We don't append a space after '--bool', so we can't expect
a regular expression to match the space.
Semi-noticed by Junio C Hamano :)
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If the alias expansion is prefixed with an exclamation point, treat
it as a shell command which is run using system(3).
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Among the low-level output functions called from flush_one_pair(),
this was the only function that did not take (filepair, options)
as arguments.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This file is incomplete, unmaintained, and it doesn't belong in the GIT
package anyway.
A more complete version is already included in the Linux -mm tree and
is about to make its way into mainline RSN.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds the support for automatically updating the buffer while editing.
A configuration variable git-blame-autoupdate controls whether this should
be enabled or not.
Signed-off-by: David Kågedal <davidk@lysator.liu.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Make git-blame use the current buffer contents for the blame, instead of
the saved file. This makes the blame correct even if there are unsaved
changes.
Also added a git-reblame command.
Signed-off-by: David Kågedal <davidk@lysator.liu.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Change installation instructions to using either "(require 'git-blame)"
or appropriate autoload instruction in GNU Emacs init file, .emacs
This required adding "(provide 'git-blame)" at the end of git-blame.el
and adding [preliminary] docstring to `git-blame-mode' function for
consistency (to mark function as interactive in `autoload' we have to
provide docstring as DOCSTRING is third arg, and INTERACTIVE fourth,
and both are optional). `git-blame-mode' is marked to autoload.
While at it ensure that we add `git-blame-mode' to `minor-mode-alist'
only once (in a way that does not depend on `cl' package).
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add Emacs Lisp file headers, according to "Coding Conventions" chapter
in Emacs Lisp Reference Manual and Elisp Area Convetions for
EmacsWiki:
http://www.emacswiki.org/cgi-bin/wiki/ElispAreaConventions
Those include: copyright notice, GNU GPL boilerplate, description and
instalation instructions as provided in email and in commit message
introducing git-blame.el, compatibility notes from another email by
David Kågedal about what to change to use it in GNU Emacs 20, and
"git-blame ends here" to detect if file was truncated. First line
includes setting file encoding via first line local variable values
(file variables).
Added comment to "(require 'cl)" to note why it is needed; "Coding
Conventions" advises to avoid require the `cl' package of Common Lisp
extensions at run time.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The way 'git pull' without explicit parameters work were not
explained well in any existing documentation.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When refs/remotes/gfi/master and refs/remotes/gfi/HEAD exist,
and the latter is a symref that points at the former, dwim_ref()
resolves string "gfi" to "refs/remotes/gfi/master" as expected,
but dwim_log() does not understand "gfi@{1.day}" and needs to be
told "gfi/master@{1.day}". This is confusing.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Since "git log origin/master" uses dwim_log() to match
"refs/remotes/origin/master", it makes sense to do that for
"git log --reflog", too.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Now, when format-patch outputs more than 9 patches, the numbers
are padded accordingly. Example:
[PATCH 009/167] The 9th patch of a series of 167
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If you say "git log -g --relative-date", it is very likely that
you want to see the reflog names in terms of a relative date.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Some reflogs are/were generated without a message; do not plainly
ignore those entries.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* 'master' of git://repo.or.cz/git/fastimport:
tar archive frontend for fast-import.
Correct spelling of fast-import in docs.
Correct some language in fast-import documentation.
Correct ^0 asciidoc syntax in fast-import docs.
It makes "git reflog [show]" act as
git log -g --pretty=oneline --abbrev-cmit
and is fairly straightforward. So you can just write
git reflog
or
git reflog show
and it will show you the reflog in a nice format.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add -C[NUM] to git-am and git-rebase so that patches can be applied even
if context has changed a bit.
Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is an example fast-import frontend, in less than 100 lines
of Perl. It accepts one or more tar archives on the command line,
passes them through gzcat/bzcat/zcat if necessary, parses out the
individual file headers and feeds all contained data to fast-import.
No temporary files are involved.
Each tar is treated as one commit, with the commit timestamp coming
from the oldest file modification date found within the tar.
Each tar is also tagged with an annotated tag, using the basename
of the tar file as the name of the tag.
Currently symbolic links and hard links are not handled by the
importer. The file checksums are also not verified.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Its spelled 'fast-import', not 'gfi'. Linus and Dscho have both
recently pointed this out to me on the mailing list.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Default values for command line options can be saved in .git/config (or the
global ~/.gitconfig). Config option names match the command line option names,
so cvsimport.d corresponds to git-cvsimport -d. One may also set
cvsimport.module to specify a default cvs module name.
Signed-off-by: James Bowes <jbowes@dangerouslyinc.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Minor documentation improvements, as suggested on the Git mailing
list by Horst H. von Brand and Karl Hasselström.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
I wrote this documentation with asciidoc 7.1.2, but apparently
asciidoc 8 assumes ^ means superscript. The solution was already
documented in rev-parse's manpage and is to use {caret} instead.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
For commit messages, we should really put the "line_termination" when we
output the character in between different commits, *not* between the
commit and the diff. The diff goes hand-in-hand with the commit, it
shouldn't be separated from it with the termination character.
So this:
- uses the termination character for true inter-commit spacing
- uses a regular newline between the commit log and the diff
We had it the other way around.
For the normal case where the termination character is '\n', this
obviously doesn't change anything at all, since we just switched two
identical characters around. So it's very safe - it doesn't change any
normal usage, but it definitely fixes "git log -z".
By fixing "git log -z", you can now also do insane things like
git log -p -z |
grep -z "some patch expression" |
tr '\0' '\n' |
less -S
and you will see only those commits that have the "some patch expression"
in their commit message _or_ their patches.
(This is slightly different from 'git log -S"some patch expression"',
since the latter requires the expression to literally *change* in the
patch, while the "git log -p -z | grep .." approach will see it if it's
just an unchanged _part_ of the patch context)
Of course, if you actually do something like the above, you're probably
insane, but hey, it works!
Try the above command line for a demonstration (of course, you need to
change the "some patch expression" to be something relevant). The old
behaviour of "git log -p -z" was useless (and got things completely wrong
for log entries without patches).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Earlier, when a path that was removed from the working tree was
chosen for update subcommand, you got an error like this:
error: git-resolve.sh: does not exist and --remove not passed
fatal: Unable to process file git-resolve.sh
Signed-off-by: Junio C Hamano <junkio@cox.net>
Quite nonstandard "date -d @11111111 +%s" does not even fail on
OpenBSD but gives the current date in "seconds since epoch"
format, which is useless for the purpose of this test. We want
to make sure that this returns exactly the same input before
proceeding.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* 'ml/gitk' (early part):
gitk: Use show-ref instead of ls-remote
Make gitk work reasonably well on Cygwin.
gitk - remove trailing whitespace from a few lines.
Not on all platforms are size_t and unsigned long equivalent.
Since I do not know how portable %z is, I play safe, and just
cast the respective variables to unsigned long.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When we remove the last reflog in a directory, opendir() would
succeed and we would iterate over its dirents, expecting retval
to be initialized to zero and setting it to non-zero only upon
seeing an error. If the directory is empty, oops!, we do not
have anybody that touches retval.
The problem is because we initialize retval to errno even on
success from opendir(), which would leave the errno unmolested.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* 'master' of git://repo.or.cz/git/fastimport:
Add a Tips and Tricks section to fast-import's manual.
Don't crash fast-import if the marks cannot be exported.
Dump all refs and marks during a checkpoint in fast-import.
Teach fast-import how to sit quietly in the corner.
Teach fast-import how to clear the internal branch content.
Minor timestamp related documentation corrections for fast-import.
Earlier we only used loose refs to anchor already existing
objects. When cloning from a repository that forked relatively
long time ago from the reference repository, this made the
want/have exchange by fetch-pack to do unnecessary work.
Signed-off-by: Junio C Hamano <junkio@cox.net>
There has been some informative lessons learned in the gfi user
community, and these really should be written down and documented
for future generations of frontend developers.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Use sed instead, it comes with cygwin and there is almost no chance of
someone installing a sed with default CRLF lineendings by accident.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Apparently fast-import used to die a horrible death if we
were unable to open the marks file for output. This is
slightly less than ideal, especially now that we dump
the marks as part of the `checkpoint` command.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If the frontend asks us to checkpoint (via the explicit checkpoint
command) its probably because they are afraid the current import
will crash/fail/whatever and want to make sure they can pickup from
the last checkpoint. To do that sort of recovery, we will need the
current tip of every branch and tag available at the next startup.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Often users will be running fast-import from within a larger frontend
process, and this may be a frequent periodic tool such as a future
edition of `git-svn fetch`. We don't want to bombard users with our
large stats output if they won't be interested in it, so `--quiet`
is now an option to make gfi be more silent.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Some frontends may not be able to (easily) keep track of which files
are included in the branch, and which aren't. Performing this
tracking can be tedious and error prone for the frontend to do,
especially if its foreign data source cannot supply the changed
path list on a per-commit basis.
fast-import now allows a frontend to request that a branch's tree
be wiped clean (reset to the empty tree) at the start of a commit,
allowing the frontend to feed in all paths which belong on the branch.
This is ideal for a tar-file importer frontend, for example, as
the frontend just needs to reformat the tar data stream into a gfi
data stream, which may be something a few Perl regexps can take
care of. :)
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
As discussed on the mailing list, the documentation used here was
not quite accurate. Improve upon it.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This was useful when the current recursive was in development, and
the original Python version was still called git-merge-recursive.
Now the synonym has served us well, it is time to move on.
Signed-off-by: Junio C Hamano <junkio@cox.net>
