Bigger writes to network drives on Windows XP fail. Cap them at 31MB to
allow them to succeed. Callers need to be prepared for write() calls
that do less work than requested anyway.
On local drives, write() calls are translated to WriteFile() calls with
a cap of 64KB on Windows XP and 256KB on Vista. Thus a cap of 31MB won't
affect the number of WriteFile() calls which do the actual work. There's
still room for some other version of Windows to use a chunk size of 1MB
without increasing the number of system calls.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix the problem where the cmd->err passed into start_command wasn't
being properly closed when certain types of errors occurr. (Compare
the affected code with the clean shutdown code later in the function.)
On Windows, this problem would be triggered if mingw_spawnvpe()
failed, which would happen if the command to be executed was malformed
(e.g. a text file that didn't start with a #! line). If cmd->err was
a pipe, the failure to close it could result in a hang while the other
side was waiting (forever) for either input or pipe close, e.g. while
trying to shove the output into the side band. On msysGit, this
problem was causing a hang in t5516-fetch-push.
[J6t: With a slight adjustment of the test case, the hang is also
observed on Linux.]
Signed-off-by: bert Dvornik <dvornik+git@gmail.com>
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git_mmap implementation was broken for file sizes that wouldn't fit
into a size_t (32 bits). This was caused by intermediate variables that
were only 32 bits wide when they should be 64 bits.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Coloring the extended headers where done as a whole not per line. less with
option -R (which is the default from git) does not support this coloring
mode because of performance reasons. The -r option would be an alternative
but has problems with lines that are longer than the screen. Therefore
stick to the idiom to color each line separately. The problem is, that the
result of ill_metainfo() will also be used as an parameter to an external
diff driver, so we need to disable coloring in this case.
Because coloring is now done inside fill_metainfo() we can simply add this
string to the diff header and therefore keep the last newline in the
extended header. This results also into the fact that the external diff
driver now gets this last newline too. Which is a change in behavior
but a good one.
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
According to the default hooks/post-receive file, the hook is called
with three arguments on stdin:
<oldrev> <newrev> <refname>
In command-line mode, the arguments come in a different order, because
the email hook instead calls:
generate_email $2 $3 $1
Add a comment to explain why, based on comments from the mailing list
and the commit message to v1.5.1~9. Thanks to Andy for the
explanation.
Requested-by: martin f. krafft <madduck@debian.org>
Cc: Andy Parkins <andyparkins@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Documentation/gitdiffcore: fix order in pickaxe description
Documentation: fix minor inconsistency
Documentation: rebase -i ignores options passed to "git am"
hash_object: correction for zero length file
Reverse the order of "origin" and "result" so that the sentence
really describes an addition rather than a removal.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While we don't always write out commands in full (`git command`) we
should do it consistently in adjacent paragraphs.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Here we simply make --patch a synonym for -p, whose mnemonic was "patch"
all along.
Signed-off-by: Will Palmer <wmpalmer@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a :short modifier to objectname which outputs the abbreviated
object name.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The check whether size is zero was done after if size <= SMALL_FILE_SIZE,
as result, zero size case was never triggered. Instead zero length file
was treated as any other small file. This did not caused any problem, but
if we have a special case for size equal to zero, it is better to make it
work and avoid redundant malloc().
Signed-off-by: Dmitry Potapov <dpotapov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make git-format-patch (used by 'patch' and 'patches' views) use the
same rename detection options that git-diff and git-diff-tree (used
by 'commitdiff', 'blobdiff', etc.) use.
Signed-off-by: Pavan Kumar Sunkara <pavan.sss1991@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Acked-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As an option to the "diff" family, it is fairly obvious what
"detect renames" means. However, for revision traversal, the
"-M" option is just included in the long list of options,
with no indication that it is about showing renames in diffs
versus following renames. Let's make it more explicit.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Restrict the tags used to generate the version string to those that
begin with "v", since git's tags for git-core (ie. excluding git-gui)
are all of the form "vX.Y...".
This is to avoid using private tags by the user in a clone of the git
code repository, which may break certain machinery (eg. Makefile, gitk).
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we know we are creating a bare repository, we use setenv
to set the GIT_DIR directory to the current directory
(either where we already were, or one we created and chdir'd
into with "git init --bare <dir>").
However, with "git --bare init <dir>" (note the --bare as a
git wrapper option), the setup code actually sets GIT_DIR
for us, but it uses the wrong, original cwd when a directory
is given. Because our setenv does not use the overwrite
flag, it is ignored.
We need to set the overwrite flag, but only when we are
given a directory on the command line. That still allows:
GIT_DIR=foo.git git init --bare
to work. The behavior is changed for:
GIT_DIR=foo.git git init --bare bar.git
which used to create the repository in foo.git, but now will
use bar.git. This is more sane, as command line options
should generally override the environment.
Noticed by Oliver Hoffmann.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-check-ref-format(1) describes names which
cannot be used as refnames for git. Some are
legal branchnames in subversion however.
Mangle the not yet handled cases.
Signed-off-by: Torsten Schmutzler <git-ts@theblacksun.eu>
Acked-by: Eric Wong <normalperson@yhbt.net>
The use line was added in ffe256f9. File::Temp calls were later moved
to Git.pm in 0b19138b, but that commit neglected to remove the
now-redundant import.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Use the definite article when talking about a configuration property.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
When "git svn reset" is called with an invalid revision, we
bail out and show the user a proper error message instead
of giving them a cryptic one related to git-svn internals.
ref: http://bugs.debian.org/578908
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Reported-by: Jens Seidel <jensseidel@users.sf.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
* rc/maint-curl-helper:
remote-curl: ensure that URLs have a trailing slash
http: make end_url_with_slash() public
t5541-http-push: add test for URLs with trailing slash
Conflicts:
remote-curl.c
* hg/maint-attr-fix:
attr: Expand macros immediately when encountered.
attr: Allow multiple changes to an attribute on the same line.
attr: Fixed debug output for macro expansion.
* mh/status-optionally-refresh:
t7508: add a test for "git status" in a read-only repository
git status: refresh the index if possible
t7508: add test for "git status" refreshing the index
* cw/ws-indent-with-tab:
whitespace: tests for git-apply --whitespace=fix with tab-in-indent
whitespace: add tab-in-indent support for --whitespace=fix
whitespace: replumb ws_fix_copy to take a strbuf *dst instead of char *dst
whitespace: tests for git-diff --check with tab-in-indent error class
whitespace: add tab-in-indent error class
whitespace: we cannot "catch all errors known to git" anymore
* cc/revert-strategy:
revert: add "--strategy" option to choose merge strategy
merge: make function try_merge_command non static
merge: refactor code that calls "git merge-STRATEGY"
revert: refactor merge recursive code into its own function
revert: use strbuf to refactor the code that writes the merge message
Conflicts:
builtin/revert.c
* jk/cached-textconv:
diff: avoid useless filespec population
diff: cache textconv output
textconv: refactor calls to run_textconv
introduce notes-cache interface
make commit_tree a library function
* pc/remove-warn:
Remove a redundant errno test in a usage of remove_path
Introduce remove_or_warn function
Implement the rmdir_or_warn function
Generalise the unlink_or_warn function
This way, if you have “COMPUTE_HEADER_DEPENDENCIES = YesPlease” in your
config.mak, you can still “make CHECK_HEADER_DEPENDENCIES=Yes” to check
the makefile after a successful build.
This change does not affect the result of the command
“make CHECK_HEADER_DEPENDENCIES=Yes COMPUTE_HEADER_DEPENDENCIES=Yes”.
That will still die with an error message:
cannot compute header dependencies outside a normal build
The message is appropriate because still true.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Do not expect to find http-related dependency fragments after a build
with HTTP support disabled.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Spell out “or” in the NAME line and simplify the leading sentence
in the DESCRIPTION.
Some other language cleanups, too.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Clarify that the GIT_NOTES_REWRITE_REFS environment variable
overrides both ‘[notes "rewrite"] <command>’ and ‘[notes] rewriteRef’.
Add explanations of GIT_NOTES_REWRITE_MODE and GIT_NOTES_REWRITE_REFS
to the ENVIRONMENT section.
Cc: Leif Arne Storset <lstorset@opera.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The main description of display refs for notes should be in
git-log.1, where there is a chance to give a leisurely description
of all the ways they can be set, what they are used for, and so
on. The description in git-notes.1 is only meant to be a quick
reminder of how notes are used.
So simplify it.
Also add an entry for GIT_NOTES_DISPLAY_REF to the environment
section.
Cc: Thomas Rast <trast@student.ethz.ch>
Cc: Johan Herland <johan@herland.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a configuration section summarizing variables that affect the
log family of commands.
Cc: Thomas Rast <trast@student.ethz.ch>
Cc: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Separate the documentation of the semantics, command-line option,
configuration item, and environment variable for the default notes
ref. The documentation is easier to digest in bite-sized pieces.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Copy the descriptions of configuration variables from git-config.1.
Once the descriptions have been ironed out, it would be nice to
refactor them to share text, but for now it is simplest to experiment
with separate copies.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
