To correctly perform its testing function,
test-dump-untracked-cache should not change the state of the
untracked cache in the index.
As a previous patch makes read_index_from() change the state of
the untracked cache and as test-dump-untracked-cache indirectly
calls this function, we need a mechanism to prevent
read_index_from() from changing the untracked cache state when
it's called from test-dump-untracked-cache.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An earlier change in 2.5.x-era broke users' hooks and aliases by
exporting GIT_WORK_TREE to point at the root of the working tree,
interfering when they tried to use a different working tree without
setting GIT_WORK_TREE environment themselves.
* nd/stop-setenv-work-tree:
Revert "setup: set env $GIT_WORK_TREE when work tree is set, like $GIT_DIR"
Prepare for Git on-disk repository representation to undergo
backward incompatible changes by introducing a new repository
format version "1", with an extension mechanism.
* jk/repository-extension:
introduce "preciousObjects" repository extension
introduce "extensions" form of core.repositoryformatversion
It's a common pattern to do:
foo = xmalloc(strlen(one) + strlen(two) + 1 + 1);
sprintf(foo, "%s %s", one, two);
(or possibly some variant with strcpy()s or a more
complicated length computation). We can switch these to use
xstrfmt, which is shorter, involves less error-prone manual
computation, and removes many sprintf and strcpy calls which
make it harder to audit the code for real buffer overflows.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Running an aliased command from a subdirectory when the .git thing
in the working tree is a gitfile pointing elsewhere did not work.
* nd/export-worktree:
setup: set env $GIT_WORK_TREE when work tree is set, like $GIT_DIR
In the test case, we run setup_git_dir_gently() the first time to read
$GIT_DIR/config so that we can resolve aliases. We'll enter
setup_discovered_git_dir() and may or may not call set_git_dir() near
the end of the function, depending on whether the detected git dir is
".git" or not. This set_git_dir() will set env var $GIT_DIR.
For normal repo, git dir detected via setup_discovered_git_dir() will be
".git", and set_git_dir() is not called. If .git file is used however,
the git dir can't be ".git" and set_git_dir() is called and $GIT_DIR
set. This is the key of this problem.
If we expand an alias (or autocorrect command names), then
setup_git_dir_gently() is run the second time. If $GIT_DIR is not set in
the first run, we run the same setup_discovered_git_dir() as before.
Nothing to see. If it is, however, we'll enter setup_explicit_git_dir()
this time.
This is where the "fun" is. If $GIT_WORK_TREE is not set but
$GIT_DIR is, you are supposed to be at the root level of the
worktree. But if you are in a subdir "foo/bar" (real worktree's top
is "foo"), this rule bites you: your detected worktree is now
"foo/bar", even though the first run correctly detected worktree as
"foo". You get "internal error: work tree has already been set" as a
result.
Bottom line is, when $GIT_DIR is set, $GIT_WORK_TREE should be set too
unless there's no work tree. But setting $GIT_WORK_TREE inside
set_git_dir() may backfire. We don't know at that point if work tree is
already configured by the caller. So set it when work tree is
detected. It does not harm if $GIT_WORK_TREE is set while $GIT_DIR is
not.
Reported-by: Bjørnar Snoksrud <snoksrud@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If this extension is used in a repository, then no
operations should run which may drop objects from the object
storage. This can be useful if you are sharing that storage
with other repositories whose refs you cannot see.
For instance, if you do:
$ git clone -s parent child
$ git -C parent config extensions.preciousObjects true
$ git -C parent config core.repositoryformatversion 1
you now have additional safety when running git in the
parent repository. Prunes and repacks will bail with an
error, and `git gc` will skip those operations (it will
continue to pack refs and do other non-object operations).
Older versions of git, when run in the repository, will
fail on every operation.
Note that we do not set the preciousObjects extension by
default when doing a "clone -s", as doing so breaks
backwards compatibility. It is a decision the user should
make explicitly.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It can be useful to have grafts or replace refs for specific use-cases while
keeping the default "view" of the repository pristine (or with a different
set of grafts/replace refs).
It is possible to use a different graft file with GIT_GRAFT_FILE, but while
replace refs are more powerful, they don't have an equivalent override.
Add a GIT_REPLACE_REF_BASE environment variable to control where git is
going to look for replace refs.
Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A replacement for contrib/workdir/git-new-workdir that does not
rely on symbolic links and make sharing of objects and refs safer
by making the borrowee and borrowers aware of each other.
* nd/multiple-work-trees: (41 commits)
prune --worktrees: fix expire vs worktree existence condition
t1501: fix test with split index
t2026: fix broken &&-chain
t2026 needs procondition SANITY
git-checkout.txt: a note about multiple checkout support for submodules
checkout: add --ignore-other-wortrees
checkout: pass whole struct to parse_branchname_arg instead of individual flags
git-common-dir: make "modules/" per-working-directory directory
checkout: do not fail if target is an empty directory
t2025: add a test to make sure grafts is working from a linked checkout
checkout: don't require a work tree when checking out into a new one
git_path(): keep "info/sparse-checkout" per work-tree
count-objects: report unused files in $GIT_DIR/worktrees/...
gc: support prune --worktrees
gc: factor out gc.pruneexpire parsing code
gc: style change -- no SP before closing parenthesis
checkout: clean up half-prepared directories in --to mode
checkout: reject if the branch is already checked out elsewhere
prune: strategies for linked checkouts
checkout: support checking out into a new working directory
...
Most operations that iterate over refs are happy to ignore
broken cruft. However, some operations should be performed
with knowledge of these broken refs, because it is better
for the operation to choke on a missing object than it is to
silently pretend that the ref did not exist (e.g., if we are
computing the set of reachable tips in order to prune
objects).
These processes could just call for_each_rawref, except that
ref iteration is often hidden behind other interfaces. For
instance, for a destructive "repack -ad", we would have to
inform "pack-objects" that we are destructive, and then it
would in turn have to tell the revision code that our
"--all" should include broken refs.
It's much simpler to just set a global for "dangerous"
operations that includes broken refs in all iterations.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The point of disallowing ".git" in the index is that we
would never want to accidentally overwrite files in the
repository directory. But this means we need to respect the
filesystem's idea of when two paths are equal. The prior
commit added a helper to make such a comparison for NTFS
and FAT32; let's use it in verify_path().
We make this check optional for two reasons:
1. It restricts the set of allowable filenames, which is
unnecessary for people who are not on NTFS nor FAT32.
In practice this probably doesn't matter, though, as
the restricted names are rather obscure and almost
certainly would never come up in practice.
2. It has a minor performance penalty for every path we
insert into the index.
This patch ties the check to the core.protectNTFS config
option. Though this is expected to be most useful on Windows,
we allow it to be set everywhere, as NTFS may be mounted on
other platforms. The variable does default to on for Windows,
though.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The point of disallowing ".git" in the index is that we
would never want to accidentally overwrite files in the
repository directory. But this means we need to respect the
filesystem's idea of when two paths are equal. The prior
commit added a helper to make such a comparison for HFS+;
let's use it in verify_path.
We make this check optional for two reasons:
1. It restricts the set of allowable filenames, which is
unnecessary for people who are not on HFS+. In practice
this probably doesn't matter, though, as the restricted
names are rather obscure and almost certainly would
never come up in practice.
2. It has a minor performance penalty for every path we
insert into the index.
This patch ties the check to the core.protectHFS config
option. Though this is expected to be most useful on OS X,
we allow it to be set everywhere, as HFS+ may be mounted on
other platforms. The variable does default to on for OS X,
though.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The repo setup procedure is updated to detect $GIT_DIR/commondir and
set $GIT_COMMON_DIR properly.
The core.worktree is ignored when $GIT_COMMON_DIR is set. This is
because the config file is shared in multi-checkout setup, but
checkout directories _are_ different. Making core.worktree effective
in all checkouts mean it's back to a single checkout.
Helped-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This variable is intended to support multiple working directories
attached to a repository. Such a repository may have a main working
directory, created by either "git init" or "git clone" and one or more
linked working directories. These working directories and the main
repository share the same repository directory.
In linked working directories, $GIT_COMMON_DIR must be defined to point
to the real repository directory and $GIT_DIR points to an unused
subdirectory inside $GIT_COMMON_DIR. File locations inside the
repository are reorganized from the linked worktree view point:
- worktree-specific such as HEAD, logs/HEAD, index, other top-level
refs and unrecognized files are from $GIT_DIR.
- the rest like objects, refs, info, hooks, packed-refs, shallow...
are from $GIT_COMMON_DIR (except info/sparse-checkout, but that's
a separate patch)
Scripts are supposed to retrieve paths in $GIT_DIR with "git rev-parse
--git-path", which will take care of "$GIT_DIR vs $GIT_COMMON_DIR"
business.
The redirection is done by git_path(), git_pathdup() and
strbuf_git_path(). The selected list of paths goes to $GIT_COMMON_DIR,
not the other way around in case a developer adds a new
worktree-specific file and it's accidentally promoted to be shared
across repositories (this includes unknown files added by third party
commands)
The list of known files that belong to $GIT_DIR are:
ADD_EDIT.patch BISECT_ANCESTORS_OK BISECT_EXPECTED_REV BISECT_LOG
BISECT_NAMES CHERRY_PICK_HEAD COMMIT_MSG FETCH_HEAD HEAD MERGE_HEAD
MERGE_MODE MERGE_RR NOTES_EDITMSG NOTES_MERGE_WORKTREE ORIG_HEAD
REVERT_HEAD SQUASH_MSG TAG_EDITMSG fast_import_crash_* logs/HEAD
next-index-* rebase-apply rebase-merge rsync-refs-* sequencer/*
shallow_*
Path mapping is NOT done for git_path_submodule(). Multi-checkouts are
not supported as submodules.
Helped-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We allow the user to relocate certain paths out of $GIT_DIR via
environment variables, e.g. GIT_OBJECT_DIRECTORY, GIT_INDEX_FILE and
GIT_GRAFT_FILE. Callers are not supposed to use git_path() or
git_pathdup() to get those paths. Instead they must use
get_object_directory(), get_index_file() and get_graft_file()
respectively. This is inconvenient and could be missed in review (for
example, there's git_path("objects/info/alternates") somewhere in
sha1_file.c).
This patch makes git_path() and git_pathdup() understand those
environment variables. So if you set GIT_OBJECT_DIRECTORY to /foo/bar,
git_path("objects/abc") should return /foo/bar/abc. The same is done
for the two remaining env variables.
"git rev-parse --git-path" is the wrapper for script use.
This patch kinda reverts a0279e1 (setup_git_env: use git_pathdup
instead of xmalloc + sprintf - 2014-06-19) because using git_pathdup
here would result in infinite recursion:
setup_git_env() -> git_pathdup("objects") -> .. -> adjust_git_path()
-> get_object_directory() -> oops, git_object_directory is NOT set
yet -> setup_git_env()
I wanted to make git_pathdup_literal() that skips adjust_git_path().
But that won't work because later on when $GIT_COMMON_DIR is
introduced, git_pathdup_literal("objects") needs adjust_git_path() to
replace $GIT_DIR with $GIT_COMMON_DIR.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"Check the value of an environment and fall back to a known path
inside $GIT_DIR" is repeated a few times to determine the location
of the data store, the index and the graft file, but the return
value of getenv is not guaranteed to survive across further
invocations of setenv or even getenv.
Make sure to xstrdup() the value we receive from getenv(3), and
encapsulate the pattern into a helper function.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is shorter, harder to get wrong, and more clearly
captures the intent.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many people are on filesystems with horrible stat latency (not
limited to Windows but also NFS), which core.preloadindex was
designed to help. We discussed enabling it by default early in 2013
but didn't.
Per
http://thread.gmane.org/gmane.comp.version-control.git/219273/focus=219322
let's enable the setting by default, with the original choice of max
20 threads / min 500 paths per thread parameters.
Signed-off-by: Steve Hoelzer <shoelzer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When core.commentChar is "auto", the comment char starts with '#' as
in default but if it's already in the prepared message, find another
char in a small subset. This should stop surprises because git strips
some lines unexpectedly.
Note that git is not smart enough to recognize '#' as the comment char
in custom templates and convert it if the final comment char is
different. It thinks '#' lines in custom templates as part of the
commit message. So don't use this with custom templates.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The default of 16m causes serious thrashing for large delta chains
combined with large files.
Here are some benchmarks (pu variant of git blame):
time git blame -C src/xdisp.c >/dev/null
for a repository of Emacs repacked with git gc --aggressive (v1.9,
resulting in a window size of 250) located on an SSD drive. The file in
question has about 30000 lines, 1Mb of size, and a history with about
2500 commits.
16m (previous default):
real 3m33.936s
user 2m15.396s
sys 1m17.352s
32m:
real 3m1.319s
user 2m8.660s
sys 0m51.904s
64m:
real 2m20.636s
user 1m55.780s
sys 0m23.964s
96m:
real 2m5.668s
user 1m50.784s
sys 0m14.288s
128m:
real 2m4.337s
user 1m50.764s
sys 0m12.832s
192m:
real 2m3.567s
user 1m49.508s
sys 0m13.312s
Signed-off-by: David Kastrup <dak@gnu.org>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The semantics of this flag was changed in commit
e1111cef23 inline lookup_replace_object() calls
but wasn't renamed at the time to minimize code churn. Rename it now,
and add a comment explaining its use.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fetching from a shallow-cloned repository used to be forbidden,
primarily because the codepaths involved were not carefully vetted
and we did not bother supporting such usage. This attempts to allow
object transfer out of a shallow-cloned repository in a controlled
way (i.e. the receiver become a shallow repository with truncated
history).
* nd/shallow-clone: (31 commits)
t5537: fix incorrect expectation in test case 10
shallow: remove unused code
send-pack.c: mark a file-local function static
git-clone.txt: remove shallow clone limitations
prune: clean .git/shallow after pruning objects
clone: use git protocol for cloning shallow repo locally
send-pack: support pushing from a shallow clone via http
receive-pack: support pushing to a shallow clone via http
smart-http: support shallow fetch/clone
remote-curl: pass ref SHA-1 to fetch-pack as well
send-pack: support pushing to a shallow clone
receive-pack: allow pushes that update .git/shallow
connected.c: add new variant that runs with --shallow-file
add GIT_SHALLOW_FILE to propagate --shallow-file to subprocesses
receive/send-pack: support pushing from a shallow clone
receive-pack: reorder some code in unpack()
fetch: add --update-shallow to accept refs that update .git/shallow
upload-pack: make sure deepening preserves shallow roots
fetch: support fetching from a shallow repository
clone: support remote shallow repository
...
This may be needed when a hook is run after a new shallow pack is
received, but .git/shallow is not settled yet. A temporary shallow
file to plug all loose ends should be used instead. GIT_SHALLOW_FILE
is overriden by --shallow-file.
--shallow-file does not work in this case because the hook may spawn
many git subprocesses and the launch commands do not have
--shallow-file as it's a recent addition.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Leaving only the function definitions and declarations so that any
new topic in flight can still make use of the old functions, replace
existing uses of the prefixcmp() and suffixcmp() with new API
functions.
The change can be recreated by mechanically applying this:
$ git grep -l -e prefixcmp -e suffixcmp -- \*.c |
grep -v strbuf\\.c |
xargs perl -pi -e '
s|!prefixcmp\(|starts_with\(|g;
s|prefixcmp\(|!starts_with\(|g;
s|!suffixcmp\(|ends_with\(|g;
s|suffixcmp\(|!ends_with\(|g;
'
on the result of preparatory changes in this series.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To be able to automatically convert prefixcmp() to starts_with()
we need first to make sure that prefixcmp() is always used in
the same way.
So let's remove " != 0" after prefixcmp().
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function was added in d2b0708 (2008-09-27, add have_git_dir()
function) as a preparation for adbc0b6 (2008-09-30, cygwin: Use native
Win32 API for stat).
However the second referenced commit was reverted in f66450a (2013-06-22,
cygwin: Remove the Win32 l/stat() implementation), so we don't need to
expose this wrapper function any more as a public API.
Signed-off-by: Stefan Beller <stefanbeller@googlemail.com>
Acked-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes reinitializing on a .git file repository work.
This is probably the only case that setup_git_env() (via
set_git_dir()) is called on a .git file. Other cases in
setup_git_dir_gently() and enter_repo() both cover .git file case
explicitly because they need to verify the target repo is valid.
Reported-by: Ximin Luo <infinity0@gmx.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If somebody wants to only know on-disk footprint of an object
without having to know its type or payload size, we can bypass a
lot of code to cheaply learn it.
* jk/cat-file-batch-optim:
Fix some sparse warnings
sha1_object_info_extended: pass object_info to helpers
sha1_object_info_extended: make type calculation optional
packed_object_info: make type lookup optional
packed_object_info: hoist delta type resolution to helper
sha1_loose_object_info: make type lookup optional
sha1_object_info_extended: rename "status" to "type"
cat-file: disable object/refname ambiguity check for batch mode
A common use of "cat-file --batch-check" is to feed a list
of objects from "rev-list --objects" or a similar command.
In this instance, all of our input objects are 40-byte sha1
ids. However, cat-file has always allowed arbitrary revision
specifiers, and feeds the result to get_sha1().
Fortunately, get_sha1() recognizes a 40-byte sha1 before
doing any hard work trying to look up refs, meaning this
scenario should end up spending very little time converting
the input into an object sha1. However, since 798c35f
(get_sha1: warn about full or short object names that look
like refs, 2013-05-29), when we encounter this case, we
spend the extra effort to do a refname lookup anyway, just
to print a warning. This is further exacerbated by ca91993
(get_packed_ref_cache: reload packed-refs file when it
changes, 2013-06-20), which makes individual ref lookup more
expensive by requiring a stat() of the packed-refs file for
each missing ref.
With no patches, this is the time it takes to run:
$ git rev-list --objects --all >objects
$ time git cat-file --batch-check='%(objectname)' <objects
on the linux.git repository:
real 1m13.494s
user 0m25.924s
sys 0m47.532s
If we revert ca91993, the packed-refs up-to-date check, it
gets a little better:
real 0m54.697s
user 0m21.692s
sys 0m32.916s
but we are still spending quite a bit of time on ref lookup
(and we would not want to revert that patch, anyway, which
has correctness issues). If we revert 798c35f, disabling
the warning entirely, we get a much more reasonable time:
real 0m7.452s
user 0m6.836s
sys 0m0.608s
This patch does the moral equivalent of this final case (and
gets similar speedups). We introduce a global flag that
callers of get_sha1() can use to avoid paying the price for
the warning.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
5f44324 (core: log offset pack data accesses happened - 2011-07-06)
provides a way to observe pack access patterns via a config
switch. Setting an environment variable looks more obvious than a
config var, especially when you just need to _observe_, and more
inline with other tracing knobs we have.
Document it as it may be useful for remote troubleshooting.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An aliased command spawned from a bare repository that does not say
it is bare with "core.bare = yes" is treated as non-bare by mistake.
* jk/alias-in-bare:
setup: suppress implicit "." work-tree for bare repos
environment: add GIT_PREFIX to local_repo_env
cache.h: drop LOCAL_REPO_ENV_SIZE
If an explicit GIT_DIR is given without a working tree, we
implicitly assume that the current working directory should
be used as the working tree. E.g.,:
GIT_DIR=/some/repo.git git status
would compare against the cwd.
Unfortunately, we fool this rule for sub-invocations of git
by setting GIT_DIR internally ourselves. For example:
git init foo
cd foo/.git
git status ;# fails, as we expect
git config alias.st status
git status ;# does not fail, but should
What happens is that we run setup_git_directory when doing
alias lookup (since we need to see the config), set GIT_DIR
as a result, and then leave GIT_WORK_TREE blank (because we
do not have one). Then when we actually run the status
command, we do setup_git_directory again, which sees our
explicit GIT_DIR and uses the cwd as an implicit worktree.
It's tempting to argue that we should be suppressing that
second invocation of setup_git_directory, as it could use
the values we already found in memory. However, the problem
still exists for sub-processes (e.g., if "git status" were
an external command).
You can see another example with the "--bare" option, which
sets GIT_DIR explicitly. For example:
git init foo
cd foo/.git
git status ;# fails
git --bare status ;# does NOT fail
We need some way of telling sub-processes "even though
GIT_DIR is set, do not use cwd as an implicit working tree".
We could do it by putting a special token into
GIT_WORK_TREE, but the obvious choice (an empty string) has
some portability problems.
Instead, we add a new boolean variable, GIT_IMPLICIT_WORK_TREE,
which suppresses the use of cwd as a working tree when
GIT_DIR is set. We trigger the new variable when we know we
are in a bare setting.
The variable is left intentionally undocumented, as this is
an internal detail (for now, anyway). If somebody comes up
with a good alternate use for it, and once we are confident
we have shaken any bugs out of it, we can consider promoting
it further.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The GIT_PREFIX variable is set based on our location within
the working tree. It should therefore be cleared whenever
GIT_WORK_TREE is cleared.
In practice, this doesn't cause any bugs, because none of
the sub-programs we invoke with local_repo_env cleared
actually care about GIT_PREFIX. But this is the right thing
to do, and future proofs us against that assumption changing.
While we're at it, let's define a GIT_PREFIX_ENVIRONMENT
macro; this avoids repetition of the string literal, which
can help catch any spelling mistakes in the code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We keep a static array of variables that should be cleared
when invoking a sub-process on another repo. We statically
size the array with the LOCAL_REPO_ENV_SIZE macro so that
any readers do not have to count it themselves.
As it turns out, no readers actually use the macro, and it
creates a maintenance headache, as modifications to the
array need to happen in two places (one to add the new
element, and another to bump the size).
Since it's NULL-terminated, we can just drop the size macro
entirely. While we're at it, we'll clean up some comments
around it, and add a new mention of it at the top of the
list of environment variable macros. Even though
local_repo_env is right below that list, it's easy to miss,
and additions to that list should consider local_repo_env.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow a configuration variable core.commentchar to customize the
character used to comment out the hint lines in the edited text from
the default '#'.
* jc/custom-comment-char:
Allow custom "comment char"
Specifically the fields uid, gid, ctime, ino and dev are set to zero
by JGit. Other implementations, eg. Git in cygwin are allegedly also
somewhat incompatible with Git For Windows and on *nix platforms
the resolution of the timestamps may differ.
Any stat checking by git will then need to check content, which may
be very slow, particularly on Windows. Since mtime and size
is typically enough we should allow the user to tell git to avoid
checking these fields if they are set to zero in the index.
This change introduces a core.checkstat config option where the
the user can select to check all fields (default), or just size
and the whole second part of mtime (minimal).
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some users do want to write a line that begin with a pound sign, #,
in their commit log message. Many tracking system recognise
a token of #<bugid> form, for example.
The support we offer these use cases is not very friendly to the end
users. They have a choice between
- Don't do it. Avoid such a line by rewrapping or indenting; and
- Use --cleanup=whitespace but remove all the hint lines we add.
Give them a way to set a custom comment char, e.g.
$ git -c core.commentchar="%" commit
so that they do not have to do either of the two workarounds.
[jc: although I started the topic, all the tests and documentation
updates, many of the call sites of the new strbuf_add_commented_*()
functions, and the change to git-submodule.sh scripted Porcelain are
from Ralf.]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mac OS X mangles file names containing unicode on file systems HFS+,
VFAT or SAMBA. When a file using unicode code points outside ASCII
is created on a HFS+ drive, the file name is converted into
decomposed unicode and written to disk. No conversion is done if
the file name is already decomposed unicode.
Calling open("\xc3\x84", ...) with a precomposed "Ä" yields the same
result as open("\x41\xcc\x88",...) with a decomposed "Ä".
As a consequence, readdir() returns the file names in decomposed
unicode, even if the user expects precomposed unicode. Unlike on
HFS+, Mac OS X stores files on a VFAT drive (e.g. an USB drive) in
precomposed unicode, but readdir() still returns file names in
decomposed unicode. When a git repository is stored on a network
share using SAMBA, file names are send over the wire and written to
disk on the remote system in precomposed unicode, but Mac OS X
readdir() returns decomposed unicode to be compatible with its
behaviour on HFS+ and VFAT.
The unicode decomposition causes many problems:
- The names "git add" and other commands get from the end user may
often be precomposed form (the decomposed form is not easily input
from the keyboard), but when the commands read from the filesystem
to see what it is going to update the index with already is on the
filesystem, readdir() will give decomposed form, which is different.
- Similarly "git log", "git mv" and all other commands that need to
compare pathnames found on the command line (often but not always
precomposed form; a command line input resulting from globbing may
be in decomposed) with pathnames found in the tree objects (should
be precomposed form to be compatible with other systems and for
consistency in general).
- The same for names stored in the index, which should be
precomposed, that may need to be compared with the names read from
readdir().
NFS mounted from Linux is fully transparent and does not suffer from
the above.
As Mac OS X treats precomposed and decomposed file names as equal,
we can
- wrap readdir() on Mac OS X to return the precomposed form, and
- normalize decomposed form given from the command line also to the
precomposed form,
to ensure that all pathnames used in Git are always in the
precomposed form. This behaviour can be requested by setting
"core.precomposedunicode" configuration variable to true.
The code in compat/precomposed_utf8.c implements basically 4 new
functions: precomposed_utf8_opendir(), precomposed_utf8_readdir(),
precomposed_utf8_closedir() and precompose_argv(). The first three
are to wrap opendir(3), readdir(3), and closedir(3) functions.
The argv[] conversion allows to use the TAB filename completion done
by the shell on command line. It tolerates other tools which use
readdir() to feed decomposed file names into git.
When creating a new git repository with "git init" or "git clone",
"core.precomposedunicode" will be set "false".
The user needs to activate this feature manually. She typically
sets core.precomposedunicode to "true" on HFS and VFAT, or file
systems mounted via SAMBA.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's no reason anybody outside of ident.c should access
these directly (they should use the new accessors which make
sure the variables are initialized), so we can make them
file-scope statics.
While we're at it, move user_ident_explicitly_given into
ident.c; while still globally visible, it makes more sense
to reside with the ident code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pushing a non-fast-forward update to a remote repository will result in
an error, but the hint text doesn't provide the correct resolution in
every case. Give better resolution advice in three push scenarios:
1) If you push your current branch and it triggers a non-fast-forward
error, you should merge remote changes with 'git pull' before pushing
again.
2) If you push to a shared repository others push to, and your local
tracking branches are not kept up to date, the 'matching refs' default
will generate non-fast-forward errors on outdated branches. If this is
your workflow, the 'matching refs' default is not for you. Consider
setting the 'push.default' configuration variable to 'current' or
'upstream' to ensure only your current branch is pushed.
3) If you explicitly specify a ref that is not your current branch or
push matching branches with ':', you will generate a non-fast-forward
error if any pushed branch tip is out of date. You should checkout the
offending branch and merge remote changes before pushing again.
Teach transport.c to recognize these scenarios and configure push.c
to hint for them. If 'git push's default behavior changes or we
discover more scenarios, extension is easy. Standardize on the
advice API and add three new advice variables, 'pushNonFFCurrent',
'pushNonFFDefault', and 'pushNonFFMatching'. Setting any of these
to 'false' will disable their affiliated advice. Setting
'pushNonFastForward' to false will disable all three, thus preserving the
config option for users who already set it, but guaranteeing new
users won't disable push advice accidentally.
Based-on-patch-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Christopher Tiwald <christiwald@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/stream-to-pack:
bulk-checkin: replace fast-import based implementation
csum-file: introduce sha1file_checkpoint
finish_tmp_packfile(): a helper function
create_tmp_packfile(): a helper function
write_pack_header(): a helper function
Conflicts:
pack.h
