The pagination functionality in git am has some problems:
- It does not check if stdout is a tty, so it always paginates.
- If $GIT_PAGER uses any environment variables, they are being
ignored, since it does not run $GIT_PAGER through eval.
- If $GIT_PAGER is set to the empty string, instead of passing
output through to stdout, it tries to run $dotest/patch.
Fix them. While at it, move the definition of git_pager() to
git-sh-setup so authors of other commands are not tempted to
reimplement it with the same mistakes.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise the errors can propagate, and show in damnest places, and
you would spend your time chasing ghosts instead of debugging real
problem (yes, it is from personal experience).
This follows (parts of) advice in `perldoc -f do` documentation.
This required restructoring code a bit, so we die only if we are reading
(executing) config file. As a side effect $GITWEB_CONFIG_SYSTEM is always
available, even when we use $GITWEB_CONFIG.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In commit dec543e (am -i, git-svn: use "git var GIT_PAGER"), I tried
to teach git svn to defer to git var on what pager to use. In the
process, I introduced two bugs:
- The value set for $pager in config_pager has local scope, so
run_pager never sees it;
- git var cannot tell whether git svn’s output is going to a
terminal, so the value chosen for $pager does not reflect that
information.
Fix them.
Reported-by: Sebastian Celis <sebastian@sebastiancelis.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --paginate option is meant to negate the effect of an explicit or
implicit pager.<cmd> = false setting. Thus it turns the pager on if
output is going to a terminal rather than unconditionally.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Scripted commands that want to use git’s configured pager know better
than ‘git var’ does whether stdout is going to be a tty at the
appropriate time. Checking isatty(1) as git_pager() does now won’t
cut it, since the output of git var itself is almost never a terminal.
The symptom is that when used by humans, ‘git var GIT_PAGER’ behaves
as it should, but when used by scripts, it always returns ‘cat’!
So avoid tricks with isatty() and just always print the configured
pager.
This does not fix the callers to check isatty(1) themselves yet.
Nevertheless, this patch alone is enough to fix 'am --interactive'.
Thanks to Sebastian Celis for the report and Jeff King for the
analysis.
Reported-by: Sebastian Celis <sebastian@sebastiancelis.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If git_dir already has the trailing slash, don't put another one
before .git. This only happens when git_dir is '/' or 'C:/'
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When concatenating two paths, if the first one already have '/', do
not put another '/' in between the two paths.
Usually this is not the case as getcwd() won't return '/foo/bar/',
except when you are standing at root, then it will return '/'.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is useful for keeping notes to objects that are being rewritten by e.g.
'git commit --amend', 'git rebase', or 'git cherry-pick'.
"git notes copy <from> <to>" is in practice equivalent to
"git notes add -C $(git notes list <from>) <to>", although it is somewhat
more convenient for regular users.
"git notes copy" takes the same -f option as "git add", to overwrite existing
notes at the target (instead of aborting with an error message).
If the <from>-object has no notes, "git notes copy" will abort with an error
message.
The patch includes tests verifying correct behaviour of the new subcommand.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is in preparation of future patches that add additional subcommands.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Inspired by the -c/-C options to "git commit", we teach these options to
"git notes add/append" to allow reuse of note objects.
With this patch in place, it is now easy to copy or move notes between
objects. For example, to copy object A's notes to object B:
git notes add [-f] -C $(git notes list A) B
To move instead of copying, you simply remove the notes from the source
object afterwards, e.g.:
git notes remove A
The patch includes tests verifying correct behaviour of the new functionality.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By moving the -F option handling into a separate function (parse_file_arg),
we can start allowing several -F options, and mixed usage of -m and -F
options. Each -m/-F given appends to the note message, in the order they are
given on the command-line.
The patch includes tests verifying correct behaviour of the new functionality.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The semantics for "git notes edit -m/-F" overlap with those for
"git notes add -f", and the behaviour (i.e. overwriting existing
notes with the given message/file) is more intuitively captured
by (and better documented with) "git notes add -f".
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git notes append" is equivalent to "git notes edit" except that instead
of editing existing notes contents, you can only append to it. This is
useful for quickly adding annotations like e.g.:
git notes append -m "Acked-by: A U Thor <author@example.com>"
"git notes append" takes the same -m/-F options as "git notes add".
If there is no existing note to append to, "git notes append" is identical
to "git notes add" (i.e. it adds a new note).
The patch includes tests verifying correct behaviour of the new subcommand.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git notes add" is identical to "git notes edit" except that instead of
editing existing notes for a given object, you can only add notes to an
object that currently has none. If "git notes add" finds existing notes
for the given object, the addition is aborted. However, if the new
-f/--force option is used, "git notes add" will _overwrite_ the existing
notes with the new notes contents.
If there is no existing notes for the given object. "git notes add" is
identical to "git notes edit" (i.e. it adds a new note).
The patch includes tests verifying correct behaviour of the new subcommand.
Suggested-by: Joey Hess <joey@kitenet.net>
Improved-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git notes list" will list all note objects in the current notes ref (in the
format "<note object> <annotated object>"). "git notes list <object>" will
list the note object associated with the given <object>, or fail loudly if
the given <object> has no associated notes.
If no arguments are given to "git notes", it defaults to the "list"
subcommand. This is for pseudo-compatibility with "git tag" and "git branch".
The patch includes tests verifying correct behaviour of the new subcommand.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Notes can annotate arbitrary objects (not only commits), but this is not
reflected in the current documentation.
This patch rewrites the git-notes documentation to talk about 'objects'
instead of 'commits'. However, the discussion on commit notes and how
they are displayed by 'git log' is largely preserved.
Finally, I add myself to the Author/Documentation credits, since most of
the lines in the git-notes code and docs are blamed on me.
Cc: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git notes prune" will remove all notes that annotate unreachable/non-
existing objects.
The patch includes tests verifying correct behaviour of the new subcommand.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When an object is made unreachable by Git, any notes that annotate that object
are not automagically made unreachable, since all notes are always trivially
reachable from a notes ref. In order to remove notes for non-existing objects,
we therefore need to add functionality for traversing the notes tree and
explicitly removing references to notes that annotate non-reachable objects.
Thus the notes objects themselves also become unreachable, and are removed
by a later garbage collect.
prune_notes() performs this traversal (by using for_each_note() internally),
and removes the notes in question from the notes tree.
Note that the effect of prune_notes() is not persistent unless a subsequent
call to write_notes_tree() is made.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using "git notes remove" is equivalent to specifying an empty note message.
The patch includes tests verifying correct behaviour of the new subcommand.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the result of editing a note is an empty string, the associated note
entry should be deleted from the notes tree.
This allows deleting notes by invoking either "git notes -m ''" or
"git notes -F /dev/null".
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The note tree structure allows for non-note entries to coexist with note
entries in a notes tree. Although we certainly expect there to be very
few non-notes in a notes tree, we should still support them to a certain
degree.
This patch teaches the notes code to preserve non-notes when updating the
notes tree with write_notes_tree(). Non-notes are not affected by fanout
restructuring.
For non-notes to be handled correctly, we can no longer allow subtree
entries that do not match the fanout structure produced by the notes code
itself. This means that fanouts like 4/36, 6/34, 8/32, 4/4/32, etc. are
no longer recognized as note subtrees; only 2-based fanouts are allowed
(2/38, 2/2/36, 2/2/2/34, etc.). Since the notes code has never at any point
_produced_ non-2-based fanouts, it is highly unlikely that this change will
cause problems for anyone.
The patch also adds some tests verifying the correct handling of non-notes
in a notes tree.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a test verifying that the notes code automatically restructures the
notes tree into a deeper fanout level, when many notes are added with
"git notes".
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adds a testcase verifying that git-notes works successfully on
tree, blob, and tag objects.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The builtin-ification includes some minor behavioural changes to the
command-line interface: It is no longer allowed to mix the -m and -F
arguments, and it is not allowed to use multiple -F options.
As part of the builtin-ification, we add the commit_notes() function
to the builtin API. This function (together with the notes.h API) can
be easily used from other builtins to manipulate the notes tree.
Also includes needed changes to t3301.
This patch has been improved by the following contributions:
- Stephen Boyd: Use die() instead of fprintf(stderr, ...) followed by exit(1)
Cc: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When adding a note to an object that already has an existing note, the
current solution is to concatenate the contents of the two notes. However,
the caller may instead wish to _overwrite_ the existing note with the new
note, or maybe even _ignore_ the new note, and keep the existing one. There
might also be other ways of combining notes that are only known to the
caller.
Therefore, instead of unconditionally concatenating notes, we let the caller
specify how to combine notes, by passing in a pointer to a function for
combining notes. The caller may choose to implement its own function for
notes combining, but normally one of the following three conveniently
supplied notes combination functions will be sufficient:
- combine_notes_concatenate() combines the two notes by appending the
contents of the new note to the contents of the existing note.
- combine_notes_overwrite() replaces the existing note with the new note.
- combine_notes_ignore() keeps the existing note, and ignores the new note.
A combine_notes function can be passed to init_notes() to choose a default
combine_notes function for that notes tree. If NULL is given, the notes tree
falls back to combine_notes_concatenate() as the ultimate default.
A combine_notes function can also be passed directly to add_note(), to
control the notes combining behaviour for a note addition in particular.
If NULL is passed, the combine_notes function registered for the given
notes tree is used.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new struct notes_tree encapsulates access to a specific notes tree.
It is provided to allow callers to make use of several different notes trees
simultaneously.
A struct notes_tree * parameter is added to every function in the notes API.
In all cases, NULL can be passed, in which case the fallback "default" notes
tree (default_notes_tree) is used.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Uses for_each_note() to traverse the notes tree, and produces tree
objects on the fly representing the "on-disk" version of the notes
tree with appropriate fanout.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This includes a first attempt at creating an optimal fanout scheme (which
is calculated on-the-fly, while traversing).
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Created by a simple cleanup and rename of lookup_notes().
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This includes adding internal functions for maintaining a healthy notes tree
structure after removing individual notes.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Created by a simple refactoring of initialize_notes().
Also add a new 'flags' parameter, which is a bitwise combination of notes
initialization flags. For now, there is only one flag - NOTES_INIT_EMPTY -
which indicates that the notes tree should not auto-load the contents of
the given (or default) notes ref, but rather should leave the notes tree
initialized to an empty state. This will become useful in the future when
manipulating the notes tree through the notes API.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is really no reason why only commit objects can be annotated. By
changing the struct commit parameter to get_commit_notes() into a sha1 we
gain the ability to annotate any object type. To reflect this in the function
naming as well, we rename get_commit_notes() to format_note().
This patch also fixes comments and variable names throughout notes.c as a
consequence of the removal of the unnecessary 'commit' restriction.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/cherry-pick-reword:
cherry-pick: prettify the advice message
cherry-pick: show commit name instead of sha1
cherry-pick: format help message as strbuf
cherry-pick: refactor commit parsing code
cherry-pick: rewrap advice message
This expands to "symref" or "packed" or an empty string, exposing the
internal "flag" the for_each_ref() callback functions are called with.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
New %(symref) output atom expands to the name of the ref a symbolic ref
points at, or an empty string if the ref being shown is not a symref.
This may help scripted Porcelain writers.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
