The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Alternate refs backends might store reflogs somewhere other than
.git/logs. Change most test code that directly accesses .git/logs to
instead use git reflog commands.
There are still a few tests which need direct access to reflogs: to
check reflog permissions, to manually create reflogs from scratch, to
save/restore reflogs, to check the format of raw reflog data, and to
remove not just reflog contents, but the reflogs themselves. All cases
which don't need direct access have been modified.
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code that reads the reflog from the newer to the older entries
did not handle an entry that crosses a boundary of block it uses to
read them correctly.
* jk/for-each-reflog-ent-reverse:
for_each_reflog_ent_reverse: turn leftover check into assertion
for_each_reflog_ent_reverse: fix newlines on block boundaries
When we read a reflog file in reverse, we read whole chunks
of BUFSIZ bytes, then loop over the buffer, parsing any
lines we find. We find the beginning of each line by looking
for the newline from the previous line. If we don't find
one, we know that we are either at the beginning of
the file, or that we have to read another block.
In the latter case, we stuff away what we have into a
strbuf, read another block, and continue our parse. But we
missed one case here. If we did find a newline, and it is at
the beginning of the block, we must also stuff that newline
into the strbuf, as it belongs to the block we are about to
read.
The minimal fix here would be to add this special case to
the conditional that checks whether we found a newline.
But we can make the flow a little clearer by rearranging a
bit: we first handle lines that we are going to show, and
then at the end of each loop, stuff away any leftovers if
necessary. That lets us fold this special-case in with the
more common "we ended in the middle of a line" case.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Two tests recently added to t1410 create branches "a" and
"a/b" to test d/f conflicts on reflogs. Earlier, unrelated
tests in that script create the path "A/B" in the working
tree. There's no conflict on a case-sensitive filesystem,
but on a case-insensitive one, "git log" will complain that
"a/b" is both a revision and a working tree path.
We could fix this by using a "--" to disambiguate, but we
are probably better off using names that are less confusing
to make it more clear that they are unrelated to the working
tree files. This patch turns "a/b" into "one/two".
Reported-by: Michael Blume <blume.mike@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Corner-case bugfixes for "git fetch" around reflog handling.
* jk/fetch-reflog-df-conflict:
ignore stale directories when checking reflog existence
fetch: load all default config at startup
When we update a ref, we have two rules for whether or not
we actually update the reflog:
1. If the reflog already exists, we will always append to
it.
2. If log_all_ref_updates is set, we will create a new
reflog file if necessary.
We do the existence check by trying to open the reflog file,
either with or without O_CREAT (depending on log_all_ref_updates).
If it fails, then we check errno to see what happened.
If we were not using O_CREAT and we got ENOENT, the file
doesn't exist, and we return success (there isn't a reflog
already, and we were not told to make a new one).
If we get EISDIR, then there is likely a stale directory
that needs to be removed (e.g., there used to be "foo/bar",
it was deleted, and the directory "foo" was left. Now we
want to create the ref "foo"). If O_CREAT is set, then we
catch this case, try to remove the directory, and retry our
open. So far so good.
But if we get EISDIR and O_CREAT is not set, then we treat
this as any other error, which is not right. Like ENOENT,
EISDIR is an indication that we do not have a reflog, and we
should silently return success (we were not told to create
it). Instead, the current code reports this as an error, and
we fail to update the ref at all.
Note that this is relatively unlikely to happen, as you
would have to have had reflogs turned on, and then later
turned them off (it could also happen due to a bug in fetch,
but that was fixed in the previous commit). However, it's
quite easy to fix: we just need to treat EISDIR like ENOENT
for the non-O_CREAT case, and silently return (note that
this early return means we can also simplify the O_CREAT
case).
Our new tests cover both cases (O_CREAT and non-O_CREAT).
The first one already worked, of course.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change checkout.c to check if a ref exists instead of checking if a loose ref
file exists when deciding if to delete an orphaned log file. Otherwise, if a
ref only exists as a packed ref without a corresponding loose ref for the
currently checked out branch, we risk that the reflog will be deleted when we
switch to a different branch.
Update the reflog tests to check for this bug.
The following reproduces the bug:
$ git init-db
$ git config core.logallrefupdates true
$ git commit -m Initial --allow-empty
[master (root-commit) bb11abe] Initial
$ git reflog master
[8561dcb master@{0}: commit (initial): Initial]
$ find .git/{refs,logs} -type f | grep master
[.git/refs/heads/master]
[.git/logs/refs/heads/master]
$ git branch foo
$ git pack-refs --all
$ find .git/{refs,logs} -type f | grep master
[.git/logs/refs/heads/master]
$ git checkout foo
$ find .git/{refs,logs} -type f | grep master
... reflog file is missing ...
$ git reflog master
... nothing ...
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Acked-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prefer:
test_line_count <OP> COUNT FILE
over:
test $(wc -l <FILE) <OP> COUNT
(or similar usages) in several tests.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Breaks in a test assertion's && chain can potentially hide
failures from earlier commands in the chain.
Commands intended to fail should be marked with !, test_must_fail, or
test_might_fail. The examples in this patch do not require that.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, if gc.reflogexpire or gc.reflogexpire were set to "never"
or "false", the builtin default values were used instead.
Signed-off-by: Adam Simpkins <simpkins@facebook.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function replaces sequences of 'chmod +x' and 'git update-index
--chmod=+x' in the test suite, whose purpose is to help filesystems
that need core.filemode=false. Two places where only 'chmod +x' was used
we also use this new function.
The function calls 'git update-index --chmod' without checking
core.filemode (unlike some of the call sites did). We do this because the
call sites *expect* that the executable bit ends up in the index (ie. it
is not the purpose of the call sites to *test* whether git treats
'chmod +x' and 'update-index --chmod=+x' correctly). Therefore, on
filesystems with core.filemode=true the 'git update-index --chmod' is a
no-op.
The function uses --add with update-index to help one call site in
t6031-merge-recursive. It makes no difference for the other callers.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
dwim_ref() used to resolve HEAD symbolic ref to its target (i.e. current
branch). This incorrectly removed the reflog entry from the current
branch when 'git reflog delete HEAD@{1}' was asked for.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds more tests for 'reflog delete' and marks it as
broken, as currently a call to 'git reflog delete HEAD@{1}'
deletes entries in the currently checked out branch's log,
not the HEAD log.
Noticed by John Wiegley
Signed-off-by: Pieter de Bie <pdebie@ai.rug.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The only reason we did not call "prune" in git-gc was that it is an
inherently dangerous operation: if there is a commit going on, you will
prune loose objects that were just created, and are, in fact, needed by the
commit object just about to be created.
Since it is dangerous, we told users so. That led to many users not even
daring to run it when it was actually safe. Besides, they are users, and
should not have to remember such details as when to call git-gc with
--prune, or to call git-prune directly.
Of course, the consequence was that "git gc --auto" gets triggered much
more often than we would like, since unreferenced loose objects (such as
left-overs from a rebase or a reset --hard) were never pruned.
Alas, git-prune recently learnt the option --expire <minimum-age>, which
makes it a much safer operation. This allows us to call prune from git-gc,
with a grace period of 2 weeks for the unreferenced loose objects (this
value was determined in a discussion on the git list as a safe one).
If you want to override this grace period, just set the config variable
gc.pruneExpire to a different value; an example would be
[gc]
pruneExpire = 6.months.ago
or even "never", if you feel really paranoid.
Note that this new behaviour makes "--prune" be a no-op.
While adding a test to t5304-prune.sh (since it really tests the implicit
call to "prune"), also the original test for "prune --expire" was moved
there from t1410-reflog.sh, where it did not belong.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
* bc/reflog-fix: (1490 commits)
builtin-reflog.c: don't install new reflog on write failure
hash: fix lookup_hash semantics
gitweb: Better chopping in commit search results
builtin-tag.c: remove cruft
git-merge-index documentation: clarify synopsis
send-email: fix In-Reply-To regression
git-reset --hard and git-read-tree --reset: fix read_cache_unmerged()
Teach git-grep --name-only as synonym for -l
diff: fix java funcname pattern for solaris
t3404: use configured shell instead of /bin/sh
git_config_*: don't assume we are parsing a config file
prefix_path: use is_absolute_path() instead of *orig == '/'
git-clean: handle errors if removing files fails
Clarified the meaning of git-add -u in the documentation
git-clone.sh: properly configure remote even if remote's head is dangling
git.el: Set process-environment instead of invoking env
Documentation/git-stash: document options for git stash list
send-email: squelch warning due to comparing undefined $_ to ""
cvsexportcommit: be graceful when "cvs status" reorders the arguments
Rename git-core rpm to just git and rename the meta-pacakge to git-all.
...
Conflicts:
Documentation/git-reflog.txt
t/t1410-reflog.sh
Earlier, 'git prune' would prune all loose unreachable objects.
This could be quite dangerous, as the objects could be used in
an ongoing operation.
This patch adds a mode to expire only loose, unreachable objects
which are older than a certain time. For example, by
git prune --expire 14.days
you can prune only those objects which are loose, unreachable
and older than 14 days (and thus probably outdated).
The implementation uses st.st_mtime rather than st.st_ctime,
because it can be tested better, using 'touch -d <time>' (and
omitting the test when the platform does not support that
command line switch).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit implements the "delete" subcommand:
git reflog delete master@{2}
will delete the second reflog entry of the "master" branch.
With this, it should be easy to implement "git stash pop" everybody
seems to want these days.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This reverts commit 9b088c4e39.
Protecting 'mature' objects does not make it any safer. We should
admit that git-prune is inherently unsafe when run in parallel with
other operations without involving unwarranted locking overhead,
and with the latest git, even rebase and reset would not immediately
create crufts anyway.
This option gives grace period to objects that are unreachable
from the refs from getting pruned.
The default value is 24 hours and may be changed using
gc.prunegrace.
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Since c869753e, core.filemode is hardwired to false on Cygwin.
So this test had no chance to succeed, since an early commit
(changing just the filemode) failed, and therefore all subsequent
tests.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The logic in an earlier round to detect reflog entries that
point at a broken commit was not sufficient. Just like we do
not trust presense of a commit during pack transfer (we trust
only our refs), we should not trust a commit's presense, even if
the tree of that commit is complete.
A repository that had reflog enabled on some of the refs that
was rewound and then run git-repack or git-prune from older
versions of git can have reflog entries that point at a commit
that still exist but lack commits (or trees and blobs needed for
that commit) between it and some commit that is reachable from
one of the refs.
This revamps the logic -- the definition of "broken commit"
becomes: a commit that is not reachable from any of the refs and
there is a missing object among the commit, tree, or blob
objects reachable from it that is not reachable from any of the
refs. Entries in the reflog that refer to such a commit are
expired.
Since this computation involves traversing all the reachable
objects, i.e. it has the same cost as 'git prune', it is enabled
only when a new option --fix-stale. Fortunately, once this is
run, we should not have to ever worry about missing objects,
because the current prune and pack-objects know about reflogs
and protect objects referred by them.
Unfortunately, this will be absolutely necessary to help people
migrate to the newer prune and repack.
Signed-off-by: Junio C Hamano <junkio@cox.net>
