When testing a fast-forward merge with git-pull, check to see if the
reflog action is "pull" with the arguments passed to git-pull.
While we are in the vicinity, remove the empty line as well.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 19a7fcb (allow pull --rebase on branch yet to be born,
2009-08-11) special cases git-pull on an unborn branch in a different
code path such that git-pull --rebase is still valid even though there
is no HEAD yet.
This code path still ensures that there is no index in order not to lose
any staged changes. Implement a test to ensure that this check is
triggered.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since rebasing on top of multiple upstream branches does not make sense,
since 51b2ead (disallow providing multiple upstream branches to rebase,
pull --rebase, 2009-02-18), git-pull explicitly disallowed specifying
multiple branches in the rebase case.
Implement tests to ensure that git-pull fails and prints out the
user-friendly error message in such a case.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since b10ac50 (Fix pulling into the same branch., 2005-08-25), git-pull,
upon detecting that git-fetch updated the current head, will
fast-forward the working tree to the updated head commit.
Implement tests to ensure that the fast-forward occurs in such a case,
as well as to ensure that the user-friendly advice is printed upon
failure.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit d38a30d (Be more user-friendly when refusing to do something
because of conflict., 2010-01-12) introduced code paths to git-pull
which will error out with user-friendly advices if the user is in the
middle of a merge or has unmerged files.
Implement tests to ensure that git-pull will not run, and will print
these advices, if the user is in the middle of a merge or has unmerged
files in the index.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
a8c9bef (pull: improve advice for unconfigured error case, 2009-10-05)
fully established the current advices given by git-pull for the
different cases where git-fetch will not have anything marked for merge:
1. We fetched from a specific remote, and a refspec was given, but it
ended up not fetching anything. This is usually because the user
provided a wildcard refspec which had no matches on the remote end.
2. We fetched from a non-default remote, but didn't specify a branch to
merge. We can't use the configured one because it applies to the
default remote, and thus the user must specify the branches to merge.
3. We fetched from the branch's or repo's default remote, but:
a. We are not on a branch, so there will never be a configured branch
to merge with.
b. We are on a branch, but there is no configured branch to merge
with.
4. We fetched from the branch's or repo's default remote, but the
configured branch to merge didn't get fetched (either it doesn't
exist, or wasn't part of the configured fetch refspec)
Implement tests for the above 5 cases to ensure that the correct code
paths are triggered for each of these cases.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many tests in t5520 used the following to test the contents of files:
test `cat file` = expected
or
test $(cat file) = expected
These 2 forms, however, will be affected by field splitting and,
depending on the value of $IFS, may be split into multiple arguments,
making the test fail in mysterious ways.
Replace the above 2 forms with:
test "$(cat file)" = expected
as quoting the command substitution will prevent field splitting.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code comment for "git merge" in builtin/merge.c, we say
If the merged head is a valid one there is no reason
to forbid "git merge" into a branch yet to be born.
We do the same for "git pull".
and t5520 does have an existing test for that behaviour. However,
there was no test to make sure that 'git pull' to pull multiple
branches into an unborn branch must fail.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix style funnies in early part of this test script that checks "git
pull" into an unborn branch. The primary change is that 'chdir' to
a newly created empty test repository is now protected by being done
in a subshell to make it more robust without having to chdir back to
the original place.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a user is working on master, and has merged in their feature branch, but now
has to "git pull" because master moved, with pull.rebase their feature branch
will be flattened into master.
This is because "git pull" currently does not know about rebase's preserve
merges flag, which would avoid this behavior, as it would instead replay just
the merge commit of the feature branch onto the new master, and not replay each
individual commit in the feature branch.
Add a --rebase=preserve option, which will pass along --preserve-merges to
rebase.
Also add 'preserve' to the allowed values for the pull.rebase config setting.
Signed-off-by: Stephen Haberman <stephen@exigencecorp.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git pull" into nothing trashed "local changes" that were in the
index, and this avoids it.
* jk/pull-into-dirty-unborn:
pull: merge into unborn by fast-forwarding from empty tree
pull: update unborn branch tip after index
The logic for pulling into an unborn branch was originally
designed to be used on a newly-initialized repository
(d09e79c, git-pull: allow pulling into an empty repository,
2006-11-16). It thus did not initially deal with
uncommitted changes in the unborn branch. The case of an
_unstaged_ untracked file was fixed by 4b3ffe5 (pull: do not
clobber untracked files on initial pull, 2011-03-25).
However, it still clobbered existing staged files, both when
the file exists in the merged commit (it will be
overwritten), and when it does not (it will be deleted).
We fix this by doing a two-way merge, where the "current"
side of the merge is an empty tree, and the "target" side is
HEAD (already updated to FETCH_HEAD at this point). This
amounts to claiming that all work in the index was done vs.
an empty tree, and thus all content of the index is
precious.
Note that this use of read-tree just gives us protection
against overwriting index and working tree changes. It will
not actually result in a 3-way merge conflict in the index.
This is fine, as this is a rare situation, and the conflict
would not be interesting anyway (it must, by definition, be
an add/add conflict with the whole content conflicting). And
it makes it simpler for the user to recover, as they have no
HEAD to "git reset" back to.
Reported-by: Stefan Schüßler <mail@stefanschuessler.de>
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Configuration from test_config does not last beyond the end of the
current test assertion, making each test easier to think about in
isolation.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using construct such as:
test_when_finished "git config --unset <key>"
git config <key> <value>
uses
test_config <key> <value>
The latter takes care of removing <key> at the end of the test.
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently we either need to set branch.<name>.rebase for existing
branches if we'd like "git pull" to mean "git pull --rebase", or have
the forethought of setting "branch.autosetuprebase" before we create
the branch.
Introduce a "pull.rebase" option to globally configure "git pull" to
mean "git pull --rebase" for any branch.
This option will be considered at a lower priority than
branch.<name>.rebase, i.e. we could set pull.rebase=true and
branch.<name>.rebase=false and the latter configuration option would
win.
Reviewed-by: Sverre Rabbelier <srabbelier@gmail.com>
Reviewed-by: Fernando Vezzosi <buccia@repnz.net>
Reviewed-by: Eric Herman <eric@freesa.org>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Liked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For a pull into an unborn branch, we do not use "git merge"
at all. Instead, we call read-tree directly. However, we
used the --reset parameter instead of "-m", which turns off
the safety features.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since c85c792 (pull --rebase: be cleverer with rebased upstream
branches, 2008-01-26), "git pull --rebase" has used the reflog to try to
rebase from the old upstream onto the new upstream.
Make this work if the local repository is explicitly passed on the
command line as in 'git pull --rebase . foo'.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Acked-by: Santi Béjar <santi@agolina.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prior to c85c792 (pull --rebase: be cleverer with rebased upstream
branches, 2008-01-26), pull --rebase would run
git rebase $merge_head
which resulted in a call to
git format-patch ... --ignore-if-in-upstream $merge_head..$cur_branch
This resulted in patches from $merge_head..$cur_branch being applied, as
long as they did not already exist in $cur_branch..$merge_head.
Unfortunately, when upstream is rebased, $merge_head..$cur_branch also
refers to "old" commits that have already been rebased upstream, meaning
that many patches that were already fixed upstream would be reapplied.
This could result in many spurious conflicts, as well as reintroduce
patches that were intentionally dropped upstream.
So the algorithm was changed in c85c792 (pull --rebase: be cleverer with
rebased upstream branches, 2008-01-26) and d44e712 (pull: support rebased
upstream + fetch + pull --rebase, 2009-07-19). Defining $old_remote_ref to
be the most recent entry in the reflog for @{upstream} that is an ancestor
of $cur_branch, pull --rebase was changed to run
git rebase --onto $merge_head $old_remote_ref
which results in a call to
git format-patch ... --ignore-if-in-upstream $old_remote_ref..$cur_branch
The whole point of this change was to reduce the number of commits being
reapplied, by avoiding commits that upstream already has or had.
In the rebased upstream case, this change achieved that purpose. It is
worth noting, though, that since $old_remote_ref is always an ancestor of
$cur_branch (by its definition), format-patch will not know what upstream
is and thus will not be able to determine if any patches are already
upstream; they will all be reapplied.
In the non-rebased upstream case, this new form is usually the same as the
original code but in some cases $old_remote_ref can be an ancestor of
$(git merge-base $merge_head $cur_branch)
meaning that instead of avoiding reapplying commits that upstream already
has, it actually includes more such commits. Combined with the fact that
format-patch can no longer detect commits that are already upstream (since
it is no longer told what upstream is), results in lots of confusion for
users (e.g. "git is giving me lots of conflicts in stuff I didn't even
change since my last push.")
Cases where additional commits could be reapplied include forking from a
commit other than the tracking branch, or amending/rebasing after pushing.
Cases where the inability to detect upstreamed commits cause problems
include independent discovery of a fix and having your patches get
upstreamed by some alternative route (e.g. pulling your changes to a third
machine, pushing from there, and then going back to your original machine
and trying to pull --rebase).
Fix the non-rebased upstream case by ignoring $old_remote_ref whenever it
is contained in $(git merge-base $merge_head $cur_branch). This should
have no affect on the rebased upstream case.
Acked-by: Santi Béjar <santi@agolina.net>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In tests, call test_cmp rather than raw diff where possible (i.e. if
the output does not go to a pipe), to allow the use of, say, 'cmp'
when the default 'diff -u' is not compatible with a vendor diff.
When that is not possible, use $DIFF, as set in GIT-BUILD-OPTIONS.
Signed-off-by: Gary V. Vaughan <gary@thewrittenword.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When doing a "pull --rebase", we check to make sure that the index and
working tree are clean. The index-clean check compares the index against
HEAD. The test erroneously reports dirtiness if we don't have a HEAD yet.
In such an "unborn branch" case, by definition, a non-empty index won't
be based on whatever we are pulling down from the remote, and will lose
the local change. Just check if $GIT_DIR/index exists and error out.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
You cannot do a "git pull --rebase" with a rebased upstream, if you have
already run "git fetch". Try to behave as if the "git fetch" was not run.
In other words, find the fork point of the current branch, where
the tip of upstream branch used to be, and use it as the upstream
parameter of "git rebase".
This patch computes the fork point by walking the reflog to find the first
commit which is an ancestor of the current branch. Maybe there are
smarter ways to compute it, but this is a straight forward implementation.
Signed-off-by: Santi Béjar <santi@agolina.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If your upstream has rebased you can do:
git pull --rebase
but only if you haven't fetch before.
Mark this case as test_expect_failure, in a later patch it will be
changed to test_expect_success.
Signed-off-by: Santi Béjar <santi@agolina.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Expand get_remote_merge_branch to compute the tracking branch to merge
when called without arguments (or only the remote name). This allows
"git pull --rebase" without arguments (default upstream branch) to
work with a rebased upstream. With explicit arguments it already worked.
Also add a test to check for this case.
Signed-off-by: Santi Béjar <santi@agolina.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some misguided documents floating on the Net suggest this sequence:
mkdir newdir && cd newdir
git init
git remote add origin $url
git pull origin master:master
"git pull" has known about misguided "pull" that lets the underlying fetch
update the current branch for a long time. It also has known about
"git pull origin master" into a branch yet to be born.
These two workarounds however were not aware of the existence of each
other and did not work well together. This fixes it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When rebasing fails during "pull --rebase", you cannot just clean up the
working directory and call "pull --rebase" again, since the remote branch
was already fetched.
Therefore, die early when the working directory is dirty.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the upstream branch is tracked, we can detect if that branch
was rebased since it was last fetched. Teach git to use that
information to rebase from the old remote head onto the new remote head.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When calling 'git pull' with the '--rebase' option, it performs a
fetch + rebase instead of a fetch + merge.
This behavior is more desirable than fetch + pull when a topic branch
is ready to be submitted and needs to be update.
fetch + rebase might also be considered a better workflow with shared
repositories in any case, or for contributors to a centrally managed
repository, such as WINE's.
As a convenience, you can set the default behavior for a branch by
defining the config variable branch.<name>.rebase, which is
interpreted as a bool. This setting can be overridden on the command
line by --rebase and --no-rebase.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This uses "git-apply --whitespace=strip" to fix whitespace errors that have
crept in to our source files over time. There are a few files that need
to have trailing whitespaces (most notably, test vectors). The results
still passes the test, and build result in Documentation/ area is unchanged.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch adds support for a dummy remote '.' to avoid having
to declare a fake remote like
[remote "local"]
url = .
fetch = refs/heads/*:refs/heads/*
Such a builtin remote simplifies the operation of "git-fetch",
which will populate FETCH_HEAD but will not pretend that two
repositories are in use, will not create a thin pack, and will
not perform any useless remapping of names. The speed
improvement is around 20%, and it should improve more if
"git-fetch" is converted to a builtin.
To this end, git-parse-remote is grown with a new kind of
remote, 'builtin'. In git-fetch.sh, we treat the builtin remote
specially in that it needs no pack/store operations. In fact,
doing git-fetch on a builtin remote will simply populate
FETCH_HEAD appropriately.
The patch also improves of the --track/--no-track support,
extending it so that branch.<name>.remote items referring '.'
can be created. Finally, it fixes a typo in git-checkout.sh.
Signed-off-by: Paolo Bonzini <bonzini@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
While 'init-db' still is and probably will always remain a valid git
command for obvious backward compatibility reasons, it would be a good
idea to move shipped tools and docs to using 'init' instead.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We used to complain that we cannot merge anything we fetched
with a local branch that does not exist yet. Just treat the
case as a natural extension of fast forwarding and make the
local branch'es tip point at the same commit we just fetched.
After all an empty repository without an initial commit is an
ancestor of any commit.
[jc: I added a trivial test. We've become sloppy but we should
stick to the discipline of covering new behaviour with new
tests. ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
