Some systems do not have perl installed to /usr/bin. Use the variable
from the build settiings, and call perl directly than via shebang.
Signed-off-by: Max Kirillov <max@max630.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The way .git/index and .git/sharedindex* files were initially
created gave these files different perm bits until they were
adjusted for shared repository settings. This was made consistent.
* cc/shared-index-permbits:
read-cache: make the split index obey umask settings
Recently added check for case smashing filesystems did not
correctly utilize the cached stat information, leading to false
breakage detected by our test suite, which has been corrected.
* nd/clone-case-smashing-warning:
clone: fix colliding file detection on APFS
Commit b878579ae7 (clone: report duplicate entries on case-insensitive
filesystems - 2018-08-17) adds a warning to user when cloning a repo
with case-sensitive file names on a case-insensitive file system. The
"find duplicate file" check was doing by comparing inode number (and
only fall back to fspathcmp() when inode is known to be unreliable
because fspathcmp() can't cover all case folding cases).
The inode check is very simple, and wrong. It compares between a
32-bit number (sd_ino) and potentially a 64-bit number (st_ino). When
an inode is larger than 2^32 (which seems to be the case for APFS), it
will be truncated and stored in sd_ino, but comparing with itself will
fail.
As a result, instead of showing a pair of files that have the same
name, we show just one file (marked before the beginning of the
loop). We fail to find the original one.
The fix could be just a simple type cast (*)
dup->ce_stat_data.sd_ino == (unsigned int)st->st_ino
but this is no longer a reliable test, there are 4G possible inodes
that can match sd_ino because we only match the lower 32 bits instead
of full 64 bits.
There are two options to go. Either we ignore inode and go with
fspathcmp() on Apple platform. This means we can't do accurate inode
check on HFS anymore, or even on APFS when inode numbers are still
below 2^32.
Or we just to to reduce the odds of matching a wrong file by checking
more attributes, counting mostly on st_size because st_xtime is likely
the same. This patch goes with this direction, hoping that false
positive chances are too small to be seen in practice.
While at there, enable the test on Cygwin (verified working by Ramsay
Jones)
(*) this is also already done inside match_stat_data()
Reported-by: Carlo Arenas <carenas@gmail.com>
Helped-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 3b1d9e04 (eoie: add End of Index Entry (EOIE) extension,
2018-10-10) Git defaults to writing the new EOIE section when writing
out an index file. Usually that is a good thing because it improves
threaded performance, but when a Git repository is shared with older
versions of Git, it produces a confusing warning:
$ git status
ignoring EOIE extension
HEAD detached at 371ed0defa
nothing to commit, working tree clean
Let's introduce the new index extension more gently. First we'll roll
out the new version of Git that understands it, and then once
sufficiently many users are using such a version, we can flip the
default to writing it by default.
Introduce a '[index] recordEndOfIndexEntries' configuration variable
to allow interested users to benefit from this index extension early.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the "test installed Git" mode of our test suite to work better.
* js/test-git-installed:
tests: explicitly use `git.exe` on Windows
tests: do not require Git to be built when testing an installed Git
t/lib-gettext: test installed git-sh-i18n if GIT_TEST_INSTALLED is set
tests: respect GIT_TEST_INSTALLED when initializing repositories
tests: fix GIT_TEST_INSTALLED's PATH to include t/helper/
"git format-patch --stat=<width>" can be used to specify the width
used by the diffstat (shown in the cover letter).
* nd/format-patch-cover-letter-stat-width:
format-patch: respect --stat in cover letter's diffstat
Our testing framework uses a special i18n "poisoned localization"
feature to find messages that ought to stay constant but are
incorrectly marked to be translated. This feature has been made
into a runtime option (it used to be a compile-time option).
* ab/dynamic-gettext-poison:
Makefile: ease dynamic-gettext-poison transition
i18n: make GETTEXT_POISON a runtime option
Make the split index write out its .git/sharedindex_* files with the
same permissions as .git/index. This only changes the behavior when
core.sharedRepository isn't set, i.e. the user's umask settings will
be respected.
This hasn't been the case ever since the split index was originally
implemented in c18b80a0e8 ("update-index: new options to
enable/disable split index mode", 2014-06-13). A mkstemp()-like
function has always been used to create it. First mkstemp() itself,
and then later our own mkstemp()-like in
f6ecc62dbf ("write_shared_index(): use tempfile module", 2015-08-10)
A related bug was fixed in df801f3f9f ("read-cache: use shared perms
when writing shared index", 2017-06-25). Since then the split index
has respected core.sharedRepository.
However, using that setting should not be required simply to make git
obey the user's umask setting. It's intended for the use-case of
overriding whatever that umask is set to. This fixes cases where the
user has e.g. set his umask to 022 on a shared server in anticipation
of other user's needing to run "status", "log" etc. in his repository.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git bundle" aborts due to an empty commit ranges
(i.e. resulting in an empty pack), it left a file descriptor to an
lockfile open, which resulted in leftover lockfile on Windows where
you cannot remove a file with an open file descriptor. This has
been corrected.
* jk/close-duped-fd-before-unlock-for-bundle:
bundle: dup() output descriptor closer to point-of-use
The recently merged "rebase in C" has an escape hatch to use the
scripted version when necessary, but it hasn't been documented,
which has been corrected.
* ab/rebase-in-c-escape-hatch:
tests: add a special setup where rebase.useBuiltin is off
rebase doc: document rebase.useBuiltin
The way "git rebase" parses and forwards the command line options
meant for underlying "git am" has been revamped, which fixed for
options with parameters that were not passed correctly.
* js/rebase-am-options:
rebase: validate -C<n> and --whitespace=<mode> parameters early
rebase: really just passthru the `git am` options
"git ls-remote --sort=<thing>" can feed an object that is not yet
available into the comparison machinery and segfault, which has
been corrected to check such a request upfront and reject it.
* sg/ref-filter-wo-repository:
ref-filter: don't look for objects when outside of a repository
Bugfix for the recently graduated "git rebase --rebase-merges".
* js/rebase-r-and-merge-head:
status: rebase and merge can be in progress at the same time
built-in rebase --skip/--abort: clean up stale .git/<name> files
rebase -i: include MERGE_HEAD into files to clean up
rebase -r: do not write MERGE_HEAD unless needed
rebase -r: demonstrate bug with conflicting merges
When editing a patch in a "git add -i" session, a hunk could be
made to no-op. The "git apply" program used to reject a patch with
such a no-op hunk to catch user mistakes, but it is now updated to
explicitly allow a no-op hunk in an edited patch.
* js/apply-recount-allow-noop:
apply --recount: allow "no-op hunks"
"rev-parse --exclude=<pattern> --branches=<pattern>" etc. did not
quite work, which has been corrected.
* ra/rev-parse-exclude-glob:
refs: fix some exclude patterns being ignored
refs: show --exclude failure with --branches/tags/remotes=glob
"git rebase --autostash" did not correctly re-attach the HEAD at times.
* js/rebase-autostash-detach-fix:
built-in rebase --autostash: leave the current branch alone if possible
built-in rebase: demonstrate regression with --autostash
The "--no-patch" option, which can be used to get a high-level
overview without the actual line-by-line patch difference shown, of
the "range-diff" command was earlier broken, which has been
corrected.
* ab/range-diff-no-patch:
range-diff: make diff option behavior (e.g. --stat) consistent
range-diff: fix regression in passing along diff options
range-diff doc: add a section about output stability
"git merge" and "git pull" that merges into an unborn branch used
to completely ignore "--verify-signatures", which has been
corrected.
* jk/verify-sig-merge-into-void:
pull: handle --verify-signatures for unborn branch
merge: handle --verify-signatures for unborn branch
merge: extract verify_merge_signature() helper
Various functions have been audited for "-Wunused-parameter" warnings
and bugs in them got fixed.
* jk/unused-parameter-fixes:
midx: double-check large object write loop
assert NOARG/NONEG behavior of parse-options callbacks
parse-options: drop OPT_DATE()
apply: return -1 from option callback instead of calling exit(1)
cat-file: report an error on multiple --batch options
tag: mark "--message" option with NONEG
show-branch: mark --reflog option as NONEG
format-patch: mark "--no-numbered" option with NONEG
status: mark --find-renames option with NONEG
cat-file: mark batch options with NONEG
pack-objects: mark index-version option as NONEG
ls-files: mark exclude options as NONEG
am: handle --no-patch-format option
apply: mark include/exclude options as NONEG
Add a few tests for a topic already in 'master'.
* mg/gpg-fingerprint-test:
t/t7510-signed-commit.sh: add signing subkey to Eris Discordia key
t/t7510-signed-commit.sh: Add %GP to custom format checks
The revision walker machinery learned to take advantage of the
commit generation numbers stored in the commit-graph file.
* ds/reachable-topo-order:
t6012: make rev-list tests more interesting
revision.c: generation-based topo-order algorithm
commit/revisions: bookkeeping before refactoring
revision.c: begin refactoring --topo-order logic
test-reach: add rev-list tests
test-reach: add run_three_modes method
prio-queue: add 'peek' operation
When writing a bundle to a file, the bundle code actually creates
"your.bundle.lock" using our lockfile interface. We feed that output
descriptor to a child git-pack-objects via run-command, which has the
quirk that it closes the output descriptor in the parent.
To avoid confusing the lockfile code (which still thinks the descriptor
is valid), we dup() it, and operate on the duplicate.
However, this has a confusing side effect: after the dup() but before we
call pack-objects, we have _two_ descriptors open to the lockfile. If we
call die() during that time, the lockfile code will try to clean up the
partially-written file. It knows to close() the file before unlinking,
since on some platforms (i.e., Windows) the open file would block the
deletion. But it doesn't know about the duplicate descriptor. On
Windows, triggering an error at the right part of the code will result
in the cleanup failing and the lockfile being left in the filesystem.
We can solve this by moving the dup() much closer to start_command(),
shrinking the window in which we have the second descriptor open. It's
easy to place this in such a way that no die() is possible. We could
still die due to a signal in the exact wrong moment, but we already
tolerate races there (e.g., a signal could come before we manage to put
the file on the cleanup list in the first place).
As a bonus, this shields create_bundle() itself from the duplicate-fd
trick, and we can simplify its error handling (note that the lock
rollback now happens unconditionally, but that's OK; it's a noop if we
didn't open the lock in the first place).
The included test uses an empty bundle to cause a failure at the right
spot in the code, because that's easy to trigger (the other likely
errors are write() problems like ENOSPC). Note that it would already
pass on non-Windows systems (because they are happy to unlink an
already-open file).
Based-on-a-patch-by: Gaël Lhez <gael.lhez@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Tested-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a GIT_TEST_REBASE_USE_BUILTIN=false test mode which is equivalent
to running with rebase.useBuiltin=false. This is needed to spot that
we're not introducing any regressions in the legacy rebase version
while we're carrying both it and the new builtin version.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Windows, when we refer to `/an/absolute/path/to/git`, it magically
resolves `git.exe` at that location. Except if something of the name
`git` exists next to that `git.exe`. So if we call `$BUILD_DIR/git`, it
will find `$BUILD_DIR/git.exe` *only* if there is not, say, a directory
called `$BUILD_DIR/git`.
Such a directory, however, exists in Git for Windows when building with
Visual Studio (our Visual Studio project generator defaults to putting
the build files into a directory whose name is the base name of the
corresponding `.exe`).
In the bin-wrappers/* scripts, we already take pains to use `git.exe`
rather than `git`, as this could pick up the wrong thing on Windows
(i.e. if there exists a `git` file or directory in the build directory).
Now we do the same in the tests' start-up code.
This also helps when testing an installed Git, as there might be even
more likely some stray file or directory in the way.
Note: the only way we can record whether the `.exe` suffix is by writing
it to the `GIT-BUILD-OPTIONS` file and sourcing it at the beginning of
`t/test-lib.sh`. This is not a requirement introduced by this patch, but
we move the call to be able to use the `$X` variable that holds the file
extension, if any.
Note also: the many, many calls to `git this` and `git that` are
unaffected, as the regular PATH search will find the `.exe` files on
Windows (and not be confused by a directory of the name `git` that is
in one of the directories listed in the `PATH` variable), while
`/path/to/git` would not, per se, know that it is looking for an
executable and happily prefer such a directory.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We really only need the test helpers to be built in the worktree in that
case, but that is not what we test for.
On the other hand it is a perfect opportunity to verify that
`GIT_TEST_INSTALLED` points to a working Git.
So let's test the appropriate Git executable. While at it, also adjust
the error message in the `GIT_TEST_INSTALLED` case.
This patch is best viewed with `-w --patience`.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command 'git ls-remote --sort=authordate <remote>' segfaults when
run outside of a repository, ever since the introduction of its
'--sort' option in 1fb20dfd8e (ls-remote: create '--sort' option,
2018-04-09).
While in general the 'git ls-remote' command can be run outside of a
repository just fine, its '--sort=<key>' option with certain keys does
require access to the referenced objects. This sorting is implemented
using the generic ref-filter sorting facility, which already handles
missing objects gracefully with the appropriate 'missing object
deadbeef for HEAD' message. However, being generic means that it
checks replace refs while trying to retrieve an object, and while
doing so it accesses the 'git_replace_ref_base' variable, which has
not been initialized and is still a NULL pointer when outside of a
repository, thus causing the segfault.
Make ref-filter more careful upfront while parsing the format string,
and make it error out when encountering a format atom requiring object
access when we are not in a repository. Also add a test to ensure
that 'git ls-remote --sort' fails gracefully when executed outside of
a repository.
Reported-by: H.Merijn Brand <h.m.brand@xs4all.nl>
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is a good idea to error out early upon seeing, say, `-Cbad`, rather
than starting the rebase only to have the `--am` backend complain later.
Let's do this.
The only options accepting parameters which we pass through to `git am`
(which may, or may not, forward them to `git apply`) are `-C` and
`--whitespace`. The other options we pass through do not accept
parameters, so we do not have to validate them here.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the behavior when diff options (e.g. "--stat") are passed
consistent with how "diff" behaves.
Before 73a834e9e2 ("range-diff: relieve callers of low-level
configuration burden", 2018-07-22) running range-diff with "--stat"
would produce stat output and the diff output, as opposed to how
"diff" behaves where once "--stat" is specified "--patch" also needs
to be provided to emit the patch output.
As noted in a previous change ("range-diff doc: add a section about
output stability", 2018-11-07) the "--stat" output with "range-diff"
is useless at the moment.
But we should behave consistently with "diff" in anticipation of such
output being useful in the future, because it would make for confusing
UI if "diff" and "range-diff" behaved differently when it came to how
they interpret diff options.
The new behavior is also consistent with the existing documentation
added in ba931edd28 ("range-diff: populate the man page",
2018-08-13). See "[...]also accepts the regular diff options[...]" in
git-range-diff(1).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It makes very, very little sense to test the built git-sh-i18n when the
user asked specifically to test another one.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It really makes very, very little sense to use a different git
executable than the one the caller indicated via setting the environment
variable GIT_TEST_INSTALLED.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We really need to be able to find the test helpers... Really. This
change was forgotten when we moved the test helpers into t/helper/
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pathspec matching against a tree object were buggy when negative
pathspec elements were involved, which has been fixed.
* nd/tree-walk-path-exclusion:
tree-walk.c: fix overoptimistic inclusion in :(exclude) matching
Assorted fixes for bugs found while auditing -Wunused-parameter
warnings.
* jk/misc-unused-fixes:
approxidate: fix NULL dereference in date_time()
pathspec: handle non-terminated strings with :(attr)
approxidate: handle pending number for "specials"
rev-list: handle flags for --indexed-objects
The code to traverse objects for reachability, used to decide what
objects are unreferenced and expendable, have been taught to also
consider per-worktree refs of other worktrees as starting points to
prevent data loss.
* nd/per-worktree-ref-iteration:
git-worktree.txt: correct linkgit command name
reflog expire: cover reflog from all worktrees
fsck: check HEAD and reflog from other worktrees
fsck: move fsck_head_link() to get_default_heads() to avoid some globals
revision.c: better error reporting on ref from different worktrees
revision.c: correct a parameter name
refs: new ref types to make per-worktree refs visible to all worktrees
Add a place for (not) sharing stuff between worktrees
refs.c: indent with tabs, not spaces
"git send-email --transfer-encoding=..." in recent versions of Git
sometimes produced an empty "Content-Transfer-Encoding:" header,
which has been corrected.
* al/send-email-auto-cte-fixup:
send-email: avoid empty transfer encoding header
The history traversal used to implement the tag-following has been
optimized by introducing a new helper.
* ds/add-missing-tags:
remote: make add_missing_tags() linear
test-reach: test get_reachable_subset
commit-reach: implement get_reachable_subset
In preparation to the day when we can deprecate and remove the
"rebase -p", make sure we can skip and later remove tests for
it.
* js/rebase-p-tests:
tests: optionally skip `git rebase -p` tests
t3418: decouple test cases from a previous `rebase -p` test case
t3404: decouple some test cases from outcomes of previous test cases
"git rev-parse --exclude=* --branches --branches" (i.e. first
saying "add only things that do not match '*' out of all branches"
and then adding all branches, without any exclusion this time")
worked as expected, but "--exclude=* --all --all" did not work the
same way, which has been fixed.
* ag/rev-parse-all-exclude-fix:
rev-parse: clear --exclude list after 'git rev-parse --all'
"git fetch" was a bit loose in parsing resposes from the other side
when talking over the protocol v2.
* jt/tighten-fetch-proto-v2-response:
fetch-pack: be more precise in parsing v2 response
The submodule support has been updated to read from the blob at
HEAD:.gitmodules when the .gitmodules file is missing from the
working tree.
* ao/submodule-wo-gitmodules-checked-out:
t/helper: add test-submodule-nested-repo-config
submodule: support reading .gitmodules when it's not in the working tree
submodule: add a helper to check if it is safe to write to .gitmodules
t7506: clean up .gitmodules properly before setting up new scenario
submodule: use the 'submodule--helper config' command
submodule--helper: add a new 'config' subcommand
t7411: be nicer to future tests and really clean things up
t7411: merge tests 5 and 6
submodule: factor out a config_set_in_gitmodules_file_gently function
submodule: add a print_config_from_gitmodules() helper
A couple of tests used to leave the repository in a state that is
deliberately corrupt, which have been corrected.
* ab/pack-tests-cleanup:
index-pack tests: don't leave test repo dirty at end
pack-objects tests: don't leave test .git corrupt at end
pack-objects test: modernize style
Tests for the recently introduced multi-pack index machinery.
* ds/test-multi-pack-index:
packfile: close multi-pack-index in close_all_packs
multi-pack-index: define GIT_TEST_MULTI_PACK_INDEX
midx: close multi-pack-index on repack
midx: fix broken free() in close_midx()
A pattern with '**' that does not have a slash on either side used
to be an invalid one, but the code now treats such double-asterisks
the same way as two normal asterisks that happen to be adjacent to
each other.
* nd/wildmatch-double-asterisk:
wildmatch: change behavior of "foo**bar" in WM_PATHNAME mode
A fourth class of configuration files (in addition to the
traditional "system wide", "per user in the $HOME directory" and
"per repository in the $GIT_DIR/config") has been introduced so
that different worktrees that share the same repository (hence the
same $GIT_DIR/config file) can use different customization.
* nd/per-worktree-config:
worktree: add per-worktree config files
t1300: extract and use test_cmp_config()
"git ls-remote $there foo" was broken by recent update for the
protocol v2 and stopped showing refs that match 'foo' that are not
refs/{heads,tags}/foo, which has been fixed.
* jk/proto-v2-ref-prefix-fix:
ls-remote: pass heads/tags prefixes to transport
ls-remote: do not send ref prefixes for patterns
