The section added in e76eec3554 (ci: allow per-branch config for
GitHub Actions, 2020-05-07) contains a `&&`-chain that connects several
commands. The first command is actually so long that it stretches over
multiple lines, and as per usual, the continuation lines are indented one
more level than the first.
However, the subsequent commands in the `&&`-chain were also indented
one more level than the first command, which was almost certainly
unintended.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch fixes a bug where xrealloc(ptr, 0) can double-free and
corrupt the heap on some platforms (including at least glibc).
The C99 standard says of malloc (section 7.20.3):
If the size of the space requested is zero, the behavior is
implementation-defined: either a null pointer is returned, or the
behavior is as if the size were some nonzero value, except that the
returned pointer shall not be used to access an object.
So we might get NULL back, or we might get an actual pointer (but we're
not allowed to look at its contents). To simplify our code, our
xmalloc() handles a NULL return by converting it into a single-byte
allocation. That way callers get consistent behavior. This was done way
back in 4e7a2eccc2 (?alloc: do not return NULL when asked for zero
bytes, 2005-12-29).
We also gave xcalloc() and xrealloc() the same treatment. And according
to C99, that is fine; the text above is in a paragraph that applies to
all three. But what happens to the memory we passed to realloc() in such
a case? I.e., if we do:
ret = realloc(ptr, 0);
and "ptr" is non-NULL, but we get NULL back, is "ptr" still valid? C99
doesn't cover this case specifically, but says (section 7.20.3.4):
The realloc function deallocates the old object pointed to by ptr and
returns a pointer to a new object that has the size specified by size.
So "ptr" is now deallocated, and we must only look at "ret". And since
"ret" is NULL, that means we have no allocated object at all. But that's
not quite the whole story. It also says:
If memory for the new object cannot be allocated, the old object is
not deallocated and its value is unchanged.
[...]
The realloc function returns a pointer to the new object (which may
have the same value as a pointer to the old object), or a null pointer
if the new object could not be allocated.
So if we see a NULL return with a non-zero size, we can expect that the
original object _is_ still valid. But with a non-zero size, it's
ambiguous. The NULL return might mean a failure (in which case the
object is valid), or it might mean that we successfully allocated
nothing, and used NULL to represent that.
The glibc manpage for realloc() explicitly says:
[...]if size is equal to zero, and ptr is not NULL, then the call is
equivalent to free(ptr).
Likewise, this StackOverflow answer:
https://stackoverflow.com/a/2135302
claims that C89 gave similar guidance (but I don't have a copy to verify
it). A comment on this answer:
https://stackoverflow.com/a/2022410
claims that Microsoft's CRT behaves the same.
But our current "retry with 1 byte" code passes the original pointer
again. So on glibc, we effectively free() the pointer and then try to
realloc() it again, which is undefined behavior.
The simplest fix here is to just pass "ret" (which we know to be NULL)
to the follow-up realloc(). But that means that a system which _doesn't_
free the original pointer would leak it. It's not clear if any such
systems exist, and that interpretation of the standard seems unlikely
(I'd expect a system that doesn't deallocate to simply return the
original pointer in this case). But it's easy enough to err on the safe
side, and just never pass a zero size to realloc() at all.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In fde97d8ac6 (Update documentation to remove incorrect GIT_DIFF_OPTS
example., 2006-11-27), the description of the 'GIT_EXTERNAL_DIFF'
variable was moved from 'diff-format.txt' to 'git.txt', and the
documentation was updated to remove a 'diff(1)' invocation since Git did
not use an external diff program anymore by default.
However, the description of 'GIT_EXTERNAL_DIFF' still mentions "instead
of the diff invocation described above", which is confusing.
Correct that outdated sentence.
Also, link to git(1) in 'diff-generate-patch.txt' when GIT_DIFF_OPTS and
GIT_EXTERNAL_DIFF are mentioned, so that users can easily know what
these variables are about.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Feeding "$ZERO_OID" to "git log --ignore-missing --stdin", and
running "git log --ignore-missing $ZERO_OID" fell back to start
digging from HEAD; it has been corrected to become a no-op, like
"git log --tags=no-tag-matches-this-pattern" does.
* jk/rev-input-given-fix:
revision: set rev_input_given in handle_revision_arg()
The description of --cached/--index options in "git apply --help"
has been updated.
* rp/apply-cached-doc:
git-apply.txt: update descriptions of --cached, --index
"git restore/checkout --no-overlay" with wildcarded pathspec
mistakenly removed matching paths in subdirectories, which has been
corrected.
* rs/checkout-no-overlay-pathspec-fix:
checkout, restore: make pathspec recursive
Accesses to two pseudorefs have been updated to properly use ref
API.
* hn/refs-pseudorefs:
sequencer: treat REVERT_HEAD as a pseudo ref
builtin/commit: suggest update-ref for pseudoref removal
sequencer: treat CHERRY_PICK_HEAD as a pseudo ref
refs: make refs_ref_exists public
Long ago, we decided to use 3 threads by default when running the
index-pack task in parallel, which has been adjusted a bit upwards.
* jk/index-pack-w-more-threads:
index-pack: adjust default threading cap
p5302: count up to online-cpus for thread tests
p5302: disable thread-count parameter tests by default
The parser for "git for-each-ref --format=..." was too loose when
parsing the "%(trailers...)" atom, and forgot that "trailers" and
"trailers:<modifiers>" are the only two allowed forms, which has
been corrected.
* hv/ref-filter-trailers-atom-parsing-fix:
ref-filter: 'contents:trailers' show error if `:` is missing
t6300: unify %(trailers) and %(contents:trailers) tests
Updates into a lazy/partial clone with a submodule did not work
well with transfer.fsckobjects set.
* jt/promisor-pack-fix:
fetch-pack: in partial clone, pass --promisor
The output from the "diff" family of the commands had abbreviated
object names of blobs involved in the patch, but its length was not
affected by the --abbrev option. Now it is.
* dd/diff-customize-index-line-abbrev:
diff: index-line: respect --abbrev in object's name
t4013: improve diff-post-processor logic
Add separate 'match_missing' field for diff-index to use and set it when we
encounter "-m" option. This field won't then be cleared when another meaning of
"-m" is reverted (e.g., by "--no-diff-merges"), nor it will be affected by
future option(s) that might drive 'ignore_merges' field.
Use this new field from diff-lib:do_oneway_diff() instead of reusing
'ignore_merges' field.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The intention of `git init --separate-work-dir=<path>` is to move the
.git/ directory to a location outside of the main worktree. When used
within a linked worktree, however, rather than moving the .git/
directory as intended, it instead incorrectly moves the worktree's
.git/worktrees/<id> directory to <path>, thus disconnecting the linked
worktree from its parent repository and breaking the worktree in the
process since its local .git file no longer points at a location at
which it can find the object database. Fix this broken behavior.
An intentional side-effect of this change is that it also closes a
loophole not caught by ccf236a23a (init: disallow --separate-git-dir
with bare repository, 2020-08-09) in which the check to prevent
--separate-git-dir being used in conjunction with a bare repository was
unable to detect the invalid combination when invoked from within a
linked worktree. Therefore, add a test to verify that this loophole is
closed, as well.
Reported-by: Henré Botha <henrebotha@gmail.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A linked worktree's .git file is a "gitfile" pointing at the
.git/worktrees/<id> directory within the repository. When `git init
--separate-git-dir=<path>` is used on an existing repository to relocate
the repository's .git/ directory to a different location, it neglects to
update the .git files of linked worktrees, thus breaking the worktrees
by making it impossible for them to locate the repository. Fix this by
teaching --separate-git-dir to repair the .git file of each linked
worktree to point at the new repository location.
Reported-by: Henré Botha <henrebotha@gmail.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The .git/worktrees/<id>/gitdir file points at the location of a linked
worktree's .git file. Its content must be of the form
/path/to/worktree/.git (from which the location of the worktree itself
can be derived by stripping the "/.git" suffix). If the gitdir file is
deleted or becomes corrupted or outdated, then Git will be unable to
find the linked worktree. An easy way for the gitdir file to become
outdated is for the user to move the worktree manually (without using
"git worktree move"). Although it is possible to manually update the
gitdir file to reflect the new linked worktree location, doing so
requires a level of knowledge about worktree internals beyond what a
user should be expected to know offhand.
Therefore, teach "git worktree repair" how to repair broken or outdated
.git/worktrees/<id>/gitdir files automatically. (For this to work, the
command must either be invoked from within the worktree whose gitdir
file requires repair, or from within the main or any linked worktree by
providing the path of the broken worktree as an argument to "git
worktree repair".)
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The .git file in a linked worktree is a "gitfile" which points back to
the .git/worktrees/<id> entry in the main worktree or bare repository.
If a worktree's .git file is deleted or becomes corrupted or outdated,
then the linked worktree won't know how to find the repository or any of
its own administrative files (such as 'index', 'HEAD', etc.). An easy
way for the .git file to become outdated is for the user to move the
main worktree or bare repository. Although it is possible to manually
update each linked worktree's .git file to reflect the new repository
location, doing so requires a level of knowledge about worktree
internals beyond what a user should be expected to know offhand.
Therefore, teach "git worktree repair" how to repair broken or outdated
worktree .git files automatically. (For this to work, the command must
be invoked from within the main worktree or bare repository, or from
within a worktree which has not become disconnected from the repository
-- such as one which was created after the repository was moved.)
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The environment variable `GIT_SEQUENCE_EDITOR`, and the configuration
variable 'sequence.editor', which were added in 821881d88d ("rebase -i":
support special-purpose editor to edit insn sheet, 2011-10-17), are
mentioned in the `git config` man page but not anywhere else.
Include `config/sequencer.txt` in `git-rebase.txt`, so that both the
environment variable and the configuration setting are mentioned there.
Also, add `GIT_SEQUENCE_EDITOR` to the list of environment variables
in `git(1)`.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The name of the "Special-Use Mailboxes" in Gmail are localized
using the user's localization settings. Add a note to that effect
in `git imap-send`'s documentation, to make it easier for users to
configure their account.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As a public service, it is unlikely that the Gmail server is configured
to throw a certificate that does not verify at the user.
Remove the `sslVerify=false` config from the Gmail example.
Also, comment it in the `example.com` example, and add a note to the
user explaining that they might want to uncomment it if they are having
trouble connecting. While at it, use an Asciidoc 'Note' section in the
Gmail example also.
Based-on-patch-by: Barbu Paul - Gheorghe <barbu.paul.gheorghe@gmail.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the 'Examples' subsection in the 'Configuration' section and move
these examples to the 'Examples' section. Also remove the 'Variables'
title since it is now useless.
Also, use appropriate Asciidoc syntax for configuration values, and
capitalize 'Gmail' properly.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Let's refactor code adding a new `write_in_file()` function
that opens a file for writing a message and closes it and a
wrapper for writing mode.
This helper will be used in later steps and makes the code
simpler and easier to understand.
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Miriam Rubio <mirucam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Following 'enum bisect_error' vocabulary, return variable 'res' is
always non-positive.
Let's use '-res' instead of 'abs(res)' to make the code clearer.
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Miriam Rubio <mirucam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In cmd_bisect__helper() function, if an invalid or no
subcommand is passed there is a BUG.
BUG() out instead of returning an error.
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Miriam Rubio <mirucam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a repository has an alternate object directory configured, callers
can traverse through each alternate's MIDX by walking the '->next'
pointer.
But, when 'prepare_multi_pack_index_one()' loads multiple MIDXs, it
places the new ones at the front of this pointer chain, not at the end.
This can be confusing for callers such as 'git repack -ad', causing test
failures like in t7700.6 with 'GIT_TEST_MULTI_PACK_INDEX=1'.
The occurs when dropping a pack known to the local MIDX with alternates
configured that have their own MIDX. Since the alternate's MIDX is
returned via 'get_multi_pack_index()', 'midx_contains_pack()' returns
true (which is correct, since it traverses through the '->next' pointer
to find the MIDX in the chain that does contain the requested object).
But, we call 'clear_midx_file()' on 'the_repository', which drops the
MIDX at the path of the first MIDX in the chain, which (in the case of
t7700.6 is the one in the alternate).
This patch addresses that by:
- placing the local MIDX first in the chain when calling
'prepare_multi_pack_index_one()', and
- introducing a new 'get_local_multi_pack_index()', which explicitly
returns the repository-local MIDX, if any.
Don't impose an additional order on the MIDX's '->next' pointer beyond
that the first item in the chain must be local if one exists so that we
avoid a quadratic insertion.
Likewise, use 'get_local_multi_pack_index()' in
'remove_redundant_pack()' to fix the formerly broken t7700.6 when run
with 'GIT_TEST_MULTI_PACK_INDEX=1'.
Finally, note that the MIDX ordering invariant is only preserved by the
insertion order in 'prepare_packed_git()', which traverses through the
ODB's '->next' pointer, meaning we visit the local object store first.
This fragility makes this an undesirable long-term solution if more
callers are added, but it is acceptable for now since this is the only
caller.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The positional arguments are specified in this order: "bad" then "good".
To avoid confusion, the options above the positional arguments
are now specified in the same order. They can still be specified in any
order since they're options, not positional arguments.
Signed-off-by: Hugo Locurcio <hugo.locurcio@hugo.pro>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the missing "e" in "de". While it is possible in French to omit it,
that only occurs with an apostrophe and only when the next word starts
with a vowel or mute h, which is not the case here.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Acked-by: Jean-Noël Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, subject does not take any arguments. This commit introduce
`sanitize` formatting option to 'subject' atom.
`subject:sanitize` - print sanitized subject line, suitable for a filename.
e.g.
%(subject): "the subject line"
%(subject:sanitize): "the-subject-line"
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Heba Waly <heba.waly@gmail.com>
Signed-off-by: Hariom Verma <hariom18599@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function 'format_sanitized_subject()' is responsible for
sanitized subject line in pretty.c
e.g.
the subject line
the-sanitized-subject-line
It would be a nice enhancement to `subject` atom to have the
same feature. So in the later commits, we plan to add this feature
to ref-filter.
Refactor `format_sanitized_subject()`, so it can be reused in
ref-filter.c for adding new modifier `sanitize` to "subject" atom.
Currently, the loop inside `format_sanitized_subject()` runs
until `\n` is found. But now, we stored the first occurrence
of `\n` in a variable `eol` and passed it in
`format_sanitized_subject()`. And the loop runs upto `eol`.
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Heba Waly <heba.waly@gmail.com>
Signed-off-by: Hariom Verma <hariom18599@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sometimes while using 'parent' atom, user might want to see abbrev hash
instead of full 40 character hash.
Just like 'objectname', it might be convenient for users to have the
`:short` and `:short=<length>` option for printing 'parent' hash.
Let's introduce `short` option to 'parent' atom.
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Heba Waly <heba.waly@gmail.com>
Signed-off-by: Hariom Verma <hariom18599@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sometimes while using 'tree' atom, user might want to see abbrev hash
instead of full 40 character hash.
Just like 'objectname', it might be convenient for users to have the
`:short` and `:short=<length>` option for printing 'tree' hash.
Let's introduce `short` option to 'tree' atom.
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Heba Waly <heba.waly@gmail.com>
Signed-off-by: Hariom Verma <hariom18599@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In previous commits, we prepared some `objectname` related functions
for more generic usage, so that these functions can be used for `tree`
and `parent` atom.
But the name of some functions and fields may mislead someone.
For ex: function `objectname_atom_parser()` implies that it is
for atom `objectname`.
Let's rename all such functions and fields.
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Heba Waly <heba.waly@gmail.com>
Signed-off-by: Hariom Verma <hariom18599@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As we plan to use `grab_objectname()` for `tree` and `parent` atom,
it's better to parameterize the error messages in the function
`grab_objectname()` where "objectname" is hard coded.
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Heba Waly <heba.waly@gmail.com>
Signed-off-by: Hariom Verma <hariom18599@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prepares `grab_objectname()` for more generic usage.
This change will allow us to reuse `grab_objectname()` for
the `tree` and `parent` atoms in a following commit.
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Heba Waly <heba.waly@gmail.com>
Signed-off-by: Hariom Verma <hariom18599@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, ref-filter only supports printing email with angle brackets.
Let's add support for two more email options.
- trim : for email without angle brackets.
- localpart : for the part before the @ sign out of trimmed email
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Heba Waly <heba.waly@gmail.com>
Signed-off-by: Hariom Verma <hariom18599@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because the hook runs after the main checkout operation finishes, it
cannot affect what branch will be the current branch, what paths are
updated in the working tree, etc., which was described as "cannot
affect the outcome of 'checkout'".
However, the exit status of the hook is used as the exit status of
the 'checkout' command and is observable by anybody who spawned the
'checkout', which was missing from the documentation. Fix this.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The FETCH_HEAD is now always read from the filesystem regardless of
the ref backend in use, as its format is much richer than the
normal refs, and written directly by "git fetch" as a plain file..
* hn/refs-fetch-head-is-special:
refs: read FETCH_HEAD and MERGE_HEAD generically
refs: move gitdir into base ref_store
refs: fix comment about submodule ref_stores
refs: split off reading loose ref data in separate function
Command line completion (in contrib/) usually omits redundant,
deprecated and/or dangerous options from its output; it learned to
optionally include all of them.
* rz/complete-more-options:
completion: add GIT_COMPLETION_SHOW_ALL env var
parse-options: add --git-completion-helper-all
Code clean-up.
* jk/leakfix:
submodule--helper: fix leak of core.worktree value
config: fix leak in git_config_get_expiry_in_days()
config: drop git_config_get_string_const()
config: fix leaks from git_config_get_string_const()
checkout: fix leak of non-existent branch names
submodule--helper: use strbuf_release() to free strbufs
clear_pattern_list(): clear embedded hashmaps
API update.
* en/mem-pool:
mem-pool: use consistent pool variable name
mem-pool: use more standard initialization and finalization
mem-pool: add convenience functions for strdup and strndup
"git receive-pack" that accepts requests by "git push" learned to
outsource some of the ref updates to the new "proc-receive" hook.
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When pushing a pseudo reference (such as "refs/for/master/topic"), may
create or update one or more references. The real names of the
references will be stored in the report options. Parse report options
to create or update remote-tracking branches properly.
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to test update of remote-tracking branches for special refs,
add new "remote.origin.fetch" settings and test cases.
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new multi-valued config variable "receive.procReceiveRefs"
for `receive-pack` command, like the follows:
git config --system --add receive.procReceiveRefs refs/for
git config --system --add receive.procReceiveRefs refs/drafts
If the specific prefix strings given by the config variables match the
reference names of the commands which are sent from git client to
`receive-pack`, these commands will be executed by an external hook
(named "proc-receive"), instead of the internal `execute_commands`
function.
For example, if it is set to "refs/for", pushing to a reference such as
"refs/for/master" will not create or update reference "refs/for/master",
but may create or update a pull request directly by running the hook
"proc-receive".
Optional modifiers can be provided in the beginning of the value to
filter commands for specific actions: create (a), modify (m),
delete (d). A `!` can be included in the modifiers to negate the
reference prefix entry. E.g.:
git config --system --add receive.procReceiveRefs ad:refs/heads
git config --system --add receive.procReceiveRefs !:refs/heads
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
