The read_cache() in prepare_to_commit() would end up clobbering the
pointer we had for a previously populated "the_index.cache_tree" in
the very common case of "git commit" stressed by e.g. the tests being
changed here.
We'd populate "the_index.cache_tree" by calling
"update_main_cache_tree" in prepare_index(), but would not end up with
a "fully prepared" index. What constitutes an existing index is
clearly overly fuzzy, here we'll check "active_nr" (aka
"the_index.cache_nr"), but our "the_index.cache_tree" might have been
malloc()'d already.
Thus the code added in 11c8a74a64 (commit: write cache-tree data when
writing index anyway, 2011-12-06) would end up allocating the
"cache_tree", and would interact here with code added in
7168624c35 (Do not generate full commit log message if it is not
going to be used, 2007-11-28). The result was a very common memory
leak.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
In demultiplex_sideband(), there are two oddities when we check an
incoming packet:
- if it has zero length, then we assume it's a flush packet. This
means we fail to notice the difference between a real flush and a
true zero-length packet that's missing its sideband designator. It's
not a huge problem in practice because we'd never send a zero-length
data packet (even our keepalives are otherwise-empty sideband-1
packets).
But it would be nice to detect and report the error, since it's
likely to cause other confusion (we think the other side flushed,
but they do not).
- we try to detect packets missing their designator by checking for
"if (len < 1)". But this will never trigger for "len == 0"; we've
already detected that and left the function before then.
It _could_ detect a negative "len" parameter. But in that case, the
error message is wrong. The issue is not "no sideband" but rather
"eof while reading the packet". However, this can't actually be
triggered in practice, because neither of the two callers uses
pkt_read's GENTLE_ON_EOF flag. Which means they'd die with "the
remote end hung up unexpectedly" before we even get here.
So this truly is dead code.
We can improve these cases by passing in a pkt-line status to the
demultiplexer, and by having recv_sideband() use GENTLE_ON_EOF. This
gives us two improvements:
- we can now reliably detect flush packets, and will report a normal
packet missing its sideband designator as an error
- we'll report an eof with a more detailed "protocol error: eof while
reading sideband packet", rather than the generic "the remote end
hung up unexpectedly"
- when we see an eof, we'll flush the sideband scratch buffer, which
may provide some hints from the remote about why they hung up
(though note we already flush on newlines, so it's likely that most
such messages already made it through)
In some sense this patch goes against fbd76cd450 (sideband: reverse its
dependency on pkt-line, 2019-01-16), which caused the sideband code not
to depend on the pkt-line code. But that commit was really just trying
to deal with the circular header dependency. The two modules are
conceptually interlinked, and it was just trying to keep things
compiling. And indeed, there's a sticking point in this patch: because
pkt-line.h includes sideband.h, we can't add the reverse include we need
for the sideband code to have an "enum packet_read_status" parameter.
Nor can we forward declare it, because you can't forward declare an enum
in C. However, C does guarantee that enums fit in an int, so we can just
use that type.
One alternative would be for the callers to check themselves that they
got something sane from the pkt-line code. But besides duplicating
logic, this gets quite tricky. Any error condition requires flushing the
sideband #2 scratch buffer, which only demultiplex_sideband() knows how
to do.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 2b695ecd74 (t5500: count objects through stderr, not trace,
2020-05-06) we tried to ensure that the "Total 3" message could be
grepped in Git's output, even if it sometimes got chopped up into
multiple lines in the trace machinery.
However, the first instance where this mattered now goes through the
sideband machinery, where it is _still_ possible for messages to get
chopped up: it *is* possible for the standard error stream to be sent
byte-for-byte and hence it can be easily interrupted. Meaning: it is
possible for the single line that we're looking for to be chopped up
into multiple sideband packets, with a primary packet being delivered
between them.
This seems to happen occasionally in the `vs-test` part of our CI
builds, i.e. with binaries built using Visual C, but not when building
with GCC or clang; The symptom is that t5500.43 fails to find a line
matching `remote: Total 3` in the `log` file, which ends in something
along these lines:
remote: Tota
remote: l 3 (delta 0), reused 0 (delta 0), pack-reused 0
This should not happen, though: we have code in `demultiplex_sideband()`
_specifically_ to stitch back together lines that were delivered in
separate sideband packets.
However, this stitching was broken in a subtle way in fbd76cd450
(sideband: reverse its dependency on pkt-line, 2019-01-16): before that
change, incomplete sideband lines would not be flushed upon receiving a
primary packet, but after that patch, they would be.
The subtleness of this bug comes from the fact that it is easy to get
confused by the ambiguous meaning of the `break` keyword: after writing
the primary packet contents, the `break;` in the original version of
`recv_sideband()` does _not_ break out of the `while` loop, but instead
only ends the `switch` case:
while (!retval) {
[...]
switch (band) {
[...]
case 1:
/* Write the contents of the primary packet */
write_or_die(out, buf + 1, len);
/* Here, we do *not* break out of the loop, `retval` is unchanged */
break;
[...]
}
if (outbuf.len) {
/* Write any remaining sideband messages lacking a trailing LF */
strbuf_addch(&outbuf, '\n');
xwrite(2, outbuf.buf, outbuf.len);
}
In contrast, after fbd76cd450 (sideband: reverse its dependency on
pkt-line, 2019-01-16), the body of the `while` loop was extracted into
`demultiplex_sideband()`, crucially _including_ the logic to write
incomplete sideband messages:
switch (band) {
[...]
case 1:
*sideband_type = SIDEBAND_PRIMARY;
/* This does not break out of the loop: the loop is in the caller */
break;
[...]
}
cleanup:
[...]
/* This logic is now no longer _outside_ the loop but _inside_ */
if (scratch->len) {
strbuf_addch(scratch, '\n');
xwrite(2, scratch->buf, scratch->len);
}
The correct way to fix this is to return from `demultiplex_sideband()`
early. The caller will then write out the contents of the primary packet
and continue looping. The `scratch` buffer for incomplete sideband
messages is owned by that caller, and will continue to accumulate the
remainder(s) of those messages. The loop will only end once
`demultiplex_sideband()` returned non-zero _and_ did not indicate a
primary packet, which is the case only when we hit the `cleanup:` path,
in which we take care of flushing any unfinished sideband messages and
release the `scratch` buffer.
To ensure that this does not get broken again, we introduce a pair of
subcommands of the `pkt-line` test helper that specifically chop up the
sideband message and squeeze a primary packet into the middle.
Final note: The other test case touched by 2b695ecd74 (t5500: count
objects through stderr, not trace, 2020-05-06) is not affected by this
issue because the sideband machinery is not involved there.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some of our tests try to make sure Git behaves sensibly in a
read-only directory, by dropping 'w' permission bit before doing a
test and then restoring it after it is done. The latter is needed
for the test framework to clean after itself without leaving a
leftover directory that cannot be removed.
Ancient parts of tests however arrange the above with
chmod a-w . &&
... do the test ...
status=$?
chmod 775 .
(exit $status)
which obviously would not work if the test somehow dies before it
has the chance to do "chmod 775". Rewrite them by following a more
robust pattern recently written tests use, which is
test_when_finished "chmod 775 ." &&
chmod a-w . &&
... do the test ...
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is in preparation to turn test-regex into some generic regex
testing command.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the SANITY prerequisite when testing if a temp file can
be created in a read only directory.
Skip the test under CYGWIN, or skip it under Unix/Linux when
it is run as root.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before, when creating a temporary file failed, a generic 'Unable to create
temporary file' message was printed. In some cases this could lead to
confusion as to which directory should be checked for correct permissions etc.
This patch adds the template for the temporary filename to the error message,
converting it to an absolute path if needed. A test verifies that the template
is indeed printed when pointing to a nonexistent or unwritable directory.
A copy of the original template is made in case mkstemp clears the template.
Signed-off-by: Arnout Engelen <arnouten@bzzt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Manipulating the character class table in ctype.c by hand is error prone.
To ensure that typos are found quickly, add a test program and script.
test-ctype checks the output of the character class macros isspace() et.
al. by applying them on all possible char values and consulting a list of
all characters in the particular class. It doesn't check tolower() and
toupper(); this could be added later.
The test script t0070-fundamental.sh is created because there is no good
place for the ctype test, yet -- except for t0000-basic.sh perhaps, but
it doesn't run well on Windows, yet.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
