We may later add a new configuration variable in "init" section that takes
a boolean value. Erroring out at the beginning of the config parser makes
life harder for later enhancement.
The existing configuration variable is parsed by git_config_pathname()
that checks and rejects init.templatedir that is unset without this extra
check. Remove it.
Signed-off-by: Steven Drake <sdrake@xnet.co.nz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rather than having to pass --template to git init and clone for a custom
setup, `init.templatedir` may be set in '~/.gitconfig'. The environment
variable GIT_TEMPLATE_DIR can already be used for this but this is nicer.
System administrators may prefer using this variable in the system-wide
config file to point at a locally modified copy (e.g. /etc/gittemplate)
rather than editing vanilla template files in '/usr/share'.
Signed-off-by: Steven Drake <sdrake@xnet.co.nz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When starting a new repository, I see my students often say
% git init newrepo
and curse git. They could say
% mkdir newrepo; cd newrepo; git init
but allowing it as an obvious short-cut may be nicer.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also add missing --bare to init-db synopsis.
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Lots of die() calls did not actually report the kind of error, which
can leave the user confused as to the real problem. Use die_errno()
where we check a system/library call that sets errno on failure, or
one of the following that wrap such calls:
Function Passes on error from
-------- --------------------
odb_pack_keep open
read_ancestry fopen
read_in_full xread
strbuf_read xread
strbuf_read_file open or strbuf_read_file
strbuf_readlink readlink
write_in_full xwrite
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Describe fixes since 1.6.2.3
doc/git-daemon: add missing arguments to max-connections option
doc/git-daemon: add missing arguments to options
init: Do not segfault on big GIT_TEMPLATE_DIR environment variable
imap-send: use correct configuration variable in documentation
* jc/shared-literally:
t1301: loosen test for forced modes
set_shared_perm(): sometimes we know what the final mode bits should look like
move_temp_to_file(): do not forget to chmod() in "Coda hack" codepath
Move chmod(foo, 0444) into move_temp_to_file()
"core.sharedrepository = 0mode" should set, not loosen
This fixes the behaviour of octal notation to how it is defined in the
documentation, while keeping the traditional "loosen only" semantics
intact for "group" and "everybody".
Three main points of this patch are:
- For an explicit octal notation, the internal shared_repository variable
is set to a negative value, so that we can tell "group" (which is to
"OR" in 0660) and 0660 (which is to "SET" to 0660);
- git-init did not set shared_repository variable early enough to affect
the initial creation of many files, notably copied templates and the
configuration. We set it very early when a command-line option
specifies a custom value.
- Many codepaths create files inside $GIT_DIR by various ways that all
involve mkstemp(), and then call move_temp_to_file() to rename it to
its final destination. We can add adjust_shared_perm() call here; for
the traditional "loosen-only", this would be a no-op for many codepaths
because the mode is already loose enough, but with the new behaviour it
makes a difference.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
LF at the end of format strings given to die() is redundant because
die already adds one on its own.
Signed-off-by: Alexander Potashev <aspotashev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If core.bare or core.sharedRepository are set in /etc/gitconfig or
~/.gitconfig, then 'git init' will read the values when constructing a
new config file; reading them, however, will override the values
specified on the command line. In the case of --bare, this ends up
causing a segfault, without the repository being properly initialised;
in the case of --shared, the permissions are set according to the
existing config settings, not what was specified on the command line.
This fix saves any specified values for --bare and --shared prior to
reading existing config settings, and restores them after reading but
before writing the new config file. core.bare is ignored in all
situations, while core.sharedRepository will only be used if --shared
is not specified to git init.
Also includes testcases which use a specified global config file
override, demonstrating the former failure scenario.
Signed-off-by: Deskin Miller <deskinm@umich.edu>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
User notifications are presented as 'git cmd', and code comments
are presented as '"cmd"' or 'git's cmd', rather than 'git-cmd'.
Signed-off-by: Heikki Orsila <heikki.orsila@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a user passes "--template=", then our template parameter
is blank. Unfortunately, copy_templates() assumes it has at
least one character, and does all sorts of bad things like
reading from template[-1] and then proceeding to link all of
'/' into the .git directory.
This patch just checks for that condition in copy_templates
and aborts. As a side effect, this means that --template=
now has the meaning "don't copy any templates."
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sb/dashless:
Make usage strings dash-less
t/: Use "test_must_fail git" instead of "! git"
t/test-lib.sh: exit with small negagive int is ok with test_must_fail
Conflicts:
builtin-blame.c
builtin-mailinfo.c
builtin-mailsplit.c
builtin-shortlog.c
git-am.sh
t/t4150-am.sh
t/t4200-rerere.sh
Expanding system paths relative to git_exec_path can be used for
creating an installation that can be moved to a different directory
without re-compiling. We use this approach for template_dir and the
system wide gitconfig. The Windows installer (msysgit) is an example
for such a setup.
This commit moves common code to a new function system_path(). System
paths that are to be interpreted relative to git_exec_path are passed to
system_path() and the return value is used instead of the original path.
system_path() prefixes a relative path with git_exec_path and leaves
absolute paths unmodified. For example, we now write
template_dir = system_path(DEFAULT_GIT_TEMPLATE_DIR);
[j6t: moved from path.c to exec_cmd.c]
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When you misuse a git command, you are shown the usage string.
But this is currently shown in the dashed form. So if you just
copy what you see, it will not work, when the dashed form
is no longer supported.
This patch makes git commands show the dash-less version.
For shell scripts that do not specify OPTIONS_SPEC, git-sh-setup.sh
generates a dash-less usage string now.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is unfortunate that "git init --bare" does not work and the only reason
why "init" did not learn its own "--bare" option is because "git --bare
init" already does the job (and as an option to the git 'potty', it is
more generic solution).
This teaches "git init" its own "--bare" option, so that both "git --bare init"
and "git init --bare" works mostly the same way.
[jc: rewrote the log message and added test]
Signed-off-by: Luciano Rocha <strange@nsk.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* db/clone-in-c:
Add test for cloning with "--reference" repo being a subset of source repo
Add a test for another combination of --reference
Test that --reference actually suppresses fetching referenced objects
clone: fall back to copying if hardlinking fails
builtin-clone.c: Need to closedir() in copy_or_link_directory()
builtin-clone: fix initial checkout
Build in clone
Provide API access to init_db()
Add a function to set a non-default work tree
Allow for having for_each_ref() list extra refs
Have a constant extern refspec for "--tags"
Add a library function to add an alternate to the alternates file
Add a lockfile function to append to a file
Mark the list of refs to fetch as const
Conflicts:
cache.h
t/t5700-clone-reference.sh
git_config() only had a function parameter, but no callback data
parameter. This assumes that all callback functions only modify
global variables.
With this patch, every callback gets a void * parameter, and it is hoped
that this will help the libification effort.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already detect if symbolic links are supported by the filesystem.
This patch adds autodetect for case-insensitive filesystems, such
as VFAT and others.
Signed-off-by: Dmitry Potapov <dpotapov@gmail.com>
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The caller first calls set_git_dir() to specify the GIT_DIR, and then
calls init_db() to initialize it. This also cleans up various parts of
the code to account for the fact that everything is done with GIT_DIR
set, so it's unnecessary to pass the specified directory around.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git init --shared=0xxx, where '0xxx' is an octal number, will create
a repository with file modes set to '0xxx'. Users with a safe umask
value (0077) can use this option to force file modes. For example,
'0640' is a group-readable but not group-writable regardless of
user's umask value. Values compatible with old Git versions are written
as they were before, for compatibility reasons. That is, "1" for
"group" and "2" for "everybody".
"git config core.sharedRepository 0xxx" is also handled.
Signed-off-by: Heikki Orsila <heikki.orsila@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier, git-init tested for a valid HEAD ref, but if the repository
was empty, there was none. Instead, test for the existence of
the file $GIT_DIR/HEAD.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Documentation/git-am.txt: Pass -r in the example invocation of rm -f .dotest
timezone_names[]: fixed the tz offset for New Zealand.
filter-branch documentation: non-zero exit status in command abort the filter
rev-parse: fix potential bus error with --parseopt option spec handling
Use a single implementation and API for copy_file()
Documentation/git-filter-branch: add a new msg-filter example
Correct fast-export file mode strings to match fast-import standard
Originally by Kristian Hï¿œgsberg; I fixed the conversion of rerere, which
had a different API.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When DEFAULT_GIT_TEMPLATE_DIR is specified as a relative path,
init-db made it relative to exec_path using prefix_path(), which
is wrong. prefix_path() is about a file inside the work tree.
There was a similar misuse in config.c that takes relative
ETC_GITCONFIG path. Noticed by Junio C Hamano.
We concatenate the paths manually. (prefix_filename() won't do
because it expects a prefix with a trailing '/'.)
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When DEFAULT_GIT_TEMPLATE_DIR is specified as a relative path,
init-db made it relative to exec_path using prefix_path(), which
is wrong. prefix_path() is about a file inside the work tree.
There was a similar misuse in config.c that takes relative
ETC_GITCONFIG path.
A convenience function prefix_filename() can concatenate two paths
to form a path that points at somewhere outside the work tree.
Use it in these codepaths instead.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to make git relocatable (i.e. not have the prefix compiled-in)
the template directory must depend on the location where this git instance
is found, which is GIT_EXEC_DIR.
The exec path is prepended only if the compiled-in default template
directory is to be used and that is relative. Any relative directories
that are specified via environment variable or the --exec-dir switch are
taken as is.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already autodetect if filemode is reliable on the filesystem
to deal with VFAT and friends. Do the same for symbolic link
support.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Here is my attempt to fix this with a minimally intrusive patch.
* As "git --bare init" cannot tell if it was called with --bare or
just "GIT_DIR=. git init", I added an explicit assignment of
is_bare_repository_cfg on the codepath for "git --bare".
* GIT_WORK_TREE alone without GIT_DIR does not make any sense,
nor GIT_WORK_TREE with an explicit "git --bare". Catch that
mistake. It might make sense to move this check to "git.c"
side as well, but I tried to shoot for the minimum change for
now.
* Some scripts, especially from the olden days, rely on
traditional GIT_DIR behaviour in "git init". Namely, these
are some notable patterns:
(create a bare repository)
- mkdir some.git && cd some.git && GIT_DIR=. git init
- mkdir some.git && cd some.git && git --bare init
(create a non-bare repository)
- mkdir .git && GIT_DIR=.git git init
- mkdir .git && GIT_DIR=`pwd`/.git git init
This comes with a new test script and also passes the existing
test suite, but there may be cases that are still broken with
the current tip of master and this patch does not yet fix. I'd
appreciate help in straightening this mess out.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The old version of work-tree support was an unholy mess, barely readable,
and not to the point.
For example, why do you have to provide a worktree, when it is not used?
As in "git status". Now it works.
Another riddle was: if you can have work trees inside the git dir, why
are some programs complaining that they need a work tree?
IOW it is allowed to call
$ git --git-dir=../ --work-tree=. bla
when you really want to. In this case, you are both in the git directory
and in the working tree. So, programs have to actually test for the right
thing, namely if they are inside a working tree, and not if they are
inside a git directory.
Also, GIT_DIR=../.git should behave the same as if no GIT_DIR was
specified, unless there is a repository in the current working directory.
It does now.
The logic to determine if a repository is bare, or has a work tree
(tertium non datur), is this:
--work-tree=bla overrides GIT_WORK_TREE, which overrides core.bare = true,
which overrides core.worktree, which overrides GIT_DIR/.. when GIT_DIR
ends in /.git, which overrides the directory in which .git/ was found.
In related news, a long standing bug was fixed: when in .git/bla/x.git/,
which is a bare repository, git formerly assumed ../.. to be the
appropriate git dir. This problem was reported by Shawn Pearce to have
caused much pain, where a colleague mistakenly ran "git init" in "/" a
long time ago, and bare repositories just would not work.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now you can do the following to create a repository which
has a separate working tree:
/tmp/foo$ export GIT_DIR=/tmp/bar
/tmp/foo$ git --work-tree . init
Initialized empty Git repository in /tmp/bar/
/tmp/foo$ git config core.worktree
/tmp/foo
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-init lacks an option to suppress non-error and non-warning output -
this patch adds one.
Signed-off-by: Jeffrey C. Ollie <jeff@ocjtech.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I audited git for potential undetected write failures.
In the cases fixed below, the diagnostics I add mimic the diagnostics
used in surrounding code, even when that means not reporting
the precise strerror(errno) cause of the error.
Signed-off-by: Jim Meyering <jim@meyering.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All the other directory location variables do not have the trailing
slash.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This mechanically converts strncmp() to use prefixcmp(), but only when
the parameters match specific patterns, so that they can be verified
easily. Leftover from this will be fixed in a separate step, including
idiotic conversions like
if (!strncmp("foo", arg, 3))
=>
if (!(-prefixcmp(arg, "foo")))
This was done by using this script in px.perl
#!/usr/bin/perl -i.bak -p
if (/strncmp\(([^,]+), "([^\\"]*)", (\d+)\)/ && (length($2) == $3)) {
s|strncmp\(([^,]+), "([^\\"]*)", (\d+)\)|prefixcmp($1, "$2")|;
}
if (/strncmp\("([^\\"]*)", ([^,]+), (\d+)\)/ && (length($1) == $3)) {
s|strncmp\("([^\\"]*)", ([^,]+), (\d+)\)|(-prefixcmp($2, "$1"))|;
}
and running:
$ git grep -l strncmp -- '*.c' | xargs perl px.perl
Signed-off-by: Junio C Hamano <junkio@cox.net>
While 'init-db' still is and probably will always remain a valid git
command for obvious backward compatibility reasons, it would be a good
idea to move shipped tools and docs to using 'init' instead.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This removes the old is_bare_git_dir(const char *) to ask if a
directory, if it is a GIT_DIR, is a bare repository, and
replaces it with is_bare_repository(void *). The function looks
at core.bare configuration variable if exists but uses the old
heuristics: if it is ".git" or ends with "/.git", then it does
not look like a bare repository, otherwise it does.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Make "init" the equivalent of "init-db". This should make first GIT
impression a little more friendly.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Many users have noticed that core.filemode doesn't appear to be
automatically set right on Cygwin when using a repository stored
on NTFS. The issue is that Cygwin and NTFS correctly supports
the executable mode bit, and Git properly detected that, but most
native Windows applications tend to create files such that Cygwin
sees the executable bit set when it probably shouldn't be.
This is especially bad if the user's favorite editor deletes the
file then recreates it whenever they save (vs. just overwriting)
as now a file that was created with mode 0644 by checkout-index
appears to have mode 0755.
So we introduce NO_TRUSTABLE_FILEMODE, settable at compile time.
Setting this option forces core.filemode to false, even if the
detection code would have returned true. This option should be
enabled by default on Cygwin.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We broke the discipline Linus set up to allow compiler help us
avoid typos in environment names in the early days of git over
time. This defines a handful preprocessor constants for
environment variable names used in relatively core parts of the
system.
I've left out variable names specific to subsystems such as HTTP
and SSL as I do not think they are big problems.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Instead of passing --template explicitely to init-db and clone, you can
just set the environment variable GIT_TEMPLATE_DIR.
Also make use of it in the tests, to make sure that the templates are
copied.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
New and experienced Git users alike are finding out too late that
they forgot to enable reflogs in the current repository, and cannot
use the information stored within it to recover from an incorrectly
entered command such as `git reset --hard HEAD^^^` when they really
meant HEAD^^ (aka HEAD~2).
So enable reflogs by default in all future versions of Git, unless
the user specifically disables it with:
[core]
logAllRefUpdates = false
in their .git/config or ~/.gitconfig.
We only enable reflogs in repositories that have a working directory
associated with them, as shared/bare repositories do not have
an easy means to prune away old log entries, or may fail logging
entirely if the user's gecos information is not valid during a push.
This heuristic was suggested on the mailing list by Junio.
Documentation was also updated to indicate the new default behavior.
We probably should start to teach usuing the reflog to recover
from mistakes in some of the tutorial material, as new users are
likely to make a few along the way and will feel better knowing
they can recover from them quickly and easily, without fsck-objects'
lost+found features.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Back in the old days of Git when people messed around with their
GIT_DIR environment variable more often it was nice to know whether
or not git-init-db created a .git directory or used GIT_DIR.
As most users at that time were rather technical UNIXy folk the
message "defaulting to local storage area" made sense to some and
seemed reasonable.
But it doesn't really convey any meaning to the new Git user,
as they don't know what a 'local storage area is' nor do they
know enough about Git to care. It also really doesn't tell the
experienced Git user a whole lot about the command they just ran,
especially if they might be reinitializing an existing repository
(e.g. to update hooks).
So now we print out what we did ("Initialized empty" or
"Reinitialized existing"), what type of repository ("" or "shared"),
and what location the repository will be in ("$GIT_DIR").
Suggested in part by Andy Parkins in his Git 'niggles' list
(<200612132237.10051.andyparkins@gmail.com>).
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
