This allows you to say
git send-pack $URL :refs/heads/$branch
to delete the named remote branch. The refspec $src:$dst means
replace the destination ref with the object known as $src on the
local side, so this is a natural extension to make an empty $src
mean "No object" to delete the target.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This allows one to see a root commit as a diff in commands like git-log,
git-show and git-whatchanged.
Signed-off-by: Peter Baumann <Peter.B.Baumannn@stud.informatik.uni-erlangen.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
An earlier commit f28b34a broke symlinks when trust-executable-bit
is not set because it incorrectly assumed that everything was a
regular file.
Reported by Juergen Ruehle.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This side-ports commit fd19f620 from Cogito, in which I fixed
exactly the same bug. Somehow nobody noticed this for a long
time in git.
Signed-off-by: Junio C Hamano <junkio@cox.net>
We used to complain that we cannot merge anything we fetched
with a local branch that does not exist yet. Just treat the
case as a natural extension of fast forwarding and make the
local branch'es tip point at the same commit we just fetched.
After all an empty repository without an initial commit is an
ancestor of any commit.
[jc: I added a trivial test. We've become sloppy but we should
stick to the discipline of covering new behaviour with new
tests. ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
Rework cvsexportcommit to handle binary files for all cases.
Catch errors when writing an index that contains invalid objects.
test-lib.sh: A command dying due to a signal is an unexpected failure.
git-update-index(1): fix use of quoting in section title
Also adds test cases for adding removing and deleting
binary and text files plus two tests for the checks on
binary files.
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If git-write-index is called without --missing-ok, it reports invalid
objects that it finds in the index. But without this patch it dies
right away or may run into an infinite loop.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When test_expect_failure detects that a command failed, it still has to
treat a program that crashed from a signal as unexpected failure.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
git-rebase: Use --ignore-if-in-upstream option when executing git-format-patch.
git-svn: fix dcommit losing changes when out-of-date from svn
git-svn: don't die on rebuild when --upgrade is specified
git-svn: avoid printing filenames of files we're not tracking
There was a bug in dcommit (and commit-diff) which caused deltas
to be generated against the latest version of the changed file
in a repository, and not the revision we are diffing (the tree)
against locally.
This bug can cause recent changes to the svn repository to be
silently clobbered by git-svn if our repository is out-of-date.
Thanks to Steven Grimm for noticing the bug.
The (few) people using the commit-diff command are now required
to use the -r/--revision argument. dcommit usage is unchanged.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Just make it take over blame's place. Documentation and command
have all stopped mentioning "git-pickaxe". The built-in synonym
is left in the command table, so you can still say "git pickaxe",
but it probably is a good idea to retire it as well.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* jc/read-tree:
t6022: ignoring untracked files by merge-recursive when they do not matter
merge-recursive: adjust to loosened "working file clobbered" check
merge-recursive: make a few functions static.
merge-recursive: use abbreviated commit object name.
merge: loosen overcautious "working file will be lost" check.
* lj/refs: (63 commits)
Fix show-ref usagestring
t3200: git-branch testsuite update
sha1_name.c: avoid compilation warnings.
Make git-branch a builtin
ref-log: fix D/F conflict coming from deleted refs.
git-revert with conflicts to behave as git-merge with conflicts
core.logallrefupdates thinko-fix
git-pack-refs --all
core.logallrefupdates create new log file only for branch heads.
Remove bashism from t3210-pack-refs.sh
ref-log: allow ref@{count} syntax.
pack-refs: call fflush before fsync.
pack-refs: use lockfile as everybody else does.
git-fetch: do not look into $GIT_DIR/refs to see if a tag exists.
lock_ref_sha1_basic does not remove empty directories on BSD
Do not create tag leading directories since git update-ref does it.
Check that a tag exists using show-ref instead of looking for the ref file.
Use git-update-ref to delete a tag instead of rm()ing the ref file.
Fix refs.c;:repack_without_ref() clean-up path
Clean up "git-branch.sh" and add remove recursive dir test cases.
...
The three-way merge complained unconditionally when a path that
does not exist in the index is involved in a merge when it
existed in the working tree. If we are merging an old version
that had that path tracked, but the path is not tracked anymore,
and if we are merging that old version in, the result will be
that the path is not tracked. In that case we should not
complain.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
xdiff: Match GNU diff behaviour when deciding hunk comment worthiness of lines
Update cherry documentation.
Refer to git-rev-parse:Specifying Revisions from git.txt
git-fetch.sh printed protocol fix
RPM package re-classification.
Documentation: note about contrib/.
git-svn: fix symlink-to-file changes when using command-line svn 1.4.0
Set $HOME for selftests
The test expected "git branch --help" to exit successfully, but
built-ins spawn "man" when given --help, and when the test is
run, manpages may not be installed yet and "man" can legally
exit non-zero in such a case.
Also the new implementation logs "Created from master", instead
of "Created from HEAD" in the reflog, which makes a lot more
sense, so adjust the test to match that.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Currently it does what git-blame does, but only faster.
More importantly, its internal structure is designed to support
content movement (aka cut-and-paste) more easily by allowing
more than one paths to be taken from the same commit.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The latest GNU diff from CVS emits an empty line to express
an empty context line, instead of more traditional "single
white space followed by a newline". Do not get broken by it.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
After deleting a branch l/k, you should be able to create a
branch l. Earlier we added remove_empty_directories() on the
ref creation side to remove leftover .git/refs/l directory but
we also need a matching code to remove .git/logs/refs/l
directory.
Signed-off-by: Junio C Hamano <junkio@cox.net>
the repository argument for git-clone should be relative to $PWD
instead of the given target directory. The old behavior gave us
surprising success and you need a few minute to know why it worked.
GIT_DIR is already exported so no need to cd into $D. And this makes
$PWD for git-fetch-pack, which is the actual command to take the given
repository dir, the same as git-clone.
Signed-off-by: Yasushi SHOJI <yashi@atmark-techno.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When whitespace or whitespace change was ignored, the function
xdl_recmatch() returned memcmp() style differences, which is wrong,
since it should return 0 on non-match.
Also, there were three horrible off-by-one bugs, even leading to wrong
hashes in the whitespace special handling.
The issue was noticed by Ray Lehtiniemi.
For good measure, this commit adds a test.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This changes 'git-pack-refs' to pack only tags by default.
Branches are meant to be updated, either by committing onto it
yourself or tracking remote branches, and packed entries can
become stale easily, but tags are usually "create once and live
forever" and benefit more from packing.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add symlink support to ZIP file creation, and a few tests.
This implementation sets the "version made by" field
(creator_version) to Unix for symlinks, only; regular files and
directories are still marked as originating from FAT/VFAT/NTFS.
Also set "external file attributes" (attr2) to 0 for regular
files and 16 for directories (FAT attribute), and to the file
mode for symlinks.
We could always set the creator_version to Unix and include the
mode, but then Info-ZIP unzip would set the mode of the extracted
files to *exactly* the value stored in attr2. The FAT trick
makes it apply the umask instead. Note: FAT has no executable
bit, so this information is not stored in the ZIP file.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When running tests with --verbose it is difficult to see where
one test starts and where it ends because everything is printed
in one big lump.
Fix that by printing one single newline between each test.
Signed-off-by: Martin Waitz <tali@admingilde.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This bashism makes the test fail if /bin/sh is not bash.
Signed-off-by: Dennis Stosberg <dennis@stosberg.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This makes "git log/diff --summary" imply recursive behaviour,
whose effect is summarized in one test output:
--- a/t/t4013/diff.diff-tree_--pretty_--root_--summary_initial
+++ b/t/t4013/diff.diff-tree_--pretty_--root_--summary_initial
@@ -5,7 +5,7 @@ Date: Mon Jun 26 00:00:00 2006 +0000
Initial
- create mode 040000 dir
+ create mode 100644 dir/sub
create mode 100644 file0
create mode 100644 file2
$
When a file is created in a subdirectory, we used to say just
the directory name only when that directory also was created,
which did not make sense from two reasons. It is not any more
significant to create a new file in a new directory than to
create a new file in an existing directory, and even if it were,
reportinging the new directory name without saying the actual
filename is not useful.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* master: (99 commits)
lock_ref_sha1_basic does not remove empty directories on BSD
git-push: .git/remotes/ file does not require SP after colon
git-mv: invalidate the removed path properly in cache-tree
Makefile: install and clean merge-recur, still.
GIT 1.4.3-rc1
gitweb: tree view: hash_base and hash are now context sensitive
git-diff -B output fix.
fetch: Reset remote refs list each time fetch_main is called
Remove -fPIC which was only needed for Git.xs
Fix approxidate() to understand 12:34 AM/PM are 00:34 and 12:34
git-diff -B output fix.
Make cvsexportcommit remove files.
diff --stat: ensure at least one '-' for deletions, and one '+' for additions
diff --stat=width[,name-width]: allow custom diffstat output width.
gitweb: History: blob and tree are first, then commitdiff, etc
gitweb: Remove redundant "commit" from history
http/ftp: optionally ask curl to not use EPSV command
gitweb: Don't use quotemeta on internally generated strings
gitweb: Add snapshot to shortlog
gitweb: Factor out gitweb_have_snapshot()
...
The command updated the cache without invalidating the cache
tree entries while removing an existing entry.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Now that directory recursive remove works in the core C code, we
don't need to do it in "git-branch.sh".
Also add test cases to check that directory recursive remove will
continue to work.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* jc/gitpm: (52 commits)
Remove -fPIC which was only needed for Git.xs
Git.pm: Kill Git.xs for now
Revert "Make it possible to set up libgit directly (instead of from the environment)"
Revert "Git.pm: Introduce fast get_object() method"
Revert "Convert git-annotate to use Git.pm"
Fix compilation with Sun CC
pass DESTDIR to the generated perl/Makefile
Eliminate Scalar::Util usage from private-Error.pm
Convert git-annotate to use Git.pm
Git.pm: Introduce fast get_object() method
Make it possible to set up libgit directly (instead of from the environment)
Work around sed and make interactions on the backslash at the end of line.
Git.pm: Introduce ident() and ident_person() methods
Convert git-send-email to use Git.pm
Git.pm: Add config() method
Use $GITPERLLIB instead of $RUNNING_GIT_TESTS and centralize @INC munging
INSTALL: a tip for running after building but without installing.
Perly Git: make sure we do test the freshly built one.
Git.pm: Don't #define around die
Git.xs: older perl do not know const char *
...
Some of these test cases are from Junio.
One test case is commented out because it doesn't work right now.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* master: (72 commits)
runstatus: do not recurse into subdirectories if not needed
grep: fix --fixed-strings combined with expression.
grep: free expressions and patterns when done.
Corrected copy-and-paste thinko in ignore executable bit test case.
An illustration of rev-list --parents --pretty=raw
Allow git-checkout when on a non-existant branch.
gitweb: Decode long title for link tooltips
git-svn: Fix fetch --no-ignore-externals with GIT_SVN_NO_LIB=1
Ignore executable bit when adding files if filemode=0.
Remove empty ref directories that prevent creating a ref.
Use const for interpolate arguments
git-archive: update documentation
Deprecate merge-recursive.py
gitweb: fix over-eager application of esc_html().
Allow '(no author)' in git-svn's authors file.
Allow 'svn fetch' on '(no date)' revisions in Subversion.
git-repack: allow git-repack to run in subdirectory
Remove upload-tar and make git-tar-tree a thin wrapper to git-archive
git-tar-tree: Move code for git-archive --format=tar to archive-tar.c
git-tar-tree: Remove duplicate git_config() call
...
This test should be testing update-index --add, not git-add as the
latter is implemented in terms of the former.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This script creates two separate histories, A and B, each of
which does:
(A0, B0): create fileA and subdir/fileB
(A1, B1): modify fileA
(A2, B2): modify subdir/fileB
and then grafts them together to make B0 a child of A2. So
the final history looks like (time flows from top to bottom):
true parent touches subdir?
A0 none yes (creates it)
A1 A0 no
A2 A1 yes
B0 none yes (different from what's in A2)
B1 B0 no
B2 B1 yes
"git rev-list --parents --pretty=raw B2" would give "fake"
parents on the "commit " header lines while "parent " header
lines show the parent as recorded in the commit object (i.e. B0
appears to have A2 as its parent on "commit " header but there
is no "parent A2" header line in it).
When you have path limiters, we simplify history to omit
commits that do not affect the specified paths.
So "git rev-list --parents --pretty=raw B2 subdir" would return
"B2 B0 A2 A0" (because B1 and A1 do not touch the path). When
it does so, the "commit " header lines have "fake" parents
(i.e. B2 appears to have B0 as its parent on "commit " header),
but you can still get the true parents by looking at "parent "
header.
Signed-off-by: Junio C Hamano <junkio@cox.net>
I've seen some users get into situtations where their HEAD
symbolic-ref is pointing at a non-existant ref. (Sometimes this
happens during clone when the remote repository lacks a 'master'
branch.) If this happens the user is unable to use git-checkout
to switch branches as there is no prior commit to merge from.
So instead of giving the user low-level errors about how HEAD
can't be resolved and how not a single revision was given change
the type of checkout to be a force and go through with the user's
request anyway.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If the user has configured core.filemode=0 then we shouldn't set
the execute bit in the index when adding a new file as the user
has indicated that the local filesystem can't be trusted.
This means that when adding files that should be marked executable
in a repository with core.filemode=0 the user must perform a
'git update-index --chmod=+x' on the file before committing the
addition.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch also adds test cases from Linus and Junio.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This renames merge-recursive written in Python to merge-recursive-old,
and makes merge-recur as a synonym to merge-recursive. We do not remove
merge-recur yet, but we will remove merge-recur and merge-recursive-old
in a few releases down the road.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When there are single-character filenames in the test directory,
the shell tries to expand regexps meant for tr.
Signed-off-by: Junio C Hamano <junkio@cox.net>
[jc: with a fix to config handling in t5400 test, which took
annoyingly long to diagnose.]
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
It depended on specific error messages to detect failure but the
implementation changed and broke the test. This fixes the breakage
minimally.
Signed-off-by: Junio C Hamano <junkio@cox.net>
In "git-apply", we have a few sanity checks and heuristics that
expects that the patch fed to us is a unified diff with at least
one line of context.
* When there is no leading context line in a hunk, the hunk
must apply at the beginning of the preimage. Similarly, no
trailing context means that the hunk is anchored at the end.
* We learn a patch deletes the file from a hunk that has no
resulting line (i.e. all lines are prefixed with '-') if it
has not otherwise been known if the patch deletes the file.
Similarly, no old line means the file is being created.
And we declare an error condition when the file created by a
creation patch already exists, and/or when a deletion patch
still leaves content in the file.
These sanity checks are good safety measures, but breaks down
when people feed a diff generated with --unified=0. This was
recently noticed first by Matthew Wilcox and Gerrit Pape.
This adds a new flag, --unified-zero, to allow bypassing these
checks. If you are in control of the patch generation process,
you should not use --unified=0 patch and fix it up with this
flag; rather you should try work with a patch with context. But
if all you have to work with is a patch without context, this
flag may come handy as the last resort.
Signed-off-by: Junio C Hamano <junkio@cox.net>
I had a hard time figuring out why this test was failing with
the packed-refs update without running it under "sh -x". This
makes output from "sh t1400-update-ref.sh -v" more descriptive.
Updating other tests would be a good janitorial task.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Historically we did not allow binary patch applied without an
explicit permission from the user, and this flag was the way to
do so. This makes the flag a no-op by always allowing binary
patch application.
Signed-off-by: Junio C Hamano <junkio@cox.net>
If GIT_TRACE is set to an absolute path (starting with a
'/' character), we interpret this as a file path and we
trace into it.
Also if GIT_TRACE is set to an integer value greater than
1 and lower than 10, we interpret this as an open fd value
and we trace into it.
Note that this behavior is not compatible with the
previous one.
We also trace whole messages using one write(2) call to
make sure messages from processes do net get mixed up in
the middle.
This patch makes it possible to get trace information when
running "make test".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The intention of the test seems to be to build a long chain of
clones that locally borrow objects from their parents and see the
system give up dereferencing long chains. There were two problems:
(1) it did not test the right repository;
(2) it did not build a chain long enough to trigger the limitation.
I do not think it is a good test to make sure the limitation the
current implementation happens to have still exists, but that is
a topic at a totally different level.
At least this fixes the broken test.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Since the normalized basename of "." is "", the check for directory
failed erroneously.
Noticed by Fredrik Kuivinen.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
With the new flag "--reject", hunks that do not apply are sent to
the standard output, and the usable hunks are applied. The command
itself exits with non-zero status when this happens, so that the
user or wrapper can take notice and sort the remaining mess out.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
finish_connect(): thinkofix
git-mv: succeed even if source is a prefix of destination
Solaris does not support C99 format strings before version 10
As noted by Fredrik Kuivinen, without this patch, git-mv fails on
git-mv README README-renamed
because "README" is a prefix of "README-renamed".
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* master: (166 commits)
git-apply --binary: clean up and prepare for --reverse
Fix detection of ipv6 on Solaris
Look for sockaddr_storage in sys/socket.h
Solaris has strlcpy() at least since version 8
git-apply --reverse: simplify reverse option.
t4116 apply --reverse test
Make sha1flush void and remove conditional return.
Make upload_pack void and remove conditional return.
Make track_tree_refs void.
Make pack_objects void.
Make fsck_dir void.
Make checkout_all void.
Make show_entry void
Make pprint_tag void and cleans up call in cmd_cat_file.
Remove combine-diff.c::uninteresting()
read-cache.c cleanup
http-push.c cleanup
diff.c cleanup
builtin-push.c cleanup
builtin-grep.c cleanup
...
The binary patch test needs to be made more careful not to have
the postimage blob in the repository in which the patch is applied
Signed-off-by: Junio C Hamano <junkio@cox.net>
By default, the command shows pathnames relative to the current
directory. Use --full-name (the same flag to do so in ls-files)
if you want to see the full pathname relative to the project root.
This makes it very pleasant to run in Emacs compilation (or
"grep-find") buffer.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The internal representation of the result is counted string
(i.e. char *buf and ulong size), which is fine for writing out
to regular file, but throwing the buf at symlink(2) was a
no-no.
Reported by Willy Tarreau.
Signed-off-by: Junio C Hamano <junkio@cox.net>
We used to find the first match of the pattern and then if the
match is not for the entire word, declared that the whole line
does not match.
But that is wrong. The command "git grep -w -e mmap" should
find that a line "foo_mmap bar mmap baz" matches, by tring the
second instance of pattern "mmap" on the same line.
Problems an earlier round of "fix" had were pointed out by Morten
Welinder, which have been incorporated in the t7002 tests.
Signed-off-by: Junio C Hamano <junkio@cox.net>
We still have too few of them, but we have to start from somewhere.
The general rule is to make tests easy to debug when run with -v (notice
use of seemingly useless echo everywhere in the new tests).
Signed-off-by: Junio C Hamano <junkio@cox.net>
The cmd_usage() routine was causing warning messages due to a NULL
format parameter being passed in three out of four calls. This is a
problem if you want to compile with -Werror. A simple solution is to
simply remove the GNU __attribute__ format pragma from the cmd_usage()
declaration in the header file. The function interface was somewhat
muddled anyway, so re-write the code to finesse the problem.
[jc: this incidentally revealed that t9100 test assumed that the output
from "git help" to be fixed in stone, but this patch lower-cases
"Usage" to "usage". Update the test not to rely on "git help" output.]
Signed-off-by: Ramsay Allan Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
These changes were originally part of the next patch, but have been
split out since they were peripheral to the main purpose of that patch.
- update comment describing the signature format to reflect
the current code.
- remove trailing \n in calls to error(), since a \n is already
provided by error().
- remove redundant call to get_sha1_hex().
- call sha1_to_hex(sha1) to convert to ascii, rather than attempting
to print the raw sha1.
The new tests provide a regression suite to support the modifications
to git-mktag in this and the next patch.
Signed-off-by: Ramsay Allan Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The t8001-annotate.sh test claimed all tests pass, when in fact
the git-annotate perl script failed to run! (prior to fixing the
script to work with perl 5.5).
Signed-off-by: Ramsay Allan Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Alex Riesen (raa.lkml@gmail.com) recently observed that git branch
would fail with no error message due to unexpected situations with
regards to refs. For example, if .git/refs/heads/gu is a file but
"git branch -b refs/heads/gu/fixa HEAD" was invoked by the user
it would fail silently due to refs/heads/gu being a file and not
a directory.
This change adds a test for trying to create a ref within a directory
that is actually currently a file, and adds error printing within
the ref locking routine should the resolve operation fail.
The error printing code probably belongs at this level of the library
as other failures within the ref locking, writing and logging code
are also currently at this level of the code.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The generated binary patch was _not_ binary -- earlier I made
the --full-index flag to imply binary patch generation to the diff
machinery, but later we made it independent from --binary (although
the latter implies the former).
Signed-off-by: Junio C Hamano <junkio@cox.net>
This fixes the builtin mv for the test which Josef provided, and also
fixes moving directories into existing directories, as noted by Jon Smirl.
In case the destination exists, fail early (this cannot be overridden
by -f).
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If dir2 already exists, git-mv should move dir1 _into_dir2/.
Noticed by Jon Smirl.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* ew/apply:
Fix t4114 on cygwin
apply: handle type-changing patch correctly.
apply: split out removal and creation into different phases.
apply: check D/F conflicts more carefully.
typechange tests for git apply (currently failing)
Linus:
get_pathspec() does turn '.' into an empty string (which is
correct - git internally does _not_ ever understand the notion of
"." as the current working directory), but it doesn't ever do the
optimization of noticing that a pathspec that consists solely of
an empty string is "equivalent" to an empty pathspec.
The test is to ensure that this behaviour stays.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
I've found that git apply is incapable of handling patches
involving object type changes to the same path.
Of course git itself is perfectly capable of making commits that
generate these changes, as it only tracks trees states. It's
just that the diffs between them are less useful if they can't
be applied.
Some of these are rare, but I've hit one of them (file becoming
a symlink) recently in real-world usage, and was inspired to
find more potential breakages :)
I'm not sure when I'll have time to fix these myself and I'm not
very familiar with the apply code. So if someone could get
some or all of these cases working, they would be my hero :)
Some of these are what I would refer to as corner-cases from
hell. Most (if not all) other systems fail some of these. In
fact, they aren't even capable of representing most of these
changes in their histories; much less being able to handle
patches to that effect.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This changes one test commit in the sequence to have more than
one lines of commit log. A few output formats (--pretty=email
aka format-patch and --pretty=oneline) need to behave
differently on single and multi-line log, and this change will
help catching breakages.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* ml/trace:
test-lib: unset GIT_TRACE
GIT_TRACE: fix a mixed declarations and code warning
GIT_TRACE: show which built-in/external commands are executed
This way we don't have to remember to set it for each test; and
if we forget, we won't cause interactive editors to be spawned
for non-interactive tests.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If committing a merge (.git/MERGE_HEAD exists), an initial tree
(no HEAD) or using --amend to amend the prior commit then denote
the subtype of commit in the reflog. This helps to distinguish
amended or merge commits from normal commits.
In the case of --amend the prior sha1 is probably the commit which
is being thrown away in favor of the new commit. Since it is likely
that the old commit doesn't have any ref pointing to it anymore
it can be interesting to know why that the commit was replaced
and orphaned.
In the case of a merge the prior sha1 is probably the first parent
of the new merge commit. Consequently having its prior sha1 in the
reflog is slightly less interesting but its still informative to
know the commit was the result of a merge which had to be completed
by hand.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The only visible change is that git-blame doesn't understand
"--compability" anymore, but it does accept "--compatibility" instead,
which is already documented.
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Check for SVN::Core so test 910[45] don't fail if the user
doesn't have those installed.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Allow NO_SVN_TESTS to be defined to skip git-svn tests. These
tests are time-consuming due to SVN being slow, and even more so
if SVN Perl libraries are not available.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* th/diff:
builtin-diff: turn recursive on when defaulting to --patch format.
t4013: note improvements brought by the new output code.
t4013: add format-patch tests.
format-patch: fix diff format option implementation
combine-diff.c: type sanity.
t4013 test updates for new output code.
Fix some more diff options changes.
Fix diff-tree -s
log --raw: Don't descend into subdirectories by default
diff-tree: Use ---\n as a message separator
Print empty line between raw, stat, summary and patch
t4013: add more tests around -c and --cc
whatchanged: Default to DIFF_FORMAT_RAW
Don't xcalloc() struct diffstat_t
Add msg_sep to diff_options
DIFF_FORMAT_RAW is not default anymore
Set default diff output format after parsing command line
Make --raw option available for all diff commands
Merge with_raw, with_stat and summary variables to output_format
t4013: add tests for diff/log family output options.
As long as we do not need to readline from the terminal, we
should not barf when starting up the program. Without this
patch, t9001 test on Cygwin occasionally died with the following
error message:
Unable to get Terminal Size. The TIOCGWINSZ ioctl didn't work. The COLUMNS and LINES environment variables didn't work. The resize program didn't work. at /usr/lib/perl5/vendor_perl/5.8/cygwin/Term/ReadKey.pm line 362.
Compilation failed in require at /usr/lib/perl5/vendor_perl/5.8/Term/ReadLine/Perl.pm line 58.
Acked-by: Ryan Anderson <ryan@michonline.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is a bug fix, and cleans up one or two other things spotted during the
course of tracking down the main bug here.
Also, the test-suite is updated to reflect this case.
Signed-off-by: Ryan Anderson <ryan@michonline.com>
(cherry picked from 2f7554b4db3ab2c2d3866b160245c91c9236fc9a commit)
Signed-off-by: Junio C Hamano <junkio@cox.net>
This makes the Git perl scripts check $GITPERLLIB instead of
$RUNNING_GIT_TESTS, which makes more sense if you are setting up your shell
environment to use a non-installed Git instance.
It also weeds out the @INC munging from the individual scripts and makes
Makefile add it during the .perl files processing, so that we can change
just a single place when we modify this shared logic. It looks ugly in the
scripts, too. ;-)
And instead of doing arcane things with the @INC array, we just do 'use lib'
instead, which is essentialy the same thing anyway.
I first want to do three separate patches but it turned out that it's quite
a lot neater when bundled together, so I hope it's ok.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We could BEGIN { push @INC, '@@INSTLIBDIR@@'; } but that is not
a good idea for normal execution. The would prevent a
workaround for a user who is trying to override an old, faulty
Git.pm installed on the system path with a newer version
installed under $HOME/.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* js/patch:
diff.c: fix get_patch_id()
t4014: fix test commit labels.
format-patch: use clear_commit_marks() instead of some ad-hockery
t4014: fix for whitespace from "wc -l"
t4014: add format-patch --ignore-if-in-upstream test
format-patch: introduce "--ignore-if-in-upstream"
add diff_flush_patch_id() to calculate the patch id
The commit tag and commit comments used in the test claimed that
the #1 commit was merged upstream where the test actually let the
upstream merge #2 commit. Fix them.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When we updated "read-tree -m -u" to be careful about not
removing untracked working tree files, we broke "checkout -m" to
switch between branches.
Signed-off-by: Junio C Hamano <junkio@cox.net>
These are updates to the test vector that shows the "incompatibility" of
the new output code. The changes are actually the good ones, so instead
of keeping the older output we adjust the test to the new code.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Some "wc" insist on putting a TAB in front of the number.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Now that we control the merge base selection, we won't be forced
into rolling things in that we wanted to skip beforehand.
Also, add a test to ensure this all works as intended.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Enhance t3401-rebase-partial to test with --merge as well as
the standard am -3 strategy.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* ew/rebase:
rebase: error out for NO_PYTHON if they use recursive merge
Add renaming-rebase test.
rebase: Allow merge strategies to be used when rebasing
object-refs: avoid division by zero
recursive merge relies on Python, and we can't perform
rename-aware merges without the recursive merge. So bail out
before trying it.
The test won't work w/o recursive merge, either, so skip that,
too.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
There seems to be at least one implementation of Perl which requires the
user to specify an extension for backup files.
Reported by Alex Riesen.
Signed-off-by: Dennis Stosberg <dennis@stosberg.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When setting a config variable, git_config_set() ignored the variables
GIT_CONFIG and GIT_CONFIG_LOCAL. Now, when GIT_CONFIG_LOCAL is set, it
will write to that file. If not, GIT_CONFIG is checked, and only as a
fallback, the change is written to $GIT_DIR/config.
Add a test for it, and also future-proof the test for the upcoming
$HOME/.gitconfig support.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
These two tests assume that "sed" will not modify the final line of a
stream if it does not end with a newline character. The assumption is
not true at least for FreeBSD and Solaris 9. FreeBSD's "sed" appends
a newline character; "sed" in Solaris 9 even removes the incomplete
final line. This patch makes the test use perl instead.
Signed-off-by: Dennis Stosberg <dennis@stosberg.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Currently the test passes with 1.3.3 but not with the tip of
"master". This is to verify the fixes from Eric W Biedermann.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Some versions of "diff" (e.g. on FreeBSD and older Linux systems) do
not support the "\ No newline at end of file" remark and are not
able to generate the patches needed for this test. This lets the
test fail, although git-apply is working perfectly. This patch adds
the pre-generated patches to t/t4100/ and makes the test use them.
Signed-off-by: Dennis Stosberg <dennis@stosberg.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* sp/reflog:
fetch.c: do not pass uninitialized lock to unlock_ref().
Test that git-branch -l works.
Verify git-commit provides a reflog message.
Enable ref log creation in git checkout -b.
Create/delete branch ref logs.
Include ref log detail in commit, reset, etc.
Change order of -m option to update-ref.
Correct force_write bug in refs.c
Change 'master@noon' syntax to 'master@{noon}'.
Log ref updates made by fetch.
Force writing ref if it doesn't exist.
Added logs/ directory to repository layout.
General ref log reading improvements.
Fix ref log parsing so it works properly.
Support 'master@2 hours ago' syntax
Log ref updates to logs/refs/<ref>
Convert update-ref to use ref_lock API.
Improve abstraction of ref lock/write.
Moved the setup commands into test_expect_success blocks so their
output is hidden unless -v is used. This makes the test suite look
a little cleaner when the rm test-file setup step fails (and was
expected to fail for most cases).
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Using "-U0" is definitely more portable than using "--unified=0",
so we should do that regardless.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
pdksh doesn't need this patch, of course bash works fine since
that what most users use.
Normally, 'var=val command' seems to work fine with dash, but
perhaps there's something weird going on with "$@". dash is
pretty widespread, so it'll be good to support this even though
it does seem like a bug in dash.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
None of the variables seem to conflict, so local was unnecessary.
Also replaced ${var:pos:len} with the sed equivalent.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The use of heredoc inside quoted strings doesn't seem to be
supported by dash. pdksh seems to handle it fine, however.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
echo isn't remotely standardized for handling backslashes,
so cat + heredoc seems better
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If the user supplies -l to git-branch when creating a new branch
then the new branch's log should be created automatically and the
branch creation should be logged in that log.
Further if a branch is being deleted and it had a log then also
verify that the log was deleted.
Test git-checkout -b foo -l for creating a new branch foo with a
log and checking out that branch.
Fixed git-checkout -b foo -l as the branch variable name was
incorrect in the script.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The reflog message from git-commit should include the first line
of the commit message as supplied by the user.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* master: (90 commits)
fetch.c: remove an unused variable and dead code.
Clean up sha1 file writing
Builtin git-cat-file
builtin format-patch: squelch content-type for 7-bit ASCII
CMIT_FMT_EMAIL: Q-encode Subject: and display-name part of From: fields.
add more informative error messages to git-mktag
remove the artificial restriction tagsize < 8kb
git-rebase: use canonical A..B syntax to format-patch
git-format-patch: now built-in.
fmt-patch: Support --attach
fmt-patch: understand old <his> notation
Teach fmt-patch about --keep-subject
Teach fmt-patch about --numbered
fmt-patch: implement -o <dir>
fmt-patch: output file names to stdout
Teach fmt-patch to write individual files.
built-in tar-tree and remote tar-tree
Builtin git-diff-files, git-diff-index, git-diff-stages, and git-diff-tree.
Builtin git-show-branch.
Builtin git-apply.
...
When there is no leading context, the patch must match at the
beginning of preimage; otherwise there is a "patch adds these
lines while the other lines were added to the original file"
conflict.
This is the opposite of match_end fix earlier in this series.
Unlike matching at the end case, we can additionally check the
preimage line number recorded in the patch, so the change is not
symmetrical with the earlier one.
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-apply adding an ending line doesn't seem to fail if the ending line is
already present in the patched file.
Signed-off-by: Catalin Marinas <catalin.marinas@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Its ambiguous to parse "master@2006-05-17 18:30:foo" when foo is
meant as a file name and ":30" is meant as 30 minutes past 6 pm.
Therefore all date specifications in a sha1 expression must now
appear within brackets and the ':' splitter used for the path name
in a sha1 expression ignores ':' appearing within brackets.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Corrected the log starting time displayed in the error message
(as it was always showing the epoch due to a bad input to strtoul).
Improved the log parser so we only scan backwards towards the
'\n' from the end of the prior log; during this scan the last '>'
is remembered to improve performance (rather than scanning forward
to it).
If the log record matched is the last log record in the file only
use its new sha1 value if the date matches exactly; otherwise we
leave the passed in sha1 alone as it already contains the current
value of the ref. This way lookups of dates later than the log
end to stick with the current ref value in case the ref was updated
without logging.
If it looks like someone changed the ref without logging it and we
are going to return the sha1 which should have been valid during
the missing period then warn the user that there might be log data
missing and thus their query result may not be accurate. The check
isn't perfect as its just based on comparing the old and new sha1
values between the two log records but its better than not checking
at all.
Implemented test cases based on git-rev-parse for most of the
boundary conditions.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If config parameter core.logAllRefUpdates is true or the log
file already exists then append a line to ".git/logs/refs/<ref>"
whenever git-update-ref <ref> is executed. Each log line contains
the following information:
oldsha1 <SP> newsha1 <SP> committer <LF>
where committer is the current user, date, time and timezone in
the standard GIT ident format. If the caller is unable to append
to the log file then git-update-ref will fail without updating <ref>.
An optional message may be included in the log line with the -m flag.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When a merge results in a creation of a path that did not exist
in HEAD, and if you already have that path on the working tree,
because the index has not been told about the working tree file,
read-tree happily removes it. The issue was brought up by Santi
Béjar on the list.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* fix:
Fix pack-index issue on 64-bit platforms a bit more portably.
Install git-send-email by default
Fix compilation on newer NetBSD systems
git config syntax updates
Another config file parsing fix.
checkout: use --aggressive when running a 3-way merge (-m).
This updates the hierarchical section name syntax to
[section<space>+"<randomstring>"]
where the only rule for "randomstring" is that it can't contain a newline,
and if you really want to insert a double-quote, you do it with \".
It turns that into the section name "secion.randomstring". The
"section" part is still case insensitive, but the "randomstring"
part is case sensitive.
So you could use this for things like
[email "torvalds@osdl.org"]
name = Linus Torvalds
if you wanted to do the "email->name" conversion as part of the config
file format (I'm not claiming that is sensible, I'm just giving it as an
insane example). That would show up as the association
email.torvalds@osdl.org.name -> Linus Torvalds
which is easy to parse (the "." in the email _looks_ ambiguous, but it
isn't: you know that there will always be a single key-name, so you find
the key name with "strrchr(name, '.')" and things are entirely
unambiguous).
Repo-config is updated to be able to parse the new format, and also
write things out in the new format.
[jc: rolled two patches from Linus and one fix-up from Sean into one,
with additional adjustments for t/t1300 test to check the case
insensitiveness of section base and variable and case sensitiveness
of the extended section part. Then stripped some part off to make
the result applicable to the stale 1.3.X series that does not have
recent enhancements. ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Sean Estabrooks <seanlkml@sympatico.ca>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* fix:
repack: honor -d even when no new pack was created
clone: keep --reference even with -l -s
repo-config: document what value_regexp does a bit more clearly.
Release config lock if the regex is invalid
core-tutorial.txt: escape asterisk
Both -l -s and --reference update objects/info/alternates and used
to write over each other.
Signed-off-by: Martin Waitz <tali@admingilde.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
- correctly insert a new variable into a section that only
contains a single (different) variable.
- correctly insert a new section that matches the initial
substring of an existing section.
Signed-off-by: Sean Estabrooks <seanlkml@sympatico.ca>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When pathspecs are given, update-index --again further limits
the set of paths to be updated to those that match them.
Signed-off-by: Junio C Hamano <junkio@cox.net>
After running 'git-update-index' for some paths, you may want to
do the update on the same set of paths again.
The new flag --again checks the paths whose index entries are
are different from the HEAD commit and updates them from the
working tree contents.
This was brought up by Carl Worth on #git.
Signed-off-by: Junio C Hamano <junkio@cox.net>
With --get-regexp, output all key/value pairs where the key matches a
regexp. Example:
git-repo-config --get-regexp remote.*.url
will output something like
remote.junio.url git://git.kernel.org/pub/scm/git/git.git
remote.gitk.url git://git.kernel.org/pub/scm/gitk/gitk.git
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The "bind" commit can express an aggregation of multiple
projects into a single commit.
In such an organization, there would be one project, root of
whose tree object is at the same level of the root of the
aggregated projects, and other projects have their toplevel in
separate subdirectories. Let's call that root level project the
"primary project", and call other ones just "subprojects".
You would first read-tree the primary project, and then graft
the subprojects under their appropriate location using read-tree
--prefix=<subdir>/ repeatedly.
To write out a tree object from such an index for a subproject,
write-tree --prefix=<subdir>/ is used.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When we updated ls-tree recursive output to omit the tree nodes,
246cc52f38 adjusted the old test
so that we do not expect to see trees in its output. Later,
with 0f8f45cb4a, we added back the
ability to show both with -t option, but we forgot to update the
test as well.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The second installment to libify diff brothers. The pathname
arguments are checked more strictly than before because we now
use the revision.c::setup_revisions() infrastructure.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is the first installment to libify diff brothers.
The updated diff-files uses revision.c::setup_revisions()
infrastructure to parse its command line arguments, which means
the pathname arguments are checked more strictly than before.
The tests are adjusted to separate possibly missing paths from
the rest of arguments with double-dashes, to show the kosher
way.
As Linus pointed out, renaming diff.c to diff-lib.c was simply
stupid, so I am renaming it back. The new diff-lib.c is to
contain pieces extracted from diff brothers.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When running "git commit --amend" only to fix the commit log
message without any content change, we mistakenly showed the
git-status output that says "nothing to commit" without
commenting it out.
If you have already run update-index but you want to amend the
top commit, "git commit --amend --only" without any paths should
have worked, because --only means "starting from the base
commit, update-index these paths only to prepare the index to
commit, and perform the commit". However, we refused -o without
paths.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* lt/logopt:
Fix "git log --stat": make sure to set recursive with --stat.
combine-diff: show diffstat with the first parent.
git.c: LOGSIZE is unused after log printing cleanup.
Log message printout cleanups (#3): fix --pretty=oneline
Log message printout cleanups (#2)
Log message printout cleanups
rev-list --header: output format fix
Fixes for option parsing
log/whatchanged/show - log formatting cleanup.
Simplify common default options setup for built-in log family.
Tentative built-in "git show"
Built-in git-whatchanged.
rev-list option parser fix.
Split init_revisions() out of setup_revisions()
Fix up rev-list option parsing.
Fix up default abbrev in setup_revisions() argument parser.
Common option parsing for "git log --diff" and friends
On Sun, 16 Apr 2006, Junio C Hamano wrote:
>
> In the mid-term, I am hoping we can drop the generate_header()
> callchain _and_ the custom code that formats commit log in-core,
> found in cmd_log_wc().
Ok, this was nastier than expected, just because the dependencies between
the different log-printing stuff were absolutely _everywhere_, but here's
a patch that does exactly that.
The patch is not very easy to read, and the "--patch-with-stat" thing is
still broken (it does not call the "show_log()" thing properly for
merges). That's not a new bug. In the new world order it _should_ do
something like
if (rev->logopt)
show_log(rev, rev->logopt, "---\n");
but it doesn't. I haven't looked at the --with-stat logic, so I left it
alone.
That said, this patch removes more lines than it adds, and in particular,
the "cmd_log_wc()" loop is now a very clean:
while ((commit = get_revision(rev)) != NULL) {
log_tree_commit(rev, commit);
free(commit->buffer);
commit->buffer = NULL;
}
so it doesn't get much prettier than this. All the complexity is entirely
hidden in log-tree.c, and any code that needs to flush the log literally
just needs to do the "if (rev->logopt) show_log(...)" incantation.
I had to make the combined_diff() logic take a "struct rev_info" instead
of just a "struct diff_options", but that part is pretty clean.
This does change "git whatchanged" from using "diff-tree" as the commit
descriptor to "commit", and I changed one of the tests to reflect that new
reality. Otherwise everything still passes, and my other tests look fine
too.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Relying on eye-candy progress bar was fragile to begin with.
Run fetch-pack with -k option, and count the objects that are in
the pack that were transferred from the other end.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When running t3600-rm test under fakeroot (or as root), we
cannot make a file unremovable with "chmod a-w .". Detect this
case early and skip that test.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The speed of the built-in diff generator is nice; but the function names
shown by `diff -p' are /really/ nice. And I hate having to choose. So,
we hack xdiff to find the function names and print them.
xdiff has grown a flag to say whether to dig up the function names. The
builtin_diff function passes this flag unconditionally. I suppose it
could parse GIT_DIFF_OPTS, but it doesn't at the moment. I've also
reintroduced the `function name' into the test suite, from which it was
removed in commit 3ce8f089.
The function names are parsed by a particularly stupid algorithm at the
moment: it just tries to find a line in the `old' file, from before the
start of the hunk, whose first character looks plausible. Still, it's
most definitely a start.
Signed-off-by: Mark Wooding <mdw@distorted.org.uk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This fixes up a couple of minor issues with the real built-in
diff to be more usable:
- Omit ---/+++ header unless we emit diff output;
- Detect and punt binary diff like GNU does;
- Honor GIT_DIFF_OPTS minimally (only -u<number> and
--unified=<number> are currently supported);
- Omit line count of 1 from "@@ -l,k +m,n @@" hunk header
(i.e. when k == 1 or n == 1)
- Adjust testsuite for the lack of -p support.
Signed-off-by: Junio C Hamano <junkio@cox.net>
... to store parts of the path, if possible. This allows us to avoid
writing extended headers in certain cases (long pathes can only be
split at '/' chars).
Also adds a file to the test repo with a 100 chars long directory name.
Even old versions of tar that don't understand POSIX extended headers
should be able to handle this testcase.
Btw.: The longest path in the kernel tree currently has 70 chars.
Together with a 30 chars long prefix this would already cross the
field limit of 100 chars.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The tests hang for me waiting for Emacs with its output directed
somewhere strage, because I hedged my bets and set both EDITOR and
VISUAL to run Emacs.
Signed-off-by: Mark Wooding <mdw@distorted.org.uk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Just I am old fashioned. Source inclusion in bourne shell is
"." (dot), not "source" -- that's csh.
[jc: yes I know bash groks it, but I am old fashioned.]
Signed-off-by: Junio C Hamano <junkio@cox.net>
This rewrites the result check code a bit. The earlier one
using awk was splitting columns at any whitespace, which
confused lines attributed incorrectly to the merge made by the
default author "A U Thor <author@example.com>" with lines
attributed to author "A".
The latest test by Ryan to add the "starting from older commit"
test is also included, with another older commit test.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Sometimes it is convient for a Porcelain to be able to checkout all
unmerged files in all stages so that an external merge tool can be
executed by the Porcelain or the end-user. Using git-unpack-file
on each stage individually incurs a rather high penalty due to the
need to fork for each file version obtained. git-checkout-index -a
--stage=all will now do the same thing, but faster.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* lt/rev-list:
setup_revisions(): handle -n<n> and -<n> internally.
git-log (internal): more options.
git-log (internal): add approxidate.
Rip out merge-order and make "git log <paths>..." work again.
Tie it all together: "git log"
Introduce trivial new pager.c helper infrastructure
git-rev-list libification: rev-list walking
Splitting rev-list into revisions lib, end of beginning.
rev-list split: minimum fixup.
First cut at libifying revlist generation
git-mv needs to be run from the base directory so that
the check if a file is under revision also covers files
outside of a subdirectory. Previously, e.g. in the git repo,
cd Documentation; git-mv ../README .
produced the error
Error: '../README' not under version control
The test is extended for this case; it previously only tested
one direction.
Signed-off-by: Josef Weidendorfer <Josef.Weidendorfer@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Some versions of sed lack the "-i" option.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Well, assuming breaking --merge-order is fine, here's a patch (on top of
the other ones) that makes
git log <filename>
actually work, as far as I can tell.
I didn't add the logic for --before/--after flags, but that should be
pretty trivial, and is independent of this anyway.
Signed-off-by: Junio C Hamano <junkio@cox.net>
New tests are added to the git-rm test case to cover this as well.
Signed-off-by: Carl Worth <cworth@cworth.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds a git-rm command which provides convenience similar to
git-add, (and a bit more since it takes care of the rm as well if
given -f).
Like git-add, git-rm expands the given path names through
git-ls-files. This means it only acts on files listed in the
index. And it does act recursively on directories by default, (no -r
needed as in the case of rm itself). When it recurses, it does not
remove empty directories that are left behind.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* fix:
git-push: Update documentation to describe the no-refspec behavior.
format-patch: pretty-print timestamp correctly.
git-add: Add support for --, documentation, and test.
This adds support to git-add to allow the common -- to separate
command-line options and file names. It adds documentation and a new
git-add test case as well.
[jc: this should apply to 1.2.X maintenance series, so I reworked
git-ls-files --error-unmatch test. ]
Signed-off-by: Junio C Hamano <junkio@cox.net>
Some versions of GNU make do not understand $(call), and have problems to
interpret rules like this:
some_target: CFLAGS += -Dsome=defs
[jc: simplified substitution a bit. ]
Signed-off-by: Johannes E. Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
In some setups (notably server setups) you do not need that dependency.
Gracefully handle the absence of python when NO_PYTHON is defined.
Signed-off-by: Johannes E. Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When git-reset --hard is used and a subdirectory becomes
empty (as it contains no tracked files in the target tree)
the empty subdirectory should be removed. This matches
the behavior of git-checkout-index and git-read-tree -m
which would not have created the subdirectory or would
have deleted it when updating the working directory.
Subdirectories which are not empty will be left behind.
This may happen if the subdirectory still contains object
files from the user's build process (for example).
[jc: simplified the logic a bit, while keeping the test script.]
FreeBSD 4.11 being one example: the built-in echo doesn't have -e,
and the installed /bin/echo does not do "-e" as well.
"printf" works, laking just "\e" and "\xAB'.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Now pack-object is not as chatty when its stderr is not connected
to a terminal, so the test needs to be adjusted for that.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Without these, running tests with an account with empty gecos
field would fail.
We might want to loosen error from "git-var -l" (but not
"git-var GIT_AUTHOR_NAME") later, but that is more or less an
independent issue.
Signed-off-by: Junio C Hamano <junkio@cox.net>
It tried to "restore" GIT_AUTHOR_EMAIL environment variable but
the variable started out as unset, so ended up setting it to an
empty string. This is now caught as an error.
Signed-off-by: Junio C Hamano <junkio@cox.net>
- "git commit" without _any_ parameter keeps the traditional
behaviour. It commits the current index.
We commit the whole index even when this form is run from a
subdirectory.
- "git commit --include paths..." (or "git commit -i paths...")
is equivalent to:
git update-index --remove paths...
git commit
- "git commit paths..." acquires a new semantics. This is an
incompatible change that needs user training, which I am
still a bit reluctant to swallow, but enough people seem to
have complained that it is confusing to them. It
1. refuses to run if $GIT_DIR/MERGE_HEAD exists, and reminds
trained git users that the traditional semantics now needs
-i flag.
2. refuses to run if named paths... are different in HEAD and
the index (ditto about reminding). Added paths are OK.
3. reads HEAD commit into a temporary index file.
4. updates named paths... from the working tree in this
temporary index.
5. does the same updates of the paths... from the working
tree to the real index.
6. makes a commit using the temporary index that has the
current HEAD as the parent, and updates the HEAD with this
new commit.
- "git commit --all" can run from a subdirectory, but it updates
the index with all the modified files and does a whole tree
commit.
- In all cases, when the command decides not to create a new
commit, the index is left as it was before the command is
run. This means that the two "git diff" in the following
sequence:
$ git diff
$ git commit -a
$ git diff
would show the same diff if you abort the commit process by
making the commit log message empty.
This commit also introduces much requested --author option.
$ git commit --author 'A U Thor <author@example.com>'
Signed-off-by: Junio C Hamano <junkio@cox.net>
This test depended on "sleep 1" to be enough to dirty the index
entry for a symlink. Alex noticed that on his Cygwin installation
"sleep 1" was sometimes not enough, and after further discussion with
Christopher Faylor, it was brought up that on FAT filesystem timestamp
granularity is 2 seconds so sleeping 1 second is not enough.
For now this patch takes an easy workaround of sleeping for 3 seconds.
Very strictly speaking, POSIX requires lstat to fill only S_IFMT part
of st_mode and st_size for symlinks, and depending on timestamp might
be considered a bug, but we depend on that anyway, so it is better to
test that.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This changes the character used to mark the commits that is on the
branch from '+' to '*' for the current branch, to make it stand out.
Also we show '-' for merge commits.
When you have a handful branches with relatively long diversion, it
is easier to see which one is the current branch this way.
Signed-off-by: Junio C Hamano <junkio@cox.net>
In a repository with mainto/1.0 (to keep maintaining the 1.0.X
series) and fixo/1.0 (to keep fixes that apply to both 1.0.X
series and upwards) branches, "git-name-rev mainto/1.0" answered
just "1.0" making things ambiguous. Show refnames unambiguously
like show-branch does.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This test exercises the standard feature that makes rebase useful.
Signed-off-by: Yann Dirson <ydirson@altern.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This test checks that git-cherry finds the expected number of patches
in two simple cases, and then tests the new limit arguments.
[jc: collapsed two patches into one and added sleep to make sure
the two commits would get different timestamps]
Signed-off-by: Yann Dirson <ydirson@altern.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
and was successfully entered. Otherwise git-init-db will create it directly
in the working directory (t/) which can be dangerous.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Move git-rev-list --merge-order usage check for 'OpenSSL not linked' after
test 1; we cannot trigger this unless we try to actually use --merge-order
by giving some ref, and we do not have any ref until we run the first test
to create commits.
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
These tests seem to mean checking the output with expected
result, but was not doing its handrolled test helper function.
Also fix the guard to workaround wc output that have whitespace
padding, which was broken but not exposed because the test was
not testing it ;-).
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch converts a stat() to an lstat() call, thereby fixing the case
when the date of a symlink was not the same as the one recorded in the
index. The included test case demonstrates this.
This is for the case that the symlink points to a non-existing file. If
the file exists, worse things than just an error message happen.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Johannes found that the test has 1/256 chance of falsely
producing an uncorrupted idx file, causing the check to detect
corruption fail. Now we have 1/2^160 chance of false failure
;-).
Signed-off-by: Junio C Hamano <junkio@cox.net>
Although pack-check.c had routine to verify the checksum for the
pack index file itself, the core did not check it before using
it.
This is stolen from the patch to tighten packname requirements.
Signed-off-by: Junio C Hamano <junkio@cox.net>
(cherry picked from 797bd6f490 commit)
Although pack-check.c had routine to verify the checksum for the
pack index file itself, the core did not check it before using
it.
This is stolen from the patch to tighten packname requirements.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This changes the way the case two branches rename the same path
to different paths is handled. Earlier, the code removed the
original path and added both destinations to the index at
stage0. This commit changes it to leave the original path at
stage1, and two destination paths at stage2 and stage3,
respectively.
[jc: I am not really sure if this makes much difference in the
real life merge situations. What should happen when our branch
renames A to B and M to N, while their branch renames A to M?
That is, M remains in our tree as is.]
Signed-off-by: Junio C Hamano <junkio@cox.net>
The previous round caught the most trivial case well, but broke
down once index file is updated again. Smudge problematic
entries (they should be very few if any under normal interactive
workflow) before writing a new index file out.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This fixes the longstanding "Racy GIT" problem, which was pretty
much there from the beginning of time, but was first
demonstrated by Pasky in this message on October 24, 2005:
http://marc.theaimsgroup.com/?l=git&m=113014629716878
If you run the following sequence of commands:
echo frotz >infocom
git update-index --add infocom
echo xyzzy >infocom
so that the second update to file "infocom" does not change
st_mtime, what is recorded as the stat information for the cache
entry "infocom" exactly matches what is on the filesystem
(owner, group, inum, mtime, ctime, mode, length). After this
sequence, we incorrectly think "infocom" file still has string
"frotz" in it, and get really confused. E.g. git-diff-files
would say there is no change, git-update-index --refresh would
not even look at the filesystem to correct the situation.
Some ways of working around this issue were already suggested by
Linus in the same thread on the same day, including waiting
until the next second before returning from update-index if a
cache entry written out has the current timestamp, but that
means we can make at most one commit per second, and given that
the e-mail patch workflow used by Linus needs to process at
least 5 commits per second, it is not an acceptable solution.
Linus notes that git-apply is primarily used to update the index
while processing e-mailed patches, which is true, and
git-apply's up-to-date check is fooled by the same problem but
luckily in the other direction, so it is not really a big issue,
but still it is disturbing.
The function ce_match_stat() is called to bypass the comparison
against filesystem data when the stat data recorded in the cache
entry matches what stat() returns from the filesystem. This
patch tackles the problem by changing it to actually go to the
filesystem data for cache entries that have the same mtime as
the index file itself. This works as long as the index file and
working tree files are on the filesystems that share the same
monotonic clock. Files on network mounted filesystems sometimes
get skewed timestamps compared to "date" output, but as long as
working tree files' timestamps are skewed the same way as the
index file's, this approach still works. The only problematic
files are the ones that have the same timestamp as the index
file's, because two file updates that sandwitch the index file
update must happen within the same second to trigger the
problem.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When .git/refs/heads/frotz and .git/refs/tags/frotz existed, and
the object name stored in .git/refs/heads/frotz were corrupt, we
ended up picking tags/frotz without complaining. Worse yet, if
the corrupt .git/refs/heads/frotz was more than 40 bytes and
began with hexadecimal characters, it silently overwritten the
initial part of the returned result.
This commit adds a couple of tests to demonstrate these cases,
with a fix.
Signed-off-by: Junio C Hamano <junkio@cox.net>
If GIT_AUTHOR_EMAIL is of a certain form, `git rebase master' will blow
away the author name and email when fast-forward merging commits. I
have not tracked it down, but here is a testcase that demonstrates the
behavior.
Signed-off-by: Amos Waterland <apw@us.ibm.com>
Acked-by: Michal Ostrowski <mostrows@watson.ibm.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
In case some refs couldn't be pushed out due to an error (mostly the
not-a-proper-subset error), make git-send-pack exit with non-zero status
after the push is over (that is, it still tries to push out the rest
of the refs).
[jc: I adjusted a test for this change.]
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This test kicks in only if you built test-delta executable, and
makes sure that the basic delta routine is working properly even
on empty files.
This commit is to make sure we have a test to catch the
breakage. The delitifier code is still broken, which will be
fixed with the next commit.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds a couple of tests to cover the following renaming
merge cases:
- one side renames and the other side does not, with and without
content conflicts.
- both side rename to the same path, with and without content
conflicts.
The test setup also prepares a case in which both side rename to
different destination, but currently the code collapses these
destination paths and removes the original path, which may be
wrong. The outcome of this case is not checked by the tests in
this round.
Signed-off-by: Junio C Hamano <junkio@cox.net>
People seem to be getting test failure from t6021 not becuase
git is faulty but because they forgot to install "merge". Check
this and other trivial pilot errors in the first test.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is just a belts-and-suspenders check, but makes sure we
have both "git" and "git-init-db" built, executable, and
checking.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is to catch an error where tests are run without first
building what are being tested. Relying on prefixing $PATH with
the build directory and expect that the PATH mechanism would
find what we just built would silently run an already installed
binaries from the PATH.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Not everybody can rely on /bin/sh to be sane, and we support
SHELL_PATH for that. Use it.
mktemp(1) is not used anywhere else in the core git. Do not
introduce dependency on it.
Not everybody's "which" gives a sane return value. For example,
on Solaris 'which XXX' says "no XXX in /usr/bin /bin ..." and
exits with zero status. The lesson here is to never use 'which'
in your scripts.
Signed-off-by: Junio C Hamano <junkio@twinsun.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The test is considered OK if it exits with code $1
Signed-off-by: Fredrik Kuivinen <freku045@student.liu.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano, Sat, Nov 26, 2005 03:45:52 +0100:
> I haven't seriously used git-mv myself, so
> somebody needs to test it, and if it actually works and Ack on
> it, please.
It actually works in subdirs.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The diff for this commit is a good illustration of what changed
in ls-tree behaviour.
- With -r, tree nodes themselves are not shown anymore, but
blobs in subtrees are shown.
- The order of paths parameters do not matter, since they are
not like arguments to /bin/ls, but are filter patterns.
- When filter patterns overlap, unintuitive things happen.
Signed-off-by: Junio C Hamano <junkio@cox.net>
A .git/config like follows becomes valid with this patch:
[remote.junio]
url = git://git.kernel.org/pub/scm/git/git.git
pull = master:junio todo:todo +pu:pu
[remote.ibook]
url = ibook:git/
pull = master:ibook
push = master:quetzal
(This patch only does the ini file thing, git-fetch and friends still
ignore these values).
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Extend the regex syntax of value_regex so that prepending an exclamation
mark means non-match:
[core]
quetzal = "Dodo" for Brainf*ck
quetzal = "T. Rex" for Malbolge
quetzal = "cat"
You can match the third line with
git-config-set --get quetzal '! for '
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
... namely
--replace-all, to replace any amount of matching lines, not just 0 or 1,
--get, to get the value of one key,
--get-all, the multivar version of --get, and
--unset-all, which deletes all matching lines from .git/config
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
A new option, --allow-binary-replacement, is introduced.
When you feed a diff that records full SHA1 name of pre- and
post-image blob on its index line to git-apply with this option,
the post-image blob replaces the path if what you have in the
working tree matches the pre-image _and_ post-image blob is
already available in the object directory.
Later we _might_ want to enhance the diff output to also include
the full binary data of the post-image, to make this more
useful, but this is good enough for local rebasing application.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Recently we fixed 'git-apply --stat' not to barf on a binary
differences. But it accidentally broke the error detection when
we actually attempt to apply them.
This commit fixes the problem and adds test cases.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The recently we updated rev-list --topo-order to show the heads
in date order, but we had a test that expected to see the old
behaviour.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Make git-update-ref create references with slashes in them. git-branch
and git-checkout already support such reference names.
git-branch can use git-update-ref to create the references in a more
formal manner now.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Because a batch-oriented script creates many commits within a second
on a fast machine, show-branch output of the test results are unstable
without topo-order.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Although it was shown that the "full contamination" was not really full
during the list discussion, the series improves things without incurring
extra parsing cost, and here is a test to check that.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Allow failed tests to be ignored using make's "-i". The patch also
disables parallel make in t/. This doesn't make the testing any
different as before: the tests were run sequentially before.
It also allows to run more tests, ignoring the ones usually failing
just to figure out if something else broke. (Or to ignore plainly
uninteresting situations because of the testing being done on say...
cygwin ;)
Signed-off-by: Junio C Hamano <junkio@cox.net>
We checked the result of patch application for full permission bits,
when the only thing we cared about was to make sure the executable
bit was correctly set.
Noticed by Peter Baumann.
Signed-off-by: Junio C Hamano <junkio@cox.net>
For everyone cursed by dos/windows line endings (aka CRLF):
The code reading the .gitignore files (excludes and excludes per
directory) leaves \r in the patterns, which causes fnmatch to fail for
no obvious reason. Just remove a "\r" preceding a "\n"
unconditionally.
Signed-off-by: Junio C Hamano <junkio@cox.net>
On Linux, "mktemp tmp-XXXX" will not work. Also, redirect stderr on which,
so it does not complain too loudly. After all, this test should only be
executed when old binaries are available.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The next patches will extend the pack protocol. This test assures that this
extension is compatible to earlier versions of git-fetch-pack/git-upload-pack.
All you need to do to take advantage of this test, is to install older
known-to-be-working binaries in the path as "old-git-fetch-pack" and
"old-git-upload-pack".
Note that the warning when testing with old-git-fetch-pack is to be
expected (it just says that the old version was not taking advantage
of all the information which the server sent).
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This test provides a minimal example of what went wrong with the old
git-fetch-pack (and now works beautifully).
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch allows the testsuite to run properly when the full path to
the git sources contains spaces or other symbols that need to be quoted.
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This removes the unoptimization. The previous round does not mind
missing fan-out directories, but still makes sure they exist, lest
older versions choke on a repository created/packed by it.
This round does not play that nicely anymore -- empty fan-out
directories are not created by init-db, and will stay removed by
prune-packed. The prune command also removes empty fan-out directories.
Signed-off-by: Junio C Hamano <junkio@cox.net>
On FAT/NTFS, filenames cannot contain tabs. So t3300-funny-names would
reliably fail already when trying to create such files.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Individual tests for hooks would want to have their own tests when
written. Also we should not pick up from random templates the user
happens to have.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Lacking reliable symlinks, the instructions in the tutorial did not work
in a cygwin setup. Also, a few outputs were not correct.
This patch fixes these, and adds a test case which follows the
instructions of the tutorial (except git-clone, -fetch and -push, which I
have not done yet).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-index-pack builds a pack index file for an existing packed
archive. With this utility a packed archive which was transferred
without the corresponding pack index can be added to objects/pack/
without repacking.
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Since cygwin does not install cpio by default, t5400 results in a very
cryptic failure. So, test for cpio explicitely.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This makes it possible to have a "sparse" git object subdirectory
structure, something that has become much more attractive now that people
use pack-files all the time.
As a result of pack-files, a git object directory doesn't necessarily have
any individual objects lying around, and in that case it's just wasting
space to keep the empty first-level object directories around: on many
filesystems the 256 empty directories will be aboue 1MB of diskspace.
Even more importantly, after you re-pack a project that _used_ to be
unpacked, you could be left with huge directories that no longer contain
anything, but that waste space and take time to look through.
With this change, "git prune-packed" can just do an rmdir() on the
directories, and they'll get removed if empty, and re-created on demand.
This patch also tries to fix up "write_sha1_from_fd()" to use the new
common infrastructure for creating the object files, closing a hole where
we might otherwise leave half-written objects in the object database.
[jc: I unoptimized the part that really removes the fan-out directories
to ease transition. init-db still wastes 1MB of diskspace to hold 256
empty fan-outs, and prune-packed rmdir()'s the grown but empty directories,
but runs mkdir() immediately after that -- reducing the saving from 150KB
to 146KB. These parts will be re-introduced when everybody has the
on-demand capability.]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch fixes a bug in git-ls-tree in which the wrong filenames are
listed if the exact same file and directory contents are present in
another location in the tree.
Added a new series of test cases for directory and filename handling.
Signed-off-by: Robert Fitzsimons <robfitz@273k.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds more cruft to diff --git header to record the blob SHA1 and
the mode the patch/diff is intended to be applied against, to help the
receiving end fall back on a three-way merge. The new header looks
like this:
diff --git a/apply.c b/apply.c
index 7be5041..8366082 100644
--- a/apply.c
+++ b/apply.c
@@ -14,6 +14,7 @@
// files that are being modified, but doesn't apply the patch
// --stat does just a diffstat, and doesn't actually apply
+// --show-index-info shows the old and new index info for...
...
Upon receiving such a patch, if the patch did not apply cleanly to the
target tree, the recipient can try to find the matching old objects in
her object database and create a temporary tree, apply the patch to
that temporary tree, and attempt a 3-way merge between the patched
temporary tree and the target tree using the original temporary tree
as the common ancestor.
The patch lifts the code to compute the hash for an on-filesystem
object from update-index.c and makes it available to the diff output
routine.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Useful if you have a file whose name starts with a dash.
Signed-off-by: Fredrik Kuivinen <freku045@student.liu.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
- The location of openssl development files got customizable.
- The location of iconv development files got customizable.
- Pass $TAR down to t5000 test so that the user can override with
'gmake TAR=gtar'.
- Solaris 'bc' does not seem to grok "define abs()". There is no
reason to use bc there -- expr would do.
Signed-off-by: Junio C Hamano <junio@twinsun.com>
This adds the counterpart of git-update-ref that lets you read
and create "symbolic refs". By default it uses a symbolic link
to represent ".git/HEAD -> refs/heads/master", but it can be compiled
to use the textfile symbolic ref.
The places that did 'readlink .git/HEAD' and 'ln -s refs/heads/blah
.git/HEAD' have been converted to use new git-symbolic-ref command, so
that they can deal with either implementation.
Signed-off-by: Junio C Hamano <junio@twinsun.com>
It still talked about "the proposed alternative semantics" but we have
used those alternative semantics for quite some time. Update them to
avoid confusion.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The textual diff generation with built-in '-p' in diff-* brothers has
proven to be useful enough that git-diff-helper outlived its usefulness.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add -m/--modified to show files that have been modified wrt. the index.
[jc: The original came from Brian Gerst on Sep 1st but it only checked
if the paths were cache dirty without actually checking the files were
modified. I also added the usage string and a new test.]
Signed-off-by: Junio C Hamano <junkio@cox.net>
I do not know why it was spelled git-rev-tree when I meant to say
git-read-tree, but the typo was left since day one.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This will help us detect if real-world example merges have multiple
merge-base candidates and one of them matches one head while another
matches the other head.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Adds support for multiple ancestors, removes --emu23, much simplification.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We have deprecated the old environment variable names for quite a
while and now it's time to remove them. Gone are:
SHA1_FILE_DIRECTORIES AUTHOR_DATE AUTHOR_EMAIL AUTHOR_NAME
COMMIT_AUTHOR_EMAIL COMMIT_AUTHOR_NAME SHA1_FILE_DIRECTORY
Signed-off-by: Junio C Hamano <junkio@cox.net>
Earlier we renamed git-foo.sh to git-foo while installing, which
was mostly done by inertia than anything else. This however
made writing tests to use scripts harder.
This patch builds the scripts the same way as we build binaries
from their sources. As a side effect, you can now specify
non-standard paths you have your Perl binary is in when running
the make.
Signed-off-by: Junio C Hamano <junkio@cox.net>
If you run `git branch --help', you will unexpectedly have created a new
branch named "--help". This simple patch adds logic and a usage
statement to catch this and similar problems, and adds a testcase for it.
Signed-off-by: Amos Waterland <apw@rossby.metr.ou.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
As promised, this is the "big tool rename" patch. The primary differences
since 0.99.6 are:
(1) git-*-script are no more. The commands installed do not
have any such suffix so users do not have to remember if
something is implemented as a shell script or not.
(2) Many command names with 'cache' in them are renamed with
'index' if that is what they mean.
There are backward compatibility symblic links so that you and
Porcelains can keep using the old names, but the backward
compatibility support is expected to be removed in the near
future.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The new test pattern is taken from HPA's klibc and klibc-kbuild trees,
which has many interesting renames (the commits
001eef5a19219e5b0601068a3d13874b88c0653e and
0037d1bc0deaf7daec3778496656cb04b4e4b9d0). The test pattern exposes
problems in the apply.c changes currently in the proposed updates
branch.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Added a new test case for the scanning forwards and backwards for the
correct location to apply a patch fragment.
Signed-off-by: Robert Fitzsimons <robfitz@273k.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Added a test case for patches with multiple fragments.
Signed-off-by: Robert Fitzsimons <robfitz@273k.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Without this patch, git-apply does not retain the mode when renaming or
copying files.
[jc: Good catch, Johannes. I added a test case to demonstrate the
breackage in the original.]
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
It seems that the localtime() libc routine doesn't care for finding a TZ
that's empty. It's ok with TZ not being set. Setting the TZ to GMT allowed
these tests to pass.
$ uname -v
Darwin Kernel Version 7.9.0: Wed Mar 30 20:11:17 PST 2005; root:xnu/xnu-517.12.7.obj~1/RELEASE_PPC
Signed-off-by: Brad Roberts <braddr@puremagic.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
"return" from a test would leave the exit trap set, which could cause a
spurious error message if it's the last test in the script or
--immediate is used.
The easiest solution would be to have a global trap that is set when
test-lib.sh is sourced and unset either by test_done(), error() or by
test_failure_() with --immediate.
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
I have noticed that "make test" fails without any explanations when the
"merge" utility is missing. I don't think tests should be silent in
case of failure.
It turned out that the particular test was using "exit" to interrupt the
test in case of an error. This caused the whole test script to exit.
No further tests would be run even if "--immediate" wasn't specified.
No error message was printed.
This patch does following:
All instances of "exit", "exit 1" and "(exit 1)" in tests have been
replaced with "return 1". In fact, "(exit 1)" had no effect.
File descriptor 5 is duplicated from file descriptor 1. This is needed
to print important error messages from tests.
New function test_run_() has been introduced. Any "return" in the test
would merely cause that function to return without skipping calls to
test_failure_() and test_ok_(). The new function also traps "exit" and
treats it like a fatal error (in case somebody reintroduces "exit" in
the tests).
test_expect_failure() and test_expect_success() check both the result of
eval and the return value of test_run_(). If the later is not 0, it's
always a failure because it indicates the the test didn't complete.
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
"t5400-send-pack.sh --verbose" stops waiting for user input. It happens
because "git log" uses less for output now. To prevent this, PAGER
should be set to cat.
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
All test scripts should end with test_done, which reports the test
results. In the future, it could be used for other purposes, e.g. to
distinguish graceful end from "exit" in a test. This patch fixes
scripts that don't call test_done.
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-rev-parse HEAD^1 would fail, because of an off-by-one bug (but HEAD^
would yield the expected result). Also, when the parent does not exist, do
not silently return an incorrect SHA1. Of course, this no longer applies
to git-rev-parse alone, but every user of get_sha1().
While at it, add a test.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When built with NO_OPENSSL, rev-list --merge-order does not
work, causing t6001 test to fail. Detect that and skip this
test to allow continuing to the rest of the tests.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Test t6002 unnecessarily fails when bc is a bit older than average.
Signed-off-by: Johannes.Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The check that the source is ahead of the destination incorrectly expects
pop_most_recent_commit() to gracefully handle an empty list.
Fix by just checking the list itself, rather than the return value of the
pop function.
[jc: I did the test script that demonstrated the problem]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We use 'A' for added files instead of 'N' to make the it
visually easier to distinguish from 'M' now.
While we are at it, make the test scripts executable. Yes, I
know it does not matter because t/Makefile runs them explicitly
with "sh tXXXX-blah.sh", but being consistent is always better.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add --exclude-per-directory=<name> option that specifies a file
to contain exclude patterns local to that directory and its
subdirectories. Update the exclusion logic to be able to say
"include files that match this more specific pattern, even
though later exclude patterns may match them". Also enhances
that a pattern can contain '/' in which case fnmatch is called
with FNM_PATHNAME flag to match the entire path.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The output from a failure case had the test description message
and the first line of the actual test script concatenated on the
same line, which was ugly. Correct the output routine a bit to
make it more readable.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The parsing code had a bug that failed to recognize an
incomplete line at the end of a fragment, and the fragment
application code had a comparison bug to recognize such. Fix
them to handle incomplete lines correctly.
Add a test script for patches with various combinations of
complete and incomplete lines to make sure the fix works.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The Makefile in the test suite directory considers any file
matching t[0-9][0-9][0-9][0-9]-*.sh as the top-level test script
to be executed. Unfortunately this was not documented, and the
common test library, t6000-lib.sh was named to match that
pattern. This caused t6000-lib.sh to be called from Makefile as
the top-level program, causing it to leave t/sed.script file
behind. Rename it to t6000lib.sh to prevent this, and document
the naming convention a bit more clearly.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
When sed uses \n rather than ; as a separator (for BSD sed(1) compat),
it is cleaner to use a file directly, rather than an environment
variable containing \n characters.
This change changes t/t6000 write to sed.script directly and changes
the other tests to remove knowledge of sed.script.
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This test case demonstrates a problem with --merge-order.
A
|
B
|\
C D
|/
E
|
F
git-rev-list --merge-order A B doesn't produce the expected output of
A
B
D
C
E
F
The problem is fixed by a subsequent patch.
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This trivial patch removes the semicolon as the sed seperator in the t/t6000-lib.sh test script
and replaces it with white space. This makes BSD sed(1) much happier.
Signed-off-by: Mark Allen <mrallen1@yahoo.com>
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch introduces some unit tests for the git-rev-list --bisect functionality.
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Functions that are useful to other t6xxx testcases are moved into t6000-lib.sh
To use these functions in a test case, use a test-case pre-amble like:
. ./test-lib.sh
. ../t6000-lib.sh # t6xxx specific functions
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch fixes up the t/t5300 unit tests which were broken by the changes in:
Make the name of a pack-file depend on the objects packed there-in.
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch removes an unnecessary sort from the t6001 testcase.
Sorts were previously necessary when testing non --merge-order cases
because the output order wasn't entirely deterministic unless commit
date was fixed.
However, commit dates are now fixed, so the need for a sort has
disappeared. So the sort has been removed.
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This fix fixes a t/t6001 test case break that was hidden by a bug in the
test case infrastructure.
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Junio discovered a problem where an actual test case break was hidden
because pipelines are not handled properly by the test infrastructure in
t6001.
This patch fixes the broken infrastructure (and demonstrates the break
explicitly).
A subsequent patch in this series will fix the test case so that it
doesn't fail.
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch makes --merge-order produce the same list as git-rev-list
without --merge-order specified.
In particular, if the graph looks like this:
A
| B
|/
C
|
D
The both git-rev-list B ^A and git-rev-list --merge-order will produce B.
The unit tests have been changed to reflect the fact that the prune
points are now formally part of the start list that is used to perform
the --merge-order sort.
That is: git-rev-list --merge-order A ^D used to produce
= A
| C
It now produces:
^ A
| C
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Added a test case that shows that --merge-order doesn't produce the
correct result in the following case.
A
|
| B
|/
C
|
D
git-rev-list --merge-order A ^B should produce just A. Instead
it produces BCD.
A subsequent patch will fix this defect.
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
It now always read from standard input and rejects non-flag
arguments.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Given a list of <pack>.idx files, this command validates the
index file and the corresponding .pack file for consistency.
This patch also uses the same validation mechanism in fsck-cache
when the --full flag is used.
During normal operation, sha1_file.c verifies that a given .idx
file matches the .pack file by comparing the SHA1 checksum
stored in .idx file and .pack file as a minimum sanity check.
We may further want to check the pack signature and version when
we map the pack, but that would be a separate patch.
Earlier, errors to map a pack file was not flagged fatal but led
to a random fatal error later. This version explicitly die()s
when such an error is detected.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This replaces sha1sum(1) with sum(1) in t/t1002. GNU sum(1) runs in
"BSD compatibility" mode by default, and not all systems have GNU
coreutils. On any system without GNU coreutils (or sha1sum) t1002 will
fail. This patch should make t1002 complete successfully everywhere
that sum(1) runs.
I've tested this on Darwin and Linux; it works on both platforms.
Signed-off-by: Mark Allen <mrallen1@yahoo.com>
Acked-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
GIT_OBJECT_DIRECTORY and GIT_ALTERNATE_OBJECT_DIRECTORIES can
have the "pack" subdirectory that houses "packed GIT" files
produced by git-pack-objects (e.g. .git/objects/pack/foo.pack
and .git/objects/pack/foo.idx; always store them as pairs). The
following functions in sha1_file.c can then read object contents
from such packed file:
- sha1_object_info()
- has_sha1_file()
- read_sha1_file()
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Packed delta files created by git-pack-objects seems to be the
way to go, and existing "delta" object handling code has exposed
the object representation details to too many places. Remove it
while we refactor code to come up with a proper interface in
sha1_file.c.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This finishes the initial round of git-pack-object /
git-unpack-object pair. They are now good enough to be used as
a transport medium:
- Fix delta direction in pack-objects; the original was
computing delta to create the base object from the object to
be squashed, which was quite unfriendly for unpacker ;-).
- Add a script to test the very basics.
- Implement unpacker for both regular and deltified objects.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
An earlier change to optimize directory-file conflict check
broke what "read-tree --emu23" expects. This is fixed by this
commit.
(1) Introduces an explicit flag to tell add_cache_entry() not to
check for conflicts and use it when reading an existing tree
into an empty stage --- by definition this case can never
introduce such conflicts.
(2) Makes read-cache.c:has_file_name() and read-cache.c:has_dir_name()
aware of the cache stages, and flag conflict only with paths
in the same stage.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This adds more tests for --emu23. One is to show how it can
carry forward more local changes than the straightforward
two-way fast forward, and another is to show the recent
overeager optimization of directory/file conflict check broke
things, which will be fixed in the next commit.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
git-rev-list --merge-order is omitting one of the roots when
displaying a merge containing two distinct roots.
A subsequent patch will fix the problem.
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This adds tests (which also serves demonstration) for the --stat
and --summary flags to the git-apply command.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
1. --merge-order doesn't deal properly with a specified head that has no parent
* FAIL 11: head has no parent
2. --merge-order doesn't deal properly with arguments of the form
head ^head
* FAIL 30: head ^head --merge-order git-rev-list --merge-order
--show-breaks a3 ^a3
3. if one of the specified heads is reachable from the other, the
head gets printed twice and this causes problems for upcoming
versions of gitk. This is true for both --merge-order and non
--merge-order style of invocations.
* FAIL 24: one specified head reachable from another a4, c3, --merge-order
* FAIL 26: one specified head reachable from another a4, c3, no --merge-order
* FAIL 27: one specified head reachable from another c3, a4, no --merge-order
4. --merge-order aborts with commits that list the same parent twice...it should handle it more gracefully.
* no longer unit testable
5. broken interaction between --merge-order and --max-age
previously posted as:
"[PATCH 1/2] Test case that demonstrates problem with --merge-order, --max-age interaction"
* FAIL 23: --max-age=c3, --merge-order
Later patches in this patch set fix these problems.
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Patch for a completely rewritten file detected by the -B flag
was shown as a pair of creation followed by deletion in earlier
versions. This was an misguided attempt to make reviewing such
a complete rewrite easier, and unnecessarily ended up confusing
git-apply. Instead, show the entire contents of old version
prefixed with '-', followed by the entire contents of new
version prefixed with '+'. This gives the same easy-to-review
for human consumer while keeping it a single, regular
modification patch for machine consumption, something that even
GNU patch can grok.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Like diff-tree, this patch makes -C option for diff-* brothers
to use only pre-image of modified files as rename/copy detection
by default. Give --find-copies-harder to use unmodified files
to find copies from as well.
This also fixes "diff-files -C" problem earlier noticed by
Linus. It was feeding the null sha1 even when the file in the
work tree was known to match what is in the index file. This
resulted in diff-files showing everything in the project.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Unset TZ to force GMT in test #4 and add a set of parens around
the length function in the awk script.
Signed-off-by: Mark Allen <mrallen1@yahoo.com>
Acked-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch teaches read-tree 3-way merge that, when only "the
other tree" changed a path, and if the index file already has
the same change, we are not in a situation that would clobber
the index and the work tree, and lets the merge succeed; this is
case #14ALT in t1000 test. It does not change the result of the
merge, but prevents it from failing when it does not have to.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This adds #3ALT rule (and #2ALT rule for symmetry) to the
read-tree 3-way merge logic that collapses paths that are added
only in one branch and not in the other internally.
This makes --emu23 to succeed in the last remaining case where
the pure 2-way merge succeeded and earlier one failed. Running
diff between t1001 and t1005 test scripts shows that the only
difference between the two is that --emu23 can leave the states
into separate stages so that the user can use usual 3-way merge
resolution techniques to carry forward the local changes when
pure 2-way merge would have refused to run.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This fixes too strong index requirement 3-way merge enforces in
one case: the same file is added in both branches.
In this case, the original code insisted that if the index file
has that path, it must match our branch and be up-to-date.
However in this particular case, it only has to match it, and
can be dirty. We just need to make sure that we keep the
work-tree copy instead of checking out the merge result.
The resolution of such a path, however, cannot be left to
outside script, because we will not keep the original stage0
entries for unmerged paths when read-tree finishes, and at that
point, the knowledge of "if we resolve it to match the new file
added in both branches, the merge succeeds and the work tree
would not lose information, but we should _not_ update the work
tree from the resulting index file" is lost. For this reason,
the now code needs to resolve this case (#5ALT) internally.
This affects some existing tests in the test suite, but all in
positive ways. In t1000 (3-way test), this #5ALT case now gets
one stage0 entry, instead of an identical stage2 and stage3
entry pair, for such a path, and one test that checked for merge
failure (because the test assumed the "stricter-than-necessary"
behaviour) does not have to fail anymore. In t1005 (emu23
test), two tests that involves a case where the work tree
already had a change introduced in the upstream (aka "merged
head"), the merge succeeds instead of failing.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This new flag causes two-way fast forward to internally use the
three-way merge mechanism. This behaviour is intended to offer
a better fast forward semantics when used in a dirty work tree.
The new test t1005 is parallel to the existing t1001 "pure
2-way" tests, but some parts that are commented out would fail.
These failures are due to three-way merge enforcing too strict
index requirements for cases that could succeed. This problem
will be addressed by later patches.
Without even changing three-way mechanism, the --emu23 two-way
fast forward already gives the user an easier-to-handle merge
result when a file that "merged head" updates has local
modifications. This is demonstrated as "case 16" test in t1005.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This is in preparation for "2-way fast-forward emulated with
3-way mechanism" series. It does not change what the tests for
pure 2-way do. It only changes how it tests things, to make
reviewing of differences of the two tests easier in later steps.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This adds a set of tests to make sure that requirements on
existing cache entries are checked when a read-tree -m 3-way
merge is run with an already populated index file.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This updates t1000 (basic 3-way merge test) to check the merge
results for both successful cases (earlier one checked the
result for only one of them). Also fixes typos in t1002 that
broke '&&' chain, potentially missing a test failure before the
chain got broken.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch fixes three bugs in --merge-order support
* mark_ancestors_uninteresting was unnecessarily exponential which
caused a problem when a commit with no parents was merged near the
head of something like the linux kernel
* removed a spurious statement from find_base which wasn't
apparently causing problems now, but wasn't correct either.
* removed an unnecessarily strict check from find_base_for_list
that causes a problem if git-rev-list commit ^parent-of-commit
is specified.
* added some unit tests which were accidentally omitted from
original merge-order patch
The fix to mark_ancestors_uninteresting isn't an optimal fix - a full
graph scan will still be performed in this case even though it is
not strictly required. However, a full graph scan is linear
and still no worse than git-rev-list HEAD which runs in less than 2
seconds on a warm cache.
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This implements the "never lose the current cache information or
the work tree state, but favor a successful merge over merge
failure" principle in the fast-forward two-tree merge operation.
It comes with a set of tests to cover all the cases described in
the case matrix found in the new documentation.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The updated git-tread-tree -m is more strict in that it wants to
have the original cache up to date. The initial part of t1000
(merge tests from hell) fails due to it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Clearly even Junio felt git "rename" header lines should say "from/to"
instead of "old/new", since he wrote the documentation that way.
This way it also matches "copy".
git-apply will accept both versions, at least for a while.
This addresses a concern raised by Jason McMullan in the mailing
list discussion. After retrieving and storing a potentially
deltified object, pull logic tries to check and fulfil its delta
dependency. When the pull procedure is killed at this point,
however, there was no easy way to recover by re-running pull,
since next run would have found that we already have that
deltified object and happily reported success, without really
checking its delta dependency is satisfied.
This patch introduces --recover option to git-*-pull family
which causes them to re-validate dependency of deltified objects
we are fetching. A new test t5100-delta-pull.sh covers such a
failure mode.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
git-tar-tree: remove tests of long path handling out of t5000-tar-tree.sh
and make test script cope with tar programs displaying file modification
date as hh:mm (newer variants show it as hh:mm:ss).
This makes the test cover only basic functionality that is expected to
be handled even by older tar programs. Tests for long filenames (which
require pax extended headers) can be added separately.
I ran this test successfully with GNU tar 1.13, 1.14 and 1.15.1.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This fixes the problem with ls-tree which failed to show
"drivers/char" directory when the user asked for "drivers/char/"
from the command line. At the same time, if "drivers/char" were
a non directory, "drivers/char/" would not show it. This is
consistent with the way diffcore-pathspec has been recently
fixed.
This adds back the diffcore-pathspec test,dropped when my
earlier diffcore-pathspec fix was rejected.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
There were duplicate script pieces to help comparing diff
output, which this patch consolidates into the t/diff-lib.sh
library.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
A new diffcore transformation, diffcore-break.c, is introduced.
When the -B flag is given, a patch that represents a complete
rewrite is broken into a deletion followed by a creation. This
makes it easier to review such a complete rewrite patch.
The -B flag takes the same syntax as the -M and -C flags to
specify the minimum amount of non-source material the resulting
file needs to have to be considered a complete rewrite, and
defaults to 99% if not specified.
As the new test t4008-diff-break-rewrite.sh demonstrates, if a
file is a complete rewrite, it is broken into a delete/create
pair, which can further be subjected to the usual rename
detection if -M or -C is used. For example, if file0 gets
completely rewritten to make it as if it were rather based on
file1 which itself disappeared, the following happens:
The original change looks like this:
file0 --> file0' (quite different from file0)
file1 --> /dev/null
After diffcore-break runs, it would become this:
file0 --> /dev/null
/dev/null --> file0'
file1 --> /dev/null
Then diffcore-rename matches them up:
file1 --> file0'
The internal score values are finer grained now. Earlier
maximum of 10000 has been raised to 60000; there is no user
visible changes but there is no reason to waste available bits.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The score number that follow R/C status were parsed but the
parse pointer was not updated, causing the entire line to become
unrecognized. This patch fixes this problem.
There was a test missing to catch this breakage, which this
commit adds as t4009-diff-rename-4.sh. The diff-raw tests used
in related t4005-diff-rename-2.sh (the same test without -z) and
t4007-rename-3.sh were stricter than necessarily, despite that
the comment for the tests said otherwise. This patch also
corrects them.
The documentation is updated to say that the status can
optionally be followed by a number called "score"; it does not
have to stay similarity index forever and there is no reason to
limit it only to C and R.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This is a complete rewrite of ls-tree to make it behave more
like what "/bin/ls -a" does in the current working directory.
Namely, the changes are:
- Unlike the old ls-tree behaviour that used paths arguments to
restrict output (not that it worked as intended---as pointed
out in the mailing list discussion, it was quite incoherent),
this rewrite uses paths arguments to specify what to show.
- Without arguments, it implicitly uses the root level as its
sole argument ("/bin/ls -a" behaves as if "." is given
without argument).
- Without -r (recursive) flag, it shows the named blob (either
file or symlink), or the named tree and its immediate
children.
- With -r flag, it shows the named path, and recursively
descends into it if it is a tree.
- With -d flag, it shows the named path and does not show its
children even if the path is a tree, nor descends into it
recursively.
This is still request-for-comments patch. There is no mailing
list consensus that this proposed new behaviour is a good one.
The patch to t/t3100-ls-tree-restrict.sh illustrates
user-visible behaviour changes. Namely:
* "git-ls-tree $tree path1 path0" lists path1 first and then
path0. It used to use paths as an output restrictor and
showed output in cache entry order (i.e. path0 first and then
path1) regardless of the order of paths arguments.
* "git-ls-tree $tree path2" lists path2 and its immediate
children but having explicit paths argument does not imply
recursive behaviour anymore, hence paths/baz is shown but not
paths/baz/b.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This changes the way how pathspec is used in the three diff-*
brothers. Earlier, they tried to grab as much information from
the original input and used pathspec to limit the output. This
version uses pathspec upfront to narrow the world diffcore
operates in, so "git-diff-* <arguments> some-directory" does not
look at things outside the specified subtree when finding
rename/copy or running pickaxe.
Since diff-tree already takes this view and does not feed
anything outside the specified directotires to begin with, this
patch does not have to touch that command.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Earier version of diffcore-rename used to keep unmodified
filepair in its output so that the last stage of the processing
that tells renames from copies can make all of rename/copy to
copies. However this had a bad interaction with other diffcore
filters that wanted to run after diffcore-rename, in that such
unmodified filepair must be retained for proper distinction
between renames and copies to happen.
This patch fixes the problem by changing the way diffcore-rename
records the information needed to distinguish "all are copies"
case and "the last one is a rename" case.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Actually use GIT_COMMITTER_DATE in git-commit-tree.
(It used to mistakenly re-use the author date)
Add test-case for it.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Use SP as the column separator except the ones before path which
uses TAB, to make the output format consistent across ls-* and
diff-* commands.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Enhance git-ls-tree to allow optional 'match paths' that
restricts the output of git-ls-tree. This is useful to retrieve
a single file's SHA1 out of a tree without creating an index.
[JC: I added the test case]
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This is the remainder of testcase fix by Mark Allen to make them
work on his Darwin box. I was using "xargs -r" (GNU) where it
was not needed, sed -ne '/^\(author\|committer\)/s|>.*|>|p'
where some sed does not know what to do with '\|', and also
"cmp - file" to compare standard input with a file, which his
cmp does not support.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This fixes another bug.
- Mode-only changes were pruned incorrectly from the output.
- Added test to catch the above problem.
- Normalize rename/copy similarity score in the diff-raw output
to per-cent, no matter what scale we internally use.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The earlier test was relying on the fact that dotfiles do not
appear in the output to prepare expected test results, which
inevitably got broken when we started handling dotfiles. Change
the test to be honest about what "--other" file it creates.
The problem was originally pointed out by Mark Allen.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This is what Linus wrote, improving what David Greaves
originally submitted.
I just added a test case and verified the patch works.
Author: David Greaves <david@dgreaves.com>
Author: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Earlier implementation had a major screw-up in the memory
management area. Rename/copy logic sometimes borrowed a pointer
to a structure without any provision for downstream to determine
which pointer is shared and which is not. This resulted in the
later clean-up code to sometimes double free such structure,
resulting in a segfault. This made -M and -C useless.
Another problem the earlier implementation had was that it
reordered the patches, and forced the logic to differentiate
renames and copies to depend on that particular order. This
problem was fixed by teaching rename/copy detection logic not to
do any reordering, and rename-copy differentiator not to depend
on the order of the patches. The diffs will leave rename/copy
detector in the same destination path order as the patch that
was fed into it. Some test vectors have been reordered to
accommodate this change.
It also adds a sanity check logic to the human-readable diff-raw
output to detect paths with embedded TAB and LF characters,
which cannot be expressed with that format. This idea came up
during a discussion with Chris Wedgwood.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
For later stages to reorder patches, pruning logic and rename detection
logic should not decide which delete to discard (because another entry
said it will take over the file as a rename) until the very end.
Also fix some tests that were assuming the earlier "last one is rename
or keep everything else is copy" semantics of diff-raw format, which no
longer is true.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This changes the diff-raw format again, following the mailing
list discussion. The new format explicitly expresses which one
is a rename and which one is a copy.
The documentation and tests are updated to match this change.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The rename/copy detection logic in earlier round was only good
enough to show patch output and discussion on the mailing list
about the diff-raw format updates revealed many problems with
it. This patch fixes all the ones known to me, without making
things I want to do later impossible, mostly related to patch
reordering.
(1) Earlier rename/copy detector determined which one is rename
and which one is copy too early, which made it impossible
to later introduce diffcore transformers to reorder
patches. This patch fixes it by moving that logic to the
very end of the processing.
(2) Earlier output routine diff_flush() was pruning all the
"no-change" entries indiscriminatingly. This was done due
to my false assumption that one of the requirements in the
diff-raw output was not to show such an entry (which
resulted in my incorrect comment about "diff-helper never
being able to be equivalent to built-in diff driver"). My
special thanks go to Linus for correcting me about this.
When we produce diff-raw output, for the downstream to be
able to tell renames from copies, sometimes it _is_
necessary to output "no-change" entries, and this patch
adds diffcore_prune() function for doing it.
(3) Earlier diff_filepair structure was trying to be not too
specific about rename/copy operations, but the purpose of
the structure was to record one or two paths, which _was_
indeed about rename/copy. This patch discards xfrm_msg
field which was trying to be generic for this wrong reason,
and introduces a couple of fields (rename_score and
rename_rank) that are explicitly specific to rename/copy
logic. One thing to note is that the information in a
single diff_filepair structure _still_ does not distinguish
renames from copies, and it is deliberately so. This is to
allow patches to be reordered in later stages.
(4) This patch also adds some tests about diff-raw format
output and makes sure that necessary "no-change" entries
appear on the output.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Earlier round was not treating symbolic links carefully enough,
and would have produced diff output that renamed/copied then
edited the contents of a symbolic link, which made no practical
sense. Change it to detect only pure renames.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Update the diff-raw format as Linus and I discussed, except that
it does not use sequence of underscore '_' letters to express
nonexistence. All '0' mode is used for that purpose instead.
The new diff-raw format can express rename/copy, and the earlier
restriction that -M and -C _must_ be used with the patch format
output is no longer necessary. The patch makes -M and -C flags
independent of -p flag, so you need to say git-whatchanged -M -p
to get the diff/patch format.
Updated are both documentations and tests.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch extends diff-cache and diff-files to report the
unmodified files to diff-core as well when -C (copy detection)
is in effect, so that the unmodified files can also be used as
the source candidates. The existing test t4003 has been
extended to cover this case.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This introduces the diff-core, the layer between the diff-tree
family and the external diff interface engine. The calls to the
interface diff-tree family uses (diff_change and diff_addremove)
have not changed and will not change. The purpose of the
diff-core layer is to provide an infrastructure to transform the
set of differences sent from the applications, before sending
them to the external diff interface.
The recently introduced rename detection code has been rewritten
to use the diff-core facility. When applications send in
separate creates and deletes, matching ones are transformed into
a single rename-and-edit diff, and sent out to the external diff
interface as such.
This patch also enhances the rename detection code further to be
able to detect copies. Currently this happens only as long as
copy sources appear as part of the modified files, but there
already is enough provision for callers to report unmodified
files to diff-core, so that they can be also used as copy source
candidates. Extending the callers this way will be done in a
separate patch.
Please see and marvel at how well this works by trying out the
newly added t/t4003-diff-rename-1.sh test script.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The version of wc I have (GNU textutils-2.1) puts spaces at the beginning
of lines. This patch should work for any version of wc.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Acked-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The same check we added earlier to update-cache to catch ENOTDIR
turns out to be missing from diff-files. This causes a
difference not being reported when you have DF/DF (a file in a
subdirectory) in the cache and DF is a file on the filesystem.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Add '-R' flag to diff-tree, and change the test subdirectory
shell files to be executable (something that Junio couldn't
get me to do through the pure patch with my current patch
handling infrastructure).
This cleans up the way calls are made into the diff core from diff-tree
family and diff-helper. Earlier, these programs had "if
(generating_patch)" sprinkled all over the place, but those ugliness are
gone and handled uniformly from the diff core, even when not generating
patch format.
This also allowed diff-cache and diff-files to acquire -R
(reverse) option to generate diff in reverse. Users of
diff-tree can swap two trees easily so I did not add -R there.
[ Linus' note: I'll add -R to "diff-tree" too, since a "commit
diff" doesn't have another tree to switch around: the other
tree is always the parent(s) of the commit ]
Also -M<digits-as-mantissa> suggestion made by Linus has been
implemented.
Documentation updates are also included.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
With -u flag, git-checkout-cache picks up the stat information
from newly created file and updates the cache. This removes the
need to run git-update-cache --refresh immediately after running
git-checkout-cache.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This rips out the rename detection engine from diff-helper and moves it
to the diff core, and updates the internal calling convention used by
diff-tree family into the diff core. In order to give the same option
name to diff-tree family as well as to diff-helper, I've changed the
earlier diff-helper '-r' option to '-M' (stands for Move; sorry but the
natural abbreviation 'r' for 'rename' is already taken for 'recursive').
Although I did a fair amount of test with the git-diff-tree with
existing rename commits in the core GIT repository, this should still be
considered beta (preview) release. This patch depends on the diff-delta
infrastructure just committed.
This implements almost everything I wanted to see in this series of
patch, except a few minor cleanups in the calling convention into diff
core, but that will be a separate cleanup patch.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This test would have caught the strbuf eof condition gotcha,
hopefully fixed with my previous patch.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This implements the output format suggested by Linus in
<Pine.LNX.4.58.0505161556260.18337@ppc970.osdl.org>, except the
imaginary diff option is spelled "diff --git" with double dashes as
suggested by Matthias Urlichs.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The documentation of the test harness still refer to old
numbering and also contains an obvious typo.
Also "make test" should be run after making sure we have built
all binaries, since test is designed to test the newly built
ones.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Petr Baudis <pasky@ucw.cz>
This test comes from "[PATCH 2/2] The core GIT tests: recent additions and
fixes" but couldn't be included before since it depended on the modechange
diff output changes.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Petr Baudis <pasky@ucw.cz>
This is an adaptation to the test framework of a historic test
that was used before three way merge form of read-tree was
introduced, and subsequently used to validate the read-tree -m
merge works correctly. It covers all the tricky cases known
back then and also have been updated to cover conflicting
files/directories cases since then.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Petr Baudis <pasky@ucw.cz>
This test makes sure that use of deprecated environment variables still
works, using both new and old names makes new one take
precedence, and GIT_DIR and GIT_ALTERNATE_OBJECT_DIRECTORIES mechanisms
work.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Petr Baudis <pasky@ucw.cz>
First digit: "family", e.g. the absolute basics and global stuff (0),
the basic db-side commands (read-tree, write-tree, commit-tree), the
basic working-tree-side commands (checkout-cache, update-cache), the
other basic commands (ls-files), the diff commands, the pull commands,
exporting commands, revision tree commands...
Second digit: the particular command we are testing
Third digit: (optionally) the particular switch or group of switches
we are testing
Freeform part: commandname-details
Described in the README.
mv t1000-checkout-cache.sh t2000-checkout-cache-clash.sh
mv t1001-checkout-cache.sh t2001-checkout-cache-clash.sh
mv t0200-update-cache.sh t2010-update-cache-badpath.sh
mv t0400-ls-files.sh t3000-ls-files-others.sh
mv t0500-ls-files.sh t3010-ls-files-killed.sh
This adds instruction for running tests, and writing new tests.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Updated to the new tidied up output style.
Signed-off-by: Petr Baudis <pasky@ucw.cz>
Exposing test_expect_success and test_expect_failure turns out
to be enough for the test scripts and there is no need for
exposing test_ok or test_failure. This patch cleans it up and
fixes the users of test_ok and test_failure.
Also test scripts have acquired a new command line flag
'--immediate' to cause them to exit upon the first failure.
This is useful especially during the development of a new test.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Petr Baudis <pasky@ucw.cz>
NO changed to FAIL and ok was right-aligned with it so that it is easier
to visually identify the failed tests, and the removal of # should reduce
the clutter on the line and aid the eye to spot the test number better.
t/Makefile now does not use double-colon rules (why would it?), the rm
-fr trash in the all rule is silent, and OPTS aren't set to blank so
that they can be taken from the environment.
This set of scripts are designed to test the features and fixes
we recently added to core GIT. The convention to call test
helper function has been changed during the framework cleanup
(take two), and these tests have been updated to use the cleaned
up test-lib.sh interface.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Note that this does not include the t2000-diff.sh script since it
tests a patch which was not applied yet.
Signed-off-by: Petr Baudis <pasky@ucw.cz>
This adds t/ directory to host test suite, a test helper
library and a basic set of tests.
Petr Baudis raised many valid points at the earlier attempts in
git mailing list. This round, test-lib.sh has been updated to a
bit more modern style, and the default output is made easier to
read. Also included is one sample test script that tests the
very basics. This test has already found one leftover bug
missed when we introduced symlink support, which has been fixed
since then. The supplied Makefile is designed to run all the
available tests.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Petr Baudis <pasky@ucw.cz>
