format-patch supports the format.headers configuration for adding
arbitrary email headers to the patches it outputs. This patch adds
support for an --add-header argument which makes the same feature
available from the command line. This is useful when the content of
custom email headers must change from branch to branch.
This patch has been sponsored by Grant Street Group
Signed-off-by: Michael Hendricks <michael@ndrix.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When writing out a loose object or a pack (index), move_temp_to_file() is
called to finalize the resulting file. These files (loose files and packs)
should all have permission mode 0444 (modulo adjust_shared_perm()).
Therefore, instead of doing chmod(foo, 0444) explicitly from each callsite
(or even forgetting to chmod() at all), do the chmod() call from within
move_temp_to_file().
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes the behaviour of octal notation to how it is defined in the
documentation, while keeping the traditional "loosen only" semantics
intact for "group" and "everybody".
Three main points of this patch are:
- For an explicit octal notation, the internal shared_repository variable
is set to a negative value, so that we can tell "group" (which is to
"OR" in 0660) and 0660 (which is to "SET" to 0660);
- git-init did not set shared_repository variable early enough to affect
the initial creation of many files, notably copied templates and the
configuration. We set it very early when a command-line option
specifies a custom value.
- Many codepaths create files inside $GIT_DIR by various ways that all
involve mkstemp(), and then call move_temp_to_file() to rename it to
its final destination. We can add adjust_shared_perm() call here; for
the traditional "loosen-only", this would be a no-op for many codepaths
because the mode is already loose enough, but with the new behaviour it
makes a difference.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using "git format-patch", "get_patch_filename" in
"log-tree.c" calls "strbuf_splice" that could die with
the following message:
"`pos + len' is too far after the end of the buffer"
if you have:
buf->len < start_len + FORMAT_PATCH_NAME_MAX
but:
buf->len + suffix_len > start_len + FORMAT_PATCH_NAME_MAX
This patch tries to get rid of that bug.
[jc: w/ simplified logic]
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
According to the documentation, it is perfectly okay to follow local
branches using the --track option. Introduce a test which checks whether
they behave the same. Currently one test fails.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Users were confused about the meaning and use of the --root option.
Notably, since 68c2ec7 (format-patch: show patch text for the root
commit, 2009-01-10), --root has nothing to do with showing the patch
text for the root commit any more.
Shorten and clarify the corresponding paragraph in the DESCRIPTION
section, document --root under OPTIONS, and add an explicit note that
root commits are formatted regardless.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows manpages viewed on a tty to render inline literal
text in a manner that is distinct from the surrounding text.
The initial implementation (pre-mailing-list) of this patch
included a conditional variant of the XSLT code in
manpage-base.xsl and use xmlto's --stringparam option to
optionally enable the functionality. It turns out that
--stringparam is broken in all versions of xmlto except for the
pre-release, SVN version. Since xmlto is a shell script the patch
to fix it is simple enough, but I instead opted to use xmlto's
"module" functionality.
Testing done with asciidoc 8.3.1 and docbook-xsl 1.74.0.
Signed-off-by: Chris Johnsen <chris_johnsen@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
No files use the variant of block-title with verse-block, but
such a case would have generated broken docbook XML (<simpara> is
not allowed inside <para>). This fixes the potential deviation from
valid docbook XML.
Testing done with asciidoc 8.3.1 and docbook-xsl 1.74.0.
Signed-off-by: Chris Johnsen <chris_johnsen@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the docbook-xsl-no-raw-roff variant match the
no-docbook-xsl-no-raw-roff variant in terms of which XML tag is
used to wrap listing block text (delimited with lines of dashes).
e920b56 (Tweak asciidoc output to work with broken docbook-xsl,
2006-03-05) says docbook-xsl 1.68 needs <literallayout>. This
<screen> usages was in the old, 1.72-only section. But since it
is now the "roff-less" section, it probably makes sense to make it
symmetric with the "roff-ful" section.
Testing done with asciidoc 8.3.1 and docbook-xsl 1.74.0.
Signed-off-by: Chris Johnsen <chris_johnsen@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "spurious .sp" code should be independent of docbook-xsl
versions.
Testing done with asciidoc 8.3.1 and docbook-xsl 1.74.0.
Signed-off-by: Chris Johnsen <chris_johnsen@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move a couple of XSL parameters that act to silence
informational/warning messages generated when running xmlto from
manpage-1.72.xsl to manpage-base.xsl.
Since unused parameters are silently ignored, there is no problem
if some version of docbook-xsl does not know about these
parameters. The only problem might be if a version of docbook-xsl
uses the parameters for alternate functionality. Since both
parameters have fairly specific names such a situation is
unlikely.
Testing done with asciidoc 8.3.1 and docbook-xsl 1.74.0.
Signed-off-by: Chris Johnsen <chris_johnsen@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It seems that the ability to use raw roff codes in asciidoc.conf
was eliminated by docbook-xsl 1.72.0 _and later_. Unlike the
1.72.0-specific XSLT problem, this behavior was not reverted in
later releases.
This patch aims to make it clear that the affected asciidoc
attribute (flag) can be reasonably used with docbook-xsl versions
other than 1.72.0.
Also, document which make variables should be set for various
versions of asciidoc and docbook-xsl.
Testing done with asciidoc 8.3.1 and docbook-xsl 1.74.0.
Signed-off-by: Chris Johnsen <chris_johnsen@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Parametrize the backslash and dot characters that are used to
generate roff control sequences in manpage-base.xsl.
Testing done with asciidoc 8.3.1 and docbook-xsl 1.74.0.
Signed-off-by: Chris Johnsen <chris_johnsen@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Each of manpage-base.xsl and manpage-normal.xsl gets a copy of
the contents of callouts.xsl and the original is removed. The
Makefile is adjusted to refer to manpage-normal.xsl instead of
callouts.xsl. manpage-base.xsl will be later made into a common
base for -normal and -1.72.
Testing done with asciidoc 8.3.1 and docbook-xsl 1.74.0.
Signed-off-by: Chris Johnsen <chris_johnsen@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most shells define the exit value of a pipeline as the exit value
of the last process. For each texi rule, run the DOCBOOK2X_TEXI
tool and the "fixup" script in their own non-pipeline commands so
that make will notice an error exit code.
Signed-off-by: Chris Johnsen <chris_johnsen@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adapts the "quiet make" implementation from the main
Makefile.
Signed-off-by: Chris Johnsen <chris_johnsen@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mg/http-auth:
http-push.c: use a faux remote to pass to http_init
Do not name "repo" struct "remote" in push_http.c
http.c: CURLOPT_NETRC_OPTIONAL is not available in ancient versions of cURL
http authentication via prompts
http_init(): Fix config file parsing
http.c: style cleanups
Conflicts:
http-push.c
* jc/attributes-checkout:
Add a test for checking whether gitattributes is honored by checkout.
Read attributes from the index that is being checked out
* fg/push-default:
builtin-push.c: Fix typo: "anythig" -> "anything"
Display warning for default git push with no push.default config
New config push.default to decide default behavior for push
Conflicts:
Documentation/config.txt
* dm/maint-docco:
Documentation: Remove spurious uses of "you" in git-bisect.txt.
Documentation: minor grammatical fix in git-check-ref-format.txt
Documentation: minor grammatical fixes in git-check-attr.txt
Documentation: minor grammatical fixes in git-cat-file.txt
Documentation: minor grammatical fixes and rewording in git-bundle.txt
Documentation: remove some uses of the passive voice in git-bisect.txt
the "--use-separate-remote" option no longer exists, having since
become the default for a clone.
Signed-off-by: Carlo Marcelo Arenas Belon <carenas@sajinet.com.pe>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When exporting a subset of commits on a branch that do not go back to a
root commit (e.g. master~2..master), we still want each exported commit to
have the same files in the exported tree as in the original tree.
Previously, when given such a range, we would omit master~2 as a parent of
master~1, but we would still diff against master~2 when selecting the list
of files to include in master~1. This would result in only files that
had changed in the given range showing up in the resulting export. In such
cases, we should diff master~1 against the root instead (i.e. use
diff_root_tree_sha1 instead of diff_tree_sha1).
There's a special case to consider here: incremental exports (i.e. exports
where the --import-marks flag is specified). If master~2 is an imported
mark, then we still want to diff master~1 against master~2 when selecting
the list of files to include.
We can handle all cases, including the special case, by just checking
whether master~2 corresponds to a known object mark when deciding what to
diff against.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These were added by accident in a42dea3.
This patch also rewords the description of how ranges of commits can be
skipped.
Signed-off-by: David J. Mellor <dmellor@whistlingcat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Avoid using simple variable names like 'i', since user commands are eval'ed
and may clash with and overwrite our values.
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The implementation of exec on Windows is just a rough approximation of the
POSIX behavior. In particular, no real process "overlay" happens (a new
process is spawned instead and the parent process waits until the child
terminates). In particular, the process ID cannot be taken by the exec'd
process. But there is one test in t7502-commit.sh that depends on this.
We have to skip it on Windows.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
The test sets up various shell scripts and uses them as commit message
editors. On Windows, we need a shebang line in order to recognize the
files as executable shell scripts. This adds it.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Previously, 'git diff --no-index --stat a b' generated patch output in
addition to the --stat output (or whatever other output format was
requested). Now only the requested output is generated, and patch
output remains the default.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some variables are not initialized in the Makefile, but appended to. If
the user has those variables in her environment, it will break the
build.
The variable names were found using these commands:
$ s='[ \t]';
$ S='[^ \t]';
$ comm -23 \
<(sed -n "s/^$s*\($S*\)$s$s*+=.*/\1/p" < Makefile |
sort | uniq) \
<(sed -n "s/^$s*\($S*\)$s$s*=.*/\1/p" < Makefile |
sort | uniq)
This fixes msysGit issue 216.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Increase the size of the die/warning buffer to avoid truncation
close_sha1_file(): make it easier to diagnose errors
avoid possible overflow in delta size filtering computation
The described issues are compiled from the tests by Michael Haggerty and me.
Because it is not apparent that these can be fixed anytime soon at least warn
unwary users not to rely on the inbuilt cvsimport to much.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Trivially-Acked-By: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Trivially-Acked-By: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Trivially-Acked-By: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already skip over loose refs under $GIT_DIR/refs if the name
ends with ".lock", so creating a branch named "foo.lock" will not
appear in the output of "git branch", "git for-each-ref", nor will
its commit be considered reachable by "git rev-list --all".
In the latter case this is especially evil, as it may cause
repository corruption when objects reachable only through such a
ref are deleted by "git prune".
It should be reasonably safe to deny use of ".lock" as a ref suffix.
In prior versions of Git such branches would be "phantom branches";
you can create it, but you can't see it in "git branch" output.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
