When commit subjects or authors have non-ASCII characters, git
format-patch Q-encodes them so they can be safely sent over email.
However, if the patch transfer method is something other than email (web
review tools, sneakernet), this only serves to make the patch metadata
harder to read without first applying it (unless you can decode RFC 2047
in your head). git am as well as some email software supports
non-Q-encoded mail as described in RFC 6531.
Add --[no-]encode-email-headers and format.encodeEmailHeaders to let the
user control this behavior.
Signed-off-by: Emma Brooks <me@pluvano.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The option name "--use-mailmap" looks OK, but it becomes awkward
when you have to negate it, i.e. "--no-use-mailmap". I, perhaps
with many other users, always try "--no-mailmap" and become unhappy
to see it fail.
Add an alias "--[no-]mailmap" to remedy this.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git format-patch" can take a set of configured format.notes values
to specify which notes refs to use in the log message part of the
output. The behaviour of this was not consistent with multiple
--notes command line options, which has been corrected.
* dl/format-patch-notes-config-fixup:
notes.h: fix typos in comment
notes: break set_display_notes() into smaller functions
config/format.txt: clarify behavior of multiple format.notes
format-patch: move git_config() before repo_init_revisions()
format-patch: use --notes behavior for format.notes
notes: extract logic into set_display_notes()
notes: create init_display_notes() helper
notes: rename to load_display_notes()
"git rebase" did not work well when format.useAutoBase
configuration variable is set, which has been corrected.
* dl/rebase-with-autobase:
rebase: fix format.useAutoBase breakage
format-patch: teach --no-base
t4014: use test_config()
format-patch: fix indentation
t3400: demonstrate failure with format.useAutoBase
In 8164c961e1 (format-patch: use --notes behavior for format.notes,
2019-12-09), we introduced set_display_notes() which was a monolithic
function with three mutually exclusive branches. Break the function up
into three small and simple functions that each are only responsible for
one task.
This family of functions accepts an `int *show_notes` instead of
returning a value suitable for assignment to `show_notes`. This is for
two reasons. First of all, this guarantees that the external
`show_notes` variable changes in lockstep with the
`struct display_notes_opt`. Second, this prompts future developers to be
careful about doing something meaningful with this value. In fact, a
NULL check is intentionally omitted because causing a segfault here
would tell the future developer that they are meant to use the value for
something meaningful.
One alternative was making the family of functions accept a
`struct rev_info *` instead of the `struct display_notes_opt *`, since
the former contains the `show_notes` field as well. This does not work
because we have to call git_config() before repo_init_revisions().
However, if we had a `struct rev_info`, we'd need to initialize it before
it gets assigned values from git_config(). As a result, we break the
circular dependency by having standalone `int show_notes` and
`struct display_notes_opt notes_opt` variables which temporarily hold
values from git_config() until the values are copied over to `rev`.
To implement this change, we need to get a pointer to
`rev_info::show_notes`. Unfortunately, this is not possible with
bitfields and only direct-assignment is possible. Change
`rev_info::show_notes` to a non-bitfield int so that we can get its
address.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 13cdf78094 (format-patch: teach format.notes config option,
2019-05-16), the order in which git_config() and repo_init_revisions()
were swapped so that `rev.notes_opt` would be initialized before
git_config() was called. This is problematic, however, as git_config()
should generally be called before repo_init_revisions().
Break this circular dependency by creating `show_notes` and `notes_opt`
which git_config() reads into. Then, copy these values over to
`rev.show_notes` and `rev.notes_opt` after repo_init_revisions() is
called.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we had multiple `format.notes` config values where we had `<ref1>`,
`false`, `<ref2>` (in that order), then we would print out the notes for
both `<ref1>` and `<ref2>`. This doesn't make sense, however, since we
parse the config in a top-down manner and a `false` should be able to
override previous configurations, just like how `--no-notes` will
override previous `--notes`.
Duplicate the logic that handles the `--[no-]notes[=]` option to
`format.notes` for consistency. As a result, when parsing the config
from top to bottom, `format.notes = true` will behave like `--notes`,
`format.notes = <ref>` will behave like `--notes=<ref>` and
`format.notes = false` will behave like `--no-notes`.
This change isn't strictly backwards compatible but since it is an edge
case where a sane user would not mix notes refs with `false` and this
feature is relatively new (released only in v2.23.0), this change should
be harmless.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
According to the function comment, init_display_notes() was supposed to
"Load the notes machinery for displaying several notes trees." Rename
this function to load_display_notes() so that its use is more accurately
represented.
This is done because, in a future commit, we will reuse the name
init_display_notes().
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If `format.useAutoBase = true`, there was no way to override this from
the command-line. Teach the `--no-base` option in format-patch to
override `format.useAutoBase`.
Helped-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since format-patch accepts `--[no-]notes`, one would expect the
range-diff generated to also respect the setting. Unfortunately, the
range-diff we currently generate only uses the default option (which
always outputs default notes, even when notes are not being used
elsewhere).
Pass the notes configuration to range-diff so that it can honor it.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a commit being range-diff'd has a note attached to it, the note
will be compared as well. However, if a user has multiple notes refs or
if they want to suppress notes from being printed, there is currently no
way to do this.
Pass through `--[no-]notes[=<ref>]` to the `git log` call so that this
option is customizable.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The branch description ("git branch --edit-description") has been
used to fill the body of the cover letters by the format-patch
command; this has been enhanced so that the subject can also be
filled.
* dl/format-patch-cover-from-desc:
format-patch: teach --cover-from-description option
format-patch: use enum variables
format-patch: replace erroneous and condition
"git format-patch -o <outdir>" did an equivalent of "mkdir <outdir>"
not "mkdir -p <outdir>", which is being corrected.
* bw/format-patch-o-create-leading-dirs:
format-patch: create leading components of output directory
Before, when format-patch generated a cover letter, only the body would
be populated with a branch's description while the subject would be
populated with placeholder text. However, users may want to have the
subject of their cover letter automatically populated in the same way.
Teach format-patch to accept the `--cover-from-description` option and
corresponding `format.coverFromDescription` config, allowing users to
populate different parts of the cover letter (including the subject
now).
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before, `thread` and `config_cover_letter` were defined as ints even
though they behaved as enums. Define actual enums and change these
variables to use these new definitions.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 30984ed2e9 (format-patch: support deep threading, 2009-02-19),
introduced the following lines:
#define THREAD_SHALLOW 1
[...]
thread = git_config_bool(var, value) && THREAD_SHALLOW;
Since git_config_bool() returns a bool, the trailing `&& THREAD_SHALLOW`
is a no-op. Replace this errorneous and condition with a ternary
statement so that it is clear what the configured value is when a
boolean is given.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git format-patch -o <outdir>' did an equivalent of 'mkdir <outdir>'
not 'mkdir -p <outdir>', which is being corrected.
Avoid the usage of 'adjust_shared_perm' on the leading directories which
may have security implications. Achieved by temporarily disabling of
'config.sharedRepository' like 'git init' does.
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Avoid derefencing ->tagged without checking for NULL by using the
convenience wrapper for getting the ID of the tagged object. It die()s
when encountering a broken tag instead of segfaulting.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the docs, test the interaction between the new default,
configuration and command line option, in addition to actually
flipping the default.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It turns out that being cautious to warn against upcoming default
change was an unpopular behaviour, and such a care can easily be
defeated by distro packagers to render it ineffective anyway.
Just flip the default, with only a mention in the release notes.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Based on discussions around changing the log.mailmap default to being
enabled, it was decided that a transitional period is required.
Accordingly, we announce this transitional period with a warning
message.
Signed-off-by: Ariadne Conill <ariadne@dereferenced.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git format-patch" learns a configuration to set the default for
its --notes=<ref> option.
* dl/format-patch-notes-config:
format-patch: teach format.notes config option
git-format-patch.txt: document --no-notes option
In git-format-patch, notes can be appended with the `--notes` option.
However, this must be specified by the user on an
invocation-by-invocation basis. If a user is not careful, it's possible
that they may forget to include it and generate a patch series without
notes.
Teach git-format-patch the `format.notes` config option. Its value is a
notes ref that will be automatically appended. The special value of
"standard" can be used to specify the standard notes. This option is
overridable with the `--no-notes` option in case a user wishes not to
append notes.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We weren't flushing the context each time we processed a hunk in the
patch-id generation code in diff.c, but we were doing that when we
generated "stable" patch-ids with the 'patch-id' tool. Let's port that
similar logic over from patch-id.c into diff.c so we can get the same
hash when we're generating patch-ids for 'format-patch --base=' types of
command invocations.
Cc: Xiaolong Ye <xiaolong.ye@intel.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code cleanup.
* jk/unused-params-even-more:
parse_opt_ref_sorting: always use with NONEG flag
pretty: drop unused strbuf from parse_padding_placeholder()
pretty: drop unused "type" parameter in needs_rfc2047_encoding()
parse-options: drop unused ctx parameter from show_gitcomp()
fetch_pack(): drop unused parameters
report_path_error(): drop unused prefix parameter
unpack-trees: drop unused error_type parameters
unpack-trees: drop name_entry from traverse_by_cache_tree()
test-date: drop unused "now" parameter from parse_dates()
update-index: drop unused prefix_length parameter from do_reupdate()
log: drop unused "len" from show_tagger()
log: drop unused rev_info from early output
revision: drop some unused "revs" parameters
"git format-patch" used overwrite an existing patch/cover-letter
file. A new "--no-clobber" option stops it.
* jc/format-patch-error-check:
format-patch: notice failure to open cover letter for writing
builtin/log: downcase the beginning of error messages
We pass the length of the found "tagger" line to show_tagger(), but it
does not use it; instead, it passes the string to pp_user_info(), which
reads until newline or NUL. This is OK for our purposes because we
always read the object contents into a buffer with an extra NUL (and
indeed, our sole caller already relies on this by using starts_with).
Let's drop the ignored parameter. And while we're touching the caller,
let's use skip_prefix() to avoid a magic number.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The early output code passes around a rev_info struct but doesn't need
it. The setup step only turns on global signal handlers, and the
"estimate" step is done completely from the rev->commits list that is
passed in separately.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The make_cover_letter() function is supposed to open a new file for
writing, and let the caller write into it via FILE *rev->diffopt.file
but because the function does not return anything, the caller does not
bother checking the return value.
Make sure it dies, instead of keep going with a NULL output
filestream and relying on it to cause a crash, when it fails to
open the file.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds value completion for a couple more paramters. To make it
easier to maintain these hard coded lists, add a comment at the original
list/code to remind people to update git-completion.bash too.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The assumption to work on the single "in-core index" instance has
been reduced from the library-ish part of the codebase.
* nd/the-index-final:
cache.h: flip NO_THE_INDEX_COMPATIBILITY_MACROS switch
read-cache.c: remove the_* from index_has_changes()
merge-recursive.c: remove implicit dependency on the_repository
merge-recursive.c: remove implicit dependency on the_index
sha1-name.c: remove implicit dependency on the_index
read-cache.c: replace update_index_if_able with repo_&
read-cache.c: kill read_index()
checkout: avoid the_index when possible
repository.c: replace hold_locked_index() with repo_hold_locked_index()
notes-utils.c: remove the_repository references
grep: use grep_opt->repo instead of explict repo argument
The in-core repository instances are passed through more codepaths.
* sb/more-repo-in-api: (23 commits)
t/helper/test-repository: celebrate independence from the_repository
path.h: make REPO_GIT_PATH_FUNC repository agnostic
commit: prepare free_commit_buffer and release_commit_memory for any repo
commit-graph: convert remaining functions to handle any repo
submodule: don't add submodule as odb for push
submodule: use submodule repos for object lookup
pretty: prepare format_commit_message to handle arbitrary repositories
commit: prepare logmsg_reencode to handle arbitrary repositories
commit: prepare repo_unuse_commit_buffer to handle any repo
commit: prepare get_commit_buffer to handle any repo
commit-reach: prepare in_merge_bases[_many] to handle any repo
commit-reach: prepare get_merge_bases to handle any repo
commit-reach.c: allow get_merge_bases_many_0 to handle any repo
commit-reach.c: allow remove_redundant to handle any repo
commit-reach.c: allow merge_bases_many to handle any repo
commit-reach.c: allow paint_down_to_common to handle any repo
commit: allow parse_commit* to handle any repo
object: parse_object to honor its repository argument
object-store: prepare has_{sha1, object}_file to handle any repo
object-store: prepare read_object_file to deal with any repo
...
Custom userformat "log --format" learned %S atom that stands for
the tip the traversal reached the commit from, i.e. --source.
* it/log-format-source:
log: add %S option (like --source) to log --format
By default, index compat macros are off from now on, because they
could hide the_index dependency.
Only those in builtin can use it.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The traversal over tree objects has learned to honor
":(attr:label)" pathspec match, which has been implemented only for
enumerating paths on the filesystem.
* nd/attr-pathspec-in-tree-walk:
tree-walk: support :(attr) matching
dir.c: move, rename and export match_attrs()
pathspec.h: clean up "extern" in function declarations
tree-walk.c: make tree_entry_interesting() take an index
tree.c: make read_tree*() take 'struct repository *'
This kills the_index dependency in get_oid_with_context() but for
get_oid() and friends, they still assume the_repository (which also
means the_index).
Unfortunately the widespread use of get_oid() will make it hard to
make the conversion now. We probably will add repo_get_oid() at some
point and limit the use of get_oid() in builtin/ instead of forcing
all get_oid() call sites to carry struct repository.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make it possible to write for example
git log --format="%H,%S"
where the %S at the end is a new placeholder that prints out the ref
(tag/branch) for each commit.
Using %d might seem like an alternative but it only shows the ref for the last
commit in the branch.
Signed-off-by: Issac Trotts <issactrotts@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pass the object pool to free_commit_buffer and release_commit_memory,
such that we can eliminate access to 'the_repository'.
Also remove the TODO in release_commit_memory, as commit->util was
removed in 9d2c97016f (commit.h: delete 'util' field in struct commit,
2018-05-19)
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit d8981c3f88 ("format-patch: do not let its diff-options affect
--range-diff", 2018-11-30) taught `show_range_diff()` to accept a
NULL-pointer as an indication that it should use its own "reasonable
default". That fixed a regression from a5170794 ("Merge branch
'ab/range-diff-no-patch'", 2018-11-18), but unfortunately it introduced
a regression of its own.
In particular, it means we forget the `file` member of the diff options,
so rather than placing a range-diff in the cover-letter, we write it to
stdout. In order to fix this, rewrite the two callers adjusted by
d8981c3f88 to instead create a "dummy" set of diff options where they
only fill in the fields we absolutely require, such as output file and
color.
Modify and extend the existing tests to try and verify that the right
contents end up in the right place.
Don't revert `show_range_diff()`, i.e., let it keep accepting NULL.
Rather than removing what is dead code and figuring out it isn't
actually dead and we've broken 2.20, just leave it for now.
[es: retain diff coloring when going to stdout]
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stop leaking how the primary output of format-patch is customized to
the range-diff machinery and instead let the latter use its own
"reasonable default", in order to correct the breakage introduced by
a5170794 ("Merge branch 'ab/range-diff-no-patch'", 2018-11-18) on
the 'master' front. "git format-patch --range-diff..." without any
weird diff option started to include the "range-diff --stat" output,
which is rather useless right now, that made the whole thing
unusable and this is probably the least disruptive way to whip the
codebase into a shippable shape.
We may want to later make the range-diff driven by format-patch more
configurable, but that would have to wait until we have a good
design.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git format-patch --stat=<width>" can be used to specify the width
used by the diffstat (shown in the cover letter).
* nd/format-patch-cover-letter-stat-width:
format-patch: respect --stat in cover letter's diffstat
These functions call tree_entry_interesting() which will soon require
a 'struct index_state *' to be passed in. Instead of just changing the
function signature to take an index, update to take a repo instead
because these functions do need object database access.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 43662b23ab (format-patch: keep cover-letter diffstat wrapped in
72 columns - 2018-01-24) uncondtionally sets stat width to 72 when
generating diffstat for the cover letter, ignoring --stat from command
line. But it should only do so when stat width is still default
(i.e. stat_width == 0).
In order to fix this, we should only set stat_width if stat_width is
zero. But it will never be. Commit 071dd0ba43 (format-patch: reduce
patch diffstat width to 72 - 2018-02-01) makes sure that default stat
width will be 72 (ignoring $COLUMNS, but could still be overriden by
--stat). So all we need to do here is drop the assignment.
Reported-by: Laszlo Ersek <lersek@redhat.com>
Helped-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we define a parse-options callback, the flags we put in the option
struct must match what the callback expects. For example, a callback
which does not handle the "unset" parameter should only be used with
PARSE_OPT_NONEG. But since the callback and the option struct are not
defined next to each other, it's easy to get this wrong (as earlier
patches in this series show).
Fortunately, the compiler can help us here: compiling with
-Wunused-parameters can show us which callbacks ignore their "unset"
parameters (and likewise, ones that ignore "arg" expect to be triggered
with PARSE_OPT_NOARG).
But after we've inspected a callback and determined that all of its
callers use the right flags, what do we do next? We'd like to silence
the compiler warning, but do so in a way that will catch any wrong calls
in the future.
We can do that by actually checking those variables and asserting that
they match our expectations. Because this is such a common pattern,
we'll introduce some helper macros. The resulting messages aren't
as descriptive as we could make them, but the file/line information from
BUG() is enough to identify the problem (and anyway, the point is that
these should never be seen).
Each of the annotated callbacks in this patch triggers
-Wunused-parameters, and was manually inspected to make sure all callers
use the correct options (so none of these BUGs should be triggerable).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have separate parse-options entries for "numbered" and "no-numbered",
which means that we accept "--no-no-numbered". It does not behave
sensibly, though (it ignores the "unset" flag and acts like
"--no-numbered").
We could fix that, but obviously this is silly and unintentional. Let's
just disallow it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Various codepaths in the core-ish part learn to work on an
arbitrary in-core index structure, not necessarily the default
instance "the_index".
* nd/the-index: (23 commits)
revision.c: reduce implicit dependency the_repository
revision.c: remove implicit dependency on the_index
ws.c: remove implicit dependency on the_index
tree-diff.c: remove implicit dependency on the_index
submodule.c: remove implicit dependency on the_index
line-range.c: remove implicit dependency on the_index
userdiff.c: remove implicit dependency on the_index
rerere.c: remove implicit dependency on the_index
sha1-file.c: remove implicit dependency on the_index
patch-ids.c: remove implicit dependency on the_index
merge.c: remove implicit dependency on the_index
merge-blobs.c: remove implicit dependency on the_index
ll-merge.c: remove implicit dependency on the_index
diff-lib.c: remove implicit dependency on the_index
read-cache.c: remove implicit dependency on the_index
diff.c: remove implicit dependency on the_index
grep.c: remove implicit dependency on the_index
diff.c: remove the_index dependency in textconv() functions
blame.c: rename "repo" argument to "r"
combine-diff.c: remove implicit dependency on the_index
...
A new variant repo_diff_setup() is added that takes 'struct repository *'
and diff_setup() becomes a thin macro around it that is protected by
NO_THE_REPOSITORY_COMPATIBILITY_MACROS, similar to NO_THE_INDEX_....
The plan is these macros will always be defined for all library files
and the macros are only accessible in builtin/
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
spatch transformation to replace boolean uses of !hashcmp() to
newly introduced oideq() is added, and applied, to regain
performance lost due to support of multiple hash algorithms.
* jk/cocci:
show_dirstat: simplify same-content check
read-cache: use oideq() in ce_compare functions
convert hashmap comparison functions to oideq()
convert "hashcmp() != 0" to "!hasheq()"
convert "oidcmp() != 0" to "!oideq()"
convert "hashcmp() == 0" to hasheq()
convert "oidcmp() == 0" to oideq()
introduce hasheq() and oideq()
coccinelle: use <...> for function exclusion
"git format-patch" learned a new "--range-diff" option to explain
the difference between this version and the previous attempt in
the cover letter (or after the tree-dashes as a comment).
* es/format-patch-rangediff:
format-patch: allow --range-diff to apply to a lone-patch
format-patch: add --creation-factor tweak for --range-diff
format-patch: teach --range-diff to respect -v/--reroll-count
format-patch: extend --range-diff to accept revision range
format-patch: add --range-diff option to embed diff in cover letter
range-diff: relieve callers of low-level configuration burden
range-diff: publish default creation factor
range-diff: respect diff_option.file rather than assuming 'stdout'
"git format-patch" learned a new "--interdiff" option to explain
the difference between this version and the previous atttempt in
the cover letter (or after the tree-dashes as a comment).
* es/format-patch-interdiff:
format-patch: allow --interdiff to apply to a lone-patch
log-tree: show_log: make commentary block delimiting reusable
interdiff: teach show_interdiff() to indent interdiff
format-patch: teach --interdiff to respect -v/--reroll-count
format-patch: add --interdiff option to embed diff in cover letter
format-patch: allow additional generated content in make_cover_letter()
The code for computing history reachability has been shuffled,
obtained a bunch of new tests to cover them, and then being
improved.
* ds/reachable:
commit-reach: correct accidental #include of C file
commit-reach: use can_all_from_reach
commit-reach: make can_all_from_reach... linear
commit-reach: replace ref_newer logic
test-reach: test commit_contains
test-reach: test can_all_from_reach_with_flags
test-reach: test reduce_heads
test-reach: test get_merge_bases_many
test-reach: test is_descendant_of
test-reach: test in_merge_bases
test-reach: create new test tool for ref_newer
commit-reach: move can_all_from_reach_with_flags
upload-pack: generalize commit date cutoff
upload-pack: refactor ok_to_give_up()
upload-pack: make reachable() more generic
commit-reach: move commit_contains from ref-filter
commit-reach: move ref_newer from remote.c
commit.h: remove method declarations
commit-reach: move walk methods from commit.c
Using the more restrictive oideq() should, in the long run,
give the compiler more opportunities to optimize these
callsites. For now, this conversion should be a complete
noop with respect to the generated code.
The result is also perhaps a little more readable, as it
avoids the "zero is equal" idiom. Since it's so prevalent in
C, I think seasoned programmers tend not to even notice it
anymore, but it can sometimes make for awkward double
negations (e.g., we can drop a few !!oidcmp() instances
here).
This patch was generated almost entirely by the included
coccinelle patch. This mechanical conversion should be
completely safe, because we check explicitly for cases where
oidcmp() is compared to 0, which is what oideq() is doing
under the hood. Note that we don't have to catch "!oidcmp()"
separately; coccinelle's standard isomorphisms make sure the
two are treated equivalently.
I say "almost" because I did hand-edit the coccinelle output
to fix up a few style violations (it mostly keeps the
original formatting, but sometimes unwraps long lines).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many more strings are prepared for l10n.
* nd/i18n: (23 commits)
transport-helper.c: mark more strings for translation
transport.c: mark more strings for translation
sha1-file.c: mark more strings for translation
sequencer.c: mark more strings for translation
replace-object.c: mark more strings for translation
refspec.c: mark more strings for translation
refs.c: mark more strings for translation
pkt-line.c: mark more strings for translation
object.c: mark more strings for translation
exec-cmd.c: mark more strings for translation
environment.c: mark more strings for translation
dir.c: mark more strings for translation
convert.c: mark more strings for translation
connect.c: mark more strings for translation
config.c: mark more strings for translation
commit-graph.c: mark more strings for translation
builtin/replace.c: mark more strings for translation
builtin/pack-objects.c: mark more strings for translation
builtin/grep.c: mark strings for translation
builtin/config.c: mark more strings for translation
...
When submitting a revised version of a patch or series, it can be
helpful (to reviewers) to include a summary of changes since the
previous attempt in the form of a range-diff, typically in the cover
letter. However, it is occasionally useful, despite making for a noisy
read, to insert a range-diff into the commentary section of the lone
patch of a 1-patch series.
Therefore, extend "git format-patch --range-diff=<refspec>" to insert a
range-diff into the commentary section of a lone patch rather than
requiring a cover letter.
Implementation note: Generating a range-diff for insertion into the
commentary section of a patch which itself is currently being generated
requires invoking the diffing machinery recursively. However, the
machinery does not (presently) support this since it uses global state.
Consequently, we need to take care to stash away the state of the
in-progress operation while generating the range-diff, and restore it
after.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When generating a range-diff, matching up commits between two version of
a patch series involves heuristics, thus may give unexpected results.
git-range-diff allows tweaking the heuristic via --creation-factor.
Follow suit by accepting --creation-factor in combination with
--range-diff when generating a range-diff for a cover-letter.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --range-diff option announces the embedded range-diff generically
as "Range-diff:", however, we can do better when --reroll-count is
specified by emitting "Range-diff against v{n}:" instead.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When submitting a revised a patch series, the --range-diff option embeds
a range-diff in the cover letter showing changes since the previous
version of the patch series. The argument to --range-diff is a simple
revision naming the tip of the previous series, which works fine if the
previous and current versions of the patch series share a common base.
However, it fails if the revision ranges of the old and new versions of
the series are disjoint. To address this shortcoming, extend
--range-diff to also accept an explicit revision range for the previous
series. For example:
git format-patch --cover-letter --range-diff=v1~3..v1 -3 v2
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When submitting a revised version of a patch series, it can be helpful
(to reviewers) to include a summary of changes since the previous
attempt in the form of a range-diff, however, doing so involves manually
copy/pasting the diff into the cover letter.
Add a --range-diff option to automate this process. The argument to
--range-diff specifies the tip of the previous attempt against which to
generate the range-diff. For example:
git format-patch --cover-letter --range-diff=v1 -3 v2
(At this stage, the previous attempt and the patch series being
formatted must share a common base, however, a subsequent enhancement
will make it possible to specify an explicit revision range for the
previous attempt.)
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* es/format-patch-interdiff:
format-patch: allow --interdiff to apply to a lone-patch
log-tree: show_log: make commentary block delimiting reusable
interdiff: teach show_interdiff() to indent interdiff
format-patch: teach --interdiff to respect -v/--reroll-count
format-patch: add --interdiff option to embed diff in cover letter
format-patch: allow additional generated content in make_cover_letter()
When submitting a revised version of a patch or series, it can be
helpful (to reviewers) to include a summary of changes since the
previous attempt in the form of an interdiff, typically in the cover
letter. However, it is occasionally useful, despite making for a noisy
read, to insert an interdiff into the commentary section of the lone
patch of a 1-patch series.
Therefore, extend "git format-patch --interdiff=<prev>" to insert an
interdiff into the commentary section of a lone patch rather than
requiring a cover letter. The interdiff is indented to avoid confusing
git-am and human readers into considering it part of the patch proper.
Implementation note: Generating an interdiff for insertion into the
commentary section of a patch which itself is currently being generated
requires invoking the diffing machinery recursively. However, the
machinery does not (presently) support this since it uses global state.
Consequently, we need to take care to stash away the state of the
in-progress operation while generating the interdiff, and restore it
after.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A future change will allow "git format-patch --interdiff=<prev> -1" to
insert an interdiff into the commentary section of the lone patch of a
1-patch series. However, to prevent the inserted interdiff from
confusing git-am, as well as human readers, it needs to be indented.
Therefore, teach show_interdiff() how to indent.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --interdiff option introduces the embedded interdiff generically as
"Interdiff:", however, we can do better when --reroll-count is specified
by emitting "Interdiff against v{n}:" instead.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When submitting a revised version of a patch series, it can be helpful
(to reviewers) to include a summary of changes since the previous
attempt in the form of an interdiff, however, doing so involves manually
copy/pasting the diff into the cover letter.
Add an --interdiff option to automate this process. The argument to
--interdiff specifies the tip of the previous attempt against which to
generate the interdiff. For example:
git format-patch --cover-letter --interdiff=v1 -3 v2
The previous attempt and the patch series being formatted must share a
common base.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
make_cover_letter() returns early when it lacks sufficient state to emit
a diffstat, which makes it difficult to extend the function to reliably
emit additional generated content. Work around this shortcoming by
factoring diffstat-printing logic out to its own function and calling it
as needed without otherwise inhibiting normal control flow.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many messages will be marked for translation in the following
commits. This commit updates some of them to be more consistent and
reduce diff noise in those commits. Changes are
- keep the first letter of die(), error() and warning() in lowercase
- no full stop in die(), error() or warning() if it's single sentence
messages
- indentation
- some messages are turned to BUG(), or prefixed with "BUG:" and will
not be marked for i18n
- some messages are improved to give more information
- some messages are broken down by sentence to be i18n friendly
(on the same token, combine multiple warning() into one big string)
- the trailing \n is converted to printf_ln if possible, or deleted
if not redundant
- errno_errno() is used instead of explicit strerror()
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These methods are now declared in commit-reach.h. Remove them from
commit.h and add new include statements in all files that require these
declarations.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recently added "--base" option to "git format-patch" command did
not correctly generate prereq patch ids.
* xy/format-patch-prereq-patch-id-fix:
format-patch: clear UNINTERESTING flag before prepare_bases
The conversion to pass "the_repository" and then "a_repository"
throughout the object access API continues.
* sb/object-store-grafts:
commit: allow lookup_commit_graft to handle arbitrary repositories
commit: allow prepare_commit_graft to handle arbitrary repositories
shallow: migrate shallow information into the object parser
path.c: migrate global git_path_* to take a repository argument
cache: convert get_graft_file to handle arbitrary repositories
commit: convert read_graft_file to handle arbitrary repositories
commit: convert register_commit_graft to handle arbitrary repositories
commit: convert commit_graft_pos() to handle arbitrary repositories
shallow: add repository argument to is_repository_shallow
shallow: add repository argument to check_shallow_file_for_update
shallow: add repository argument to register_shallow
shallow: add repository argument to set_alternate_shallow_file
commit: add repository argument to lookup_commit_graft
commit: add repository argument to prepare_commit_graft
commit: add repository argument to read_graft_file
commit: add repository argument to register_commit_graft
commit: add repository argument to commit_graft_pos
object: move grafts to object parser
object-store: move object access functions to object-store.h
Add a repository argument to allow callers of lookup_commit_reference
to be more specific about which repository to handle. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a repository argument to allow the callers of parse_object
to be more specific about which repository to act on. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The in-core "commit" object had an all-purpose "void *util" field,
which was tricky to use especially in library-ish part of the
code. All of the existing uses of the field has been migrated to a
more dedicated "commit-slab" mechanism and the field is eliminated.
* nd/commit-util-to-slab:
commit.h: delete 'util' field in struct commit
merge: use commit-slab in merge remote desc instead of commit->util
log: use commit-slab in prepare_bases() instead of commit->util
show-branch: note about its object flags usage
show-branch: use commit-slab for commit-name instead of commit->util
name-rev: use commit-slab for rev-name instead of commit->util
bisect.c: use commit-slab for commit weight instead of commit->util
revision.c: use commit-slab for show_source
sequencer.c: use commit-slab to associate todo items to commits
sequencer.c: use commit-slab to mark seen commits
shallow.c: use commit-slab for commit depth instead of commit->util
describe: use commit-slab for commit names instead of commit->util
blame: use commit-slab for blame suspects instead of commit->util
commit-slab: support shared commit-slab
commit-slab.h: code split
When users specify the commit range with 'Z..C' pattern for format-patch, all
the parents of Z (including Z) would be marked as UNINTERESTING which would
prevent revision walk in prepare_bases from getting the prerequisite commits,
thus `git format-patch --base <base_commit_sha> Z..C` won't be able to generate
the list of prerequisite patch ids. Clear UNINTERESTING flag with
clear_object_flags solves this issue.
Reported-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The only thing these commands need is extra parseopt flag which can be
passed in by OPT_SET_INT_F() and it is a bit more compact than full
struct initialization.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git format-patch --cover --attach" created a broken MIME multipart
message for the cover letter, which has been fixed by keeping the
cover letter as plain text file.
* bc/format-patch-cover-no-attach:
format-patch: make cover letters always text/plain
The code has been taught to use the duplicated information stored
in the commit-graph file to learn the tree object name for a commit
to avoid opening and parsing the commit object when it makes sense
to do so.
* ds/lazy-load-trees:
coccinelle: avoid wrong transformation suggestions from commit.cocci
commit-graph: lazy-load trees for commits
treewide: replace maybe_tree with accessor methods
commit: create get_commit_tree() method
treewide: rename tree to maybe_tree
It's done so that commit->util can be removed. See more explanation in
the commit that removes commit->util.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of relying on commit->util to store the source string, let the
user provide a commit-slab to store the source strings in.
It's done so that commit->util can be removed. See more explanation in
the commit that removes commit->util.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This should make these functions easier to find and cache.h less
overwhelming to read.
In particular, this moves:
- read_object_file
- oid_object_info
- write_object_file
As a result, most of the codebase needs to #include object-store.h.
In this patch the #include is only added to files that would fail to
compile otherwise. It would be better to #include wherever
identifiers from the header are used. That can happen later
when we have better tooling for it.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When formatting a series of patches using --attach and --cover-letter,
the cover letter lacks the closing MIME boundary, violating RFC 2046.
Certain clients, such as Thunderbird, discard the message body in such a
case.
Since the cover letter is just one part and sending it as
multipart/mixed is not very useful, always emit it as text/plain,
avoiding the boundary problem altogether.
Reported-by: Patrick Hemmer <git@stormcloud9.net>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In anticipation of making trees load lazily, create a Coccinelle
script (contrib/coccinelle/commit.cocci) to ensure that all
references to the 'maybe_tree' member of struct commit are either
mutations or accesses through get_commit_tree() or
get_commit_tree_oid().
Apply the Coccinelle script to create the rest of the patch.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using the commit-graph file to walk commit history removes the large
cost of parsing commits during the walk. This exposes a performance
issue: lookup_tree() takes a large portion of the computation time,
even when Git never uses those trees.
In anticipation of lazy-loading these trees, rename the 'tree' member
of struct commit to 'maybe_tree'. This serves two purposes: it hints
at the future role of possibly being NULL even if the commit has a
valid tree, and it allows for unambiguous transformation from simple
member access (i.e. commit->maybe_tree) to method access.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert read_sha1_file to take a pointer to struct object_id and rename
it read_object_file. Do the same for read_sha1_file_extended.
Convert one use in grep.c to use the new function without any other code
change, since the pointer being passed is a void pointer that is already
initialized with a pointer to struct object_id. Update the declaration
and definitions of the modified functions, and apply the following
semantic patch to convert the remaining callers:
@@
expression E1, E2, E3;
@@
- read_sha1_file(E1.hash, E2, E3)
+ read_object_file(&E1, E2, E3)
@@
expression E1, E2, E3;
@@
- read_sha1_file(E1->hash, E2, E3)
+ read_object_file(E1, E2, E3)
@@
expression E1, E2, E3, E4;
@@
- read_sha1_file_extended(E1.hash, E2, E3, E4)
+ read_object_file_extended(&E1, E2, E3, E4)
@@
expression E1, E2, E3, E4;
@@
- read_sha1_file_extended(E1->hash, E2, E3, E4)
+ read_object_file_extended(E1, E2, E3, E4)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert find_unique_abbrev and find_unique_abbrev_r to each take a
pointer to struct object_id.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert the callback functions for read_tree_recursive to take a pointer
to struct object_id.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Patches generated by format-patch are meant to be exchanged as emails,
most of the time. And since it's generally agreed that text in mails
should be wrapped around 70 columns or so, make sure these diffstat
follow the convention (especially when used with --cover-letter since we
already defaults to wrapping 72 columns). The default can still be
overriden with command line options.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already wrap shortlog around 72 columns in cover letters. Do the same
for diffstat (also in cover letters).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"diff" family of commands learned "--find-object=<object-id>" option
to limit the findings to changes that involve the named object.
* sb/diff-blobfind-pickaxe:
diff: use HAS_MULTI_BITS instead of counting bits manually
diff: properly error out when combining multiple pickaxe options
diffcore: add a pickaxe option to find a specific blob
diff: introduce DIFF_PICKAXE_KINDS_MASK
diff: migrate diff_flags.pickaxe_ignore_case to a pickaxe_opts bit
diff.h: make pickaxe_opts an unsigned bit field
Currently the check whether to perform pickaxing is done via checking
`diffopt->pickaxe`, which contains the command line argument that we
want to pickaxe for. Soon we'll introduce a new type of pickaxing, that
will not store anything in the `.pickaxe` field, so let's migrate the
check to be dependent on pickaxe_opts.
It is not enough to just replace the check for pickaxe by pickaxe_opts,
because flags might be set, but pickaxing was not requested ('-i').
To cope with that, introduce a mask to check only for the bits indicating
the modes of operation.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When `log --decorate` is used, git will decorate commits with all
available refs. While in most cases this may give the desired effect,
under some conditions it can lead to excessively verbose output.
Introduce two command line options, `--decorate-refs=<pattern>` and
`--decorate-refs-exclude=<pattern>` to allow the user to select which
refs are used in decoration.
When "--decorate-refs=<pattern>" is given, only the refs that match the
pattern are used in decoration. The refs that match the pattern when
"--decorate-refs-exclude=<pattern>" is given, are never used in
decoration.
These options follow the same convention for mixing negative and
positive patterns across the system, assuming that the inclusive default
is to match all refs available.
(1) if there is no positive pattern given, pretend as if an
inclusive default positive pattern was given;
(2) for each candidate, reject it if it matches no positive
pattern, or if it matches any one of the negative patterns.
The rules for what is considered a match are slightly different from the
rules used elsewhere.
Commands like `log --glob` assume a trailing '/*' when glob chars are
not present in the pattern. This makes it difficult to specify a single
ref. On the other hand, commands like `describe --match --all` allow
specifying exact refs, but do not have the convenience of allowing
"shorthand refs" like 'refs/heads' or 'heads' to refer to
'refs/heads/*'.
The commands introduced in this patch consider a match if:
(a) the pattern contains globs chars,
and regular pattern matching returns a match.
(b) the pattern does not contain glob chars,
and ref '<pattern>' exists, or if ref exists under '<pattern>/'
This allows both behaviours (allowing single refs and shorthand refs)
yet remaining compatible with existent commands.
Helped-by: Kevin Daudt <me@ikke.info>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Rafael Ascensão <rafa.almas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A single-word "unsigned flags" in the diff options is being split
into a structure with many bitfields.
* bw/diff-opt-impl-to-bitfields:
diff: make struct diff_flags members lowercase
diff: remove DIFF_OPT_CLR macro
diff: remove DIFF_OPT_SET macro
diff: remove DIFF_OPT_TST macro
diff: remove touched flags
diff: add flag to indicate textconv was set via cmdline
diff: convert flags to be stored in bitfields
add, reset: use DIFF_OPT_SET macro to set a diff flag
Remove the `DIFF_OPT_SET` macro and instead set the flags directly.
This conversion is done using the following semantic patch:
@@
expression E;
identifier fld;
@@
- DIFF_OPT_SET(&E, fld)
+ E.flags.fld = 1
@@
type T;
T *ptr;
identifier fld;
@@
- DIFF_OPT_SET(ptr, fld)
+ ptr->flags.fld = 1
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
