Some implementations of xmkstemp() leaves the given in/out buffer
truncated when they return with failure.
6cf6bb3 (Improve error messages when temporary file creation fails,
2010-12-18) attempted to show the real filename we tried to create
(but failed), and if that is not available due to such truncation,
to show the original template that was given by the caller.
But it failed to take into account that the given template could
have "directory/" in front, in which case the truncation point may
not be template[0] but somewhere else.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous series introduced warnings to multiple places, but it
could become tiring to see the warning on the same path over and
over again during a single run of Git. Making just one function
responsible for issuing this warning, we could later choose to keep
track of which paths we issued a warning (it would involve a hash
table of paths after running them through real_path() or something)
in order to reduce noise.
Right now we do not know if the noise reduction is necessary, but it
still would be a good code reduction/sharing anyway.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before reading a config file, we check "!access(path, R_OK)"
to make sure that the file exists and is readable. If it's
not, then we silently ignore it.
For the case of ENOENT, this is fine, as the presence of the
file is optional. For other cases, though, it may indicate a
configuration error (e.g., not having permissions to read
the file). Let's print a warning in these cases to let the
user know.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When getpwuid fails, we give a cute but cryptic message.
While it makes sense if you know that getpwuid or identity
functions are being called, this code is triggered behind
the scenes by quite a few git commands these days (e.g.,
receive-pack on a remote server might use it for a reflog;
the current message is hard to distinguish from an
authentication error). Let's switch to something that gives
a little more context.
While we're at it, we can factor out all of the
cut-and-pastes of the "you don't exist" message into a
wrapper function. Rather than provide xgetpwuid, let's make
it even more specific to just getting the passwd entry for
the current uid. That's the only way we use getpwuid anyway,
and it lets us make an even more specific error message.
The current message also fails to mention errno. While the
usual cause for getpwuid failing is that the user does not
exist, mentioning errno makes it easier to diagnose these
problems. Note that POSIX specifies that errno remain
untouched if the passwd entry does not exist (but will be
set on actual errors), whereas some systems will return
ENOENT or similar for a missing entry. We handle both cases
in our wrapper.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
New test cases list commands that should work when memory is
limited. All memory allocation functions (*) learn to reject any
allocation larger than $GIT_ALLOC_LIMIT if set.
(*) Not exactly all. Some places do not use x* functions, but
malloc/calloc directly, notably diff-delta. These code path should
never be run on large blobs.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The read_in_full function repeatedly calls read() to fill a
buffer. If the first read() returns an error, we notify the
caller by returning the error. However, if we read some data
and then get an error on a subsequent read, we simply return
the amount of data that we did read, and the caller is
unaware of the error.
This makes the tradeoff that seeing the partial data is more
important than the fact that an error occurred. In practice,
this is generally not the case; we care more if an error
occurred, and should throw away any partial data.
I audited the current callers. In most cases, this will make
no difference at all, as they do:
if (read_in_full(fd, buf, size) != size)
error("short read");
However, it will help in a few cases:
1. In sha1_file.c:index_stream, we would fail to notice
errors in the incoming stream.
2. When reading symbolic refs in resolve_ref, we would
fail to notice errors and potentially use a truncated
ref name.
3. In various places, we will get much better error
messages. For example, callers of safe_read would
erroneously print "the remote end hung up unexpectedly"
instead of showing the read error.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename the make_*_path functions so it's clearer what they do, in
particlar make clear what the differnce between make_absolute_path and
make_nonrelative_path is by renaming them real_path and absolute_path
respectively. make_relative_path has an understandable name and is
renamed to relative_path to maintain the name convention.
The function calls have been replaced 1-to-1 in their usage.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The idiom (a + b < a) works fine for detecting that an unsigned
integer has overflowed, but a more explicit
unsigned_add_overflows(a, b)
might be easier to read.
Define such a macro, expanding roughly to ((a) < UINT_MAX - (b)).
Because the expansion uses each argument only once outside of sizeof()
expressions, it is safe to use with arguments that have side effects.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before, when creating a temporary file failed, a generic 'Unable to create
temporary file' message was printed. In some cases this could lead to
confusion as to which directory should be checked for correct permissions etc.
This patch adds the template for the temporary filename to the error message,
converting it to an absolute path if needed. A test verifies that the template
is indeed printed when pointing to a nonexistent or unwritable directory.
A copy of the original template is made in case mkstemp clears the template.
Signed-off-by: Arnout Engelen <arnouten@bzzt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This way, the next caller that wants to disable our memory reclamation
machinery does not have to define its own do_nothing() stub.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As v1.7.0-rc0~43 (slim down "git show-index", 2010-01-21) explains,
use of xmalloc() brings in a dependency on zlib, the sha1 lib, and the
rest of git's object file access machinery via try_to_free_pack_memory.
That is overkill when xmalloc is just being used as a convenience
wrapper to exit when no memory is available.
So defer setting try_to_free_pack_memory as try_to_free_routine until
the first packfile is opened in add_packed_git().
After this change, a simple program using xmalloc() and no other
functions will not pull in any code from libgit.a aside from wrapper.o
and usage.o.
Improved-by: René Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Programs using xmalloc() but not git_inflate() require -lz on the
linker command line because git_inflate() is in the same translation
unit as xmalloc().
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git_mkstemp_mode and related functions do not require access to
specialized git machinery, unlike some other functions from
path.c (like set_shared_perm()). Move them to wrapper.c where
the wrapper xmkstemp_mode is defined.
This eliminates a dependency of wrapper.o on environment.o via
path.o. With typical linkers (e.g., gcc), that dependency makes
programs that use functions from wrapper.o and not environment.o
or path.o larger than they need to be.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The odb_mkstemp and odb_pack_keep functions open files under the
$GIT_OBJECT_DIRECTORY directory. This requires access to the git
configuration which very simple programs do not need.
Move these functions to environment.o, closer to their dependencies.
This should make it easier for programs to link to wrapper.o without
linking to environment.o.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
wrapper.o depends on sha1_file.o for a number of reasons. One is
release_pack_memory().
xmmap function calls mmap, discarding unused pack windows when
necessary to relieve memory pressure. Simple git programs using
wrapper.o as a friendly libc do not need this functionality.
So move xmmap to sha1_file.o, where release_pack_memory() is.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Out-of-memory errors can either be actual lack of memory, or bugs (like
code trying to call xmalloc(-1) by mistake). A little more information
may help tracking bugs reported by users.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/try-to-free-stackable:
Do not call release_pack_memory in malloc wrappers when GIT_TRACE is used
Have set_try_to_free_routine return the previous routine
This effectively requires from the callers of set_try_to_free_routine to
treat the try-to-free-routines as a stack.
We will need this for the next patch where the only current caller cannot
depend on that the previously set routine was the default routine.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch introduces the remove_or_warn function which is a
generalised version of the {unlink,rmdir}_or_warn functions. It takes
an additional parameter indicating the mode of the file to be removed.
The patch also modifies certain functions to use remove_or_warn
where appropriate, and adds a test case for a bug fixed by the use
of remove_or_warn.
Signed-off-by: Peter Collingbourne <peter@pcc.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch implements an rmdir_or_warn function (like unlink_or_warn
but for directories) that uses the generalised warning code in
warn_if_unremovable.
Signed-off-by: Peter Collingbourne <peter@pcc.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch moves the warning code of the unlink_or_warn function into
a separate function named warn_if_unremovable so that it may be reused.
Signed-off-by: Peter Collingbourne <peter@pcc.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By providing a hook for the routine responsible for trying to free some
memory on malloc failure, we can ensure that the called routine is
protected by the appropriate locks when threads are in play.
The obvious offender here was pack-objects which was calling xmalloc()
within threads while release_pack_memory() is not thread safe.
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We used to create 0600 files, and then use chmod to set the group and
other permission bits to the umask. This usually has the same effect
as a normal file creation with a umask.
But in the presence of ACLs, the group permission plays the role of
the ACL mask: the "g" bits of newly created files are chosen according
to default ACL mask of the directory, not according to the umask, and
doing a chmod() on these "g" bits affect the ACL's mask instead of
actual group permission.
In other words, creating files with 0600 and then doing a chmod to the
umask creates files which are unreadable by users allowed in the
default ACL. To create the files without breaking ACLs, we let the
umask do it's job at the file's creation time, and get rid of the
later chmod.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
gitmkstemps emulates the behavior of mkstemps, which is usually used
to create files in a shared directory like /tmp/, hence, it creates
files with permission 0600.
Add git_mkstemps_mode() that allows us to specify the desired mode, and
make git_mkstemps() a wrapper that always uses 0600 to call it. Later we
will use git_mkstemps_mode() when creating pack files.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add routine for allocating NUL-terminated memory block without risking
integer overflow in addition of +1 for NUL byte.
[jc: with suggestion from Bill Lear]
Signed-off-by: Ilari Liusvaara <ilari.liusvaara@elisanet.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change calls to die(..., strerror(errno)) to use the new die_errno().
In the process, also make slight style adjustments: at least state
_something_ about the function that failed (instead of just printing
the pathname), and put paths in single quotes.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This seem to be a very common pattern in the current code.
The function prints a generic removal failure message, the file name
which failed and readable errno presentation. The function preserves
errno and always returns the value unlink(2) returned, but prints
no message for ENOENT, as it was the most often filtered out in the
code calling unlink. Besides, removing a file is anyway the purpose of
calling unlink.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The AIX mkstemp() modifies its template parameter to an empty string if
the call fails. The existing code had already recomputed the template,
but too late to be good.
See also 6ff6af62, which fixed this problem in a different spot.
Signed-off-by: Mike Ralphson <mike@abacus.co.uk>
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a repository created with git older than f49fb35 (git-init-db: create
"pack" subdirectory under objects, 2005-06-27), objects/pack/ directory is
not created upon initialization. It was Ok because subdirectories are
created as needed inside directories init-db creates, and back then,
packfiles were recent invention.
After the said commit, new codepaths started relying on the presense of
objects/pack/ directory in the repository. This was exacerbated with
8b4eb6b (Do not perform cross-directory renames when creating packs,
2008-09-22) that moved the location temporary pack files are created from
objects/ directory to objects/pack/ directory, because moving temporary to
the final location was done carefully with lazy leading directory creation.
Many packfile related operations in such an old repository can fail
mysteriously because of this.
This commit introduces two helper functions to make things work better.
- odb_mkstemp() is a specialized version of mkstemp() to refactor the
code and teach it to create leading directories as needed;
- odb_pack_keep() refactors the code to create a ".keep" file while
create leading directories as needed.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
R. Tyler Ballance reported a mysterious transient repository corruption;
after much digging, it turns out that we were not catching and reporting
memory allocation errors from some calls we make to zlib.
This one _just_ wraps things; it doesn't do the "retry on low memory
error" part, at least not yet. It is an independent issue from the
reporting. Some of the errors are expected and passed back to the caller,
but we die when zlib reports it failed to allocate memory for now.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A few compat/* layer functions call these functions, but we would really
want to keep them thin, without depending too much on the libgit proper.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
So I was looking at the disgusting size of the git binary, and even with
the debugging removed, and using -Os instead of -O2, the size of the text
section was pretty high. In this day and age I guess almost a megabyte of
text isn't really all that surprising, but it still doesn't exactly make
me think "lean and mean".
With -Os, a surprising amount of text space is wasted on inline functions
that end up just being replicated multiple times, and where performance
really isn't a valid reason to inline them. In particular, the trivial
wrapper functions like "xmalloc()" are used _everywhere_, and making them
inline just duplicates the text (and the string we use to 'die()' on
failure) unnecessarily.
So this just moves them into a "wrapper.c" file, getting rid of a tiny bit
of unnecessary bloat. The following numbers are both with "CFLAGS=-Os":
Before:
[torvalds@woody git]$ size git
text data bss dec hex filename
700460 15160 292184 1007804 f60bc git
After:
[torvalds@woody git]$ size git
text data bss dec hex filename
670540 15160 292184 977884 eebdc git
so it saves almost 30k of text-space (it actually saves more than that
with the default -O2, but I don't think that's necessarily a very relevant
number from a "try to shrink git" standpoint).
It might conceivably have a performance impact, but none of this should be
_that_ performance critical. The real cost is not generally in the wrapper
anyway, but in the code it wraps (ie the cost of "xread()" is all in the
read itself, not in the trivial wrapping of it).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
