The t5562 script occasionally takes 60 extra seconds to complete due to
a race condition in the invoke-with-content-length.pl helper.
The way it's supposed to work is this:
- we set up a SIGCLD handler
- we kick off http-backend and write to it with a set content-length,
but _don't_ close the pipe
- we sleep for 60 seconds, assuming that SIGCLD from http-backend
finishing will interrupt us
- after the sleep finishes (whetherby 60 seconds or because it was
interrupted by the signal), we check a flag to see if our SIGCLD
handler was called. If not, then we complain.
This usually completes immediately, because the signal interrupts our
sleep. But very occasionally the child process dies _before_ we hit the
sleep, so we don't realize it. The test still completes successfully
(because our $exited flag is set), but it takes an extra 60 seconds.
There's no way to check the flag and sleep atomically. So the best we
can do with this approach is to sleep in smaller chunks (say, 1 second)
and check the flag incrementally. Then we waste a maximum of 1 second if
we lose the race. This was proposed in:
https://lore.kernel.org/git/20190218205028.32486-1-max@max630.net/
and it does work. But we can do better.
Instead of blocking on sleep and waiting for the child signal to
interrupt us, we can block on the child exiting and set an alarm signal
to trigger the timeout.
This lets us exit the script immediately when the child behaves (with no
race possible), and wait a maximum of 60 seconds when it doesn't.
Note one small subtlety: perl is very willing to restart the waitpid()
call after the alarm is delivered, even if we've thrown an exception via
die. "perldoc -f alarm" claims you can get around this with an eval/die
combo (and even has some example code), but it doesn't seem to work for
me with waitpid(); instead, we continue waiting until the child exits.
So instead, we'll instruct the child process to exit in the alarm
handler itself. In the original code this was done by calling
close($out). That would continue to work, since our child is always
http-backend, which should exit when its stdin closes. But we can be
even more robust against a hung or confused child by sending a KILL
signal, which should terminate it immediately.
Reported-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We only need to provide a mode if we are willing to let open(2) create
the file, which is not the case here, so drop the unnecessary parameter.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace the catch-all error message with specific ones for opening and
duplicating by calling the wrappers xopen and xdup. The code becomes
easier to follow when error handling is reduced to two letters.
Remove the unnecessary mode parameter while at it -- we expect /dev/null
to already exist.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Line-wrap the definition of finish_tmp_packfile() to make subsequent
changes easier to read. See 0e990530ae (finish_tmp_packfile(): a
helper function, 2011-10-28) for the commit that introduced this
overly long line.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a performance regression introduced in a587b5a786 (pack-write.c:
extract 'write_rev_file_order', 2021-03-30) and stop needlessly
allocating the "pack_order" array and sorting it with
"pack_order_cmp()", only to throw that work away when we discover that
we're not writing *.rev files after all.
This redundant work was not present in the original version of this
code added in 8ef50d9958 (pack-write.c: prepare to write 'pack-*.rev'
files, 2021-01-25). There we'd call write_rev_file() from
e.g. finish_tmp_packfile(), but we'd "return NULL" early in
write_rev_file() if not doing a "WRITE_REV" or "WRITE_REV_VERIFY".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Back when a1be47e4 (hash-object: fix buffer reuse with --path in a
subdirectory, 2017-03-20) was written, the prefix_filename() helper
used a static piece of memory to the caller, making the caller
responsible for copying it, if it wants to keep it across another
call to the same function. Two callers of the prefix_filename() in
hash-object were made to xstrdup() the value obtained from it.
But in the same series, when e4da43b1 (prefix_filename: return newly
allocated string, 2017-03-20) changed the rule to gave the caller
possession of the memory, we forgot to revert one of the xstrdup()
changes, allowing the returned value to leak.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git bugreport writes bug report to the current directory by default,
instead of repository root.
Fix the documentation.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This script was added in f28ac70f48 (Move all dashed-form commands to
libexecdir, 2007-11-28) when commands such as "git-add" lived in the
bin directory, instead of the git exec directory.
This notice helped someone incorrectly installing version v1.6.0 and
later into a directory built for a pre-v1.6.0 git version.
We're now long past the point where anyone who'd be helped by this
warning is likely to be doing that, so let's just remove this check
and warning to simplify the Makefile.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a regression in my c95e3a3f0b (send-email: move trivial config
handling to Perl, 2021-05-28) where we'd pick the first config key out
of multiple defined ones, instead of using the normal "last key wins"
semantics of "git config --get".
This broke e.g. cases where a .git/config would have a different
sendemail.smtpServer than ~/.gitconfig. We'd pick the ~/.gitconfig
over .git/config, instead of preferring the repository-local
version. The same would go for /etc/gitconfig etc.
The full list of impacted config keys (the %config_settings values
which are references to scalars, not arrays) is:
sendemail.smtpencryption
sendemail.smtpserver
sendemail.smtpserverport
sendemail.smtpuser
sendemail.smtppass
sendemail.smtpdomain
sendemail.smtpauth
sendemail.smtpbatchsize
sendemail.smtprelogindelay
sendemail.tocmd
sendemail.cccmd
sendemail.aliasfiletype
sendemail.envelopesender
sendemail.confirm
sendemail.from
sendemail.assume8bitencoding
sendemail.composeencoding
sendemail.transferencoding
sendemail.sendmailcmd
I.e. having any of these set in say ~/.gitconfig and in-repo
.git/config regressed in v2.33.0 to prefer the --global one over the
--local.
To test this add a test of config priority to one of these config
variables, most don't have tests at all, but there was an existing one
for sendemail.8bitEncoding.
The "git config" (instead of "test_config") is somewhat of an
anti-pattern, but follows established conventions in
t9001-send-email.sh, likewise with any other pattern or idiom in this
test.
The populating of home/.gitconfig and setting of HOME= is copied from
a test in t0017-env-helper.sh added in 1ff750b128 (tests: make
GIT_TEST_GETTEXT_POISON a boolean, 2019-06-21). This test fails
without this bugfix, but now it works.
Reported-by: Eli Schwartz <eschwartz@archlinux.org>
Tested-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
output() reuses the same struct diff_options for multiple calls of
diff_flush(). Set the option no_free to instruct it to keep the
ignore regexes between calls and release them explicitly at the end.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes 19b2517f (diff-merges: move specific diff-index "-m"
handling to diff-index, 2021-05-21).
That commit disabled handling of all diff for merges options in
diff-index on an assumption that they are unused. However, it later
appeared that -c and --cc, even though undocumented and not being
covered by tests, happen to have had particular effect on diff-index
output.
Restore original -c/--cc options handling by diff-index.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ll_binary_merge() function assumes that the ancestor blob is
different from either side of the new versions, and always fails
the merge in conflict, unless -Xours or -Xtheirs is in effect.
The normal "merge" machineries all resolve the trivial cases
(e.g. if our side changed while their side did not, the result
is ours) without triggering the file-level merge drivers, so the
assumption is warranted.
The code path in "git apply --3way", however, does not check for
the trivial three-way merge situation and always calls the
file-level merge drivers. This used to be perfectly OK back
when we always first attempted a straight patch application and
used the three-way code path only as a fallback. Any binary
patch that can be applied as a trivial three-way merge (e.g. the
patch is based exactly on the version we happen to have) would
always cleanly apply, so the ll_binary_merge() that is not
prepared to see the trivial case would not have to handle such a
case.
This no longer is true after we made "--3way" to mean "first try
three-way and then fall back to straight application", and made
"git apply -3" on a binary patch that is based on the current
version no longer apply.
Teach "git apply -3" to first check for the trivial merge cases
and resolve them without hitting the file-level merge drivers.
Signed-off-by: Jerry Zhang <jerry@skydio.com>
[jc: stolen tests from Jerry's patch]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When executing git-update-ref(1) with the `--stdin` flag, then the user
can queue updates and, since e48cf33b61 (update-ref: implement
interactive transaction handling, 2020-04-02), interactively drive the
transaction's state via a set of transactional verbs. This interactivity
is somewhat broken though: while the caller can use these verbs to drive
the transaction's state, the status messages which confirm that a verb
has been processed is not flushed. The caller may thus be left hanging
waiting for the acknowledgement.
Fix the bug by flushing stdout after writing the status update. Add a
test which catches this bug.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In make_remote(), we store the return value of hashmap_put() and check
it using assert(), but don't otherwise use it. If Git is compiled with
NDEBUG, then the assert() becomes a noop, and nobody looks at the
variable at all. This causes some compilers to produce warnings.
Let's switch it instead to a BUG(). This accomplishes the same thing,
but is always compiled in (and we don't have to worry about the cost;
the check is cheap, and this is not a hot code path).
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the trailing dot from the warning we emit about gc.log. It's
common for various terminal UX's to allow the user to select "words",
and by including the trailing dot a user wanting to select the path to
gc.log will need to manually remove the trailing dot.
Such a user would also probably need to adjust the path if it e.g. had
spaces in it, but this should address this very common case.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Suggested-by: Jan Judas <snugar.i@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Expand the section about namespaces in the documentation of
`transfer.hideRefs` to point out the subtle differences between
`upload-pack` and `receive-pack`.
ffcfb68176 (upload-pack.c: treat want-ref relative to namespace,
2021-07-30) taught `upload-pack` to reject `want-ref`s for hidden refs,
which is now mentioned. It is clarified that at no point the name of a
hidden ref is revealed, but the object id it points to may.
Signed-off-by: Kim Altintop <kim@eagain.st>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When 'upload-pack' runs within the context of a git namespace, treat any
'want-ref' lines the client sends as relative to that namespace.
Also check if the wanted ref is hidden via 'hideRefs'. If it is hidden,
respond with an error as if the ref didn't exist.
Helped-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Kim Altintop <kim@eagain.st>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Assembling a "raw" fetch command to be fed directly to "test-tool serve-v2"
is extracted into a test helper.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Kim Altintop <kim@eagain.st>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the free_mailmap_entry() code added in 0925ce4d49 (Add map_user()
and clear_mailmap() to mailmap, 2009-02-08) the intent was clearly to
clear the "me" structure, but while we freed parts of the
mailmap_entry structure, we didn't free the structure itself. The same
goes for the "mailmap_info" structure.
This brings the number of SANITIZE=leak failures in t4203-mailmap.sh
down from 50 to 49. Not really progress as far as the number of
failures is concerned, but as far as I can tell this fixes all leaks
in mailmap.c itself. There's still users of it such as builtin/log.c
that call read_mailmap() without a clear_mailmap(), but that's on
them.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 7f40759496 (fast-export: tighten anonymize_mem() interface to
handle only strings, 2020-06-23) changed the interface used in anonymizing
strings, but failed to update the size of annotated tag messages to match
the new anonymized string.
As a result, exporting tags having messages longer than 13 characters
would create output that couldn't be parsed by fast-import,
as the data length indicated was larger than the data output.
Reset the message size when anonymizing, and add a tag with a "long"
message to the test.
Signed-off-by: Tal Kelrich <hasturkun@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak in a2ba162cda (object-info: support for retrieving
object info, 2021-04-20) which appears to have been based on a
misunderstanding of how the pkt-line.c API works. There is no need to
strdup() input to packet_writer_write(), it's just a printf()-like
format function.
This fixes a potentially large memory leak, since the number of OID
lines the "object-info" call can be arbitrarily large (or a small one
if the request is small).
This makes t5701-git-serve.sh pass again under SANITIZE=leak, as it
did before a2ba162cda.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Bruno Albuquerque <bga@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If multiple independent patches are sent with send-email, even if the
"In-Reply-To" and "References" headers are not managed by --thread or
--in-reply-to, their values may be propagated from prior patches to
subsequent patches with no such headers defined.
To mitigate this and potential future issues, make sure all global
patch-specific variables are always either handled by
command-specific code (e.g. threading), or are reset to their default
values for every iteration.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Marvin Häuser <mhaeuser@posteo.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Every once in a while a test somehow manages to escape from its trash
directory and modifies the surrounding repository, whether because of
a bug in git itself, a bug in a test [1], or e.g. when trying to run
tests with a shell that is, in general, unable to run our tests [2].
Set GIT_CEILING_DIRECTORIES="$TRASH_DIRECTORY/.." as an additional
safety measure to protect the surrounding repository at least from
modifications by git commands executed in the tests (assuming that
handling of ceiling directories during repository discovery is not
broken, and, of course, it won't save us from regular shell commands,
e.g. 'cd .. && rm -f ...').
[1] e.g. https://public-inbox.org/git/20210423051255.GD2947267@szeder.dev
[2] $ git symbolic-ref HEAD
refs/heads/master
$ ksh ./t2011-checkout-invalid-head.sh
[... a lot of "not ok" ...]
$ git symbolic-ref HEAD
refs/heads/other
(In short: 'ksh' doesn't support the 'local' builtin command,
which is used by 'test_oid', causing it to return with error
whenever it's called, leaving ZERO_OID set to empty, so when the
test 'checkout main from invalid HEAD' runs 'echo $ZERO_OID
>.git/HEAD' it writes a corrupt (not invalid) HEAD, and subsequent
git commands don't recognize the repository in the trash directory
anymore, but operate on the surrounding repo.)
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix syntax and correct the format of printf in MyFirstObjectWalk.txt
Signed-off-by: Zoker <kaixuanguiqu@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Copy the 'index_state->dir_hash' back to the real istate after expanding
a sparse index.
A crash was observed in 'git status' during some hashmap lookups with
corrupted hashmap entries. During an index expansion, new cache-entries
are added to the 'index_state->name_hash' and the 'dir_hash' in a
temporary 'index_state' variable 'full'. However, only the 'name_hash'
hashmap from this temp variable was copied back into the real 'istate'
variable. The original copy of the 'dir_hash' was incorrectly
preserved. If the table in the 'full->dir_hash' hashmap were realloced,
the stale version (in 'istate') would be corrupted.
The test suite does not operate on index sizes sufficiently large to
trigger this reallocation, so they do not cover this behavior.
Increasing the test suite to cover such scale is fragile and likely
wasteful.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git branch only allows deleting branches that point to valid commits.
Skip that check if --force is given, as the caller is indicating with
it that they know what they are doing and accept the consequences.
This allows deleting dangling branches, which previously had to be
reset to a valid start-point using --force first.
Reported-by: Ulrich Windl <Ulrich.Windl@rz.uni-regensburg.de>
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pass the struct object_id on instead of just its hash member.
This is simpler and avoids the need to guess the algorithm.
Signed-off-by: René Scharfe <l.s.r@web.de>
Acked-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Only one of the callers of rev_is_head() provides two hashes to compare.
Move that check there and convert it to struct object_id.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The word "encoding" can mean a lot of things (e.g., base64 or
quoted-printable encoding in emails, HTML entities, URL encoding, and so
on). The documentation for i18n.commitEncoding and i18n.logOutputEncoding
uses the phrase "character encoding" to make this more clear.
Let's use that phrase in other places to make it clear what kind of
encoding we are talking about. This patch covers the gui.encoding
option, as well as the --encoding option for git-log, etc (in this
latter case, I word-smithed the sentence a little at the same time).
That, coupled with the mention of iconv in the --encoding description,
should make this more clear.
The other spot I looked at is the working-tree-encoding section of
gitattributes(5). But it gives specific examples of encodings that I
think make the meaning pretty clear already.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user asks for a pretty-printed commit to be converted (either
explicitly with --encoding=foo, or implicitly because the commit is
non-utf8 and we want to convert it), we pass it through iconv(). If that
fails, we fall back to showing the input verbatim, but don't tell the
user that the output may be bogus.
Let's add a warning to do so, along with a mention in the documentation
for --encoding. Two things to note about the implementation:
- we could produce the warning closer to the call to iconv() in
reencode_string_len(), which would let us relay the value of errno.
But this is not actually very helpful. reencode_string_len() does
not know we are operating on a commit, and indeed does not know that
the caller won't produce an error of its own. And the errno values
from iconv() are seldom helpful (iconv_open() only ever produces
EINVAL; perhaps EILSEQ from iconv() might be illuminating, but it
can also return EINVAL for incomplete sequences).
- if the reason for the failure is that the output charset is not
supported, then the user will see this warning for every commit we
try to display. That might be ugly and overwhelming, but on the
other hand it is making it clear that every one of them has not been
converted (and the likely outcome anyway is to re-try the command
with a supported output encoding).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'Filtering contents...' progress report from delayed checkout is
displayed even when checkout and clone are invoked with --quiet or
--no-progress. Furthermore, it is displayed unconditionally, without
first checking whether stdout is a tty. Let's fix these issues and also
add some regression tests for the two code paths that currently use
delayed checkout: unpack_trees.c:check_updates() and
builtin/checkout.c:checkout_worktree().
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git column's '--nl' option can be used to specify a "string to be
printed at the end of each line" (quoting the man page), but this
option and its mandatory argument has been parsed as OPT_INTEGER since
the introduction of the command in 7e29b8254f (Add column layout
skeleton and git-column, 2012-04-21). Consequently, any non-number
argument is rejected by parse-options, and any number other than 0
leads to segfault:
$ printf "%s\n" one two |git column --mode=plain --nl=foo
error: option `nl' expects a numerical value
$ printf "%s\n" one two |git column --mode=plain --nl=42
Segmentation fault (core dumped)
$ printf "%s\n" one two |git column --mode=plain --nl=0
one
two
Parse this option as OPT_STRING.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add and apply a semantic patch for using xopen() instead of calling
open(2) and die() or die_errno() explicitly. This makes the error
messages more consistent and shortens the code.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the flags O_CREAT and O_EXCL are both given then open(2) is supposed
to create the file and error out if it already exists. The error
message in that case looks like this:
fatal: could not open 'foo' for writing: File exists
Without further context this is confusing: Why should the existence of
the file pose a problem? Isn't that a requirement for writing to it?
Add a more specific error message for that case to tell the user that we
actually don't expect the file to preexist, so the example becomes:
fatal: unable to create 'foo': File exists
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For diff family commands, we can tell them to exclude changes outside
of some directories if --relative is requested.
In diff_unmerge(), NULL will be returned if the requested path is
outside of the interesting directories, thus we'll run into NULL
pointer dereference in run_diff_files when trying to dereference
its return value.
Checking for return value of diff_unmerge before dereferencing
is not sufficient, though. Since, diff engine will try to work on such
pathspec later.
Let's not run diff on those unintesting entries, instead.
As a side effect, by skipping like that, we can save some CPU cycles.
Reported-by: Thomas De Zeeuw <thomas@slight.dev>
Tested-by: Carlo Arenas <carenas@gmail.com>
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In test_atom(), we're piping the output of cat-file to tail(1),
thus, losing its exit status.
Let's use a temporary file to preserve git exit status code.
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In t6300, some tests are guarded behind some prerequisites.
Thus, objects created by those tests ain't available if those
prerequisites are unsatistified. Attempting to run "cat-file"
on those objects will run into failure.
In fact, running t6300 in an environment without gpg(1),
we'll see those warnings:
fatal: Not a valid object name refs/tags/signed-empty
fatal: Not a valid object name refs/tags/signed-short
fatal: Not a valid object name refs/tags/signed-long
Let's put those commands into the real tests, in order to:
* skip their execution if prerequisites aren't satistified.
* check their exit status code
The expected value for objects with type: commit needs to be
computed outside the test because we can't rely on "$3" there.
Furthermore, to prevent the accidental usage of that computed
expected value, BUG out on unknown object's type.
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 0696232390 (pack-redundant: fix crash when one packfile in repo,
2020-12-16) added one some new tests to t5323. At the time, the sub-repo
we used was called "master". But in a parallel branch, this was switched
to "main".
When the latter branch was merged in 27d7c8599b (Merge branch
'js/default-branch-name-tests-final-stretch', 2021-01-25), some of those
spots caused textual conflicts, but some (for tests that were far enough
away from other changed code) were just semantic. The merge resolution
fixed up most spots, but missed this one.
Even though this did impact actual code, it turned out not to fail the
tests. Running 'cd "$master_repo"' ended up staying in the same
directory, running the test in the main trash repo instead of the
sub-repo. But because the point of the test is checking behavior when
there are no packfiles, it worked in either repo (since both are empty
at this point in the script).
Reported-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The die() routine adds a "fatal: " prefix, there is no reason to add
another one. Fixes code added in e65123a71d (builtin rebase: support
`git rebase <upstream> <switch-to>`, 2018-09-04).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Set packet_trace_identity() for ls-remote. This replaces the generic
"git" identity in GIT_TRACE_PACKET=<file> traces to "ls-remote", e.g.:
[...] packet: upload-pack> version 2
[...] packet: upload-pack> agent=git/2.32.0-dev
[...] packet: ls-remote< version 2
[...] packet: ls-remote< agent=git/2.32.0-dev
Where in an "git ls-remote file://<path>" dialog ">" is the sender (or
"to the server") and "<" is the recipient (or "received by the
client").
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
xmalloc() dies on error, allows zero-sized allocations and enforces
GIT_ALLOC_LIMIT for testing. Our mmap replacement doesn't need any of
that. Let's cut out the wrapper, reject zero-sized requests as required
by POSIX and use malloc(3) directly. Allocation errors were needlessly
handled by git_mmap() before; this code becomes reachable now.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On macOS, we use launchctl to manage the background maintenance
schedule. This uses a set of .plist files to describe the schedule, but
these files are also registered with 'launchctl bootstrap'. If multiple
'git maintenance start' commands run concurrently, then they can collide
replacing these schedule files and registering them with launchctl.
To avoid extra launchctl commands, do a check for the .plist files on
disk and check if they are registered using 'launchctl list <name>'.
This command will return with exit code 0 if it exists, or exit code 113
if it does not.
We can test this behavior using the GIT_TEST_MAINT_SCHEDULER environment
variable.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When two `git maintenance` processes try to write the `.plist` file, we
need to help them with serializing their efforts.
The 150ms time-out value was determined from thin air.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Windows, $(pwd) returns a drive-letter style path C:/foo, while $PWD
contains a POSIX style /c/foo path. When we want to interpolate the
current directory in the PATH variable, we must not use the C:/foo style,
because the meaning of the colon is ambiguous. Use the POSIX style.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The variable D is never defined in test t5582, more severely the test
fails if D is defined by something outside the test suite, so remove
this spurious line.
Signed-off-by: Mickey Endito <mickey.endito.2323@protonmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a rebase is started with a --strategy option other than "ort" or
"recursive" then "merge -c" does not allow the user to reword the
commit message.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When fast-forwarding we do not create a new commit so .git/MERGE_MSG
is not removed and can end up seeding the message of a commit made
after the rebase has finished. Avoid writing .git/MERGE_MSG when we
are fast-forwarding by writing the file after the fast-forward
checks. Note that there are no changes to the fast-forward code, it is
simply moved.
Note that the way this change is implemented means we no longer write
the author script when fast-forwarding either. I believe this is safe
for the reasons below but it is a departure from what we do when
fast-forwarding a non-merge commit. If we reword the merge then 'git
commit --amend' will keep the authorship of the commit we're rewording
as it ignores GIT_AUTHOR_* unless --reset-author is passed. It will
also export the correct GIT_AUTHOR_* variables to any hooks and we
already test the authorship of the reworded commit. If we are not
rewording then we no longer call spilt_ident() which means we are no
longer checking the commit author header looks sane. However this is
what we already do when fast-forwarding non-merge commits in
skip_unnecessary_picks() so I don't think we're breaking any promises
by not checking the author here.
Reported-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
None of the existing reword tests check that there are no uncommitted
changes when the editor is opened. Reuse the editor script from the
last commit to fix this omission.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user runs git log while rewording a commit it is confusing if
sometimes we're amending the commit that's being reworded and at other
times we're creating a new commit depending on whether we could
fast-forward or not[1]. For this reason the reword command ensures
that there are no uncommitted changes when rewording. The reword
command also allows the user to edit the todo list while the rebase is
paused. As 'merge -c' also rewords commits make it behave like reword
and add a test.
[1] https://lore.kernel.org/git/xmqqlfvu4be3.fsf@gitster-ct.c.googlers.com/T/#m133009cb91cf0917bcf667300f061178be56680a
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
