The same mechanism is used even for porting this submodule
subcommand, as used in the ported subcommands till now.
The function cmd_deinit in split up after porting into four
functions: module_deinit(), for_each_listed_submodule(),
deinit_submodule() and deinit_submodule_cb().
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Prathamesh Chavan <pc44800@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Port the submodule subcommand 'sync' from shell to C using the same
mechanism as that used for porting submodule subcommand 'status'.
Hence, here the function cmd_sync() is ported from shell to C.
This is done by introducing four functions: module_sync(),
sync_submodule(), sync_submodule_cb() and print_default_remote().
The function print_default_remote() is introduced for getting
the default remote as stdout.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Prathamesh Chavan <pc44800@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The message spans over 2 lines but the C concatenation does not add
the needed space between the two lines.
Signed-off-by: Jean-Noel Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Conversion from uchar[20] to struct object_id continues.
* bc/object-id: (25 commits)
refs/files-backend: convert static functions to object_id
refs: convert read_raw_ref backends to struct object_id
refs: convert peel_object to struct object_id
refs: convert resolve_ref_unsafe to struct object_id
worktree: convert struct worktree to object_id
refs: convert resolve_gitlink_ref to struct object_id
Convert remaining callers of resolve_gitlink_ref to object_id
sha1_file: convert index_path and index_fd to struct object_id
refs: convert reflog_expire parameter to struct object_id
refs: convert read_ref_at to struct object_id
refs: convert peel_ref to struct object_id
builtin/pack-objects: convert to struct object_id
pack-bitmap: convert traverse_bitmap_commit_list to object_id
refs: convert dwim_log to struct object_id
builtin/reflog: convert remaining unsigned char uses to object_id
refs: convert dwim_ref and expand_ref to struct object_id
refs: convert read_ref and read_ref_full to object_id
refs: convert resolve_refdup and refs_resolve_refdup to struct object_id
Convert check_connected to use struct object_id
refs: update ref transactions to use struct object_id
...
GSoC.
* pc/submodule-helper:
submodule: port submodule subcommand 'status' from shell to C
submodule--helper: introduce for_each_listed_submodule()
submodule--helper: introduce get_submodule_displaypath()
All of the callers already pass the hash member of struct object_id, so
update them to pass a pointer to the struct directly,
This transformation was done with an update to declaration and
definition and the following semantic patch:
@@
expression E1, E2, E3, E4;
@@
- resolve_refdup(E1, E2, E3.hash, E4)
+ resolve_refdup(E1, E2, &E3, E4)
@@
expression E1, E2, E3, E4;
@@
- resolve_refdup(E1, E2, E3->hash, E4)
+ resolve_refdup(E1, E2, E3, E4)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This aims to make git-submodule 'status' a built-in. Hence, the function
cmd_status() is ported from shell to C. This is done by introducing
four functions: module_status(), submodule_status_cb(),
submodule_status() and print_status().
The function module_status() acts as the front-end of the subcommand.
It parses subcommand's options and then calls the function
module_list_compute() for computing the list of submodules. Then
this functions calls for_each_listed_submodule() looping through the
list obtained.
Then for_each_listed_submodule() calls submodule_status_cb() for each of
the submodule in its list. The function submodule_status_cb() calls
submodule_status() after passing appropriate arguments to the funciton.
Function submodule_status() is responsible for generating the status
each submodule it is called for, and then calls print_status().
Finally, the function print_status() handles the printing of submodule's
status.
Function set_name_rev() is also ported from git-submodule to the
submodule--helper builtin function compute_rev_name(), which now
generates the value of the revision name as required.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Prathamesh Chavan <pc44800@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce function for_each_listed_submodule() and replace a loop
in module_init() with a call to it.
The new function will also be used in other parts of the
system in later patches.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Prathamesh Chavan <pc44800@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce function get_submodule_displaypath() to replace the code
occurring in submodule_init() for generating displaypath of the
submodule with a call to it.
This new function will also be used in other parts of the system
in later patches.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Prathamesh Chavan <pc44800@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up.
* rs/resolve-ref-optional-result:
refs: pass NULL to resolve_ref_unsafe() if hash is not needed
refs: pass NULL to refs_resolve_ref_unsafe() if hash is not needed
refs: make sha1 output parameter of refs_resolve_ref_unsafe() optional
This allows us to get rid of some write-only variables, among them seven
SHA1 buffers.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gcc 7 adds -Wimplicit-fallthrough, which can warn when a
switch case falls through to the next case. The general idea
is that the compiler can't tell if this was intentional or
not, so you should annotate any intentional fall-throughs as
such, leaving it to complain about any unannotated ones.
There's a GNU __attribute__ which can be used for
annotation, but of course we'd have to #ifdef it away on
non-gcc compilers. Gcc will also recognize
specially-formatted comments, which matches our current
practice. Let's extend that practice to all of the
unannotated sites (which I did look over and verify that
they were behaving as intended).
Ideally in each case we'd actually give some reasons in the
comment about why we're falling through, or what we're
falling through to. And gcc does support that with
-Wimplicit-fallthrough=2, which relaxes the comment pattern
matching to anything that contains "fallthrough" (or a
variety of spelling variants). However, this isn't the
default for -Wimplicit-fallthrough, nor for -Wextra. In the
name of simplicity, it's probably better for us to support
the default level, which requires "fallthrough" to be the
only thing in the comment (modulo some window dressing like
"else" and some punctuation; see the gcc manual for the
complete set of patterns).
This patch suppresses all warnings due to
-Wimplicit-fallthrough. We might eventually want to add that
to the DEVELOPER Makefile knob, but we should probably wait
until gcc 7 is more widely adopted (since earlier versions
will complain about the unknown warning type).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up to avoid mixing values read from the .gitmodules file
and values read from the .git/config file.
* bw/submodule-config-cleanup:
submodule: remove gitmodules_config
unpack-trees: improve loading of .gitmodules
submodule-config: lazy-load a repository's .gitmodules file
submodule-config: move submodule-config functions to submodule-config.c
submodule-config: remove support for overlaying repository config
diff: stop allowing diff to have submodules configured in .git/config
submodule: remove submodule_config callback routine
unpack-trees: don't respect submodule.update
submodule: don't rely on overlayed config when setting diffopts
fetch: don't overlay config with submodule-config
submodule--helper: don't overlay config in update-clone
submodule--helper: don't overlay config in remote_submodule_branch
add, reset: ensure submodules can be added or reset
submodule: don't use submodule_from_name
t7411: check configuration parsing errors
"git grep --recurse-submodules" has been reworked to give a more
consistent output across submodule boundary (and do its thing
without having to fork a separate process).
* bw/grep-recurse-submodules:
grep: recurse in-process using 'struct repository'
submodule: merge repo_read_gitmodules and gitmodules_config
submodule: check for unmerged .gitmodules outside of config parsing
submodule: check for unstaged .gitmodules outside of config parsing
submodule: remove fetch.recursesubmodules from submodule-config parsing
submodule: remove submodule.fetchjobs from submodule-config parsing
config: add config_from_gitmodules
cache.h: add GITMODULES_FILE macro
repository: have the_repository use the_index
repo_read_index: don't discard the index
"git push --recurse-submodules $there HEAD:$target" was not
propagated down to the submodules, but now it is.
* bw/push-options-recursively-to-submodules:
submodule--helper: teach push-check to handle HEAD
Now that the submodule-config subsystem can lazily read the gitmodules
file we no longer need to explicitly pre-read the gitmodules by calling
'gitmodules_config()' so let's remove it.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the last remaining caller of 'submodule_config()' as well as the
function itself.
With 'submodule_config()' being removed the submodule-config API can be
a little simpler as callers don't need to worry about whether or not
they need to overlay the repository's config on top of the
submodule-config. This also makes it more difficult to accidentally
add non-submodule specific configuration to the .gitmodules file.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't rely on overlaying the repository's config on top of the
submodule-config, instead query the repository's config directly for the
url and the update strategy configuration.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't rely on overlaying the repository's config on top of the
submodule-config, instead query the repository's config directly for the
branch field.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* bc/object-id:
sha1_name: convert uses of 40 to GIT_SHA1_HEXSZ
sha1_name: convert GET_SHA1* flags to GET_OID*
sha1_name: convert get_sha1* to get_oid*
Convert remaining callers of get_sha1 to get_oid.
builtin/unpack-file: convert to struct object_id
bisect: convert bisect_checkout to struct object_id
builtin/update_ref: convert to struct object_id
sequencer: convert to struct object_id
remote: convert struct push_cas to struct object_id
submodule: convert submodule config lookup to use object_id
builtin/merge-tree: convert remaining caller of get_sha1 to object_id
builtin/fsck: convert remaining caller of get_sha1 to object_id
tag: convert gpg_verify_tag to use struct object_id
commit: convert lookup_commit_graft to struct object_id
The '.gitmodules' file should only contain information pertinent to
configuring individual submodules (name to path mapping, URL where to
obtain the submodule, etc.) while other configuration like the number of
jobs to use when fetching submodules should be a part of the
repository's config.
Remove the 'submodule.fetchjobs' configuration option from the general
submodule-config parsing and instead rely on using the
'config_from_gitmodules()' in order to maintain backwards compatibility
with this config being placed in the '.gitmodules' file.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By declaring the task_cb parameter of type `void **`, the signature of
the get_next_task method suggests that the "task-specific cookie" can be
defined in that method, and the signatures of the start_failure and of
the task_finished methods declare that parameter of type `void *`,
suggesting that those methods are mere users of said cookie.
That convention makes a total lot of sense, because the tasks are pretty
much dead when one of the latter two methods is called: there would be
little use to reset that cookie at that point because nobody would be
able to see the change afterwards.
However, this is not what the code actually does. For all three methods,
it passes the *address* of pp->children[i].data.
As reasoned above, this behavior makes no sense. So let's change the
implementation to adhere to the convention suggested by the signatures.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Acked-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 06bf4ad1d (push: propagate remote and refspec with
--recurse-submodules) push was taught how to propagate a refspec down to
submodules when the '--recurse-submodules' flag is given. The only refspecs
that are allowed to be propagated are ones which name a ref which exists
in both the superproject and the submodule, with the caveat that 'HEAD'
was disallowed.
This patch teaches push-check (the submodule helper which determines if
a refspec can be propagated to a submodule) to permit propagating 'HEAD'
if and only if the superproject and the submodule both have the same
named branch checked out and the submodule is not in a detached head
state.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The helper function utf8_fprintf(fp, ...) has exactly the same
effect to the output stream fp as fprintf(fp, ...) does, and the
only difference is that its return value counts in display columns
consumed (assuming that the payload is encoded in UTF-8), as opposed
to number of bytes.
There is no reason to call it unless the caller cares about its
return value.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert 'is_submodule_initialized()' to take a repository object and
while we're at it, lets rename the function to 'is_submodule_active()'
and remove the NEEDSWORK comment.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* bw/ls-files-sans-the-index:
ls-files: factor out tag calculation
ls-files: factor out debug info into a function
ls-files: convert show_files to take an index
ls-files: convert show_ce_entry to take an index
ls-files: convert prune_cache to take an index
ls-files: convert ce_excluded to take an index
ls-files: convert show_ru_info to take an index
ls-files: convert show_other_files to take an index
ls-files: convert show_killed_files to take an index
ls-files: convert write_eolinfo to take an index
ls-files: convert overlay_tree_on_cache to take an index
tree: convert read_tree to take an index parameter
convert: convert renormalize_buffer to take an index
convert: convert convert_to_git to take an index
convert: convert convert_to_git_filter_fd to take an index
convert: convert crlf_to_git to take an index
convert: convert get_cached_convert_stats_ascii to take an index
* bw/config-h:
config: don't implicitly use gitdir or commondir
config: respect commondir
setup: teach discover_git_directory to respect the commondir
config: don't include config.h by default
config: remove git_config_iter
config: create config.h
alias: use the early config machinery to expand aliases
t7006: demonstrate a problem with aliases in subdirectories
t1308: relax the test verifying that empty alias values are disallowed
help: use early config when autocorrecting aliases
config: report correct line number upon error
discover_git_directory(): avoid setting invalid git_dir
"git $cmd -h" for builtin commands calls the implementation of the
command (i.e. cmd_$cmd() function) without doing any repository
set-up, and the commands that expect RUN_SETUP is done by the Git
potty needs to be prepared to show the help text without barfing.
* jk/consistent-h:
t0012: test "-h" with builtins
git: add hidden --list-builtins option
version: convert to parse-options
diff- and log- family: handle "git cmd -h" early
submodule--helper: show usage for "-h"
remote-{ext,fd}: print usage message on invalid arguments
upload-archive: handle "-h" option early
credential: handle invalid arguments earlier
Stop including config.h by default in cache.h. Instead only include
config.h in those files which require use of the config system.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Normal users shouldn't ever call submodule--helper, but it
doesn't hurt to give them a normal usage message if they try
"-h".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since (ae8d08242 pathspec: pass directory indicator to
match_pathspec_item()) the path matching logic has been able to cope
with submodules without needing to strip off a trailing slash if a path
refers to a submodule.
Since stripping the slash is no longer necessary, remove the
PATHSPEC_STRIP_SUBMODULE_SLASH_CHEAP flag.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a segv in 'submodule init' when url is not given for a submodule.
* jk/submodule-init-segv-fix:
submodule_init: die cleanly on submodules without url defined
When we init a submodule, we try to die when it has no URL
defined:
url = xstrdup(sub->url);
if (!url)
die(...);
But that's clearly nonsense. xstrdup() will never return
NULL, and if sub->url is NULL, we'll segfault.
These two bits of code need to be flipped, so we check
sub->url before looking at it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the 'push-check' subcommand to submodule--helper which is used to
check if the provided remote and refspec can be used as part of a push
operation in the submodule.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"what URL do we want to update this submodule?" and "are we
interested in this submodule?" are split into two distinct
concepts, and then the way used to express the latter got extended,
paving a way to make it easier to manage a project with many
submodules and make it possible to later extend use of multiple
worktrees for a project with submodules.
* bw/submodule-is-active:
submodule add: respect submodule.active and submodule.<name>.active
submodule--helper init: set submodule.<name>.active
clone: teach --recurse-submodules to optionally take a pathspec
submodule init: initialize active submodules
submodule: decouple url and submodule interest
submodule--helper clone: check for configured submodules using helper
submodule sync: use submodule--helper is-active
submodule sync: skip work for inactive submodules
submodule status: use submodule--helper is-active
submodule--helper: add is-active subcommand
"git checkout" is taught the "--recurse-submodules" option.
* sb/checkout-recurse-submodules:
builtin/read-tree: add --recurse-submodules switch
builtin/checkout: add --recurse-submodules switch
entry.c: create submodules when interesting
unpack-trees: check if we can perform the operation for submodules
unpack-trees: pass old oid to verify_clean_submodule
update submodules: add submodule_move_head
submodule.c: get_super_prefix_or_empty
update submodules: move up prepare_submodule_repo_env
submodules: introduce check to see whether to touch a submodule
update submodules: add a config option to determine if submodules are updated
update submodules: add submodule config parsing
make is_submodule_populated gently
lib-submodule-update.sh: define tests for recursing into submodules
lib-submodule-update.sh: replace sha1 by hash
lib-submodule-update: teach test_submodule_content the -C <dir> flag
lib-submodule-update.sh: do not use ./. as submodule remote
lib-submodule-update.sh: reorder create_lib_submodule_repo
submodule--helper.c: remove duplicate code
connect_work_tree_and_git_dir: safely create leading directories
When initializing a submodule set the submodule.<name>.active config to
true if the module hasn't already been configured to be active by some
other means (e.g. a pathspec set in submodule.active).
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach `submodule init` to initialize submodules which have been
configured to be active by setting 'submodule.active' with a pathspec.
Now if no path arguments are given and 'submodule.active' is configured,
`init` will initialize all submodules which have been configured to be
active. If no path arguments are given and 'submodule.active' is not
configured, then `init` will retain the old behavior of initializing all
submodules.
This allows users to record more complex patterns as it saves retyping
them whenever you invoke update.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the 'is_submodule_initialized()' helper to check for configured
submodules instead of manually checking for the submodule's URL in the
config.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The definition of which submodules are of interest by the user
is tied to the configuration submodule.<name>.url; when it is
set to a non-empty string, it is of interest. We'd want to be
able to later change this definition, but there are many places
that explicitly check this condition in the scripted Porcelain.
Introduce the "is-active" subcommand to "submodule--helper", so
that the exact definition of what submodule is of interest can
be centrally defined (and changed in later steps). In a few
patches that follow, this helper is used to replace the explicit
checks of the configuration variable in scripts.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove code fragment from module_clone that duplicates functionality
of connect_work_tree_and_git_dir in dir.c
Signed-off-by: Valery Tolstov <me@vtolstov.org>
Reviewed-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a submodule is initialized, the config variable 'submodule.<name>.url'
is set depending on the value of the same variable in the .gitmodules
file. When the URL indicates to be relative, then the url is computed
relative to its default remote. The default remote cannot be determined
accurately in all cases, such that it falls back to 'origin'.
The 'origin' remote may not exist, though. In that case we give up looking
for a suitable remote and we'll just assume it to be a local relative path.
This can be confusing to users as there is a lot of guessing involved,
which is not obvious to the user.
So in the corner case of assuming a local autoritative truth, warn the
user to lessen the confusion.
This behavior was introduced in 4d6893200 (submodule add: allow relative
repository path even when no url is set, 2011-06-06), which shared the
code with submodule-init and then ported to C in 3604242f08 (submodule:
port init from shell to C, 2016-04-15).
In case of submodule-add, this behavior makes sense in some use cases[1],
however for submodule-init there does not seem to be an immediate obvious
use case to fall back to a local submodule. However there might be, so
warn instead of die here.
While adding the warning, also clarify the behavior of relative URLs in
the documentation.
[1] e.g. http://stackoverflow.com/questions/8721984/git-ignore-files-for-public-repository-but-not-for-private
"store a secret locally in a submodule, with no intention to publish it"
Reported-by: Shawn Pearce <spearce@spearce.org>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the semantic patch for converting callers that duplicate the
result of absolute_path() to call absolute_pathdup() instead, which
avoids an extra string copy to a static buffer.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
