merge-recursive has some simple code to support subtree shifting; copy
it over to merge-ort. This fixes t6409.12 under
GIT_TEST_MERGE_ALGORITHM=ort.
Signed-off-by: Elijah Newren <newren@gmail.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we have a modify/delete conflict, but the only change to the
modification is e.g. change of line endings, then if renormalization is
requested then we should be able to recognize such a case as a
not-modified/delete and resolve the conflict automatically.
This fixes t6418.10 under GIT_TEST_MERGE_ALGORITHM=ort.
Signed-off-by: Elijah Newren <newren@gmail.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
ll_merge() needs an index when renormalization is requested. Create one
specifically for just this purpose with just the one needed entry. This
fixes t6418.4 and t6418.5 under GIT_TEST_MERGE_ALGORITHM=ort.
NOTE 1: Even if the user has a working copy or a real index (which is
not a given as merge-ort can be used in bare repositories), we
explicitly ignore any .gitattributes file from either of these
locations. merge-ort can be used to merge two branches that are
unrelated to HEAD, so .gitattributes from the working copy and current
index should not be considered relevant.
NOTE 2: Since we are in the middle of merging, there is a risk that
.gitattributes itself is conflicted...leaving us with an ill-defined
situation about how to perform the rest of the merge. It could be that
the .gitattributes file does not even exist on one of the sides of the
merge, or that it has been modified on both sides. If it's been
modified on both sides, it's possible that it could itself be merged
cleanly, though it's also possible that it only merges cleanly if you
use the right version of the .gitattributes file to drive the merge. It
gets kind of complicated. The only test we ever had that attempted to
test behavior in this area was seemingly unaware of the undefined
behavior, but knew the test wouldn't work for lack of attribute handling
support, marked it as test_expect_failure from the beginning, but
managed to fail for several reasons unrelated to attribute handling.
See commit 6f6e7cfb52 ("t6038: remove problematic test", 2020-08-03) for
details. So there are probably various ways to improve what
initialize_attr_index() picks in the case of a conflicted .gitattributes
but for now I just implemented something simple -- look for whatever
.gitattributes file we can find in any of the higher order stages and
use it.
Signed-off-by: Elijah Newren <newren@gmail.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
renormalize_buffer() requires an index_state, which is something that
merge-ort does not operate with. However, all the renormalization code
needs is an index with a .gitattributes file...plus a little bit of
setup. Create such an index, along with the deallocation and
attr_direction handling.
A subsequent commit will add a function to finish the initialization
of this index.
Signed-off-by: Elijah Newren <newren@gmail.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
rename/rename conflict handling depends on the fact that if both sides
renamed the same path, that the one on the MERGE_SIDE1 will appear first
in the combined diff_queue_struct passed to process_renames(). Since we
add all pairs from MERGE_SIDE1 to combined first, and then all pairs
from MERGE_SIDE2, and then sort based on filename, this will only be
true if the sort used is stable. This was found due to the fact that
Mac, unlike Linux, apparently has a system-defined qsort that is not
stable.
While we are at it, review the other callers of QSORT and add comments
about why they can remain as calls to QSORT instead of being modified
to call STABLE_QSORT.
Signed-off-by: Elijah Newren <newren@gmail.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a corner case bug in "git mv" on case insensitive systems,
which was introduced in 2.29 timeframe.
* tb/git-mv-icase-fix:
git mv foo FOO ; git mv foo bar gave an assert
CALLOC_ARRAY() macro replaces many uses of xcalloc().
* rs/calloc-array:
cocci: allow xcalloc(1, size)
use CALLOC_ARRAY
git-compat-util.h: drop trailing semicolon from macro definition
Fix macros that can silently inject unintended null-statements.
* rs/avoid-null-statement-after-macro-call:
mem-pool: drop trailing semicolon from macro definition
block-sha1: drop trailing semicolon from macro definition
The data structure used by fsmonitor interface was not properly
duplicated during an in-core merge, leading to use-after-free etc.
* js/fsmonitor-unpack-fix:
fsmonitor: do not forget to release the token in `discard_index()`
fsmonitor: fix memory corruption in some corner cases
"git bisect" reimplemented more in C during 2.30 timeframe did not
take an annotated tag as a good/bad endpoint well. This regression
has been corrected.
* jk/bisect-peel-tag-fix:
bisect: peel annotated tags to commits
The fsmonitor interface read from its input without making sure
there is something to read from. This bug is new in 2.31
timeframe.
* jh/fsmonitor-prework:
fsmonitor: avoid global-buffer-overflow READ when checking trivial response
When 'git pack-objects --stdin-packs' encounters a commit in a pack, it
marks it as a starting point of a best-effort reachability traversal
that is used to populate the name-hash of the objects listed in the
given packs.
The traversal expects that it should be able to walk the ancestors of
all commits in a pack without issue. Ordinarily this is the case, but it
is possible to having missing parents from an unreachable part of the
repository. In that case, we'd consider any missing objects in the
unreachable portion of the graph to be junk.
This should be handled gracefully: since the traversal is best-effort
(i.e., we don't strictly need to fill in all of the name-hash fields),
we should simply ignore any missing links.
This patch does that (by setting the 'ignore_missing_links' bit on the
rev_info struct), and ensures we don't regress in the future by adding a
test which demonstrates this case.
It is a little over-eager, since it will also ignore missing links in
reachable parts of the packs (which would indicate a corrupted
repository), but '--stdin-packs' is explicitly *not* about reachability.
So this step isn't making anything worse for a repository which contains
packs missing reachable objects (since we never drop objects with
'--stdin-packs').
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Note on using Asciidoctor to build documentation suite.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As noted a few commits ago ("diffcore-rename: only compute
dir_rename_count for relevant directories"), when a source file rename
is used as part of directory rename detection, we need to increment
counts for each ancestor directory in dirs_removed with value
RELEVANT_FOR_SELF. However, a few commits ago ("diffcore-rename: check
if we have enough renames for directories early on"), we may have
downgraded all relevant ancestor directories from RELEVANT_FOR_SELF to
RELEVANT_FOR_ANCESTOR.
For a given file, if no ancestor directory is found in dirs_removed with
a value of RELEVANT_FOR_SELF, then we can downgrade
relevant_source[PATH] from RELEVANT_LOCATION to RELEVANT_NO_MORE. This
means we can skip detecting a rename for that particular path (and any
other paths in the same directory).
For the testcases mentioned in commit 557ac0350d ("merge-ort: begin
performance work; instrument with trace2_region_* calls", 2020-10-28),
this change improves the performance as follows:
Before After
no-renames: 5.680 s ± 0.096 s 5.665 s ± 0.129 s
mega-renames: 13.812 s ± 0.162 s 11.435 s ± 0.158 s
just-one-mega: 506.0 ms ± 3.9 ms 494.2 ms ± 6.1 ms
While this improvement looks rather modest for these testcases (because
all the previous optimizations were sufficient to nearly remove all time
spent in rename detection already), consider this alternative testcase
tweaked from the ones in commit 557ac0350d as follows
<Same initial setup as commit 557ac0350d, then...>
$ git switch -c add-empty-file v5.5
$ >drivers/gpu/drm/i915/new-empty-file
$ git add drivers/gpu/drm/i915/new-empty-file
$ git commit -m "new file"
$ git switch 5.4-rename
$ git cherry-pick --strategy=ort add-empty-file
For this testcase, we see the following improvement:
Before After
pick-empty: 1.936 s ± 0.024 s 688.1 ms ± 4.2 ms
So roughly a factor of 3 speedup. At $DAYJOB, there was a particular
repository and cherry-pick that inspired this optimization; for that
case I saw a speedup factor of 7 with this optimization.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are two different reasons we might want a rename for a file -- for
three-way content merging or as part of directory rename detection.
Record the reason. diffcore-rename will potentially be able to filter
some of the ones marked as needed only for directory rename detection,
if it can determine those directory renames based solely on renames
found via exact rename detection and basename-guided rename detection.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous commit can only be effective if we have a computation of
the number of paths under a given directory which are still have pending
renames, and expected this number to be recorded in the dir_rename_count
map under the key UNKNOWN_DIR. Add the code necessary to compute these
values.
Note that this change means dir_rename_count might have a directory
whose only entry (for UNKNOWN_DIR) was removed by the time merge-ort
goes to check it. To account for this, merge-ort needs to check for the
case where the max count is 0.
With this change we are now computing the necessary value for each
directory in dirs_removed, but are not using that value anywhere. The
next two commits will make use of the values stored in dirs_removed in
order to compute whether each relevant_source (that is needed only for
directory rename detection) has become unnecessary.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As noted in the past few commits, if we can determine that a directory
already has enough renames to determine how directory rename detection
will be decided for that directory, then we can mark that directory as
no longer needing any more renames detected for files underneath it.
For such directories, we change the value in the dirs_removed map from
RELEVANT_TO_SELF to RELEVANT_FOR_ANCESTOR.
A subsequent patch will use this information while iterating over the
remaining potential rename sources to mark ones that were only
location_relevant as unneeded if no containing directory is still marked
as RELEVANT_TO_SELF.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When one side adds files to a directory that the other side renamed,
directory rename detection is used to either move the new paths to the
newer directory or warn the user about the fact that another path
location might be better.
If a parent of the given directory had new files added to it, any
renames in the current directory are also part of determining where the
parent directory is renamed to. Thus, naively, we need to record each
rename N times for a path at depth N. However, we can use the
additional information added to dirs_removed in the last commit to avoid
traversing all N parent directories in many cases. Let's use an example
to explain how this works. If we have a path named
src/old_dir/a/b/file.c
and src/old_dir doesn't exist on one side of history, but the other
added a file named src/old_dir/newfile.c, then if one side renamed
src/old_dir/a/b/file.c => source/new_dir/a/b/file.c
then this file would affect potential directory rename detection counts
for
src/old_dir/a/b => source/new_dir/a/b
src/old_dir/a => source/new_dir/a
src/old_dir => source/new_dir
src => source
adding a weight of 1 to each in dir_rename_counts. However, if src/
exists on both sides of history, then we don't need to track any entries
for it in dir_rename_counts. That was implemented previously. What we
are adding now, is that if no new files were added to src/old_dir/a or
src/old_dir/b, then we don't need to have counts in dir_rename_count
for those directories either.
In short, we only need to track counts in dir_rename_count for
directories whose dirs_removed value is RELEVANT_FOR_SELF. And as soon
as we reach a directory that isn't in dirs_removed (signalled by
returning the default value of NOT_RELEVANT from strintmap_get()), we
can stop looking any further up the directory hierarchy.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When one side of history renames a directory, and the other side of
history added files to the old directory, directory rename detection is
used to warn about the location of the added files so the user can
move them to the old directory or keep them with the new one.
This sets up three different types of directories:
* directories that had new files added to them
* directories underneath a directory that had new files added to them
* directories where no new files were added to it or any leading path
Save this information in dirs_removed; the next several commits will
make use of this information.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As noted in the previous commit, we want to be able to take advantage of
the "majority rules" portion of directory rename detection to avoid
detecting more renames than necessary. However, for diffcore-rename to
take advantage of that, it needs to know whether a rename source file
was needed for just directory rename detection reasons, or if it is
wanted for potential three-way content merging. Modify relevant_sources
from a strset to a strintmap, so we can encode additional information.
We also modify dirs_removed from a strset to a strintmap at the same
time because trying to determine what files are needed for directory
rename detection will require us tracking a bit more information for
each directory.
This commit only changes the types of the two variables from strset to
strintmap; it does not actually store any special values yet and for now
only checks for presence of entries in the strintmap. Thus, the code is
functionally identical to how it behaved before. Future commits will
start associating values with each key for these two maps.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In directory rename detection (when a directory is removed on one side
of history and the other side adds new files to that directory), we work
to find where the greatest number of files within that directory were
renamed to so that the new files can be moved with the majority of the
files.
Naively, we can just do this by detecting renames for *all* files within
the removed/renamed directory, looking at all the destination
directories where files within that directory were moved, and if there
is more than one such directory then taking the one with the greatest
number of files as the directory where the old directory was renamed to.
However, sometimes there are enough renames from exact rename detection
or basename-guided rename detection that we have enough information to
determine the majority winner already. Add a function meant to compute
whether particular renames are still needed based on this majority rules
check. The next several commits will then add the necessary
infrastructure to get the information we need to compute which
additional rename sources we can skip.
An important side note for future further optimization:
There is a possible improvement to this optimization that I have not yet
attempted and will not be included in this series of patches: we could
first check whether exact renames provide enough information for us to
determine directory renames, and avoid doing basename-guided rename
detection on some or all of the RELEVANT_LOCATION files within those
directories. In effect, this variant would mean doing the
handle_early_known_dir_renames() both after exact rename detection and
again after basename-guided rename detection, though it would also mean
decrementing the number of "unknown" renames for each rename we found
from basename-guided rename detection. Adding this additional check for
skippable renames right after exact rename detection might turn out to
be valuable, especially for partial clones where it might allow us to
download certain source files entirely. However, this particular
optimization was actually the last one I did in original implementation
order, and by the time I implemented this idea, every testcase I had was
sufficiently fast that further optimization was unwarranted. If future
testcases arise that tax rename detection more heavily (or perhaps
partial clones can benefit from avoiding loading more objects), it may
be worth implementing this more involved variant.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some tests in t5300 and t7810 expect us to complain about a "--threads"
argument when Git is compiled without pthread support. Running these
under GIT_TEST_FAIL_PREREQS produces a confusing failure: we pretend to
the tests that there is no pthread support, so they expect the warning,
but of course the actual build is perfectly happy to respect the
--threads argument.
We never noticed before the recent a926c4b904 (tests: remove most uses
of C_LOCALE_OUTPUT, 2021-02-11), because the tests also were marked as
requiring the C_LOCALE_OUTPUT prerequisite. Which means they'd never
have run in FAIL_PREREQS mode, since it would always pretend that the
locale prereq was not satisfied.
These tests can't possibly work in this mode; it is a mismatch between
what the tests expect and what the build was told to do. So let's just
mark them to be skipped, using the special prereq introduced by
dfe1a17df9 (tests: add a special setup where prerequisites fail,
2019-05-13).
Reported-by: Son Luong Ngoc <sluongng@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create `enum conv_attrs_classification` to express the different ways
that attributes are handled for a blob during checkout.
This will be used in a later commit when deciding whether to add a file
to the parallel or delayed queue during checkout. For now, we can also
use it in get_stream_filter_ca() to simplify the function (as the
classifying logic is the same).
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Like the previous patch, we will also need to call get_stream_filter()
with a precomputed `struct conv_attrs`, when we add support for parallel
checkout workers. So add the _ca() variant which takes the conversion
attributes struct as a parameter.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Separate the attribute gathering from the actual conversion by adding
_ca() variants of the conversion functions. These variants receive a
precomputed 'struct conv_attrs', not relying, thus, on an index state.
They will be used in a future patch adding parallel checkout support,
for two reasons:
- We will already load the conversion attributes in checkout_entry(),
before conversion, to decide whether a path is eligible for parallel
checkout. Therefore, it would be wasteful to load them again later,
for the actual conversion.
- The parallel workers will be responsible for reading, converting and
writing blobs to the working tree. They won't have access to the main
process' index state, so they cannot load the attributes. Instead,
they will receive the preloaded ones and call the _ca() variant of
the conversion functions. Furthermore, the attributes machinery is
optimized to handle paths in sequential order, so it's better to leave
it for the main process, anyway.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move convert_attrs() declaration from convert.c to convert.h, together
with the conv_attrs struct and the crlf_action enum. This function and
the data structures will be used outside convert.c in the upcoming
parallel checkout implementation. Note that crlf_action is renamed to
convert_crlf_action, which is more appropriate for the global namespace.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Validate that fsmonitor is valid to futureproof against bugs where
check_removed might be called from places that haven't refreshed.
Signed-off-by: Nipunn Koorapati <nipunn@dropbox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach git to honor fsmonitor rather than issuing an lstat
when checking for dirty local deletes. Eliminates O(files)
lstats during `git diff HEAD`
Signed-off-by: Nipunn Koorapati <nipunn@dropbox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
At 1d718a5108 ("do not overwrite untracked symlinks", 2011-02-20),
symlink.c:check_leading_path() started returning different codes for
FL_ENOENT and FL_SYMLINK. But one of its callers, unlink_entry(), was
not adjusted for this change, so it started to follow symlinks on the
leading path of to-be-removed entries. Fix that and add a regression
test.
Note that since 1d718a5108 check_leading_path() no longer differentiates
the case where it found a symlink in the path's leading components from
the cases where it found a regular file or failed to lstat() the
component. So, a side effect of this current patch is that
unlink_entry() now returns early in all of these three cases. And
because we no longer try to unlink such paths, we also don't get the
warning from remove_or_warn().
For the regular file and symlink cases, it's questionable whether the
warning was useful in the first place: unlink_entry() removes tracked
paths that should no longer be present in the state we are checking out
to. If the path had its leading dir replaced by another file, it means
that the basename already doesn't exist, so there is no need for a
warning. Sure, we are leaving a regular file or symlink behind at the
path's dirname, but this file is either untracked now (so again, no
need to warn), or it will be replaced by a tracked file during the next
phase of this checkout operation.
As for failing to lstat() one of the leading components, the basename
might still exist only we cannot unlink it (e.g. due to the lack of the
required permissions). Since the user expect it to be removed
(especially with checkout's --no-overlay option), add back the warning
in this more relevant case.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 1d718a5108 ("do not overwrite untracked symlinks", 2011-02-20),
the comment on top of threaded_check_leading_path() is outdated and no
longer reflects the behavior of this function. Let's updated it to avoid
confusions. While we are here, also remove some duplicated comments to
avoid similar maintenance problems.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor code I recently changed in 1f3299fda9 (fsck: make
fsck_config() re-usable, 2021-01-05) so that I could use fsck's config
callback in mktag in 1f3299fda9 (fsck: make fsck_config() re-usable,
2021-01-05).
I don't know what I was thinking in structuring the code this way, but
it clearly makes no sense to have an fsck_config_internal() at all
just so it can get a fsck_options when git_config() already supports
passing along some void* data.
Let's just make use of that instead, which gets us rid of the two
wrapper functions, and brings fsck's common config callback in line
with other such reusable config callbacks.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 56c6910028 (fsmonitor: change last update timestamp on the
index_state to opaque token, 2020-01-07), we forgot to adjust
`discard_index()` to release the "last-update" token: it is no longer a
64-bit number, but a free-form string that has been allocated.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 56c6910028 (fsmonitor: change last update timestamp on the
index_state to opaque token, 2020-01-07), we forgot to adjust the part
of `unpack_trees()` that copies the FSMonitor "last-update" information
that we copy from the source index to the result index since 679f2f9fdd
(unpack-trees: skip stat on fsmonitor-valid files, 2019-11-20).
Since the "last-update" information is no longer a 64-bit number, but a
free-form string that has been allocated, we need to duplicate it rather
than just copying it.
This is important because there _are_ cases when `unpack_trees()` will
perform a oneway merge that implicitly calls `refresh_fsmonitor()`
(which will allocate that "last-update" token). This happens _after_
that token was copied into the result index. However, we _then_ call
`check_updates()` on that index, which will _also_ call
`refresh_fsmonitor()`, accessing the "last-update" string, which by now
would be released already.
In the instance that lead to this patch, this caused a segmentation
fault during a lengthy, complicated rebase involving the todo command
`reset` that (crucially) had to updated many files. Unfortunately, it
seems very hard to trigger that crash, therefore this patch is not
accompanied by a regression test.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch fixes a bug where git-bisect doesn't handle receiving
annotated tags as "git bisect good <tag>", etc. It's a regression in
27257bc466 (bisect--helper: reimplement `bisect_state` & `bisect_head`
shell functions in C, 2020-10-15).
The original shell code called:
sha=$(git rev-parse --verify "$rev^{commit}") ||
die "$(eval_gettext "Bad rev input: \$rev")"
which will peel the input to a commit (or complain if that's not
possible). But the C code just calls get_oid(), which will yield the oid
of the tag.
The fix is to peel to a commit. The error message here is a little
non-idiomatic for Git (since it starts with a capital). I've mostly left
it, as it matches the other converted messages (like the "Bad rev input"
we print when get_oid() fails), though I did add an indication that it
was the peeling that was the problem. It might be worth taking a pass
through this converted code to modernize some of the error messages.
Note also that the test does a bare "grep" (not i18ngrep) on the
expected "X is the first bad commit" output message. This matches the
rest of the test script.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
4f37d45706 ("clone: respect remote unborn HEAD", 2021-02-05) introduces
a new feature (if the remote has an unborn HEAD, e.g. when the remote
repository is empty, use it as the name of the branch) that only works
in protocol v2, but did not ensure that one of its tests always uses
protocol v2, and thus that test would fail if
GIT_TEST_PROTOCOL_VERSION=0 (or 1) is used. Therefore, add "-c
protocol.version=2" to the appropriate test.
(The rest of the tests from that commit have "-c protocol.version=2"
already added.)
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow BLOCK_GROWTH_SIZE to be used like an integer literal by removing
the trailing semicolon from its definition. Also wrap the expression in
parentheses, to allow it to be used with operators without leading to
unexpected results. It doesn't matter for the current use site, but
make it follow standard macro rules anyway to avoid future surprises.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
23119ffb4e (block-sha1: put expanded macro parameters in parentheses,
2012-07-22) added a trailing semicolon to the definition of SHA_MIX
without explanation. It doesn't matter with the current code, but make
sure to avoid potential surprises by removing it again.
This allows the macro to be used almost like a function: Users can
combine it with operators of their choice, but still must not pass an
expression with side-effects as a parameter, as it would be evaluated
multiple times.
Signed-off-by: René Scharfe <l.s.r@web.de>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allocating a pre-cleared single element is quite common and it is
misleading to use CALLOC_ARRAY(); these allocations that would be
affected without this change are not allocating an array.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create a wrapper class for `unix_stream_listen()` that uses a ".lock"
lockfile to create the unix domain socket in a race-free manner.
Unix domain sockets have a fundamental problem on Unix systems because
they persist in the filesystem until they are deleted. This is
independent of whether a server is actually listening for connections.
Well-behaved servers are expected to delete the socket when they
shutdown. A new server cannot easily tell if a found socket is
attached to an active server or is leftover cruft from a dead server.
The traditional solution used by `unix_stream_listen()` is to force
delete the socket pathname and then create a new socket. This solves
the latter (cruft) problem, but in the case of the former, it orphans
the existing server (by stealing the pathname associated with the
socket it is listening on).
We cannot directly use a .lock lockfile to create the socket because
the socket is created by `bind(2)` rather than the `open(2)` mechanism
used by `tempfile.c`.
As an alternative, we hold a plain lockfile ("<path>.lock") as a
mutual exclusion device. Under the lock, we test if an existing
socket ("<path>") is has an active server. If not, we create a new
socket and begin listening. Then we use "rollback" to delete the
lockfile in all cases.
This wrapper code conceptually exists at a higher-level than the core
unix_stream_connect() and unix_stream_listen() routines that it
consumes. It is isolated in a wrapper class for clarity.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
