A lot of modules that have nothing to do with git-shell functionality
were linked in, bloating git-shell more than 8 times.
This patch cuts off redundant dependencies by:
1. providing stubs for three functions that make no sense for git-shell;
2. moving quote_path_fully from environment.c to quote.c to make the
later self sufficient;
3. moving make_absolute_path into a new separate file.
The following numbers have been received with the default optimization
settings on master using GCC 4.1.2:
Before:
text data bss dec hex filename
143915 1348 93168 238431 3a35f git-shell
After:
text data bss dec hex filename
17670 788 8232 26690 6842 git-shell
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before this patch, something like "git help tutorial" did not work,
people had to use "git help gittutorial" which is not very intuitive.
This patch uses the "is_git_command" function to test early if the
argument passed to "git help" is a git command, and if this is not the
case then we prefix the argument with "git" instead of "git-".
This way, things like "git help tutorial" or "git help glossary" will
work fine.
The little downside of this patch is that the "is_git_command" is a
little bit slow.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When working with a lot of people who backport patches all day long, every
once in a while I get a patch that modifies the same file more than once
inside the same patch. git-apply either fails if the second change relies
on the first change or silently drops the first change if the second change
is independent.
The silent part is the scary scenario for us. Also this behaviour is
different from the patch-utils.
I have modified git-apply to create a table of the filenames of files it
modifies such that if a later patch chunk modifies a file in the table it
will buffer the previously changed file instead of reading the original file
from disk.
Logic has been put in to handle creations/deletions/renames/copies. All the
relevant tests of git-apply succeed.
A new test has been added to cover the cases I addressed.
The fix is relatively straight-forward.
Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, if there was an error while storing a local
tracking ref, the low-level functions would report an error,
but fetch's status output wouldn't indicate any problem.
E.g., imagine you have an old "refs/remotes/origin/foo/bar" but
upstream has deleted "foo/bar" in favor of a new branch
"foo". You would get output like this:
error: there are still refs under 'refs/remotes/origin/foo'
From $url_of_repo
* [new branch] foo -> origin/foo
With this patch, the output takes into account the status of
updating the local ref:
error: there are still refs under 'refs/remotes/origin/foo'
From $url_of_repo
! [new branch] foo -> origin/foo (unable to update local ref)
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we call "git clone" with a url that has a rewrite rule in either
$HOME/.gitconfig or /etc/gitconfig, the URL can be different from
what the command line expects it to be.
So, let's use the URL as the remote structure has it, not the literal
string from the command line.
Noticed by Pieter de Bie.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Acked-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a very well established command line convention that old residents
of the git mailing list knew by heart and nobody even thought about
documenting it explicitly, which was not very nice.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now "diff --check" can detect not just whitespace errors but also notices
leftover conflict marker lines, we can use it in the sample pre-commit
hook script.
These days the object layer knows about the empty tree object without
actually having one in the repository, so we can run the test even for the
initial commit.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This teaches "diff --check" to detect and complain if the change
adds lines that look like leftover conflict markers.
We should be able to remove the old Perl script used in the sample
pre-commit hook and modernize the script with this facility.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a patch adds new blank lines at the end, "git apply --whitespace"
warns. This teaches "diff --check" to do the same.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function name was too bland and not explicit enough as to what it is
checking. Split it into two, and call the one that checks if there is a
whitespace breakage "ws_check()", and call the other one that checks and
emits the line after color coding "ws_check_emit()".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All other codepaths refrain from running textual diff when either the old
or the new side is binary, but this function only checks the new side. I
was almost going to change it to check both, but that would be a bad
change. Explain why to prevent future mistakes.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a backport of 0a47dc110e
to 'maint' to be included in 1.5.6.2 so that older server side
can accept dashless form of request when clients are updated.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git diff --check" should return non-zero when there was any whitespace
error but the code only paid attention to the error status of the last
new line in the patch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, we did a sanity check by doing for-each-ref
using each possible format atom. However, we never checked
the actual output produced by that atom, which recently let
an obvious bug go undetected for some time.
While we're at it, also clean up a few '!' into
test_must_fail.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I'm working with a perforce repo using git-p4. There are some config
files which I need to change locally according to my environment. I'm
using a 'local' git branch to park these changes. And I want to avoid
accidentally checking them into p4 just by doing "git p4 submit"
mindlessly without realizing which branch I'm actually on.
This patch adds a new git config, 'git-p4.allowSubmit', which is a
whitelist of branch names. "git p4 submit" will only allow submissions
from local branches on the list. Useful for preventing inadvertently
submitting from a strictly local branch.
For backward compatibility, if this config is not set at all,
submissions from all branches are allowed.
Signed-off-by: Jing Xue <jingxue@digizenstudio.com>
Acked-By: Simon Hausmann <simon@lst.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sometimes it is desirable to have non-fast-forward branches in a
shared repository. A typical example of that is the 'pu' branch.
This patch extends the format of allowed-users and allow-groups
files by using the '+' sign at the beginning as the mark that
non-fast-forward pushes are permitted to the branch.
Signed-off-by: Dmitry Potapov <dpotapov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We do this by handing over the Net::SMTP instance to Net::SMTP::SSL,
which avoids Net::SMTP::TLS and its weird error checking. This trick
is due to Brian Evins.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a fifo is given, validation must be skipped because we can't
read the fifo twice. Ideally git-send-email would cache the read
data instead of attempting to read twice, but for now just skip
validation.
Signed-off-by: Kevin Ballard <kevin@sb.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As announced for 1.6.0.
Git older than version 1.5.2 (or any other git version with this option
set to 1) may revert to version 1 of the pack index by manually deleting
all .idx files and recreating them using 'git index-pack'. Communication
over the git native protocol is unaffected since the pack index is never
transferred.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
GIT 1.5.6.1
fix update-hook-example to work with packed tag references
clone: create intermediate directories of destination repo
for-each-ref: implement missing tag values
git-rebase.sh: Add check if rebase is in progress
Resetting a selected set of index entries is done with
"git reset -- paths" syntax, but we did not allow -- to be omitted
even when the command is unambiguous.
This updates the command to follow the general rule:
* When -- appears, revs come before it, and paths come after it;
* When there is no --, earlier ones are revs and the rest are paths, and
we need to guess. When lack of -- marker forces us to guess, we
protect from user errors and typoes by making sure what we treat as
revs do not appear as filenames in the work tree, and what we treat as
paths do appear as filenames in the work tree, and by erroring out if
that is not the case. We tell the user to disambiguate by using -- in
such a case.
which is employed elsewhere in the system.
When this rule is applied to "reset", because we can have only zero or one
rev to the command, the check can be slightly simpler than other programs.
We have to check only the first one or two tokens after the command name
and options, and when they are:
-- A:
no explicit rev given; "A" and whatever follows it are paths.
A --:
explicit rev "A" given and whatever follows the "--" are paths.
A B:
"A" could be rev or path and we need to guess. "B" could
be missing but if exists that (and everything that follows) would
be paths.
So we apply the guess only in the last case and only to "A" (not "B" and
what comes after it).
* As long as "A" is unambiguously a path, index entries for "A", "B" (and
everything that follows) are reset to the HEAD revision.
* If "A" is unambiguously a rev, on the other hand, the index entries for
"B" (and everything that follows) are reset to the "A" revision.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The perldiag(1) has following to say about this:
"Can't do inplace edit without backup"
(F) You're on a system such as MS-DOS that gets confused if
you try reading from a deleted (but still opened) file. You
have to say -i.bak, or some such.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* lt/config-fsync:
Add config option to enable 'fsync()' of object files
Split up default "i18n" and "branch" config parsing into helper routines
Split up default "user" config parsing into helper routine
Split up default "core" config parsing into helper routine
* sr/tests:
Hook up the result aggregation in the test makefile.
A simple script to parse the results from the testcases
Modify test-lib.sh to output stats to t/test-results/*
Conflicts:
t/test-lib.sh
* jh/clone-packed-refs:
Teach "git clone" to pack refs
Prepare testsuite for a "git clone" that packs refs
Move pack_refs() and friends into libgit
Incorporate fetched packs in future object traversal
The update-hook-example used 'test -f' to check the tag present, which
does not work if the checked reference is packed. This check has been
changed to use 'git rev-parse $tag' instead.
Signed-off-by: Dmitry Potapov <dpotapov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The shell version used to use "mkdir -p" to create the repo
path, but the C version just calls "mkdir". Let's replicate
the old behavior. We have to create the git and worktree
leading dirs separately; while most of the time, the
worktree dir contains the git dir (as .git), the user can
override this using GIT_WORK_TREE.
We can reuse safe_create_leading_directories, but we need to
make a copy of our const buffer to do so. Since
merge-recursive uses the same pattern, we can factor this
out into a global function. This has two other cleanup
advantages for merge-recursive:
1. mkdir_p wasn't a very good name. "mkdir -p foo/bar" actually
creates bar, but this function just creates the leading
directories.
2. mkdir_p took a mode argument, but it was completely
ignored.
Acked-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "type" and "object" fields for tags were accepted as
valid atoms, but never implemented. Consequently, they
simply returned the empty string, even for valid tags.
Noticed by Lea Wiemann.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As announced for 1.6.0.
Access over the native protocol by old git versions is unaffected as
this capability is negociated by the protocol. Otherwise setting this
config option to "false" and doing a 'git repack -a -d' is enough to
remain compatible with ancient git versions (older than 1.4.4).
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To do so, check_pack_crc() moved from builtin-pack-objects.c to
pack-check.c where it is more logical to share.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is called when verify_pack() has its verbose argument set, and
verbose in this context makes sense only for the actual 'git verify-pack'
command. Therefore let's move show_pack_info() to builtin-verify-pack.c
instead and remove useless verbose argument from verify_pack().
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using find_pack_entry_one() to get object offsets is rather suboptimal
when nth_packed_object_offset() can be used directly.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The shell version used to use "mkdir -p" to create the repo
path, but the C version just calls "mkdir". Let's replicate
the old behavior. We have to create the git and worktree
leading dirs separately; while most of the time, the
worktree dir contains the git dir (as .git), the user can
override this using GIT_WORK_TREE.
We can reuse safe_create_leading_directories, but we need to
make a copy of our const buffer to do so. Since
merge-recursive uses the same pattern, we can factor this
out into a global function. This has two other cleanup
advantages for merge-recursive:
1. mkdir_p wasn't a very good name. "mkdir -p foo/bar" actually
creates bar, but this function just creates the leading
directories.
2. mkdir_p took a mode argument, but it was completely
ignored.
Acked-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
