (log-tree: allow to customize 'grafted' color, 2018-05-26)
but included no tests for this behavior. When modifying some logic
around decorations, this ref namespace was ignored and could have been
lost as a default namespace for 'git log' decorations by default.
Add two tests to t4207 that check that the replaced objects are
correctly decorated. Use "black" as the color since it is distinct from
the other colors already in the test. The first test uses regular
replace-objects while the second creates a commit graft.
Be sure to test both modes with GIT_REPLACE_REF_BASE unset and set to an
alternative base.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before adding new tests to t4207-log-decoration-colors.sh, update the
existing test to use modern test conventions. This includes:
1. Use lowercase in test names.
2. Keep all test setup inside the test_expect_success blocks. We need
to be careful about left whitespace in the broken lines of the input
file.
3. Do not use 'git' commands on the left side of a pipe.
4. Create a cmp_filtered_decorations helper to perform the 'log', 'sed',
and test_decode_color manipulations. Move the '--all' option to be an
argument so we can change that value in future tests.
5. Modify the 'sed' command to use a simpler form that is more
portable.
The next change will introduce new tests usinge these new conventions.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The normalize_glob_ref() method was introduced in 65516f586b (log:
add option to choose which refs to decorate, 2017-11-21) to help with
decoration filters such as --decorate-refs=<filter> and
--decorate-refs-exclude=<filter>. The method has not been used anywhere
else.
At the moment, it is impossible to specify HEAD as a decoration filter
since normalize_glob_ref() prepends "refs/" to the filter if it isn't
already there.
Allow adding HEAD as a decoration filter by allowing the exact string
"HEAD" to not be prepended with "refs/". Add a test in t4202-log.sh that
would previously fail since the HEAD decoration would exist in the
output.
It is sufficient to only cover "HEAD" here and not include other special
refs like REBASE_HEAD. This is because HEAD is the only ref outside of
refs/* that is added to the list of decorations. However, we may want to
special-case these other refs in normalize_glob_ref() in the future.
Leave a NEEDSWORK comment for now.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a logic error in a082345372 (hook API: fix v2.36.0 regression:
hooks should be connected to a TTY, 2022-06-07). When it started using
the "ungroup" API added in fd3aaf53f7 (run-command: add an "ungroup"
option to run_process_parallel(), 2022-06-07) it should have made the
same sort of change that fd3aaf53f7 itself made in
"t/helper/test-run-command.c".
The correct way to emit this "Couldn't start" output with "ungroup"
would be:
fprintf(stderr, _("Couldn't start hook '%s'\n"), hook_path);
But we should instead remove the emitting of this output. As the added
test shows we already emit output when we can't run the child. The
"cannot run" output here is emitted by run-command.c's
child_err_spew().
So the addition of the "Couldn't start hook" output here in
96e7225b31 (hook: add 'run' subcommand, 2021-12-22) was always
redundant. For the pre-commit hook we'll now emit exactly the same
output as we did before f443246b9f (commit: convert
{pre-commit,prepare-commit-msg} hook to hook.h, 2021-12-22) (and
likewise for others).
We could at this point add this to the pick_next_hook() callbacks in
hook.c:
assert(!out);
assert(!*pp_task_cb);
And this to notify_start_failure() and notify_hook_finished() (in the
latter case the parameter is called "pp_task_cp"):
assert(!out);
assert(!pp_task_cb);
But let's leave any such instrumentation for some eventual cleanup of
the "ungroup" API.
Reported-by: Ilya K <me@0upti.me>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Emily Shaffer <emilyshaffer@google.com>
Reviewed-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Continue the move of existing Documentation/technical/* protocol and
file-format documentation into our main documentation space. By moving
the things that discuss the protocol we can properly link from
e.g. lsrefs.unborn and protocol.version documentation to a manpage we
build by default.
So far we have been using the "gitformat-" prefix for the
documentation we've been moving over from Documentation/technical/*,
but for protocol documentation let's use "gitprotocol-*".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create a new "File formats, protocols and other developer interfaces"
section in the main "git help git" manual page and start moving the
documentation that now lives in "Documentation/technical/*.git" over
to it. This complements the newly added and adjacent "Repository,
command and file interfaces" section.
This makes the technical documentation more accessible and
discoverable. Before this we wouldn't install it by default, and had
no ability to build man page versions of them. The links to them from
our existing documentation link to the generated HTML version of these
docs.
So let's start moving those over, starting with just the
"bundle-format.txt" documentation added in 7378ec90e1 (doc: describe
Git bundle format, 2020-02-07). We'll now have a new
gitformat-bundle(5) man page. Subsequent commits will move more git
internal format documentation over.
Unfortunately the syntax of the current Documentation/technical/*.txt
is not the same (when it comes to section headings etc.) as our
Documentation/*.txt documentation, so change the relevant bits of
syntax as we're moving this over.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create a new "Repository, command and file interfaces" section in the
main "git help git" manual page. Move things that belong under this
new criteria from the generic "Guides" section.
The "Guides" section was added in f442f28a81 (git.txt: add list of
guides, 2020-08-05). It makes sense to have e.g. "giteveryday(7)" and
"gitfaq(7)" listed under "Guides".
But placing e.g. "gitignore(5)" in it is stretching the meaning of
what a "guide" is, ideally that section should list things similar to
"giteveryday(7)" and "gitcore-tutorial(7)".
An alternate name that was considered for this new section was "User
formats", for consistency with the nomenclature used for man section 5
in general. My man(1) lists it as "File formats and conventions,
e.g. /etc/passwd".
So calling this "git help --formats" or "git help --user-formats"
would make sense for e.g. gitignore(5), but would be stretching it
somewhat for githooks(5), and would seem really suspect for the likes
of gitcli(7).
Let's instead pick a name that's closer to the generic term "User
interface", which is really what this documentation discusses: General
user-interface documentation that doesn't obviously belong elsewhere.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When attempting to merge in a superproject with conflicting submodule
pointers that cannot be fast-forwarded or trivially resolved, the merge
fails and Git prints an error message that accurately describes the
failure, but does not provide steps for the user to resolve the error.
Git is left in a conflicted state, which requires the user to:
1. merge submodules or update submodules to an already existing
commit that reflects the merge
2. add submodules changes to the superproject
3. finish merging superproject
These steps are non-obvious for newer submodule users to figure out
based on the error message and neither `git submodule status` nor `git
status` provide any useful pointers.
Update error message to provide steps to resolve submodule merge
conflict. Future work could involve adding an advice flag to the
message. Although the message is long, it also has the id of the
submodule commit that needs to be merged, which could be useful
information for the user.
Additionally, 5 merge failures that resulted in an early return have
been updated to reflect the status of the merge.
1. Null merge base (null o): CONFLICT_SUBMODULE_NULL_MERGE_BASE added
as a new conflict type and will print updated error message.
2. Null merge side a (null a): BUG(). See [1] for discussion
3. Null merge side b (null b): BUG(). See [1] for discussion
4. Submodule not checked out: added NEEDSWORK bit
5. Submodule commits not present: added NEEDSWORK bit
The errors with a NEEDSWORK bit deserve a more detailed explanation of
how to resolve them. See [2] for more context.
[1] https://lore.kernel.org/git/CABPp-BE0qGwUy80dmVszkJQ+tcpfLRW0OZyErymzhZ9+HWY1mw@mail.gmail.com/
[2] https://lore.kernel.org/git/xmqqpmhjjwo9.fsf@gitster.g/
Signed-off-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
131b94a10a ("test-lib.sh: Use GLIBC_TUNABLES instead of MALLOC_CHECK_
on glibc >= 2.34", 2022-03-04) introduced a check for the version of
glibc that is in use. This check is performed as part of
setup_malloc_check() which is called at least once for each test. As
the test involves forking `getconf` and `expr` cache the result and
use that within setup_malloc_check() to avoid forking these extra
processes for each test.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git merge" finds that it cannot perform a merge, it should
restore the working tree to the state before the command was
initiated, but in some corner cases it didn't.
* en/merge-restore-to-pristine:
merge: do not exit restore_state() prematurely
merge: ensure we can actually restore pre-merge state
merge: make restore_state() restore staged state too
merge: fix save_state() to work when there are stat-dirty files
merge: do not abort early if one strategy fails to handle the merge
merge: abort if index does not match HEAD for trivial merges
merge-resolve: abort if index does not match HEAD
merge-ort-wrappers: make printed message match the one from recursive
Make our mergesort implementation type-safe.
* rs/mergesort:
mergesort: remove llist_mergesort()
packfile: use DEFINE_LIST_SORT
fetch-pack: use DEFINE_LIST_SORT
commit: use DEFINE_LIST_SORT
blame: use DEFINE_LIST_SORT
test-mergesort: use DEFINE_LIST_SORT
test-mergesort: use DEFINE_LIST_SORT_DEBUG
mergesort: add macros for typed sort of linked lists
mergesort: tighten merge loop
mergesort: unify ranks loops
"git cat-file" learned an option to use the mailmap when showing
commit and tag objects.
* sa/cat-file-mailmap:
cat-file: add mailmap support
ident: rename commit_rewrite_person() to apply_mailmap_to_header()
ident: move commit_rewrite_person() to ident.c
revision: improve commit_rewrite_person()
There was a bug in the codepath to upgrade generation information
in commit-graph from v1 to v2 format, which has been corrected.
* tb/commit-graph-genv2-upgrade-fix:
commit-graph: fix corrupt upgrade from generation v1 to v2
commit-graph: introduce `repo_find_commit_pos_in_graph()`
t5318: demonstrate commit-graph generation v2 corruption
Fix for a bug that makes write-tree to fail to write out a
non-existent index as a tree, introduced in 2.37.
* tk/untracked-cache-with-uall:
read-cache: make `do_read_index()` always set up `istate->repo`
Add a "free_removed_argv_elements" member to "struct
setup_revision_opt", and use it to fix several memory leaks.
We have various memory leaks in APIs that take and munge "const
char **argv", e.g. parse_options(). Sometimes these APIs are given the
"argv" we get to the "main" function, in which case we don't leak
memory, but other times we're giving it the "v" member of a "struct
strvec" we created.
There's several potential ways to fix those sort of leaks, we could
add a "nodup" mode to "struct strvec", which would work for the cases
where we push constant strings to it. But that wouldn't work as soon
as we used strvec_pushf(), or otherwise needed to duplicate or create
a string for that "struct strvec".
Let's instead make it the responsibility of the revisions API. If it's
going to clobber elements of argv it can also free() them, which it
will now do if instructed to do so via "free_removed_argv_elements".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak in code added in 5d7eeee2ac (git-show: grok blobs,
trees and tags, too, 2006-12-14). As we iterate over a "<revision>..."
command-line and encounter ad OBJ_COMMIT we want to use our "struct
rev_info", but with a "pending" array of one element: the one commit
we're showing in the loop.
To do this 5d7eeee2ac saved away a pointer to rev.pending.objects and
rev.pending.nr for its iteration. We'd then clobber those (and alloc)
when we needed to show an OBJ_COMMIT.
We'd therefore leak the "rev.pending" we started out with, and only
free the new "rev.pending" in the "OBJ_COMMIT" case arm as
prepare_revision_walk() would draw it down.
Let's fix this memory leak. Now when we encounter an OBJ_COMMIT we
save away the "rev.pending" before clearing it. We then add a single
commit to it, which our indirect invocation of prepare_revision_walk()
will remove. After that we restore the "rev.pending".
Our "rev.pending" will then get free'd by the release_revisions()
added in f6bfea0ad0 (revisions API users: use release_revisions() in
builtin/log.c, 2022-04-13)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a bug in 0139c58ab9 (revisions API users: add "goto cleanup" for
release_revisions(), 2022-04-13), in that commit a release_revisions()
call was added to this function, but it never did anything due to this
TODO memset() added in fe1a21d526 (fast-rebase: demonstrate
merge-ort's API via new test-tool command, 2020-10-29).
Simply removing the memset() will fix the "cmdline" which can be seen
when running t5520-pull.sh.
This sort of thing could be detected automatically with a rule similar
to the unused.cocci merged in 7fa60d2a5b6 (Merge branch
'ab/cocci-unused' into next, 2022-07-11). The following rule on top
would catch the case being fixed here:
@@
type T;
identifier I;
identifier REL1 =~ "^[a-z_]*_(release|reset|clear|free)$";
identifier REL2 =~ "^(release|clear|free)_[a-z_]*$";
@@
- memset(\( I \| &I \), 0, ...);
... when != \( I \| &I \)
(
\( REL1 \| REL2 \)( \( I \| &I \), ...);
|
\( REL1 \| REL2 \)( \( &I \| I \) );
)
... when != \( I \| &I \)
That rule should arguably use only &I, not I (as we might be passed a
pointer). The distinction would matter if anyone cared about the
side-effects of a memset() followed by release() of a pointer to a
variable passed into the function.
As such a pattern would be at best very confusing, and most likely
point to buggy code as in this case, the above rule is probably fine
as-is.
But as this rule only found one such bug in the entire codebase let's
not add it to contrib/coccinelle/unused.cocci for now, we can always
dig it up in the future if it's deemed useful.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
You can feed absolute garbage to symbolic-ref as a target like:
git symbolic-ref HEAD refs/heads/foo..bar
While this doesn't technically break the repo entirely (our "is it a git
directory" detector looks only for "refs/" at the start), we would never
resolve such a ref, as the ".." is invalid within a refname.
Let's flag these as invalid at creation time to help the caller realize
that what they're asking for is bogus.
A few notes:
- We use REFNAME_ALLOW_ONELEVEL here, which lets:
git update-ref refs/heads/foo FETCH_HEAD
continue to work. It's unclear whether anybody wants to do something
so odd, but it does work now, so this is erring on the conservative
side. There's a test to make sure we didn't accidentally break this,
but don't take that test as an endorsement that it's a good idea, or
something we might not change in the future.
- The test in t4202-log.sh checks how we handle such an invalid ref on
the reading side, so it has to be updated to touch the HEAD file
directly.
- We need to keep our HEAD-specific check for "does it start with
refs/". The ALLOW_ONELEVEL flag means we won't be enforcing that for
other refs, but HEAD is special here because of the checks in
validate_headref().
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git checkout" miscounted the paths it updated, which has been
corrected.
source: <cover.1657799213.git.matheus.bernardino@usp.br>
* mt/checkout-count-fix:
checkout: fix two bugs on the final count of updated entries
checkout: show bug about failed entries being included in final report
checkout: document bug where delayed checkout counts entries twice
"git rebase -i" learns to update branches whose tip appear in the
rebased range with "--update-refs" option.
source: <pull.1247.v5.git.1658255624.gitgitgadget@gmail.com>
* ds/rebase-update-ref:
sequencer: notify user of --update-refs activity
sequencer: ignore HEAD ref under --update-refs
rebase: add rebase.updateRefs config option
sequencer: rewrite update-refs as user edits todo list
rebase: update refs from 'update-ref' commands
rebase: add --update-refs option
sequencer: add update-ref command
sequencer: define array with enum values
rebase-interactive: update 'merge' description
branch: consider refs under 'update-refs'
t2407: test branches currently using apply backend
t2407: test bisect and rebase as black-boxes
The `test_cmp` function is meant to provide nicer output than `cmp` when
expected and actual output of Git commands disagree. The implicit
assumption is that the output is line-based and human readable.
However, aaf81223f4 (unpack-objects: use stream_loose_object() to
unpack large objects, 2022-06-11) introduced a call that compares the
contents of pack files, which are distinctly not line-based nor human
readable.
This causes problems because on Windows, we hand off to the Bash
function `mingw_test_cmp` that compares the lines while ignoring line
ending differences. And this Bash function spends an insane amount of
cycles trying to read in that binary pack file, so that it is almost
indistinguishable from an infinite loop.
For example, t5351 took 1486 seconds in the CI run at
https://github.com/git/git/runs/7398490747?check_suite_focus=true#step:5:171,
to complete. And yes, that is almost half an hour.
Since Git's tests already use `cmp` consistently when comparing pack
files, let's change this instance to use `cmp` instead of `test_cmp`,
too, and fix that performance problem.
Now t5351 takes all of 22 seconds.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On FreeBSD, this mode is not supported. But since 3a251bac0d (trace2:
only include "fsync" events if we git_fsync(), 2022-07-18) t5351 will
fail if this mode is unsupported.
Let's address this in the minimal fashion, by detecting that that mode
is unsupported and expecting a different count of hardware flushes in
that case.
This fixes the CI/PR builds on FreeBSD again.
Note: A better way would be to test only what is relevant in t5351.6
"unpack big object in stream (core.fsyncmethod=batch)" again instead of
blindly comparing the output against some exact text. But that would
pretty much revert the idea of above-mentioned commit, and that commit
was _just_ accepted into Git's main branch so one must assume that it
was intentional.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak that's been reported by some versions of "gcc" since
"output_state" became malloc'd in 55a9651d26 (upload-pack.c: increase
output buffer size, 2021-12-14).
In e75d2f7f73 (revisions API: have release_revisions() release
"filter", 2022-04-13) it was correctly marked as leak-free, the only
path through this function that doesn't reach the free(output_state)
is if we "goto fail", and that will invoke "die()".
Such leaks are not included with SANITIZE=leak (but e.g. valgrind will
still report them), but under some gcc optimization (I have not been
able to reproduce it with "clang") we'll report a leak here
anyway. E.g. gcc v12 with "-O2" and above will trigger it, but not
clang v13 with any "-On".
The GitHub CI would also run into this leak if the "linux-leaks" job
was made to run with "GIT_TEST_SANITIZE_LEAK_LOG=true".
See [1] for a past case where gcc had similar trouble analyzing leaks
involving a die() invocation in the function.
1. https://lore.kernel.org/git/patch-v3-5.6-9a44204c4c9-20211022T175227Z-avarab@gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark those remaining tests that pass when run under SANITIZE=leak with
TEST_PASSES_SANITIZE_LEAK=true, these were either omitted in
f346fcb62a (Merge branch 'ab/mark-leak-free-tests-even-more',
2021-12-15) and 5a4f8381b6 (Merge branch 'ab/mark-leak-free-tests',
2021-10-25), or have had their memory leaks fixed since then.
With this change there's now a a one-to-one mapping between those
tests that we have opted-in via "TEST_PASSES_SANITIZE_LEAK=true", and
those that pass with the new "check" mode:
GIT_TEST_PASSING_SANITIZE_LEAK=check \
GIT_TEST_SANITIZE_LEAK_LOG=true \
make test SANITIZE=leak
Note that the "GIT_TEST_SANITIZE_LEAK_LOG=true" is needed due to the
edge cases noted in a preceding commit, i.e. in some cases we'd pass
the test itself, but still have outstanding leaks due to ignored exit
codes.
The "GIT_TEST_SANITIZE_LEAK_LOG=true" corrects for that, we're only
marking those tests as passing that really don't have any leaks,
whether that was reflected in their exit code or not.
Note that the change here to "t9100-git-svn-basic.sh" is marking that
test as passing under SANITIZE=leak, we're removing a
"TEST_FAILS_SANITIZE_LEAK=true" line, not
"TEST_PASSES_SANITIZE_LEAK=true". See 7a98d9ab00 (revisions API: have
release_revisions() release "cmdline", 2022-04-13) for the
introduction of that t/lib-git-svn.sh-specific variable.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The '!SANITIZE_LEAK' prerequisite added in 956d2e4639 (tests: add a
test mode for SANITIZE=leak, run it in CI, 2021-09-23) has been used
in various tests to skip individual tests in otherwise leak-free
tests.
Let's change the cases that have become leak-free since then to run
under SANITIZE=leak.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As noted in previous on-list discussions[1] we have various tests that
will falsely report being leak-free because we're missing the relevant
exit code from LSAN as summarized below.
We should fix those issues, but in the meantime and as an additional
sanity check we can and should consider our own ASAN logs before
reporting that a test is leak-free.
Before this compiling with SANITIZE=leak and running:
./t6407-merge-binary.sh
Will exit successfully, now we'll get an error and an informative
message on:
GIT_TEST_SANITIZE_LEAK_LOG=true ./t6407-merge-binary.sh
Even better, as noted in the updated t/README we'll now error out when
combined with the "check" mode:
GIT_TEST_PASSING_SANITIZE_LEAK=check \
GIT_TEST_SANITIZE_LEAK_LOG=true \
./t4058-diff-duplicates.sh
Why do we miss these leaks? Because:
* We have leaks inside "test_expect_failure" blocks, which by design
will not distinguish a "normal" failure from an abort() or
segfault. See [1] for a discussion of it shortcomings.
* We have "git" invocations outside of "test_expect_success",
e.g. setup code in the main body of the test, or in test helper
functions that don't use &&-chaining.
* Our tests will otherwise catch segfaults and abort(), but if we
invoke a command that invokes another command it needs to ferry the
exit code up to us.
Notably a command that e.g. might invoke "git pack-objects" might
itself exit with status 128 if that "pack-objects" segfaults or
abort()'s. If the test invoking the parent command(s) is using
"test_must_fail" we'll consider it an expected "ok" failure.
* run-command.c doesn't (but probably should) ferry up such exit
codes, so for e.g. "git push" tests where we expect a failure and an
underlying "git" command fails we won't ferry up the segfault or
abort exit code.
* We have gitweb.perl and some other perl code ignoring return values
from close(), i.e. ignoring exit codes from "git rev-parse" et al.
* We have in-tree shellscripts like "git-merge-one-file.sh" invoking
git commands, they'll usually return their own exit codes on "git"
failure, rather then ferrying up segfault or abort() exit code.
E.g. these invocations in git-merge-one-file.sh leak, but aren't
reflected in the "git merge" exit code:
src1=$(git unpack-file $2)
src2=$(git unpack-file $3)
That case would be easily "fixed" by adding a line like this after
each assignment:
test $? -ne 0 && exit $?
But we'd then in e.g. "t6407-merge-binary.sh" run into
write_tree_trivial() in "builtin/merge.c" calling die() instead of
ferrying up the relevant exit code.
Let's remove "TEST_PASSES_SANITIZE_LEAK=true" from tests we
were falsely marking as leak-free.
In the case of t6407-merge-binary.sh it was marked as leak-free in
9081a421a6 (checkout: fix "branch info" memory leaks,
2021-11-16). I'd previously removed other bad
"TEST_PASSES_SANITIZE_LEAK=true" opt-ins in the series merged in
ea05fd5fbf (Merge branch 'ab/keep-git-exit-codes-in-tests',
2022-03-16). The case of t1060-object-corruption.sh is more subtle,
and will be discussed in a subsequent commit.
1. https://lore.kernel.org/git/cover-0.7-00000000000-20220318T002951Z-avarab@gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new "GIT_TEST_PASSING_SANITIZE_LEAK=check" mode to the
test-lib.sh.
As noted in the updated "t/README" this compliments the existing
"GIT_TEST_PASSING_SANITIZE_LEAK=true" mode added in
956d2e4639 (tests: add a test mode for SANITIZE=leak, run it in CI,
2021-09-23).
Rather than document this all in one (even more) dense paragraph split
up the discussion of how it combines with --immediate into its own
paragraph following the discussion of
"GIT_TEST_SANITIZE_LEAK_LOG=true".
Before the removal of "test_external" in a preceding commit we would
have had to special-case t9700-perl-git.sh and t0202-gettext-perl.sh.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the "test_external" function added in [1]. This arguably makes
the output of t9700-perl-git.sh and friends worse. But as we'll argue
below the trade-off is worth it, since "chaining" to another TAP
emitter in test-lib.sh is more trouble than it's worth.
The new output of t9700-perl-git.sh is now:
$ ./t9700-perl-git.sh
ok 1 - set up test repository
ok 2 - use t9700/test.pl to test Git.pm
# passed all 2 test(s)
1..2
Whereas before this change it would be:
$ ./t9700-perl-git.sh
ok 1 - set up test repository
# run 1: Perl API (perl /home/avar/g/git/t/t9700/test.pl)
ok 2 - use Git;
[... omitting tests 3..46 from t/t9700/test.pl ...]
ok 47 - unquote escape sequences
1..47
# test_external test Perl API was ok
# test_external_without_stderr test no stderr: Perl API was ok
At the time of its addition supporting "test_external" was easy, but
when test-lib.sh itself started to emit TAP in [2] we needed to make
everything surrounding the emission of the plan consider
"test_external". I added that support in [2] so that we could run:
prove ./t9700-perl-git.sh :: -v
But since then in [3] the door has been closed on combining
$HARNESS_ACTIVE and -v, we'll now just die:
$ prove ./t9700-perl-git.sh :: -v
Bailout called. Further testing stopped: verbose mode forbidden under TAP harness; try --verbose-log
FAILED--Further testing stopped: verbose mode forbidden under TAP harness; try --verbose-log
So the only use of this has been that *if* we had failure in one of
these tests we could e.g. in CI see which test failed based on the
test number. Now we'll need to look at the full verbose logs to get
that same information.
I think this trade-off is acceptable given the reduction in
complexity, and it brings these tests in line with other similar
tests, e.g. the reftable tests added in [4] will be condensed down to
just one test, which invokes the C helper:
$ ./t0032-reftable-unittest.sh
ok 1 - unittests
# passed all 1 test(s)
1..1
It would still be nice to have that ":: -v" form work again, it
never *really* worked, but even though we've had edge cases test
output screwing up the TAP it mostly worked between d998bd4ab6 and
[3], so we may have been overzealous in forbidding it outright.
I have local patches which I'm planning to submit sooner than later
that get us to that goal, and in a way that isn't buggy. In the
meantime getting rid of this special case makes hacking on this area
of test-lib.sh easier, as we'll do in subsequent commits.
The switch from "perl" to "$PERL_PATH" here is because "perl" is
defined as a shell function in the test suite, see a5bf824f3b (t:
prevent '-x' tracing from interfering with test helpers' stderr,
2018-02-25). On e.g. the OSX CI the "command perl"... will be part of
the emitted stderr.
1. fb32c41008 (t/test-lib.sh: add test_external and
test_external_without_stderr, 2008-06-19)
2. d998bd4ab6 (test-lib: Make the test_external_* functions
TAP-aware, 2010-06-24)
3. 614fe01521 (test-lib: bail out when "-v" used under
"prove", 2016-10-22)
4. ef8a6c6268 (reftable: utility functions, 2021-10-07)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the original "perl -MTest::More" prerequisite check was added in
[1] it's been copy/pasted in [2], [3] and [4]. As we'll be changing
these codepaths in a subsequent commit let's consolidate these.
While we're at it let's move these to a lazy prereq, and make them
conform to our usual coding style (e.g. "\nthen", not "; then").
1. e46f9c8161 (t9700: skip when Test::More is not available,
2008-06-29)
2. 5e9637c629 (i18n: add infrastructure for translating Git with
gettext, 2011-11-18)
3. 8d314d7afe (send-email: reduce dependencies impact on
parse_address_line, 2015-07-07)
4. f07eeed123 (git-credential-netrc: adapt to test framework for git,
2018-05-12)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "make test" is run with the default of "DEFAULT_TEST_TARGET=test"
we'll leave the "test-results" directory in-place, but don't do so for
the "prove" target.
The reason for this is that when 28d836c815 (test: allow running the
tests under "prove", 2010-10-14) allowed for running the tests under
"prove" there was no point in leaving the "test-results" in place.
The "prove" target provides its own summary, so we don't need to run
"aggregate-results", which is the reason we have "test-results" in the
first place. See 2d84e9fb6d (Modify test-lib.sh to output stats to
t/test-results/*, 2008-06-08).
But in a subsequent commit test-lib.sh will start emitting reports of
memory leaks in test-results/*, and it will be useful to analyze these
after the fact.
This wouldn't be a problem as failing tests will halt the removal of
the files (we'll never reach "clean-except-prove-cache" from the
"prove" target), but will be subsequently as we'll want to report a
successful run, but might still have e.g. logs of known memory leaks
in test-results/*.
So let's stop removing this, it's sufficient that "make clean" removes
it, and that "pre-clean" (which both "test" and "prove" depend on)
will remove it, i.e. we'll never have a stale "test-results" because
of this change.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the ability to run the test suite under a new
"GIT_TEST_SANITIZE_LEAK_LOG=true" mode, when true we'll log the leaks
we find an a new "test-results/<test-name>.leak" directory.
That new path is consistent with the existing
"test-results/<test-name>.<type>" results, except that those are all
files, not directories.
We also set "log_exe_name=1" to include the name of the executable in
the filename. This gives us files like "trace.git.<pid>" instead of
the default of "trace.<pid>". I.e. we'll be able to distinguish "git"
leaks from "test-tool", "git-daemon" etc.
We then set "dedup_token_length" to non-zero ("0" is the default) to
succinctly log a token we can de-duplicate these stacktraces on. The
string is simply a one-line stack-trace with only function names up to
N frames, which we limit at "9999" as a shorthand for
"infinite" (there appears to be no way to say "no limit").
With these combined we can now easily get e.g. the top 10 leaks in the
test suite grouped by full stacktrace:
grep -o -P -h '(?<=DEDUP_TOKEN: ).*' test-results/*.leak/trace.git.* | sort | uniq -c | sort -nr | head -n 10
Or add "grep -E -o '[^-]+'" to that to group by functions instead of
stack traces:
grep -o -P -h '(?<=DEDUP_TOKEN: ).*' test-results/*.leak/trace.git.* | grep -E -o '[^-]+' | sort | uniq -c | sort -nr | head -n 20
This new mode requires git to be compiled with SANITIZE=leak, rather
than explaining that in the documentation let's make it
self-documenting by bailing out if the user asks for this without git
having been compiled with SANITIZE=leak, as we do with
GIT_TEST_PASSING_SANITIZE_LEAK=true.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reword the documentation added in 956d2e4639 (tests: add a test mode
for SANITIZE=leak, run it in CI, 2021-09-23) for brevity.
The comment added in the same commit was also misleading: We skip
certain tests if SANITIZE=leak and GIT_TEST_PASSING_SANITIZE_LEAK=true,
not if we're compiled with SANITIZE=leak. Let's just remove the
comment, the control flow here is obvious enough that the code can
speak for itself.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the ability to have those tests that fail return 0, and those
tests that succeed return 1. This is useful e.g. to run "--stress"
tests on tests that fail 99% of the time on some setup, i.e. to smoke
out the flaky run which yielded success.
In a subsequent commit a new SANITIZE=leak mode will make use of this.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change various "exit 1" checks that happened after our "die" handler
had been set up to use BAIL_OUT instead. See 234383cd40 (test-lib.sh:
use "Bail out!" syntax on bad SANITIZE=leak use, 2021-10-14) for the
benefits of the BAIL_OUT function.
The previous use of "error" here was not a logic error, but the "exit"
without "GIT_EXIT_OK" would emit the "FATAL: Unexpected exit with code
$code" message on top of the error we wanted to emit.
Since we'd also like to stop "prove" in its tracks here, the right
thing to do is to emit a "Bail out!" message.
Let's also move the "GIT_EXIT_OK=t" assignments to just above the
"exit [01]" in "test_done". It's not OK if we exit in
e.g. finalize_test_output.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the control flow in test_done so that we'll set GIT_EXIT_OK=t
after we call test_atexit_handler(). This seems to have been a mistake
in 900721e15c (test-lib: introduce 'test_atexit', 2019-03-13). It
doesn't make sense to allow our "atexit" handling to call "exit"
without us emitting the errors we'll emit without GIT_EXIT_OK=t being
set.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Clarify that these two functions never take N arguments, they'll only
ever receive one. They've needlessly used $@ over $1 since
41ac414ea2 (Sane use of test_expect_failure, 2008-02-01).
In the future we might want to pass the test source to these, but now
that's not the case. This preparatory change helps to clarify a
follow-up change.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fixes for tests when the source directory has unusual characters in
its path, e.g. whitespaces, double-quotes, etc.
source: <cover-v2-0.3-00000000000-20220630T101646Z-avarab@gmail.com>
* ab/test-quoting-fix:
config tests: fix harmless but broken "rm -r" cleanup
test-lib.sh: fix prepend_var() quoting issue
tests: add missing double quotes to included library paths
In a non-bare repository, the behavior of Git when the
core.worktree configuration variable points at a directory that has
a repository as its subdirectory, regressed in Git 2.27 days.
source: <20220616234433.225-1-gg.oss@outlook.com>
source: <20220616231956.154-1-gg.oss@outlook.com>
* gg/worktree-from-the-above:
dir: minor refactoring / clean-up
dir: traverse into repository
Fixes a long-standing corner case bug around directory renames in
the merge-ort strategy.
source: <pull.1268.v4.git.1656984823.gitgitgadget@gmail.com>
* en/merge-dual-dir-renames-fix:
merge-ort: fix issue with dual rename and add/add conflict
merge-ort: shuffle the computation and cleanup of potential collisions
merge-ort: make a separate function for freeing struct collisions
merge-ort: small cleanups of check_for_directory_rename
t6423: add tests of dual directory rename plus add/add conflict
A fix for a regression in test framework.
source: <pull.1288.git.1657789234416.gitgitgadget@gmail.com>
* js/ci-github-workflow-markup:
tests: fix incorrect --write-junit-xml code
Add missing documentation for "include" and "includeIf" features in
"git config" file format, which incidentally teaches the command
line completion to include them in its offerings.
* mb/config-document-include:
config.txt: document include, includeIf
Omit fsync-related trace2 entries when their values are all zero.
* ab/squelch-empty-fsync-traces:
trace2: only include "fsync" events if we git_fsync()
Add a new option "--format" that outputs index entries
informations in a custom format, taking inspiration
from the option with the same name in the `git ls-tree`
command.
"--format" cannot used with "-s", "-o", "-k", "-t",
" --resolve-undo","--deduplicate" and "--eol".
Signed-off-by: ZheNing Hu <adlternative@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, if the user:
* Had no local changes before starting the merge
* A merge strategy makes changes to the working tree/index but returns
with exit status 2
Then we'd call restore_state() to clean up the changes and either let
the next merge strategy run (if there is one), or exit telling the user
that no merge strategy could handle the merge. Unfortunately,
restore_state() did not clean up the changes as expected; that function
was a no-op if the stash was a null, and the stash would be null if
there were no local changes before starting the merge. So, instead of
"Rewinding the tree to pristine..." as the code claimed, restore_state()
would leave garbage around in the index and working tree (possibly
including conflicts) for either the next merge strategy or for the user
after aborting the merge. And in the case of aborting the merge, the
user would be unable to run "git merge --abort" to get rid of the
unintended leftover conflicts, because the merge control files were not
written as it was presumed that we had restored to a clean state
already.
Fix the main problem by making sure that restore_state() only skips the
stash application if the stash is null rather than skipping the whole
function.
However, there is a secondary problem -- since merge.c forks
subprocesses to do the cleanup, the in-memory index is left out-of-sync.
While there was a refresh_cache(REFRESH_QUIET) call that attempted to
correct that, that function would not handle cases where the previous
merge strategy added conflicted entries. We need to drop the index and
re-read it to handle such cases.
(Alternatively, we could stop forking subprocesses and instead call some
appropriate function to do the work which would update the in-memory
index automatically. For now, just do the simple fix.)
Also, add a testcase checking this, one for which the octopus strategy
fails on the first commit it attempts to merge, and thus which it
cannot handle at all and must completely bail on (as per the "exit 2"
code path of commit 98efc8f3d8 ("octopus: allow manual resolve on the
last round.", 2006-01-13)).
Reported-by: ZheNing Hu <adlternative@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are multiple issues at play here:
1) If `git merge` is invoked with staged changes, it should abort
without doing any merging, and the user's working tree and index
should be the same as before merge was invoked.
2) Merge strategies are responsible for enforcing the index == HEAD
requirement. (See 9822175d2b ("Ensure index matches head before
invoking merge machinery, round N", 2019-08-17) for some history
around this.)
3) Merge strategies can bail saying they are not an appropriate
handler for the merge in question (possibly allowing other
strategies to be used instead).
4) Merge strategies can make changes to the index and working tree,
and have no expectation to clean up after themselves, *even* if
they bail out and say they are not an appropriate handler for
the merge in question. (The `octopus` merge strategy does this,
for example.)
5) Because of (3) and (4), builtin/merge.c stashes state before
trying merge strategies and restores it afterward.
Unfortunately, if users had staged changes before calling `git merge`,
builtin/merge.c could do the following:
* stash the changes, in order to clean up after the strategies
* try all the merge strategies in turn, each of which report they
cannot function due to the index not matching HEAD
* restore the changes via "git stash apply"
But that last step would have the net effect of unstaging the user's
changes. Fix this by adding the "--index" option to "git stash apply".
While at it, also squelch the stash apply output; we already report
"Rewinding the tree to pristine..." and don't need a detailed `git
status` report afterwards. Also while at it, switch to using strvec
so folks don't have to count the arguments to ensure we avoided an
off-by-one error, and so it's easier to add additional arguments to
the command.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When there are stat-dirty files, but no files are modified,
`git stash create` exits with unsuccessful status. This causes merge
to fail. Copy some code from sequencer.c's create_autostash to refresh
the index first to avoid this problem.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
builtin/merge is setup to allow multiple strategies to be specified,
and it will find the "best" result and use it. This is defeated if
some of the merge strategies abort early when they cannot handle the
merge. Fix the logic that calls recursive and ort to not do such an
early abort, but instead return "2" or "unhandled" so that the next
strategy can try to handle the merge.
Coming up with a testcase for this is somewhat difficult, since
recursive and ort both handle nearly any two-headed merge (there is
a separate code path that checks for non-two-headed merges and
already returns "2" for them). So use a somewhat synthetic testcase
of having the index not match HEAD before the merge starts, since all
merge strategies will abort for that.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As noted in the last commit and the links therein (especially commit
9822175d2b ("Ensure index matches head before invoking merge machinery,
round N", 2019-08-17), we have had a very long history of problems with
failing to enforce the requirement that index matches HEAD when starting
a merge.
The "trivial merge" logic in builtin/merge.c is yet another such case
we previously missed. Add a check for it to ensure it aborts if the
index does not match HEAD, and add a testcase where this fix is needed.
Note that the fix here would also incidentally be an alternative fix
for the testcase added in the last patch, but the fix in the last patch
is still needed when multiple merge strategies are in use, so tweak the
testcase from the previous commit so that it continues to exercise the
codepath added in the last commit.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As noted in commit 9822175d2b ("Ensure index matches head before
invoking merge machinery, round N", 2019-08-17), we have had a very
long history of problems with failing to enforce the requirement that
index matches HEAD when starting a merge. One of the commits
referenced in the long tale of issues arising from lax enforcement of
this requirement was commit 55f39cf755 ("merge: fix misleading
pre-merge check documentation", 2018-06-30), which tried to document
the requirement and noted there were some exceptions. As mentioned in
that commit message, the `resolve` strategy was the one strategy that
did not have an explicit index matching HEAD check, and the reason it
didn't was that I wasn't able to discover any cases where the
implementation would fail to catch the problem and abort, and didn't
want to introduce unnecessary performance overhead of adding another
check.
Well, today I discovered a testcase where the implementation does not
catch the problem and so an explicit check is needed. Add a testcase
that previously would have failed, and update git-merge-resolve.sh to
have an explicit check. Note that the code is copied from 3ec62ad9ff
("merge-octopus: abort if index does not match HEAD", 2016-04-09), so
that we reuse the same message and avoid making translators need to
translate some new message.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When callers are using `cat-file` via one of the stdin-driven `--batch`
modes, all input is newline-delimited. This presents a problem when
callers wish to ask about, e.g. tree-entries that have a newline
character present in their filename.
To support this niche scenario, introduce a new `-z` mode to the
`--batch`, `--batch-check`, and `--batch-command` suite of options that
instructs `cat-file` to treat its input as NUL-delimited, allowing the
individual commands themselves to have newlines present.
The refactoring here is slightly unfortunate, since we turn loops like:
while (strbuf_getline(&buf, stdin) != EOF)
into:
while (1) {
int ret;
if (opt->nul_terminated)
ret = strbuf_getline_nul(&input, stdin);
else
ret = strbuf_getline(&input, stdin);
if (ret == EOF)
break;
}
It's tempting to think that we could use `strbuf_getwholeline()` and
specify either `\n` or `\0` as the terminating character. But for input
on platforms that include a CR character preceeding the LF, this
wouldn't quite be the same, since `strbuf_getline(...)` will trim any
trailing CR, while `strbuf_getwholeline(&buf, stdin, '\n')` will not.
In the future, we could clean this up further by introducing a variant
of `strbuf_getwholeline()` that addresses the aforementioned gap, but
that approach felt too heavy-handed for this pair of uses.
Some tests are added in t1006 to ensure that `cat-file` produces the
same output in `--batch`, `--batch-check`, and `--batch-command` modes
with and without the new `-z` option.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A future commit will want to ensure that various `--batch`-related
options produce the same output whether their input is newline
terminated, or NUL terminated (and a to-be-implemented `-z` option
exists).
To prepare for this, extract the given input(s) into separate variables
to that their LF characters can easily be converted into NUL bytes when
testing the new `-z` mode.
This is consistent with other tests in t1006 (which these days is no
longer a shining example of our CodingGuidelines).
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If there is no index file, e.g., because the repository has just been
created, we return zero early (unless `must_exist` makes us die
instead.)
This early return means we do not set up `istate->repo`. With
`core.untrackedCache=true`, the recent e6a653554b ("untracked-cache:
support '--untracked-files=all' if configured", 2022-03-31) will
eventually pass down `istate->repo` as a null pointer to
`repo_config_get_string()`, causing a segmentation fault.
If we do hit this early return, set up `istate->repo` similar to when we
actually read the index.
Reported-by: Joey Hess <id@joeyh.name>
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mt/checkout-count-fix:
checkout: fix two bugs on the final count of updated entries
checkout: show bug about failed entries being included in final report
checkout: document bug where delayed checkout counts entries twice
Earlier, HTTP transport clients learned to tell the server side
what locale they are in by sending Accept-Language HTTP header, but
this was done only for some requests but not others.
* ll/curl-accept-language:
remote-curl: send Accept-Language header to server
"git clone" from a repository with some ref whose HEAD is unborn
did not set the HEAD in the resulting repository correctly, which
has been corrected.
* jk/clone-unborn-confusion:
clone: move unborn head creation to update_head()
clone: use remote branch if it matches default HEAD
clone: propagate empty remote HEAD even with other branches
clone: drop extra newline from warning message
A corner case bug where lazily fetching objects from a promisor
remote resulted in infinite recursion has been corrected.
* hx/lookup-commit-in-graph-fix:
t5330: remove run_with_limited_processses()
commit-graph.c: no lazy fetch in lookup_commit_in_graph()
The resolve-undo information in the index was not protected against
GC, which has been corrected.
* jc/resolve-undo:
fsck: do not dereference NULL while checking resolve-undo data
revision: mark blobs needed for resolve-undo as reachable
When the user runs 'git rebase -i --update-refs', the end message still
says only
Successfully rebased and updated <HEAD-ref>.
Update the sequencer to collect the successful (and unsuccessful) ref
updates due to the --update-refs option, so the end message now says
Successfully rebased and updated <HEAD-ref>.
Updated the following refs with --update-refs:
refs/heads/first
refs/heads/third
Failed to update the following refs with --update-refs:
refs/heads/second
To test this output, we need to be very careful to format the expected
error to drop the leading tab characters. Also, we need to be aware that
the verbose output from 'git rebase' is writing progress lines which
don't use traditional newlines but clear the line after every progress
item is complete. When opening the error file in an editor, these lines
are visible, but when looking at the diff in a terminal those lines
disappear because of the characters that delete the previous characters.
Use 'sed' to clear those progress lines and clear the tabs so we can get
an exact match on our expected output.
Reported-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous change added the --update-refs command-line option. For
users who always want this mode, create the rebase.updateRefs config
option which behaves the same way as rebase.autoSquash does with the
--autosquash option.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An interactive rebase provides opportunities for the user to edit the
todo list. The --update-refs option initializes the list with some
'update-ref <ref>' steps, but the user could add these manually.
Further, the user could add or remove these steps during pauses in the
interactive rebase.
Add a new method, todo_list_filter_update_refs(), that scans a todo_list
and compares it to the stored update-refs file. There are two actions
that can happen at this point:
1. If a '<ref>/<before>/<after>' triple in the update-refs file does not
have a matching 'update-ref <ref>' command in the todo-list _and_ the
<after> value is the null OID, then remove that triple. Here, the
user removed the 'update-ref <ref>' command before it was executed,
since if it was executed then the <after> value would store the
commit at that position.
2. If a 'update-ref <ref>' command in the todo-list does not have a
matching '<ref>/<before>/<after>' triple in the update-refs file,
then insert a new one. Store the <before> value to be the current
OID pointed at by <ref>. This is handled inside of the
init_update_ref_record() helper method.
We can test that this works by rewriting the todo-list several times in
the course of a rebase. Check that each ref is locked or unlocked for
updates after each todo-list update. We can also verify that the ref
update fails if a concurrent process updates one of the refs after the
rebase process records the "locked" ref location.
To help these tests, add a new 'set_replace_editor' helper that will
replace the todo-list with an exact file.
Reported-by: Phillip Wood <phillip.wood123@gmail.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous change introduced the 'git rebase --update-refs' option
which added 'update-ref <ref>' commands to the todo list of an
interactive rebase.
Teach Git to record the HEAD position when reaching these 'update-ref'
commands. The ref/before/after triple is stored in the
$GIT_DIR/rebase-merge/update-refs file. A previous change parsed this
file to avoid having other processes updating the refs in that file
while the rebase is in progress.
Not only do we update the file when the sequencer reaches these
'update-ref' commands, we then update the refs themselves at the end of
the rebase sequence. If the rebase is aborted before this final step,
then the refs are not updated. The 'before' value is used to ensure that
we do not accidentally obliterate a ref that was updated concurrently
(say, by an older version of Git or a third-party tool).
Now that the 'git rebase --update-refs' command is implemented to write
to the update-refs file, we can remove the fake construction of the
update-refs file from a test in t2407-worktree-heads.sh.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When working on a large feature, it can be helpful to break that feature
into multiple smaller parts that become reviewed in sequence. During
development or during review, a change to one part of the feature could
affect multiple of these parts. An interactive rebase can help adjust
the multi-part "story" of the branch.
However, if there are branches tracking the different parts of the
feature, then rebasing the entire list of commits can create commits not
reachable from those "sub branches". It can take a manual step to update
those branches.
Add a new --update-refs option to 'git rebase -i' that adds 'update-ref
<ref>' steps to the todo file whenever a commit that is being rebased is
decorated with that <ref>. At the very end, the rebase process updates
all of the listed refs to the values stored during the rebase operation.
Be sure to iterate after any squashing or fixups are placed. Update the
branch only after those squashes and fixups are complete. This allows a
--fixup commit at the tip of the feature to apply correctly to the sub
branch, even if it is fixing up the most-recent commit in that part.
This change update the documentation and builtin to accept the
--update-refs option as well as updating the todo file with the
'update-ref' commands. Tests are added to ensure that these todo
commands are added in the correct locations.
This change does _not_ include the actual behavior of tracking the
updated refs and writing the new ref values at the end of the rebase
process. That is deferred to a later change.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The branch_checked_out() helper helps commands like 'git branch' and
'git fetch' from overwriting refs that are currently checked out in
other worktrees.
A future update to 'git rebase' will introduce a new '--update-refs'
option which will update the local refs that point to commits that are
being rebased. To avoid collisions as the rebase completes, we want to
make the future data store for these refs to be considered by
branch_checked_out().
The data store is a plaintext file inside the 'rebase-merge' directory
for that worktree. The file lists refnames followed by two OIDs, each on
separate lines. The OIDs will be used to store the original values of
the refs and the to-be-written values as the rebase progresses, but can
be ignored at the moment.
Create a new sequencer_get_update_refs_state() method that parses this
file and populates a struct string_list with the ref-OID pairs. We can
then use this list to add to the current_checked_out_branches strmap
used by branch_checked_out().
To properly navigate to the rebase directory for a given worktree,
extract the static strbuf_worktree_gitdir() method to a public API
method.
We can test that this works without having Git write this file by
artificially creating one in our test script, at least until 'git rebase
--update-refs' is implemented and we can use it directly.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The tests in t2407 that verify the branch_checked_out() helper in the
case of bisects and rebases were added by 9347303db89 (branch: check for
bisects and rebases, 2022-06-08). However, that commit failed to check
for rebases that are using the 'apply' backend.
Add a test that checks the apply backend. The implementation was already
correct here, but it is good to have regression tests before modifying
the implementation further.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The tests added by d2ba271aad (branch: check for bisects and rebases,
2022-06-14) modified hidden state to verify the branch_checked_out()
helper. While this indeed checks that the method implementation is _as
designed_, it doesn't show that it is _correct_. Specifically, if 'git
bisect' or 'git rebase' change their back-end for preserving refs, then
these tests do not demonstrate that drift as a bug in
branch_checked_out().
Modify the tests in t2407 to actually rely on a paused bisect or rebase.
This requires adding the !SANITIZE_LEAK prereq for tests using those
builtins. The logic is still tested for leaks in the final test which
does set up that back-end directly for an error state that should not be
possible using Git commands.
Reported-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The word "whitelist" has cultural implications that are not inclusive.
Thankfully, it is not difficult to reword and avoid its use.
Focus on changes in the test scripts, since most of the changes are in
comments and test names. The renamed test_allow_var helper is only used
once inside the widely-used test_proto helper.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation and error messages for git-cvsserver include some
references to a "whitelist" that is not otherwise included in the
documentation. When different parts of the documentation do not use
common language, this can lead to confusion as to how things are meant
to operate.
Further, the word "whitelist" has cultural implications that make its
use non-inclusive. Thankfully, we can remove it while increasing
clarity.
Update Documentation/git-cvsserver.txt in a similar way to the previous
change to Documentation/git-daemon.txt. The optional '<directory>...'
list can specify a list of allowed directories. We refer to that list
directly inside of the documentation for the GIT_CVSSERVER_ROOT
environment variable.
While modifying this documentation, update the environment variables to
use a list format. We use the modern way of tabbing the description of
each variable in this section. We do _not_ update the description of
'<directory>...' to use tabs this way since the rest of the items in the
OPTIONS list do not use this modern formatting.
A single error message in the actual git-cvsserver.perl code refers to
the whitelist during argument parsing. Instead, refer to the directory
list that has been clarified in the documentation.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fixes a long-standing corner case bug around directory renames in
the merge-ort strategy.
* en/merge-dual-dir-renames-fix:
merge-ort: fix issue with dual rename and add/add conflict
merge-ort: shuffle the computation and cleanup of potential collisions
merge-ort: make a separate function for freeing struct collisions
merge-ort: small cleanups of check_for_directory_rename
t6423: add tests of dual directory rename plus add/add conflict
Tweak tests so that they still work when the "git init" template
did not create .git/info directory.
* ab/test-without-templates:
tests: don't assume a .git/info for .git/info/sparse-checkout
tests: don't assume a .git/info for .git/info/exclude
tests: don't assume a .git/info for .git/info/refs
tests: don't assume a .git/info for .git/info/attributes
tests: don't assume a .git/info for .git/info/grafts
tests: don't depend on template-created .git/branches
t0008: don't rely on default ".git/info/exclude"
