* jc/decorate-leaky-separator-color:
log --decorate: do not leak "commit" color into the next item
Documentation/config.txt: simplify boolean description in the syntax section
Documentation/config.txt: describe 'color' value type in the "Values" section
Documentation/config.txt: have a separate "Values" section
Documentation/config.txt: describe the structure first and then meaning
Documentation/config.txt: explain multi-valued variables once
Documentation/config.txt: avoid unnecessary negation
In "git log --decorate", you would see the commit header like this:
commit ... (HEAD, jc/decorate-leaky-separator-color)
where "commit ... (" is painted in color.diff.commit, "HEAD" in
color.decorate.head, ", " in color.diff.commit, the branch name in
color.decorate.branch and then closing ")" in color.diff.commit.
If you wanted to paint the HEAD and local branch name in the same
color as the body text (perhaps because cyan and green are too faint
on a black-on-white terminal to be readable), you would not want to
have to say
[color "decorate"]
head = black
branch = black
because that you would not be able to reuse same configuration on a
white-on-black terminal. You would naively expect
[color "decorate"]
head = normal
branch = normal
to work, but unfortunately it does not. It paints the string "HEAD"
and the branch name in the same color as the opening parenthesis or
comma between the decoration elements. This is because the code
forgets to reset the color after printing the "prefix" in its own
color.
It theoretically is possible that some people were expecting and
relying on that the attribute set as the "diff.commit" color, which
is used to draw these opening parenthesis and inter-item comma, is
inherited by the drawing of branch names, but it is not how the
coloring works everywhere else.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Originally the color-parsing function was used only for
config variables. It made sense to pass the variable name so
that the die() message could be something like:
$ git -c color.branch.plain=bogus branch
fatal: bad color value 'bogus' for variable 'color.branch.plain'
These days we call it in other contexts, and the resulting
error messages are a little confusing:
$ git log --pretty='%C(bogus)'
fatal: bad color value 'bogus' for variable '--pretty format'
$ git config --get-color foo.bar bogus
fatal: bad color value 'bogus' for variable 'command line'
This patch teaches color_parse to complain only about the
value, and then return an error code. Config callers can
then propagate that up to the config parser, which mentions
the variable name. Other callers can provide a custom
message. After this patch these three cases now look like:
$ git -c color.branch.plain=bogus branch
error: invalid color value: bogus
fatal: unable to parse 'color.branch.plain' from command-line config
$ git log --pretty='%C(bogus)'
error: invalid color value: bogus
fatal: unable to parse --pretty format
$ git config --get-color foo.bar bogus
error: invalid color value: bogus
fatal: unable to parse default color value
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many config-parsing helpers, like parse_branch_color_slot,
take the name of a config variable and an offset to the
"slot" name (e.g., "color.branch.plain" is passed along with
"13" to effectively pass "plain"). This is leftover from the
time that these functions would die() on error, and would
want the full variable name for error reporting.
These days they do not use the full variable name at all.
Passing a single pointer to the slot name is more natural,
and lets us more easily adjust the callers to use skip_prefix
to avoid manually writing offset numbers.
This is effectively a continuation of 9e1a5eb, which did the
same for parse_diff_color_slot. This patch covers all of the
remaining similar constructs.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The pretty-format specifier "%d", which expanded to " (tagname)"
for a tagged commit, gained a cousin "%D" that just gives the
"tagname" without frills.
* hj/pretty-naked-decoration:
pretty: add %D format specifier
Add a new format specifier, '%D' that is identical in behaviour to '%d',
except that it does not include the ' (' prefix or ')' suffix provided
by '%d'.
Signed-off-by: Harry Jeffery <harry@exec64.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The API to allocate the structure to keep track of commit
decoration was cumbersome to use, inviting lazy code to
overallocate memory.
* jk/name-decoration-alloc:
log-tree: use FLEX_ARRAY in name_decoration
log-tree: make name_decoration hash static
log-tree: make add_name_decoration a public function
We are already using the flex-array technique; let's
annotate it with our usual FLEX_ARRAY macro. Besides being
more readable, this is slightly more efficient on compilers
that understand flex-arrays.
Note that we need to bump the allocation in add_name_decoration,
which did not explicitly add one byte for the NUL terminator
of the string we are putting into the flex-array (it did not
need to before, because the struct itself was over-allocated
by one byte).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the previous commit, we made add_name_decoration global
so that adders would not have to access the hash directly.
We now make the hash itself static so that callers _have_ to
add through our function, making sure that all additions go
through a single point. To do this, we have to add one more
accessor function: a way to lookup entries in the hash.
Since the only caller doesn't actually look at the returned
value, but rather only asks whether there is a decoration or
not, we could provide only a boolean "has_name_decoration".
That would allow us to make "struct name_decoration" local
to log-tree, as well.
However, it's unlikely to cause any maintainability harm
making the actual data public, and this interface is more
flexible if we need to look at decorations from other parts
of the code in the future.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The log-tree code keeps a "struct decoration" hash to show
text decorations for each commit during log traversals. It
makes this available to other files by providing global
access to the hash. This can result in other code adding
entries that do not conform to what log-tree expects.
For example, the bisect code adds its own "dist"
decorations to be shown. Originally the bisect code was
correct, but when the name_decoration code grew a new field
in eb3005e (commit.h: add 'type' to struct name_decoration,
2010-06-19), the bisect code was not updated. As a result,
the log-tree code can access uninitialized memory and even
segfault.
We can fix this by making name_decoration's adding function
public. If all callers use it, then any changes to struct
initialization only need to happen in one place (and because
the members come in as parameters, the compiler can notice a
caller who does not supply enough information).
As a bonus, this also means that the decoration hashes
created by the bisect code will use less memory (previously
we over-allocated space for the distance integer, but now we
format it into a temporary buffer and copy it to the final
flex-array).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user provides an empty format with "--format=", we
end up putting in extra whitespace that the user cannot
prevent. This comes from two places:
1. If the format is missing a terminating newline, we add
one automatically. This makes sense for --format=%h, but
not for a truly empty format.
2. We add an extra newline between the pretty-printed
format and a diff or diffstat. If the format is empty,
there's no point in doing so if there's nothing to
separate.
With this patch, one can get a diff with no other cruft out
of "diff-tree --format= $commit".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A wrong '}' made our code record the results of mergetag signature
verification incorrectly.
Fix it.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git log --graph --show-signature command incorrectly indents the gpg
information about signed commits and merged signed tags. It does not
follow the level of indentation of the current commit.
Example of garbled output:
$ git log --show-signature --graph
* commit 258e0a237cb69aaa587b0a4fb528bb0316b1b776
|\ gpg: Signature made Mon, Jun 30, 2014 13:22:33 EDT using RSA key ID DA08
gpg: Good signature from "Jason Pyeron <jpye...@pdinc.us>"
Merge: 727c355 1ca13ed
| | Author: Jason Pyeron <jpye...@pdinc.us>
| | Date: Mon Jun 30 13:22:29 2014 -0400
| |
| | Merge of 1ca13ed2271d60ba9 branch - rebranding
| |
| * commit 1ca13ed2271d60ba93d40bcc8db17ced8545f172
| | gpg: Signature made Mon, Jun 23, 2014 9:45:47 EDT using RSA key ID DD37
gpg: Good signature from "Stephen Robert Guglielmo <s...@guglielmo.us>"
gpg: aka "Stephen Robert Guglielmo <srguglie...@gmail.com>"
Author: Stephen R Guglielmo <s...@guglielmo.us>
| | Date: Mon Jun 23 09:45:27 2014 -0400
| |
| | Minor URL updates
In log-tree.c modify show_sig_lines() function to call graph_show_oneline()
after each line of gpg information it has printed in order to preserve
the level of indentation for the next output line.
Reported-by: Jason Pyeron <jpyeron@pdinc.us>
Signed-off-by: Zoltan Klinger <zoltan.klinger@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the same way as there is for_each_ref() to iterate on refs,
for_each_mergetag() allows the caller to iterate on the mergetags of
a given commit. Use it to rewrite show_mergetag() used in "git log".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we call show_signature or show_mergetag, we read the
commit object fresh via read_sha1_file and reparse its
headers. However, in most cases we already have the object
data available, attached to the "struct commit". This is
partially laziness in dealing with the memory allocation
issues, but partially defensive programming, in that we
would always want to verify a clean version of the buffer
(not one that might have been munged by other users of the
commit).
However, we do not currently ever munge the commit buffer,
and not using the already-available buffer carries a fairly
big performance penalty when we are looking at a large
number of commits. Here are timings on linux.git:
[baseline, no signatures]
$ time git log >/dev/null
real 0m4.902s
user 0m4.784s
sys 0m0.120s
[before]
$ time git log --show-signature >/dev/null
real 0m14.735s
user 0m9.964s
sys 0m0.944s
[after]
$ time git log --show-signature >/dev/null
real 0m9.981s
user 0m5.260s
sys 0m0.936s
Note that our user CPU time drops almost in half, close to
the non-signature case, but we do still spend more
wall-clock and system time, presumably from dealing with
gpg.
An alternative to this is to note that most commits do not
have signatures (less than 1% in this repo), yet we pay the
re-parsing cost for every commit just to find out if it has
a mergetag or signature. If we checked that when parsing the
commit initially, we could avoid re-examining most commits
later on. Even if we did pursue that direction, however,
this would still speed up the cases where we _do_ have
signatures. So it's probably worth doing either way.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most callsites which use the commit buffer try to use the
cached version attached to the commit, rather than
re-reading from disk. Unfortunately, that interface provides
only a pointer to the NUL-terminated buffer, with no
indication of the original length.
For the most part, this doesn't matter. People do not put
NULs in their commit messages, and the log code is happy to
treat it all as a NUL-terminated string. However, some code
paths do care. For example, when checking signatures, we
want to be very careful that we verify all the bytes to
avoid malicious trickery.
This patch just adds an optional "size" out-pointer to
get_commit_buffer and friends. The existing callers all pass
NULL (there did not seem to be any obvious sites where we
could avoid an immediate strlen() call, though perhaps with
some further refactoring we could).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some call sites check commit->buffer to see whether we have
a cached buffer, and if so, do some work with it. In the
long run we may want to switch these code paths to make
their decision on a different boolean flag (because checking
the cache may get a little more expensive in the future).
But for now, we can easily support them by converting the
calls to use get_cached_commit_buffer.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Attempts to show where a single-strand-of-pearls break in "git log"
output.
* nd/log-show-linear-break:
log: add --show-linear-break to help see non-linear history
object.h: centralize object flag allocation
Option explanation is in rev-list-options.txt. The interaction with -z
is left undecided.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The semantics of this flag was changed in commit
e1111cef23 inline lookup_replace_object() calls
but wasn't renamed at the time to minimize code churn. Rename it now,
and add a comment explaining its use.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git log did not correctly handle decorations when a tag object referenced
another tag object that was no longer a ref, such as when the second tag was
deleted. The commit would not be decorated correctly because parse_object had
not been called on the second tag and therefore its tagged field had not been
filled in, resulting in none of the tags being associated with the relevant
commit.
Call parse_object to fill in this field if it is absent so that the chain of
tags can be dereferenced and the commit can be properly decorated. Include
tests as well to prevent future regressions.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove a few duplicate implementations of prefix/suffix comparison
functions, and rename them to starts_with and ends_with.
* cc/starts-n-ends-with:
replace {pre,suf}fixcmp() with {starts,ends}_with()
strbuf: introduce starts_with() and ends_with()
builtin/remote: remove postfixcmp() and use suffixcmp() instead
environment: normalize use of prefixcmp() by removing " != 0"
Leaving only the function definitions and declarations so that any
new topic in flight can still make use of the old functions, replace
existing uses of the prefixcmp() and suffixcmp() with new API
functions.
The change can be recreated by mechanically applying this:
$ git grep -l -e prefixcmp -e suffixcmp -- \*.c |
grep -v strbuf\\.c |
xargs perl -pi -e '
s|!prefixcmp\(|starts_with\(|g;
s|prefixcmp\(|!starts_with\(|g;
s|!suffixcmp\(|ends_with\(|g;
s|suffixcmp\(|!ends_with\(|g;
'
on the result of preparatory changes in this series.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/robustify-parse-commit:
checkout: do not die when leaving broken detached HEAD
use parse_commit_or_die instead of custom message
use parse_commit_or_die instead of segfaulting
assume parse_commit checks for NULL commit
assume parse_commit checks commit->object.parsed
log_tree_diff: die when we fail to parse a commit
We currently call parse_commit and then assume we can
dereference the resulting "tree" struct field. If parsing
failed, however, that field is NULL and we end up
segfaulting.
Instead of a segfault, let's print an error message and die
a little more gracefully.
Note that this should never happen in practice, but may
happen in a corrupt repository.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using pathspec filtering in combination with diff-based log
output, parent simplification happens before the diff is computed.
The diff is therefore against the *simplified* parents.
This works okay, arguably by accident, in the normal case:
simplification reduces to one parent as long as the commit is TREESAME
to it. So the simplified parent of any given commit must have the
same tree contents on the filtered paths as its true (unfiltered)
parent.
However, --full-diff breaks this guarantee, and indeed gives pretty
spectacular results when comparing the output of
git log --graph --stat ...
git log --graph --full-diff --stat ...
(--graph internally kicks in parent simplification, much like
--parents).
To fix it, store a copy of the parent list before simplification (in a
slab) whenever --full-diff is in effect. Then use the stored parents
instead of the simplified ones in the commit display code paths. The
latter do not actually check for --full-diff to avoid duplicated code;
they just grab the original parents if save_parents() has not been
called for this revision walk.
For ordinary commits it should be obvious that this is the right thing
to do.
Merge commits are a bit subtle. Observe that with default
simplification, merge simplification is an all-or-nothing decision:
either the merge is TREESAME to one parent and disappears, or it is
different from all parents and the parent list remains intact.
Redundant parents are not pruned, so the existing code also shows them
as a merge.
So if we do show a merge commit, the parent list just consists of the
rewrite result on each parent. Running, e.g., --cc on this in
--full-diff mode is not very useful: if any commits were skipped, some
hunks will disagree with all sides of the merge (with one side,
because commits were skipped; with the others, because they didn't
have those changes in the first place). This triggers --cc showing
these hunks spuriously.
Therefore I believe that even for merge commits it is better to show
the diffs wrt. the original parents.
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git format-patch" learned "--from[=whom]" option, which sets the
"From: " header to the specified person (or the person who runs the
command, if "=whom" part is missing) and move the original author
information to an in-body From: header as necessary.
* jk/format-patch-from:
teach format-patch to place other authors into in-body "From"
pretty.c: drop const-ness from pretty_print_context
"log --format=" did not honor i18n.logoutputencoding configuration
and this attempts to fix it.
* as/log-output-encoding-in-user-format:
t4205 (log-pretty-formats): avoid using `sed`
t6006 (rev-list-format): add tests for "%b" and "%s" for the case i18n.commitEncoding is not set
t4205, t6006, t7102: make functions better readable
t4205 (log-pretty-formats): revert back single quotes
t4041, t4205, t6006, t7102: use iso8859-1 rather than iso-8859-1
t4205: replace .\+ with ..* in sed commands
pretty: --format output should honor logOutputEncoding
pretty: Add failing tests: --format output should honor logOutputEncoding
t4205 (log-pretty-formats): don't hardcode SHA-1 in expected outputs
t7102 (reset): don't hardcode SHA-1 in expected outputs
t6006 (rev-list-format): don't hardcode SHA-1 in expected outputs
Format-patch generates emails with the "From" address set to the
author of each patch. If you are going to send the emails, however,
you would want to replace the author identity with yours (if they
are not the same), and bump the author identity to an in-body
header.
Normally this is handled by git-send-email, which does the
transformation before sending out the emails. However, some
workflows may not use send-email (e.g., imap-send, or a custom
script which feeds the mbox to a non-git MUA). They could each
implement this feature themselves, but getting it right is
non-trivial (one must canonicalize the identities by reversing any
RFC2047 encoding or RFC822 quoting of the headers, which has caused
many bugs in send-email over the years).
This patch takes a different approach: it teaches format-patch a
"--from" option which handles the ident check and in-body header
while it is writing out the email. It's much simpler to do at this
level (because we haven't done any quoting yet), and any workflow
based on format-patch can easily turn it on.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One can set an alias
$ git config [--global] alias.lg "log --graph --pretty=format:'%Cred%h%Creset
-%C(yellow)%d%Creset %s %Cgreen(%cd) %C(bold blue)<%an>%Creset'
--abbrev-commit --date=local"
to see the log as a pretty tree (like *gitk* but in a terminal).
However, log messages written in an encoding i18n.commitEncoding which differs
from terminal encoding are shown corrupted even when i18n.logOutputEncoding
and terminal encoding are the same (e.g. log messages committed on a Cygwin box
with Windows-1251 encoding seen on a Linux box with a UTF-8 encoding and vice versa).
To simplify an example we can say the following two commands are expected
to give the same output to a terminal:
$ git log --oneline --no-color
$ git log --pretty=format:'%h %s'
However, the former pays attention to i18n.logOutputEncoding
configuration, while the latter does not when it formats "%s".
The same corruption is true for
$ git diff --submodule=log
and
$ git rev-list --pretty=format:%s HEAD
and
$ git reset --hard
This patch makes pretty --format honor logOutputEncoding when it formats
log message.
Signed-off-by: Alexey Shumkin <Alex.Crezoff@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tr/line-log:
git-log(1): remove --full-line-diff description
line-log: fix documentation formatting
log -L: improve comments in process_all_files()
log -L: store the path instead of a diff_filespec
log -L: test merge of parallel modify/rename
t4211: pass -M to 'git log -M -L...' test
log -L: fix overlapping input ranges
log -L: check range set invariants when we look it up
Speed up log -L... -M
log -L: :pattern:file syntax to find by funcname
Implement line-history search (git log -L)
Export rewrite_parents() for 'log -L'
Refactor parse_loc
This also adds color support to format_decorations()
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Consolidate codepaths that inspect log-message-to-be and decide to
add a new Signed-off-by line in various commands.
* bc/append-signed-off-by:
git-commit: populate the edit buffer with 2 blank lines before s-o-b
Unify appending signoff in format-patch, commit and sequencer
format-patch: update append_signoff prototype
t4014: more tests about appending s-o-b lines
sequencer.c: teach append_signoff to avoid adding a duplicate newline
sequencer.c: teach append_signoff how to detect duplicate s-o-b
sequencer.c: always separate "(cherry picked from" from commit body
sequencer.c: require a conforming footer to be preceded by a blank line
sequencer.c: recognize "(cherry picked from ..." as part of s-o-b footer
t/t3511: add some tests of 'cherry-pick -s' functionality
t/test-lib-functions.sh: allow to specify the tag name to test_commit
commit, cherry-pick -s: remove broken support for multiline rfc2822 fields
sequencer.c: rework search for start of footer to improve clarity
This is a rewrite of much of Bo's work, mainly in an effort to split
it into smaller, easier to understand routines.
The algorithm is built around the struct range_set, which encodes a
series of line ranges as intervals [a,b). This is used in two
contexts:
* A set of lines we are tracking (which will change as we dig through
history).
* To encode diffs, as pairs of ranges.
The main routine is range_set_map_across_diff(). It processes the
diff between a commit C and some parent P. It determines which diff
hunks are relevant to the ranges tracked in C, and computes the new
ranges for P.
The algorithm is then simply to process history in topological order
from newest to oldest, computing ranges and (partial) diffs. At
branch points, we need to merge the ranges we are watching. We will
find that many commits do not affect the chosen ranges, and mark them
TREESAME (in addition to those already filtered by pathspec limiting).
Another pass of history simplification then gets rid of such commits.
This is wired as an extra filtering pass in the log machinery. This
currently only reduces code duplication, but should allow for other
simplifications and options to be used.
Finally, we hook a diff printer into the output chain. Ideally we
would wire directly into the diff logic, to optionally use features
like word diff. However, that will require some major reworking of
the diff chain, so we completely replace the output with our own diff
for now.
As this was a GSoC project, and has quite some history by now, many
people have helped. In no particular order, thanks go to
Jakub Narebski <jnareb@gmail.com>
Jens Lehmann <Jens.Lehmann@web.de>
Jonathan Nieder <jrnieder@gmail.com>
Junio C Hamano <gitster@pobox.com>
Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Will Palmer <wmpalmer@gmail.com>
Apologies to everyone I forgot.
Signed-off-by: Bo Yang <struggleyb.nku@gmail.com>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you run a log with diffs (such as -p, --raw, --stat etc.) the
current code ends up loading many objects twice. For example, for
'log -3000 -p' my instrumentation said the objects loaded more than
once are distributed as follows:
2008 blob
2103 commit
2678 tree
Fixing blobs and trees will be harder, because those are really used
within the diff engine and need some form of caching.
However, fixing the commits is easy at least at the band-aid level.
They are triggered by log_tree_diff() invoking diff_tree_sha1() on
commits, which duly loads the specified object to dereference it to a
tree. Since log_tree_diff() knows that it works with commits and they
must have trees, we can simply pass through the trees.
We add some parse_commit() calls. The ones for the parents are
required; we do not know at this stage if they have been looked at.
The one for the commit itself is pure paranoia, but has about the same
cost as an assertion on commit->object.parsed.
This has a quite dramatic effect on log --raw, though only a
negligible impact on log -p:
Test this tree HEAD
--------------------------------------------------------------------
4000.2: log --raw -3000 0.50(0.43+0.06) 0.54(0.46+0.06) +7.0%***
4000.3: log -p -3000 2.34(2.20+0.13) 2.37(2.22+0.13) +1.2%
--------------------------------------------------------------------
Significance hints: '.' 0.1 '*' 0.05 '**' 0.01 '***' 0.001
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Call "gpg" using the right API when validating the signature on
tags.
* mg/gpg-interface-using-status:
pretty: make %GK output the signing key for signed commits
pretty: parse the gpg status lines rather than the output
gpg_interface: allow to request status return
log-tree: rely upon the check in the gpg_interface
gpg-interface: check good signature in a reliable way
Currently, verify_signed_buffer() returns the user facing output only.
Allow callers to request the status output also.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are two implementations of append_signoff in log-tree.c and
sequencer.c, which do more or less the same thing. Unify on top of the
sequencer.c implementation.
Add a test in t4014 to demonstrate support for non-s-o-b elements in the
commit footer provided by sequence.c:append_sob. Mark tests fixed as
appropriate.
[Commit message mostly stolen from Nguyễn Thái Ngọc Duy's original
unification patch]
Signed-off-by: Brandon Casey <bcasey@nvidia.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a preparation step for merging with append_signoff from
sequencer.c
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Brandon Casey <bcasey@nvidia.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach commands in the "log" family to optionally pay attention to
the mailmap.
* ap/log-mailmap:
log --use-mailmap: optimize for cases without --author/--committer search
log: add log.mailmap configuration option
log: grep author/committer using mailmap
test: add test for --use-mailmap option
log: add --use-mailmap option
pretty: use mailmap to display username and email
mailmap: add mailmap structure to rev_info and pp
mailmap: simplify map_user() interface
mailmap: remove email copy and length limitation
Use split_ident_line to parse author and committer
string-list: allow case-insensitive string list
Teach "format-patch" to prefix v4- to its output files for the
fourth iteration of a patch series, to make it easier for the
submitter to keep separate copies for iterations.
* jc/format-patch-reroll:
format-patch: give --reroll-count a short synonym -v
format-patch: document and test --reroll-count
format-patch: add --reroll-count=$N option
get_patch_filename(): split into two functions
get_patch_filename(): drop "just-numbers" hack
get_patch_filename(): simplify function signature
builtin/log.c: stop using global patch_suffix
builtin/log.c: drop redundant "numbered_files" parameter from make_cover_letter()
builtin/log.c: drop unused "numbered" parameter from make_cover_letter()
Pass a mailmap from rev_info to pretty_print_context to so that the
pretty printer can use rewritten name and email address when showing
commits.
Signed-off-by: Antoine Pelisse <apelisse@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce "log --format=%C(auto,blue)Foo%C(auto,reset)" that does
not color its output when writing to a non-terminal.
* jc/format-color-auto:
log --format: teach %C(auto,black) to respect color config
t6006: clean up whitespace
The --reroll-count=$N option, when given a positive integer:
- Adds " v$N" to the subject prefix specified. As the default
subject prefix string is "PATCH", --reroll-count=2 makes it
"PATCH v2".
- Prefixes "v$N-" to the names used for output files. The cover
letter, whose name is usually 0000-cover-letter.patch, becomes
v2-0000-cover-letter.patch when given --reroll-count=2.
This allows users to use the same --output-directory for multiple
iterations of the same series, without letting the output for a
newer round overwrite output files from the earlier rounds. The
user can incorporate materials from earlier rounds to update the
newly minted iteration, and use "send-email v2-*.patch" to send out
the patches belonging to the second iteration easily.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function switched between two operating modes depending on the
NULL-ness of its two parameters, as a hacky way to share small part
of implementation, sacrificing cleanliness of the API.
Implement "fmt_output_subject()" function that takes a subject
string and gives the name for the output file, and on top of it,
implement "fmt_output_commit()" function that takes a commit and
gives the name for the output file.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function chooses from three operating modes (format using the
subject, the commit, or just number) based on NULL-ness of two of
its parameters, which is an ugly hack for sharing only a bit of
code.
Separate out the "just numbers" part out to the callers.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most functions that emit to a strbuf take the strbuf as their first
parameter; make this function follow suit.
The serial number of the patch being emitted (nr) and suffix used
for patch filename (suffix) are both recorded in rev_info; drop
these separate parameters and pass the rev_info directly.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Traditionally, %C(color attr) always emitted the ANSI color
sequence; it was up to the scripts that wanted to conditionally
color their output to omit %C(...) specifier when they do not want
colors.
Optionally allow "auto," to be prefixed to the color, so that the
output is colored iff we would color regular "log" output
(e.g., taking into account color.* and --color command line
options).
Tests and pretty_context bits by Jeff King <peff@peff.net>.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The last line of the note text comes immediately before the diffstat
block, making the latter unnecessarily harder to view.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When inserting the note after the commit log message to format-patch
output, add three dashes before the note. Record the fact that we
did so in the rev_info and omit showing duplicated three dashes in
the usual codepath that is used when notes are not being shown.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When appending a new signature with "format-patch --signature", if
the "--notes" option is also in effect, the location of the new
signature (and if the signature should be added in the first place)
should be decided using the contents of the original commit log
message, before the message from the notes is added.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The only case pretty_print_commit() appends notes message to the log
message taken from the commit is when show_log() calls it with the
notes_message field set, and the output format is not the userformat
(i.e. when substituting "%N"). No other users of this function sets
this field in the pretty_print_context, as can be easily verified in
the previous step.
Hoist the code to append the notes message to the caller.
Up to this point, no functionality change is intended.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of passing a boolean show_notes around, pass an optional
string that is to be inserted after the log message proper is shown.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The get_patch_filename function expects a commit argument
and uses it to get the sanitized subject line when making a
patch filename. However, we also want to use this same
function for the cover letter, which does not have a commit
object. The current solution is to create a fake commit with
the subject "cover letter". Instead, let's make the
get_patch_filename interface more flexibile, and allow
passing a direct subject.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gives a better DWIM behaviour for --pretty=format:%gd, "stash list", and
"log -g", depending on how the starting point ("master" vs "master@{0}" vs
"master@{now}") and date formatting options (e.g. "--date=iso") are given
on the command line.
By Jeff King (4) and Junio C Hamano (1)
* jk/maint-reflog-walk-count-vs-time:
reflog-walk: tell explicit --date=default from not having --date at all
reflog-walk: always make HEAD@{0} show indexed selectors
reflog-walk: clean up "flag" field of commit_reflog struct
log: respect date_mode_explicit with --format:%gd
t1411: add more selector index/date tests
Introduction of opt->date_mode_explicit was a step in the right direction,
but lost that crucial bit at the very end of the callchain, and the callee
could not tell an explicitly specified "I want *date* but in default format"
from the built-in default value passed when there was no --date specified.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"log -z --pretty=tformat:..." does not terminate each record with NUL
and this is a beginning of an attempt to fix it. It still is not right
but the patch does not make externally observable behaviour worse.
By Jan Krüger (1) and Junio C Hamano (1)
* jk/maint-tformat-with-z:
log-tree: the previous one is still not quite right
log-tree: use custom line terminator in line termination mode
When we show a reflog selector (e.g., via "git log -g"), we
perform some DWIM magic: while we normally show the entry's
index (e.g., HEAD@{1}), if the user has given us a date
with "--date", then we show a date-based select (e.g.,
HEAD@{yesterday}).
However, we don't want to trigger this magic if the
alternate date format we got was from the "log.date"
configuration; that is not sufficiently strong context for
us to invoke this particular magic. To fix this, commit
f4ea32f (improve reflog date/number heuristic, 2009-09-24)
introduced a "date_mode_explicit" flag in rev_info. This
flag is set only when we see a "--date" option on the
command line, and we a vanilla date to the reflog code if
the date was not explicit.
Later, commit 8f8f547 (Introduce new pretty formats %g[sdD]
for reflog information, 2009-10-19) added another way to
show selectors, and it did not respect the date_mode_explicit
flag from f4ea32f.
This patch propagates the date_mode_explicit flag to the
pretty-print code, which can then use it to pass the
appropriate date field to the reflog code. This brings the
behavior of "%gd" in line with the other formats, and means
that its output is independent of any user configuration.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using a custom format in line termination mode (as opposed to line
separation mode), the configured line terminator is not used, so things
like "git log --pretty=tformat:%H -z" do not work properly.
Make it use the line terminator the user ordered.
Signed-off-by: Jan Krüger <jk@jk.gs>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"log -p --graph" used with "--stat" had a few formatting error.
By Lucian Poston
* lp/maint-diff-three-dash-with-graph:
t4202: add test for "log --graph --stat -p" separator lines
log --graph: fix break in graph lines
log --graph --stat: three-dash separator should come after graph lines
Output from "git log --graph --stat -p" emits the three-dash separator
line before the graph that shows ancestry lines. The separator should
come after the ancestry lines just like all the other output.
Signed-off-by: Lucian Poston <lucian.poston@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The reason why the trailing slash is needed is obvious. refs/stash and
HEAD are not namespace, but complete refs. Do full string compare on them.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/show-sig:
log --show-signature: reword the common two-head merge case
log-tree: show mergetag in log --show-signature output
log-tree.c: small refactor in show_signature()
commit --amend -S: strip existing gpgsig headers
verify_signed_buffer: fix stale comment
gpg-interface: allow use of a custom GPG binary
pretty: %G[?GS] placeholders
test "commit -S" and "log --show-signature"
log: --show-signature
commit: teach --gpg-sign option
Conflicts:
builtin/commit-tree.c
builtin/commit.c
builtin/merge.c
notes-cache.c
pretty.c
While identifying the commit merged to our history as "parent #2" is
technically correct, we will never say "parent #1" (as that is the tip of
our history before the merge is made), and we rarely would say "parent #3"
(which would mean the merge is an octopus), especially when responding to
a request to pull a signed tag.
Treat the most common case to merge a single commit specially, and just
say "merged tag '<tagname>'" instead.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A commit object that merges a signed tag records the "mergetag" extended
header. Check the validity of the GPG signature on it, and show it in a
way similar to how "gpgsig" extended header is shown.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The next patch needs to show the result of signature verification on a
mergetag extended header in a way similar to how embedded signature for
the commit object itself is shown. Separate out the logic to go through
the message lines and show them in the "error" color (highlighted) or the
"correct" color (dim).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of passing the hash of a commit and then searching that
same commit in the single caller, simply pass the commit directly.
Signed-off-by: René Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This teaches the "log" family of commands to pass the GPG signature in the
commit objects to "gpg --verify" via the verify_signed_buffer() interface
used to verify signed tag objects. E.g.
$ git show --show-signature -s HEAD
shows GPG output in the header part of the output.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach git-log to support --children, which was added by f35f5603f4
to the revision machinery, and by 72276a3ecb to rev-list, but
was never added to git-log.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* nd/decorate-grafts:
log: Do not decorate replacements with --no-replace-objects
log: decorate "replaced" on to replaced commits
log: decorate grafted commits with "grafted"
Move write_shallow_commits to fetch-pack.c
Add for_each_commit_graft() to iterate all grafts
decoration: do not mis-decorate refs with same prefix
5267d29 (log: decorate "replaced" on to replaced commits, 2011-08-19)
introduced textual decorations for replaced commits, based on the
detection of refs/replace.
Make it so that additionally the use of --no-replace-objects is
detected: I.e. replaced commits are only decorated as replaced when they
are actually replaced.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we read a color value either from a config file or from
the command line, we use git_config_colorbool to convert it
from the tristate always/never/auto into a single yes/no
boolean value.
This has some timing implications with respect to starting
a pager.
If we start (or decide not to start) the pager before
checking the colorbool, everything is fine. Either isatty(1)
will give us the right information, or we will properly
check for pager_in_use().
However, if we decide to start a pager after we have checked
the colorbool, things are not so simple. If stdout is a tty,
then we will have already decided to use color. However, the
user may also have configured color.pager not to use color
with the pager. In this case, we need to actually turn off
color. Unfortunately, the pager code has no idea which color
variables were turned on (and there are many of them
throughout the code, and they may even have been manipulated
after the colorbool selection by something like "--color" on
the command line).
This bug can be seen any time a pager is started after
config and command line options are checked. This has
affected "git diff" since 89d07f7 (diff: don't run pager if
user asked for a diff style exit code, 2007-08-12). It has
also affect the log family since 1fda91b (Fix 'git log'
early pager startup error case, 2010-08-24).
This patch splits the notion of parsing a colorbool and
actually checking the configuration. The "use_color"
variables now have an additional possible value,
GIT_COLOR_AUTO. Users of the variable should use the new
"want_color()" wrapper, which will lazily determine and
cache the auto-color decision.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Old code also decorates "new" commits with "refs/replace/SHA1". This
is now gone, but I guess no one will miss it.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This lets us store more than just a bit flag for whether we
want color; we can also store whether we want automatic
colors. This can be useful for making the automatic-color
decision closer to the point of use.
This mostly just involves replacing DIFF_OPT_* calls with
manipulations of the flag. The biggest exception is that
calls to DIFF_OPT_TST must check for "o->use_color > 0",
which lets an "unknown" value (i.e., the default) stay at
"no color". In the previous code, a value of "-1" was not
propagated at all.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In shallow repositories, this may help detect whether a branch ends,
or it is deeper than current depth.
It also show graft points that extend a branch.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We definitely do not want to decorate refs/headsandtails the same as
refs/heads/*, for example.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/format-patch-am:
format-patch: preserve subject newlines with -k
clean up calling conventions for pretty.c functions
pretty: add pp_commit_easy function for simple callers
mailinfo: always clean up rfc822 header folding
t: test subject handling in format-patch / am pipeline
Conflicts:
builtin/branch.c
builtin/log.c
commit.h
If you give a zero-length subject prefix to format-patch
(e.g., "format-patch --subject-prefix="), we will print the
ugly:
Subject: [ 1/2] your subject here
because we always insert a space between the prefix and
numbering. Requiring the user to provide the space in their
prefix would be more flexible, but would break existing
usage. This patch provides a DWIM and suppresses the space
for zero-length prefixes, under the assumption that nobody
actually wants "[ 1/2]".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In older versions of git, we used rfc822 header folding to
indicate that the original subject line had multiple lines
in it. But since a1f6baa (format-patch: wrap long header
lines, 2011-02-23), we now use header folding whenever there
is a long line.
This means that "git am" cannot trust header folding as a
sign from format-patch that newlines should be preserved.
Instead, format-patch needs to signal more explicitly that
the newlines are significant. This patch does so by
rfc2047-encoding the newlines in the subject line. No
changes are needed on the "git am" end; it already decodes
the newlines properly.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have a pretty_print_context representing the parameters
for a pretty-print session, but we did not use it uniformly.
As a result, functions kept growing more and more arguments.
Let's clean this up in a few ways:
1. All pretty-print pp_* functions now take a context.
This lets us reduce the number of arguments to these
functions, since we were just passing around the
context values separately.
2. The context argument now has a cmit_fmt field, which
was passed around separately. That's one less argument
per function.
3. The context argument always comes first, which makes
calling a little more uniform.
This drops lines from some callers, and adds lines in a few
places (because we need an extra line to set the context's
fmt field). Overall, we don't save many lines, but the lines
that are there are a lot simpler and more readable.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, commit marks (left, right, boundary, cherry) are output right
before the commit sha1, which makes it difficult to copy sha1s. Sample
output for "git log --oneline --cherry":
=049c269 t6007: test rev-list --cherry
Change this to
= 049c269 t6007: test rev-list --cherry
which matches exactly the current output of "git log --graph".
Leave "git rev-list" output as is (no space) so that they do not break.
Adjust "git-svn" which uses "git log --pretty=raw --boundary".
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, we have identical code for generating revision marks ('<',
'>', '-') in 5 places.
Factor out the code to a single function get_revision_mark() for easier
maintenance and extensibility.
Note that the check for !!revs in graph.c (which gets removed
effectively by this patch) is superfluous.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes the decorations stand out more and easier to distinguish
and spot because they are colored differently depending on their type.
Signed-off-by: Nazri Ramliy <ayiehere@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "tag: " prefix is no longer prepended to the name of the decoration.
It is now printed conditionally by show_decorations if the decoration
type is DECORATION_REF_TAG.
Signed-off-by: Nazri Ramliy <ayiehere@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is an empty line between the commit message and the diff
output. Add the graph columns as prefix of this line.
Signed-off-by: Bo Yang <struggleyb.nku@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git log -p -m is used to show one merge entry per parent, with an
appropriate diff; this can be useful when examining histories where
full set of changes introduced by a merged branch is interesting, not
only the conflicts.
This patch properly documents the -m switch, which has so far been
mentioned only as a fairly special diff-tree flag.
It also makes the code show full patch entry only for the first parent
when --first-parent is used. Thus:
git log -p -m --first-parent
will show the history from the "main branch perspective", while also
including full diff of changes introduced by other merged in branches.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Giving "Notes" information in the default output format of "log" and
"show" is a sensible progress (the user has asked for it by having the
notes), but for some commands (e.g. "format-patch") spewing notes into the
formatted commit log message without being asked is too aggressive.
Enable notes output only for "log", "show", "whatchanged" by default and
only when the user didn't ask any specific --pretty/--format from the
command line; users can explicitly override this default with --show-notes
and --no-notes option.
Parts of tests are taken from Jeff King's fix.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add three new --pretty=format escapes:
%gD long reflog descriptor (e.g. refs/stash@{0})
%gd short reflog descriptor (e.g. stash@{0})
%gs reflog message
This is achieved by passing down the reflog info, if any, inside the
pretty_print_context struct.
We use the newly refactored get_reflog_selector(), and give it some
extra functionality to extract a shortened ref. The shortening is
cached inside the commit_reflogs struct; the only allocation of it
happens in read_complete_reflog(), where it is initialised to 0. Also
add another helper get_reflog_message() for the message extraction.
Note that the --format="%h %gD: %gs" tests may not work in real
repositories, as the --pretty formatter doesn't know to leave away the
": " on the last commit in an incomplete (because git-gc removed the
old part) reflog. This equivalence is nevertheless the main goal of
this patch.
Thanks to Jeff King for reviews, the %gd testcase and documentation.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
pretty_print_commit() has a bunch of rarely-used arguments, and
introducing more of them requires yet another update of all the call
sites. Refactor most of them into a struct to make future extensions
easier.
The ones that stay "plain" arguments were chosen on the grounds that
all callers put real arguments there, whereas some callers have 0/NULL
for all arguments that were factored into the struct.
We declare the struct 'const' to ensure none of the callers are bitten
by the changed (no longer call-by-value) semantics.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git log --graph --oneline --decorate --all' is a useful way to get a
general overview of the repository state, similar to 'gitk --all'.
Let it indicate the position of HEAD by loading that ref too, so that
the --decorate code can see it.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
