Inline expression when generating output rather than overwriting the
"sha1" local variable with a short SHA1.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This branch of the "if" is only executed if $no_ff is empty, which
only happens if $1 was not '-n'. (This code has been dead since
1d25c8cf82eead72e11287d574ef72d3ebec0db1.)
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test $no_ff separately rather than testing it indirectly by gluing it
onto a comparison of two SHA1s.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/checkout-merge-base:
rebase -i: teach --onto A...B syntax
rebase: fix --onto A...B parsing and add tests
"rebase --onto A...B" replays history on the merge base between A and B
"checkout A...B" switches to the merge base between A and B
* il/vcs-helper:
Reset possible helper before reusing remote structure
Remove special casing of http, https and ftp
Support remote archive from all smart transports
Support remote helpers implementing smart transports
Support taking over transports
Refactor git transport options parsing
Pass unknown protocols to external protocol handlers
Support mandatory capabilities
Add remote helper debug mode
Conflicts:
Documentation/git-remote-helpers.txt
transport-helper.c
If sb and sb2 are the same (i.e. doubling the string), the underlying
strbuf_add() can make sb2->buf invalid by calling strbuf_grow(sb) at
the beginning; if realloc(3) done by strbuf_grow() needs to move the
string, strbuf_add() will read from an already freed buffer.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cc/reset-more:
t7111: check that reset options work as described in the tables
Documentation: reset: add some missing tables
Fix bit assignment for CE_CONFLICTED
"reset --merge": fix unmerged case
reset: use "unpack_trees()" directly instead of "git read-tree"
reset: add a few tests for "git reset --merge"
Documentation: reset: add some tables to describe the different options
reset: improve mixed reset error message when in a bare repo
* nd/sparse: (25 commits)
t7002: test for not using external grep on skip-worktree paths
t7002: set test prerequisite "external-grep" if supported
grep: do not do external grep on skip-worktree entries
commit: correctly respect skip-worktree bit
ie_match_stat(): do not ignore skip-worktree bit with CE_MATCH_IGNORE_VALID
tests: rename duplicate t1009
sparse checkout: inhibit empty worktree
Add tests for sparse checkout
read-tree: add --no-sparse-checkout to disable sparse checkout support
unpack-trees(): ignore worktree check outside checkout area
unpack_trees(): apply $GIT_DIR/info/sparse-checkout to the final index
unpack-trees(): "enable" sparse checkout and load $GIT_DIR/info/sparse-checkout
unpack-trees.c: generalize verify_* functions
unpack-trees(): add CE_WT_REMOVE to remove on worktree alone
Introduce "sparse checkout"
dir.c: export excluded_1() and add_excludes_from_file_1()
excluded_1(): support exclude files in index
unpack-trees(): carry skip-worktree bit over in merged_entry()
Read .gitignore from index if it is skip-worktree
Avoid writing to buffer in add_excludes_from_file_1()
...
Conflicts:
.gitignore
Documentation/config.txt
Documentation/git-update-index.txt
Makefile
entry.c
t/t7002-grep.sh
Make sure that the status information:
- is shown as before without configuration nor command line option;
- is shown if commit.status is set to true and no command line option
is given, or --status is explicitly given;
- is not shown if commit.status is set to false and no command line
option is given, or --no-status is explicitly given.
Also make sure that the way lines taken from the custom --template appear
in the log message editor is not changed at all.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even when running without the -F (--fixed-strings) option, we checked the
pattern and used fixmatch() codepath when it does not contain any regex
magic. Finding fixed strings with strstr() surely must be faster than
running the regular expression crud.
Not so. It turns out that on some libc implementations, using the
regcomp()/regexec() pair is a lot faster than running strstr() and
strcasestr() the fixmatch() codepath uses. Drop the optimization and use
the fixmatch() codepath only when the user explicitly asked for it with
the -F option.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new configuration variable commit.status, and new command line
options --status, and --no-status control whether or not the git
status information is included in the commit message template
when using an editor to prepare the commit message. It does not
affect the effects of a user's commit.template settings.
Signed-off-by: James P. Howard, II <jh@jameshoward.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
remote-curl: Fix Accept header for smart HTTP connections
grep: -L should show empty files
rebase--interactive: Ignore comments and blank lines in peek_next_command
When calling a git command from a subdirectory and a file locking fails,
the user will get a path relative to the root of the worktree, which is
invalid from the place where the command is ran. Make it easy for the
user to know which file it is.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new notation '<branch>@{upstream}' refers to the branch <branch> is set
to build on top of. Missing <branch> (i.e. '@{upstream}') defaults to the
current branch.
This allows you to run, for example,
for l in list of local branches
do
git log --oneline --left-right $l...$l@{upstream}
done
to inspect each of the local branches you are interested in for the
divergence from its upstream.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This script passes the author and committer to git-commit via environment
variables, but it was missing the seccond T of COMMITTER in a few places.
Signed-off-by: Bart Trojanowski <bart@jukie.net>
Acked-by: Stelian Pop <stelian@popies.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Various commands refuse to run in the presence of conflicts (commit,
merge, pull, cherry-pick/revert). They all used to provide rough, and
inconsistant error messages.
A new variable advice.resolveconflict is introduced, and allows more
verbose messages, pointing the user to the appropriate solution.
For commit, the error message used to look like this:
$ git commit
foo.txt: needs merge
foo.txt: unmerged (c34a92682e0394bc0d6f4d4a67a8e2d32395c169)
foo.txt: unmerged (3afcd75de8de0bb5076942fcb17446be50451030)
foo.txt: unmerged (c9785d77b76dfe4fb038bf927ee518f6ae45ede4)
error: Error building trees
The "need merge" line is given by refresh_cache. We add the IN_PORCELAIN
option to make the output more consistant with the other porcelain
commands, and catch the error in return, to stop with a clean error
message. The next lines were displayed by a call to cache_tree_update(),
which is not reached anymore if we noticed the conflict.
The new output looks like:
U foo.txt
fatal: 'commit' is not possible because you have unmerged files.
Please, fix them up in the work tree, and then use 'git add/rm <file>' as
appropriate to mark resolution and make a commit, or use 'git commit -a'.
Pull is slightly modified to abort immediately if $GIT_DIR/MERGE_HEAD
exists instead of waiting for merge to complain.
The behavior of merge and the test-case are slightly modified to reflect
the usual flow: start with conflicts, fix them, and afterwards get rid of
MERGE_HEAD, with different error messages at each stage.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Perviously, the error message was:
git: 'remote-foo' is not a git-command. See 'git --help'.
By not treating the transport helper as a git command, a more suitable
error is reported:
fatal: Unable to find remote helper for 'foo'
Signed-off-by: Ilari Liusvaara <ilari.liusvaara@elisanet.fi>
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We actually expect to see an application/x-git-upload-pack-result
but we lied and said we Accept *-response. This was a typo on my
part when I was writing the code.
Fortunately the wrong Accept header had no real impact, as the
deployed git-http-backend servers were not testing the Accept
header before they returned their content.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, blank lines and/or comments within a series of
squash/fixup commands would confuse "git rebase -i" into thinking that
the series was finished. It would therefore require the user to edit
the commit message for the squash/fixup commits seen so far. Then,
after continuing, it would ask the user to edit the commit message
again.
Ignore comments and blank lines within a group of squash/fixup
commands, allowing them to be processed in one go.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
(For testing "rebase -i"): Support new action types in $FAKE_LINES to
allow comments and blank lines to be added to the "rebase -i" command
list.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
(For testing "rebase -i"): Output the "rebase -i" command script
before and after the edits, to make it clearer what the editor did.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There were the two strings "SHA1 ID: " and "SHA1 ID:" as description
for the SHA1 search textbox. Change it to two equal strings, the
space is now outside of the translated string.
Furthermore the German translation wasn't unique, but "SHA1:" resp.
"SHA1-Hashwert:". The former was displayed after initialisation, the
latter after changes to the textbox, for example when clearing the text.
But it was too long to be displayed fully, so use a shorter translation.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
If the user creates a tag with the "create tag" dialog in gitk and
then clicks on the newly-created tag, its contents don't get
displayed. The reason is that rereadrefs hasn't been called, meaning
the tag doesn't exist in $tagobjid. This causes the cat-file to fail.
Instead of using $tagobjid, pass the $tag directly, ensuring the tag
contents are populated correctly.
Signed-off-by: David Dulson <dave@dulson.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Currently, tags created using the "create tag" dialog in gitk are
always lightweight tags, i.e., they don't have any annotation
(message). This enables the user to specify a message; if they do,
gitk will create an unsigned, annotated tag object.
Signed-off-by: David Dulson <dave@dulson.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
[Junio C Hamano <gitster@pobox.com>: Fix a couple of wrapped lines]
Signed-off-by: Laszlo Papp <djszapi@archlinux.us>
Signed-off-by: Paul Mackerras <paulus@samba.org>
* jc/maint-1.6.4-grep-lookahead:
grep: optimize built-in grep by skipping lines that do not hit
This needs to be an evil merge as fixmatch() changed signature since
5183bf6 (grep: Allow case insensitive search of fixed-strings,
2009-11-06).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The internal "grep" engine we use checks for hits line-by-line, instead of
letting the underlying regexec()/fixmatch() routines scan for the first
match from the rest of the buffer. This was a major source of overhead
compared to the external grep.
Introduce a "look-ahead" mechanism to find the next line that would
potentially match by using regexec()/fixmatch() in the remainder of the
text to skip unmatching lines, and use it when the query criteria is
simple enough (i.e. punt for an advanced grep boolean expression like
"lines that have both X and Y but not Z" for now) and we are not running
under "-v" (aka "--invert-match") option.
Note that "-L" (aka "--files-without-match") is not a reason to disable
this optimization. Under the option, we are interested if the file has
any hit at all, and that is what we determine reliably with or without the
optimization.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The -L (--files-without-match) option is supposed to show paths that
produced no matches. When running the internal grep on work tree files,
however, we had an optimization to just return on zero-sized files,
without doing anything.
This optimization doesn't matter too much in practice (a tracked empty
file must be rare, or there is something wrong with your project); to
produce results consistent with GNU grep, we should stop the optimization
and show empty files as not having the given pattern.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The error message in case of non-fast forward points to 'git push
--help', but used to talk about a section 'non-fast-forward', while the
actual section name is 'Note about fast-forwards'.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, blank lines and/or comments within a series of
squash/fixup commands would confuse "git rebase -i" into thinking that
the series was finished. It would therefore require the user to edit
the commit message for the squash/fixup commits seen so far. Then,
after continuing, it would ask the user to edit the commit message
again.
Ignore comments and blank lines within a group of squash/fixup
commands, allowing them to be processed in one go.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Linux TIOCGWINSZ is defined somehwere in ioctl.h, which is already
included. On Solaris we also need to include termios.h. Without this
term_columns() in help.c will think TIOCGWINSZ is not supported and
always return 80 columns.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the unlink_entry function to use rmdir to remove submodule
directories. Currently we try to use unlink, which will never succeed.
Of course rmdir will only succeed for empty (i.e. not checked out)
submodule directories. Behaviour if a submodule is checked out stays
essentially the same: print a warning message and keep the submodule
directory.
Signed-off-by: Peter Collingbourne <peter@pcc.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
