The write_commit_graph() method uses die() to report failure and
exit when confronted with an unexpected condition. This use of
die() in a library function is incorrect and is now replaced by
error() statements and an int return type. Return zero on success
and a negative value on failure.
Now that we use 'goto cleanup' to jump to the terminal condition
on an error, we have new paths that could lead to uninitialized
values. New initializers are added to correct for this.
The builtins 'commit-graph', 'gc', and 'commit' call these methods,
so update them to check the return value. Test that 'git commit-graph
write' returns a proper error code when hitting a failure condition
in write_commit_graph().
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts my commit c1ee5796dc ("test-lib: whitelist GIT_TR2_* in
the environment", 2019-03-30), which is now redundant.
Since e4b75d6a1d ("trace2: rename environment variables to
GIT_TRACE2*", 2019-05-19) the GIT_TRACE2* variables match the existing
GIT_TRACE* pattern added in 95a1d12e9b ("tests: scrub environment of
GIT_* variables", 2011-03-15), so we no longer need to list TR2 here.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git <cmd> --git-completion-helper" could fail if the command checks for
a repo before parse_options(). If the result is cached, later on when
the user moves to a worktree with repo, tab completion will still fail.
Avoid this by detecting errors and not cache the completion output. We
can try again and hopefully succeed next time (e.g. when a repo is
found).
Of course if --git-completion-helper fails permanently because of other
reasons (*), this will slow down completion. But I don't see any better
option to handle that case.
(*) one of those cases is if __gitcomp_builtin is called on a command
that does not support --git-completion-helper. And we do have a
generic call
__git_complete_common "$command"
but this case is protected with __git_support_parseopt_helper so we're
good.
Reported-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When fetching into a partial clone, Git first prefetches missing
REF_DELTA bases from the promisor remote. (This feature was introduced
in [1].) But as can be seen in a recent test coverage report [2], the
case in which a REF_DELTA base is already present is not covered by
tests.
Extend the tests slightly to cover this case.
[1] 8a30a1efd1 ("index-pack: prefetch missing REF_DELTA bases",
2019-05-15).
[2] https://public-inbox.org/git/396091fc-5572-19a5-4f18-61c258590dd5@gmail.com/
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we want to check whether an object is missing, the correct flag to
pass to rev-list is --ignore-missing; --exclude-promisor-objects will
exclude any object that came from the promisor remote, whether it is
present or missing. Use the correct flag.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Subshells for pipelines are not required. This can save a number of
processes (if the shell does not optimize it away anyway).
The patch was generated with the command
sed -i 's/( *\(yes.*[^ ]\) *) *\&\&/\1 \&\&/' t7610-mergetool.sh
with a manual fixup of the case having no && at the end.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
HP aCC does not accept any of the previously tested CC_LD_DYNPATH
formats, but only its own[1] "-Wl,+b" format. Add it to configure.ac.
1. http://nixdoc.net/man-pages/hp-ux/man1/ld_pa.1.html
Signed-off-by: Michael Osipov <michael.osipov@siemens.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One can see that an alias that begins with a non-command first word,
such as `loud-rebase = -c commit.verbose=true rebase`, is permitted.
However, this isn't immediately obvious to users as alias instances
typically begin with a command.
Document the fact that an alias can begin with a non-command first word
so that users will be able to discover that this is a feature.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before, the documentation would mix " and ' for code and config
snippets. Change these instances to ` so that they are marked up in
monospace.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As many CI/CD tools don't allow to control command line options when
executing `git tag` command, a default value in the configuration file
will allow to enforce tag signing if required.
The new config-file option tag.gpgSign is added to define default behavior
of tag signings. To override default behavior the command line option -s,
--sign and --no-sign can be used:
$ git tag -m "commit message"
will generate a GPG signed tag if tag.gpgSign option is true, while
$ git tag --no-sign -m "commit message"
will skip the signing step.
Signed-off-by: Tigran Mkrtchyan <tigran.mkrtchyan@desy.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, if a user wishes to have individual settings per branch, they
are required to manually keep track of the settings in their head and
manually set the options on the command-line or change the config at
each branch.
Teach config the "onbranch:" includeIf condition so that it can
conditionally include configuration files if the branch that is checked
out in the current worktree matches the pattern given.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In commit 8daec1df03 ("merge-recursive: switch from (oid,mode) pairs
to a diff_filespec", 2019-04-05), we actually switched from
(oid,mode,path) triplets to a diff_filespec -- but most callsites in the
patch only needed to worry about oid and mode so the commit message
focused on that. The oversight in the commit message apparently spilled
over to the code as well; one of the dozen or so callsites accidentally
dropped the setting of the path in the conversion. Restore the path
setting in that location.
Also, this pointed out that our testsuite was lacking a good rename/add
test, at least one that involved the need for merge content with the
rename. Add such a test, and since rename/add vs. add/rename could
possibly be important, redo the merge the opposite direction to make
sure we don't have issues with the direction of the merge. These
testcases failed before restoring the setting of path, but with the
paths appropriately set the testcases both pass.
Reported-by: Ben Humphreys <behumphreys@atlassian.com>
Based-on-patch-by: SZEDER Gábor <szeder.dev@gmail.com>
Tested-by: Ben Humphreys <behumphreys@atlassian.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ForEachMacros list can reasonably be generated grepping
the C source code for macros with 'for_each' in their name.
Taken almost verbatim from the .clang-format file in the Linux kernel.
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no reason to allow %00 to terminate a string, so do not allow it.
Otherwise, we end up returning arbitrary content in the string (that which is
after the %00) which is effectively hidden from callers and can escape sanity
checks and validation, and possible be used in tandem with a security
vulnerability to introduce a payload.
Helped-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Matthew DeVore <matvore@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
url_decode_internal could have been tricked into reading past the length
of the **query buffer if there are fewer than 2 characters after a % (in
a null-terminated string, % would have to be the last character).
Prevent this from happening by checking len before decoding the %
sequence.
Helped-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Matthew DeVore <matvore@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Renew paragraphs relevant for pattern with slash.
Aim to make it more clear and to avoid possible
pitfalls for the reader. Add some examples.
Signed-off-by: Dr. Adam Nielsen <admin@in-ici.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit e198b3a740 changed the behavior of fetch with regards to tags.
Before, null oids where not ignored, now they are, regardless of whether
the refs have been explicitly cleared or not.
e198b3a740 (fetch: replace string-list used as a look-up table with a hashmap)
When using a transport helper the oids can certainly be null. So now
tags are ignored and fetching them is impossible.
This patch fixes that by having a specific flag that is set only when we
explicitly want to ignore the refs, restoring the original behavior.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The comment makes it seem as if the condition is the other way around.
The exception is when the oid is null, so check for that.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create a helper function to clear an item. The way items are cleared has
changed, and will change again soon.
No functional changes.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This used to work, but commit e198b3a740 broke it.
e198b3a740 (fetch: replace string-list used as a look-up table with a hashmap)
Probably all remote helpers that use the import method are affected, but
we didn't catch the issue.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code is much simpler this way, specially thanks to:
git fast-export --refspec
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'master' of git://git.kernel.org/pub/scm/git/git:
Git 2.22-rc3
i18n: fix typos found during l10n for git 2.22.0
RelNotes: minor typo fixes in 2.22.0 draft
list-objects-filter: disable 'sparse:path' filters
Disable "--filter=sparse:path=<path>" that would allow reading from
paths on the filesystem.
* cc/list-objects-filter-wo-sparse-path:
list-objects-filter: disable 'sparse:path' filters
Fix two typos introduced by the following commits:
+ 31fba9d3b4 (diff-parseopt: convert --[src|dst]-prefix, 2019-03-24)
+ ed8b4132c8 (remote-curl: mark all error messages for translation,
2019-03-05)
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
