Commit Graph

388 Commits

Author SHA1 Message Date
Anand Kumria
5b5aa22f00 Put in the two other configuration elements found in the source
I am not entirely clear what these parameters do but felt it
 useful to call them out in the documentation.

Signed-off-by: Anand Kumria <wildfire@progsoc.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-11 18:57:04 -07:00
Anand Kumria
b87a659635 Put some documentation in about the parameters that have been added
Signed-off-by: Anand Kumria <wildfire@progsoc.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-11 18:57:04 -07:00
Anand Kumria
bc02acfc76 Move git-p4.syncFromOrigin into a configuration parameters section
Signed-off-by: Anand Kumria <wildfire@progsoc.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-11 18:57:04 -07:00
Anand Kumria
3cafb7d8ce Consistently use 'git-p4' for the configuration entries
Signed-off-by: Anand Kumria <wildfire@progsoc.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-11 18:57:04 -07:00
Anand Kumria
abcaf07360 If the user has configured various parameters, use them.
Some repositories require authentication and access to certain
 hosts. Allow git-p4 to pull this information from the configuration

Signed-off-by: Anand Kumria <wildfire@progsoc.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-11 18:57:04 -07:00
Anand Kumria
155af83491 Switch to using 'p4_build_cmd'
Signed-off-by: Anand Kumria <wildfire@progsoc.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-11 18:57:04 -07:00
Anand Kumria
ee06427aa6 If we are in verbose mode, output what we are about to run (or return)
Signed-off-by: Anand Kumria <wildfire@progsoc.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-11 18:57:04 -07:00
Anand Kumria
21a5075385 Add a single command that will be used to construct the 'p4' command
Rather than having three locations where the 'p4' command is built up,
 refactor this into the one place. This will, eventually, allow us to
 have one place where we modify the evironment or pass extra
 command-line options to the 'p4' binary.

Signed-off-by: Anand Kumria <wildfire@progsoc.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-11 18:57:04 -07:00
Anand Kumria
87b611d5fd Utilise the new 'p4_system' function.
Signed-off-by: Anand Kumria <wildfire@progsoc.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-11 18:57:03 -07:00
Anand Kumria
bf9320f151 Have a command that specifically invokes 'p4' (via system)
Similiar to our 'p4_read_pipe_lines' command, we can isolate
 specific changes to the invocation method in the one location
 with this change.

Signed-off-by: Anand Kumria <wildfire@progsoc.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-11 18:57:03 -07:00
Anand Kumria
b340fa4301 Utilise the new 'p4_read_pipe_lines' command
Now that we have the new command, we can utilise it and then
 eventually, isolate any changes required to the one place.

Signed-off-by: Anand Kumria <wildfire@progsoc.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-11 18:57:03 -07:00
Anand Kumria
2318121bab Create a specific version of the read_pipe_lines command for p4 invocations
This will make it easier to isolate changes to how 'p4' is invoked
 (whether with parameters or not, etc.).

Signed-off-by: Anand Kumria <wildfire@progsoc.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-11 18:57:03 -07:00
Daniel Barkalow
2d71bde2d1 In perforce, RCS keywords are case-sensitive
At least, this is true in 2007.2, according to the documentation.

Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-23 11:33:34 -07:00
Johannes Schindelin
be612c2318 Add another fast-import example, this time for .zip files
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-01 00:48:17 -07:00
Jing Xue
4c2d5d722c Add 'git-p4.allowSubmit' to git-p4
I'm working with a perforce repo using git-p4. There are some config
files which I need to change locally according to my environment. I'm
using a 'local' git branch to park these changes. And I want to avoid
accidentally checking them into p4 just by doing "git p4 submit"
mindlessly without realizing which branch I'm actually on.

This patch adds a new git config, 'git-p4.allowSubmit', which is a
whitelist of branch names. "git p4 submit" will only allow submissions
from local branches on the list. Useful for preventing inadvertently
submitting from a strictly local branch.

For backward compatibility, if this config is not set at all,
submissions from all branches are allowed.

Signed-off-by: Jing Xue <jingxue@digizenstudio.com>
Acked-By: Simon Hausmann <simon@lst.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-26 12:10:42 -07:00
Marius Storm-Olsen
f3e5ae4f06 git-p4: Handle Windows EOLs properly after removal of p4 submit template handling.
git-p4s handling of Windows style EOL was broken after the removal
of the p4 submit template handling in commit f2a6059. Fix that, and
make getP4OpenedType() more robust.

Signed-off-by: Marius Storm-Olsen <marius@trolltech.com>
Signed-off-by: Simon Hausmann <simon@lst.de>
2008-03-28 16:27:39 +01:00
Shawn Bohrer
82cea9ffb1 git-p4: Use P4EDITOR environment variable when set
Perforce allows you to set the P4EDITOR environment variable to your
preferred editor for use in perforce.  Since we are displaying a
perforce changelog to the user we should use it when it is defined.

Signed-off-by: Shawn Bohrer <shawn.bohrer@gmail.com>
Signed-off-by: Simon Hausmann <simon@lst.de>
2008-03-13 08:57:29 +01:00
Shawn Bohrer
67abd41716 git-p4: Unset P4DIFF environment variable when using 'p4 -du diff'
A custom diffing utility can be specified for the 'p4 diff' command by
setting the P4DIFF environment variable.  However when using a custom
diffing utility such as 'vimdiff' passing options like -du can cause
unexpected behavior.

Since the goal is to generate a unified diff of the changes and attach
them to the bottom of the p4 submit log we should unset P4DIFF if it
has been set in order to generate the diff properly.

Signed-off-by: Shawn Bohrer <shawn.bohrer@gmail.com>
Signed-off-by: Simon Hausmann <simon@lst.de>
2008-03-13 08:57:29 +01:00
Marius Storm-Olsen
8ff45f2af5 git-p4: Optimize the fetching of data from perforce.
Use shallow copies in loop, and join content at the end. Then do the substitution, if needed.

Signed-off-by: Marius Storm-Olsen <marius@trolltech.com>
Signed-off-by: Simon Hausmann <simon@lst.de>
2008-03-13 08:57:29 +01:00
Simon Hausmann
30b5940bcd git-p4: Fix import of changesets with file deletions
Commit 3a70cdfa42 made readP4Files abort quickly
when the changeset only contains files that are marked for deletion with an empty return
value, which caused the commit to not do anything.

This commit changes readP4Files to distinguish between files that need to be passed to p4
print and files that have no content ("deleted") and merge them in the returned
list.

Signed-off-by: Simon Hausmann <simon@lst.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-03-03 21:53:51 -08:00
Tor Arvid Lund
3a70cdfa42 git-p4: Support usage of perforce client spec
When syncing, git-p4 will only download files that are included in the active
perforce client spec. This does not change the default behaviour - it requires
that the user either supplies the command line argument --use-client-spec, or
sets the git config option p4.useclientspec to "true".

Signed-off-by: Tor Arvid Lund <torarvid@gmail.com>
Signed-off-by: Simon Hausmann <simon@lst.de>
2008-02-27 16:27:13 +01:00
Simon Hausmann
4c750c0d8b git-p4: git-p4 submit cleanups.
Removed storing the list of commits in a configuration file. We only need the list
of commits at run-time.

Signed-off-by: Simon Hausmann <simon@lst.de>
2008-02-27 16:27:10 +01:00
Simon Hausmann
0e36f2d726 git-p4: Removed git-p4 submit --direct.
This feature was originally meant to allow for quicker direct submits into perforce, but
it turns out that it is not actually quicker than doing a git commit and then running
git-p4 submit.

Signed-off-by: Simon Hausmann <simon@lst.de>
2008-02-27 16:27:07 +01:00
Simon Hausmann
edae1e2f40 git-p4: Clean up git-p4 submit's log message handling.
Instead of trying to substitute fields in the p4 submit template we now simply
replace the description of the submit with the log message of the git commit.

Signed-off-by: Simon Hausmann <simon@lst.de>
2008-02-27 16:27:03 +01:00
Simon Hausmann
4b61b5c963 git-p4: Remove --log-substitutions feature.
This turns out to be rarely useful and is already covered by git's commit.template configuration variable.

Signed-off-by: Simon Hausmann <simon@lst.de>
2008-02-27 16:26:57 +01:00
Tommy Thorn
354081d5a0 git-p4: support exclude paths
Teach git-p4 about the -/ option which adds depot paths to the exclude
list, used when cloning. The option is chosen such that the natural
Perforce syntax works, eg:

  git p4 clone //branch/path/... -//branch/path/{large,old}/...

Trailing ... on exclude paths are optional.

This is a generalization of a change by Dmitry Kakurin (thanks).

Signed-off-by: Tommy Thorn <tommy-git@thorn.ws>
Signed-off-by: Simon Hausmann <simon@lst.de>
2008-02-27 15:17:05 +01:00
Toby Allsopp
053d9e432b git-p4: Fix indentation from tab to spaces
Signed-off-by: Toby Allsopp <toby.allsopp@navman.co.nz>
2008-02-07 00:39:08 -08:00
Tommy Thorn
147402a2e9 git-p4: Fix an obvious typo
The regexp "$," can't match anything. Clearly not intended.

This was introduced in ce6f33c8 which is quite a while ago.

Signed-off-by: Tommy Thorn <tommy-git@thorn.ws>
Acked-by: Simon Hausmann <simon@lst.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-03 13:00:15 -08:00
Simon Hausmann
36ee4ee40e git-p4: Ensure the working directory and the index are clean before "git-p4 rebase"
Signed-off-by: Simon Hausmann <simon@lst.de>
2008-02-03 19:19:16 +01:00
Simon Hausmann
e96e400f67 git-p4: Fix submit user-interface.
Don't ask any questions when submitting, behave similar to git-svn dcommit.

Signed-off-by: Simon Hausmann <simon@lst.de>
2008-02-03 19:19:05 +01:00
Jason McMullan
f3e9512be1 Remove $Id: ..$ $Header: ..$ etc from +ko and +k files during import
This patch removes the '$Keyword: ...$' '...' data, so that files
don't have spurious megre conflicts between branches.

Handles both +ko and +k styles, and leaves the '$Foo$' in
the original file.

Signed-off-by: Simon Hausmann <simon@lst.de>
2008-02-03 19:18:33 +01:00
Shun Kei Leung
183f84365d git-p4: Fix typo in --detect-labels
Signed-off-by: Kevin Leung <kevinlsk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-11-20 23:27:44 -08:00
Simon Hausmann
38f9f5ec41 git-p4: Fix direct import from perforce after fetching changes through git from origin
When using an existing git repository to cache the perforce import we don't
fetch the branch mapping from perforce as that is a slow operation. However
the origin repository may not be fully up-to-date and therefore it may be
necessary to import more changes directly from Perforce.

Such a direct import needs self.knownBranches to be set up though, so
initialize it from the existing p4/* git branches.

Signed-off-by: Simon Hausmann <simon@lst.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-11-16 01:32:59 -08:00
Chris Pettitt
c65b670e85 git-p4: Detect changes to executable bit and include them in p4 submit.
This changeset takes advantage of the new parseDiffTreeEntry(...) function to
detect changes to the execute bit in the git repository.  During submit, git-p4
now looks for changes to the executable bit and if it finds them it "reopens"
the file in perforce, which allows it to change the file type.

The logic for adding the executable bit in perforce is straightforward: the +x
modifier can be used. Removing the executable bit in perforce requires that the
entire filetype be redefined (there is no way to join remove the bit with a -x
modifier, for example). This changeset includes logic to remove the executable
bit from the full file type while preserving the base file type and other
modifiers.

Signed-off-by: Chris Pettitt <cpettitt@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-11-02 02:01:32 -07:00
Chris Pettitt
b43b0a3c5c git-p4: Add a helper function to parse the full git diff-tree output.
Signed-off-by: Chris Pettitt <cpettitt@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-11-02 02:01:32 -07:00
Chris Pettitt
d9a5f25b67 git-p4 support for perforce renames.
The current git-p4 implementation does support file renames. However, because
it does not use the "p4 integrate" command, the history for the renamed file is
not linked to the new file.

This changeset adds support for perforce renames with the integrate command.
Currently this feature is only enabled when calling git-p4 submit with the -M
option. This is intended to look and behave similar to the "detect renames"
feature of other git commands.

The following sequence is used for renamed files:

    p4 integrate -Dt x x'
    p4 edit x'
    rm x'
    git apply
    p4 delete x

By default, perforce will not allow an integration with a target file that has
been deleted. That is, if x' in the example above is the name of a previously
deleted file then perforce will fail the integrate. The -Dt option tells
perforce to allow the target of integrate to be a previously deleted file.

Signed-off-by: Chris Pettitt <cpettitt@gmail.com>
Signed-off-by: Simon Hausmann <simon@lst.de>
2007-10-20 17:12:16 +02:00
Simon Hausmann
209471493a git-p4: When skipping a patch as part of "git-p4 submit" make sure we correctly revert to the previous state of the files using "p4 revert".
Signed-off-by: Simon Hausmann <simon@lst.de>
2007-10-20 17:12:02 +02:00
Marius Storm-Olsen
a9834f5833 Add 'git-p4 commit' as an alias for 'git-p4 submit'
Given that git uses 'commit', git-p4's 'sumbit' was a bit confusing at times;
often making me do 'git submit' and 'git-p4 commit' instead.

Signed-off-by: Marius Storm-Olsen <marius@trolltech.com>
Acked-By: Simon Hausmann <simon@lst.de>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-10-15 21:30:31 -04:00
Junio C Hamano
4f337e2466 Merge branch 'maint'
* maint:
  git-svn: don't attempt to spawn pager if we don't want one
  Supplant the "while case ... break ;; esac" idiom
  User Manual: add a chapter for submodules
  user-manual: don't assume refs are stored under .git/refs
  Detect exec bit in more cases.
  Conjugate "search" correctly in the git-prune-packed man page.
  Move the paragraph specifying where the .idx and .pack files should be
  Documentation/git-lost-found.txt: drop unnecessarily duplicated name.
2007-09-23 17:13:55 -07:00
David Brown
b9fc6ea9ef Detect exec bit in more cases.
git-p4 was missing the execute bit setting if the file had other attribute
bits set.

Acked-By: Simon Hausmann <simon@lst.de>
2007-09-22 15:41:50 -07:00
Jeff King
e349026812 contrib/fast-import: add perl version of simple example
This is based on the git-import.sh script, but is a little
more robust and efficient. More importantly, it should
serve as a quick template for interfacing fast-import with
perl scripts.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-09-18 03:14:18 -07:00
Nguyen Thai Ngoc Duy
7f8cfadf21 contrib/fast-import: add simple shell example
This example just puts a directory under git control. It is
significantly slower than using the git tools directly, but
hopefully shows a bit how fast-import works.

  [jk: added header comments]

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-09-18 03:14:16 -07:00
Simon Hausmann
1ca3d71069 git-p4: Added support for automatically importing newly appearing perforce branches.
If a change in a p4 "branch" appears that hasn't seen any previous commit and
that has a known branch mapping we now try to import it properly. First we
find the p4 change of the source branch that the new p4 branch is based on. Then
we using git rev-list --bisect to locate the corresponding git commit to that change.
Finally we import all changes in the new p4 branch up to the current change and resume
with the regular import.

Signed-off-by: Simon Hausmann <simon@lst.de>
2007-09-03 20:35:39 +02:00
Simon Hausmann
8134f69c21 git-p4: Cleanup; moved the (duplicated) code for turning a branch into a git ref (for example foo -> refs/remotes/p4/<project>/foo) into a separate method.
Signed-off-by: Simon Hausmann <simon@lst.de>
2007-09-03 20:35:37 +02:00
Simon Hausmann
c208a24310 git-p4: Cleanup; moved the code for the initial #head or revision import into a separate function, out of P4Sync.run.
Signed-off-by: Simon Hausmann <simon@lst.de>
2007-09-03 20:35:25 +02:00
Simon Hausmann
1c49fc197b git-p4: Cleanup; Turn self.revision into a function local variable (it's not used anywhere outside the function).
Signed-off-by: Simon Hausmann <simon@lst.de>
2007-09-03 20:35:13 +02:00
Simon Hausmann
e87f37ae42 git-p4: Cleanup; moved the code to import a list of p4 changes using fast-import into a separate member function of P4Sync.
Signed-off-by: Simon Hausmann <simon@lst.de>
2007-09-03 20:34:56 +02:00
Simon Hausmann
4f6432d8cc git-p4: Cleanup; moved the code for getting a sorted list of p4 changes for a list of given depot paths into a standalone method.
Signed-off-by: Simon Hausmann <simon@lst.de>
2007-09-03 20:34:32 +02:00
Simon Hausmann
14594f4b57 git-p4: After submission to p4 always synchronize from p4 again (into refs/remotes). Whether to rebase HEAD or not is still left as question to the end-user.
Signed-off-by: Simon Hausmann <simon@lst.de>
2007-09-03 20:27:02 +02:00
Simon Hausmann
31f9ec129e git-p4: Always call 'p4 sync ...' before submitting to Perforce.
Acked-by: Marius Storm-Olsen <marius@trolltech.com>
Acked-by: Thiago Macieira <thiago@kde.org>
2007-09-03 20:27:02 +02:00
Simon Hausmann
0058a33a8e git-p4: Fix warnings about non-existant refs/remotes/p4/HEAD ref when running git-p4 sync the first time after a git clone.
Don't create the p4/HEAD symbolic ref if p4/master doesn't exist yet.

Signed-off-by: Simon Hausmann <simon@lst.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-08-24 18:54:37 -07:00
Simon Hausmann
5ca4461728 git-p4: Make 'git-p4 branches' work after an initial clone with git clone from an origin-updated repository.
After a clone with "git clone" of a repository the p4 branches are only in remotes/origin/p4/* and not in remotes/p4/*.
Separate the code for detection and creation out of the P4Sync command class into standalone methods and use them
from the P4Branches command.

Signed-off-by: Simon Hausmann <simon@lst.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-08-24 18:54:37 -07:00
Reece H. Dunn
7da660f437 git-p4: Fix the sorting of changelists when cloning a Perforce repository.
When performing a git-p4 clone operation on a Perforce repository,
where the changelists change in order of magnitude (e.g. 100 to 1000),
the set of changes to import from is not sorted properly. This is
because the data in the list is strings not integers. The other place
where this is done already converts the value to an integer, so it is
not affected.

Acked-by: Simon Hausmann <simon@lst.de>
2007-08-13 15:23:14 -07:00
Simon Hausmann
ea99c3ae0e git-p4: Fix git-p4 submit to include only changed files in the perforce submit template.
Parse the files section in the "p4 change -o" output and remove lines with file changes in unrelated depot paths.

Signed-off-by: Simon Hausmann <simon@lst.de>
Signed-off-by: Marius Storm-Olsen <marius@trolltech.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-08-08 13:45:04 -07:00
Simon Hausmann
74276ec6f2 git-p4: Fix support for symlinks.
Detect symlinks as file type, set the git file mode accordingly and strip off the trailing newline in the p4 print output.
Make the mode handling a bit more readable at the same time.

Signed-off-by: Simon Hausmann <simon@lst.de>
Acked-by: Brian Swetland <swetland@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-08-08 01:58:05 -07:00
Han-Wen Nienhuys
7fcff9def5 Fix style nit in Python slicing.
Python slices start at 0 by default.

Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Simon Hausmann <simon@lst.de>
2007-08-02 09:40:28 +02:00
Han-Wen Nienhuys
a4eba020f9 Sort output of "p4 change" in incremental import before further
processing

P4 change outputs the changes sorted for each directory separately. We
want the global ordering on the changes, hence we sort.

Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Simon Hausmann <simon@lst.de>
2007-08-02 09:40:25 +02:00
Simon Hausmann
b2d2d16af7 git-p4: Fix p4 user cache population on Windows.
Fall back to USERPROFILE if HOME isn't set.

Signed-off-by: Simon Hausmann <shausman@trolltech.com>
Signed-off-by: Marius Storm-Olsen <marius@trolltech.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-25 16:06:54 -07:00
Simon Hausmann
144ff46b19 git-p4: Cleanup, used common function for listing imported p4 branches
Signed-off-by: Simon Hausmann <simon@lst.de>
2007-07-18 17:29:38 +02:00
Simon Hausmann
86506fe54c git-p4: Fix upstream branch detection for submit/rebase with multiple branches.
Don't use git name-rev to locate the upstream git-p4 branch for rebase and submit but instead locate the branch by comparing the depot paths.
name-rev may produce results like wrongbranch~12 as it uses the first match.

Signed-off-by: Simon Hausmann <simon@lst.de>
Signed-off-by: Marius Storm-Olsen <marius@trolltech.com>
2007-07-18 17:29:31 +02:00
Simon Hausmann
062410bb9d git-p4: Cleanup, make listExistingP4Branches a global function for later use.
Signed-off-by: Simon Hausmann <simon@lst.de>
Signed-off-by: Marius Storm-Olsen <marius@trolltech.com>
2007-07-18 17:29:05 +02:00
Scott Lamb
788001908c git-p4: input to "p4 files" by stdin instead of arguments
This approach, suggested by Alex Riesen, bypasses the need for xargs-style
argument list handling. The handling in question looks broken in a corner
case with SC_ARG_MAX=4096 and final argument over 96 characters.

Signed-off-by: Scott Lamb <slamb@slamb.org>
Signed-off-by: Simon Hausmann <simon@lst.de>
2007-07-17 08:35:33 +02:00
Scott Lamb
9f90c7335e git-p4: use subprocess in p4CmdList
This allows bidirectional piping - useful for "-x -" to avoid commandline
arguments - and is a step toward bypassing the shell.

Signed-off-by: Scott Lamb <slamb@slamb.org>
Signed-off-by: Simon Hausmann <simon@lst.de>
2007-07-17 08:35:24 +02:00
Marius Storm-Olsen
48b4c3d5ab Fix git-p4 on Windows to not use the Posix sysconf function.
Add condition for Windows, since it doesn't support the os.sysconf module.
We hardcode the commandline limit to 2K, as that should work on most
Windows platforms.

Signed-off-by: Marius Storm-Olsen <marius@trolltech.com>
Acked-by: Simon Hausmann <simon@lst.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-07-14 22:47:14 -04:00
Shawn O. Pearce
610f043bb3 Import branch 'git-p4' of git://repo.or.cz/fast-export
Simon has asked that the git.git project include the git-p4 project
as at least a contrib/fast-import within git.git.  I think it makes
a lot of sense, as git-p4 nicely complements the only other in-tree
fast-import user: import-tars.perl.

git-p4 is offered under the MIT license by its authors.
2007-06-22 19:16:22 -04:00
Simon Hausmann
9ceab36375 Make it possible to specify the HEAD for the internal findUpstreamBranchPoint function.
This isn't used right now in git-p4 but I use it in an external script that loads git-p4 as module.

Signed-off-by: Simon Hausmann <shausman@trolltech.com>
2007-06-22 00:00:34 +02:00
Simon Hausmann
09d89de2e3 Added git-p4 branches command that shows the mapping of perforce depot paths to imported git branches.
Signed-off-by: Simon Hausmann <simon@lst.de>
2007-06-20 23:13:20 +02:00
Simon Hausmann
1a2edf4e8d Warn about conflicting p4 branch mappings and use the first one found.
Signed-off-by: Simon Hausmann <simon@lst.de>
2007-06-17 15:10:24 +02:00
Simon Hausmann
6555b2ccfe Fix the branch mapping detection to be independent from the order of the "p4 branches" output.
Collect "unknown" source branches separately and register them at the end.

Also added a minor speed up to splitFilesIntoBranches by breaking out of the loop through all branches when it's safe.

Signed-off-by: Simon Hausmann <simon@lst.de>
2007-06-17 11:25:59 +02:00
Benjamin Sergeant
da4a660161 git-p4 fails when cloning a p4 depo.
A perforce command with all the files in the repo is generated to get
all the file content.
Here is a patch to break it into multiple successive perforce command
who uses 4K of parameter max, and collect the output for later.

It works, but not for big depos, because the whole perforce depo
content is stored in memory in P4Sync.run(), and it looks like mine is
bigger than 2 Gigs, so I had to kill the process.

[Simon: I added the bit about using SC_ARG_MAX, as suggested by Han-Wen]

Signed-off-by: Benjamin Sergeant <bsergean@gmail.com>
Signed-off-by: Simon Hausmann <simon@lst.de>
2007-06-16 22:06:06 +02:00
Simon Hausmann
3c699645f5 Fix initial multi-branch import.
The list of existing p4 branches in git wasn't initialized.

Signed-off-by: Simon Hausmann <shausman@trolltech.com>
2007-06-16 13:09:21 +02:00
Marius Storm-Olsen
cbae7080a7 Only use double quotes on Windows
Signed-off-by: Marius Storm-Olsen <mstormo_git@storm-olsen.com>
2007-06-12 15:27:52 +02:00
Simon Hausmann
d7e3868cdf Fix git-p4 rebase to detect the correct upstream branch instead of unconditionally
always rebasing on top of remotes/p4/master

Signed-off-by: Simon Hausmann <shausman@trolltech.com>
2007-06-12 14:34:46 +02:00
Simon Hausmann
27d2d8119b Moved the code from git-p4 submit to figure out the upstream branch point
into a separate helper method.

Signed-off-by: Simon Hausmann <shausman@trolltech.com>
2007-06-12 14:31:59 +02:00
Simon Hausmann
e6b711f00e git-p4 submit: Fix missing quotes around p4 commands to make them work with spaces in filenames
Noticed by Alex Riesen

Signed-off-by: Simon Hausmann <simon@lst.de>
2007-06-11 23:41:41 +02:00
Simon Hausmann
81b462a629 Mention remotes/p4/master also in the documentation.
Signed-off-by: Simon Hausmann <simon@lst.de>
2007-06-11 23:30:23 +02:00
Simon Hausmann
a9d1a27af1 Provide some information for single branch imports where the commits go
Signed-off-by: Simon Hausmann <simon@lst.de>
2007-06-11 23:28:03 +02:00
Kevin Green
c3bf3f1301 git-p4: check for existence of repo dir before trying to create
When using git-p4 in this manner:

git-p4 clone //depot/path/project myproject

If "myproject" already exists as a dir, but not a valid git repo, it fails
to create the directory.

Signed-off-by: Kevin Green <Kevin.Green@morganstanley.com>
2007-06-11 23:15:38 +02:00
Simon Hausmann
6581de096e Write out the options tag in the log message of imports only if we actually have
options

Signed-off-by: Simon Hausmann <simon@lst.de>
2007-06-11 10:01:58 +02:00
Simon Hausmann
a43ff00c7c Fix support for explicit disabling of syncing with the origin
Signed-off-by: Simon Hausmann <simon@lst.de>
2007-06-11 09:59:27 +02:00
Simon Hausmann
86fda6a327 Fix depot-paths encoding for multi-path imports (don't split up //depot/path/foo)
Signed-off-by: Simon Hausmann <simon@lst.de>
2007-06-11 08:54:45 +02:00
Simon Hausmann
6e5295c4d3 Fix project name guessing
Signed-off-by: Simon Hausmann <simon@lst.de>
2007-06-11 08:50:57 +02:00
Simon Hausmann
cae7b732d8 Fix updating/creating remotes/p4/* heads from origin/p4/*
Signed-off-by: Simon Hausmann <simon@lst.de>
2007-06-10 10:57:40 +02:00
Simon Hausmann
7aded26ce8 Fixed the check to make sure to exclude the HEAD symbolic refs when updating
the remotes/p4 branches from origin.

Signed-off-by: Simon Hausmann <simon@lst.de>
2007-06-10 00:22:30 +02:00
Han-Wen Nienhuys
5265bfcb06 also strip p4/ from local imports.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
2007-06-08 19:31:49 -03:00
Han-Wen Nienhuys
69d8cc8b99 Merge branch 'master' of git://repo.or.cz/fast-export 2007-06-08 18:19:23 -03:00
Han-Wen Nienhuys
1b9a46849a print error message when p4 print fails (eg. due to permission problems)
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
2007-06-08 18:19:16 -03:00
Simon Hausmann
df450923a2 Only get the expensive branch mapping from the p4 server when not
syncing with the help of an origin remote (which we instead then use
to get new branches from).

Signed-off-by: Simon Hausmann <simon@lst.de>
2007-06-08 08:49:22 +02:00
Simon Hausmann
a3fdd57901 Make git-p4 submit detect the correct reference (origin) branch when
working with multi-branch imports.

Signed-off-by: Simon Hausmann <simon@lst.de>
2007-06-07 22:54:32 +02:00
Simon Hausmann
5e100b5cd7 Make clone behave like git clone by default again.
Signed-off-by: Simon Hausmann <simon@lst.de>
2007-06-07 21:52:12 +02:00
Marius Storm-Olsen
c4b33253c2 Exclude the HEAD symbolic ref from the list of known branches
Signed-off-by: Marius Storm-Olsen <mstormo_git@storm-olsen.com>
2007-06-07 15:28:04 +02:00
Marius Storm-Olsen
db775559c2 Fix single branch import into remotes
Signed-off-by: Marius Storm-Olsen <mstormo_git@storm-olsen.com>
2007-06-07 15:13:59 +02:00
Marius Storm-Olsen
98ad4faf95 Fix git-p4 clone (defaultDestination)
Signed-off-by: Marius Storm-Olsen <mstormo_git@storm-olsen.com>
2007-06-07 15:08:33 +02:00
Marius Storm-Olsen
f7baba8b09 Ensure that the commit message is Windows formated (CRLF) before invoking the editor.
(The default editor on Windows (Notepad) doesn't handle Unix line endings)

Signed-off-by: Marius Storm-Olsen <marius@trolltech.com>
2007-06-07 14:11:15 +02:00
Simon Hausmann
a52d5c7bc0 Fix depot-path determination for git-p4 submit
Signed-off-by: Simon Hausmann <shausman@trolltech.com>
2007-06-07 13:10:20 +02:00
Simon Hausmann
b0d10df77a Fix git-p4 submit
Signed-off-by: Simon Hausmann <shausman@trolltech.com>
2007-06-07 13:09:14 +02:00
Simon Hausmann
68c4215306 Fix git-p4 rebase
Signed-off-by: Simon Hausmann <shausman@trolltech.com>
2007-06-07 12:51:03 +02:00
Simon Hausmann
6509e19cd1 Hack to make the multi-branch import work again with self.depotPaths now that
self.depotPath is gone

Signed-off-by: Simon Hausmann <shausman@trolltech.com>
2007-06-07 09:41:53 +02:00
Simon Hausmann
330f53b8d6 Don't attempt to set the initialParent on multi-branch imports (useless).
At some point the code paths should be unified, but for now I need a working
git-p4 :)

Signed-off-by: Simon Hausmann <shausman@trolltech.com>
2007-06-07 09:39:51 +02:00
Simon Hausmann
583e170706 Fix common path "calculation" from logs of multiple branches.
Need to use min instead of max for prev/cur to avoid out-of-bounds
string access. Also treat "i" as index of the last match instead of
a length because in case of a complete match of the two strings
i was off by one.

Signed-off-by: Simon Hausmann <shausman@trolltech.com>
2007-06-07 09:37:13 +02:00