* ef/msys-imap:
Windows: use BLK_SHA1 again
MSVC: Enable OpenSSL, and translate -lcrypto
mingw: enable OpenSSL
mingw: wrap SSL_set_(w|r)fd to call _get_osfhandle
imap-send: build imap-send on Windows
imap-send: fix compilation-error on Windows
imap-send: use run-command API for tunneling
imap-send: use separate read and write fds
imap-send: remove useless uid code
This patch adds basic boilerplate support (based on corresponding Perl
sections) for enabling the building and installation Python scripts.
There are currently no Python scripts being built, and when Python
scripts are added in future patches, their building and installation
can be disabled by defining NO_PYTHON.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some test scripts run Perl scripts as if they were git-* scripts, and
thus need to use the same perl that will be put in the shebang line of
git*.perl commands. $PERL_PATH therefore needs to be used instead of
a bare "perl".
The tests can fail if another perl is found in $PATH before the one
defined in $PERL_PATH.
Example test failure caused by this: the perl defined in $PERL_PATH has
Error.pm installed, and therefore the Git.pm's Makefile.PL doesn't install
the private copy. The perl from $PATH doesn't have Error.pm installed, and
all git*.perl scripts invoked during the test will fail loading Error.pm.
Makefile patch by Jeff King <peff@peff.net>.
Signed-off-by: Philippe Bruhat (BooK) <book@cpan.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The kernel.org hosts where the packages are built are now using Fedora
11, which defaults to sha256 for file digests instead of md5. Older
versions of rpm can not handle these packages. Tell rpmbuild to use md5
file digests for better compatibility.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Provide a DEFAULT_PAGER knob so packagers can set the fallback
pager to something appropriate during the build.
Examples:
On (old) solaris systems, /usr/bin/less (typically the first less
found) doesn't understand the default arguments (FXRS), which
forces users to alter their environment (PATH, GIT_PAGER, LESS,
etc) or have a local or global gitconfig before paging works as
expected.
On Debian systems, by policy packages must fall back to the
'pager' command, so that changing the target of the
/usr/bin/pager symlink changes the default pager for all packages
at once.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Ben Walton <bwalton@artsci.utoronto.ca>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Provide a DEFAULT_EDITOR knob to allow setting the fallback
editor to use instead of vi (when VISUAL, EDITOR, and GIT_EDITOR
are unset). The value can be set at build time according to a
system’s policy. For example, on Debian systems, the default
editor should be the 'editor' command.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Ben Walton <bwalton@artsci.utoronto.ca>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When git-fetch was builtin-ized, the previous script was moved to
contrib/examples. Now, it is the sole remaining user for
'git fetch--tool'.
The fetch--tool code is still worth keeping around so people can
try out the old git-fetch.sh, for example when investigating
regressions from the builtinifaction.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-http-backend CGI can be configured into any Apache server
using ScriptAlias, such as with the following configuration:
LoadModule cgi_module /usr/libexec/apache2/mod_cgi.so
LoadModule alias_module /usr/libexec/apache2/mod_alias.so
ScriptAlias /git/ /usr/libexec/git-core/git-http-backend/
Repositories are accessed via the translated PATH_INFO.
The CGI is backwards compatible with the dumb client, allowing all
older HTTP clients to continue to download repositories which are
managed by the CGI.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Starting with commit 51ea55190b,
git-compat-util.h includes compat/bswap.h
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When building Git with MSVC on Windows, directories named after the Git alias
are created for the output files, e.g. there is a "git-merge-index" directory
next to the "git-merge-index.exe" executable in the build root. Previously,
"make all" just checked if "git-merge-index" and "git-merge-index.exe" are the
same file, and if not, tried to remove "git-merge-index". This fails in the
case of "git-merge-index" being a directory, which is why this is checked now.
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since NO_OPENSSL is no longer defined on Windows, BLK_SHA1 is not defined
anymore implicitly. Define it explicitly.
As a nice side-effect, we no longer link against libcrypto.dll, which has
non-trivial startup costs because it depends on 6 otherwise unneeded
DLLs.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We don't use crypto, but rather require libeay32 and
ssleay32. handle it in both the Makefile msvc linker
script, and the buildsystem generator.
Signed-off-by: Marius Storm-Olsen <mstormo@gmail.com>
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since we have OpenSSL in msysgit now, enable it to support SSL
encryption for imap-send.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The docbook/xmlto toolchain insists on quoting ' as \'. This does
achieve the quoting goal, but modern 'man' implementations turn the
apostrophe into a unicode "proper" apostrophe (given the right
circumstances), breaking code examples in many of our manpages.
Quote them as \(aq instead, which is an "apostrophe quote" as per the
groff_char manpage.
Unfortunately, as Anders Kaseorg kindly pointed out, this is not
portable beyond groff, so we add an extra Makefile variable GNU_ROFF
which you need to enable to get the new quoting.
Thanks also to Miklos Vajna for documentation.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When you use the option --submodule=log you can see the submodule
summaries inlined in the diff, instead of not-quite-helpful SHA-1 pairs.
The format imitates what "git submodule summary" shows.
To do that, <path>/.git/objects/ is added to the alternate object
databases (if that directory exists).
This option was requested by Jens Lehmann at the GitTogether in Berlin.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the POSIX-specific tunneling code has been replaced
by the run-command API (and a compile-error has been
cleaned away), we can now enable imap-send on Windows
builds.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The script 'git notes' allows you to edit and show commit notes, by
calling either
git notes show <commit>
or
git notes edit <commit>
This patch has been improved by the following contributions:
- Tor Arne Vestbø: fix printing of multi-line notes
- Michael J Gruber: test and handle empty notes gracefully
- Thomas Rast:
- only clean up message file when editing
- use GIT_EDITOR and core.editor over VISUAL/EDITOR
- t3301: fix confusing quoting in test for valid notes ref
- t3301: use test_must_fail instead of !
- refuse to edit notes outside refs/notes/
- Junio C Hamano: tests: fix "export var=val"
- Christian Couder: documentation: fix 'linkgit' macro in "git-notes.txt"
- Johan Herland: minor cleanup and bugfixing in git-notes.sh (v2)
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Tor Arne Vestbø <tavestbo@trolltech.com>
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit notes are blobs which are shown together with the commit
message. These blobs are taken from the notes ref, which you can
configure by the config variable core.notesRef, which in turn can
be overridden by the environment variable GIT_NOTES_REF.
The notes ref is a branch which contains "files" whose names are
the names of the corresponding commits (i.e. the SHA-1).
The rationale for putting this information into a ref is this: we
want to be able to fetch and possibly union-merge the notes,
maybe even look at the date when a note was introduced, and we
want to store them efficiently together with the other objects.
This patch has been improved by the following contributions:
- Thomas Rast: fix core.notesRef documentation
- Tor Arne Vestbø: fix printing of multi-line notes
- Alex Riesen: Using char array instead of char pointer costs less BSS
- Johan Herland: Plug leak when msg is good, but msglen or type causes return
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Tor Arne Vestbø <tavestbo@trolltech.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
get_commit_notes(): Plug memory leak when 'if' triggers, but not because of read_sha1_file() failure
'make clean' should remove the object files from block-sha1/
instead of the non-existent mozilla-sha1/ directory.
Signed-off-by: Carlos R. Mafra <crmafra@aei.mpg.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is excellent documentation for these options in
Documentation/Makefile, but some users may never find it.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When git is compiled with the MIPSpro 7.4.4m compiler, and NO_PTHREADS is
set, and NO_MMAP is _not_ set, then git segfaults when trying to access the
first entry in a reflog. If NO_PTHREADS is not set (which implies that the
pthread library is linked in), or NO_MMAP _is_ set, then the segfault is
not encountered. The conservative choice has been made to set NO_MMAP in
the Makefile to avoid this flaw. The GNU C compiler does not produce this
behavior.
The segfault happens in refs.c:read_ref_at(). The mmap succeeds, and the
loop is executed properly until rec is rewound into the first line (reflog
entry) of the file. The segfault is caught by test 28 of
t1400-update-ref.sh which fails when 'git rev-parse --verify "master@{May 25
2005}"' is called.
So, add a comment in the Makefile to describe why NO_MMAP is set and as a
hint to those who may be interested in unsetting it.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since commit dcda3614 removed the use of a variable length array from
builtin-pack-objects.c, it is now safe to compile with the threaded delta
search feature enabled. Formerly, the MIPSpro 7.4.4m compiler warned that
variable length arrays should not be used with pthreads.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the MSVC section of the Makefile, BASIC_CFLAGS is set to a
value which contains the string "-DWIN32-D_CONSOLE". This results
in a (single) malformed -Define being passed to the compiler.
At least on my cygwin installation, the msvc compiler seems to
ignore this parameter, without issuing an error or warning, and
results in the WIN32 and _CONSOLE macros being undefined. This
breaks the build.
In order to fix the build, we simply insert a space between the
two -Define parameters, "-DWIN32" and "-D_CONSOLE", as originally
intended.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This may help us debug issues on Windows, as we now can build Git
natively on Windows with both MinGW and MSVC.
Signed-off-by: Marius Storm-Olsen <mstormo@gmail.com>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Enable MSVC builds with GNU Make by simply calling
make MSVC=1
(Debug build possible by adding DEBUG=1 as well)
Two scripts, clink.pl and lib.pl, are used to convert certain GCC
specific command line options into something MSVC understands.
By building for MSVC with GNU Make, we can ensure that the MSVC
port always follows the latest code, and does not lag behind due
to unmaintained NMake Makefile or IDE projects.
Signed-off-by: Marius Storm-Olsen <mstormo@gmail.com>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* db/vcs-helper:
Makefile: remove remnant of separate http/https/ftp helpers
Use a clearer style to issue commands to remote helpers
Make the "traditionally-supported" URLs a special case
Makefile: install hardlinks for git-remote-<scheme> supported by libcurl if possible
Makefile: do not link three copies of git-remote-* programs
Makefile: git-http-fetch does not need expat
http-fetch: Fix Makefile dependancies
Add transport native helper executables to .gitignore
git-http-fetch: not a builtin
Use an external program to implement fetching with curl
Add support for external programs for handling native fetches
This message is designed to help new users understand what
has happened when refs fail to push. However, it does not
help experienced users at all, and significantly clutters
the output, frequently dwarfing the regular status table and
making it harder to see.
This patch introduces a general configuration mechanism for
optional messages, with this push message as the first
example.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Makefile comment for NEEDS_SSL_WITH_CRYPTO says to define it "if
you need -lcrypto with -lssl (Darwin)." However, what it actually
does is add -lssl when you use -lcrypto and not the other way around.
However, libcrypto contains a majority of the ERR_* functions from
OpenSSL (at least on OS X) so we need it both ways.
So, add NEEDS_CRYPTO_WITH_SSL which adds -lcrypto to the OpenSSL link
flags and clarify the difference between it and NEEDS_SSL_WITH_CRYPTO.
Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of trying to make http://, https://, and ftp:// URLs
indicative of some sort of pattern of transport helper usage, make
them a special case which runs the "curl" helper, and leave the
mechanism by which arbitrary helpers will be chosen entirely to future
work.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It requires that $JSMIN command can function as a filter.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add 'blame_incremental' view, which uses "git blame --incremental"
and JavaScript (Ajax), where 'blame' use "git blame --porcelain".
* gitweb generates initial info by putting file contents (from
"git cat-file") together with line numbers in blame table
* then gitweb makes web browser JavaScript engine call startBlame()
function from gitweb.js
* startBlame() opens XMLHttpRequest connection to 'blame_data' view,
which in turn calls "git blame --incremental" for a file, and
streams output of git-blame to JavaScript (gitweb.js)
* XMLHttpRequest event handler updates line info in blame view as soon
as it gets data from 'blame_data' (from server), and it also updates
progress info
* when 'blame_data' ends, and gitweb.js finishes updating line info,
it fixes colors to match (as far as possible) ordinary 'blame' view,
and updates information about how long it took to generate page.
Gitweb deals with streamed 'blame_data' server errors by displaying
them in the progress info area (just in case).
The 'blame_incremental' view tries to be equivalent to 'blame' action;
there are however a few differences in output between 'blame' and
'blame_incremental' view:
* 'blame_incremental' always used query form for this part of link(s)
which is generated by JavaScript code. The difference is visible
if we use path_info link (pass some or all arguments in path_info).
Changing this would require implementing something akin to href()
subroutine from gitweb.perl in JavaScript (in gitweb.js).
* 'blame_incremental' always uses "rowspan" attribute, even if
rowspan="1". This simplifies code, and is not visible to user.
* The progress bar and progress info are still there even after
JavaScript part of 'blame_incremental' finishes work.
Note that currently no link generated by gitweb leads to this new view.
This code is based on patch by Petr Baudis <pasky@suse.cz> patch, which
in turn was tweaked up version of Fredrik Kuivinen <frekui@gmail.com>'s
proof of concept patch.
This patch adds GITWEB_JS compile configuration option, and modifies
git-instaweb.sh to take gitweb.js into account. The code for
git-instaweb.sh was taken from Pasky's patch.
Signed-off-by: Fredrik Kuivinen <frekui@gmail.com>
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert git update-server-info to a built-in command and use parseopt.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* lt/block-sha1:
remove ARM and Mozilla SHA1 implementations
block-sha1: guard gcc extensions with __GNUC__
make sure byte swapping is optimal for git
block-sha1: make the size member first in the context struct
It is true that NEEDS_RESOLV is needed on SunOS if NO_IPV6 is set since
hstrerror() resides in libresolv, but performing this test at its current
location is not very useful. It will only have any effect if the user
modifies the make variables from the make command line, and will have no
effect if a config.mak file is used. A better location for this
conditional would have been further down in the Makefile after the
config.mak and config.mak.autogen had been parsed. Rather than adding
clutter to the Makefile for a conditional that will likely never be
triggered, just remove it, and any user on SunOS that manually sets NO_IPV6
can also set NEEDS_RESOLV.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 06aaaa0bf7 may step index format
version up and down, depends on whether extended flags present in the
index. This adds a test to check for index format version.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cc/replace:
t6050: check pushing something based on a replaced commit
Documentation: add documentation for "git replace"
Add git-replace to .gitignore
builtin-replace: use "usage_msg_opt" to give better error messages
parse-options: add new function "usage_msg_opt"
builtin-replace: teach "git replace" to actually replace
Add new "git replace" command
environment: add global variable to disable replacement
mktag: call "check_sha1_signature" with the replacement sha1
replace_object: add a test case
object: call "check_sha1_signature" with the replacement sha1
sha1_file: add a "read_sha1_file_repl" function
replace_object: add mechanism to replace objects found in "refs/replace/"
refs: add a "for_each_replace_ref" function
They are both slower than the new BLK_SHA1 implementation, so it is
pointless to keep them around.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of installing/copying three programs separately, just install one
and try to make hardlinks to the other two.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Specify git-http-fetch's dependancies explicitly rather than inheriting from
git-http-push, as that may not be built if the libcurl version is too old or
NO_EXPAT is defined
Signed-off-by: Mike Ralphson <mike@abacus.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Based on the mozilla SHA1 routine, but doing the input data accesses a
word at a time and with 'htonl()' instead of loading bytes and shifting.
It requires an architecture that is ok with unaligned 32-bit loads and a
fast htonl().
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This splits up git-http-fetch so that it isn't built-in.
It also removes the general dependency on curl, because it is no
longer used by any built-in code. Because they are no longer LIB_OBJS,
add LIB_H to the dependencies of http-related object files, and remove
http.h from the dependencies of transport.o
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the transport native helper mechanism to fetch by http (and ftp, etc).
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
transport_get() can call transport_native_helper_init() to have list and
fetch-ref operations handled by running a separate program as:
git remote-<something> <remote> [<url>]
This program then accepts, on its stdin, "list" and "fetch <hex>
<name>" commands; the former prints out a list of available refs and
either their hashes or what they are symrefs to, while the latter
fetches them into the local object database and prints a newline when done.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
SunOS grep does not understand -C<n> nor -e
Fix export_marks() error handling.
git branch: clean up detached branch handling
git branch: avoid unnecessary object lookups
git branch: fix performance problem
do_one_ref(): null_sha1 check is not about broken ref
Conflicts:
Makefile
The first "grep -C1" test in t7002 does not pass on my SunOS-5.11-i86pc,
and that is not because our way to spawn external grep is broken, but
because the native grep does not understand -C<n>.
It turns out that Peff was also using this option himself because our
Makefile doesn't do that automatically. Brandon Casey uses SUNWspro
compiler without having to set this, and it turns out that the compiler
does not define preprocessor macro __unix__ which made him always use the
built-in grep, never an external one.
Let's be more explicit and say that we do not use external grep on Suns.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 003b33a8 recently added a call to basename(). On IRIX 6.5, this
function resides in libgen and -lgen is required for the linker.
Update configure.ac too.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For some reason there still are people who use the old style layout
to put everything in $(bindir). The previous commit breaks the install
for them, because it tries to unconditionally remove git from execdir
and cp/ln from bindir --- oops.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a git command executes a subcommand, it uses the "git
foo" form, which relies on finding "git" in the PATH.
Normally this should not be a problem, since the same "git"
that was used to invoke git in the first place will be
found. And if somebody invokes a "git" outside of the PATH
(e.g., by giving its absolute path), this case is already
covered: we put that absolute path onto the front of PATH.
However, if one is using "sudo", then sudo will execute the
"git" from the PATH, but pass along a restricted PATH that
may not contain the original "git" directory. In this case,
executing a subcommand will fail.
To solve this, we put the "git" wrapper itself into the
execdir; this directory is prepended to the PATH when git
starts, so the wrapper will always be found.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
attr: plug minor memory leak
request-pull: really disable pager
Makes some cleanup/review in gittutorial
Makefile: git.o depends on library headers
git-submodule documentation: fix foreach example
There is special handling in compat/regex/regex.c for the GNU compiler
to define alloca to __builtin_alloca, but the native compiler must include
alloca.h which happens when HAVE_ALLOCA_H is defined.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The system regex is either slow or buggy for complex
patterns, like the built-in xfuncname pattern for java
files.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There was no tweakable knob to use the regex compat code; it
was embedded in the mingw build. Since other platforms may
want to use it, let's factor it out in the usual way for
build configuration knobs.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sp/msysgit:
compat/ has subdirectories: do not omit them in 'make clean'
Fix typo in nedmalloc warning fix
MinGW: Teach Makefile to detect msysgit and apply specific settings
Fix warnings in nedmalloc when compiling with GCC 4.4.0
Add custom memory allocator to MinGW and MacOS builds
MinGW readdir reimplementation to support d_type
connect.c: Support PuTTY plink and TortoisePlink as SSH on Windows
git: browsing paths with spaces when using the start command
MinGW: fix warning about implicit declaration of _getch()
test-chmtime: work around Windows limitation
Work around a regression in Windows 7, causing erase_in_line() to crash sometimes
Quiet make: do not leave Windows behind
MinGW: GCC >= 4 does not need SNPRINTF_SIZE_CORR anymore
Conflicts:
Makefile
* bc/solaris:
configure: test whether -lresolv is needed
Makefile: insert SANE_TOOL_PATH to PATH before /bin or /usr/bin
git-compat-util.h: avoid using c99 flex array feature with Sun compiler 5.8
Makefile: add section for SunOS 5.7
Makefile: introduce SANE_TOOL_PATH for prepending required elements to PATH
Makefile: define __sun__ on SunOS
git-compat-util.h: tweak the way _XOPEN_SOURCE is set on Solaris
On Solaris choose the OLD_ICONV iconv() declaration based on the UNIX spec
Makefile: add NEEDS_RESOLV to optionally add -lresolv to compile arguments
Makefile: use /usr/ucb/install on SunOS platforms rather than ginstall
Conflicts:
Makefile
In an earlier patch, we introduced SANE_TOOL_PATH that is prepended to
user's PATH. This had an unintended consequence of overriding user's
private binary directory that typically comes earlier in the PATH to holds
even saner commands than whatever comes with the system.
For example, a user may have ~/bin that is early in the path and contains
a shell script "vi" that launches system's /bin/vi with specific options.
Prepending SANE_TOOL_PATH to the PATH that happens to have "vi" in it
defeats such customization.
This fixes the issue by inserting SANE_TOOL_PATH just before /bin or
/usr/bin appears on the PATH.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit changes handling of the msysgit specific settings, so
that they can be applied to official git.git. Some msysgit
settings differ from the standard MinGW settings. We move them
into an ifndef block that is only evaluated if a file
THIS_IS_MSYSGIT is present in the parent directory, which is the
case for an msysgit working environment. The tag file is unlikely
to be present accidentally.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some platforms (like SunOS and family) have kept their common binaries at
some historical moment in time, and introduced new binaries with modern
features in a special location like /usr/xpg4/bin or /usr/ucb. Some of the
features provided by these modern binaries are expected and required by git.
If the featureful binaries are not in the users path, then git could end up
using the less featureful binary and fail.
So provide a mechanism to prepend elements to the users PATH at runtime so
the modern binaries will be found.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The SUNWspro compiler does not define __sun__ (like GCC does). A check of
this macro was recently added to detect compilation on SunOS and to modify
the handling of the NO_ICONV and _XOPEN_SOURCE feature macros.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
OLD_ICONV is only necessary on Solaris until UNIX03. This is indicated
by the private macro _XPG6 which is set in /usr/include/sys/feature_tests.h.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This library is required on Solaris when compiling with NO_IPV6 since
hstrerror resides in libresolv. Additionally, Solaris 7 will need it,
since inet_ntop and inet_pton reside there too.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* da/pretty-tempname:
diff: generate pretty filenames in prep_temp_blob()
compat: add a basename() compatibility function
compat: add a mkstemps() compatibility function
Conflicts:
Makefile
The standard allocator on Windows is pretty bad prior
to Windows Vista, and nedmalloc is better than the
modified dlmalloc provided with newer versions of the
MinGW libc.
NedMalloc stats in Git
----------------------
All results are the best result out of 3 runs. The
benchmarks have been done on different hardware, so
the repack times are not comparable.
These benchmarks are all based on 'git repack -adf'
on the Linux kernel.
XP
-----------------------------------------------
MinGW Threads Total Time Speed
-----------------------------------------------
3.4.2 (1T) 00:12:28.422
3.4.2 + nedmalloc (1T) 00:07:25.437 1.68x
3.4.5 (1T) 00:12:20.718
3.4.5 + nedmalloc (1T) 00:07:24.809 1.67x
4.3.3-tdm (1T) 00:12:01.843
4.3.3-tdm + nedmalloc (1T) 00:07:16.468 1.65x
4.3.3-tdm (2T) 00:07:35.062
4.3.3-tdm + nedmalloc (2T) 00:04:57.874 1.54x
Vista
-----------------------------------------------
MinGW Threads Total Time Speed
-----------------------------------------------
4.3.3-tdm (1T) 00:07:40.844
4.3.3-tdm + nedmalloc (1T) 00:07:17.548 1.05x
4.3.3-tdm (2T) 00:05:33.746
4.3.3-tdm + nedmalloc (2T) 00:05:27.334 1.02x
Mac Mini
-----------------------------------------------
GCC Threads Total Time Speed
-----------------------------------------------
i686-darwin9-4.0.1 (2T) 00:09:57.346
i686-darwin9-4.0.1+ned (2T) 00:08:51.072 1.12x
Signed-off-by: Marius Storm-Olsen <marius@trolltech.com>
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Windows, we have to check whether there are scripts which would
override .exe files, but this check missed the "quietification".
Make now prints 'BUILTIN all' instead of a long chain of 'test || rm'
commands.
[spr: added clarification what make will print. ]
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some systems such as Windows lack libgen.h so provide a
basename() implementation for cross-platform use.
This introduces the NO_LIBGEN_H construct to the Makefile
and autoconf scripts.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
mkstemps() is a BSD extension so provide an implementation
for cross-platform use.
Signed-off-by: David Aguilar <davvid@gmail.com>
Tested-by: Johannes Sixt <j6t@kdbg.org> (Windows)
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This command can only be used now to list replace refs in
"refs/replace/" and to delete them.
The option to list replace refs is "-l".
The option to delete replace refs is "-d".
The behavior should be consistent with how "git tag" and "git branch"
are working.
The code has been copied from "builtin-tag.c" by Kristian Høgsberg
<krh@redhat.com> and Carlos Rica <jasampler@gmail.com> that was itself
based on git-tag.sh and mktag.c by Linus Torvalds.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code implementing this mechanism has been copied more-or-less
from the commit graft code.
This mechanism is used in "read_sha1_file". sha1 passed to this
function that match a ref name in "refs/replace/" are replaced by
the sha1 that has been read in the ref.
We "die" if the replacement recursion depth is too high or if we
can't read the replacement object.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/mktree:
mktree: validate entry type in input
mktree --batch: build more than one tree object
mktree --missing: updated usage message and man page
mktree --missing: allow missing objects
t1010: add mktree test
mktree: do not barf on a submodule commit
builtin-mktree.c: use a helper function to handle one line of input
mktree: use parse-options
build-in git-mktree
We can avoid a GNU dependency by using /usr/ucb/install.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'cc/bisect' (early part):
bisect: make "git bisect" use new "--next-all" bisect-helper function
bisect: add "check_good_are_ancestors_of_bad" function
bisect: implement the "check_merge_bases" function
bisect: automatically sort sha1_array if needed when looking it up
bisect: make skipped array functions more generic
bisect: remove too much function nesting
bisect: use new "struct argv_array" to prepare argv for "setup_revisions"
bisect: store good revisions in a "sha1_array"
bisect: implement "rev_argv_push" to fill an argv with revs
bisect: use "sha1_array" to store skipped revisions
am: simplify "sq" function by using "git rev-parse --sq-quote"
bisect: use "git rev-parse --sq-quote" instead of a custom "sq" function
rev-parse: add --sq-quote to shell quote arguments
rev-list: remove stringed output flag from "show_bisect_vars"
bisect--helper: remove "--next-vars" option as it is now useless
bisect: use "git bisect--helper --next-exit" in "git-bisect.sh"
bisect--helper: add "--next-exit" to output bisect results
bisect: move common bisect functionality to "bisect_common"
rev-list: refactor printing bisect vars
rev-list: make "estimate_bisect_steps" non static
Like Darwin, OpenBSD's stat struct uses st_ctimespec and st_mtimestruct
rather than st_ctim and st_mtim.
Signed-off-by: Tony Kemp <tony.kemp@newcastle.edu.au>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the installed programs are tar'ed up and installed on a system where
bin/ and libexec/git-core/ live on different file systems, we do not want
libexec/git-core/git-* to be hardlinks to bin/git.
Noticed by Cedric Staniewski.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
