"git status" carefully names a detached HEAD "at" resp. "from" a rev or
ref depending on whether the detached HEAD has moved since. "git branch"
always uses "from", which can be confusing, because a status-aware user
would interpret this as moved detached HEAD.
Make "git branch" use the same logic and wording.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch puts the usage info strings that were not already in docopt-
like format into docopt-like format, which will be a litle easier for
end users and a lot easier for translators. Changes include:
- Placing angle brackets around fill-in-the-blank parameters
- Putting dashes in multiword parameter names
- Adding spaces to [-f|--foobar] to make [-f | --foobar]
- Replacing <foobar>* with [<foobar>...]
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git branch -d" (delete) and "git branch -m" (move) learned to
honor "-f" (force) flag; unlike many other subcommands, the way to
force these have been with separate "-D/-M" options, which was
inconsistent.
* mg/branch-d-m-f:
branch: allow -f with -m and -d
t3200-branch: test -M
-f/--force is the standard way to force an action, and is used by branch
for the recreation of existing branches, but not for deleting unmerged
branches nor for renaming to an existing branch.
Make "-m -f" equivalent to "-M" and "-d -f" equivalent to" -D", i.e.
allow -f/--force to be used with -m/-d also.
For the list modes, "-f" is simply ignored.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes common problems in these code about error handling,
forgetting to close the file handle after fprintf() fails, or not
printing out the error string..
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The API to update refs have been restructured to allow introducing
a true transactional updates later. We would even allow storing
refs in backends other than the traditional filesystem-based one.
* rs/ref-transaction: (25 commits)
ref_transaction_commit: bail out on failure to remove a ref
lockfile: remove unable_to_lock_error
refs.c: do not permit err == NULL
remote rm/prune: print a message when writing packed-refs fails
for-each-ref: skip and warn about broken ref names
refs.c: allow listing and deleting badly named refs
test: put tests for handling of bad ref names in one place
packed-ref cache: forbid dot-components in refnames
branch -d: simplify by using RESOLVE_REF_READING
branch -d: avoid repeated symref resolution
reflog test: test interaction with detached HEAD
refs.c: change resolve_ref_unsafe reading argument to be a flags field
refs.c: make write_ref_sha1 static
fetch.c: change s_update_ref to use a ref transaction
refs.c: ref_transaction_commit: distinguish name conflicts from other errors
refs.c: pass a list of names to skip to is_refname_available
refs.c: call lock_ref_sha1_basic directly from commit
refs.c: refuse to lock badly named refs in lock_ref_sha1_basic
rename_ref: don't ask read_ref_full where the ref came from
refs.c: pass the ref log message to _create/delete/update instead of _commit
...
We currently do not handle badly named refs well:
$ cp .git/refs/heads/master .git/refs/heads/master.....@\*@\\.
$ git branch
fatal: Reference has invalid format: 'refs/heads/master.....@*@\.'
$ git branch -D master.....@\*@\\.
error: branch 'master.....@*@\.' not found.
Users cannot recover from a badly named ref without manually finding
and deleting the loose ref file or appropriate line in packed-refs.
Making that easier will make it easier to tweak the ref naming rules
in the future, for example to forbid shell metacharacters like '`'
and '"', without putting people in a state that is hard to get out of.
So allow "branch --list" to show these refs and allow "branch -d/-D"
and "update-ref -d" to delete them. Other commands (for example to
rename refs) will continue to not handle these refs but can be changed
in later patches.
Details:
In resolving functions, refuse to resolve refs that don't pass the
git-check-ref-format(1) check unless the new RESOLVE_REF_ALLOW_BAD_NAME
flag is passed. Even with RESOLVE_REF_ALLOW_BAD_NAME, refuse to
resolve refs that escape the refs/ directory and do not match the
pattern [A-Z_]* (think "HEAD" and "MERGE_HEAD").
In locking functions, refuse to act on badly named refs unless they
are being deleted and either are in the refs/ directory or match [A-Z_]*.
Just like other invalid refs, flag resolved, badly named refs with the
REF_ISBROKEN flag, treat them as resolving to null_sha1, and skip them
in all iteration functions except for for_each_rawref.
Flag badly named refs (but not symrefs pointing to badly named refs)
with a REF_BAD_NAME flag to make it easier for future callers to
notice and handle them specially. For example, in a later patch
for-each-ref will use this flag to detect refs whose names can confuse
callers parsing for-each-ref output.
In the transaction API, refuse to create or update badly named refs,
but allow deleting them (unless they try to escape refs/ and don't match
[A-Z_]*).
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git branch -d" reads the branch it is about to delete, it used
to avoid passing the RESOLVE_REF_READING ('treat missing ref as
error') flag because a symref pointing to a nonexistent ref would show
up as missing instead of as something that could be deleted. To check
if a ref is actually missing, we then check
- is it a symref?
- if not, did it resolve to null_sha1?
Now we pass RESOLVE_REF_NO_RECURSE and the correct information is
returned for a symref even when it points to a missing ref. Simplify
by relying on RESOLVE_REF_READING.
No functional change intended.
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a repository gets in a broken state with too much symref nesting,
it cannot be repaired with "git branch -d":
$ git symbolic-ref refs/heads/nonsense refs/heads/nonsense
$ git branch -d nonsense
error: branch 'nonsense' not found.
Worse, "git update-ref --no-deref -d" doesn't work for such repairs
either:
$ git update-ref -d refs/heads/nonsense
error: unable to resolve reference refs/heads/nonsense: Too many levels of symbolic links
Fix both by teaching resolve_ref_unsafe a new RESOLVE_REF_NO_RECURSE
flag and passing it when appropriate.
Callers can still read the value of a symref (for example to print a
message about it) with that flag set --- resolve_ref_unsafe will
resolve one level of symrefs and stop there.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Reviewed-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
resolve_ref_unsafe takes a boolean argument for reading (a nonexistent ref
resolves successfully for writing but not for reading). Change this to be
a flags field instead, and pass the new constant RESOLVE_REF_READING when
we want this behaviour.
While at it, swap two of the arguments in the function to put output
arguments at the end. As a nice side effect, this ensures that we can
catch callers that were unaware of the new API so they can be audited.
Give the wrapper functions resolve_refdup and read_ref_full the same
treatment for consistency.
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Originally the color-parsing function was used only for
config variables. It made sense to pass the variable name so
that the die() message could be something like:
$ git -c color.branch.plain=bogus branch
fatal: bad color value 'bogus' for variable 'color.branch.plain'
These days we call it in other contexts, and the resulting
error messages are a little confusing:
$ git log --pretty='%C(bogus)'
fatal: bad color value 'bogus' for variable '--pretty format'
$ git config --get-color foo.bar bogus
fatal: bad color value 'bogus' for variable 'command line'
This patch teaches color_parse to complain only about the
value, and then return an error code. Config callers can
then propagate that up to the config parser, which mentions
the variable name. Other callers can provide a custom
message. After this patch these three cases now look like:
$ git -c color.branch.plain=bogus branch
error: invalid color value: bogus
fatal: unable to parse 'color.branch.plain' from command-line config
$ git log --pretty='%C(bogus)'
error: invalid color value: bogus
fatal: unable to parse --pretty format
$ git config --get-color foo.bar bogus
error: invalid color value: bogus
fatal: unable to parse default color value
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many config-parsing helpers, like parse_branch_color_slot,
take the name of a config variable and an offset to the
"slot" name (e.g., "color.branch.plain" is passed along with
"13" to effectively pass "plain"). This is leftover from the
time that these functions would die() on error, and would
want the full variable name for error reporting.
These days they do not use the full variable name at all.
Passing a single pointer to the slot name is more natural,
and lets us more easily adjust the callers to use skip_prefix
to avoid manually writing offset numbers.
This is effectively a continuation of 9e1a5eb, which did the
same for parse_diff_color_slot. This patch covers all of the
remaining similar constructs.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Continue where ae021d87 (use skip_prefix to avoid magic numbers) left off
and use skip_prefix() in more places for determining the lengths of prefix
strings to avoid using dependent constants and other indirect methods.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we run `branch --merged`, we use prepare_revision_walk
with the merge-filter marked as UNINTERESTING. Any branch
tips that are marked UNINTERESTING after it returns must be
ancestors of that commit. As we iterate through the list of
refs to show, we check item->commit->object.flags to see
whether it was marked.
This interacts badly with --verbose, which will do a
separate walk to find the ahead/behind information for each
branch. There are two bad things that can happen:
1. The ahead/behind walk may get the wrong results,
because it can see a bogus UNINTERESTING flag leftover
from the merge-filter walk.
2. We may omit some branches if their tips are involved in
the ahead/behind traversal of a branch shown earlier.
The ahead/behind walk carefully cleans up its commit
flags, meaning it may also erase the UNINTERESTING
flag that we expect to check later.
We can solve this by moving the merge-filter state for each
ref into its "struct ref_item" as soon as we finish the
merge-filter walk. That fixes (2). Then we are free to clear
the commit flags we used in the walk, fixing (1).
Note that we actually do away with the matches_merge_filter
helper entirely here, and inline it between the revision
walk and the flag-clearing. This ensures that nobody
accidentally calls it at the wrong time (it is only safe to
check in that instant between the setting and clearing of
the global flag).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even the documentation tells us:
You should check if it returns any error (non-zero return
code) and if it does not, you can start using get_revision()
to do the iteration.
In preparation for this commit, I grepped all occurrences of
prepare_revision_walk and added error messages, when there were none.
Signed-off-by: Stefan Beller <stefanbeller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The skip_prefix() function returns a pointer to the content
past the prefix, or NULL if the prefix was not found. While
this is nice and simple, in practice it makes it hard to use
for two reasons:
1. When you want to conditionally skip or keep the string
as-is, you have to introduce a temporary variable.
For example:
tmp = skip_prefix(buf, "foo");
if (tmp)
buf = tmp;
2. It is verbose to check the outcome in a conditional, as
you need extra parentheses to silence compiler
warnings. For example:
if ((cp = skip_prefix(buf, "foo"))
/* do something with cp */
Both of these make it harder to use for long if-chains, and
we tend to use starts_with() instead. However, the first line
of "do something" is often to then skip forward in buf past
the prefix, either using a magic constant or with an extra
strlen(3) (which is generally computed at compile time, but
means we are repeating ourselves).
This patch refactors skip_prefix() to return a simple boolean,
and to provide the pointer value as an out-parameter. If the
prefix is not found, the out-parameter is untouched. This
lets you write:
if (skip_prefix(arg, "foo ", &arg))
do_foo(arg);
else if (skip_prefix(arg, "bar ", &arg))
do_bar(arg);
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make it clear that we don't use fnmatch() anymore.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove a few duplicate implementations of prefix/suffix comparison
functions, and rename them to starts_with and ends_with.
* cc/starts-n-ends-with:
replace {pre,suf}fixcmp() with {starts,ends}_with()
strbuf: introduce starts_with() and ends_with()
builtin/remote: remove postfixcmp() and use suffixcmp() instead
environment: normalize use of prefixcmp() by removing " != 0"
Leaving only the function definitions and declarations so that any
new topic in flight can still make use of the old functions, replace
existing uses of the prefixcmp() and suffixcmp() with new API
functions.
The change can be recreated by mechanically applying this:
$ git grep -l -e prefixcmp -e suffixcmp -- \*.c |
grep -v strbuf\\.c |
xargs perl -pi -e '
s|!prefixcmp\(|starts_with\(|g;
s|prefixcmp\(|!starts_with\(|g;
s|!suffixcmp\(|ends_with\(|g;
s|suffixcmp\(|!ends_with\(|g;
'
on the result of preparatory changes in this series.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/robustify-parse-commit:
checkout: do not die when leaving broken detached HEAD
use parse_commit_or_die instead of custom message
use parse_commit_or_die instead of segfaulting
assume parse_commit checks for NULL commit
assume parse_commit checks commit->object.parsed
log_tree_diff: die when we fail to parse a commit
Commit f2e0873 (branch: report invalid tracking branch as gone) removed
an early return from fill_tracking_info() in the path taken when 'git
branch -v' lists a branch in sync with its upstream. This resulted in an
unconditionally added space in front of the subject line:
$ git branch -v
* master f5eb3da commit pushed to upstream
topic f935eb6 unpublished topic
Instead, only add the trailing space if a decoration have been added.
To catch this kind of whitespace breakage in the tests, be a bit less
smart when filtering the output through sed.
Signed-off-by: Torstein Hegge <hegge@resisty.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The parse_commit function will check whether it was passed a
NULL commit pointer, and if so, return an error. There is no
need for callers to check this separately.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git branch -v -v" (and "git status") did not distinguish among a
branch that does not build on any other branch, a branch that is in
sync with the branch it builds on, and a branch that is configured
to build on some other branch that no longer exists.
* jx/branch-vv-always-compare-with-upstream:
status: always show tracking branch even no change
branch: report invalid tracking branch as gone
Command "git branch -vv" will report tracking branches, but invalid
tracking branches are also reported. This is because the function
stat_tracking_info() can not distinguish invalid tracking branch
from other cases which it would not like to report, such as
there is no upstream settings at all, or nothing is changed between
one branch and its upstream.
Junio suggested missing upstream should be reported [1] like:
$ git branch -v -v
master e67ac84 initial
* topic 3fc0f2a [topicbase: gone] topic
$ git status
# On branch topic
# Your branch is based on 'topicbase', but the upstream is gone.
# (use "git branch --unset-upstream" to fixup)
...
$ git status -b -s
## topic...topicbase [gone]
...
In order to do like that, we need to distinguish these three cases
(i.e. no tracking, with configured but no longer valid tracking, and
with tracking) in function stat_tracking_info(). So the refactored
function stat_tracking_info() has three return values: -1 (with "gone"
base), 0 (no base), and 1 (with base).
If the caller does not like to report tracking info when nothing
changed between the branch and its upstream, simply checks if
num_theirs and num_ours are both 0.
[1]: http://thread.gmane.org/gmane.comp.version-control.git/231830/focus=232288
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that the variables are set by OPT_BOOL, which makes sure
to have the values being 0 or 1 after parsing, we do not need
the double negation to map any other value to 1 for integer
variables.
Signed-off-by: Stefan Beller <stefanbeller@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This task emerged from b04ba2bb (parse-options: deprecate OPT_BOOLEAN,
2011-09-27). All occurrences of the respective variables have
been reviewed and none of them relied on the counting up mechanism,
but all of them were using the variable as a true boolean.
This patch does not change semantics of any command intentionally.
Signed-off-by: Stefan Beller <stefanbeller@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise when using 'git branch -vv' it's hard to see them among so
much output.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git branch -m" without any argument noticed an error, but with an
incorrect error message.
* jm/branch-rename-nothing-error:
branch: give better message when no names specified for rename
Add a bit more information to "git status" during a rebase/bisect
session.
* nd/branch-show-rebase-bisect-state:
status, branch: fix the misleading "bisecting" message
branch: show more information when HEAD is detached
status: show more info than "currently not on any branch"
wt-status: move wt_status_get_state() out to wt_status_print()
wt-status: split wt_status_state parsing function out
wt-status: move strbuf into read_and_strip_branch()
The current message is "bisecting %s" (or "bisecting branch %s").
"%s" is the current branch when we started bisecting. Clarify that to
avoid confusion with good and bad refs passed to "bisect" command.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git branch" had more cases where it did not bother to check
nonsense command line parameters.
* nd/branch-error-cases:
branch: segfault fixes and validation
This prints more helpful info when HEAD is detached: is it detached
because of bisect or rebase? What is the original branch name in those
cases? Is it detached because the user checks out a remote ref or a
tag (and which one)?
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
branch_get() can return NULL (so far on detached HEAD only) but some
code paths in builtin/branch.c cannot deal with that and cause
segfaults.
While at there, make sure to bail out when the user gives 2 or more
branches with --set-upstream-to or --unset-upstream, where only the
first branch is processed and the rest silently dropped.
Reported-by: Per Cederqvist <cederp@opera.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix various error messages and conditions in "git branch", e.g. we
advertised "branch -d/-D" to remove one or more branches but actually
implemented removal of zero or more branches---request to remove no
branches was not rejected.
* nd/branch-error-cases:
branch: let branch filters imply --list
docs: clarify git-branch --list behavior
branch: mark more strings for translation
branch: give a more helpful message on redundant arguments
branch: reject -D/-d without branch name
Allow a configuration variable core.commentchar to customize the
character used to comment out the hint lines in the edited text from
the default '#'.
* jc/custom-comment-char:
Allow custom "comment char"
Attempt to "branch --edit-description" an existing branch, while
being on a detached HEAD, errored out.
* nd/edit-branch-desc-while-detached:
branch: no detached HEAD check when editing another branch's description
Currently, a branch filter like `--contains`, `--merged`, or
`--no-merged` is ignored when we are not in listing mode.
For example:
git branch --contains=foo bar
will create the branch "bar" from the current HEAD, ignoring
the `--contains` argument entirely. This is not very
helpful. There are two reasonable behaviors for git here:
1. Flag an error; the arguments do not make sense.
2. Implicitly go into `--list` mode
This patch chooses the latter, as it is more convenient, and
there should not be any ambiguity with attempting to create
a branch; using `--contains` and not wanting to list is
nonsensical.
That leaves the case where an explicit modification option
like `-d` is given. We already catch the case where
`--list` is given alongside `-d` and flag an error. With
this patch, we will also catch the use of `--contains` and
other filter options alongside `-d`.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some users do want to write a line that begin with a pound sign, #,
in their commit log message. Many tracking system recognise
a token of #<bugid> form, for example.
The support we offer these use cases is not very friendly to the end
users. They have a choice between
- Don't do it. Avoid such a line by rewrapping or indenting; and
- Use --cleanup=whitespace but remove all the hint lines we add.
Give them a way to set a custom comment char, e.g.
$ git -c core.commentchar="%" commit
so that they do not have to do either of the two workarounds.
[jc: although I started the topic, all the tests and documentation
updates, many of the call sites of the new strbuf_add_commented_*()
functions, and the change to git-submodule.sh scripted Porcelain are
from Ralf.]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach various forms of "format-patch" command line to identify what
branch the patches are taken from, so that the branch description
is picked up in more cases.
* nd/maint-branch-desc-doc:
format-patch: pick up branch description when no ref is specified
format-patch: pick up correct branch name from symbolic ref
t4014: a few more tests on cover letter using branch description
branch: delete branch description if it's empty
config.txt: a few lines about branch.<name>.description
git branch reports the abbreviated hash of the head commit of
a deleted branch to make it easier for a user to undo the
operation. For symref branches this doesn't help. Print the
symref target instead for them.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before a branch is deleted, we check that it points to a valid
commit. With -d we also check that the commit is a merged; this
check is not done with -D.
The reason for that is that commits pointed to by branches should
never go missing; if they do then something broke and it's better
to stop instead of adding to the mess. And a non-merged commit
may contain changes that are worth preserving, so we require the
stronger option -D instead of -d to get rid of them.
If a branch consists of a symref, these concerns don't apply.
Deleting such a branch can't make a commit become unreferenced,
so we don't need to check if it is merged, or even if it is
actually a valid commit. Skip them in that case. This allows
us to delete dangling symref branches.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a branch that is to be deleted happens to be a symref to another
branch, the current code removes the targeted branch instead of the
one it was called for.
Change this surprising behaviour and delete the symref branch
instead.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Provide a small helper function for deleting branch config sections.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the code to perform checks on the tip commit of a branch
to its own function.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* rj/path-cleanup:
Call mkpathdup() rather than xstrdup(mkpath(...))
Call git_pathdup() rather than xstrdup(git_path("..."))
path.c: Use vsnpath() in the implementation of git_path()
path.c: Don't discard the return value of vsnpath()
path.c: Remove the 'git_' prefix from a file scope function
Optimise the "merge-base" computation a bit, and also update its
users that do not need the full merge-base information to call a
cheaper subset.
* jc/merge-bases:
reduce_heads(): reimplement on top of remove_redundant()
merge-base: "--is-ancestor A B"
get_merge_bases_many(): walk from many tips in parallel
in_merge_bases(): use paint_down_to_common()
merge_bases_many(): split out the logic to paint history
in_merge_bases(): omit unnecessary redundant common ancestor reduction
http-push: use in_merge_bases() for fast-forward check
receive-pack: use in_merge_bases() for fast-forward check
in_merge_bases(): support only one "other" commit
"git branch --set-upstream origin/master" is a common mistake to
create a local branch 'origin/master' and set it to integrate with
the current branch. With a plan to deprecate this option, introduce
"git branch (-u|--set-upstream-to) origin/master" that sets the
current branch to integrate with 'origin/master' remote tracking
branch.
* cn/branch-set-upstream-to:
branch: deprecate --set-upstream and show help if we detect possible mistaken use
branch: add --unset-upstream option
branch: introduce --set-upstream-to
Output from "git branch -v" contains "(no branch)" that could be
localized, but the code to align it along with the names of branches
were counting in bytes, not in display columns.
* nd/branch-v-alignment:
branch -v: align even when branch names are in UTF-8
In addition to updating the xstrdup(mkpath(...)) call sites with
mkpathdup(), we also fix a memory leak (in merge_3way()) caused by
neglecting to free the memory allocated to the 'base_name' variable.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This interface is error prone, and a better one (--set-upstream-to)
exists. Add a message listing the alternatives and suggest how to fix
a --set-upstream invocation in case the user only gives one argument
which causes a local branch with the same name as a remote-tracking
one to be created. The typical case is
git branch --set-upstream origin/master
when the user meant
git branch --set-upstream master origin/master
assuming that the current branch is master. Show a message telling the
user how to undo their action and get what they wanted. For the
command above, the message would be
The --set-upstream flag is deprecated and will be removed. Consider using --track or --set-upstream-to
Branch origin/master set up to track local branch master.
If you wanted to make 'master' track 'origin/master', do this:
git branch -d origin/master
git branch --set-upstream-to origin/master
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have ways of setting the upstream information, but if we want to
unset it, we need to resort to modifying the configuration manually.
Teach branch an --unset-upstream option that unsets this information.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In early days of its life, I planned to make it possible to compute
"is a commit contained in all of these other commits?" with this
function, but it turned out that no caller needed it.
Just make it take two commit objects and add a comment to say what
these two functions do.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Branch names are usually in ASCII so they are not the problem. The
problem most likely comes from "(no branch)" translation, which is
in UTF-8 and makes display-width calculation just wrong. Clarify
this by renaming the field "len" in struct ref_item to "width", as
it stores the display-width and is used to compute the width of the
screen needed to show the names of all the branches, and compute the
display width using utf8_strwidth(), not byte-length with strlen().
Update document to mention the fact that we may want ref names in
UTF-8. Encodings that produce invalid UTF-8 are safe as utf8_strwidth()
falls back to strlen(). The ones that incidentally produce valid UTF-8
sequences will cause misalignment.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The existing --set-uptream option can cause confusion, as it uses the
usual branch convention of assuming a starting point of HEAD if none
is specified, causing
git branch --set-upstream origin/master
to create a new local branch 'origin/master' that tracks the current
branch. As --set-upstream already exists, we can't simply change its
behaviour. To work around this, introduce --set-upstream-to which
accepts a compulsory argument indicating what the new upstream branch
should be and one optinal argument indicating which branch to change,
defaulting to HEAD.
The new options allows us to type
git branch --set-upstream-to origin/master
to set the current branch's upstream to be origin's master.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A couple of commands learn --column option to produce columnar output.
By Nguyễn Thái Ngọc Duy (9) and Zbigniew Jędrzejewski-Szmek (1)
* nd/columns:
tag: add --column
column: support piping stdout to external git-column process
status: add --column
branch: add --column
help: reuse print_columns() for help -a
column: add dense layout support
t9002: work around shells that are unable to set COLUMNS to 1
column: add columnar layout
Stop starting pager recursively
Add column layout skeleton and git-column
Many error/warning messages had extra trailing newlines that are
unnecessary.
By Pete Wyckoff
* pw/message-cleanup:
remove blank filename in error message
remove superfluous newlines in error messages
The error handling routines add a newline. Remove
the duplicate ones in error messages.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of making translators translate "remote " and then using
"%sbranch" where "%s" is either "remote " or "" just split the two up
into separate messages. This makes the translation of this section of
git-branch much less confusing.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's currently no way to suppress the informational
"deleted branch..." or "set up tracking..." messages. This
patch provides a "-q" option to do so.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Like the "switched to..." message (which is already
suppressed by "-q"), this message is purely informational.
Let's silence it if the user asked us to be quiet.
This patch is slightly more than a one-liner, because we
have to teach create_branch to propagate the flag all the
way down to install_branch_config.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
print_ref_list looks up the merge_filter_ref and assumes that a valid
pointer is returned. When the object doesn't exist, it tries to
dereference a NULL pointer. This can be the case when git branch
--merged is given an argument that isn't a valid commit name.
Check whether the lookup returns a NULL pointer and die with an error
if it does. Add a test, while we're at it.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is very easy to mistype the branch name when editing its description,
e.g.
$ git checkout -b my-topic master
: work work work
: now we are at a good point to switch working something else
$ git checkout master
: ah, let's write it down before we forget what we were doing
$ git branch --edit-description my-tpoic
The command does not notice that branch 'my-tpoic' does not exist. It is
not lost (it becomes description of an unborn my-tpoic branch), but is not
very useful. So detect such a case and error out to reduce the grief
factor from this common mistake.
This incidentally also errors out --edit-description when the HEAD points
at an unborn branch (immediately after "init", or "checkout --orphan"),
because at that point, you do not even have any commit that is part of
your history and there is no point in describing how this particular
branch is different from the branch it forked off of, which is the useful
bit of information the branch description is designed to capture.
We may want to special case the unborn case later, but that is outside the
scope of this patch to prevent more common mistakes before 1.7.9 series
gains too much widespread use.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* nd/resolve-ref:
Rename resolve_ref() to resolve_ref_unsafe()
Convert resolve_ref+xstrdup to new resolve_refdup function
revert: convert resolve_ref() to read_ref_full()
resolve_ref() may return a pointer to a shared buffer and can be
overwritten by the next resolve_ref() calls. Callers need to
pay attention, not to keep the pointer when the next call happens.
Rename with "_unsafe" suffix to warn developers (or reviewers) before
introducing new call sites.
This patch is generated using the following command
git grep -l 'resolve_ref(' -- '*.[ch]'|xargs sed -i 's/resolve_ref(/resolve_ref_unsafe(/g'
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* nd/resolve-ref:
Copy resolve_ref() return value for longer use
Convert many resolve_ref() calls to read_ref*() and ref_exists()
Conflicts:
builtin/fmt-merge-msg.c
builtin/merge.c
refs.c
* jc/request-pull-show-head-4:
request-pull: use the annotated tag contents
fmt-merge-msg.c: Fix an "dubious one-bit signed bitfield" sparse error
environment.c: Fix an sparse "symbol not declared" warning
builtin/log.c: Fix an "Using plain integer as NULL pointer" warning
fmt-merge-msg: use branch.$name.description
request-pull: use the branch description
request-pull: state what commit to expect
request-pull: modernize style
branch: teach --edit-description option
format-patch: use branch description in cover letter
branch: add read_branch_desc() helper function
Conflicts:
builtin/branch.c
resolve_ref() may return a pointer to a static buffer. Callers that
use this value longer than a couple of statements should copy the
value to avoid some hidden resolve_ref() call that may change the
static buffer's value.
The bug found by Tony Wang <wwwjfy@gmail.com> in builtin/merge.c
demonstrates this. The first call is in cmd_merge()
branch = resolve_ref("HEAD", head_sha1, 0, &flag);
Then deep in lookup_commit_or_die() a few lines after, resolve_ref()
may be called again and destroy "branch".
lookup_commit_or_die
lookup_commit_reference
lookup_commit_reference_gently
parse_object
lookup_replace_object
do_lookup_replace_object
prepare_replace_object
for_each_replace_ref
do_for_each_ref
get_loose_refs
get_ref_dir
get_ref_dir
resolve_ref
All call sites are checked and made sure that xstrdup() is called if
the value should be saved.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When on master, "git checkout -B master <commit>" is a more natural way to
say "git reset --keep <commit>", which was originally invented for the
exact purpose of moving to the named commit while keeping the local changes
around.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Overwriting the current branch with a different commit is forbidden, as it
will make the status recorded in the index and the working tree out of
sync with respect to the HEAD. There however is no reason to forbid it if
the current branch is renamed to itself, which admittedly is something
only an insane user would do, but is handy for scripts.
Test script is by Conrad Irwin.
Reported-by: Soeren Sonnenburg <sonne@debian.org>
Reported-by: Josh Chia (谢任中)
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Conrad Irwin <conrad.irwin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The option --force should not put us in 'create branch' mode. The
fact that this option is only valid in 'create branch' mode is
already caught by the the next 'if' in which we assure that we
are in the correct mode.
Without this patch, "git branch -f" without any other argument ends
up calling create_branch without any branch name.
Signed-off-by: Vincent van Ravesteijn <vfr@lyx.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
resolve_ref() may return a pointer to a static buffer, which is not
safe for long-term use because if another resolve_ref() call happens,
the buffer may be changed. Many call sites though do not care about
this buffer. They simply check if the return value is NULL or not.
Convert all these call sites to new wrappers to reduce resolve_ref()
calls from 57 to 34. If we change resolve_ref() prototype later on
to avoid passing static buffer out, this helps reduce changes.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Modify the option parsing heuristic to handle all -m (rename) cases,
including the no-arg case.
Previously, this "fell through" to the (argc <= 2) case and caused
segfault.
Reported-by: Stefan Näwe <stefan.naewe@atlas-elektronik.com>
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using branch.$name.description as the configuration key, give users a
place to write about what the purpose of the branch is and things like
that, so that various subsystems, e.g. "push -s", "request-pull", and
"format-patch --cover-letter", can later be taught to use this
information.
The "-m" option similar to "commit/tag" is deliberately omitted, as the
whole point of branch description is about giving descriptive information
(the name of the branch itself is a better place for information that fits
on a single-line).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mg/branch-list:
t3200: clean up checks for file existence
branch: -v does not automatically imply --list
branch: allow pattern arguments
branch: introduce --list option
git-branch: introduce missing long forms for the options
git-tag: introduce long forms for the options
t6040: test branch -vv
Conflicts:
Documentation/git-tag.txt
t/t3200-branch.sh
The "git branch" command, while not in listing mode, calls create_branch()
even when the target branch already exists, and it does so even when it is
not interested in updating the value of the branch (i.e. the name of the
commit object that sits at the tip of the existing branch). This happens
when the command is run with "--set-upstream" option.
The earlier safety-measure to prevent "git branch -f $branch $commit" from
updating the currently checked out branch did not take it into account,
and we no longer can update the tracking information of the current branch.
Minimally fix this regression by telling the validation code if it is
called to really update the value of a potentially existing branch, or if
the caller merely is interested in updating auxiliary aspects of a branch.
Reported-and-Tested-by: Jay Soffian
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"branch -v" without other options or parameters still works in the list
mode, but that is not because there is "-v" but because there is no
parameter nor option.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow pattern arguments for the list mode just like for git tag -l.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, there is no way to invoke the list mode explicitly, without
giving -v to force verbose output.
Introduce a --list option which invokes the list mode. This will be
beneficial for invoking list mode with pattern matching, which otherwise
would be interpreted as branch creation.
Along with --list, test also combinations of existing options.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Long forms are better to memorize and more reliably uniform across
commands.
Names follow precedents, e.g. "git log --remotes".
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/color-and-pager:
want_color: automatically fallback to color.ui
diff: don't load color config in plumbing
config: refactor get_colorbool function
color: delay auto-color decision until point of use
git_config_colorbool: refactor stdout_is_tty handling
diff: refactor COLOR_DIFF from a flag into an int
setup_pager: set GIT_PAGER_IN_USE
t7006: use test_config helpers
test-lib: add helper functions for config
t7006: modernize calls to unset
Conflicts:
builtin/commit.c
parse-options.c
