* ph/transport-with-gitfile:
Fix is_gitfile() for files too small or larger than PATH_MAX to be a gitfile
Add test showing git-fetch groks gitfiles
Teach transport about the gitfile mechanism
Learn to handle gitfiles in enter_repo
enter_repo: do not modify input
* js/no-cherry-pick-head-after-punted:
cherry-pick: do not give irrelevant advice when cherry-pick punted
revert.c: defer writing CHERRY_PICK_HEAD till it is safe to do so
* bk/submodule-in-recursive-merge:
submodule: Search for merges only at end of recursive merge
submodule: Demonstrate known breakage during recursive merge
Since some tests before test number 79 ("quoting") are skipped, .git/config
does not exist and 'rm .git/config' fails. Fix this particular case.
While at it, move other instance of 'rm .git/config' that occur in this
file inside the test function to document that the test cases want to
protect themselves from remnants of earlier tests.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* pt/mingw-misc-fixes:
t9901: fix line-ending dependency on windows
mingw: ensure sockets are initialized before calling gethostname
mergetools: use the correct tool for Beyond Compare 3 on Windows
t9300: do not run --cat-blob-fd related tests on MinGW
git-svn: On MSYS, escape and quote SVN_SSH also if set by the user
t9001: do not fail only due to CR/LF issues
t1020: disable the pwd test on MinGW
* jk/http-auth:
http_init: accept separate URL parameter
http: use hostname in credential description
http: retry authentication failures for all http requests
remote-curl: don't retry auth failures with dumb protocol
improve httpd auth tests
url: decode buffers that are not NUL-terminated
Test 5550 was apparently using the default port number by mistake.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2c5c66b (Merge branch 'jp/get-ref-dir-unsorted', 2011-10-10) merged a
topic that forked from the mainline before a new helper function
get_packed_refs() refactored code to read packed-refs file. The merge made
the call to the helper function with an incorrect argument. The parameter
to the function has to be a path to the submodule.
Fix the mismerge.
Helped-by: Mark Levedahl <mlevedahl@gmail.com>
Helped-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow the user to check the patch set before it is commited to SVN. It is
then possible to accept/discard one patch, accept all, or quit.
This interactive mode is similar with 'git send email' behaviour. However,
'git svn dcommit' returns as soon as one patch is discarded.
Part of the code was taken from git-send-email.perl (see 'ask' function)
Tests several combinations of potential answers to
'git svn dcommit --interactive'. For each of them, test whether patches
were commited to SVN or not.
Thanks-to Eric Wong <normalperson@yhbt.net> for the initial idea.
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Frédéric Heitzmann <frederic.heitzmann@gmail.com>
Until now, a request for an http password looked like:
Username:
Password:
Now it will look like:
Username for 'example.com':
Password for 'example.com':
Picked-from: Jeff King <peff@peff.net>
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As diagnosed by Johannes Sixt, msys.dll does not hand through file
descriptors > 2 to child processes, so these test cases cannot passes when
run through an MSys bash.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It fails both for line ending and for DOS path reasons.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
cec5dae (use new Git::config_path() for aliasesfile, 2011-09-30) broke
the expansion of aliases.
This was caused by treating %config_path_settings, newly introduced in
said patch, like %config_bool_settings instead of like %config_settings.
Copy from %config_settings, making it more readable.
While at it add basic test for expansion of aliases, and for path
expansion, which would catch this error.
Nb. there were a few issues that were responsible for this error:
1. %config_bool_settings and %config_settings despite similar name have
different semantic.
%config_bool_settings values are arrays where the first element is
(reference to) the variable to set, and second element is default
value... which admittedly is a bit cryptic. More readable if more
verbose option would be to use hash reference, e.g.:
my %config_bool_settings = (
"thread" => { variable => \$thread, default => 1},
[...]
%config_settings values are either either reference to scalar variable
or reference to array. In second case it means that option (or config
option) is multi-valued. BTW. this is similar to what Getopt::Long does.
2. In cec5dae (use new Git::config_path() for aliasesfile, 2011-09-30)
the setting "aliasesfile" was moved from %config_settings to newly
introduced %config_path_settings. But the loop that parses settings
from %config_path_settings was copy'n'pasted *wrongly* from
%config_bool_settings instead of from %config_settings.
It looks like cec5dae author cargo-culted this change...
3. 994d6c6 (send-email: address expansion for common mailers, 2006-05-14)
didn't add test for alias expansion to t9001-send-email.sh
Signed-off-by: Cord Seele <cowose@gmail.com>
Tested-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For some reason $LOGNAME is not set anymore for me after an upgrade from
Ubuntu 11.04 to 11.10. Use $USER in such a case.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* rs/pending:
commit: factor out clear_commit_marks_for_object_array
checkout: use leak_pending flag
bundle: use leak_pending flag
bisect: use leak_pending flag
revision: add leak_pending flag
checkout: use add_pending_{object,sha1} in orphan check
revision: factor out add_pending_sha1
checkout: check for "Previous HEAD" notice in t2020
Conflicts:
builtin/checkout.c
revision.c
* nd/maint-sparse-errors:
Add explanation why we do not allow to sparse checkout to empty working tree
sparse checkout: show error messages when worktree shaping fails
Bash on Windows converts program arguments that look like absolute POSIX
paths to their Windows form, i.e., drive-letter-colon format. For this
reason, those tests in t1402 that check refs that begin with a slash do not
work as expected on Windows: valid_ref tests are doomed to fail, and
invalid_ref tests fail for the wrong reason (that there is a colon rather
than that they begin with a slash).
Skip these tests.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The submodule merge search is not useful during virtual merges because
the results cannot be used automatically. Furthermore any suggestions
made by the search may apply to commits different than HEAD:sub and
MERGE_HEAD:sub, thus confusing the user. Skip searching for submodule
merges during a virtual merge such as that between B and C while merging
the heads of:
B---BC
/ \ /
A X
\ / \
C---CB
Run the search only when the recursion level is zero (!o->call_depth).
This fixes known breakage tested in t7405-submodule-merge.
Signed-off-by: Brad King <brad.king@kitware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since commit 68d03e4a (Implement automatic fast-forward merge for
submodules, 2010-07-07) we try to suggest submodule commits that resolve
a conflict. Consider a true recursive merge case
b---bc
/ \ /
o X
\ / \
c---cb
in which the two heads themselves (bc,cb) had resolved a submodule
conflict (i.e. reference different commits than their parents). The
submodule merge search runs during the temporary merge of the two merge
bases (b,c) and prints out a suggestion that is not meaningful to the
user. Then during the main merge the submodule merge search runs again
but dies with the message
fatal: --ancestry-path given but there are no bottom commits
while trying to enumerate candidates. Demonstrate this known breakage
with a new test in t7405-submodule-merge covering the case.
Signed-off-by: Brad King <brad.king@kitware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Implemented internally instead of as "git merge --no-commit && git commit"
so that "merge --edit" is otherwise consistent (hooks, etc) with "merge".
Note: the edit message does not include the status information that one
gets with "commit --status" and it is cleaned up after editing like one
gets with "commit --cleanup=default". A later patch could add the status
information if desired.
Note: previously we were not calling stripspace() after running the
prepare-commit-msg hook. Now we are, stripping comments and
leading/trailing whitespace lines if --edit is given, otherwise only
stripping leading/trailing whitespace lines if not given --edit.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The first and last tests use tabs. The rest uses spaces. Convert all
to tabs.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I noticed this when "git am CORRUPTED" unexpectedly failed with an
odd diagnostic, and even removed one of the files it was supposed
to have patched.
Reproduce with any valid old/new patch from which you have removed
the "+++ b/FILE" line. You'll see a diagnostic like this
fatal: unable to write file '(null)' mode 100644: Bad address
and you'll find that FILE has been removed.
The above is on glibc-based systems. On other systems, rather than
getting "null", you may provoke a segfault as git tries to
dereference the NULL file name.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We should be able to ask for a config value both by its
canonical all-lowercase name (as git does internally), as
well as by random mixed-case (which will be canonicalized by
git-config for us).
Subsections are a tricky point, though. Since we have both
[section "Foo"]
and
[section.Foo]
you might want git-config to canonicalize the subsection or
not, depending on which you are expecting. But there's no
way to communicate this; git-config sees only the key, and
doesn't know which type of section name will be in the
config file.
So it must leave the subsection intact, and it is up to the
caller to provide a canonical version of the subsection if
they want to match the latter form.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a very old script, and did a lot of:
echo whatever >expect
git config foo bar
test_expect_success 'cmp .git/config expect'
which meant that we didn't actually check that the call to
git-config succeeded. Fix this, and while we're at it,
modernize the style to use test_cmp.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When core.ignorecase is true, the file globs configured in the
.gitattributes file should be matched case-insensitively against the paths
in the working directory. Let's do so.
Plus, add some tests.
The last set of tests is performed only on a case-insensitive filesystem.
Those tests make sure that git handles the case where the .gitignore file
resides in a subdirectory and the user supplies a path that does not match
the case in the filesystem. In that case^H^H^H^Hsituation, part of the
path supplied by the user is effectively interpreted case-insensitively,
and part of it is dependent on the setting of core.ignorecase. git will
currently only match the portion of the path below the directory holding
the .gitignore file according to the setting of core.ignorecase.
This is also partly future-proofing. Currently, git builds the attr stack
based on the path supplied by the user, so we don't have to do anything
special (like use strcmp_icase) to handle the parts of that path that don't
match the filesystem with respect to case. If git instead built the attr
stack by scanning the repository, then the paths in the origin field would
not necessarily match the paths supplied by the user. If someone makes a
change like that in the future, these tests will notice.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mh/check-ref-format-3: (23 commits)
add_ref(): verify that the refname is formatted correctly
resolve_ref(): expand documentation
resolve_ref(): also treat a too-long SHA1 as invalid
resolve_ref(): emit warnings for improperly-formatted references
resolve_ref(): verify that the input refname has the right format
remote: avoid passing NULL to read_ref()
remote: use xstrdup() instead of strdup()
resolve_ref(): do not follow incorrectly-formatted symbolic refs
resolve_ref(): extract a function get_packed_ref()
resolve_ref(): turn buffer into a proper string as soon as possible
resolve_ref(): only follow a symlink that contains a valid, normalized refname
resolve_ref(): use prefixcmp()
resolve_ref(): explicitly fail if a symlink is not readable
Change check_refname_format() to reject unnormalized refnames
Inline function refname_format_print()
Make collapse_slashes() allocate memory for its result
Do not allow ".lock" at the end of any refname component
Refactor check_refname_format()
Change check_ref_format() to take a flags argument
Change bad_ref_char() to return a boolean value
...
* mz/remote-rename:
remote: only update remote-tracking branch if updating refspec
remote rename: warn when refspec was not updated
remote: "rename o foo" should not rename ref "origin/bar"
remote: write correct fetch spec when renaming remote 'remote'
