This change removes between 1 and 4 sed invocations per completion
entered by the user. In the case of cat-file the 4 invocations per
completion can take a while on Cygwin; running these replacements
directly within bash saves some time for the end user.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Now that log, whatchanged, rev-list, etc. support the symmetric
difference operator '...' we should provide bash completion for it
just like we do for '..'.
While we are at it we can remove two sed invocations during the
interactive prompt and replace them with internal bash operations.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If the user has setup a command line of "git --git-dir=baz" then
anything we complete must be performed within the scope of "baz"
and not the current working directory.
This is useful with commands such as "git --git-dir=git.git log m"
to complete out "master" and view the log for the master branch of
the git.git repository. As a nice side effect this also works for
aliases within the target repository, just as git would honor them.
Unfortunately because we still examine arguments by absolute position
in most of the more complex commands (e.g. git push) using --git-dir
with those commands will probably still cause completion to fail.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Now that Git natively supports remote specifications within the
config file such as:
[remote "origin"]
url = ...
we should provide bash completion support "out of the box" for
these remotes, just like we do for the .git/remotes directory.
Also cleaned up the __git_aliases expansion to use the same form
of querying and filtering repo-config as this saves two fork/execs
in the middle of a user prompted completion. Finally also forced
the variable 'word' to be local within __git_aliased_command.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The only platform which actually needs to define .exe suffixes as
part of its completion set is Cygwin. So don't define them on any
other platform.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The show-branch and merge-base commands were partially supported
when it came to bash completions as they were only specified in
one form another. Now we specify them in both forms.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Completion for the --hard/--soft/--mixed modes of operation as
well as a ref name for <commit-ish> can be very useful and save
some fingers.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
On Cygwin a user might complete the new git-branch builtin as
git-branch.exe, at which point bash requires a new completion
registration for the command.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This lets us take advantage of the fact that git-cherry-pick now saves
the message in MERGE_MSG too.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Bound to 'o' by default, compatible with pcl-cvs and
buffer-mode. Suggested by Han-Wen Nienhuys.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is useful when doing a merge that changes many files with only a
few conflicts here and there.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
- Add aliases to the list of available git commands.
- Make completion work for aliased commands.
Signed-off-by: Dennis Stosberg <dennis@stosberg.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
vc-git complains that it can't find the definition of ignore-errors
unless I (require 'cl). So I guess the correct place to do that is in
the file itself.
Signed-off-by: Karl Hasselström <kha@treskal.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Provide some more detailed installation instructions, for the
elisp-challenged among us.
Signed-off-by: Karl Hasselström <kha@treskal.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The deleted file should be labeled "renamed to" and the added file
"renamed from", not the other way around (duh!)
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is a set of bash completion routines for many of the
popular core Git tools. I wrote these routines from scratch
after reading the git-compl and git-compl-lib routines available
from the gitcompletion package at http://gitweb.hawaga.org.uk/
and found those to be lacking in functionality for some commands.
Consequently there may be some similarities but many differences.
Since these are completion routines only for tools shipped with
core Git and since bash is a popular shell on many of the native
core Git platforms (Linux, Mac OS X, Solaris, BSD) including these
routines as part of the stock package would probably be convienent
for many users.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch avoids problems if vc-git.el is installed and activated, but
the git executable is not available, for example
http://list-archive.xemacs.org/xemacs-beta/200608/msg00062.html
Signed-off-by: Ville Skyttä <scop@xemacs.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
By default, running git-status again will now reuse an existing buffer
that displays the same directory. The old behavior of always creating
a new buffer can be obtained by customizing the git-reuse-status-buffer
option.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This way the ignore command will really only ignore the marked files
and not files with the same name in subdirectories.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add bindings for "h" and "?" in git-status-mode to display help about the mode,
including keymap via (describe-function 'git-status-mode), like in PCL-CVS.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The only visible change is that git-blame doesn't understand
"--compability" anymore, but it does accept "--compatibility" instead,
which is already documented.
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Allow NO_SVN_TESTS to be defined to skip git-svn tests. These
tests are time-consuming due to SVN being slow, and even more so
if SVN Perl libraries are not available.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Here's a patch that fixes print-log and diff compatibility with recent
vc versions, such as current GNU Emacs CVS.
Signed-off-by: Ville Skytt,Ad(B <scop@xemacs.org>
Thanks to Santi <sbejar@gmail.com> for the bug report and explanation:
> /path/to/repository/project/file
> /path/to/repository/project-2/file
<...>
> you end up with a project with the following files:
>
> file
> -2/file
Signed-off-by: Eric Wong <normalperson@yhbt.net>
git-svn init url://to/the/repo local-repo
will create the local-repo dirrectory if doesn't exist yet and
populate it as expected.
Original patch by Luca Barbato, cleaned up and made to work for
the current version of git-svn by me (Eric Wong).
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch renames man1 and man7 variables to man1dir and man7dir,
according to "Makefile Conventions: Variables for Installation
Directories" in make.info of GNU Make.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Makefiles in subdirectories now use existing value of INSTALL, bindir,
mandir if it is set, allowing those to be set in main Makefile or in
included config.mak. Main Makefile exports variables which it sets.
Accidentally it renames bin to bindir in Documentation/Makefile
(should be bindir from start, but is unused, perhaps to be removed).
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Slower connections can make git-svn look as if it's doing
nothing for a long time; leaving the user wondering if we're
actually doing anything. Now we print some file progress just
to assure the user that something is going on while they're
waiting.
Added the -q/--quiet option to users to revert to the old method
if they preferred it.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
--follow-parent:
This is especially helpful when we're tracking a directory
that has been moved around within the repository, or if we
started tracking a branch and never tracked the trunk it was
descended from.
This relies on the SVN::* libraries to work. We can't
reliably parse path info from the svn command-line client
without relying on XML, so it's better just to have the SVN::*
libs installed.
This also removes oldvalue verification when calling update-ref
In SVN, branches can be deleted, and then recreated under the
same path as the original one with different ancestry
information, causing parent information to be mismatched /
misordered.
Also force the current ref, if existing, to be a parent,
regardless of whether or not it was specified.
--no-metadata:
This gets rid of the git-svn-id: lines at the end of every commit.
With this, you lose the ability to use the rebuild command. If
you ever lose your .git/svn/git-svn/.rev_db file, you won't be
able to fetch again, either. This is fine for one-shot imports.
Also fix some issues with multi-fetch --follow-parent that were
exposed while testing this. Additionally, repack checking is
simplified greatly.
git-svn log will not work on repositories using this, either.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is intended for interoperability with git-svnimport.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The 'graft-branches' command can now analyze tree matches for
merge detection after commits are done, when --branch or
--branch-all-refs options are used.
We ensure that tree joins (--branch and --branch-all-refs
options) during commit time only add SVN parents that occurred
before the commit we're importing
Also fixed branch detection via merge messages, this manner of
merge detection (a la git-svnimport) is really all fuzzy, but at
least it actually works now :)
Add some new tests to go along with these fixes, too.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Tested on a plain Ubuntu Hoary installation
using subversion 1.1.1-2ubuntu3
1.1.x issues I had to deal with:
* Avoid the noisy command-line client compatibility check if we
use the libraries.
* get_log() arguments differ (now using a nice wrapper from
Junio's suggestion)
* get_file() is picky about what kind of file handles it gets,
so I ended up redirecting STDOUT. I'm probably overflushing
my file handles, but that's the safest thing to do...
* BDB kept segfaulting on me during tests, so svnadmin will use FSFS
whenever we can.
* If somebody used an expanded CVS $Id$ line inside a file, then
propsetting it to use svn:keywords will cause the original CVS
$Id$ to be retained when asked for the original file. As far as
I can see, this is a server-side issue. We won't care in the
test anymore, as long as it's not expanded by SVN, a static
CVS $Id$ line is fine.
While we're at making ourselves more compatible, avoid grep
along with the -q flag, which is GNU-specific. (grep avoidance
tip from Junio, too)
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Trying to open an interactive editor in the console while stdout is
being piped to the parent process doesn't work out very well.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When tracking directories with nearly all of its files at
the most nested levels, --rmdir would accidentally go too
far when deleting.
Of course, we'll add a test for this condition, too.
Makefile: automatically run new tests as they appear in t/
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We will now automatically fetch the refs/remotes/git-svn ref
from origin and store a Pull: line for it.
--remote=<origin> may be passed if your remote is named something
other than 'origin'
Also, remember to make GIT_SVN_DIR whenever we need to create
.rev_db
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Tested on a plain Ubuntu Warty installation
using subversion 1.0.6-1.2ubuntu3
svn add --force was never needed, as it only affected
directories, which git (thankfully) doesn't track
The 1.0.x also didn't support symlinks(!), so allow NO_SYMLINK
to be defined for running tests
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Revisions with long commit messages were being skipped, since
the 'git-svn-id' metadata line was at the end and git-log uses a
32k buffer to print the commits.
Also the last 'git-svn-id' metadata line in a commit is always
the valid one, so make sure we use that, as well.
Made the verbose flag work by passing the correct option switch
('--summary') to git-log.
Finally, optimize -r/--revision argument handling by passing
the appropriate limits to revision
Signed-off-by: Eric Wong <normalperson@yhbt.net>
This means we'll have a loose object when we encounter a symlink
but that's not the common case.
We also don't have to worry about svn:eol-style when using the
SVN libraries, either. So remove the code to deal with that.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Share the repack counter between branches when doing
multi-fetch.
Pass the -d flag to git repack by default. That's the
main reason we will want automatic pack generation, to
save space and improve disk cache performance. I won't
add -a by default since it can generate extremely large
packs that make RAM-starved systems unhappy.
We no longer generate the .git/svn/$GIT_SVN_ID/info/uuid
file, either. It was never read in the first place.
Check for and create .rev_db if we need to during fetch (in case
somebody manually blew away their .rev_db and wanted to start
over. Mainly makes debugging easier).
Croak with $? instead of $! if there's an error closing pipes
Quiet down some of the chatter, too.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
repo_path_split() is already pretty fast, and is already
optimized via caching.
We also don't need to create an exclude file if we're
relying on the SVN libraries.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
This is a very intrusive change, so I've beefed up the tests
significantly. Added 'full-test' a target to the Makefile,
to test different possible configurations. This is intended
for maintainers only. Users should only be concerned with
'test' succeeding.
We now have a very simple custom database format for handling
mapping of svn revisions => git commits. Of course, we're
not really using it yet, either.
Also disabled automatic branch-finding on new trees for now.
It's too easily broken. revisions_eq() function should be
helpful for branch detection.
Also removed an extra assertion in fetch_cmd() that wasn't
correctly done. This bug was found by full-test.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
This means we no longer have to deal with having bloated SVN
working copies around and we get a nice performance increase as
well because we don't have to exec the SVN binary and start a
new server connection each time.
Of course we have to manually manage memory with SVN::Pool
whenever we can, and hack around cases where SVN just eats
memory despite pools (I blame Perl, too). I would like to
keep memory usage as stable as possible during long fetch/commit
processes since I still use computers with only 256-512M RAM.
commit should always be faster with the SVN library code. The
SVN::Delta interface is leaky (or I'm not using it with pools
correctly), so I'm forking on every commit, but that doesn't
seem to hurt performance too much (at least on normal Unix/Linux
systems where fork() is pretty cheap).
fetch should be faster in most common cases, but probably not all.
fetches will be faster where client/server delta generation is
the bottleneck and not bandwidth. Of course, full-files are
generated server-side via deltas, too. Full files are always
transferred when they're updated, just like git-svnimport and
unlike command-line svn. I'm also hacking around memory leaks
(see comments) here by using some more forks.
I've tested fetch with http://, https://, file://, and svn://
repositories, so we should be reasonably covered in terms of
error handling for fetching.
Of course, we'll keep plain command-line svn compatibility as a
fallback for people running SVN 1.1 (I'm looking into library
support for 1.1.x SVN, too). If you want to force command-line
SVN usage, set GIT_SVN_NO_LIB=1 in your environment.
We also require two simultaneous connections (just like
git-svnimport), but this shouldn't be a problem for most
servers.
Less important commands:
show-ignore is slower because it requires repository
access, but -r/--revision <num> can be specified.
graft-branches may use more memory, but it's a
short-term process and is funky-filename-safe.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
This quick feature should make it easy to look up svn log
messages when svn users refer to -r/--revision numbers.
The following features from `svn log' are supported:
--revision=<n>[:<n>] - is supported, non-numeric args are not:
HEAD, NEXT, BASE, PREV, etc ...
-v/--verbose - just maps to --raw (in git log), so
it's completely incompatible with
the --verbose output in svn log
--limit=<n> - is NOT the same as --max-count,
doesn't count merged/excluded commits
--incremental - supported (trivial :P)
New features:
--show-commit - shows the git commit sha1, as well
--oneline - our version of --pretty=oneline
Any other arguments are passed directly to `git log'
Signed-off-by: Eric Wong <normalperson@yhbt.net>
New commands:
graft-branches - The most interesting command of the bunch. It
detects branches in SVN via various techniques (currently
regexes and file copies). It can be later extended to handle
svk and other properties people may use to track merges in svk.
Basically, merge tracking is not standardized at all in the SVN
world, and git grafts are perfect for dealing with this
situation.
Existing branch support (via tree matches) is only handled at
fetch time.
The following tow were originally implemented as shell scripts
several months ago, but I just decided to streamline things a
bit and added them to the main script.
multi-init - supports git-svnimport-like command-line syntax for
importing repositories that are layed out as recommended by the
SVN folks. This is a bit more tolerant than the git-svnimport
command-line syntax and doesn't require the user to figure out
where the repository URL ends and where the repository path
begins.
multi-fetch - runs fetch on all known SVN branches we're
tracking. This will NOT discover new branches (unlike
git-svnimport), so multi-init will need to be re-run (it's
idempotent).
Consider these three to be auxilliary commands (like
show-ignore, and rebuild) so their behavior won't receive as
much testing or scrutiny as the core commands (fetch and
commit).
Signed-off-by: Eric Wong <normalperson@yhbt.net>
This should help keep disk usage sane for large imports.
--repack takes an optional argument for the interval, it
defaults to 1000 if no argument is specified.
Arguments to --repack-flags are passed directly to git-repack.
No arguments are passed by default.
Idea stolen from git-cvsimport :)
Signed-off-by: Eric Wong <normalperson@yhbt.net>
While we're at it, read_repo_config has been added and
expanded to handle case where command-line arguments are
optional to Getopt::Long
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Since GIT_SVN_ID usage is probably going to become more
widespread <evil grin>, we won't run the chance of somebody
having a GIT_SVN_ID name that conflicts with one of the default
directories that already exist in $GIT_DIR (branches/tags).
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Sometimes I don't feel like downloading an entire tree again when
I actually decide a branch is worth tracking, so some users can
get around it more easily with this.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
By breaking the pipe read once we've seen a commit twice.
This should make -B/--branch-all-ref faster and usable on a
frequent basis.
We use topological order now for calling git-rev-list, and any
commit we've seen before should imply that all parents have been
seen (at least I hope that's the case for --topo-order).
Signed-off-by: Eric Wong <normalperson@yhbt.net>
This should make life easier for all those who type:
`git-rev-parse --symbolic --all | xargs -n1 echo -b`
every time they run git-svn fetch.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
If new revisions are fetched, that implies we haven't merged,
acked, or nacked them yet, and attempting to write the tree
we're committing means we'd silently clobber the newly fetched
changes.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
svn forces UTF-8 for commit messages, and with LC_ALL set to 'C'
it is unable to determine encoding of the git commit message.
Now we'll just assume the user has set LC_* correctly for
the commit message they're using.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
If we read the maximum size of our buffer into $buf, and the
last character is '\015', there's a chance that the character is
'\012', which means our regex won't work correctly. At the
worst case, this could introduce an extra newline into the code.
We'll now read an extra character if we see '\015' is the last
character in $buf.
We also forgot to recalculate the length of $buf after doing the
newline substitution, causing some files to appeare truncated.
We'll do that now and force byte semantics in length() for good
measure.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
svn has trouble parsing files with embedded '@' characters. For
example,
svn propget svn:keywords foo@bar.c
svn: Syntax error parsing revision 'bar.c'
I asked about this on #svn and the workaround suggested was to append
an explicit revision specifier:
svn propget svn:keywords foo@bar.c@BASE
This patch appends '@BASE' to the filename in all calls to 'svn
propget'.
Patch originally by Seth Falcon <sethfalcon@gmail.com>
Seth: signoff?
[ew: Made to work with older svn that don't support peg revisions]
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Some changes to the latest git.git made this test croak. So
we'll always just force everything when using a new branch.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
svn < 1.3.x would display changes to keywords lines as modified
if they aren't expanded in the working copy. We already check
for changes against the git tree here, so checking against the
svn one is probably excessive.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The dash installed on my Debian Sarge boxes don't seem to like
<<'' as a heredoc starter. Recent versions of dash do not need
this fix.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Unlike my earlier test patch, this also checks svn:eol-style and
makes sure it's applied to working copy updates. This is
definitely more correct than my original attempt at killing
keyword expansions, but I still haven't tested it enough to
know. Feedback would be much appreciated.
Also changed assert_svn_wc_clean() to only work on the svn
working copy. This requires a separate call to assert_tree() to
check wc integrity against git in preparation for another change
I'm planning.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* Clarify that 'init' requires an argument
* Remove instances of 'SVN_URL' in the manpage, it's not an
environment variable.
* Refer to 'Additional Fetch Arguments' when documenting 'fetch'
* document --authors-file / -A option
Thanks to Pavel Roskin and Seth Falcon for bringing these issues
to my attention.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Use this tool to rewrite the .git/remotes/* files into the config.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
I hacked it up to teach it the git extended diff headers, made
it not to read the whole patch in the array.
Also, the original program, when arguments are given, ran "diff"
with the given arguments and showed the output from it. Of
course, I changed it to run "git diff" ;-).
Signed-off-by: Junio C Hamano <junkio@cox.net>
Bugs like the last one could've been avoided if it weren't for
this...
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
fetching from repos without an authors-file defined was broken.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
contrib/git-svn/git-svn.txt:
added git-repo-config key names for options
fixed quoting of "git-svn-HEAD" in the manpage
use preformatted text for examples
contrib/git-svn/Makefile:
add target to generate HTML:
http://git-svn.yhbt.net/git-svn.html
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
repo-config keys are any of the long option names minus the '-'
characters
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We chdir internally, so we need a consistent GIT_DIR variable.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We should be safely able to import histories with thousands
of revisions without hogging up lots of memory.
With this, we lose the ability to autocorrect mistakes when
people specify revisions in reverse, but it's probably no longer
a problem since we only have one method of log parsing nowadays.
I've added an extra check to ensure that revision numbers do
increment.
Also, increment the version number to 0.11.0. I really should
just call it 1.0 soon...
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Because committing back to an SVN repository from different
machines can result in different lineages, two different
repositories running git-svn can result in different commit
SHA1s (but of the same tree). Sometimes trees that are tracked
independently are merged together (usually via children),
resulting in non-unique git-svn-id: lines in rev-list.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-diff-file-merge-head generates a diff against the first merge
head, or with a prefix argument against the nth head. Bound to `d h'
by default.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If user name or email are not set explicitly, get them from the
user.name and user.email configuration values before falling back to
the Emacs defaults.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Make sure that functions that call a git process and return a string
always return nil when the subprocess failed.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
It's only for repositories that were imported with very early
versions of git-svn. Unfortunately, some of those repos are out
in the wild already, so fix this warning.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Output a big warning if somebody actually has a pre-1.0 version
of svn that doesn't support it.
Thanks to Yann Dirson for reminding me it still existed
and attempting to re-enable it :)
I think I subconciously removed support for it earlier...
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
'svn info' doesn't work with URLs in svn <= 1.1. Now we
only run svn info in local directories.
As a side effect, this should also work better for 'init' off
directories that are no longer in the latest revision of the
repository.
svn checkout -r<revision> arguments are fixed.
Newer versions of svn (1.2.x) seem to need URL@REV as well as
-rREV to checkout a particular revision...
Add an example in the manpage of how to track directory that has
been moved since its initial revision.
A huge thanks to Yann Dirson for the bug reporting and testing
my original patch. Thanks also to Junio C Hamano for suggesting
a safer way to use git-rev-parse.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If `git-append-signed-off-by' is non-nil, automatically append a
sign-off line to the log message when editing it.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Update .gitignore files in the status list as they are created or
modified.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Also set the list-buffers-directory variable for nicer buffer list
display.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Fixed octal constants for XEmacs.
Added highlighting support in log-edit buffer for Emacs CVS.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add a basic Emacs VC backend. It currently supports the following
commands: checkin, checkout, diff, log, revert, and annotate. There is
only limited support for working with revisions other than HEAD.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
I thought passing --stop-on-copy to svn would save us from all
the trouble svn-arch-mirror had with directory (project) copies.
I was wrong, there was one thing I overlooked.
If a tree was moved from /foo/trunk to /bar/foo/trunk with no
other changes in r10, but the last change was done in r5, the
Last Changed Rev (from svn info) in /bar/foo/trunk will still be
r5, even though the copy in the repository didn't exist until
r10.
Now, if we ever detect that the Last Changed Rev isn't what
we're expecting, we'll run svn diff and only croak if there are
differences between them.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
I ended up using GIT_SVN_ID far more than I ever thought I
would. Typing less is good.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If it does change, we're screwed anyways as SVN will refuse to
commit or update. We also never access more than one SVN
repository per-invocation, so we can store it as a global, too.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
In a new repository, the initial fetch creates a master branch
if one does not exist so HEAD has something to point to.
It now creates a master at the end of the initial fetch run,
pointing to the latest revision. Previously it pointed to the
first revision imported, which is generally less useful.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Syntax is compatible with git-svnimport and git-cvsimport:
normalperson = Eric Wong <normalperson@yhbt.net>
If this option is specified and git-svn encounters an SVN
committer name that it cannot parse, it git-svn will abort.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We regenerate and use git-svn-id: whenever we fetch or otherwise
commit to remotes/git-svn. We don't actually know what revision
number we'll commit to SVN at commit time, so this is useless.
It won't throw off things like 'rebuild', though, which knows to
only use the last instance of git-svn-id: in a log message
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* Fixed manually-edited commit messages not going to
remotes/git-svn on sequential commits after the sequential
commit optimization.
* format help correctly after adding 'show-ignore'
* sha1_short regexp matches down to 4 hex characters
(from git-rev-parse --short documentation)
* Print the first line of the commit message when we commit to
SVN next to the sha1.
* Document 'T' (type change) in the comments
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
I've said I don't like branches in Subversion, and I still don't.
This is a bit more flexible, though, as the argument for -b is any
arbitrary git head/tag reference.
This makes some things easier:
* Importing git history into a brand new SVN branch.
* Tracking multiple SVN branches via GIT_SVN_ID, even from multiple
repositories.
* Adding tags from SVN (still need to use GIT_SVN_ID, though).
* Even merge tracking is supported, if and only the heads end up with
100% equivalent tree objects. This is more stricter but more robust
and foolproof than parsing commit messages, imho.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
In our last update to use the encoding while showing the commit
diff we added a new argument to this function. But we missed
updating all the callers.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
After reading a lengthy discussion on the list, I've come to the
conclusion that creating a 'remotes' directory in refs isn't
such a bad idea.
You can still branch from it by specifying remotes/git-svn (not
needing the leading 'refs/'), and the documentation has been
updated to reflect that.
The 'git-svn' part of the ref can of course be set to whatever
you want by using the GIT_SVN_ID environment variable, as
before.
I'm using refs/remotes/git-svn, and not going with something
like refs/remotes/git-svn/HEAD as it's redundant for Subversion
where there's zero distinction between branches and directories.
Run git-svn rebuild --upgrade to upgrade your repository to use
the new head. git-svn-HEAD must be manually deleted for safety
reasons.
Side note: if you ever (and I hope you never) want to run
git-update-refs on a 'remotes/' ref, make sure you have the
'refs/' prefix as you don't want to be clobbering your
'remotes/' in $GIT_DIR (where remote URLs are stored).
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Earlier we set up the window to never scroll
horizontally, which made it harder to use on a narrow screen.
This patch allows scrollbar to be used as needed by Gtk
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Thanks to Nicolas Vilz <niv@iaglans.de> for noticing this.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
As a rule, interface branches to different SCMs should never be modified
directly by the user. They are used exclusively for talking to the
foreign SCM.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Get the encoding information from repository and convert it to utf-8 before
passing to gtk.TextBuffer.set_text. gtk.TextBuffer.set_text work only with utf-8
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
New features deserve an increment of the minor version. This will very
likely become 1.0.0 unless release-critical bugs are found.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Avoid running 'svn up' to a previous revision if we know the
revision we just committed is the first descendant of the
revision we came from.
This reduces the time to do a series of commits by about 25%.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Recursively finds and lists the svn:ignore property on
directories. The output is suitable for appending to the
$GIT_DIR/info/exclude file.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This fix all the known issue with the graph display
The bug need to be explained graphically
|
a
This line need not be there ---->| \
b |
| /
c
c is parent of a and all a,b and c are placed on the same line and b is child of c
With my last checkin I added a seperate line to indicate that a is
connected to c. But then we had the line connecting a and b which should
not be ther. This changes fixes the same bug
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Rearrange the code little bit so that it is easier to read
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Since i wanted to limit the graph box size i was resetting
the window after an index of 5. This result in line joining
commit nodes to pass over nodes which are not related. The
changes fixes the same
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch address the below:
Use monospace font to draw branch and tag name
set the font size to 13.
Make the graph column resizable. This helps to accommodate large tag names
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This fix the below bug
Junio C Hamano <junkio@cox.net> writes:
>
> It does not work in my repository, since you do not seem to
> handle branch and tag names with slashes in them. All of my
> topic branches live in directories with two-letter names
> (e.g. ak/gitview).
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
None of these were really show-stoppers (or even triggered)
on most of the trees I've tracked.
* Node change prevention for identically named nodes. This is
a limitation of SVN, but we find the error and exit before
it's passed to SVN so we don't dirty our working tree when our
commit fails. git-svn will exit with an error code 1 if any
of the following conditions are found:
1. a directory is removed and a file of the same name of the
removed directory is created
1a. a file has its parent directory removed and the file is
takes the name of the removed parent directory::
baz/zzz => baz
2. a file is removed and a directory of the same name of the
removed file is created.
2a. a file is moved into a deeper directory that shares the
previous name of the file::
dir/$file => dir/file/$file
Since SVN cannot handle these cases, the user will have to
manually split the commit into several parts.
* --rmdir now handles nested/deep removals. If dir/a/b/c/d/e/file
is removed, and everything else is in the dir/ hierarchy is
otherwise empty, then dir/ will be deleted when file is deleted
from svn and --rmdir specified.
* Always assert that we have written the tree we want to write
on commits. This helped me find several bugs in the symlink
handling code (which as been fixed).
* Several symlink handling fixes. We now refuse to set
permissions on symlinks. We also always unlink a file
if we're going to overwrite it.
* Apply changes in a pre-determined order, so we always have
rename from locations handy before we delete them.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
XML::Simple was originally required back when I made svn-arch-mirror
because I needed to explictly track renames with Arch. Then I carried
it over to git-svn because I was afraid somebody could commit an svn
log message that could throw off a non-XML log parser. Then I noticed
the <n> lines column in the header. So, no more XML :)
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Allow 'from..to' notation from the command line.
More liberal sha1 parsing when reading from stdin no longer requires the
sha1 to be the first character, so a leading 'commit ' string is OK.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Both of these options are passed directly to git-diff-tree when
committing to a SVN repository.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Just a typo, I doubt anybody would use (and I highly recommend not
using) this option anyways. But you never know...
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is an Emacs interface for git. The user interface is modeled on
pcl-cvs. It has been developed on Emacs 21 and will probably need some
tweaking to work on XEmacs.
The basic command is 'M-x git-status' which displays a buffer listing
modified files in the selected project tree. In that buffer the
following features are supported:
- add/remove files
- list unknown files
- commit marked files
- manage .gitignore
- commit merges based on MERGE_HEAD
- revert files to the HEAD version
- resolve conflicts with smerge or ediff
- diff files against HEAD/base/mine/other or combined diff
- get a log of the revisions for specified files
There are plenty of unimplemented features too, see the TODO list at
the top of the file...
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This fixes a bug when importing where a directory gets removed/renamed
but is immediately replaced by a file of the same name in the same
revision.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
We run svn log against a URL without a working copy for the first fetch,
so we end up a log that's sorted from highest to lowest. That's bad, we
always want lowest to highest. Just default to --revision 0:HEAD now if
-r isn't specified for the first fetch.
Also sort the revisions after we get them just in case somebody
accidentally reverses the argument to --revision for whatever reason.
Thanks again to Emmanuel Guerin for helping me find this.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
