The commands in `git log` family take %C(auto) in a custom format
string. This unconditionally turned the color on, ignoring
--no-color or with --color=auto when the output is not connected to
a tty; this was corrected to make the format truly behave as
"auto".
* et/pretty-format-c-auto:
format_commit_message: honor `color=auto` for `%C(auto)`
When "git daemon" is run without --[init-]timeout specified, a
connection from a client that silently goes offline can hang around
for a long time, wasting resources. The socket-level KEEPALIVE has
been enabled to allow the OS to notice such failed connections.
* ew/daemon-socket-keepalive:
daemon: enable SO_KEEPALIVE for all sockets
write(2) can hit the same EAGAIN/EWOULDBLOCK errors as read(2),
so busy-looping on a non-blocking FD is a waste of resources.
Currently, I do not know of a way for this happen:
* the NonBlocking directive in systemd does not apply to stdin,
stdout, or stderr.
* xinetd provides no way to set the non-blocking flag at all
But theoretically, it's possible a careless C10K HTTP server
could use pipe2(..., O_NONBLOCK) to setup a pipe for
git-http-backend with only the intent to use non-blocking reads;
but accidentally leave non-blocking set on the write end passed
as stdout to git-upload-pack.
Followup-to: 1079c4be0b ("xread: poll on non blocking fds")
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We should continue to loop after EAGAIN/EWOULDBLOCK as the
intent of xread is to try until there is available data,
EOF, or an unrecoverable error.
Fixes: 1079c4be0b ("xread: poll on non blocking fds")
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This matches the documentation and allows gc.autoPackLimit=1
to maintain a single pack without attempting a repack on every
"git gc --auto" invocation.
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we detect the pattern is just a literal string, we avoid heavy
regex engine and use fast substring search implemented in kwsset.c.
But kws uses git-ctype which is locale-independent so it does not know
how to fold case properly outside ascii range. Let regcomp or pcre
take care of this case instead. Slower, but accurate.
Noticed-by: Plamen Totev <plamen.totev@abv.bg>
Helped-by: René Scharfe <l.s.r@web.de>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is in preparation to turn test-regex into some generic regex
testing command.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It has always been command-list.txt even at the time this
new-command.txt document is added.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test script t4202-log.sh is already pretty long, and it is a good
idea to test --output with a more obscure option, anyway. So let's
test it in conjunction with line-log.
The most important part of this test, of course, is to ensure that the
file is not closed after writing the diff, but only at the very end
of the log output. That is the entire reason why the test tries to
generate a log that covers more than one commit.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Thanks to the diff option parsing, we already know about this option.
We just have to make use of it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier, we freopen()ed stdout in order to write patches to files.
That forced us to duplicate stdout (naming it "realstdout") because we
*still* wanted to be able to report the file names.
As we do not abuse stdout that way anymore, we no longer need to
duplicate stdout, either.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We just taught the relevant functions to respect the diffopt.file field,
to allow writing somewhere else than stdout. Let's make use of it.
Technically, we do not need to avoid that call in a builtin: we assume
that builtins (as opposed to library functions) are stand-alone programs
that may do with their (global) state. Yet, we want to be able to reuse
that code in properly lib-ified code, e.g. when converting scripts into
builtins.
Further, while we did not *have* to touch the cmd_show() and cmd_cherry()
code paths (because they do not want to write anywhere but stdout as of
yet), it just makes sense to be consistent, making it easier and safer to
move the code later.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --color=auto handling is done by seeing if file descriptor 1
(the standard output) is connected to a terminal. format-patch
used freopen() to reuse the standard output stream even when sending
its output to an on-disk file, and this check is appropriate.
In the next step, however, we will stop reusing "FILE *stdout", and
instead start using arbitrary file descriptor obtained by doing an
fopen(3) ourselves. The check --color=auto does will become useless,
as we no longer are writing to the standard output stream.
But then, we do not need to guess to begin with. As argued in the commit
message of 7787570c (format-patch: ignore ui.color, 2011-09-13), we do not
allow the ui.color setting to affect format-patch's output. The only time,
therefore, that we allow color sequences to be written to the output files
is when the user specified the --color=always command-line option explicitly.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This will be needed to avoid freopen() in `git format-patch`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the caller overrides diffopt.file (which defaults to stdout),
the diff machinery already redirects its output, and the graph display
should also write to that file.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The diff machinery can optionally output to a file stream other than
stdout, by overriding diffopt.file. In such a case, the rest of the
log tree machinery should also write to that stream.
Currently, there is no user of the line level log that wants to
redirect output to a file. Therefore, one might argue that it is
superfluous to support that now. However, it is better to be
consistent now, rather than to face hard-to-debug problems later.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The diff options already know how to print the output anywhere else
than stdout. The same is needed for log output in general, e.g.
when writing patches to files in `git format-patch`. Let's allow
users to use log_tree_commit() *without* changing global state via
freopen().
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We are about to teach the log-tree machinery to reuse the diffopt.file
field to output to a file stream other than stdout, in line with the
diff machinery already writing to diffopt.file.
However, we might want to write something after the diff in
log_tree_commit() (e.g. with the --show-linear-break option), therefore
we must not let the diff machinery close the file (as per
diffopt.close_file.
This means that log_tree_commit() itself must override the
diffopt.close_file flag and close the file, and if log_tree_commit() is
called in a loop, the caller is responsible to do the same.
Note: format-patch has an `--output-directory` option. Due to the fact
that format-patch's options are parsed first, and that the parse-options
machinery accepts uniquely abbreviated options, the diff options
`--output` (and `-o`) are shadowed. Therefore close_file is not set to 1
so that cmd_format_patch() does *not* need to handle the close_file flag
differently, even if it calls log_tree_commit() in a loop.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Users may want to always use "--show-signature" while using git-log and
related commands.
When log.showSignature is set to true, git-log and related commands will
behave as if "--show-signature" was given to them.
Note that this config variable is meant to affect git-log, git-show,
git-whatchanged and git-reflog. Other commands like git-format-patch,
git-rev-list are not to be affected by this config variable.
Signed-off-by: Mehul Jain <mehul.jain2029@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If an user creates an alias with "--show-signature" early in command
line, e.g.
[alias] logss = log --show-signature
then there is no way to countermand it through command line.
Teach git-log and related commands about "--no-show-signature" command
line option. This will make "git logss --no-show-signature" run
without showing GPG signature.
Signed-off-by: Mehul Jain <mehul.jain2029@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Subsequent patches will want to reuse the 'signed' branch that the
'log --graph --show-signature' test creates and uses.
Split the set-up part into a test of its own, and make the existing
test into a separate one that only inspects the history on the 'signed'
branch. This way, it becomes clearer that tests added by subsequent
patches reuse the 'signed' branch in the same way.
Signed-off-by: Mehul Jain <mehul.jain2029@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is the only remaining attribute that is commonly
supported (at least by xterm) that we don't support. Let's
add it for completeness.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already support bold, underline, and similar attributes.
Let's add italic to the mix. According to the Wikipedia
page on ANSI colors, this attribute is "not widely
supported", but it does seem to work on my xterm.
We don't have to bump the maximum color size because we were
already over-allocating it (but we do adjust the comment
appropriately).
Requested-by: Simon Courtois <scourtois@cubyx.fr>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using "no-bold" rather than "nobold" is easier to read and
more natural to type (to me, anyway, even though I was the
person who introduced "nobold" in the first place). It's
easy to allow both.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The list of attributes we recognize is a bit unwieldy, as we
actually have two arrays that must be kept in sync. Instead,
let's have a single array-of-struct to represent our
mapping. That means we can never have an accident that
causes us to read off the end of an array, and it makes
diffs for adding new attributes much easier to read.
This also makes it easy to handle the "no" cases without
having to repeat each attribute (this shortens the list,
making it easier to read, but also also cuts the size of our
linear search in half). Technically this makes it impossible
for us to add an attribute that starts with "no" (we could
confuse "nobody" for the negation of "body"), but since this
is a constrained set of attributes, that's OK.
Since we can also store the length of each name in the
struct, that makes it easy for us to avoid reading past the
"len" parameter given to us (though in practice it was not a
bug, since all of our current callers are interested in a
subset of a NUL-terminated buffer, not a true undelimited
range of memory).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The skip_prefix function has been very useful for
simplifying pointer arithmetic and avoiding repeated magic
numbers, but we have no equivalent for length-limited
buffers. So we're stuck with:
if (3 <= len && skip_prefix(buf, "foo", &buf))
len -= 3;
That's not that complicated, but it needs to use magic
numbers for the length of the prefix (or else write out
strlen("foo"), repeating the string). By using a helper, we
can get the string length behind the scenes (and often at
compile time for string literals).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a general cleanup of the description of colors in
git-config, mostly to address inaccuracies and confusion
that had grown over time:
- you can have many attributes, not just one
- the discussion flip-flopped between colors and
attributes; now we discuss everything about colors, then
everything about attributes
- many concepts were lumped into the first paragraph,
making it hard to read, and especially to find the
actual lists of colors and attributes. I stopped short
of breaking those out into their own lists, as it seemed
like an excessive use of vertical screen real estate.
- we introduced negated attributes, but then the next
paragraph basically explains how each item starts off
with no attributes. So why would one need negated
attributes? We now explain.
- minor typo, language, and typography fixes
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We use fixed-size buffers for colors, because we know our
parsing cannot grow beyond a particular bound. However, our
comment description has two issues:
1. It has the description in two forms: a short one, and
one with more explanation. Over time the latter has
been updated, but the former has not. Let's just drop
the short one (after making sure everything it says
is in the long one).
2. As of ff40d18 (parse_color: recognize "no$foo" to clear
the $foo attribute, 2014-11-20), the per-attribute size
bumped to "3" (because "nobold" is actually "21;"). But
that's not quite enough, as somebody may use both
"bold" and "nobold", requiring 5 characters.
This wasn't a problem for the final count, because we
over-estimated in other ways, but let's clarify how we
got to the final number.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For repositories without parent following enabled, finding
git parents through svn:mergeinfo or svk::parents can be
expensive and pointless.
Reported-by: Александр Овчинников <proff@proff.email>
http://mid.gmane.org/4094761466408188@web24o.yandex.ru
Signed-off-by: Eric Wong <e@80x24.org>
The "git" command prepends the exec-path to the PATH environment
variable for processes it spawns. That is how ". git-sh-setup" in
our scripted Porcelains can find the dot-sourced file in the
exec-path location that is not usually on user's PATH.
When t2300 runs, because it is not spawned by the "git" command, the
scriptlet being tested did not run with a realistic setting of PATH
environment. It lacked the exec-path on the PATH, and failed to
find the dot-sourced file. A recent update to t2300 attempted to
fix this, with "PATH=$(git --exec-path):$PATH", which has been the
recommended way around v1.6.0 days (a script whose original was
written before that release that survives to this day is likely to
have such a line).
However, the "git --exec-path" command outputs C:\path\to\exec\dir
(not /c/path/to/exec/dir) on Windows; the recent update failed to
consider the problem that comes from it.
Even though Git itself, when doing the equivalent internally, does
so in a platform native way (i.e. on Windows, C:\path\to\exec\dir is
prepended to the existing value of %PATH% using ';' as a component
separator), the result is further massaged by bash and gets turned
into $PATH that uses /c/path/to/exec/dir with ':' separating the
components, which is the form understood by bash, so scripted
Porcelains find commands from PATH correctly.
An end user script written in shell, however, cannot prepend
"C:\path\to\exec\dir:" to the existing value of $PATH and expect
bash to magically turn it into the form it understands. In other
words, "PATH=$(git --exec-path):$PATH" does not work as an emulation
of what "Git" internally does to the PATH on Windows.
To correctly emulate how exec-path is prepended to the PATH
environment internally on Windows, we'd need to convert
C:\git-sdk-64\usr\src\git to at least /c\git-sdk-64\usr\src\git
ourselves before prepending it to PATH.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
p4211 tests line-log performance both with and without "-M".
In v2.9.0, the case without "-M" appears to have regressed
badly, but that is only because we flipped on renames by
default.
Let's have the test explicitly disable renames to get
consistent timings (and to match the presumed intent of the
test, which is to see the effects with and without renames).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 7501b59 (perf: make the tests work in worktrees,
2016-05-13) introduced the use of "git rev-parse --git-path"
in the perf-lib setup code. Because the to-be-tested version
of git is at the front of the $PATH when this code runs,
this means we cannot use modern versions of t/perf to test
versions of git older than v2.5.0 (when that option was
introduced).
This is a symptom of a more general problem. The t/perf
suite is essentially independent of git versions, and
ideally we would be able to run the most modern and complete
set of tests across many historical versions (to see how
they compare). But any setup code they run is therefore
required to use the lowest common denominator we expect to
test.
So let's introduce a new variable, $MODERN_GIT, that we can
use both in perf-lib and in the test setup to get a reliable
set of git features (we might change git and break some
tests, of course, but $MODERN_GIT is tied to the same
version of git as the t/perf scripts, so they can be fixed
or adjusted together).
This commit fixes the "--git-path" case, but does not
mass-convert existing setup code to use $MODERN_GIT. Most
setup code is fairly vanilla and will work with effectively
all versions. But now the tool is there to fix any other
issues we find going forward.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Just like the pretty printing machinery, we should simply ignore
blank lines at the beginning of the commit messages.
This discrepancy was noticed when an early version of the
rebase--helper produced commit objects with more than one empty line
between the header and the commit message.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function will be used also in the find_commit_subject()
function.
While at it, rename the function to reflect that it skips not only
empty lines, but any lines consisting of only whitespace, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
http://git-htmldocs.googlecode.com/git/git.html says
There was no service found for the uri requested.
Link to the rendered documentation on Jekyll instead.
Reported-by: Andrea Stacchiotti <andreastacchiotti@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The logic here was inverted, you got a message saying the file is
ignored for each file that is not ignored.
Signed-off-by: Andrew Oakley <aoakley@roku.com>
Acked-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using a subshell for just one git command is both a waste in compute
overhead (create a new process) as well as in line count.
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The readlink(1) command is not available on all platforms (notably
not on AIX and HP-UX) and can be replaced in this test with the
"workaround"
ls -ld <name> | sed -e 's/.* -> //'
This is no universal readlink replacement but works in the
controlled test environment well enough.
Signed-off-by: Armin Kunaschik <megabreit@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As this developer has no access to MacOSX developer setups anymore,
Travis becomes the best bet to run performance tests on that OS.
However, on MacOSX /usr/bin/time is that good old BSD executable that
no Linux user cares about, as demonstrated by the perf-lib.sh's use
of GNU-ish extensions. And by the hard-coded path.
Let's just work around this issue by using gtime on MacOSX, the
Homebrew-provided GNU implementation onto which pretty much every
MacOSX power user falls back anyway.
To help other developers use Travis to run performance tests on
MacOSX, the .travis.yml file now sports a commented-out line that
installs GNU time via Homebrew.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we want to know the local timezone offset at a given
timestamp, we compute it by asking for localtime() at the
given time, and comparing the offset to GMT at that time.
However, there's some juggling between time_t and "struct
tm" which happens, which involves calling our own
tm_to_time_t().
If that function returns an error (e.g., because it only
handles dates up to the year 2099), it returns "-1", which
we treat as a time_t, and is clearly bogus, leading to
bizarre timestamps (that seem to always adjust the time back
to (time_t)(uint32_t)-1, in the year 2106).
It's not a good idea for local_tzoffset() to simply die
here; it would make it hard to run "git log" on a repository
with funny timestamps. Instead, let's just treat such cases
as "zero offset".
Reported-by: Norbert Kiesel <nkiesel@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We ended up testing some of these date formats throughout
the rest of the suite (e.g., via for-each-ref's
"$(authordate:...)" format), but we never did so
systematically. t0006 is the right place for unit-testing of
our date-handling code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "show" tests are really only checking relative formats;
we should make that more clear.
This also frees up the "show" name to later check other
formats. We could later fold "relative" into a more generic
"show" command, but it's not worth it. Relative times are a
special case already because we have to munge the concept of
"now" in our tests.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The recently introduced developer flags identified a couple of
old-style function declarations in the Windows-specific code where
the parameter list was left empty instead of specifying "void"
explicitly. Let's just fix them.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we're overwriting a symref with a SHA-1, we need to resolve the value
of the symref (1) to check against update->old_sha1 and (2) to write to
its reflog. However, we've already read the symref itself and know its
referent. So there is no need to read the symref's value through the
symref; we can read the referent directly.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To aid the effort, extract a new function, check_old_oid(), and use it
in the two places where the read value of the reference has to be
checked against update->old_sha1.
Update tests to reflect the improvements.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some of the error messages will be improved in subsequent commits.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
