Now that most of the logic for our local get_upstream_branch
has been pushed into the generic branch_get_upstream, we can
fold the remainder into interpret_upstream_mark.
Furthermore, what remains is generic to any branch-related
"@{foo}" we might add in the future, and there's enough
boilerplate that we'd like to reuse it. Let's parameterize
the two operations (parsing the mark and computing its
value) so that we can reuse this for "@{push}" in the near
future.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We will be adding new mark types in the future, so separate
the suffix data from the logic.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a triangular workflow, the place you pull from and the
place you push to may be different. As we have
branch_get_upstream for the former, this patch adds
branch_get_push for the latter (and as the former implements
@{upstream}, so will this implement @{push} in a future
patch).
Note that the memory-handling for the return value bears
some explanation. Some code paths require allocating a new
string, and some let us return an existing string. We should
provide a consistent interface to the caller, so it knows
whether to free the result or not.
We could do so by xstrdup-ing any existing strings, and
having the caller always free. But that makes us
inconsistent with branch_get_upstream, so we would prefer to
simply take ownership of the resulting string. We do so by
storing it inside the "struct branch", just as we do with
the upstream refname (in that case we compute it when the
branch is created, but there's no reason not to just fill
it in lazily in this case).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After calling stat_tracking_info, callers often want to
print the name of the upstream branch (in addition to the
tracking count). To do this, they have to access
branch->merge->dst[0] themselves. This is not wrong, as the
return value from stat_tracking_info tells us whether we
have an upstream branch or not. But it is a bit leaky, as we
make an assumption about how it calculated the upstream
name.
Instead, let's add an out-parameter that lets the caller
know the upstream name we found.
As a bonus, we can get rid of the unusual tri-state return
from the function. We no longer need to use it to
differentiate between "no tracking config" and "tracking ref
does not exist" (since you can check the upstream_name for
that), so we can just use the usual 0/-1 convention for
success/error.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The error-diagnosis logic in branch_get_upstream was copied
straight from sha1_name.c in the previous commit. However,
because we check all error cases and upfront and then later
diagnose them, the logic is a bit tangled. In particular:
- if branch->merge[0] is NULL, we may end up dereferencing
it for an error message (in practice, it should never be
NULL, so this is probably not a triggerable bug).
- We may enter the code path because branch->merge[0]->dst
is NULL, but we then start our error diagnosis by
checking whether our local branch exists. But that is
only relevant to diagnosing missing merge config, not a
missing tracking ref; our diagnosis may hide the real
problem.
Instead, let's just use a sequence of "if" blocks to check
for each error type, diagnose it, and return NULL.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit f86a374 (pack-bitmap.c: fix a memleak, 2015-03-30)
noticed that we leak the "result" bitmap. But we should use
"bitmap_free" rather than straight "free", as the former
remembers to free the bitmap array pointed to by the struct.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix remaining instances where "pack-file" is used instead of
"packfile". Some places remain where we still use "pack-file",
This is the case when we explicitly refer to a file with a
".pack" extension as opposed to a data source providing a pack
data stream.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Usually, when 'git rebase' stops before completing the rebase, it is to
give the user an opportunity to edit a commit (e.g. with the 'edit'
command). In such cases, 'git rebase' leaves the sha1 of the commit being
rewritten in "$state_dir"/stopped-sha, and subsequent 'git rebase
--continue' will call the post-rewrite hook with this sha1 as <old-sha1>
argument to the post-rewrite hook.
The case of 'git rebase' stopping because of a failed 'exec' command is
different: it gives the opportunity to the user to examine or fix the
failure, but does not stop saying "here's a commit to edit, use
--continue when you're done". So, there's no reason to call the
post-rewrite hook for 'exec' commands. If the user did rewrite the
commit, it would be with 'git commit --amend' which already called the
post-rewrite hook.
Fix the behavior to leave no stopped-sha file in case of failed exec
command, and teach 'git rebase --continue' to skip record_in_rewritten if
no stopped-sha file is found.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'exec' command is sending the current commit to stopped-sha, which is
supposed to contain the original commit (before rebase). As a result, if
an 'exec' command fails, the next 'git rebase --continue' will send the
current commit as <old-sha1> to the post-rewrite hook.
The test currently fails with :
--- expected.data 2015-05-21 17:55:29.000000000 +0000
+++ [...]post-rewrite.data 2015-05-21 17:55:29.000000000 +0000
@@ -1,2 +1,3 @@
2362ae8e1b1b865e6161e6f0e165ffb974abf018 488028e9fac0b598b70cbeb594258a917e3f6fab
+488028e9fac0b598b70cbeb594258a917e3f6fab 488028e9fac0b598b70cbeb594258a917e3f6fab
babc8a4c7470895886fc129f1a015c486d05a351 8edffcc4e69a4e696a1d4bab047df450caf99507
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most of the options in config.txt are camelCase. Improve the readability
for allowtipsha1inwant by changing to allowTipSHA1InWant.
Signed-off-by: Fredrik Medley <fredrik.medley@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git help' shows common commands in alphabetical order:
The most commonly used git commands are:
add Add file contents to the index
bisect Find by binary search the change that introduced a bug
branch List, create, or delete branches
checkout Checkout a branch or paths to the working tree
clone Clone a repository into a new directory
commit Record changes to the repository
[...]
without any indication of how commands relate to high-level
concepts or each other. Revise the output to explain their relationship
with the typical Git workflow:
These are common Git commands used in various situations:
start a working area (see also: git help tutorial)
clone Clone a repository into a new directory
init Create an empty Git repository or reinitialize [...]
work on the current change (see also: git help everyday)
add Add file contents to the index
reset Reset current HEAD to the specified state
examine the history and state (see also: git help revisions)
log Show commit logs
status Show the working tree status
[...]
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Sébastien Guimmara <sebastien.guimmara@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
command-list.sh, retired in the previous patch, was the only
consumer of the "common" tag, so drop this now-unnecessary
attribute.
before:
git-add mainporcelain common worktree
after:
git-add mainporcelain worktree
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Sébastien Guimmara <sebastien.guimmara@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Parse the group block to create the array of group descriptions:
static char *common_cmd_groups[] = {
N_("starting a working area"),
N_("working on the current change"),
N_("working with others"),
N_("examining the history and state"),
N_("growing, marking and tweaking your history"),
};
then map each element of common_cmds[] to a group via its index:
static struct cmdname_help common_cmds[] = {
{"add", N_("Add file contents to the index"), 1},
{"branch", N_("List, create, or delete branches"), 4},
{"checkout", N_("Checkout a branch or paths to the ..."), 4},
{"clone", N_("Clone a repository into a new directory"), 0},
{"commit", N_("Record changes to the repository"), 4},
...
};
so that 'git help' can print those commands grouped by theme.
Only commands tagged with an attribute from the group block are emitted to
common_cmds[].
[commit message by Sébastien Guimmara <sebastien.guimmara@gmail.com>]
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Sébastien Guimmara <sebastien.guimmara@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ultimate goal is for "git help" to display common commands in
groups rather than alphabetically. As a first step, define the
groups in a new block, and then assign a group to each
common command.
Add a block at the beginning of command-list.txt:
init start a working area (see also: git help tutorial)
worktree work on the current change (see also:[...]
info examine the history and state (see also: git [...]
history grow, mark and tweak your history
remote collaborate (see also: git help workflows)
storing information about common commands group, then map each common
command to a group:
git-add mainporcelain common worktree
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Emma Jane Hogbin Westby <emma.westby@gmail.com>
Signed-off-by: Sébastien Guimmara <sebastien.guimmara@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ultimate goal is for "git help" to classify common commands by
group. Toward this end, a subsequent patch will add a new "common
groups" section to command-list.txt preceding the actual command list.
As preparation, teach existing command-list.txt parsing machinery, which
doesn't care about grouping, to skip over this upcoming "common groups"
section.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Sébastien Guimmara <sebastien.guimmara@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the previous commit introduced the branch_get_upstream
helper, there was one call-site that could not be converted:
the one in sha1_name.c, which gives detailed error messages
for each possible failure.
Let's teach the helper to optionally report these specific
errors. This lets us convert another callsite, and means we
can use the helper in other locations that want to give the
same error messages.
The logic and error messages come straight from sha1_name.c,
with the exception that we start each error with a lowercase
letter, as is our usual style (note that a few tests need
updated as a result).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All of the information needed to find the @{upstream} of a
branch is included in the branch struct, but callers have to
navigate a series of possible-NULL values to get there.
Let's wrap that logic up in an easy-to-read helper.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before the previous commit, we had to make sure that
read_config() was called before entering remote_get_1,
because we needed to pass pushremote_name by value. But now
that we pass a function, we can let remote_get_1 handle
loading the config itself, turning our wrappers into true
one-liners.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When remote.c loads its config, it records the
branch.*.pushremote for the current branch along with the
global remote.pushDefault value, and then binds them into a
single value: the default push for the current branch. We
then pass this value (which may be NULL) to remote_get_1
when looking up a remote for push.
This has a few downsides:
1. It's confusing. The early-binding of the "current
value" led to bugs like the one fixed by 98b406f
(remote: handle pushremote config in any order,
2014-02-24). And the fact that pushremotes fall back to
ordinary remotes is not explicit at all; it happens
because remote_get_1 cannot tell the difference between
"we are not asking for the push remote" and "there is
no push remote configured".
2. It throws away intermediate data. After read_config()
finishes, we have no idea what the value of
remote.pushDefault was, because the string has been
overwritten by the current branch's
branch.*.pushremote.
3. It doesn't record other data. We don't note the
branch.*.pushremote value for anything but the current
branch.
Let's make this more like the fetch-remote config. We'll
record the pushremote for each branch, and then explicitly
compute the correct remote for the current branch at the
time of reading.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We'll want to use this logic as a fallback when looking up
the pushremote, so let's pull it out into its own function.
We don't technically need to make this available outside of
remote.c, but doing so will provide a consistent API with
pushremote_for_branch, which we will add later.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we create each branch struct, we fill in the
"remote_name" field from the config, and then fill in the
actual "remote" field (with a "struct remote") based on that
name. However, it turns out that nobody really cares about
the latter field. The only two sites that access it at all
are:
1. git-merge, which uses it to notice when the branch does
not have a remote defined. But we can easily replace this
with looking at remote_name instead.
2. remote.c itself, when setting up the @{upstream} merge
config. But we don't need to save the "remote" in the
"struct branch" for that; we can just look it up for
the duration of the operation.
So there is no need to have both fields; they are redundant
with each other (the struct remote contains the name, or you
can look up the struct from the name). It would be nice to
simplify this, especially as we are going to add matching
pushremote config in a future patch (and it would be nice to
keep them consistent).
So which one do we keep and which one do we get rid of?
If we had a lot of callers accessing the struct, it would be
more efficient to keep it (since you have to do a lookup to
go from the name to the struct, but not vice versa). But we
don't have a lot of callers; we have exactly one, so
efficiency doesn't matter. We can decide this based on
simplicity and readability.
And the meaning of the struct value is somewhat unclear. Is
it always the remote matching remote_name? If remote_name is
NULL (i.e., no per-branch config), does the struct fall back
to the "origin" remote, or is it also NULL? These questions
will get even more tricky with pushremotes, whose fallback
behavior is more complicated. So let's just store the name,
which pretty clearly represents the branch.*.remote config.
Any lookup or fallback behavior can then be implemented in
helper functions.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we call branch_get() to lookup or create a "struct
branch", we make sure the "merge" field is filled in so that
callers can access it. But the conditions under which we do
so are a little confusing, and can lead to two funny
situations:
1. If there's no branch.*.remote config, we cannot provide
branch->merge (because it is really just an application
of branch.*.merge to our remote's refspecs). But
branch->merge_nr may be non-zero, leading callers to be
believe they can access branch->merge (e.g., in
branch_merge_matches and elsewhere).
It doesn't look like this can cause a segfault in
practice, as most code paths dealing with merge config
will bail early if there is no remote defined. But it's
a bit of a dangerous construct.
We can fix this by setting merge_nr to "0" explicitly
when we realize that we have no merge config. Note that
merge_nr also counts the "merge_name" fields (which we
_do_ have; that's how merge_nr got incremented), so we
will "lose" access to them, in the sense that we forget
how many we had. But no callers actually care; we use
merge_name only while iteratively reading the config,
and then convert it to the final "merge" form the first
time somebody calls branch_get().
2. We set up the "merge" field every time branch_get is
called, even if it has already been done. This leaks
memory.
It's not a big deal in practice, since most code paths
will access only one branch, or perhaps each branch
only one time. But if you want to be pathological, you
can leak arbitrary memory with:
yes @{upstream} | head -1000 | git rev-list --stdin
We can fix this by skipping setup when branch->merge is
already non-NULL.
In addition to those two fixes, this patch pushes the "do we
need to setup merge?" logic down into set_merge, where it is
a bit easier to follow.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Call file_exists() instead of open-coding it. That's shorter, simpler
and the intent becomes clearer.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you run "git stash --help", you get the help for stash
(this magic is done by the git wrapper itself). But if you
run "git stash drop --help", you get an error. We
cannot show help specific to "stash drop", of course, but we
can at least give the user the normal stash manpage.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The option parser for git-stash stuffs unknown flags into
the $FLAGS variable, where they can be accessed by the
individual commands. However, most commands do not even look
at these extra flags, leading to unexpected results like
this:
$ git stash drop --help
Dropped refs/stash@{0} (e6cf6d80faf92bb7828f7b60c47fc61c03bd30a1)
We should notice the extra flags and bail. Rather than
annotate each command to reject a non-empty $FLAGS variable,
we can notice that "stash show" is the only command that
actually _wants_ arbitrary flags. So we switch the default
mode to reject unknown flags, and let stash_show() opt into
the feature.
Reported-by: Vincent Legoll <vincent.legoll@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This wires the in-repo-symlink following code through to the cat-file
builtin. In the event of an out-of-repo link, cat-file will print
the link in a new format.
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Wire up get_sha1_with_context to call get_tree_entry_follow_symlinks
when GET_SHA1_FOLLOW_SYMLINKS is passed in flags. G_S_FOLLOW_SYMLINKS
is incompatible with G_S_ONLY_TO_DIE because the diagnosis
that ONLY_TO_DIE triggers does not at present consider symlinks, and
it would be a significant amount of additional code to allow it to
do so.
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new function, get_tree_entry_follow_symlinks, to tree-walk.[ch].
The function is not yet used. It will be used to implement git
cat-file --batch --follow-symlinks.
The function locates an object by path, following symlinks in the
repository. If the symlinks lead outside the repository, the function
reports this to the caller.
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a winmerge scriptlet with the commands described in [1] so
that users can use winmerge without needing to perform any
additional configuration.
[1] http://thread.gmane.org/gmane.comp.version-control.git/268631
Helped-by: Philip Oakley <philipoakley@iee.org>
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Helped-by: Sebastian Schuberth <sschuberth@gmail.com>
Helped-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-sh-setup sets IFS but it is not used by git-difftool--helper.
Set IFS in git-mergetool--lib so that the mergetool scriptlets,
difftool, and mergetool do not need to do so.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One of our tests in t5551 creates a large number of tags,
and jumps through some hoops to do it efficiently. Let's
factor that out into a function so we can make other similar
tests.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We are explicitly ignoring SIGPIPE, as we fully expect that the
filter program may not read our output fully. Ignore EPIPE that
may come from writing to it as well.
A new test was stolen from Jeff's suggestion.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When copy_fd() function encounters errors, it emits error messages
itself, which makes it impossible for callers to take responsibility
for reporting errors, especially when they want to ignore certain
errors.
Move the error reporting to its callers in preparation.
- copy_file() and copy_file_with_time() by indirection get their
own calls to error().
- hold_lock_file_for_append(), when told to die on error, used to
exit(128) relying on the error message from copy_fd(), but now it
does its own die() instead. Note that the callers that do not
pass LOCK_DIE_ON_ERROR need to be adjusted for this change, but
fortunately there is none ;-)
- filter_buffer_or_fd() has its own error() already, in addition to
the message from copy_fd(), so this will change the output but
arguably in a better way.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The refs API uses ref_lock struct which had its own "int fd", even
though the same file descriptor was in the lock struct it contains.
Clean-up the code to lose this redundant field.
* sb/ref-lock-lose-lock-fd:
refs.c: remove lock_fd from struct ref_lock
Add the "--allow-unknown-type" option to "cat-file" to allow
inspecting loose objects of an experimental or a broken type.
* kn/cat-file-literally:
t1006: add tests for git cat-file --allow-unknown-type
cat-file: teach cat-file a '--allow-unknown-type' option
cat-file: make the options mutually exclusive
sha1_file: support reading from a loose object of unknown type
A heuristic to help the "git <cmd> <revs> <pathspec>" command line
convention to catch mistyped paths is to make sure all the non-rev
parameters in the later part of the command line are names of the
files in the working tree, but that means "git grep $str -- \*.c"
must always be disambiguated with "--", because nobody sane will
create a file whose name literally is asterisk-dot-see. Loosen the
heuristic to declare that with a wildcard string the user likely
meant to give us a pathspec.
* nd/dwim-wildcards-as-pathspecs:
pathspec: avoid the need of "--" when wildcard is used
"git merge FETCH_HEAD" learned that the previous "git fetch" could
be to create an Octopus merge, i.e. recording multiple branches
that are not marked as "not-for-merge"; this allows us to lose an
old style invocation "git merge <msg> HEAD $commits..." in the
implementation of "git pull" script; the old style syntax can now
be deprecated.
* jc/merge:
merge: deprecate 'git merge <message> HEAD <commit>' syntax
merge: handle FETCH_HEAD internally
merge: decide if we auto-generate the message early in collect_parents()
merge: make collect_parents() auto-generate the merge message
merge: extract prepare_merge_message() logic out
merge: narrow scope of merge_names
merge: split reduce_parents() out of collect_parents()
merge: clarify collect_parents() logic
merge: small leakfix and code simplification
merge: do not check argc to determine number of remote heads
merge: clarify "pulling into void" special case
t5520: test pulling an octopus into an unborn branch
t5520: style fixes
merge: simplify code flow
merge: test the top-level merge driver
"git rebase -i" moved the "current" command from "todo" to "done" a
bit too prematurely, losing a step when a "pick" did not even start.
* ph/rebase-i-redo:
rebase -i: redo tasks that die during cherry-pick
Help us to find broken test script that splits the body part of the
test by mistaken use of wrong kind of quotes.
* jc/test-prereq-validate:
test: validate prerequistes syntax
The connection initiation code for "ssh" transport tried to absorb
differences between the stock "ssh" and Putty-supplied "plink" and
its derivatives, but the logic to tell that we are using "plink"
variants were too loose and falsely triggered when "plink" appeared
anywhere in the path (e.g. "/home/me/bin/uplink/ssh").
* bc/connect-plink:
connect: improve check for plink to reduce false positives
t5601: fix quotation error leading to skipped tests
connect: simplify SSH connection code path
Developer support to automatically detect broken &&-chain in the
test scripts is now turned on by default.
* jk/test-chain-lint:
test-lib: turn on GIT_TEST_CHAIN_LINT by default
t7502-commit.sh: fix a broken and-chain
"git stash pop/apply" forgot to make sure that not just the working
tree is clean but also the index is clean. The latter is important
as a stash application can conflict and the index will be used for
conflict resolution.
* jk/stash-require-clean-index:
stash: require a clean index to apply
t3903: avoid applying onto dirty index
t3903: stop hard-coding commit sha1s
We have prepended $GIT_EXEC_PATH and the path "git" is installed in
(typically "/usr/bin") to $PATH when invoking subprograms and hooks
for almost eternity, but the original use case the latter tried to
support was semi-bogus (i.e. install git to /opt/foo/git and run it
without having /opt/foo on $PATH), and more importantly it has
become less and less relevant as Git grew more mainstream (i.e. the
users would _want_ to have it on their $PATH). Stop prepending the
path in which "git" is installed to users' $PATH, as that would
interfere the command search order people depend on (e.g. they may
not like versions of programs that are unrelated to Git in /usr/bin
and want to override them by having different ones in /usr/local/bin
and have the latter directory earlier in their $PATH).
* jk/git-no-more-argv0-path-munging:
stop putting argv[0] dirname at front of PATH
