* jj/icase-directory:
Support case folding in git fast-import when core.ignorecase=true
Support case folding for git add when core.ignorecase=true
Add case insensitivity support when using git ls-files
Add case insensitivity support for directories when using git status
Case insensitivity support for .gitignore via core.ignorecase
Add string comparison functions that respect the ignore_case variable.
Makefile & configure: add a NO_FNMATCH_CASEFOLD flag
Makefile & configure: add a NO_FNMATCH flag
Conflicts:
Makefile
config.mak.in
configure.ac
fast-import.c
Commit c84de70 (excluded_1(): support exclude files in index -
2009-08-20) tries to work around the fact that there is no
directory/file information in index entries, therefore
EXC_FLAG_MUSTBEDIR match would fail.
Unfortunately the workaround is flawed. This fixes it.
Reported-by: Thomas Rinderknecht <thomasr@sailguy.org>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When mydir/filea.txt is added, mydir/ is renamed to MyDir/, and
MyDir/fileb.txt is added, running git ls-files mydir only shows
mydir/filea.txt. Running git ls-files MyDir shows MyDir/fileb.txt.
Running git ls-files mYdIR shows nothing.
With this patch running git ls-files for mydir, MyDir, and mYdIR shows
mydir/filea.txt and MyDir/fileb.txt.
Wildcards are not handled case insensitively in this patch. Example:
MyDir/aBc/file.txt is added. git ls-files MyDir/a* works fine, but git
ls-files mydir/a* does not.
Signed-off-by: Joshua Jensen <jjensen@workspacewhiz.com>
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using a case preserving but case insensitive file system, directory
case can differ but still refer to the same physical directory. git
status reports the directory with the alternate case as an Untracked
file. (That is, when mydir/filea.txt is added to the repository and
then the directory on disk is renamed from mydir/ to MyDir/, git status
shows MyDir/ as being untracked.)
Support has been added in name-hash.c for hashing directories with a
terminating slash into the name hash. When index_name_exists() is called
with a directory (a name with a terminating slash), the name is not
found via the normal cache_name_compare() call, but it is found in the
slow_same_name() function.
Additionally, in dir.c, directory_exists_in_index_icase() allows newly
added directories deeper in the directory chain to be identified.
Ultimately, it would be better if the file list was read in case
insensitive alphabetical order from disk, but this change seems to
suffice for now.
The end result is the directory is looked up in a case insensitive
manner and does not show in the Untracked files list.
Signed-off-by: Joshua Jensen <jjensen@workspacewhiz.com>
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is especially beneficial when using Windows and Perforce and the
git-p4 bridge. Internally, Perforce preserves a given file's full path
including its case at the time it was added to the Perforce repository.
When syncing a file down via Perforce, missing directories are created,
if necessary, using the case as stored with the filename. Unfortunately,
two files in the same directory can have differing cases for their
respective paths, such as /diRa/file1.c and /DirA/file2.c. Depending on
sync order, DirA/ may get created instead of diRa/.
It is possible to handle directory names in a case insensitive manner
without this patch, but it is highly inconvenient, requiring each
character to be specified like so: [Bb][Uu][Ii][Ll][Dd]. With this patch, the
gitignore exclusions honor the core.ignorecase=true configuration
setting and make the process less error prone. The above is specified
like so: Build
Signed-off-by: Joshua Jensen <jjensen@workspacewhiz.com>
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Multiple locations within this patch series alter a case sensitive
string comparison call such as strcmp() to be a call to a string
comparison call that selects case comparison based on the global
ignore_case variable. Behaviorally, when core.ignorecase=false, the
*_icase() versions are functionally equivalent to their C runtime
counterparts. When core.ignorecase=true, the *_icase() versions perform
a case insensitive comparison.
Like Linus' earlier ignorecase patch, these may ignore filename
conventions on certain file systems. By isolating filename comparisons
to certain functions, support for those filename conventions may be more
easily met.
Signed-off-by: Joshua Jensen <jjensen@workspacewhiz.com>
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
GCC 4.4.4 on MacOS incorrectly warns about potential use of uninitialized memory.
Signed-off-by: Pat Notz <patnotz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sometimes it is useful to know if a file or directory will be ignored
before it is added to the work tree. An example is "git submodule add",
where it would be really nice to be able to fail with an appropriate
error message before the submodule is cloned and checked out.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* gv/portable:
test-lib: use DIFF definition from GIT-BUILD-OPTIONS
build: propagate $DIFF to scripts
Makefile: Tru64 portability fix
Makefile: HP-UX 10.20 portability fixes
Makefile: HPUX11 portability fixes
Makefile: SunOS 5.6 portability fix
inline declaration does not work on AIX
Allow disabling "inline"
Some platforms lack socklen_t type
Make NO_{INET_NTOP,INET_PTON} configured independently
Makefile: some platforms do not have hstrerror anywhere
git-compat-util.h: some platforms with mmap() lack MAP_FAILED definition
test_cmp: do not use "diff -u" on platforms that lack one
fixup: do not unconditionally disable "diff -u"
tests: use "test_cmp", not "diff", when verifying the result
Do not use "diff" found on PATH while building and installing
enums: omit trailing comma for portability
Makefile: -lpthread may still be necessary when libc has only pthread stubs
Rewrite dynamic structure initializations to runtime assignment
Makefile: pass CPPFLAGS through to fllow customization
Conflicts:
Makefile
wt-status.h
common_prefix() scans backwards from the far end of each 'next'
pathspec, starting from 'len', shortening the 'prefix' using 'path' as
a reference.
However, there is a small opportunity for an out-of-bounds access
because len is unconditionally set to prefix-1 after a "direct match"
test failed. This means that if 'next' is shorter than prefix+2, we
read past it.
Instead of a minimal fix, simplify the loop: scan *forward* over the
'next' entry, remembering the last '/' where it matched the prefix
known so far. This is far easier to read and also has the advantage
that we only scan over each entry once.
Acked-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without this patch at least IBM VisualAge C 5.0 (I have 5.0.2) on AIX
5.1 fails to compile git.
enum style is inconsistent already, with some enums declared on one
line, some over 3 lines with the enum values all on the middle line,
sometimes with 1 enum value per line... and independently of that the
trailing comma is sometimes present and other times absent, often
mixing with/without trailing comma styles in a single file, and
sometimes in consecutive enum declarations.
Clearly, omitting the comma is the more portable style, and this patch
changes all enum declarations to use the portable omitted dangling
comma style consistently.
Signed-off-by: Gary V. Vaughan <gary@thewrittenword.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the current working directory is the same as the work tree path
plus a suffix, e.g. 'work' and 'work-xyz', then the suffix '-xyz'
would be interpreted as a subdirectory of 'work'.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/maint-add-ignored-dir:
tests for "git add ignored-dir/file" without -f
dir: fix COLLECT_IGNORED on excluded prefixes
t0050: mark non-working test as such
As we walk the directory tree, if we see an ignored path, we
want to add it to the ignored list only if it matches any
pathspec that we were given. We used to check for the
pathspec to appear explicitly. E.g., if we see "subdir/file"
and it is excluded, we check to see if we have "subdir/file"
in our pathspec.
However, this interacts badly with the optimization to avoid
recursing into ignored subdirectories. If "subdir" as a
whole is ignored, then we never recurse, and consider only
whether "subdir" itself is in our pathspec. It would not
match a pathspec of "subdir/file" explicitly, even though it
is the reason that subdir/file would be excluded.
This manifests itself to the user as "git add subdir/file"
failing to correctly note that the pathspec was ignored.
This patch extends the in_pathspec logic to include prefix
directory case.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we remove a path in a/deep/subdirectory, we should try to
remove as many trailing components as possible (i.e.,
subdirectory, then deep, then a). However, the test for the
return value of rmdir was reversed, so we only ever deleted
at most one level.
The fix is in remove_path, so "apply" and "merge-recursive"
also are fixed.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit b5041c5 (Avoid writing to buffer in add_excludes_from_file_1())
tried not to append '\n' at the end because the next commit
may return a buffer that does not have extra space for that.
Unfortunately it left this assignment in the loop:
buf[i - (i && buf[i-1] == '\r')] = 0;
that can corrupt memory if "buf" is not '\n' terminated. But even if
it does not corrupt memory, the last line would not be
NULL-terminated, leading to errors later inside add_exclude().
This patch fixes it by reverting the faulty commit and make
sure "buf" is always \n terminated.
While at it, free unused memory properly.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/ls-files-ignored-pathspec:
ls-files: fix overeager pathspec optimization
read_directory(): further split treat_path()
read_directory_recursive(): refactor handling of a single path into a separate function
t3001: test ls-files -o ignored/dir
* nd/sparse: (25 commits)
t7002: test for not using external grep on skip-worktree paths
t7002: set test prerequisite "external-grep" if supported
grep: do not do external grep on skip-worktree entries
commit: correctly respect skip-worktree bit
ie_match_stat(): do not ignore skip-worktree bit with CE_MATCH_IGNORE_VALID
tests: rename duplicate t1009
sparse checkout: inhibit empty worktree
Add tests for sparse checkout
read-tree: add --no-sparse-checkout to disable sparse checkout support
unpack-trees(): ignore worktree check outside checkout area
unpack_trees(): apply $GIT_DIR/info/sparse-checkout to the final index
unpack-trees(): "enable" sparse checkout and load $GIT_DIR/info/sparse-checkout
unpack-trees.c: generalize verify_* functions
unpack-trees(): add CE_WT_REMOVE to remove on worktree alone
Introduce "sparse checkout"
dir.c: export excluded_1() and add_excludes_from_file_1()
excluded_1(): support exclude files in index
unpack-trees(): carry skip-worktree bit over in merged_entry()
Read .gitignore from index if it is skip-worktree
Avoid writing to buffer in add_excludes_from_file_1()
...
Conflicts:
.gitignore
Documentation/config.txt
Documentation/git-update-index.txt
Makefile
entry.c
t/t7002-grep.sh
Given pathspecs that share a common prefix, ls-files optimized its call
into recursive directory reader by starting at the common prefix
directory.
If you have a directory "t" with an untracked file "t/junk" in it, but the
top-level .gitignore file told us to ignore "t/", this resulted in:
$ git ls-files -o --exclude-standard
$ git ls-files -o --exclude-standard t/
t/junk
$ git ls-files -o --exclude-standard t/junk
t/junk
$ cd t && git ls-files -o --exclude-standard
junk
We could argue that you are overriding the ignore file by giving a
patchspec that matches or being in that directory, but it is somewhat
unexpected. Worse yet, these behave differently:
$ git ls-files -o --exclude-standard t/ .
$ git ls-files -o --exclude-standard t/
t/junk
This patch changes the optimization so that it notices when the common
prefix directory that it starts reading from is an ignored one.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The next caller I'll be adding won't have an access to struct dirent
because it won't be reading from a directory stream. Split the main
part of the function further into a separate function to make it usable
by a caller without passing a dirent as long as it knows what type is
feeding the function.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Primarily because I want to reuse it in a separate function later,
but this de-dents a huge function by one tabstop which by itself is
an improvement as well.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These functions are used to handle .gitignore. They are now exported
so that sparse checkout can reuse.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Index does not really have "directories", attempts to match "foo/"
against index will fail unless someone tries to reconstruct directories
from a list of file.
Observing that dtype in this function can never be NULL (otherwise
it would segfault), dtype NULL will be used to say "hey.. you are
matching against index" and behave properly.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds index as a prerequisite for directory listing (with
exclude). At the moment directory listing is used by "git clean",
"git add", "git ls-files" and "git status"/"git commit" and
unpack_trees()-related commands. These commands have been
checked/modified to populate index before doing directory listing.
add_excludes_from_file() does not enable this feature, because it
is used to read .git/info/exclude and some explicit files specified
by "git ls-files".
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the next patch, the buffer that is being used within
add_excludes_from_file_1() comes from another function and does not
have extra space to put \n at the end.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When you have an embedded git work tree in your work tree (be it
an orphaned submodule, or an independent checkout of an unrelated
project), "git clean -d -f" blindly descended into it and removed
everything. This is rarely what the user wants.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we have an up-to-date index entry for a file in that directory, we
can know that the directories leading up to that file must be
directories. No need to do an lstat() on the directory.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On filesystems without d_type, we can look at the cache entry first.
Doing an lstat() can be expensive.
Reported by Dmitry Potapov for Cygwin.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stop the insanity with separate 'path' and 'base' arguments that must
match. We don't need that crazy interface any more, since we cleaned up
handling of 'path' in commit da4b3e8c28.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most of the users of "read_directory()" actually want a much simpler
interface than the whole complex (but rather powerful) one.
In fact 'git add' had already largely abstracted out the core interface
issues into a private "fill_directory()" function that was largely
applicable almost as-is to a number of callers. Yes, 'git add' wants to
do some extra work of its own, specific to the add semantics, but we can
easily split that out, and use the core as a generic function.
This function does exactly that, and now that much simplified
'fill_directory()' function can be shared with a number of callers,
while also ensuring that the rather more complex calling conventions of
read_directory() are used by fewer call-sites.
This also makes the 'common_prefix()' helper function private to dir.c,
since all callers are now in that file.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change calls to die(..., strerror(errno)) to use the new die_errno().
In the process, also make slight style adjustments: at least state
_something_ about the function that failed (instead of just printing
the pathname), and put paths in single quotes.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a path F that matches ignore pattern has a conflict, "git add F"
insisted the -f option be given, which did not make sense. It would have
required -f when the path was originally added, but when resolving a
conflict, it already is tracked.
So this should work (and does):
$ echo file >.gitignore
$ echo content >file
$ git add -f file ;# need -f because we are adding new path
$ echo more content >>file
$ git add file ;# don't need -f; it is not actually an "other" file
This is handled under the hood by the COLLECT_IGNORED option to
read_directory. When that code finds an ignored file, it checks the
index to make sure it is not actually a tracked file. However, the test
it uses does not take into account unmerged entries, and considers them
to still be ignored. "git ls-files" uses a more elaborate test and gets
the right answer and the same test should be used here.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Right now we pass two different pathnames ('path' and 'base') down to
read_directory_recursive(), and the only real reason for that is that we
want to allow an empty 'base' parameter, but when we do so, we need the
pathname to "opendir()" to be "." rather than the empty string.
And rather than handle that confusion in the caller, we can just fix
read_directory_recursive() to handle the case of an empty path itself,
by just passing opendir() a "." ourselves if the path is empty.
This would allow us to then drop one of the pathnames entirely from the
calling convention, but rather than do that, we'll start separating them
out as a "filesystem pathname" (the one we use for filesystem accesses)
and a "git internal base name" (which is the name that we use for git
internally).
That will eventually allow us to do things like handle different
encodings (eg the filesystem pathnames might be Latin1, while git itself
would use UTF-8 for filename information).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
improve error message in config.c
t4018-diff-funcname: add cpp xfuncname pattern to syntax test
Work around BSD whose typeof(tv.tv_sec) != time_t
git-am.txt: reword extra headers in message body
git-am.txt: Use date or value instead of time or timestamp
git-am.txt: add an 'a', say what 'it' is, simplify a sentence
dir.c: Fix two minor grammatical errors in comments
git-svn: fix a sloppy Getopt::Long usage
Essentially; s/type* /type */ as per the coding guidelines.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mv/parseopt-ls-files:
ls-files: fix broken --no-empty-directory
t3000: use test_cmp instead of diff
parse-opt: migrate builtin-ls-files.
Turn the flags in struct dir_struct into a single variable
Conflicts:
builtin-ls-files.c
t/t3000-ls-files-others.sh
* kb/checkout-optim:
Revert "lstat_cache(): print a warning if doing ping-pong between cache types"
checkout bugfix: use stat.mtime instead of stat.ctime in two places
Makefile: Set compiler switch for USE_NSEC
Create USE_ST_TIMESPEC and turn it on for Darwin
Not all systems use st_[cm]tim field for ns resolution file timestamp
Record ns-timestamps if possible, but do not use it without USE_NSEC
write_index(): update index_state->timestamp after flushing to disk
verify_uptodate(): add ce_uptodate(ce) test
make USE_NSEC work as expected
fix compile error when USE_NSEC is defined
check_updates(): effective removal of cache entries marked CE_REMOVE
lstat_cache(): print a warning if doing ping-pong between cache types
show_patch_diff(): remove a call to fstat()
write_entry(): use fstat() instead of lstat() when file is open
write_entry(): cleanup of some duplicated code
create_directories(): remove some memcpy() and strchr() calls
unlink_entry(): introduce schedule_dir_for_removal()
lstat_cache(): swap func(length, string) into func(string, length)
lstat_cache(): generalise longest_match_lstat_cache()
lstat_cache(): small cleanup and optimisation
By having flags represented as bits in the new member variable 'flags',
it will be easier to use parse_options when dir_struct is involved.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"\" was treated differently in exclude rules depending on whether a
wildcard match was done. For wildcard rules, "\" was de-escaped in
fnmatch, but this was not done for other rules since they used strcmp
instead. A file named "#foo" would not be excluded by "\#foo", but would
be excluded by "\#foo*".
We now treat all rules with "\" as wildcard rules.
Another solution could be to de-escape all non-wildcard rules as we
read them, but we would have to do the de-escaping exactly as fnmatch
does it to avoid inconsistencies.
Signed-off-by: Finn Arne Gangstad <finnag@pvv.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Swap function argument pair (length, string) into (string, length) to
conform with the commonly used order inside the GIT source code.
Also, add a note about this fact into the coding guidelines.
Signed-off-by: Kjetil Barvik <barvik@broadpark.no>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace isspecial() by the new macro is_glob_special(), which is more,
well, specialized. The former included the NUL char in its character
class, while the letter only included characters that are special to
file name globbing.
The new name contains underscores because they enhance readability
considerably now that it's made up of three words. Renaming the
function is necessary to document its changed scope.
The call sites of isspecial() are updated to check explicitly for NUL.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Both versions have the same functionality. This removes any
redundancy.
This also adds makes two extensions to match_pathspec:
- If pathspec is NULL, return 1. This reflects the behavior of git
commands, for which no paths usually means "match all paths".
- If seen is NULL, do not use it.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
