Perforce does not strictly require the usage of branch specifications to create
branches. In these cases the branch detection code of git-p4 will not be able to
import them.
This patch adds support for git-p4.branchList configuration option, allowing
branches to be defined in git config.
Signed-off-by: Vitor Antunes <vitor.hda@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All branches in the Perforce server are downloaded to allow branch detection. If
you have a centralized server on a remote location and there is a big number of
branches this operation can take some time.
This patch adds the configuration option git-p4.branchUser to allow filtering
the branch list by user. Although this limits the branch maintenance in Perforce
to be done by a single user, it might be an advantage when the number of
branches being used in a specific depot is very small when compared with the
branches available in the server.
Signed-off-by: Vitor Antunes <vitor.hda@gmail.com>
Acked-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When branch detection is enabled each branch is named in git after their
relative depot path in Perforce. To do this the depot paths are compared against
each other to find their common base path. The current algorithm makes this
comparison on a character by character basis.
Assuming we have the following branches:
//depot/branches/featureA
//depot/branches/featureB
Then the base depot path would be //depot/branches/feature, which is an invalid
depot path.
The current patch fixes this by splitting the path into a list and comparing the
list entries, making it choose correctly //depot/branches as the base path.
Signed-off-by: Vitor Antunes <vitor.hda@gmail.com>
Acked-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Copy and rename detection arguments (-C and -M) allow setting a threshold value
for the similarity ratio. If the similarity is below this threshold the rename
or copy is ignored and the file is added as new.
This patch allows setting git-p4.detectRenames and git-p4.detectCopies options
to an integer value to set the respective threshold.
Signed-off-by: Vitor Antunes <vitor.hda@gmail.com>
Acked-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When importing a repo, the time on the initial commit had been
just "now". But this causes problems when trying to share among
git-p4 repos that were created identically, although at different
times. Instead, use the time in the top-most p4 change as the
time for the git import commit.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the git commits you are submitting contain changes made by
other people, the authorship will not be retained. Change git-p4
to warn of this and to note that --preserve-user can be used
to solve the problem (if you have suitable permissions).
The warning can be disabled.
Add a test case and update documentation.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
. Slightly more paranoid checking of results from 'p4 change'
. Remove superfluous "-G"
. Don't modify the username if it is unchanged.
. Add a comment in the change template to show what is
going to be done.
Signed-off-by: Luke Diamand <luke@diamand.org>
Acked-By: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Patches from git passed into p4 end up with the committer being identified
as the person who ran git-p4.
With "submit --preserve-user", git-p4 modifies the p4 changelist (after it
has been submitted), setting the p4 author field.
The submitter is required to have sufficient p4 permissions or git-p4
refuses to proceed. If the git author is not known to p4, the submit will
be abandoned unless git-p4.allowMissingP4Users is true.
Signed-off-by: Luke Diamand <luke@diamand.org>
Acked-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Note that the majority of git-p4 uses spaces, not tabs, for indentation.
Consistent indentation is a good hygiene for Python scripts, and mixing
tabs and spaces in Python can lead to hard-to-find bugs.
Signed-off-by: Andrew Garber <andrew@andrewgarber.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
e32e00d (git-p4: better message for "git-p4 sync" when not
cloned, 2011-02-19) broke another use case, that of using
"git-p4 sync" to import a new branch into an existing repository.
Refine the fix again, on top of the fix in ac34efc.
Reported-by: Michael Horowitz <michael.horowitz@ieee.org>
Signed-off-by: Pete Wyckoff <pw@padd.com>
Tested-by: Michael Horowitz <michael.horowitz@ieee.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is an error message that crashes the script because of an invalid ref
to the non-existing "path" variable. It is almost never printed, which
would explain why nobody encountered this problem before... But anyway,
this oneliner fixes it.
Signed-off-by: Tor Arvid Lund <torarvid@gmail.com>
Acked-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When files are added to perforce, the path to that file has whichever case
configuration that exists on the machine of the user who added the file.
What does that mean? It means that when Alice adds a file
//depot/DirA/FileA.txt
... and Bob adds:
//depot/dirA/FileB.txt
... we may or may not get a problem. If a user sets the config variable
git-p4.ignorecase to "true", we will consider //depot/DirA and //depot/dirA
to be the same directory.
Signed-off-by: Tor Arvid Lund <torarvid@gmail.com>
Acked-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With this patch, it is possible to call the gitConfig method with an optional
argument string, which will be passed to the "git config" executable. For
instance:
gitConfig("core.ignorecase", "--bool")
will ensure that you get the value "true", and won't have to check the returned
value for [1, true, on, yes].
Signed-off-by: Tor Arvid Lund <torarvid@gmail.com>
Acked-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
e32e00d (git-p4: better message for "git-p4 sync" when not cloned,
2011-02-19) broke the use of the "@all" revision specifier, e.g.,
git-p4 clone //depot/xxx@all
Fix it as per Tor Arvid's quick patch.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Reported-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Based-on-patch-by: Tor Arvid Lund <torarvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* pw/p4:
git-p4: support clone --bare
git-p4: decode p4 wildcard characters
git-p4: better message for "git-p4 sync" when not cloned
git-p4: reinterpret confusing p4 message
git-p4: accommodate new move/delete type in p4
git-p4: add missing newline in initial import message
git-p4: fix key error for p4 problem
git-p4: test script
In an attempt to overwrite the 'Description:' section of the p4 change
log to include the git commit messages, it also overwrote the 'Jobs:'
section. Â This fix restores the 'Job:' section.
Signed-off-by: Michael Horowitz <michael.horowitz@ieee.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add new config options:
git-p4.detectCopies - Enable copy detection.
git-p4.detectCopiesHarder - Find copies harder.
The detectCopies option should be set to a true/false value.
The detectCopiesHarder option should be set to true/false value.
P4Submit can now process diff-tree C status and integrate files accordingly.
Signed-off-by: Vitor Antunes <vitor.hda@gmail.com>
Acked-by: Pete Wyckoff <pw@padd.com>
Acked-by: Tor Arvid Lund <torarvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Only open files for edit after integrating if the SHA1 of source and destination
differ from each other.
Add git config option detectRenames to allow permanent rename detection. This
options should be set to a true/false value.
Rename "detectRename" variable to "detectRenames" to make it more coherent with
the description in git man pages, which always use plural.
Signed-off-by: Vitor Antunes <vitor.hda@gmail.com>
Acked-by: Pete Wyckoff <pw@padd.com>
Acked-by: Tor Arvid Lund <torarvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Just like git clone --bare, build a .git directory but no
checked out files.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Acked-By: Tor Arvid Lund <torarvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are four wildcard characters in p4. Files with these
characters can be added to p4 repos using the "-f" option.
They are stored in %xx notation, and when checked out, p4
converts them back to normal.
This patch does the same thing when importing into git,
converting the four special characters. Without this change,
the files appear with literal %xx in their names.
Be careful not to produce "*" in filenames on windows. That
will fail.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A common error is to do "git-p4 sync" in a repository that
was not initialized by "git-p4 clone". There will be no
p4 refs. The error message in this case is a traceback
for an assertion, which is confusing.
Change it instead to explain the likely problem.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Acked-By: Tor Arvid Lund <torarvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Error output will look like this:
glom$ git p4 clone //deopt
Importing from //deopt into .
Reinitialized existing Git repository in /tmp/x/.git/
Doing initial import of //deopt from revision #head into refs/remotes/p4/master
p4 returned an error: //deopt/... - must refer to client glom.
This particular p4 error is misleading.
Perhaps the depot path was misspelled.
Depot path: //deopt
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
562d53f (git-p4: Fix sync errors due to new server version, 2010-01-21)
taught git-p4 sync to recognize the new move/delete type, but this type
can also show up in an initial clone and labels output.
Instead of replicating the support in three places, hoist the definition
somewhere global.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Acked-By: Tor Arvid Lund <torarvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some p4 failures result in an error, but the info['code'] is not
set. These include a bad p4 executable, or a core dump from p4,
and other odd internal errors where p4 fails to generate proper
marshaled output.
Make sure the info key exists before using it to avoid a python
traceback.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using the p4 client spec, this attempts to obey the client's
output preferences.
For example, a view like
//depot/foo/branch/... //client/branch/foo/...
//depot/bar/branch/... //client/branch/bar/...
will result in a directory layout in the git tree of
branch/
branch/foo
branch/bar
p4 can do various other reordering that this change doesn't support,
but we should detect it and at least fail nicely.
Signed-off-by: Ian Wienand <ianw@vmware.com>
Acked-by: Pete Wyckoff <pw@padd.com>
Acked-by: Tor Arvid Lund <torarvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix inadvertent breakage from b932705 (git-p4: stream from perforce to
speed up clones, 2009-07-30) in the code that strips the trailing '\n'
from p4 print on a symlink. (In practice, contents is of the form
['target\n', ''].)
Signed-off-by: Evan Powers <evan.powers@gmail.com>
Acked-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix sync errors due to new Perforce servers.
The P4D/NTX64/2009.2/228098 (2009/12/16) server reports
'move/delete' instead of 'delete'. This causes the Perforce
depot and the git repo to get out of sync. Fixed by adding
the new status string.
Signed-off-by: Pal-Kristian Engstad <pal_engstad@naughtydog.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The strip() is required to remove the trailing newline character,
as already done elsewhere.
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the new "git var GIT_EDITOR" feature to decide what editor to
use, instead of duplicating its logic elsewhere. This should make
the behavior of commands in edge cases (e.g., editor names with
spaces) a little more consistent.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The popen2, sha and sets modules are deprecated in Python 2.6 (sha in
Python 2.5). Both popen2 and sha are not actually used in git-p4.
Replace usage of sets.Set with the builtin set object.
The built-in set object was added in Python 2.4 and is already used in
other parts of this script, so this dependency is nothing new.
Signed-off-by: Reilly Grant <reillyeon@qotw.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change commit() to stream data from Perforce and into fast-import
rather than reading into memory first, and then writing out. This
hugely reduces the memory requirements when cloning non-incrementally.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some users have tabs in their names, oddly enough. This
causes problems when loading the usercache from disk,
as split separates the fields on the wrong tabs. When
fast-import's parse_ident() tries to parse the committer
field, it is unhappy about the unbalanced <..> angle brackets.
It is easy enough to convert the tabs to single spaces.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Acked-by: Simon Hausmann <simon@lst.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a particular changeset affects multiple depot paths, it
will appear multiple times in the output of "p4 changes".
Filter out the duplicates to avoid the extra empty commits that
this otherwise would create.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Acked-by: Simon Hausmann <simon@lst.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unfortunately, I introduced a bug in commit 7f705dc36 (git-p4: Fix bug in
p4Where method). This happens because sometimes the result from
"p4 where <somepath>" doesn't contain a "depotFile" key, but instead a
"data" key that needs further parsing. This commit should ensure that both
of these cases are checked.
Signed-off-by: Tor Arvid Lund <torarvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running:
p4 where //depot/SomePath/...
The result can in some situations look like:
//depot/SomePath/... //client/SomePath/... /home/user/p4root/SomePath/...
-//depot/SomePath/UndesiredSubdir/... //client/SomePath/UndesiredSubdir/... /home/user/p4root/SomePath/UndesiredSubdir/...
This depends on the users Client view. The current p4Where method will now
return /home/user/p4root/SomePath/UndesiredSubdir/... which is not what we
want. This patch loops through the results from "p4 where", and picks the one
where the depotFile exactly matches the given depotPath (//depot/SomePath/...
in this example).
Signed-off-by: Tor Arvid Lund <torarvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
sha1_file.c: resolve confusion EACCES vs EPERM
sha1_file: avoid bogus "file exists" error message
git checkout: don't warn about unborn branch if -f is already passed
bash: offer refs instead of filenames for 'git revert'
bash: remove dashed command leftovers
git-p4: fix keyword-expansion regex
fast-export: use an unsorted string list for extra_refs
Add new testcase to show fast-export does not always exports all tags
This text:
my $dir = $File::Find::dir;
return if ($dir !~ m,$options->{dirpat}$,);
was improperly converted to:
my $dir = $File$dir !~ m,$options->{dirpat}$,);
by the keyword identifier expansion code. Add a \n
to make sure the regex doesn't go across end-of-line
boundaries.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Acked-by: Simon Hausmann <simon@lst.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes git-p4 noticibly faster on Windows.
Signed-off-by: John Chapman <thestar@fussycoder.id.au>
Acked-by: Simon Hausmann <simon@lst.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Purged files are handled as if they are merely deleted, which is not
entirely optimal, but I don't know of any other way to handle them.
File data is deleted from memory as early as they can, and they are more
efficiently handled, at (significant) cost to CPU usage.
Still need to handle p4 branches with spaces in their names.
Still need to make git-p4 clone more reliable.
- Perhaps with a --continue option. (Sometimes the p4 server kills
the connection)
Signed-off-by: John Chapman <thestar@fussycoder.id.au>
Acked-by: Simon Hausmann <simon@lst.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When this option is passed to git p4 clone, the checkout at the end would
previously fail. This patch fixes it by optionally creating the master branch
from refs/heads/p4/master, which is the correct one for this option.
Signed-off-by: Tor Arvid Lund <torarvid@gmail.com>
Acked-By: Simon Hausmann <simon@lst.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently it is not possible to skip the submission of a change to Perforce
when running git-p4 submit. This patch compares the modification time before
and after the submit editor invokation and offers a prompt for skipping if
the submit template file was not saved.
Signed-off-by: Simon Hausmann <simon@lst.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function built a p4 command string via the p4_build_cmd function, but
ignored the result.
Signed-off-by: Tor Arvid Lund <torarvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
