The ls-tree documentation had never been updated after it learned to
interact with submodules to explicitly mention them. The initial
support was added in f35a6d3bce (Teach core object handling functions
about gitlinks, 2007-04-09). E.g. the discussion of --long added in
f35a6d3bce (Teach core object handling functions about gitlinks,
2007-04-09) didn't explicitly mention them.
But this documentation added in 455923e0a1 (ls-tree: introduce
"--format" option, 2022-03-23) had no such excuse, and was actively
misleading by providing an exhaustive but incomplete list of object
types we'd emit.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 455923e0a1 ("ls-tree: introduce "--format" option", 2022-03-23)
introduced `--format` and the various placeholders it can take, such as
%(objectname) and %(objectsize).
At some point when that patch was being developed, those placeholders
had shorter names, e.g., %(name) and %(size), which can be seen in the
commit message of 455923e0a1. One instance of "%(size:padded)" also
managed to enter the documentation in the final version of the patch.
Correct it to "%(objectsize:padded)".
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'--object-only' is an alias for '--format=%(objectname)'. It cannot
be used together other format-altering options like '--name-only',
'--long' or '--format', they are mutually exclusive.
The "--name-only" option outputs <filepath> only. Likewise, <objectName>
is another high frequency used field, so implement '--object-only' option
will bring intuitive and clear semantics for this scenario. Using
'--format=%(objectname)' we can achieve a similar effect, but the former
is with a lower learning cost(without knowing the format requirement
of '--format' option).
Even so, if a user is prefer to use "--format=%(objectname)", this is entirely
welcome because they are not only equivalent in function, but also have almost
identical performance. The reason is this commit also add the specific of
"--format=%(objectname)" to the current fast-pathes (builtin formats) to
avoid running unnecessary parsing mechanisms.
The following performance benchmarks are based on torvalds/linux.git:
When hit the fast-path:
Benchmark 1: /opt/git/ls-tree-oid-only/bin/git ls-tree -r --object-only HEAD
Time (mean ± σ): 83.6 ms ± 2.0 ms [User: 59.4 ms, System: 24.1 ms]
Range (min … max): 80.4 ms … 87.2 ms 35 runs
Benchmark 1: /opt/git/ls-tree-oid-only/bin/git ls-tree -r --format='%(objectname)' HEAD
Time (mean ± σ): 84.1 ms ± 1.8 ms [User: 61.7 ms, System: 22.3 ms]
Range (min … max): 80.9 ms … 87.5 ms 35 runs
But for a customized format, it will be slower:
Benchmark 1: /opt/git/ls-tree-oid-only/bin/git ls-tree -r --format='oid: %(objectname)' HEAD
Time (mean ± σ): 96.5 ms ± 2.5 ms [User: 72.9 ms, System: 23.5 ms]
Range (min … max): 93.1 ms … 104.1 ms 31 runs
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Teng Long <dyroneteng@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a --format option to ls-tree. It has an existing default output,
and then --long and --name-only options to emit the default output
along with the objectsize and, or to only emit object paths.
Rather than add --type-only, --object-only etc. we can just support a
--format using a strbuf_expand() similar to "for-each-ref
--format". We might still add such options in the future for
convenience.
The --format implementation is slower than the existing code, but this
change does not cause any performance regressions. We'll leave the
existing show_tree() unchanged, and only run show_tree_fmt() in if
a --format different than the hardcoded built-in ones corresponding to
the existing modes is provided.
I.e. something like the "--long" output would be much slower with
this, mainly due to how we need to allocate various things to do with
quote.c instead of spewing the output directly to stdout.
The new option of '--format' comes from Ævar Arnfjörð Bjarmasonn's
idea and suggestion, this commit makes modifications in terms of the
original discussion on community [1].
In [1] there was a "GIT_TEST_LS_TREE_FORMAT_BACKEND" variable to
ensure that we had test coverage for passing tests that would
otherwise use show_tree() through show_tree_fmt(), and thus that the
formatting mechanism could handle all the same cases as the
non-formatting options.
Somewhere in subsequent re-rolls of that we seem to have drifted away
from what the goal of these tests should be. We're trying to ensure
correctness of show_tree_fmt(). We can't tell if we "hit [the]
fast-path" here, and instead of having an explicit test for that, we
can just add it to something our "test_ls_tree_format" tests for.
Here is the statistics about performance tests:
1. Default format (hitten the builtin formats):
"git ls-tree <tree-ish>" vs "--format='%(mode) %(type) %(object)%x09%(file)'"
$hyperfine --warmup=10 "/opt/git/master/bin/git ls-tree -r HEAD"
Benchmark 1: /opt/git/master/bin/git ls-tree -r HEAD
Time (mean ± σ): 105.2 ms ± 3.3 ms [User: 84.3 ms, System: 20.8 ms]
Range (min … max): 99.2 ms … 113.2 ms 28 runs
$hyperfine --warmup=10 "/opt/git/ls-tree-oid-only/bin/git ls-tree -r --format='%(mode) %(type) %(object)%x09%(file)' HEAD"
Benchmark 1: /opt/git/ls-tree-oid-only/bin/git ls-tree -r --format='%(mode) %(type) %(object)%x09%(file)' HEAD
Time (mean ± σ): 106.4 ms ± 2.7 ms [User: 86.1 ms, System: 20.2 ms]
Range (min … max): 100.2 ms … 110.5 ms 29 runs
2. Default format includes object size (hitten the builtin formats):
"git ls-tree -l <tree-ish>" vs "--format='%(mode) %(type) %(object) %(size:padded)%x09%(file)'"
$hyperfine --warmup=10 "/opt/git/master/bin/git ls-tree -r -l HEAD"
Benchmark 1: /opt/git/master/bin/git ls-tree -r -l HEAD
Time (mean ± σ): 335.1 ms ± 6.5 ms [User: 304.6 ms, System: 30.4 ms]
Range (min … max): 327.5 ms … 348.4 ms 10 runs
$hyperfine --warmup=10 "/opt/git/ls-tree-oid-only/bin/git ls-tree -r --format='%(mode) %(type) %(object) %(size:padded)%x09%(file)' HEAD"
Benchmark 1: /opt/git/ls-tree-oid-only/bin/git ls-tree -r --format='%(mode) %(type) %(object) %(size:padded)%x09%(file)' HEAD
Time (mean ± σ): 337.2 ms ± 8.2 ms [User: 309.2 ms, System: 27.9 ms]
Range (min … max): 328.8 ms … 349.4 ms 10 runs
Links:
[1] https://public-inbox.org/git/RFC-patch-6.7-eac299f06ff-20211217T131635Z-avarab@gmail.com/
[2] https://lore.kernel.org/git/cb717d08be87e3239117c6c667cb32caabaad33d.1646390152.git.dyroneteng@gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Teng Long <dyroneteng@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we added a new event type to trace2 event stream, we forgot to
raise the format version number, which has been corrected.
* js/trace2-raise-format-version:
trace2: increment event format version
In 64bc752 (trace2: add trace2_child_ready() to report on background
children, 2021-09-20), we added a new "child_ready" event. In
Documentation/technical/api-trace2.txt, we promise that adding a new
event type will result in incrementing the trace2 event format version
number, but this was not done. Correct this in code & docs.
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit f45022dc2f,
as this is like breakage in the traversal more likely. In a
history with 10 single strand of pearls,
1-->2-->3--...->7-->8-->9-->10
asking "rev-list --unsorted-input 1 10 --not 9 8 7 6 5 4" fails to
paint the bottom 1 uninteresting as the traversal stops, without
completing the propagation of uninteresting bit starting at 4 down
through 3 and 2 to 1.
"git log --grep=string --author=name" learns to highlight hits just
like "git grep string" does.
* hm/paint-hits-in-log-grep:
grep/pcre2: fix an edge case concerning ascii patterns and UTF-8 data
pretty: colorize pattern matches in commit messages
grep: refactor next_match() and match_one_pattern() for external use
"git branch -c/-m new old" was not described to copy config, which
has been corrected.
* jc/branch-copy-doc:
branch (doc): -m/-c copies config and reflog
Consistently use 'directory', not 'folder', to call the filesystem
entity that collects a group of files and, eh, directories.
* ma/doc-folder-to-directory:
gitweb.txt: change "folder" to "directory"
gitignore.txt: change "folder" to "directory"
git-multi-pack-index.txt: change "folder" to "directory"
Update "git archive" documentation and give explicit mention on the
compression level for both zip and tar.gz format.
* bs/archive-doc-compression-level:
archive: describe compression level option
We already note that we may produce invalid output when we skip calling
iconv() altogether. But we may also do so if iconv() fails, and we have
no good alternative. Let's document this to avoid surprising users.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit fd680bc5 (logmsg_reencode(): warn when iconv()
fails, 2021-08-27). Throwing a warning for each and every commit
that gets reencoded, without allowing a way to squelch, would make
it unpleasant for folks who have to deal with an ancient part of the
history in an old project that used wrong encoding in the commits.
This documents "--verify" option of the commands. It can be used to re-enable
the hooks disabled by an earlier "--no-verify" in command-line.
Signed-off-by: Alexander Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add an "and" to separate the two halves of the first sentence of the
paragraph more. Add a comma to similarly separate the two halves of the
second sentence a bit better. Add a period at the end of the paragraph.
Further down in the file, add the missing "be" in "must be accompanied".
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 8650c6298c (doc lint: make "lint-docs" non-.PHONY, 2021-10-15), we
put the output for gitlink linter into .build/lint-docs/gitlink. There
are order-only dependencies to create the sequence of subdirs like:
.build/lint-docs: | .build
$(QUIET)mkdir $@
.build/lint-docs/gitlink: | .build/lint-docs
$(QUIET)mkdir $@
where each level has to depend on the prior one (since the parent
directory must exist for us to create something inside it). But the
"howto" and "config" subdirectories of gitlink have the wrong
dependency; they depend on "lint-docs", not "lint-docs/gitlink".
This usually works out, because the LINT_DOCS_GITLINK targets which
depend on "gitlink/howto" also depend on just "gitlink", so the
directory gets created anyway. But since we haven't given make an
explicit ordering, things can racily happen out of order.
If you stick a "sleep 1" in the rule to build "gitlink" like this:
## Lint: gitlink
.build/lint-docs/gitlink: | .build/lint-docs
- $(QUIET)mkdir $@
+ $(QUIET)sleep 1 && mkdir $@
then "make clean; make lint-docs" will fail reliably. Or you can see it
as-is just by building the directory in isolation:
$ make clean
[...]
$ make .build/lint-docs/gitlink/howto
GEN mergetools-list.made
GEN cmd-list.made
GEN doc.dep
SUBDIR ../
make[1]: 'GIT-VERSION-FILE' is up to date.
SUBDIR ../
make[1]: 'GIT-VERSION-FILE' is up to date.
mkdir: cannot create directory ‘.build/lint-docs/gitlink/howto’: No such file or directory
make: *** [Makefile:476: .build/lint-docs/gitlink/howto] Error 1
The fix is easy: we just need to depend on the correct parent directory.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix-up for the other topic already in 'next'.
* fs/ssh-signing-fix:
gpg-interface: fix leak of strbufs in get_ssh_key_fingerprint()
gpg-interface: fix leak of "line" in parse_ssh_output()
ssh signing: clarify trustlevel usage in docs
ssh signing: fmt-merge-msg tests & config parse
Use ssh public crypto for object and push-cert signing.
* fs/ssh-signing:
ssh signing: test that gpg fails for unknown keys
ssh signing: tests for logs, tags & push certs
ssh signing: duplicate t7510 tests for commits
ssh signing: verify signatures using ssh-keygen
ssh signing: provide a textual signing_key_id
ssh signing: retrieve a default key from ssh-agent
ssh signing: add ssh key format and signing code
ssh signing: add test prereqs
ssh signing: preliminary refactoring and clean-up
We prefer "directory" over "folder" when discussing the file system
concept. Change this instance for consistency.
After this, the only hits for '\<folder\>' in Documentation/ relate to
IMAP folders.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We prefer "directory" over "folder" when discussing the file system
concept. Change this instance for consistency -- indeed, even within
this paragraph, we already use "directory".
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We prefer "directory" over "folder" when discussing the file system
concept. In all of our documentation, these are the only spots where we
refer to the `.git` directory as a folder. Switch to "directory", and
while doing so, add backticks to the ".git" filename to set it in
monospace.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Describe the only <extra> option in `git archive`, that is the compression
level option. Previously this option is only described for zip backend;
add description also for tar backend.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The description section for the command mentions config and reflog
are moved or copied by these options, but the description for these
options did not. Make them match.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
What --base=auto tells format-patch is to compute the base commit
itself, using the tracking information. It does not make anything
track anything.
Tighten the phrasing so that it won't be copied and pasted to other
places.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a regression in 8c32856133 (blame: document --color-* options,
2021-10-08), which added an extra newline before the "+" syntax.
The "Documentation/doc-diff HEAD~ HEAD" output with this applied is:
[...]
@@ -1815,13 +1815,13 @@ CONFIGURATION FILE
specified colors if the line was introduced before the given
timestamp, overwriting older timestamped colors.
- + Instead of an absolute timestamp relative timestamps work as well,
- e.g. 2.weeks.ago is valid to address anything older than 2 weeks.
+ Instead of an absolute timestamp relative timestamps work as well,
+ e.g. 2.weeks.ago is valid to address anything older than 2 weeks.
- + It defaults to blue,12 month ago,white,1 month ago,red, which colors
- everything older than one year blue, recent changes between one month
- and one year old are kept white, and lines introduced within the last
- month are colored red.
+ It defaults to blue,12 month ago,white,1 month ago,red, which
+ colors everything older than one year blue, recent changes between
+ one month and one year old are kept white, and lines introduced
+ within the last month are colored red.
color.blame.repeatedLines
Use the specified color to colorize line annotations for git blame
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "--color-lines" and "--color-by-age" options of "git blame"
have been missing, which are now documented.
* bs/doc-blame-color-lines:
blame: document --color-* options
blame: describe default output format
"git cat-file --batch" with the "--batch-all-objects" option is
supposed to iterate over all the objects found in a repository, but
it used to translate these object names using the replace mechanism,
which defeats the point of enumerating all objects in the repository.
This has been corrected.
* jk/cat-file-batch-all-wo-replace:
cat-file: use packed_object_info() for --batch-all-objects
cat-file: split ordered/unordered batch-all-objects callbacks
cat-file: disable refs/replace with --batch-all-objects
cat-file: mention --unordered along with --batch-all-objects
t1006: clean up broken objects
"git repack" has been taught to generate multi-pack reachability
bitmaps.
* tb/repack-write-midx:
test-read-midx: fix leak of bitmap_index struct
builtin/repack.c: pass `--refs-snapshot` when writing bitmaps
builtin/repack.c: make largest pack preferred
builtin/repack.c: support writing a MIDX while repacking
builtin/repack.c: extract showing progress to a variable
builtin/repack.c: rename variables that deal with non-kept packs
builtin/repack.c: keep track of existing packs unconditionally
midx: preliminary support for `--refs-snapshot`
builtin/multi-pack-index.c: support `--stdin-packs` mode
midx: expose `write_midx_file_only()` publicly
